A TARGET which failed to be built/installed should not be included in the
runlist generated inside the run_kselftest.sh script.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Let the user specify an optional TARGETS skiplist through the new optional
SKIP_TARGETS Makefile variable.
It is easier to skip at will using a reduced and well defined list of
possibly problematic targets with SKIP_TARGETS than to provide a partially
stripped down list of good targets using the usual TARGETS variable.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add kselftest-all target to build tests from the top level
Makefile. This is to simplify kselftest use-cases for CI and
distributions where build and test systems are different.
Current kselftest target builds and runs tests on a development
system which is a developer use-case.
Add kselftest-install target to install tests from the top level
Makefile. This is to simplify kselftest use-cases for CI and
distributions where build and test systems are different.
This change addresses requests from developers and testers to add
support for installing kselftest from the main Makefile.
In addition, make the install directory the same when install is
run using "make kselftest-install" or by running kselftest_install.sh.
Also fix the INSTALL_PATH variable conflict between main Makefile and
selftests Makefile.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When doing "make kselftest TARGETS=bpf -j12", bpf progs end up being
compiled sequentially and thus slowly.
The reason is that parent make (tools/testing/selftests/Makefile) does
not share its jobserver with child make
(tools/testing/selftests/bpf/Makefile), therefore the latter runs with
-j1.
Change all instances of "make" to "$(MAKE)", so that the whole make
hierarchy runs using a single jobserver.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Commit 25b146c5b8 ("kbuild: allow Kbuild to start from any directory")
deprecated KBUILD_SRCTREE.
It is only used in tools/testing/selftest/ to distinguish out-of-tree
build. Replace it with a new boolean flag, building_out_of_srctree.
I also replaced the conditional ($(srctree),.) because the next commit
will allow an absolute path to be used for $(srctree) even when building
in the source tree.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Running "make kselftest" or building selftests when KBUILD_OUTPUT
is set, will create selftest objects in the KBUILD_OUTPUT directory.
This could be undesirable especially when user didn't intend to
relocate selftest objects.
Use KBUILD_OUTPUT/kselftest to create selftest objects instead of
cluttering the main directory.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Install target fails when INSTALL_PATH is undefined. Fix install target
to use "output_dir/install as the default install location. "output_dir"
is either the root of selftests directory under kernel source tree or
output directory specified by O= or KBUILD_OUTPUT.
e.g:
make -C tools/testing/selftests install
<installs under tools/testing/selftests/install>
make O=/tmp/kselftest -C tools/testing/selftests install
<installs under /tmp/kselftest/install>
export KBUILD_OUTPUT=/tmp/kselftest
make -C tools/testing/selftests install
<installs under /tmp/kselftest/install>
In addition, add "all" target as dependency to "install" to build and
install using a single command.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Since sub-testing can now be detected by indentation level, this removes
KSFT_TAP_LEVEL so that subtests report their TAP header for later parsing.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This changes the selftest output so that each test's output is prefixed
with "# " as a TAP "diagnostic line".
This creates a bit of a kernel-specific TAP dialect where the diagnostics
precede the results. The TAP spec isn't entirely clear about this, though,
so I think it's the correct solution so as to keep interactive runs making
sense. If the output _followed_ the result line in the spec-suggested
YAML form, each test would dump all of its output at once instead of as
it went, making debugging harder.
This does, however, solve the recursive TAP output problem, as sub-tests
will simply be prefixed by "# ". Parsing sub-tests becomes a simple
problem of just removing the first two characters of a given top-level
test's diagnostic output, and parsing the results.
Note that the shell construct needed to both get an exit code from
the first command in a pipe and still filter the pipe (to add the "# "
prefix) uses a POSIX solution rather than the bash "pipefail" option
which is not supported by dash.
