The uses of "rcu_assign_pointer()" are NULLing out the pointers.
According to RCU_INIT_POINTER()'s block comment:
"1. This use of RCU_INIT_POINTER() is NULLing out the pointer"
it is better to use it instead of rcu_assign_pointer() because it has a
smaller overhead.
The following Coccinelle semantic patch was used:
@@
@@
- rcu_assign_pointer
+ RCU_INIT_POINTER
(..., NULL)
Link: http://lkml.kernel.org/p/20140822142822.GA32391@ada
Signed-off-by: Andreea-Cristina Bernat <bernat.ada@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The event trigger code that checks for callback triggers before and
after recording of an event has lots of flags checks. This code is
duplicated throughout the ftrace events, kprobes and system calls.
They all do the exact same checks against the event flags.
Added helper functions ftrace_trigger_soft_disabled(),
event_trigger_unlock_commit() and event_trigger_unlock_commit_regs()
that consolidated the code and these are used instead.
Link: http://lkml.kernel.org/r/20140106222703.5e7dbba2@gandalf.local.home
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There's no reason to use double-underscores for any variable name in
ftrace_syscall_enter()/exit(), since those functions aren't generated
and there's no need to avoid namespace collisions as with the event
macros, which is where the original invocation code came from.
Link: http://lkml.kernel.org/r/0b489c9d1f7ee315cff60fa0e4c2b433ade8ae0d.1389036657.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a generic event_command.set_trigger_filter() op implementation and
have the current set of trigger commands use it - this essentially
gives them all support for filters.
Syntactically, filters are supported by adding 'if <filter>' just
after the command, in which case only events matching the filter will
invoke the trigger. For example, to add a filter to an
enable/disable_event command:
echo 'enable_event:system:event if common_pid == 999' > \
.../othersys/otherevent/trigger
The above command will only enable the system:event event if the
common_pid field in the othersys:otherevent event is 999.
As another example, to add a filter to a stacktrace command:
echo 'stacktrace if common_pid == 999' > \
.../somesys/someevent/trigger
The above command will only trigger a stacktrace if the common_pid
field in the event is 999.
The filter syntax is the same as that described in the 'Event
filtering' section of Documentation/trace/events.txt.
Because triggers can now use filters, the trigger-invoking logic needs
to be moved in those cases - e.g. for ftrace_raw_event_calls, if a
trigger has a filter associated with it, the trigger invocation now
needs to happen after the { assign; } part of the call, in order for
the trigger condition to be tested.
There's still a SOFT_DISABLED-only check at the top of e.g. the
ftrace_raw_events function, so when an event is soft disabled but not
because of the presence of a trigger, the original SOFT_DISABLED
behavior remains unchanged.
There's also a bit of trickiness in that some triggers need to avoid
being invoked while an event is currently in the process of being
logged, since the trigger may itself log data into the trace buffer.
Thus we make sure the current event is committed before invoking those
triggers. To do that, we split the trigger invocation in two - the
first part (event_triggers_call()) checks the filter using the current
trace record; if a command has the post_trigger flag set, it sets a
bit for itself in the return value, otherwise it directly invoks the
trigger. Once all commands have been either invoked or set their
return flag, event_triggers_call() returns. The current record is
then either committed or discarded; if any commands have deferred
their triggers, those commands are finally invoked following the close
of the current event by event_triggers_post_call().
To simplify the above and make it more efficient, the TRIGGER_COND bit
is introduced, which is set only if a soft-disabled trigger needs to
use the log record for filter testing or needs to wait until the
current log record is closed.
The syscall event invocation code is also changed in analogous ways.
Because event triggers need to be able to create and free filters,
this also adds a couple external wrappers for the existing
create_filter and free_filter functions, which are too generic to be
made extern functions themselves.
Link: http://lkml.kernel.org/r/7164930759d8719ef460357f143d995406e4eead.1382622043.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a 'trigger' file for each trace event, enabling 'trace event
triggers' to be set for trace events.
'trace event triggers' are patterned after the existing 'ftrace
function triggers' implementation except that triggers are written to
per-event 'trigger' files instead of to a single file such as the
'set_ftrace_filter' used for ftrace function triggers.
The implementation is meant to be entirely separate from ftrace
function triggers, in order to keep the respective implementations
relatively simple and to allow them to diverge.
