I have not been able to give dvb the attention it needs, and now I have
even less time. Of course I will continue to maintain rc-core (infrared).
Unfortunately this means that dvb will have maintainance issues.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The rkisp1 evolved over soc generations and the rk3326/px30 introduced
the so called v12 - probably meaning v1.2.
Add the new register definitions.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Rename V4L2 async notifier functions, replacing "notifier" with "nf" and
removing "_subdev" at the end of the function names adding subdevs as you
can only add subdevs to a notifier. Also wrap and otherwise clean up long
lines.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com> (imx7)
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Rework LP-11 and LP-111 mode documentation to make it more understandable
and useful. This involves adding pre_streamon and post_streamon callbacks
that make it possible to explicitly transition the transmitter to either
mode.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix kerneldoc syntax in v4l2-async. The references were not produced
correctly.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Modernise the documentation to make it more precise and update the use of
pixel rate control and various other changes. In particular:
- Use non-proportional font for file names, properties as well as
controls.
- The unit of the HBLANK control is pixels, not lines.
- The unit of PIXEL_RATE control is pixels per second, not Hz.
- Merge common requirements for CSI-2 and parallel busses.
- Include all DT properties needed for assigned clocks.
- Fix referencing the link rate control.
- SMIA driver's new name is CCS driver.
- The PIXEL_RATE control denotes pixel rate on the pixel array on camera
sensors. Do not suggest it is used to tell the maximum pixel rate on the
bus anymore.
- Improve ReST syntax (plain struct and function names).
- Remove the suggestion to use s_power() in receiver drivers.
- Make MIPI website URL use HTTPS, add Wikipedia links to BT.601 and
BT.656.
Fixes: e4cf8c58af ("media: Documentation: media: Document how to write camera sensor drivers")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The description of adap_enable was out-of-date. Improve it so that it
corresponds to what really happens.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Replace the occurences of the following character:
- U+00ad (''): SOFT HYPHEN
as ASCII HYPHEN is preferred over SOFT HYPHEN
At least with some fonts, a SOFT HYPHEN is displayed as
a blank space.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
According to the CCS spec the op_pll_multiplier address is 0x030e,
not 0x031e.
Signed-off-by: Bernhard Wimmer <be.wimm@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Rename v4l2_async_register_subdev_sensor_common as
v4l2_async_register_subdev_sensor. This is a part of the effort to make
the long names present in V4L2 fwnode and async frameworks shorter.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix a typo in the text.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The V4L2 temporary clock helper API, was introduced
in late 2012 and, as mentioned in the documentation,
meant to be replaced by the generic clock API,
once the generic clock framework became available
on all relevant architectures.
The generic clock API is a well-established API (since a few
years now). The last few media capture drivers and sensors
using v4l2-clk have been converted to the generic clock framework.
We can now remove the v4l2-clk API.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Acked-by: Petr Cvek <petrcvekcz@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Now that most users of v4l2_async_notifier_add_subdev have been converted,
let's fix the documentation so it's more clear how the v4l2-async API
should be used.
Document functions that drivers should use, and their purpose.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Current link died, according to Wayback Machine, back in 2017. And the
website is completely down since 2019. Moreover, there was a custom
cover on that PDF, i.e. it was modified.
According to HDMI licence agreement (LA), HDMI specification and technical
information are supposed to be hosted on www.hdmi.org exclusively, and not
redistributed by third-parties.
Sure, there are still many more or less reliable "mirrors" out there with
a direct download straight from a search engine's page. However, for
example, from FPGA4fun[1] website it was removed "per HDMI LA request".
Unfortunately, the official download page is protected by email CAPTCHA,
but that seems to be the only legit way to obtain a copy.
[1] https://www.fpga4fun.com/HDMI.html
Signed-off-by: ivan tkachenko <me@ratijas.tk>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
A reference to the sub-device pad ops was not follwed by a whitespace,
resulting in a warning during documentation build. Fix it.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 25c8d9a768 ("media: Documentation: v4l: Document that link_validate op is valid for sink only")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Include existing CCS PLL calculator kerneldoc documentation to the
documentation build.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Document pratices of handling clocks in camera sensor drivers on both DT
and ACPI.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Update the formula to calculate the pixel rate on the link for C-PHY.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The link_validate pad op will only be called on sink pads. Document this.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
We no longer have format related callbacks in video ops. Remove the
reference to them.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Move the SPDX tag to the top, placing the copyright notice after that.
This aligns the file with existing practices.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
As documentation used to be in .txt files before converting to ReST,
rename ccs-regs.txt to avoid it being taken as documentation that
pre-dates ReST conversion and so target for further conversion to ReST.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Document the MIPI CCS driver and the C register definition generator.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add register definitions of the MIPI CCS 1.1 standard.
The CCS driver makes extended use of device's capability registers that
are dependent on CCS version. This involves having an in-memory data
structure for limit and capability information, creating that data
structure and accessing it.
