Commit Graph

277 Commits

Author SHA1 Message Date
Tim Tianyang Chen 92db453e7e Ktest: Add SigInt handling
User can cancel tests and specify handler's behavior using option
'EMAIL_WHEN_CANCELED'.

Link: http://lkml.kernel.org/r/1522094884-22718-3-git-send-email-tianyang.chen@oracle.com

Suggested-by: Dhaval Giani <dhaval.giani@oracle.com>
Signed-off-by: Tim Tianyang Chen <tianyang.chen@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-04-06 14:26:29 -04:00
Tim Tianyang Chen 2ceb2d85b6 Ktest: Add email support
Users can define optional variables to get email notifications.
Ktest can send emails when the script:
 * was started
 * failed with fatal errors and called dodie()
 * completed all testing

Users have to setup the mailer provided in config prior to using this script.
Supported mailers: mailx, mail, sendmail
mailer specific routines are _sendmail_send(), _mailx_send()

Link: http://lkml.kernel.org/r/1522094884-22718-2-git-send-email-tianyang.chen@oracle.com

Suggested-by: Dhaval Giani <dhaval.giani@oracle.com>
Signed-off-by: Tim Tianyang Chen <tianyang.chen@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-04-06 14:24:49 -04:00
Steven Rostedt (VMware) 5a57299a1f ktest.pl: Detect if a config-bisect was interrupted
If a config-bisect was interrupted, then allow the user to continue, or
restart a new config-bisect.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-04-06 14:08:22 -04:00
Steven Rostedt (VMware) 40667fb5fd ktest.pl: Make finding config-bisect.pl dynamic
Just looking for config-bisect.pl in the source tree can be risky,
especially, if the source tree being tested doesn't have config-bisect.pl in
place. Instead, allow the user to set where to find config-bisect.pl with a
new option CONFIG_BISECT_EXEC.

If this option is not set, by default, ktest.pl will look for
config-bisect.pl in the following locations:

 `pwd`/config-bisect.pl # where ktest.pl was called from
 `dirname /path/to/ktest.pl`/config-bisect.pl # where ktest.pl exists
 ${BUILD_DIR}/tools/testing/ktest/config-bisect.pl
   # where config-bisect.pl exists in the source tree.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-04-06 14:08:11 -04:00
Steven Rostedt (VMware) 133087f062 ktest.pl: Have ktest.pl pass -r to config-bisect.pl to reset bisect
If config-bisect.pl sees that a config_bisect has already been started, it
will ask on the command line if it should bisect or not. This will mess up
running config_bisect from ktest.pl.

Have ktest.pl pass in '-r' to config-bisect.pl and have config-bisect.pl
recognize that to reset without asking.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-04-06 14:08:03 -04:00
Steven Rostedt (VMware) b2b07ea282 ktest.pl: Use diffconfig if available for failed config bisects
Check to see if diffconfig is available and use that to diff the configs
instead of using 'diff -u', as diffconfig produces much better output of
kernel config files. It checks the source directory for the executable.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-04-06 14:05:39 -04:00
Steven Rostedt (VMware) b337f9790a ktest.pl: Allow for the config-bisect.pl output to display to console
When commands are run in ktest, they are only displayed in the ktest log
file, but that is not sufficient for outputting the display for config
bisects. The result of a config bisect is not shown.

Add a way to display the output of "run_command" which is the subroutine
used by ktest to execute commands. Use this feature to display the output of
config-bisect.pl executions to see the progress as well as the result.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-04-06 14:05:24 -04:00
Scott Wood a9adc261e9 ktest: Use config-bisect.pl in ktest.pl
Reduce code duplication and take advantage of bisection logic
improvements by calling config-bisect.pl.

The output of make oldconfig is now copied directly to the desired file,
rather than doing assign_configs+save_config, in order to preserve the
ordering so that diffing the configs at the end will provide useful
output.

Link: http://lkml.kernel.org/r/20170717001630.10518-8-swood@redhat.com

Signed-off-by: Scott Wood <swood@redhat.com>
[ Modified to use with new version of config-bisect.pl ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-04-06 14:05:13 -04:00
Steven Rostedt (Red Hat) 0f0db06599 ktest: Add standalone config-bisect.pl program
Started working on a stand alone program that can do a config bisect. It is
based on the config bisect code of ktest.pl. Instead of needing all the
infrastructure of ktest.pl, all that is required for config-bisect.pl is two
config files. One that works, and one that does not. The goal is to pass in
the two files, and it will create a new "good" and a new "bad" config file
based on input from the user. After several iterations (calls to this
program), it will eventually end with a minimum config value that allows one
config to work and the other config to break.

The program uses a technique that takes the good config and then makes half
of the configs that differ from the bad config just like the bad config.
The code will use make oldconfig to make sure the configs that are set are
not all converted back due to incorrect dependencies on other configs set in
the bad config but not in the new test config.

This is still a work in progress, but as it was written while I was working
at Red Hat, I want this code to be submitted as such.

Signed-off-by: Steven Rostedt (Red Hat) <rostedt@goodmis.org>
2018-04-06 14:04:57 -04:00
Arnd Bergmann 4aaacfc669 ktest: remove obsolete architectures
A number of architectures are being removed from the kernel, so
we no longer need to test them.

Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-26 15:56:13 +02:00
Scott Wood 649c0f12de ktest: Set do_not_reboot=y for CONFIG_BISECT_TYPE=build
Currently setting do_not_reboot is triggered by simple builds and bisect
builds, but not config bisect builds.

Link: http://lkml.kernel.org/r/20170717001630.10518-3-swood@redhat.com

Signed-off-by: Scott Wood <swood@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-03-21 12:19:01 -04:00
Scott Wood 25bc70fa09 ktest: Set buildonly=1 for CONFIG_BISECT_TYPE=build
Rather than adding a third copy of the same logic, rework it to cover
all three buildonly cases at once.

In the future, please consider using the same variable to perform the
same function regardless of context...

Link: http://lkml.kernel.org/r/20170717001630.10518-2-swood@redhat.com

Signed-off-by: Scott Wood <swood@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-03-21 12:18:18 -04:00
Steven Rostedt (VMware) 6dd3791dcf ktest: Comment about other names than just ktest.conf
ktest.pl will read any file as long as its name is specified as the first
argument on the command line. Comment this fact in sample.conf.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-03-21 12:08:02 -04:00
Scott Wood edbd0ede00 ktest: Clarify config file usage
Simply telling a new user to edit "the config file" without giving any
hints on where that file should go, what it should be named, or where
a template can be found, is not particularly helpful.