The event trigger functionality is built on top of SOFT_DISABLE
functionality. It adds a TRIGGER_MODE bit to the ftrace_event_file
flags which is checked when any trace event fires. Triggers set for a
particular event need to be checked regardless of whether that event
is actually enabled or not - getting an event to fire even if it's not
enabled is what's already implemented by SOFT_DISABLE mode, so trigger
mode directly reuses that. Event trigger essentially inherit the soft
disable logic in __ftrace_event_enable_disable() while adding a bit of
logic and trigger reference counting via tm_ref on top of that in a
new trace_event_trigger_enable_disable() function. Because the base
__ftrace_event_enable_disable() code now needs to be invoked from
outside trace_events.c, a wrapper is also added for those usages.
The triggers for an event are actually invoked via a new function,
event_triggers_call(), and code is also added to invoke them for
ftrace_raw_event calls as well as syscall events.
The main part of the patch creates a new trace_events_trigger.c file
to contain the trace event triggers implementation.
The standard open, read, and release file operations are implemented
here.
The open() implementation sets up for the various open modes of the
'trigger' file. It creates and attaches the trigger iterator and sets
up the command parser. If opened for reading set up the trigger
seq_ops.
The read() implementation parses the event trigger written to the
'trigger' file, looks up the trigger command, and passes it along to
that event_command's func() implementation for command-specific
processing.
The release() implementation does whatever cleanup is needed to
release the 'trigger' file, like releasing the parser and trigger
iterator, etc.
A couple of functions for event command registration and
unregistration are added, along with a list to add them to and a mutex
to protect them, as well as an (initially empty) registration function
to add the set of commands that will be added by future commits, and
call to it from the trace event initialization code.
also added are a couple trigger-specific data structures needed for
these implementations such as a trigger iterator and a struct for
trigger-specific data.
A couple structs consisting mostly of function meant to be implemented
in command-specific ways, event_command and event_trigger_ops, are
used by the generic event trigger command implementations. They're
being put into trace.h alongside the other trace_event data structures
and functions, in the expectation that they'll be needed in several
trace_event-related files such as trace_events_trigger.c and
trace_events.c.
The event_command.func() function is meant to be called by the trigger
parsing code in order to add a trigger instance to the corresponding
event. It essentially coordinates adding a live trigger instance to
the event, and arming the triggering the event.
Every event_command func() implementation essentially does the
same thing for any command:
- choose ops - use the value of param to choose either a number or
count version of event_trigger_ops specific to the command
- do the register or unregister of those ops
- associate a filter, if specified, with the triggering event
The reg() and unreg() ops allow command-specific implementations for
event_trigger_op registration and unregistration, and the
get_trigger_ops() op allows command-specific event_trigger_ops
selection to be parameterized. When a trigger instance is added, the
reg() op essentially adds that trigger to the triggering event and
arms it, while unreg() does the opposite. The set_filter() function
is used to associate a filter with the trigger - if the command
doesn't specify a set_filter() implementation, the command will ignore
filters.
Each command has an associated trigger_type, which serves double duty,
both as a unique identifier for the command as well as a value that
can be used for setting a trigger mode bit during trigger invocation.
The signature of func() adds a pointer to the event_command struct,
used to invoke those functions, along with a command_data param that
can be passed to the reg/unreg functions. This allows func()
implementations to use command-specific blobs and supports code
re-use.
The event_trigger_ops.func() command corrsponds to the trigger 'probe'
function that gets called when the triggering event is actually
invoked. The other functions are used to list the trigger when
needed, along with a couple mundane book-keeping functions.
This also moves event_file_data() into trace.h so it can be used
outside of trace_events.c.
Link: http://lkml.kernel.org/r/316d95061accdee070aac8e5750afba0192fa5b9.1382622043.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Idea-by: Steve Rostedt <rostedt@goodmis.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
It has been reported that boot up with FTRACE_SELFTEST enabled can take a
very long time. There can be stalls of over a minute.
This was tracked down to the synchronize_sched() called when a system call
event is disabled. As the self tests enable and disable thousands of events,
this makes the synchronize_sched() get called thousands of times.
The synchornize_sched() was added with d562aff93b "tracing: Add support
for SOFT_DISABLE to syscall events" which caused this regression (added
in 3.13-rc1).
The synchronize_sched() is to protect against the events being accessed
when a tracer instance is being deleted. When an instance is being deleted
all the events associated to it are unregistered. The synchronize_sched()
makes sure that no more users are running when it finishes.
Instead of calling synchronize_sched() for all syscall events, we only
need to call it once, after the events are unregistered and before the
instance is deleted. The event_mutex is held during this action to
prevent new users from enabling events.
Link: http://lkml.kernel.org/r/20131203124120.427b9661@gandalf.local.home
Reported-by: Petr Mladek <pmladek@suse.cz>
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Petr Mladek <pmladek@suse.cz>
Tested-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The original SOFT_DISABLE patches didn't add support for soft disable
of syscall events; this adds it.