The register definitions as well as the definitions of this data structure
are generated from a text file using a Perl script. Add the generator
script to make it easy to update the generated files.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl/EM9oeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG/3kH/RNkFyTlHlUkZpJx
8Ks2yWgUln7YhZcmOaG/IcIyWnhCgo3l35kiaH7XxM+rPMZzidp51MHUllaTAQDc
u+5EFHMJsmTWUfE8ocHPb1cPdYEDSoVr6QUsixbL9+uADpRz+VZVtWMb89EiyMrC
wvLIzpnqY5UNriWWBxD0hrmSsT4g9XCsauer4k2KB+zvebwg6vFOMCFLFc2qz7fb
ABsrPFqLZOMp+16chGxyHP7LJ6ygI/Hwf7tPW8ppv4c+hes4HZg7yqJxXhV02QbJ
s10s6BTcEWMqKg/T6L/VoScsMHWUcNdvrr3uuPQhgup240XdmB1XO8rOKddw27e7
VIjrjNw=
=4ZaP
-----END PGP SIGNATURE-----
Merge tag 'v5.10-rc6' into patchwork
Linux 5.10-rc6
* tag 'v5.10-rc6': (1815 commits)
Linux 5.10-rc6
sock: set sk_err to ee_errno on dequeue from errq
mptcp: fix NULL ptr dereference on bad MPJ
net: openvswitch: fix TTL decrement action netlink message format
perf probe: Change function definition check due to broken DWARF
perf probe: Fix to die_entrypc() returns error correctly
perf stat: Use proper cpu for shadow stats
perf record: Synthesize cgroup events only if needed
perf diff: Fix error return value in __cmd_diff()
perf tools: Update copy of libbpf's hashmap.c
x86/mce: Do not overwrite no_way_out if mce_end() fails
kvm: x86/mmu: Fix get_mmio_spte() on CPUs supporting 5-level PT
KVM: x86: Fix split-irqchip vs interrupt injection window request
KVM: x86: handle !lapic_in_kernel case in kvm_cpu_*_extint
usb: typec: stusb160x: fix power-opmode property with typec-power-opmode
printk: finalize records with trailing newlines
can: af_can: can_rx_unregister(): remove WARN() statement from list operation sanity check
can: m_can: m_can_dev_setup(): add support for bosch mcan version 3.3.0
can: m_can: fix nominal bitiming tseg2 min for version >= 3.1
can: m_can: m_can_open(): remove IRQF_TRIGGER_FALLING from request_threaded_irq()'s flags
...
Drop the doubled word "errors".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Drop the doubled word "device".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Drop the doubled words "type" and "the".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Drop the doubled word "the".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Implement an Event Information Table (EIT) as per EN 300 468
5.2.4.
The EIT provides information in chronological order regarding
the events contained within each service.
For now only present event information is supported.
[mchehab+huawei@kernel.org: removed an extra blank line]
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add a Network Information Table (NIT) as specified in ETSI EN 300 468.
This table conveys information relating to the physical organization of
the multiplexes carried via a given network and the characteristics of
the network itself.
It is conveyed in the output of vidtv as packets with TS PID of 0x0010
[mchehab+huawei@kernel.org: removed an extra blank line]
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Raw camera sensors connected to parallel or CSI-2 busses need to implement
V4L2_CID_LINK_FREQ control so receiver drivers can configure the hardware
accordingly.
Document this. Also say V4L2_CID_PIXEL_RATE is recommended for such
hardware.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Remove extra "is" from sentence explaining V4L2_CID_PIXEL_RATE may be used
to tell the pixel rate used by a transmitter driver. Also call
V4L2_CID_PIXEL_RATE a control.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
cec-core.rst was missing 'are', and cec-ioc-g-mode.rst was missing
a comma.
In both cases this made the description of the Monitor All functionality
hard to read.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The :c:type:`foo` only works properly with structs before
Sphinx 3.x.
On Sphinx 3.x, structs should now be declared using the
.. c:struct, and referenced via :c:struct tag.
As we now have the automarkup.py macro, that automatically
convert:
struct foo
into cross-references, let's get rid of that, solving
several warnings when building docs with Sphinx 3.x.
Reviewed-by: André Almeida <andrealmeid@collabora.com> # blk-mq.rst
Reviewed-by: Takashi Iwai <tiwai@suse.de> # sound
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The new C domain code on Sphinx 3 doesn't allow anymore
to use c:type:: for structs.
Now that cdomain.py has backward support, let's use
c:struct:: instead.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
I was too quick moving zoran.rst... it ends that the original
patch didn't do the right thing and forgot to update the files
that references it.
Fix it.
Fixes: 6b90346919 ("media: zoran: move documentation file to the right place")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The new C domain code on Sphinx 3 is a lot more pedantic.
It only accepts real functions declared as c:function.
So, declarations like this are not valid:
.. c:function::
int (*adap_enable)(struct cec_adapter *adap, bool enable);
Also, no blank lines are allowed after ".. c:function:", and
continuation lines should be like:
.. c:function:
int (void foo, \
int bar);
Change the logic there, in order to avoid lots of warnings
when built with Sphinx 3.x.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are two kernel-doc markups for include/media/v4l2-async.h,
one at v4l2-async.rst and another one at v4l2-subdev.rst.
Sphinx 3.x checks it and complains for duplicated symbols.
So, get rid of one of them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Documentation/driver-api/media/camera-sensor.rst:123: WARNING: Inline literal start-string without end-string.
There's a missing blank space over there.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Documentation on how to call the subdev ops is currently in the middle of
synchronous and asynchronous registration. Move it to a dedicated
subsection after the registration methods.
Also move the final paragraph "The advantage of using v4l2_subdev..." to
the beginning of the new section as it has an introductory content.
[hverkuil: correct accidental deletion of the last part of a sentence]
Suggested-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The subdev registration topic is pretty lengthy, and takes more than
half of the "V4L2 sub-devices" section. Help readers in finding their
way through the document by dedicating a subsection to
"Subdev registration".
Each of the two registration methods takes many paragraphs, but since
adding a subsubsection would be overkill, just emphasize them in bold.
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sean Young