Since some test environments may have a very minimal set of utilities
available, the new prefixing code will fall back to doing line-at-a-time
prefixing if perl and/or stdbuf are not available.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This moves the logic for running multiple tests into a single "run_many"
function of runner.sh. Both "run_tests" and "emit_tests" are modified to
use it. Summary handling is now controlled by the "per_test_logging"
shell flag.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This reuses the new runner.sh for the emit targets instead of manually
running each test via run_kselftest.sh.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Build and run gpio when output directory is the src dir. gpio has
dependency on tools/gpio and builds tools/gpio objects in the src
directory in all cases making the src repo dirty even when object
relocation is specified.
This fixes the following commands from generating gpio objects in
the source repository:
make O=dir kselftest
export KBUILD_OUTPUT=dir; make kselftest
make O=dir -C tools/testing/selftests
expoert KBUILD_OUTPUT=dir; make -C tools/testing/selftests
The following commands still build gpio objects in the source repo
(gpio Makefile needs to fixed):
make O=dir kselftest TARGETS="gpio"
export KBUILD_OUTPUT=dir; make kselftest TARGETS="gpio"
make O=dir -C tools/testing/selftests TARGETS="gpio"
expoert KBUILD_OUTPUT=dir; make -C tools/testing/selftests TARGETS="gpio"
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
"make kselftest" fails with "Circular Makefile.o <- prepare dependency
dropped." error, when lib.mk invokes "make headers_install".
Make level 0: Main make calls selftests run_tests target
...
Make level n: selftests lib.mk invokes main make's headers_install
The secondary level make inherits builtin-rules which will use the rule
to generate Makefile.o and runs into "Circular Makefile.o <- prepare
dependency dropped." error, and kselftest compile fails.
Invoke headers_install target with --no-builtin-rules to avoid circular
error.
In addition, lib.mk installs headers in the default HDR_PATH, even when
build relocation is requested with O= or export KBUILD_OUTPUT. Fix the
problem by passing in INSTALL_HDR_PATH. The headers are installed under
the specified output "dir/usr".
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
As requested move the existing kexec_load selftest and subsequent kexec
tests to the selftests/kexec directory.
Suggested-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=yOWp
-----END PGP SIGNATURE-----
Merge tag 'pidfd-v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull pidfd system call from Christian Brauner:
"This introduces the ability to use file descriptors from /proc/<pid>/
as stable handles on struct pid. Even if a pid is recycled the handle
will not change. For a start these fds can be used to send signals to
the processes they refer to.
With the ability to use /proc/<pid> fds as stable handles on struct
pid we can fix a long-standing issue where after a process has exited
its pid can be reused by another process. If a caller sends a signal
to a reused pid it will end up signaling the wrong process.
With this patchset we enable a variety of use cases. One obvious
example is that we can now safely delegate an important part of
process management - sending signals - to processes other than the
parent of a given process by sending file descriptors around via scm
rights and not fearing that the given process will have been recycled
in the meantime. It also allows for easy testing whether a given
process is still alive or not by sending signal 0 to a pidfd which is
quite handy.
There has been some interest in this feature e.g. from systems
management (systemd, glibc) and container managers. I have requested
and gotten comments from glibc to make sure that this syscall is
suitable for their needs as well. In the future I expect it to take on
most other pid-based signal syscalls. But such features are left for
the future once they are needed.
This has been sitting in linux-next for quite a while and has not
caused any issues. It comes with selftests which verify basic
functionality and also test that a recycled pid cannot be signaled via
a pidfd.
Jon has written about a prior version of this patchset. It should
cover the basic functionality since not a lot has changed since then:
https://lwn.net/Articles/773459/
The commit message for the syscall itself is extensively documenting
the syscall, including it's functionality and extensibility"
* tag 'pidfd-v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
selftests: add tests for pidfd_send_signal()
signal: add pidfd_send_signal() syscall
Pull tpm updates from James Morris:
- Clean up the transmission flow
Cleaned up the whole transmission flow. Locking of the chip is now
done in the level of tpm_try_get_ops() and tpm_put_ops() instead
taking the chip lock inside tpm_transmit(). The nested calls inside
tpm_transmit(), used with the resource manager, have been refactored
out.
Should make easier to perform more complex transactions with the TPM
without making the subsystem a bigger mess (e.g. encrypted channel
patches by James Bottomley).