Add an array of ftrace_event_file pointers indexed by syscall number
to the trace array and remove the existing enabled bitmaps, which as a
result are now redundant. The ftrace_event_file structs in turn
contain the soft disable flags we need for per-syscall soft disable
accounting.
Adding ftrace_event_files also means we can remove the USE_CALL_FILTER
bit, thus enabling multibuffer filter support for syscall events.
Link: http://lkml.kernel.org/r/6e72b566e85d8df8042f133efbc6c30e21fb017e.1382620672.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The trace event filters are still tied to event calls rather than
event files, which means you don't get what you'd expect when using
filters in the multibuffer case:
Before:
# echo 'bytes_alloc > 8192' > /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
# cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
bytes_alloc > 8192
# mkdir /sys/kernel/debug/tracing/instances/test1
# echo 'bytes_alloc > 2048' > /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter
# cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
bytes_alloc > 2048
# cat /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter
bytes_alloc > 2048
Setting the filter in tracing/instances/test1/events shouldn't affect
the same event in tracing/events as it does above.
After:
# echo 'bytes_alloc > 8192' > /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
# cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
bytes_alloc > 8192
# mkdir /sys/kernel/debug/tracing/instances/test1
# echo 'bytes_alloc > 2048' > /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter
# cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
bytes_alloc > 8192
# cat /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter
bytes_alloc > 2048
We'd like to just move the filter directly from ftrace_event_call to
ftrace_event_file, but there are a couple cases that don't yet have
multibuffer support and therefore have to continue using the current
event_call-based filters. For those cases, a new USE_CALL_FILTER bit
is added to the event_call flags, whose main purpose is to keep the
old behavior for those cases until they can be updated with
multibuffer support; at that point, the USE_CALL_FILTER flag (and the
new associated call_filter_check_discard() function) can go away.
The multibuffer support also made filter_current_check_discard()
redundant, so this change removes that function as well and replaces
it with filter_check_discard() (or call_filter_check_discard() as
appropriate).
Link: http://lkml.kernel.org/r/f16e9ce4270c62f46b2e966119225e1c3cca7e60.1382620672.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
init_syscall_trace() can only be called during kernel bootup only, so we can
mark it and the functions it calls as __init.
Link: http://lkml.kernel.org/r/51528E89.6080508@huawei.com
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Every perf_trace_buf_prepare() caller does
WARN_ONCE(size > PERF_MAX_TRACE_SIZE, message) and "message" is
almost the same.
Shift this WARN_ONCE() into perf_trace_buf_prepare(). This changes
the meaning of _ONCE, but I think this is fine.
- 4947014 2932448 10104832 17984294 1126b26 vmlinux
+ 4948422 2932448 10104832 17985702 11270a6 vmlinux
on my build.
Link: http://lkml.kernel.org/r/20130617170211.GA19813@redhat.com
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
perf_trace_buf_prepare() + perf_trace_buf_submit(head, task => NULL)
make no sense if hlist_empty(head). Change perf_syscall_enter/exit()
to check sys_data->{enter,exit}_event->perf_events beforehand.
Link: http://lkml.kernel.org/r/20130617170207.GA19806@redhat.com
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
For string without format specifiers, use trace_seq_puts()
or trace_seq_putc().
Link: http://lkml.kernel.org/r/51E3B3AC.1000605@huawei.com
Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
[ fixed a trace_seq_putc(s, " ") to trace_seq_putc(s, ' ') ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
ppc64 has its own syscall prefix like ".SyS" or ".sys". Make the
comment in arch_syscall_match_sym_name() more understandable.
Link: http://lkml.kernel.org/r/513D842F.40205@huawei.com
Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently, the way the latency tracers and snapshot feature works
is to have a separate trace_array called "max_tr" that holds the
snapshot buffer. For latency tracers, this snapshot buffer is used
to swap the running buffer with this buffer to save the current max
latency.
The only items needed for the max_tr is really just a copy of the buffer
itself, the per_cpu data pointers, the time_start timestamp that states
when the max latency was triggered, and the cpu that the max latency
was triggered on. All other fields in trace_array are unused by the
max_tr, making the max_tr mostly bloat.
This change removes the max_tr completely, and adds a new structure
called trace_buffer, that holds the buffer pointer, the per_cpu data
pointers, the time_start timestamp, and the cpu where the latency occurred.
The trace_array, now has two trace_buffers, one for the normal trace and
one for the max trace or snapshot. By doing this, not only do we remove
the bloat from the max_trace but the instances of traces can now use
their own snapshot feature and not have just the top level global_trace have
the snapshot feature and latency tracers for itself.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As we've added __init annotation to field-defining functions, we should
add __refdata annotation to event_call variables, which reference those
functions.