Link: http://lkml.kernel.org/r/20170717001630.10518-1-swood@redhat.com

Signed-off-by: Scott Wood <swood@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-03-21 12:06:25 -04:00
Steven Rostedt (VMware) 3e1d367884 ktest: Add CONNECT_TIMEOUT to change the connection timeout time
Before ktest issues a reboot, it will try to connect to the target machine
to make sure that it is still alive. If the target does not respond within 5
seconds, it will power cycle the box instead of issuing a reboot.

Five seconds may be too short, and ktest may unnecessarially power cycle the
box. I have found 25 seconds seems to be a better timeout for this purpose.
But even 25 may be too arbitrary. Add a CONNECT_TIMEOUT option to let the
user determine the timeout time before rebooting. By default, it has been
raised to 25 seconds.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-03-21 10:36:08 -04:00
Steven Rostedt (VMware) 9f23b129eb ktest: Wait for console process to exit
To clean up the console processes that are forked to monitor the console,
there needs to be a waitpid().

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-03-21 10:24:20 -04:00
Arnd Bergmann bb9d812643 arch: remove tile port
The Tile architecture port was added by Chris Metcalf in 2010, and
maintained until early 2018 when he orphaned it due to his departure
from Mellanox, and nobody else stepped up to maintain it. The product
line is still around in the form of the BlueField SoC, but no longer
uses the Tile architecture.

There are also still products for sale with Tile-GX SoCs, notably the
Mikrotik CCR router family. The products all use old (linux-3.3) kernels
with lots of patches and won't be upgraded by their manufacturers. There
have been efforts to port both OpenWRT and Debian to these, but both
projects have stalled and are very unlikely to be continued in the future.

Given that we are reasonably sure that nobody is still using the port
with an upstream kernel any more, it seems better to remove it now while
the port is in a good shape than to let it bitrot for a few years first.

Cc: Chris Metcalf <chris.d.metcalf@gmail.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: http://www.mellanox.com/page/npu_multicore_overview
Link: https://jenkins.debian.net/view/rebootstrap/job/rebootstrap_tilegx_gcc7/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-16 10:56:03 +01:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Linus Torvalds 8557b8e43a Greg Kroah-Hartman reported to me that the ktest of v4.10 locked up in an
infinite loop while doing the make mrproper. Looking into the cause I noticed
 that a recent update to the function run_command (used for running all
 shell commands, including "make mrproper") changed the internal loop to
 use the function wait_for_input. The wait_for_input uses select to look
 at two file descriptors. One is the file descriptor of the command it is
 running, the other is STDIN. The STDIN check was not checking the return
 status of the sysread call, and was also just writing a lot of data into
 syswrite without regard to the size of the data read.
 
 Changing the code to check the return status of sysread, and also to still
 process the passed in descriptor data without looping back to the select
 fixed Greg's problem.
 
 While looking at this code I also realized that the loop did not honor
 the timeout if STDIN always had input (or for some reason return error).
 this could prevent wait_for_input to timeout on the file descriptor it
 is suppose to be waiting for. That is fixed too.
 -----BEGIN PGP SIGNATURE-----
 
 iQExBAABCAAbBQJYwChiFBxyb3N0ZWR0QGdvb2RtaXMub3JnAAoJEMm5BfJq2Y3L
 0vwH/0gxaT134N6lkZ5Bdv2RJNVUu8mvAbjnXNPpUz1XSBd4zUVpfKONhxc7O50V
 mNb9WfmJ4nhcjp4qeEIhdpJvO2Fjm1grIVWcvnT6FwNfvGG9S73OYyRdK0ggcYhE
 gFRsdXBipVNL0pNlJhl1//XHq644IMhqDGRBQmR+eKUym2iiJHYhgteeGOQ3PHg1
 L5MW1zORbPzeuVPDKGBVA4LDqlu3/gwJSIGZyYivAJp7f5Q5+t+1FPfUMdhodvps
 XiNsgHkHSpjhcCKxbjgSFrIX52AyrciYt+ZlIDps97R+IRk671BFHoOEcSZDux9O
 Cm3L3eBA8zIJQn9yXjlVvHfbVxU=
 =sGdD
 -----END PGP SIGNATURE-----

Merge tag 'ktest-v4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest

Pull ktest fixes from Steven Rostedt:
 "Greg Kroah-Hartman reported to me that the ktest of v4.11-rc1 locked
  up in an infinite loop while doing the make mrproper.

  Looking into the cause I noticed that a recent update to the function
  run_command (used for running all shell commands, including "make
  mrproper") changed the internal loop to use the function
  wait_for_input.

  The wait_for_input function uses select to look at two file
  descriptors. One is the file descriptor of the command it is running,
  the other is STDIN. The STDIN check was not checking the return status
  of the sysread call, and was also just writing a lot of data into
  syswrite without regard to the size of the data read.

  Changing the code to check the return status of sysread, and also to
  still process the passed in descriptor data without looping back to
  the select fixed Greg's problem.

  While looking at this code I also realized that the loop did not honor
  the timeout if STDIN always had input (or for some reason return
  error). this could prevent wait_for_input to timeout on the file
  descriptor it is suppose to be waiting for. That is fixed too"

* tag 'ktest-v4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Make sure wait_for_input does honor the timeout
  ktest: Fix while loop in wait_for_input
2017-03-08 11:06:05 -08:00
Steven Rostedt (VMware) f7c6401ff8 ktest: Make sure wait_for_input does honor the timeout
The function wait_for_input takes in a timeout, and even has a default
timeout. But if for some reason the STDIN descriptor keeps sending in data,
the function will never time out. The timout is to wait for the data from
the passed in file descriptor, not for STDIN. Adding a test in the case
where there's no data from the passed in file descriptor that checks to see
if the timeout passed, will ensure that it will timeout properly even if
there's input in STDIN.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-03-08 10:41:37 -05:00
Steven Rostedt (VMware) 99c014a879 ktest: Fix while loop in wait_for_input
The run_command function was changed to use the wait_for_input function to
allow having a timeout if the command to run takes too much time. There was
a bug in the wait_for_input where it could end up going into an infinite
loop. There's two issues here. One is that the return value of the sysread
wasn't used for the write (to write a proper size), and that it should
continue processing the passed in file descriptor too even if there was
input. There was no check for error, if for some reason STDIN returned an
error, the function would go into an infinite loop and never exit.

Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 6e98d1b441 ("ktest: Add timeout to ssh command")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-03-08 10:16:17 -05:00
Linus Torvalds 1ac884f173 These are various fixes that I have made and never got around to pushing.
I've been asked to get the upstream repo back up-to-date.
 -----BEGIN PGP SIGNATURE-----
 
 iQExBAABCAAbBQJYtD0iFBxyb3N0ZWR0QGdvb2RtaXMub3JnAAoJEMm5BfJq2Y3L
 7E0H/0Sg5YxCH3iaKyZ0Z6vj9k09wBcXpzBLtUKrCiK46XEhvXCkh7vFJSY5AmGO
 TcIsSBwmCdHWT5M5jM2n0j2GdxJOE0jXHlbnMvXob5EjW6QAw+mRI+KK0KGzmQIq
 M4cYxrmD+HDwgulaFkF3P/nQ64wU35zaUQxFAmh0SY2xNUTg/BL8BMebfH9BauFB
 SWBWF156kon0+eXvqLDfgfRyWiDH4IB65CEu9N+1ubJPWKrHoqHTopMW+jsqbVeu
 qEEiigfmRlPiCOEiD4LQn+4qdmTji4dR/ZRvOCEGBGXtJPtqvI275m3/UxDvp9jx
 07hZ+1701J+aPaYx0hS5iPegFq4=
 =P7wC
 -----END PGP SIGNATURE-----

Merge tag 'ktest-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest

Pull ktest updates from Steven Rostedt:
 "These are various fixes that I have made and never got around to
  pushing. I've been asked to get the upstream repo back up-to-date"

* tag 'ktest-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Add variable run_command_status to save status of commands executed
  ktest.pl: Powercycle the box on reboot if no connection can be made
  ktest: Add timeout to ssh command
  ktest: Fix child exit code processing
  ktest: Have POST_TEST run after the test has totally completed
2017-02-27 23:07:59 -08:00
Steven Rostedt (VMware) 5739438b72 ktest: Add variable run_command_status to save status of commands executed
Create a variable called run_command_status that saves the status of the
executed commands and can be used by other functions later to test for
status.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-02-07 14:50:03 -05:00
Steven Rostedt (VMware) 6474ace999 ktest.pl: Powercycle the box on reboot if no connection can be made
When performing a reboot of the test box, try to ssh to it. If it can't
connect for 5 seconds, then powercycle the box. This is useful because the
reboot is done via ssh, and if you can't ssh to the box because it is hung,
the reboot fails to reboot.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-02-07 12:23:38 -05:00
Steven Rostedt (VMware) 6e98d1b441 ktest: Add timeout to ssh command
Add a timeout to performing an ssh command. This will let testing if a
machine is alive or not, or if something else may be amiss. A timeout can be
passed to ssh, where ssh will fail if it does not complete within the given
timeout.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-02-07 12:23:38 -05:00
Steven Rostedt (VMware) 32677207dc ktest: Fix child exit code processing
The child_exit errno needs to be shifted by 8 bits to compare against the
return values for the bisect variables.

Fixes: c5dacb88f0 ("ktest: Allow overriding bisect test results")
Cc: stable@vger.kernel.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-02-07 12:05:25 -05:00
Steven Rostedt (VMware) 2e07c9f55e ktest: Have POST_TEST run after the test has totally completed
The POST_TEST config is to be executed after a test has fully compeleted,
whether the test passed or failed. It currently is executed at the moment
that the test has been decided if it failed or not. As the test does other
clean ups, it isn't truly finished. Move the POST_TEST execution to after
all the test cleanups have been done.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-02-07 11:49:21 -05:00
Pavel Machek 22722799de ktest.pl: fix english
Ajdust spelling to more common "mandatory".  Variant "mandidory" is
certainly wrong.

Link: http://lkml.kernel.org/r/20161011073003.GA19476@amd
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-14 16:04:08 -08:00
Steven Rostedt (Red Hat) 7c2c49eceb ktest: Place quotes around item variable
Seems that some of the new console logic causes doprint to possibly
get evaluated. When printing a commit message that contains parenthesis,
it fails with a shell parsing error.

This gets fixed when we add quotes around the $item variable, and prevent
it from being evaluated by any shell commands.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-02-03 15:45:13 -05:00
Josh Poimboeuf 1cb9e64298 ktest: Cleanup terminal on dodie() failure
If dodie() is called with the console open, restore the terminal's
original settings before dying.

Link: http://lkml.kernel.org/r/20150130025453.GB20952@treble.redhat.com

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-02-02 10:43:39 -05:00
Steven Rostedt (Red Hat) 4bf6e1fc99 ktest: Print build,install,boot,test times at success and failure
Since both success and failure may shortcut and exit ktest, it is better
to print the status times there too. Once times are printed, the values
for the times are reset, so they will not print more than once.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-02-02 10:43:30 -05:00
Josh Poimboeuf 9d2f7f051b ktest: Enable user input to the console
Allow the user to send input to the console by putting the terminal in
cbreak mode (to allow reading stdin one character at a time) and copying
all stdin data to the console's pty.

Link: http://lkml.kernel.org/r/bb1bbe7d202c95a3ce7894cfffdd8c725875978e.1422473610.git.jpoimboe@redhat.com

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-02-02 10:43:24 -05:00
Josh Poimboeuf 9f2cdcbbb9 ktest: Give console process a dedicated tty
Create a pseudoterminal (pty pair) to give the console a dedicated tty
so it doesn't mess with ktest's terminal settings.

Link: http://lkml.kernel.org/r/37b0127f9efad09ff4fc994334db998141e4f6ca.1422473610.git.jpoimboe@redhat.com

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-02-02 10:43:12 -05:00
Steven Rostedt (Red Hat) 64d982838e ktest: Rename start_monitor_and_boot to start_monitor_and_install
The function start_monitor_and_boot is a misnomer. It use to, but
now it starts the monitor and installs. It does not boot. Rename it
before I get confused by it again.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-01-29 09:02:07 -05:00
Steven Rostedt (Red Hat) 38fa3dc15c ktest: Show times for build, install, boot and test
Seeing the times for how long a build, install, reboot and the
test takes is helpful for analyzing the test process. Seeing
how different changes affect the timings.

Show the build, install, boot and test times when at the end of
the test, or between each interval for tests that do those
mulitple times (like bisect and patchcheck).

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-01-29 09:02:06 -05:00
Josh Poimboeuf 988427829b ktest: Restore tty settings after closing console
When ktest runs the console program as a child process, the parent and
child share the same tty for stdin and stderr.  This is problematic when
using a libvirt target.  The "virsh console" program makes a lot of
changes to the tty settings, making ktest's output hard to read
(carriage returns don't work).  After ktest exits, the terminal is
unusable (CRs broken, stdin isn't echoed).

I think the best way to fix this issue would be to create a
pseudoterminal (pty pair) so the child process would have a dedicated
tty, and then use pipes to connect the two ttys.  I'm not sure if that's
overkill, but it's far beyond my current Perl abilities.