- PPI 1.3 support
TPM PPI 1.3 introduces an additional optional command parameter that
may be needed for some commands. Display the parameter if the command
requires such a parameter. Only command 23 (SetPCRBanks) needs one.
The PPI request file will show output like this then:
# echo "23 16" > request
# cat request
23 16
# echo "5" > request
# cat request
5
- Extend all PCR banks in IMA
Instead of static PCR banks array, the array of available PCR banks
is now allocated dynamically. The digests sizes are determined
dynamically using a probe PCR read without relying crypto's static
list of hash algorithms.
This should finally make sealing of measurements in IMA safe and
secure.
- TPM 2.0 selftests
Added a test suite to tools/testing/selftests/tpm2 previously outside
of the kernel tree: https://github.com/jsakkine-intel/tpm2-scripts
* 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (37 commits)
tpm/ppi: Enable submission of optional command parameter for PPI 1.3
tpm/ppi: Possibly show command parameter if TPM PPI 1.3 is used
tpm/ppi: Display up to 101 operations as define for version 1.3
tpm/ppi: rename TPM_PPI_REVISION_ID to TPM_PPI_REVISION_ID_1
tpm/ppi: pass function revision ID to tpm_eval_dsm()
tpm: pass an array of tpm_extend_digest structures to tpm_pcr_extend()
KEYS: trusted: explicitly use tpm_chip structure from tpm_default_chip()
tpm: move tpm_chip definition to include/linux/tpm.h
tpm: retrieve digest size of unknown algorithms with PCR read
tpm: rename and export tpm2_digest and tpm2_algorithms
tpm: dynamically allocate the allocated_banks array
tpm: remove @flags from tpm_transmit()
tpm: take TPM chip power gating out of tpm_transmit()
tpm: introduce tpm_chip_start() and tpm_chip_stop()
tpm: remove TPM_TRANSMIT_UNLOCKED flag
tpm: use tpm_try_get_ops() in tpm-sysfs.c.
tpm: remove @space from tpm_transmit()
tpm: move TPM space code out of tpm_transmit()
tpm: move tpm_validate_commmand() to tpm2-space.c
tpm: clean up tpm_try_transmit() error handling flow
...
Pull livepatching updates from Jiri Kosina:
- support for something we call 'atomic replace', and allows for much
better handling of cumulative patches (which is something very useful
for distros), from Jason Baron with help of Petr Mladek and Joe
Lawrence
- improvement of handling of tasks blocking finalization, from Miroslav
Benes
- update of MAINTAINERS file to reflect move towards group
maintainership
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: (22 commits)
livepatch/selftests: use "$@" to preserve argument list
livepatch: Module coming and going callbacks can proceed with all listed patches
livepatch: Proper error handling in the shadow variables selftest
livepatch: return -ENOMEM on ptr_id() allocation failure
livepatch: Introduce klp_for_each_patch macro
livepatch: core: Return EOPNOTSUPP instead of ENOSYS
selftests/livepatch: add DYNAMIC_DEBUG config dependency
livepatch: samples: non static warnings fix
livepatch: update MAINTAINERS
livepatch: Remove signal sysfs attribute
livepatch: Send a fake signal periodically
selftests/livepatch: introduce tests
livepatch: Remove ordering (stacking) of the livepatches
livepatch: Atomic replace and cumulative patches documentation
livepatch: Remove Nop structures when unused
livepatch: Add atomic replace
livepatch: Use lists to manage patches, objects and functions
livepatch: Simplify API by removing registration step
livepatch: Don't block the removal of patches loaded after a forced transition
livepatch: Consolidate klp_free functions
...
Mount tmpfs with "nr_inodes=3" for easy check.
Link: http://lkml.kernel.org/r/20190219215016.GA20084@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matej Kupljen <matej.kupljen@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As suggested by Andrew Morton in [1] add selftests for the new
sys_pidfd_send_signal() syscall:
/* test_pidfd_send_signal_syscall_support */
Test whether the pidfd_send_signal() syscall is supported and the tests can
be run or need to be skipped.