Link: http://lkml.kernel.org/r/51343C1F.2050502@huawei.com
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
These two functions are called during kernel boot only.
Link: http://lkml.kernel.org/r/51258796.7020704@huawei.com
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently the syscall events record into the global buffer. But if
multiple buffers are in place, then we need to have syscall events
record in the proper buffers.
By adding descriptors to pass to the syscall event functions, the
syscall events can now record into the buffers that have been assigned
to them (one event may be applied to mulitple buffers).
This will allow tracing high volume syscalls along with seldom occurring
syscalls without losing the seldom syscall events.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The tracing of ia32 compat system calls has been a bit of a pain as they
use different system call numbers than the 64bit equivalents.
I wrote a simple 'lls' program that lists files. I compiled it as a i686
ELF binary and ran it under a x86_64 box. This is the result:
echo 0 > /debug/tracing/tracing_on
echo 1 > /debug/tracing/events/syscalls/enable
echo 1 > /debug/tracing/tracing_on ; ./lls ; echo 0 > /debug/tracing/tracing_on
grep lls /debug/tracing/trace
[.. skipping calls before TS_COMPAT is set ...]
lls-1127 [005] d... 936.409188: sys_recvfrom(fd: 0, ubuf: 4d560fc4, size: 0, flags: 8048034, addr: 8, addr_len: f7700420)
lls-1127 [005] d... 936.409190: sys_recvfrom -> 0x8a77000
lls-1127 [005] d... 936.409211: sys_lgetxattr(pathname: 0, name: 1000, value: 3, size: 22)
lls-1127 [005] d... 936.409215: sys_lgetxattr -> 0xf76ff000
lls-1127 [005] d... 936.409223: sys_dup2(oldfd: 4d55ae9b, newfd: 4)
lls-1127 [005] d... 936.409228: sys_dup2 -> 0xfffffffffffffffe
lls-1127 [005] d... 936.409236: sys_newfstat(fd: 4d55b085, statbuf: 80000)
lls-1127 [005] d... 936.409242: sys_newfstat -> 0x3
lls-1127 [005] d... 936.409243: sys_removexattr(pathname: 3, name: ffcd0060)
lls-1127 [005] d... 936.409244: sys_removexattr -> 0x0
lls-1127 [005] d... 936.409245: sys_lgetxattr(pathname: 0, name: 19614, value: 1, size: 2)
lls-1127 [005] d... 936.409248: sys_lgetxattr -> 0xf76e5000
lls-1127 [005] d... 936.409248: sys_newlstat(filename: 3, statbuf: 19614)
lls-1127 [005] d... 936.409249: sys_newlstat -> 0x0
lls-1127 [005] d... 936.409262: sys_newfstat(fd: f76fb588, statbuf: 80000)
lls-1127 [005] d... 936.409279: sys_newfstat -> 0x3
lls-1127 [005] d... 936.409279: sys_close(fd: 3)
lls-1127 [005] d... 936.421550: sys_close -> 0x200
lls-1127 [005] d... 936.421558: sys_removexattr(pathname: 3, name: ffcd00d0)
lls-1127 [005] d... 936.421560: sys_removexattr -> 0x0
lls-1127 [005] d... 936.421569: sys_lgetxattr(pathname: 4d564000, name: 1b1abc, value: 5, size: 802)
lls-1127 [005] d... 936.421574: sys_lgetxattr -> 0x4d564000
lls-1127 [005] d... 936.421575: sys_capget(header: 4d70f000, dataptr: 1000)
lls-1127 [005] d... 936.421580: sys_capget -> 0x0
lls-1127 [005] d... 936.421580: sys_lgetxattr(pathname: 4d710000, name: 3000, value: 3, size: 812)
lls-1127 [005] d... 936.421589: sys_lgetxattr -> 0x4d710000
lls-1127 [005] d... 936.426130: sys_lgetxattr(pathname: 4d713000, name: 2abc, value: 3, size: 32)
lls-1127 [005] d... 936.426141: sys_lgetxattr -> 0x4d713000
lls-1127 [005] d... 936.426145: sys_newlstat(filename: 3, statbuf: f76ff3f0)
lls-1127 [005] d... 936.426146: sys_newlstat -> 0x0
lls-1127 [005] d... 936.431748: sys_lgetxattr(pathname: 0, name: 1000, value: 3, size: 22)
Obviously I'm not calling newfstat with a fd of 4d55b085. The calls are
obviously incorrect, and confusing.
