Driver can use this interface to check if there's a function level
reset done in hypervisor. It's helpful when IRQ handler for reset
is not ready, or special handling is required.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: pding <Pixel.Ding@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MMIO space can be blocked on virtualised device. Add this
function to check if MMIO is blocked or not.
Todo: need a reliable method such like communation
with hypervisor.
v2:
- add comments inline
Signed-off-by: pding <Pixel.Ding@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This lock is used during register accessing in SRIOV guest.
The register accessing could happen both in irq enabled and
irq disabled cases. Always use irq-safe lock.
Signed-off-by: Pixel Ding <Pixel.Ding@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Accessing the THIS_MODULE directly is only possible when modules
are enabled, otherwise we get a build failure:
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c: In function 'amdgpu_virt_init_data_exchange':
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:331:20: error: dereferencing pointer to incomplete type 'struct module'
Further, THIS_MODULE is NULL when the driver is built-in, so the
code would likely cause a NULL pointer dereference.
This adds an #ifdef check to avoid the compile-time error, plus
a NULL pointer check before dereferencing THIS_MODULE. It might
be better to find a way to avoid using the module version
altogether.
Fixes: 2dc8f81e4f ("drm/amdgpu: SR-IOV data exchange between PF&VF")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-By: Xiangliang Yu <Xiangliang.Yu@amd.com>
Register accessing is performed when IRQ is disabled. Never sleep in
this function.
Known issue: dead sleep in many use cases of index/data registers.
v2:
- wrap polling fence functions.
- don't trigger IRQ for polling in case of wrongly fence signal.
v3:
- handle wrap round gracefully.
- add comments for polling function
v4:
- don't return negative timeout confused with error code
Signed-off-by: pding <Pixel.Ding@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SR-IOV need to exchange some data between PF&VF through shared VRAM
PF will copy some necessary firmware and information to the shared
VRAM. It also requires some information from VF. PF will send a
key through mailbox2 to help guest calculate checksum so that it can
verify whether the data is correct.
So check the data on the specified offset of the shared VRAM, if the
checksum is right, read values from it and write some VF information
next to the data from PF.
Signed-off-by: Horace Chen <horace.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Split that into vm_bo_base and bo_va to allow other uses as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move the CSA bo_va from the VM to the fpriv structure.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
this is to prevent fence forever waiting if FLR occured
during register accessing.
v2:
use define instead of hardcode for the timeout msec
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The usage of kiq should not depend on the virtualization.
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by:Andres Rodriquez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GPU hypervisor cover all settings of CG and PG, so guest doesn't
need to do anything. Bypass it.
Signed-off-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add two functions to allocate & free MM table memory.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1,KIQ won't touch VRAM so no need to involv HDP flush/invalidate at all.
2,According to CP hw designer KIQ better not use any PM4 package lead to wait behave.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This makes it easier to implement a replace operation.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
this lock is used for sriov_gpu_reset, only get this mutex
can run into sriov_gpu_reset.
we have couple source triggers gpu_reset for SRIOV:
1) submit timedout and trigger reset voluntarily
2) invalid instruction detected by ENGINE and trigger reset voluntarily
2) hypervisor found world switch hang and trigger flr and notify guest to
do reset.
all need take care and we need a mutex to protect the consistency of
reset routine.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
bo_va is being kfree'd twice, once in the call to amdgpu_vm_bo_rmv
and then a short while later. Fix this double free by removing
the 2nd kfree.
Detected by CoverityScan, CID#1399524 ("Double Free")
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Virtual display is default setting for virtualization, enable it.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add high level interfaces that is not relate to specific asic. So
asic files just need to implement the interfaces to support
virtualization.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For virtualization, it is must for driver to use KIQ to access
registers when it is out of GPU full access mode.
v2: agd: rebase
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
for SRIOV usage, CSA is only used per device and each
VM will map on it.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pding