Because the setting of hporch is too small, there will be warning in
kernel log[1]. After fine tune the HFP and HBP, this warning can be
solved. The actual measurement frame rate is 60.1Hz.
[1]: WARNING kernel:[drm] HFP + HBP less than d-phy, FPS will under 60Hz
Fixes: 8716a6473e ("drm/panel: Support for Starry-ili9882t TDDI MIPI-DSI panel")
Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230627050148.2045691-1-yangcong5@huaqin.corp-partner.google.com
core:
- replace strlcpy with strscpy
- EDID changes to support further conversion to struct drm_edid
- Move i915 DSC parameter code to common DRM helpers
- Add Colorspace functionality
aperture:
- ignore framebuffers with non-primary devices
fbdev:
- use fbdev i/o helpers
- add Kconfig options for fb_ops helpers
- use new fb io helpers directly in drivers
sysfs:
- export DRM connector ID
scheduler:
- Avoid an infinite loop
ttm:
- store function table in .rodata
- Add query for TTM mem limit
- Add NUMA awareness to pools
- Export ttm_pool_fini()
bridge:
- fsl-ldb: support i.MX6SX
- lt9211, lt9611: remove blanking packets
- tc358768: implement input bus formats, devm cleanups
- ti-snd65dsi86: implement wait_hpd_asserted
- analogix: fix endless probe loop
- samsung-dsim: support swapped clock, fix enabling, support var clock
- display-connector: Add support for external power supply
- imx: Fix module linking
- tc358762: Support reset GPIO
panel:
- nt36523: Support Lenovo J606F
- st7703: Support Anbernic RG353V-V2
- InnoLux G070ACE-L01 support
- boe-tv101wum-nl6: Improve initialization
- sharp-ls043t1le001: Mode fixes
- simple: BOE EV121WXM-N10-1850, S6D7AA0
- Ampire AM-800480L1TMQW-T00H
- Rocktech RK043FN48H
- Starry himax83102-j02
- Starry ili9882t
amdgpu:
- add new ctx query flag to handle reset better
- add new query/set shadow buffer for rdna3
- DCN 3.2/3.1.x/3.0.x updates
- Enable DC_FP on loongarch
- PCIe fix for RDNA2
- improve DC FAMS/SubVP support for better power management
- partition support for lots of engines
- Take NUMA into account when allocating memory
- Add new DRM_AMDGPU_WERROR config parameter to help with CI
- Initial SMU13 overdrive support
- Add support for new colorspace KMS API
- W=1 fixes
amdkfd:
- Query TTM mem limit rather than hardcoding it
- GC 9.4.3 partition support
- Handle NUMA for partitions
- Add debugger interface for enabling gdb
- Add KFD event age tracking
radeon:
- Fix possible UAF
i915:
- new getparam for PXP support
- GSC/MEI proxy driver
- Meteorlake display enablement
- avoid clearing preallocated framebuffers with TTM
- implement framebuffer mmap support
- Disable sampler indirect state in bindless heap
- Enable fdinfo for GuC backends
- GuC loading and firmware table handling fixes
- Various refactors for multi-tile enablement
- Define MOCS and PAT tables for MTL
- GSC/MEI support for Meteorlake
- PMU multi-tile support
- Large driver kernel doc cleanup
- Allow VRR toggling and arbitrary refresh rates
- Support async flips on linear buffers on display ver 12+
- Expose CRTC CTM property on ILK/SNB/VLV
- New debugfs for display clock frequencies
- Hotplug refactoring
- Display refactoring
- I915_GEM_CREATE_EXT_SET_PAT for Mesa on Meteorlake
- Use large rings for compute contexts
- HuC loading for MTL
- Allow user to set cache at BO creation
- MTL powermanagement enhancements
- Switch to dedicated workqueues to stop using flush_scheduled_work()
- Move display runtime init under display/
- Remove 10bit gamma on desktop gen3 parts, they don't support it
habanalabs:
- uapi: return 0 for user queries if there was a h/w or f/w error
- Add pci health check when we lose connection with the firmware. This can be used to
distinguish between pci link down and firmware getting stuck.
- Add more info to the error print when TPC interrupt occur.