Other efforts have been made to fix this:
https://lkml.org/lkml/2012/3/26/367
But the real solution is to rewrite the syscall internals and come up
with a fixed solution. One that doesn't require all the kluge that the
current solution has.
Thus for now, instead of outputting incorrect data, simply ignore them.
With this patch the changes now have:
#> grep lls /debug/tracing/trace
#>
Compat system calls simply are not traced. If users need compat
syscalls, then they should just use the raw syscall tracepoints.
For an architecture to make their compat syscalls ignored, it must
define ARCH_TRACE_IGNORE_COMPAT_SYSCALLS (done in asm/ftrace.h) and also
define an arch_trace_is_compat_syscall() function that will return true
if the current task should ignore tracing the syscall.
I want to stress that this change does not affect actual syscalls in any
way, shape or form. It is only used within the tracing system and
doesn't interfere with the syscall logic at all. The changes are
consolidated nicely into trace_syscalls.c and asm/ftrace.h.
I had to make one small modification to asm/thread_info.h and that was
to remove the include of asm/ftrace.h. As asm/ftrace.h required the
current_thread_info() it was causing include hell. That include was
added back in 2008 when the function graph tracer was added:
commit caf4b323 "tracing, x86: add low level support for ftrace return tracing"
It does not need to be included there.
Link: http://lkml.kernel.org/r/1360703939.21867.99.camel@gandalf.local.home
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Some functions in the syscall tracing is used only locally to
the file, but they are labeled global. Convert them to static functions.
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The functions defined in include/trace/syscalls.h are not used directly
since struct ftrace_event_class was introduced. Remove them from the
header file and rearrange the ftrace_event_class declarations in
trace_syscalls.c.
Link: http://lkml.kernel.org/r/1339112785-21806-2-git-send-email-vnagarnaik@google.com
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch splits trace event initialization in two stages:
* ftrace enable
* sysfs event entry creation
This allows to capture trace events from an earlier point
by using 'trace_event' kernel parameter and is important
to trace boot-up allocations.
Note that, in order to enable events at core_initcall,
it's necessary to move init_ftrace_syscalls() from
core_initcall to early_initcall.
Link: http://lkml.kernel.org/r/1347461277-25302-1-git-send-email-elezegarcia@gmail.com
Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
syscall_get_nr can return -1 in the case that the task is not executing
a system call.
This patch fixes perf_syscall_{enter,exit} to check that the syscall
number is valid before using it as an index into a bitmap.
Link: http://lkml.kernel.org/r/1345137254-7377-1-git-send-email-will.deacon@arm.com
Cc: Jason Baron <jbaron@redhat.com>
Cc: Wade Farnsworth <wade_farnsworth@mentor.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
A few events are interesting not only for a current task.
For example, sched_stat_* events are interesting for a task
which wakes up. For this reason, it will be good if such
events will be delivered to a target task too.
Now a target task can be set by using __perf_task().
The original idea and a draft patch belongs to Peter Zijlstra.
I need these events for profiling sleep times. sched_switch is used for
getting callchains and sched_stat_* is used for getting time periods.
These events are combined in user space, then it can be analyzed by
perf tools.
Inspired-by: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arun Sharma <asharma@fb.com>
Signed-off-by: Andrew Vagin <avagin@openvz.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1342016098-213063-1-git-send-email-avagin@openvz.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Adding TRACE_REG_PERF_ADD and TRACE_REG_PERF_DEL to handle
perf event schedule in/out actions.
The add action is invoked for when the perf event is scheduled in,
while the del action is invoked when the event is scheduled out.
Link: http://lkml.kernel.org/r/1329317514-8131-4-git-send-email-jolsa@redhat.com
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Adding TRACE_REG_PERF_OPEN and TRACE_REG_PERF_CLOSE to differentiate
register/unregister from open/close actions.
The register/unregister actions are invoked for the first/last
tracepoint user when opening/closing the event.
The open/close actions are invoked for each tracepoint user when
opening/closing the event.
Link: http://lkml.kernel.org/r/1329317514-8131-3-git-send-email-jolsa@redhat.com
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The advantage of kcalloc is, that will prevent integer overflows which could
result from the multiplication of number of elements and size and it is also
a bit nicer to read.
The semantic patch that makes this change is available
in https://lkml.org/lkml/2011/11/25/107
Link: http://lkml.kernel.org/r/1322600880.1534.347.camel@localhost.localdomain
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
These files are doing things like module_put and try_module_get
so they need to call out the module.h for explicit inclusion,
rather than getting it via <linux/device.h> which we ideally want
to remove the module.h inclusion from.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Many system calls are unimplemented and mapped to sys_ni_syscall, but at
boot ftrace would still search through every syscall metadata entry for
a match which wouldn't be there.