This patch is a much easier way to (partially) fix this issue.  It saves
the tty settings before opening the console and restores them after
closing it.  There are still a few places where ktest prints mangled
output while the console is open, but the output is much more legible
overall, and the terminal works just fine after ktest exits.

Link: http://lkml.kernel.org/r/1bb89abc0025cf1d6da657c7ba58bbeb4381a515.1422382008.git.jpoimboe@redhat.com

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-01-27 17:44:57 -05:00
Steven Rostedt (Red Hat) b53486e083 ktest: Add timings for commands
I find that I usually like to see how long a make or other command takes,
and adding a start and end time and reporting how long each command runs
(in seconds) is helpful.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-01-27 17:44:56 -05:00
Steven Rostedt (Red Hat) 17150fef4a ktest: Add back "tail -1" to kernelrelease make
Commit 52d21580b3 "ktest: Use make -s kernelrelease" fixed commit
7ff525712a "kbuild: fake the "Entering directory ..." message more simply"
as that commit added output after the make kernelrelease. But there's still
some build scripts that are used by ktest that has output before the make
is executed, and requires that only the last line is printed.

Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-23 15:13:44 -05:00
Steven Rostedt (Red Hat) 18656c7099 ktest: Add name to running title
Instead of just showing the test type of test in the start of the
test, like this:

  RUNNING TEST 1 of 26 with option build defconfig

Add the name (if it is defined) as well, like this:

  RUNNING TEST 1 of 26 (arm64 aarch64-linux) with option build defconfig

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-21 19:38:58 -05:00
Steven Rostedt (Red Hat) 22c37a9ac4 ktest: Allow tests to undefine default options
Tests can set options that override the default ones. But if a test
tries to undefine a default option, it is simply ignored and the
default option stays as is.

For example, if you want to have a test that defines no MIN_CONFIG
then the test should be able to do that with:

   TEST_START
   MIN_CONFIG =

Which should make MIN_CONFIG not defined for that test. But the way
the code currently works, undefined options in tests are dropped.
This is because the NULL options are evaluated during the reading of
the config file and since one can disable default options in the default
section with this method, it is evaluated there (the option turns to a
undef). But undef options in the test section mean to use the default
option.

To fix this, keep the empty string in the option during the reading
of the config file, and then evaluate it when running the test. This
will allow tests to null out default options.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-21 19:38:57 -05:00
Steven Rostedt (Red Hat) 9972fc0b85 ktest: Fix make_min_config to handle new assign_configs call
Commit 6071c22e17 "ktest: Rewrite the config-bisect to actually work"
fixed the config-bisect to work nicely but in doing so it broke
make_min_config by changing the way assign_configs works.

The assign_configs function now adds the config to the hash even if
it is disabled, but changes the hash value to be that of the
line "# CONFIG_FOO is not set". Unfortunately, the make_min_config
test only checks to see if the config is removed. It now needs to
check if the config is in the hash and not set to be disabled.

Cc: stable@vger.kernel.org # 3.17+
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-21 19:38:56 -05:00
Michal Marek 52d21580b3 ktest: Use make -s kernelrelease
The previous tail -1 broke with commit 7ff525712a ("kbuild: fake the
"Entering directory ..." message more simply")

Link: http://lkml.kernel.org/r/20141022194408.GA20989@pobox.suse.cz

Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-21 19:37:56 -05:00
Steven Rostedt (Red Hat) d832d74338 ktest: Don't bother with bisect good or bad on replay
If git bisect reply is being used in the bisect tests, don't bother
doing the git bisect good or git bisect bad calls. The git bisect
reply will override them anyway, and that's called immediately
after the other two. Going the git bisect (good|bad) is just a
waste of time.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-10-07 16:34:25 -04:00
Steven Rostedt (Red Hat) 995bc43140 ktest: Fix check for new kernel success on rebooting to good kernel
The reboot function when rebooting back to a good kernel has a check
to make sure that a new kernel was indeed booted. But that check
uses a timeout value, which when calling the monitor will still
return success if the timeout is hit (no bug was found). It should
return an error to let the reboot code know that a new kernel was
not reached. Only the reboot code checks the return value of the
monitor.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-10-07 16:31:07 -04:00
Chris J Arges fee9d3e61d ktest: add ability to skip during BISECT_MANUAL
When doing a manual bisect, a build can fail or a test can be inconclusive.
In these cases it would be helpful to be able to skip the test entirely.

Link: http://lkml.kernel.org/r/1409164021-2136-1-git-send-email-chris.j.arges@canonical.com

Reviewed-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
Signed-off-by: Chris J Arges <chris.j.arges@canonical.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-09-19 20:12:52 -04:00
Steven Rostedt (Red Hat) 23a0e1611b ktest: Add PATCHCHECK_CHERRY
Add a way to run a patchcheck test on the commits that are in one branch
but not in another. This uses git cherry to find a list of commits to
test each one with.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-09-19 20:10:39 -04:00
Steven Rostedt (Red Hat) 4c16b1d6d5 ktest: Update documentation on config_bisect
With the more robust config_bisect, the documentation is out of
date and needs to be updated.

The new rewrite allows for finding missing configs and such, and
is much more robust to use.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-04-23 23:18:29 -04:00
Steven Rostedt (Red Hat) 4cc559bd1d ktest: Add the config bisect manual back
After the rewrite of the config bisect, the bisect manual was
removed. Add it back.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-04-23 23:18:26 -04:00
Steven Rostedt (Red Hat) 4186cb4518 ktest: Remove unused functions
After the rewrite of the config bisect, there were several unused
functions that can be removed.

One of the unused functions printed out the failed config nicer than
what the rewrite did, so I kept that and used it to output the
bad config.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-04-23 23:18:25 -04:00
Steven Rostedt (Red Hat) c4d1d11f3b ktest: Put back in the CONFIG_BISECT_CHECK
The new rewrite left out the CONFIG_BISECT_CHECK, which allows the
user to test that their "bad" config still is bad and their "good"
config still is good. This is especially important as the configs
are passed through a "make oldconfig" to update them with the lastest
kernel. Things could change that causes a bad config to work, or a
good config to break. The check is done after the configs have run
through the oldconfig processing.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-04-23 23:18:20 -04:00
Steven Rostedt (Red Hat) 6071c22e17 ktest: Rewrite the config-bisect to actually work
I never liked the way config-bisect worked. I would assume the bad config
had some config that broke the system. But it would not work if the bad
config just happened to be missing something that the good config had.

I rewrote the config-bisect to do this properly. It does a diff of the two
configs, and sets half of the configs that are in one and not the other.
The way it works is that when it "sets", it really just makes one copy
what the other has. That is, a "set" can be setting a:

  # CONFIG_FOO is not set

Basically, it looks at the differences between the two files and makes
them similar until it comes down to one config that makes it work or
not work depending on if it is set or not.