- Firmware fixes
msm:
- Adreno A660 bindings
- SM8350 MDSS bindings fix
- Added support for DPU on sm6350 and sm6375 platforms
- Implemented tearcheck support to support vsync on SM150 and newer platforms
- Enabled missing features (DSPP, DSC, split display) on sc8180x, sc8280xp, sm8450
- Added support for DSI and 28nm DSI PHY on MSM8226 platform
- Added support for DSI on sm6350 and sm6375 platforms
- Added support for display controller on MSM8226 platform
- A690 GPU support
- Move cmdstream dumping out of fence signaling path
- a610 support
- Support for a6xx devices without GMU
nouveau:
- NULL ptr before deref fixes
armada:
- implement fbdev emulation as client
sun4i:
- fix mipi-dsi dotclock
- release clocks
vc4:
- rgb range toggle property
- BT601 / BT2020 HDMI support
vkms:
- convert to drmm helpers
- add reflection and rotation support
- fix rgb565 conversion
gma500:
- fix iomem access
shmobile:
- support renesas soc platform
- enable fbdev
mxsfb:
- Add support for i.MX93 LCDIF
stm:
- dsi: Use devm_ helper
- ltdc: Fix potential invalid pointer deref
renesas:
- Group drivers in renesas subdirectory to prepare for new platform
- Drop deprecated R-Car H3 ES1.x support
meson:
- Add support for MIPI DSI displays
virtio:
- add sync object support
mediatek:
- Add display binding document for MT6795
-----BEGIN PGP SIGNATURE-----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=FmUA
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2023-06-29' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"There is one set of patches to misc for a i915 gsc/mei proxy driver.
Otherwise it's mostly amdgpu/i915/msm, lots of hw enablement and lots
of refactoring.
core:
- replace strlcpy with strscpy
- EDID changes to support further conversion to struct drm_edid
- Move i915 DSC parameter code to common DRM helpers
- Add Colorspace functionality
aperture:
- ignore framebuffers with non-primary devices
fbdev:
- use fbdev i/o helpers
- add Kconfig options for fb_ops helpers
- use new fb io helpers directly in drivers
sysfs:
- export DRM connector ID
scheduler:
- Avoid an infinite loop
ttm:
- store function table in .rodata
- Add query for TTM mem limit
- Add NUMA awareness to pools
- Export ttm_pool_fini()
bridge:
- fsl-ldb: support i.MX6SX
- lt9211, lt9611: remove blanking packets
- tc358768: implement input bus formats, devm cleanups
- ti-snd65dsi86: implement wait_hpd_asserted
- analogix: fix endless probe loop
- samsung-dsim: support swapped clock, fix enabling, support var
clock
- display-connector: Add support for external power supply
- imx: Fix module linking
- tc358762: Support reset GPIO
panel:
- nt36523: Support Lenovo J606F
- st7703: Support Anbernic RG353V-V2
- InnoLux G070ACE-L01 support
- boe-tv101wum-nl6: Improve initialization
- sharp-ls043t1le001: Mode fixes
- simple: BOE EV121WXM-N10-1850, S6D7AA0
- Ampire AM-800480L1TMQW-T00H
- Rocktech RK043FN48H
- Starry himax83102-j02
- Starry ili9882t
amdgpu:
- add new ctx query flag to handle reset better
- add new query/set shadow buffer for rdna3
- DCN 3.2/3.1.x/3.0.x updates
- Enable DC_FP on loongarch
- PCIe fix for RDNA2
- improve DC FAMS/SubVP support for better power management
- partition support for lots of engines
- Take NUMA into account when allocating memory
- Add new DRM_AMDGPU_WERROR config parameter to help with CI
- Initial SMU13 overdrive support
- Add support for new colorspace KMS API
- W=1 fixes
amdkfd:
- Query TTM mem limit rather than hardcoding it
- GC 9.4.3 partition support
- Handle NUMA for partitions
- Add debugger interface for enabling gdb
- Add KFD event age tracking
radeon:
- Fix possible UAF
i915:
- new getparam for PXP support
- GSC/MEI proxy driver
- Meteorlake display enablement
- avoid clearing preallocated framebuffers with TTM
- implement framebuffer mmap support
- Disable sampler indirect state in bindless heap
- Enable fdinfo for GuC backends
- GuC loading and firmware table handling fixes
- Various refactors for multi-tile enablement
- Define MOCS and PAT tables for MTL
- GSC/MEI support for Meteorlake
- PMU multi-tile support
- Large driver kernel doc cleanup
- Allow VRR toggling and arbitrary refresh rates
- Support async flips on linear buffers on display ver 12+
- Expose CRTC CTM property on ILK/SNB/VLV
- New debugfs for display clock frequencies
- Hotplug refactoring
- Display refactoring
- I915_GEM_CREATE_EXT_SET_PAT for Mesa on Meteorlake
- Use large rings for compute contexts
- HuC loading for MTL
- Allow user to set cache at BO creation
- MTL powermanagement enhancements
- Switch to dedicated workqueues to stop using flush_scheduled_work()
- Move display runtime init under display/
- Remove 10bit gamma on desktop gen3 parts, they don't support it
habanalabs:
- uapi: return 0 for user queries if there was a h/w or f/w error
- Add pci health check when we lose connection with the firmware.