/* test_pidfd_send_signal_simple_success */
Test whether sending a signal via a pidfd works.
/* test_pidfd_send_signal_exited_fail */
Verify that sending a signal to an already exited process fails with ESRCH.
/* test_pidfd_send_signal_recycled_pid_fail */
Verify that a recycled pid cannot be signaled via a pidfd referring to an
already exited process that had the same pid (cf. [2], [3]).
[1]: https://lore.kernel.org/lkml/20181228152012.dbf0508c2508138efc5f2bbe@linux-foundation.org/
[2]: https://lore.kernel.org/lkml/20181230210245.GA30252@mail.hallyn.com/
[3]: https://lore.kernel.org/lkml/20181230232711.7aayb7vnhogbv4co@brauner.io/
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Jann Horn <jannh@google.com>
Cc: Andy Lutomirsky <luto@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Christian Brauner <christian@brauner.io>
Reviewed-by: Tycho Andersen <tycho@tycho.ws>
Acked-by: Serge Hallyn <serge@hallyn.com>
Added the tests that I've been using for testing TPM 2.0 functionality
for a long time but have been out-of-tree so far, residing in
https://github.com/jsakkine-intel/tpm2-scripts
Cc: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Acked-by: Joey Pabalinas <joeypabalinas@gmail.com>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
This adds the promised selftest for binderfs. It will verify the following
things:
- binderfs mounting works
- binder device allocation works
- performing a binder ioctl() request through a binderfs device works
- binder device removal works
- binder-control removal fails
- binderfs unmounting works
The tests are performed both privileged and unprivileged. The latter
verifies that binderfs behaves correctly in user namespaces.
Cc: Todd Kjos <tkjos@google.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a few livepatch modules and simple target modules that the included
regression suite can run tests against:
- basic livepatching (multiple patches, atomic replace)
- pre/post (un)patch callbacks
- shadow variable API
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Tested-by: Miroslav Benes <mbenes@suse.cz>
Tested-by: Alice Ferrazzi <alice.ferrazzi@gmail.com>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull integrity updates from James Morris:
"In Linux 4.19, a new LSM hook named security_kernel_load_data was
upstreamed, allowing LSMs and IMA to prevent the kexec_load syscall.
Different signature verification methods exist for verifying the
kexec'ed kernel image. This adds additional support in IMA to prevent
loading unsigned kernel images via the kexec_load syscall,
independently of the IMA policy rules, based on the runtime "secure
boot" flag. An initial IMA kselftest is included.
In addition, this pull request defines a new, separate keyring named
".platform" for storing the preboot/firmware keys needed for verifying
the kexec'ed kernel image's signature and includes the associated IMA
kexec usage of the ".platform" keyring.
(David Howell's and Josh Boyer's patches for reading the
preboot/firmware keys, which were previously posted for a different
use case scenario, are included here)"
* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
integrity: Remove references to module keyring
ima: Use inode_is_open_for_write
ima: Support platform keyring for kernel appraisal
efi: Allow the "db" UEFI variable to be suppressed
efi: Import certificates from UEFI Secure Boot
efi: Add an EFI signature blob parser
efi: Add EFI signature data types
integrity: Load certs to the platform keyring
integrity: Define a trusted platform keyring
selftests/ima: kexec_load syscall test
ima: don't measure/appraise files on efivarfs
x86/ima: retry detecting secure boot mode
docs: Extend trusted keys documentation for TPM 2.0
x86/ima: define arch_get_ima_policy() for x86
ima: add support for arch specific policies
ima: refactor ima_init_policy()
ima: prevent kexec_load syscall based on runtime secureboot flag
x86/ima: define arch_ima_get_secureboot
integrity: support new struct public_key_signature encoding field
This Kselftest update for Linux 4.21-rc1 consists of:
- fixes, and improvements to the framework, and individual tests.
- a new media test for IR encoders from Sean Young.
- a new watchdog test option to find time left on a timer.