Note, if more than one config change makes the bad config not work, it
will only find one of them. But this is true with all bisect logic.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-04-23 23:18:15 -04:00
Satoru Takeuchi 5269faad27 ktest: Some cleanup for improving readability
Some cleanup for improving readability as follows.

  - Initialize $ktest_config at its definition.
  - Put parentheses around the `config-file' argument in the usage message
    because it's a optional one.
  - Rename get_ktest_config{,s} to more descriptive get_mandatory_config{,s}.

Link: http://lkml.kernel.org/r/87fvmr30kb.wl%satoru.takeuchi@gmail.com

Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-04-23 23:18:12 -04:00
Satoru Takeuchi f983a2bc9d ktest: add 2nd parameter of run_command() to set the redirect target file
If we'd like to set the redirect target file of run_command(),
we should define $redirect before calling this function and should undef it
after calling this function. Since it's user-unfriendly, add 2nd parameter of
run_command() for this purpose.

Link: http://lkml.kernel.org/r/87vbvwokq8.wl%satoru.takeuchi@gmail.com

Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-04-23 23:18:09 -04:00
Satoru Takeuchi 62183dcac5 ktest: Set CLOSE_CONSOLE_SIGNAL in the kvm.conf
As mentioned at commit 5a5d8e4844, we can't terminate 'virsh console'
with the default signal(INT). So it's better to set CLOSE_CONSOLE_SIGNAL
in the kvm.conf.

Link: http://lkml.kernel.org/r/8738jatylb.wl%satoru.takeuchi@gmail.com

Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
[ Typo fixed by ]
Signed-off-by: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-02-26 15:26:24 -05:00
Linus Torvalds 9451ee2d17 Here's some basic updates to ktest.pl. They include:
o Add config to modify the signal to terminate console
  o Update to documentation (missing some config options)
  o Add KERNEL_VERSION variable to use for other configs
  o Add '=~' to let configs eval other configs
  o Add BISECT_TRIES to run multiple tests per git bisect good
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.15 (GNU/Linux)
 
 iQEcBAABAgAGBQJS3UMjAAoJEKQekfcNnQGuU/YH/RdTp8o6GgHfBans6vG588mZ
 CoTOhfYH9loGTAcs8JqKt0sIBaPDmdF1Qur+nthBJ/vqyFSpRtaoCLTTvNTb8Snh
 Wia5DEpi4BnfH3TMyMqNVCyXJjO8wkxq7bv5wB1+pqVnIDADlX5xejOVCDms2scm
 EUXQeZx38KrFHH2ZvrjzjrGjIboKB/vTriqF8Q/Vmu0lRYo+Lt6HkDUEJEehxeLz
 oU+oQOuep5ABo1APMYIml9YZqBeJJuCeqKd75T3QfgWyyCaYLv1ggHXG/bymBROX
 uTd/RK3lKC/ODkVi9u57a4djptYYUW6mTDkUcLO3lZhqhVKqSiOQt0B9Bw/JTdQ=
 =+mEf
 -----END PGP SIGNATURE-----

Merge tag 'ktest-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest

Pull ktest updates from Steven Rostedt:
 "Here's some basic updates to ktest.pl.  They include:

   - add config to modify the signal to terminate console
   - update to documentation (missing some config options)
   - add KERNEL_VERSION variable to use for other configs
   - add '=~' to let configs eval other configs
   - add BISECT_TRIES to run multiple tests per git bisect good"

* tag 'ktest-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Add BISECT_TRIES to bisect test
  ktest: Add eval '=~' command to modify variables in config file
  ktest: Add special variable ${KERNEL_VERSION}
  ktest: Add documentation of CLOSE_CONSOLE_SIGNAL
  ktest: Make the signal to terminate the console configurable
2014-01-20 09:39:18 -08:00
Steven Rostedt (Red Hat) 961d9cacee ktest: Add BISECT_TRIES to bisect test
For those cases that it takes several tries to hit a bug, it would be
useful for ktest.pl to try a test multiple times before it considers
the test as a pass. To accomplish this, BISECT_TRIES ktest config
option has been added. It is default to one, as most of the time a
bisect only needs to try a test once. But the user can now up this
to make ktest run a given test multiple times. The first failure
that is detected will set a bisect bad. It only repeats on success.

Note, as with all race bugs, there's no guarantee that if it succeeds,
it is really a good bisect. But it helps in case the bug is somewhat
reliable.

You can set BISECT_TRIES to zero, and all tests will be considered
good, unless you also set BISECT_MANUAL.

Suggested-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-01-18 19:52:13 -05:00
Steven Rostedt (Red Hat) c75d22d9c6 ktest: Add eval '=~' command to modify variables in config file
With the added variable ${KERNEL_VERSION}, it is useful to be
able to use parts of it for other variables.

For example, if you want to create a warnings file for each major
kernel version to test sub versions against you can create
your warnings file with like this:

  WARNINGS_FILE = warnings-file-${KERNEL_VERSION}

But this may add 3.8.12 or something, and we want all 3.8.* to
use the same file, and 3.10.* to use another file, and so on.
With the eval command we can, by adding:

  WARNINGS_FILE =~ s/(-file-\d+\.\d+).*/$1/

Which will chop off the extra characters after the 3.8.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-12-11 21:16:59 -05:00
Steven Rostedt (Red Hat) 8e80bf05ff ktest: Add special variable ${KERNEL_VERSION}
Add a special variable that can be used in other variables called
${KERNEL_VERSION}. This will embed the current kernel version into
the variable. For example:

WARNINGS_FILE = ${OUTPUT_DIR}/warnings-${KERNEL_VERSION}

If the current version is v3.8 then the WARNINGS_FILE will become

  ${OUTPUT_DIR}/warnings-v3.8

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-12-11 15:53:31 -05:00
Steven Rostedt (Red Hat) 298a0d1d57 ktest: Add documentation of CLOSE_CONSOLE_SIGNAL
The sample.conf file needs to document all available options.
With the new CLOSE_CONSOE_SIGNAL option, it too needs to be
document.

Cc: Satoru Takeuchi <satoru.takeuchi@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-12-03 12:02:36 -05:00
Satoru Takeuchi 5a5d8e4844 ktest: Make the signal to terminate the console configurable
Currently ktest sends SIGINT to terminate the console.
 However, there are consoles which do not exit by this signal, for example,
 in my case, "virsh console <guest OS>". In such case, ktest is blocked in
 close_console(). It prevents this automate test.

This patch adds new option CLOSE_CONSOLE_SIGNAL which mean the
signal to terminate the console. Since its default value is "INT",
the original behavior isn't changed.