This patch adds causes the search to terminate early if the system call
is not mapped.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
LKML-Reference: <1296703645-18718-7-git-send-email-imunsie@au1.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Some architectures have unusual symbol names and the generic code to
match the symbol name with the function name for the syscall metadata
will fail. For example, symbols on PPC64 start with a period and the
generic code will fail to match them.
This patch moves the match logic out into a separate function which an
arch can override by defining ARCH_HAS_SYSCALL_MATCH_SYM_NAME in
asm/ftrace.h and implementing arch_syscall_match_sym_name.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
LKML-Reference: <1296703645-18718-5-git-send-email-imunsie@au1.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Some architectures use non-trivial system call tables and will not work
with the generic arch_syscall_addr code. For example, PowerPC64 uses a
table of twin long longs.
This patch makes the generic arch_syscall_addr weak to allow
architectures with non-trivial system call tables to override it.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
LKML-Reference: <1296703645-18718-4-git-send-email-imunsie@au1.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
With the ftrace events now checking if the syscall_nr is valid upon
initialisation it should no longer be possible to register or unregister
a syscall event without a valid syscall_nr since they should not be
created. This adds a WARN_ON_ONCE in the register and unregister
functions to locate potential regressions in the future.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
LKML-Reference: <1296703645-18718-3-git-send-email-imunsie@au1.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
FTRACE_SYSCALLS would create events for each and every system call, even
if it had failed to map the system call's name with it's number. This
resulted in a number of events being created that would not behave as
expected.
This could happen, for example, on architectures who's symbol names are
unusual and will not match the system call name. It could also happen
with system calls which were mapped to sys_ni_syscall.
This patch changes the default system call number in the metadata to -1.
If the system call name from the metadata is not successfully mapped to
a system call number during boot, than the event initialisation routine
will now return an error, preventing the event from being created.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
LKML-Reference: <1296703645-18718-2-git-send-email-imunsie@au1.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently the syscall_meta structures for the syscall tracepoints are
placed in the __syscall_metadata section, and at link time, the linker
makes one large array of all these syscall metadata structures. On boot
up, this array is read (much like the initcall sections) and the syscall
data is processed.
The problem is that there is no guarantee that gcc will place complex
structures nicely together in an array format. Two structures in the
same file may be placed awkwardly, because gcc has no clue that they
are suppose to be in an array.
A hack was used previous to force the alignment to 4, to pack the
structures together. But this caused alignment issues with other
architectures (sparc).
Instead of packing the structures into an array, the structures' addresses
are now put into the __syscall_metadata section. As pointers are always the
natural alignment, gcc should always pack them tightly together
(otherwise initcall, extable, etc would also fail).
By having the pointers to the structures in the section, we can still
iterate the trace_events without causing unnecessary alignment problems
with other architectures, or depending on the current behaviour of
gcc that will likely change in the future just to tick us kernel developers
off a little more.
The __syscall_metadata section is also moved into the .init.data section
as it is now only needed at boot up.
Suggested-by: David Miller <davem@davemloft.net>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There is no need for syscall_exit_fields as the syscall
exit event class can already host the fields in its structure,
like most other trace events do by default. Use that
default behavior instead.
Following this scheme, we don't need anymore to override the
get_fields() callback of the syscall exit event class either.
Hence both syscall_exit_fields and syscall_get_exit_fields() can
be removed.
Also changed some indentation to keep the following under 80
characters:
".fields = LIST_HEAD_INIT(event_class_syscall_exit.fields),"
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <4D301C0E.8090408@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
All syscall exit events have the same fields.
The kernel size drops 2.5K:
text data bss dec hex filename
7018612 2034376 7251132 16304120 f8c7f8 vmlinux.o.orig
7018612 2031888 7251132 16301632 f8be40 vmlinux.o
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4BFA3746.8070100@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
tracepoint_probe_unregister() does not synchronize against the probe
callbacks, so do that explicitly. This properly serializes the callbacks
and the free of the data used therein.
Also, use this_cpu_ptr() where possible.
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1274438476.1674.1702.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Avoid the swevent hash-table by using per-tracepoint
hlists.
Also, avoid conditionals on the fast path by ordering
with probe unregister so that we should never get on
the callback path without the data being there.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20100521090710.473188012@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When we've got but a single event per tracepoint
there is no reason to try and multiplex it so don't.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Now that the trace_event structure is embedded in the ftrace_event_call
structure, there is no need for the ftrace_event_call id field.
The id field is the same as the trace_event type field.