-----BEGIN PGP SIGNATURE-----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=H+yF
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest updates from Shuah Khan:
- fixes and improvements to the framework, and individual tests
- a new media test for IR encoders from Sean Young
- a new watchdog test option to find time left on a timer
* tag 'linux-kselftest-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: Fix test errors related to lib.mk khdr target
fix dma-buf/udmabuf selftest
selftests: watchdog: fix spelling mistake "experies" -> "expires"
selftests: watchdog: Add gettimeleft command line arg
selftests: do not macro-expand failed assertion expressions
selftests/ftrace: Fix invalid SPDX identifiers
selftests: gpio: Find libmount with pkg-config if available
selftests: firmware: add CONFIG_FW_LOADER_USER_HELPER_FALLBACK to config
selftests: firmware: remove use of non-standard diff -Z option
media: rc: self test for IR encoders and decoders
Run the transmit timestamp tests as part of kselftests.
Add a txtimestamp.sh test script that runs most variants:
ipv4/ipv6, tcp/udp/raw/raw_ipproto/pf_packet, data/nodata,
setsockopt/cmsg. The script runs tests with netem delays.
Refine txtimestamp.c to validate results. Take expected
netem delays as input and compare against real timestamps.
To run without dependencies, add a listener socket to be
able to connect in the case of TCP.
Add the timestamping directory to the kselftests Makefile.
Build all the binaries. Only run verified txtimestamp.sh.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
From Mimi:
In Linux 4.19, a new LSM hook named security_kernel_load_data was
upstreamed, allowing LSMs and IMA to prevent the kexec_load
syscall. Different signature verification methods exist for verifying
the kexec'ed kernel image. This pull request adds additional support
in IMA to prevent loading unsigned kernel images via the kexec_load
syscall, independently of the IMA policy rules, based on the runtime
"secure boot" flag. An initial IMA kselftest is included.
In addition, this pull request defines a new, separate keyring named
".platform" for storing the preboot/firmware keys needed for verifying
the kexec'ed kernel image's signature and includes the associated IMA
kexec usage of the ".platform" keyring.
(David Howell's and Josh Boyer's patches for reading the
preboot/firmware keys, which were previously posted for a different
use case scenario, are included here.)
This patch fixes the udmabuf selftest. Currently the selftest is broken.
I fixed the selftest by setting the F_SEAL_SHRINK seal on the memfd
file descriptor which is required by udmabuf and added the test to
the selftest Makefile.
Signed-off-by: Tom Murphy <murphyt7@tcd.ie>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Shuah Khan <shuah@kernel.org>
The kernel CONFIG_KEXEC_VERIFY_SIG option is limited to verifying a
kernel image's signature, when loaded via the kexec_file_load syscall.
There is no method for verifying a kernel image's signature loaded
via the kexec_load syscall.
This test verifies loading the kernel image via the kexec_load syscall
fails when the kernel CONFIG_KEXEC_VERIFY_SIG option is enabled on
systems with secureboot enabled[1].
[1] Detecting secureboot enabled is architecture specific.
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Start flood ping for each cpu while loading/flushing rulesets to make
sure we do not access already-free'd rules from nf_tables evaluation loop.
Also add this to TARGETS so 'make run_tests' in selftest dir runs it
automatically.
This would have caught the bug fixed in previous change
("netfilter: nf_tables: do not skip inactive chains during generation update")
sooner.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
ir-loopback can transmit IR on one rc device and check the correct
scancode and protocol is decoded on a different rc device. This can be
used to check IR transmission between two rc devices. Using rc-loopback,
we use it to check the IR encoders and decoders themselves.
No hardware is required for this test.
Signed-off-by: Sean Young <sean@mess.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
Pull restartable sequence support from Thomas Gleixner:
"The restartable sequences syscall (finally):
After a lot of back and forth discussion and massive delays caused by
the speculative distraction of maintainers, the core set of
restartable sequences has finally reached a consensus.