Link: http://lkml.kernel.org/r/87zjol8pl5.wl%satoru.takeuchi@gmail.com

Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-12-03 11:56:07 -05:00
Guenter Roeck 4b08478422 Drop support for Renesas H8/300 (h8300) architecture
H8/300 has been dead for several years, and the kernel for it
has not compiled for ages. Drop support for it.

Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-09-16 18:19:04 -07:00
Masanari Iida 8b513d0cf6 treewide: Fix typo in printk
Correct spelling typo in various part of drivers

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-05-28 12:02:13 +02:00
Steven Rostedt (Red Hat) df5f7c6601 ktest: Reset grub menu cache with different machines
Different tests may use a different machine. In such cases, we need to
try to get the current grub menu index. If the same grub menu is used
for two different machines, it may not be at the same index on the
second machine. A search for the index must be performed again.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-04-24 16:03:30 -04:00
Steven Rostedt (Red Hat) 752d96657c ktest: Allow tests to use different GRUB_MENUs
To save connecting and searching for a given grub menu for each test,
ktest.pl will cache the grub number it found. The problem is that
different tests might use a different grub menu, but ktest.pl will
ignore it.

Instead, have ktest.pl check if the grub menu it used to cache the
content is the same as when it grabbed the menu. If not, grab it again,
otherwise just return the cached value.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-08 09:33:35 -05:00
Steven Rostedt (Red Hat) 7328735cbf ktest: Remove indexes from warnings check
The index of a line where a warning is tested can be returned
differently on different versions of gcc (or same version compiled
differently). That is, a tab + space can give different results. This
causes the warning check to produce a false positive. Removing the
index from the check fixes this issue.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-02-18 09:35:49 -05:00
Steven Rostedt (Red Hat) 4c0b67a27d ktest: Ignore warnings during reboot
The reboot just wants to get to the next kernel. But if a warning (Call
Trace) appears, the monitor will report an error, and the reboot will
think something went wrong and power cycle the box, even though we
successfully made it to the next kernel.

Ignore warnings during the reboot until we get to the next kernel. It
will still timeout if we never get to the next kernel and then a power
cycle will happen. That's what we want it to do.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-02-05 10:02:37 -05:00
Steven Rostedt (Red Hat) d684553623 ktest: Search for linux banner for successful reboot
Sometimes when a test kernel passed fine, but on reboot it crashed,
ktest could get stuck and not proceed. This would be frustrating if you
let a test run overnight to find out the next morning that it was stuck
on the first test.

To fix this, I made reboot check for the REBOOT_SUCCESS_LINE. If the
line was not detected, then it would power cycle the box.

What it didn't cover was if the REBOOT_SUCCESS_LINE wasn't defined or if
a 'good' kernel did not display the line. Instead have it search for the
Linux banner "Linux version". The reboot just needs to get to the start
of the next kernel, it does not need to test if the next kernel makes it
to a boot prompt.

After we find the next kernel has booted, then we just wait for either
the REBOOT_SUCCESS_LINE to appear or the timeout.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-02-05 10:00:20 -05:00
Steven Rostedt (Red Hat) 4283b169ab ktest: Add make_warnings_file and process full warnings
Although the patchcheck test checks for warnings in the files that were
changed, this check does not catch warnings that were caused by header
file changes and the warnings appear in C files not touched by the
commit.

Add a new option called WARNINGS_FILE. If this option is set, then the
file it points to is read before bulid, and the file should contain a
list of known warnings. If a warning appears in the build, this file is
checked, and if the warning does not exist in this file, then it fails
the build showing the new warning.

If the WARNINGS_FILE points to a file that does not exist, this will
cause any warning in the build to fail.

A new test is also added called "make_warnings_file". This test will
create do a build and record any warnings it finds into the
WARNINGS_FILE. This test is something that can be run before other tests
to build a warnings file of "known warnings", ie, warnings that were
there before your changes.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-01-31 10:24:56 -05:00
Steven Rostedt (Red Hat) 04262be3db ktest: Allow a test option to use its default option
Options are allowed to use other options, for example:

  LOG_FILE = ${OUTPUT_DIR}/${MACHINE}.log

where the option LOG_FILE used the options OUTPUT_DIR and MACHINE.

But if a test option were to use a default option, it will not get
substituted:

  OUTPUT_DIR = ${THIS_DIR}/${MACHINE}

  TEST_START
  OUTPUT_DIR = ${OUTPUT_DIR}/t1

For the above test, OUTPUT_DIR will stay literally "${OUTPUT_DIR}/t1"
and not be converted to "${THIS_DIR}/${MACHINE}/t1". When the test runs,
it will pass the ${OUTPUT_DIR} to the shell, which would probaly
interpret it as "", and the output directory will end up as "/t1".

Change the code where if a test option has its own option name in
its defined field, and a default option exists, then substitute the
default option in its place.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-01-31 10:24:53 -05:00
Steven Rostedt (Red Hat) 35275685bf ktest: Strip off '\n' when reading which files were modified
The patchcheck test looks at what files are modified for each patch it
checks and makes sure that those files do not produce any warnings.

Unfortunately, when it read the diffstat, the newlines were added on the
files and this made compares miss warnings, and commits that should not
have passed, ktest let pass.

Fix this by using the perl command "chomp" that strips off whitespace at
the end of lines.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-01-30 12:28:15 -05:00
Steven Rostedt (Red Hat) 319ab14f05 ktest: Do not require CONSOLE for build or install bisects
If the user is doing a build or install bisect, there's no reason to
have them define CONSOLE, as the console does not need to be read. The
console only needs to be read for boot tests.

CONSOLE is not required for normal build or install tests, let's not
require it for bisect tests with BISECT_TYPE of build or install.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-01-30 12:25:38 -05:00
Steven Rostedt e1a6c3d748 ktest: Test if target machine is up before install
Sometimes a test kernel will crash or hang on reboot (this is even more
apparent when testing a config without CGROUPS on a box running
systemd). When this happens, on the next iteration of installing a
kernel, ktest will fail when it tries to install.

Have ktest do a check to see if the target can be connected to via ssh
before it tries to install. If it can't connect, then reboot again.
This time the reboot will fail because it can't connect and will force a
power cycle.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-12-11 21:19:41 -05:00
Steven Rostedt 1892517056 ktest: Fix breakage from change of oldnoconfig to olddefconfig
Commit fb16d891 "kconfig: replace 'oldnoconfig' with 'olddefconfig', and
keep the old name", changed ktest's default config update from
oldnoconfig to olddefconfig without adding oldnoconfig as a backup.
The make oldnoconfig works much better than its backup of:
   yes '' | make oldconfig

But due to this change, and the fact that ktest is used to build lots of
older kernels (and for bisects), it forgoes the oldnoconfig completely.