Removing the id and re-arranging the structure brings down the tracepoint
footprint by another 5K.
text data bss dec hex filename
4913961 1088356 861512 6863829 68bbd5 vmlinux.orig
4895024 1023812 861512 6780348 6775bc vmlinux.print
4894944 1018052 861512 6774508 675eec vmlinux.id
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently, every event has its own trace_event structure. This is
fine since the structure is needed anyway. But the print function
structure (trace_event_functions) is now separate. Since the output
of the trace event is done by the class (with the exception of events
defined by DEFINE_EVENT_PRINT), it makes sense to have the class
define the print functions that all events in the class can use.
This makes a bigger deal with the syscall events since all syscall events
use the same class. The savings here is another 30K.
text data bss dec hex filename
4913961 1088356 861512 6863829 68bbd5 vmlinux.orig
4900382 1048964 861512 6810858 67ecea vmlinux.init
4900446 1049028 861512 6810986 67ed6a vmlinux.preprint
4895024 1023812 861512 6780348 6775bc vmlinux.print
To accomplish this, and to let the class know what event is being
printed, the event structure is embedded in the ftrace_event_call
structure. This should not be an issues since the event structure
was created for each event anyway.
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Multiple events may use the same method to print their data.
Instead of having all events have a pointer to their print funtions,
the trace_event structure now points to a trace_event_functions structure
that will hold the way to print ouf the event.
The event itself is now passed to the print function to let the print
function know what kind of event it should print.
This opens the door to consolidating the way several events print
their output.
text data bss dec hex filename
4913961 1088356 861512 6863829 68bbd5 vmlinux.orig
4900382 1048964 861512 6810858 67ecea vmlinux.init
4900446 1049028 861512 6810986 67ed6a vmlinux.preprint
This change slightly increases the size but is needed for the next change.
v3: Fix the branch tracer events to handle this change.
v2: Fix the new function graph tracer event calls to handle this change.
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The raw_init function pointer in the event is used to initialize
various kinds of events. The type of initialization needed is usually
classed to the kind of event it is.
Two events with the same class will always have the same initialization
function, so it makes sense to move this to the class structure.
Perhaps even making a special system structure would work since
the initialization is the same for all events within a system.
But since there's no system structure (yet), this will just move it
to the class.
text data bss dec hex filename
4913961 1088356 861512 6863829 68bbd5 vmlinux.orig
4900375 1053380 861512 6815267 67fe23 vmlinux.fields
4900382 1048964 861512 6810858 67ecea vmlinux.init
The text grew very slightly, but this is a constant growth that happened
with the changing of the C files that call the init code.
The bigger savings is the data which will be saved the more events share
a class.
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Move the defined fields from the event to the class structure.
Since the fields of the event are defined by the class they belong
to, it makes sense to have the class hold the information instead
of the individual events. The events of the same class would just
hold duplicate information.
After this change the size of the kernel dropped another 3K:
text data bss dec hex filename
4913961 1088356 861512 6863829 68bbd5 vmlinux.orig
4900252 1057412 861512 6819176 680d68 vmlinux.regs
4900375 1053380 861512 6815267 67fe23 vmlinux.fields
Although the text increased, this was mainly due to the C files
having to adapt to the change. This is a constant increase, where
new tracepoints will not increase the Text. But the big drop is
in the data size (as well as needed allocations to hold the fields).
This will give even more savings as more tracepoints are created.
Note, if just TRACE_EVENT()s are used and not DECLARE_EVENT_CLASS()
with several DEFINE_EVENT()s, then the savings will be lost. But
we are pushing developers to consolidate events with DEFINE_EVENT()
so this should not be an issue.
The kprobes define a unique class to every new event, but are dynamic
so it should not be a issue.
The syscalls however have a single class but the fields for the individual
events are different. The syscalls use a metadata to define the
fields. I moved the fields list from the event to the metadata and
added a "get_fields()" function to the class. This function is used
to find the fields. For normal events and kprobes, get_fields() just
returns a pointer to the fields list_head in the class. For syscall
events, it returns the fields list_head in the metadata for the event.
v2: Fixed the syscall fields. The syscall metadata needs a list
of fields for both enter and exit.
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch removes the register functions of TRACE_EVENT() to enable
and disable tracepoints. The registering of a event is now down
directly in the trace_events.c file. The tracepoint_probe_register()
is now called directly.
The prototypes are no longer type checked, but this should not be
an issue since the tracepoints are created automatically by the
macros. If a prototype is incorrect in the TRACE_EVENT() macro, then
other macros will catch it.
The trace_event_class structure now holds the probes to be called
by the callbacks. This removes needing to have each event have
a separate pointer for the probe.