It comes with the basic non disputed core implementation along with
support for arm, powerpc and x86 and a full set of selftests
It was exposed to linux-next earlier this week, so it does not fully
comply with the merge window requirements, but there is really no
point to drag it out for yet another cycle"
* 'core-rseq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq/selftests: Provide Makefile, scripts, gitignore
rseq/selftests: Provide parametrized tests
rseq/selftests: Provide basic percpu ops test
rseq/selftests: Provide basic test
rseq/selftests: Provide rseq library
selftests/lib.mk: Introduce OVERRIDE_TARGETS
powerpc: Wire up restartable sequences system call
powerpc: Add syscall detection for restartable sequences
powerpc: Add support for restartable sequences
x86: Wire up restartable sequence system call
x86: Add support for restartable sequences
arm: Wire up restartable sequences system call
arm: Add syscall detection for restartable sequences
arm: Add restartable sequences support
rseq: Introduce restartable sequences system call
uapi/headers: Provide types_32_64.h
Pull sparc updates from David Miller:
- a FPE signal fix that was also merged upstream
- privileged ADI driver from Tom Hromatka
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc: fix compat siginfo ABI regression
selftests: sparc64: char: Selftest for privileged ADI driver
char: sparc64: Add privileged ADI driver
Cgroups are used for controlling the physical resource distribution
(memory, CPU, io, etc) and often are used as basic building blocks
for large distributed computing systems. Even small differences
in the actual behavior may lead to significant incidents.
The codebase is under the active development, which will unlikely
stop at any time soon. Also it's scattered over different kernel
subsystems, which makes regressions more probable.
Given that, the lack of any tests is crying.
This patch implements some basic tests for the memory controller,
as well as a minimal required framework. It doesn't pretend for a
very good coverage, but pretends to be a starting point.
Hopefully, any following significant changes will include corresponding
tests.
Tests for CPU and io controllers, as well as cgroup core
are next in the todo list.
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: kernel-team@fb.com
Cc: linux-kselftest@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
EMIT_TESTS which is the common function that implements run_tests target,
treats all non-zero return codes from tests as failures. When tests are
skipped with non-zero return code, because of unmet dependencies and/or
unsupported configuration, it reports them as failed. This will lead to
too many false negatives even on the tests that couldn't be run.
EMIT_TESTS is changed to test for SKIP=4 return from tests to enable
the framework for individual tests to return special SKIP code.
Tests will be changed as needed to report SKIP instead FAIL/PASS when
they get skipped.
Currently just the test name is printed in the RUN_TESTS output. For
example, when raw_skew sub-test from timers tests in run, the output
shows just raw_skew. Include main test name when printing sub-test
results.
In addition, remove duplicate strings for printing common information with
a new for the test header information.
With this change run_kelftest.sh output for breakpoints test will be:
TAP version 13
Running tests in breakpoints
========================================
selftests: breakpoints: step_after_suspend_test
not ok 1..1 selftests: breakpoints: step_after_suspend_test [SKIP]
selftests: breakpoints: breakpoint_test
ok 1..2 selftests: breakpoints: breakpoint_test [PASS]
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Move the RTC tests out of the timers folder as they are mostly unrelated.
Keep rtcpie in timers as it only test hrtimers.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
This patch starts testing /proc. Many more tests to come (I promise).
Read from /proc/self/wchan should always return "0" as current is in
TASK_RUNNING state while reading /proc/self/wchan.