Cc: Adam Lee <adam8157@gmail.com>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-12-11 20:23:22 -05:00
Steven Rostedt 7786954c95 ktest: Add native support for syslinux boot loader
I installed Fedora 17 which no longer supports grub v1. I worked
with grub2 for a while, but there's so many issues with it and automated
rebooting, that I decided to switch to syslinux. Instead of using
the REBOOT_SCRIPT and add customized changes to get syslinux booted,
I thought it better to make ktest aware of syslinux and add options
to simplify the use of syslinux on a target test box.

Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: John 'Warthog9' Hawley <warthog9@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-12-11 18:18:46 -05:00
Steven Rostedt a496872212 ktest: Sync before reboot
Before rebooting the target, run the sync command, as it seems that
either Grub2 or systemd gets screwed up if you update to reboot a kernel
once and do a reboot without doing a sync.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-12-11 14:59:05 -05:00
Steven Rostedt a15ba91361 ktest: Add support for grub2
As only grub or 'script' is supported for rebooting to a new kernel,
and Fedora 17 has dropped support for grub, I decided to add grub2
support as well (I also plan on adding syslinux/extlinux support too).

The options GRUB_FILE and GRUB_REBOOT were added to allow the user
to specify where to find the grub.cfg and what tool to use to reboot
into the next kernel respectively.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-11-13 14:30:37 -05:00
Steven Rostedt 8bc5e4ea3e ktest: Fix ktest confusion with CONFIG_MODULES_USE_ELF_RELA
In order to decide if ktest should bother installing modules on the
target box, it checks if the config file has CONFIG_MODULES=y. But it
also checks if the '=y' part exists. It only will install modules if the
config exists and is set with '=y'. But as the regex that was used
tests:

  /^CONFIG_MODULES(=y)?/

this will also match:

  CONFIG_MODULES_USE_ELF_RELA

as the '=y' part was optional and it did not test the rest of the line.
When this happens, ktest will stop checking the rest of the configs but
it will also think that no modules are needed to be installed. What it
should do is only jump out of the loop if it actually found a
CONFIG_MODULES that is set to true.

Otherwise, ktest wont install the necessary modules needed for proper
booting of the test target.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-10-26 00:10:32 -04:00
Linus Torvalds 35e9a274fd Merge branch 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kconfig changes from Michal Marek:
 "kconfig in v3.7 is going to
   - initialize ncurses only once in menuconfig
   - be able to jump to a search result in menuconfig
   - change the misnomer oldnoconfig to a more meaningful name
     olddefconfig, keeping the old name as alias"

* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kconfig: replace 'oldnoconfig' with 'olddefconfig', and keep the old name as an alias
  menuconfig: Assign jump keys per-page instead of globally
  menuconfig: Do not open code textbox scroll up/down
  menuconfig: Add jump keys to search results
  menuconfig: Extend dialog_textbox so that it can return to a scrolled position
  menuconfig: Extend dialog_textbox so that it can exit on arbitrary keypresses
  menuconfig: Remove superfluous conditionnal
  kconfig: document oldnoconfig to what it really does in conf.c
  kconfig/mconf.c: revision of curses initialization.
2012-10-12 10:28:52 +09:00
Linus Torvalds 6977b4c773 ktest update for v3.7
Fix parsing of ELSE IF in reading config file.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJQaZ0mAAoJEOdOSU1xswtMVzsIAIXFrMbOkDyo3brW0IVv3z1x
 EnZ6NPzIoEnQbAsiLT52tFJH3+C+c7vjKrEQx8OxsDaElv+pAuR9TOPJlxoGBd21
 wzQNXtdxDcGQKgWvOn/9ebkBAFe4GnWSWZc+LykI8QioQAitSIJfTu38a4Dyu2pG
 KZqpd+LHDeE+N5jg/tmT3sVCYOmR6Oui9rzqkhkVoGNlNZ6Q3ndPAAcv6A4lf7z8
 4UOAp/B8f6wbJblMPCjwcle1rMk6gfQ7Kcbli/Xm7U7cBwNhv/HJwWk9Zh/LrUjM
 3RVWJ1mXNVp0cTTKfAHrAWEWgm+vJtIkItnSWkkJnU3qwYltE0vs/CwIHOkeAFc=
 =lE0h
 -----END PGP SIGNATURE-----

Merge tag 'ktest-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest

Pull ktest fix from Steven Rostedt:
 "ktest has one fix needed for this merge window - fix parsing of ELSE
  IF in reading config file"

* tag 'ktest-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Fix ELSE IF statements
2012-10-01 10:13:47 -07:00
Linus Torvalds 99dbb1632f Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull the trivial tree from Jiri Kosina:
 "Tiny usual fixes all over the place"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits)
  doc: fix old config name of kprobetrace
  fs/fs-writeback.c: cleanup riteback_sb_inodes kerneldoc
  btrfs: fix the commment for the action flags in delayed-ref.h
  btrfs: fix trivial typo for the comment of BTRFS_FREE_INO_OBJECTID
  vfs: fix kerneldoc for generic_fh_to_parent()
  treewide: fix comment/printk/variable typos
  ipr: fix small coding style issues
  doc: fix broken utf8 encoding
  nfs: comment fix
  platform/x86: fix asus_laptop.wled_type module parameter
  mfd: printk/comment fixes
  doc: getdelays.c: remember to close() socket on error in create_nl_socket()
  doc: aliasing-test: close fd on write error
  mmc: fix comment typos
  dma: fix comments
  spi: fix comment/printk typos in spi
  Coccinelle: fix typo in memdup_user.cocci
  tmiofb: missing NULL pointer checks
  tools: perf: Fix typo in tools/perf
  tools/testing: fix comment / output typos
  ...
2012-10-01 09:06:36 -07:00
Adam Lee fb16d8912d kconfig: replace 'oldnoconfig' with 'olddefconfig', and keep the old name as an alias
As 67d34a6a39 said, 'oldnoconfig' doesn't
set new symbols to 'n', but instead sets it to their default values.

So, this patch replaces 'oldnoconfig' with 'olddefconfig', stop making
people confused, and keep the old name 'oldnoconfig' as an alias,
because people already are dependent on its behavior with the
counter-intuitive name.