To handle kprobes and syscalls, since they register probes in a
different manner, a "reg" field is added to the ftrace_event_class
structure. If the "reg" field is assigned, then it will be called for
enabling and disabling of the probe for either ftrace or perf. To let
the reg function know what is happening, a new enum (trace_reg) is
created that has the type of control that is needed.
With this new rework, the 82 kernel events and 618 syscall events
has their footprint dramatically lowered:
text data bss dec hex filename
4913961 1088356 861512 6863829 68bbd5 vmlinux.orig
4914025 1088868 861512 6864405 68be15 vmlinux.class
4918492 1084612 861512 6864616 68bee8 vmlinux.tracepoint
4900252 1057412 861512 6819176 680d68 vmlinux.regs
The size went from 6863829 to 6819176, that's a total of 44K
in savings. With tracepoints being continuously added, this is
critical that the footprint becomes minimal.
v5: Added #ifdef CONFIG_PERF_EVENTS around a reference to perf
specific structure in trace_events.c.
v4: Fixed trace self tests to check probe because regfunc no longer
exists.
v3: Updated to handle void *data in beginning of probe parameters.
Also added the tracepoint: check_trace_callback_type_##call().
v2: Changed the callback probes to pass void * and typecast the
value within the function.
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch adds data to be passed to tracepoint callbacks.
The created functions from DECLARE_TRACE() now need a mandatory data
parameter. For example:
DECLARE_TRACE(mytracepoint, int value, value)
Will create the register function:
int register_trace_mytracepoint((void(*)(void *data, int value))probe,
void *data);
As the first argument, all callbacks (probes) must take a (void *data)
parameter. So a callback for the above tracepoint will look like:
void myprobe(void *data, int value)
{
}
The callback may choose to ignore the data parameter.
This change allows callbacks to register a private data pointer along
with the function probe.
void mycallback(void *data, int value);
register_trace_mytracepoint(mycallback, mydata);
Then the mycallback() will receive the "mydata" as the first parameter
before the args.
A more detailed example:
DECLARE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status));
/* In the C file */
DEFINE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status));
[...]
trace_mytracepoint(status);
/* In a file registering this tracepoint */
int my_callback(void *data, int status)
{
struct my_struct my_data = data;
[...]
}
[...]
my_data = kmalloc(sizeof(*my_data), GFP_KERNEL);
init_my_data(my_data);
register_trace_mytracepoint(my_callback, my_data);
The same callback can also be registered to the same tracepoint as long
as the data registered is different. Note, the data must also be used
to unregister the callback:
unregister_trace_mytracepoint(my_callback, my_data);
Because of the data parameter, tracepoints declared this way can not have
no args. That is:
DECLARE_TRACE(mytracepoint, TP_PROTO(void), TP_ARGS());
will cause an error.
If no arguments are needed, a new macro can be used instead:
DECLARE_TRACE_NOARGS(mytracepoint);
Since there are no arguments, the proto and args fields are left out.
This is part of a series to make the tracepoint footprint smaller:
text data bss dec hex filename
4913961 1088356 861512 6863829 68bbd5 vmlinux.orig
4914025 1088868 861512 6864405 68be15 vmlinux.class
4918492 1084612 861512 6864616 68bee8 vmlinux.tracepoint
Again, this patch also increases the size of the kernel, but
lays the ground work for decreasing it.
v5: Fixed net/core/drop_monitor.c to handle these updates.
v4: Moved the DECLARE_TRACE() DECLARE_TRACE_NOARGS out of the
#ifdef CONFIG_TRACE_POINTS, since the two are the same in both
cases. The __DECLARE_TRACE() is what changes.
Thanks to Frederic Weisbecker for pointing this out.
v3: Made all register_* functions require data to be passed and
all callbacks to take a void * parameter as its first argument.
This makes the calling functions comply with C standards.
Also added more comments to the modifications of DECLARE_TRACE().
v2: Made the DECLARE_TRACE() have the ability to pass arguments
and added a new DECLARE_TRACE_NOARGS() for tracepoints that
do not need any arguments.
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch creates a ftrace_event_class struct that event structs point to.
This class struct will be made to hold information to modify the
events. Currently the class struct only holds the events system name.
This patch slightly increases the size, but this change lays the ground work
of other changes to make the footprint of tracepoints smaller.
With 82 standard tracepoints, and 618 system call tracepoints
(two tracepoints per syscall: enter and exit):
text data bss dec hex filename
4913961 1088356 861512 6863829 68bbd5 vmlinux.orig
4914025 1088868 861512 6864405 68be15 vmlinux.class
This patch also cleans up some stale comments in ftrace.h.
v2: Fixed missing semi-colon in macro.
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Andreea-Cristina Bernat