Link: http://lkml.kernel.org/r/20180226212006.GA742@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- VHE optimizations
- EL2 address space randomization
- speculative execution mitigations ("variant 3a", aka execution past invalid
privilege register access)
- bugfixes and cleanups
PPC:
- improvements for the radix page fault handler for HV KVM on POWER9
s390:
- more kvm stat counters
- virtio gpu plumbing
- documentation
- facilities improvements
x86:
- support for VMware magic I/O port and pseudo-PMCs
- AMD pause loop exiting
- support for AMD core performance extensions
- support for synchronous register access
- expose nVMX capabilities to userspace
- support for Hyper-V signaling via eventfd
- use Enlightened VMCS when running on Hyper-V
- allow userspace to disable MWAIT/HLT/PAUSE vmexits
- usual roundup of optimizations and nested virtualization bugfixes
Generic:
- API selftest infrastructure (though the only tests are for x86 as of now)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJay19UAAoJEL/70l94x66DGKYIAIu9PTHAEwaX0et15fPW5y2x
rrtS355lSAmMrPJ1nePRQ+rProD/1B0Kizj3/9O+B9OTKKRsorRYNa4CSu9neO2k
N3rdE46M1wHAPwuJPcYvh3iBVXtgbMayk1EK5aVoSXaMXEHh+PWZextkl+F+G853
kC27yDy30jj9pStwnEFSBszO9ua/URdKNKBATNx8WUP6d9U/dlfm5xv3Dc3WtKt2
UMGmog2wh0i7ecXo7hRkMK4R7OYP3ZxAexq5aa9BOPuFp+ZdzC/MVpN+jsjq2J/M
Zq6RNyA2HFyQeP0E9QgFsYS2BNOPeLZnT5Jg1z4jyiD32lAZ/iC51zwm4oNKcDM=
=bPlD
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- VHE optimizations
- EL2 address space randomization
- speculative execution mitigations ("variant 3a", aka execution past
invalid privilege register access)
- bugfixes and cleanups
PPC:
- improvements for the radix page fault handler for HV KVM on POWER9
s390:
- more kvm stat counters
- virtio gpu plumbing
- documentation
- facilities improvements
x86:
- support for VMware magic I/O port and pseudo-PMCs
- AMD pause loop exiting
- support for AMD core performance extensions
- support for synchronous register access
- expose nVMX capabilities to userspace
- support for Hyper-V signaling via eventfd
- use Enlightened VMCS when running on Hyper-V
- allow userspace to disable MWAIT/HLT/PAUSE vmexits
- usual roundup of optimizations and nested virtualization bugfixes
Generic:
- API selftest infrastructure (though the only tests are for x86 as
of now)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (174 commits)
kvm: x86: fix a prototype warning
kvm: selftests: add sync_regs_test
kvm: selftests: add API testing infrastructure
kvm: x86: fix a compile warning
KVM: X86: Add Force Emulation Prefix for "emulate the next instruction"
KVM: X86: Introduce handle_ud()
KVM: vmx: unify adjacent #ifdefs
x86: kvm: hide the unused 'cpu' variable
KVM: VMX: remove bogus WARN_ON in handle_ept_misconfig
Revert "KVM: X86: Fix SMRAM accessing even if VM is shutdown"
kvm: Add emulation for movups/movupd
KVM: VMX: raise internal error for exception during invalid protected mode state
KVM: nVMX: Optimization: Dont set KVM_REQ_EVENT when VMExit with nested_run_pending
KVM: nVMX: Require immediate-exit when event reinjected to L2 and L1 event pending
KVM: x86: Fix misleading comments on handling pending exceptions
KVM: x86: Rename interrupt.pending to interrupt.injected
KVM: VMX: No need to clear pending NMI/interrupt on inject realmode interrupt
x86/kvm: use Enlightened VMCS when running on Hyper-V
x86/hyper-v: detect nested features
x86/hyper-v: define struct hv_enlightened_vmcs and clean field bits
...
This Kselftest update for 4.17-rc1 consists of:
- Test build error fixes.
- Fixes to prevent intel_pstate from building on non-x86 systems.
- New test for ion with vgem driver.
- Change to print the test name to /dev/kmsg to add context to kernel
failures if any uncovered from running the test.
- Kselftest framework enhancements to add KSFT_TAP_LEVEL environment
variable to prevent nested TAP headers being printed in the Kselftest
output. Nested TAP13 headers could cause problems for some parsers.
This change suppresses the nested headers from test programs and test
shell scripts with changes to framework and Makefiles without changing
the tests.
-----BEGIN PGP SIGNATURE-----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=csvV
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest update from Shuah Khan:
"This Kselftest update for 4.17-rc1 consists of:
- Test build error fixes
- Fixes to prevent intel_pstate from building on non-x86 systems.
- New test for ion with vgem driver.
- Change to print the test name to /dev/kmsg to add context to kernel
failures if any uncovered from running the test.
- Kselftest framework enhancements to add KSFT_TAP_LEVEL environment
variable to prevent nested TAP headers being printed in the
Kselftest output.