Signed-off-by: Adam Lee <adam8157@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-09-27 18:18:07 +02:00
Steven Rostedt 95f5783841 ktest: Fix ELSE IF statements
The ELSE IF statements do not work as expected if another ELSE statement
follows. This is because the $if_set is not set. If the ELSE IF
condition is true, the following ELSE should be ignored. But because the
$if_set is not set, the following ELSE will also be executed.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-09-26 14:48:17 -04:00
Masanari Iida ce8283d56c tools/testing: fix comment / output typos
Correct spelling typo in tools/testing

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-01 08:48:19 -07:00
Steven Rostedt 8fddbe9bbf ktest: Allow perl regex expressions in conditional statements
Add '=~' and '!~' to the list of allowed conditionals for DEFAULT and
TEST_START section if statements.

ie.

 TEST_START IF TEST =~ .*test$

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-30 14:37:01 -04:00
Steven Rostedt 9b1d367dbb ktest: Ignore errors it tests if IGNORE_ERRORS is set
The option IGNORE_ERRORS is used to allow a test to succeed even if a
warning appears from the kernel. Sometimes kernels will produce warnings
that are not associated with a test, and the user wants to test
something else.

The IGNORE_ERRORS works for boot up, but was not preventing test runs to
succeed if the kernel produced a warning.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-30 14:33:55 -04:00
Steven Rostedt c1434dcc57 ktest: Reset saved min (force) configs for each test
The min configs are saved in a perl hash called force_configs, and this
hash is used to add configs to the .config file. But it was not being
reset between tests and a min config from a previous test would affect
the min config of the next test causing undesirable results.

Reset the force_config hash at the start of each test.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-20 22:39:16 -04:00
Steven Rostedt 8a80c72711 ktest: Add check for bug or panic during reboot
Usually the target is booted into a dependable kernel when a test
starts. The test will install the test kernel and reboot the box. But
there may be a time that the kernel is running an unreliable kernel and
the reboot may crash.

Have ktest detect crashes on a reboot and force a power-cycle instead.

This can usually happen if a test kernel was installed to run manual
tests, but the user forgot to reboot to the known good kernel.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-19 16:11:21 -04:00
Steven Rostedt 407b95b7a0 ktest: Add MAX_MONITOR_WAIT option
If the console is constantly outputting content, this can cause ktest
to get stuck waiting on the monitor to settle down.

The option MAX_MONITOR_WAIT is the maximum time (in seconds) for ktest
to wait for the console to flush.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-19 16:05:42 -04:00
Steven Rostedt cf79fab676 ktest: Fix config bisect with how make oldnoconfig works
With a name like 'oldnoconfig' one may think that the config generated
would disable all configs that were not defined (selecting "no" for all
options). But this is not the case. It selects the default. If a config
has a 'default y', then it is added if not specified.

This broke the config bisect, because options not specified by a config
will just use the default, where it expected to turn off. This caused an
option to be enabled that disabled an option that would break the build.
The end result was that we never found the bad config at the end of the
test.

Instead of using 'make oldnoconfig', ktest now builds the options it
expects enabled and disabled. When it turns off an option, it will no
longer remove it, but actually set it to:

 # CONFIG_FOO is not set.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-19 15:29:43 -04:00
Steven Rostedt b091861254 ktest: Add CONFIG_BISECT_CHECK option
The config-bisect can take a bad config and bisect it down to find out
what config actually breaks the config. But as all tests will apply a
minconfig (defined by a user) to apply before booting, it is possible
that the minconfig could actually make the bad config work (minconfigs
can disable configs). The end result is that the config bisect test will
not find a config that breaks. This can be rather frustrating to the
user.

The CONFIG_BISECT_CHECK option, when set to 1, will make sure that the
bad config (with the minconfig applied) still fails before trying to
bisect.

And yes, I did get burned by this.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-19 15:26:00 -04:00
Steven Rostedt e5c2ec11a0 ktest: Add PRE_INSTALL option
Add the PRE_INSTALL option that will allow a user to specify a shell
command to be executed before the install operation executes.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-19 15:22:05 -04:00
Steven Rostedt 921ed4c720 ktest: Add PRE/POST_KTEST and TEST options
In order to let the user add commands before and after ktest runs, the
PRE_KTEST and POST_KTEST options are defined. They hold shell commands
that will execute befor ktest runs its first test, as well as when it
completed its last test.

The PRE_TEST and POST_TEST will be run befor and after (respectively)
for a given test. They can either be global (done for all tests) or
defined by a single test.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-19 15:18:27 -04:00
Steven Rostedt 958d8435c2 ktest: Remove commented exit
A debug 'exit' was left in ktest.pl. Remove it.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-19 15:17:23 -04:00
Jesper Juhl 11c38b7575 ktest: Change singular "paranthesis" to plural "parentheses"
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-23 10:19:09 -04:00
Steven Rostedt 24d0c03014 ktest: Add README to explain what is in the examples directory
Add a README that explains what the different example configs in the
ktest example directory are about.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-22 00:15:12 -04:00
Steven Rostedt b6d300361b ktest: Add the snowball.conf example config
I used the snowball.conf in a live demo that demonstrated how to use
ktest.pl with a snowball ARM board. I've been asked to included that
config in the ktest repository.

Here it is.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-22 00:13:32 -04:00
Steven Rostedt 2e10952622 ktest: Add an example config that does cross compiling of several archs
Add the config that I use to test several archs. I downloaded several
cross compilers from:

 http://kernel.org/pub/tools/crosstool/files/bin/x86_64/

and this config is an example to crosscompile several archs to make sure
that your changes do not break archs that you are not working on.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-22 00:11:00 -04:00
Steven Rostedt 3a7bef7917 ktest: Add kvm.conf example config
Add an example config that explains how to use ktest with a virtual
guest as the target.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-22 00:10:12 -04:00
Steven Rostedt 6d76f469c8 ktest: Add useful example configs
I've been asked several times to provide more useful example configs for
ktest.pl, as the sample.conf is too complex (because it explains all
configs). This adds configs broken up by use case, and these configs are
based on actual configs that I use on a daily basis.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-22 00:08:30 -04:00
Steven Rostedt 43de3316e9 ktest: Add USE_OUTPUT_MIN_CONFIG to avoid prompt on make_min_config
If the file that OUTPUT_MIN_CONFIG exists then ktest.pl will prompt the
user and ask them if the OUTPUT_MIN_CONFIG should be used as the
starting point for make_min_config instead of MIN_CONFIG.

This is usually the case, and to allow the user to do so, which is
helpful if the user is creating different min configs based on tests,
and they know one is a superset of another test, they can set
USE_OUTPUT_MIN_CONFIG to one, which will prevent kest.pl from prompting
to use the OUTPUT_MIN_CONFIG and it will just use it.

If USE_OUTPUT_MIN_CONIFG is set to zero, then ktest.pl will continue to
use MIN_CONFIG instead.

The default is that USE_OUTPUT_MIN_CONFIG is undefined.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-22 00:07:34 -04:00