Nested TAP13 headers could cause problems for some parsers. This
change suppresses the nested headers from test programs and test
shell scripts with changes to framework and Makefiles without
changing the tests"
* tag 'linux-kselftest-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/intel_pstate: Fix build rule for x86
selftests: Print the test we're running to /dev/kmsg
selftests/seccomp: Allow get_metadata to XFAIL
selftests/android/ion: Makefile: fix build error
selftests: futex Makefile add top level TAP header echo to RUN_TESTS
selftests: Makefile set KSFT_TAP_LEVEL to prevent nested TAP headers
selftests: lib.mk set KSFT_TAP_LEVEL to prevent nested TAP headers
selftests: kselftest framework: add handling for TAP header level
selftests: ion: Add simple test with the vgem driver
selftests: ion: Remove some prints
Testsuite contributed by Google and cleaned up by myself for
inclusion in Linux.
Signed-off-by: Ken Hofsass <hofsass@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some tests cause the kernel to print things to the kernel log
buffer (ie. printk), in particular oops and warnings etc. However when
running all the tests in succession it's not always obvious which
test(s) caused the kernel to print something.
We can narrow it down by printing which test directory we're running
in to /dev/kmsg, if it's writable.
Example output:
[ 170.149149] kselftest: Running tests in powerpc
[ 305.300132] kworker/dying (71) used greatest stack depth: 7776 bytes
left
[ 808.915456] kselftest: Running tests in pstore
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This adds tests to check:
- bind-mounts from /dev/pts/ptmx to /dev/ptmx work
- non-standard mounts of devpts work
- bind-mounts of /dev/pts/ptmx to locations that do not resolve to a valid
slave pty path under the originating devpts mount fail
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Export KSFT_TAP_LEVEL and add TAP Header echo to the run_kselftest.sh
script from emit_tests target handling.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Commit fbcab13d2e ("selftests: silence test output by default")
changed the run_tests logic as well as the logic to generate
run_kselftests.sh to redirect test output away from the console.
As discussed on the list and at kernel summit, this is not a desirable
default as it means in order to debug a failure the console output is
not sufficient, you also need access to the test machine to get the
full test logs. Additionally it's impolite to write directly to
/tmp/$TEST_NAME on shared systems.
The change to the run_tests logic was reverted in commit
a323335e62 ("selftests: lib.mk: print individual test results to
console by default"), and instead a summary option was added so that
quiet output could be requested.
However the change to run_kselftests.sh was left as-is.
This commit applies the same logic to the run_kselftests.sh code, ie.
the script now takes a "--summary" option which suppresses the output,
but shows all output by default.
Additionally instead of writing to /tmp/$TEST_NAME the output is
redirected to the directory where the generated test script is
located.
Fixes: fbcab13d2e ("selftests: silence test output by default")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This is a test utility to verify ION buffer sharing in user space
between 2 independent processes.
It uses unix domain socket (with SCM_RIGHTS) as IPC to transfer an FD to
another process to share the same buffer.
This utility demonstrates how ION buffer sharing can be implemented between
two user space processes, using various heap types.
This utility is made to be run as part of kselftest framework in kernel.
The utility is verified on Ubuntu-32 bit system with Linux Kernel 4.14,
using ION system heap.
For more information about the utility please check the README file.
Signed-off-by: Pintu Agarwal <pintu.ping@gmail.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix for loops in targets to run silently to avoid cluttering the test
results.
Suppresses the following from targets: e.g run from breakpoints
for TARGET in breakpoints; do \
BUILD_TARGET=$BUILD/$TARGET; \
mkdir $BUILD_TARGET -p; \
make OUTPUT=$BUILD_TARGET -C $TARGET;\
done;
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
kselftest target fails when object directory is specified to relocate
objects. Inherited "LDFLAGS = -m" fails the test builds. Clear it.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
`selftests/Makefile` is defining only `install` as entire PHONY target
though there are few more PHONY targets including `run_tests`. This
commit defines them as the PHONY targets.
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Cristian Marussi