This can be used to distinguish between pci link down and firmware
getting stuck.
- Add more info to the error print when TPC interrupt occur.
- Firmware fixes
msm:
- Adreno A660 bindings
- SM8350 MDSS bindings fix
- Added support for DPU on sm6350 and sm6375 platforms
- Implemented tearcheck support to support vsync on SM150 and newer
platforms
- Enabled missing features (DSPP, DSC, split display) on sc8180x,
sc8280xp, sm8450
- Added support for DSI and 28nm DSI PHY on MSM8226 platform
- Added support for DSI on sm6350 and sm6375 platforms
- Added support for display controller on MSM8226 platform
- A690 GPU support
- Move cmdstream dumping out of fence signaling path
- a610 support
- Support for a6xx devices without GMU
nouveau:
- NULL ptr before deref fixes
armada:
- implement fbdev emulation as client
sun4i:
- fix mipi-dsi dotclock
- release clocks
vc4:
- rgb range toggle property
- BT601 / BT2020 HDMI support
vkms:
- convert to drmm helpers
- add reflection and rotation support
- fix rgb565 conversion
gma500:
- fix iomem access
shmobile:
- support renesas soc platform
- enable fbdev
mxsfb:
- Add support for i.MX93 LCDIF
stm:
- dsi: Use devm_ helper
- ltdc: Fix potential invalid pointer deref
renesas:
- Group drivers in renesas subdirectory to prepare for new platform
- Drop deprecated R-Car H3 ES1.x support
meson:
- Add support for MIPI DSI displays
virtio:
- add sync object support
mediatek:
- Add display binding document for MT6795"
* tag 'drm-next-2023-06-29' of git://anongit.freedesktop.org/drm/drm: (1791 commits)
drm/i915: Fix a NULL vs IS_ERR() bug
drm/i915: make i915_drm_client_fdinfo() reference conditional again
drm/i915/huc: Fix missing error code in intel_huc_init()
drm/i915/gsc: take a wakeref for the proxy-init-completion check
drm/msm/a6xx: Add A610 speedbin support
drm/msm/a6xx: Add A619_holi speedbin support
drm/msm/a6xx: Use adreno_is_aXYZ macros in speedbin matching
drm/msm/a6xx: Use "else if" in GPU speedbin rev matching
drm/msm/a6xx: Fix some A619 tunables
drm/msm/a6xx: Add A610 support
drm/msm/a6xx: Add support for A619_holi
drm/msm/adreno: Disable has_cached_coherent in GMU wrapper configurations
drm/msm/a6xx: Introduce GMU wrapper support
drm/msm/a6xx: Move CX GMU power counter enablement to hw_init
drm/msm/a6xx: Extend and explain UBWC config
drm/msm/a6xx: Remove both GBIF and RBBM GBIF halt on hw init
drm/msm/a6xx: Add a helper for software-resetting the GPU
drm/msm/a6xx: Improve a6xx_bus_clear_pending_transactions()
drm/msm/a6xx: Move a6xx_bus_clear_pending_transactions to a6xx_gpu
drm/msm/a6xx: Move force keepalive vote removal to a6xx_gmu_force_off()
...
SoC support. Instead there's a treewide patch series from Maxime that makes
clk_ops::determine_rate mandatory for muxes. Beyond that core framework change
we have the usual pile of clk driver updates such as migrating i2c drivers to
use .probe() again or YAMLfication of clk DT bindings so we can validate DTBs.
Overall the SoCs that got the most updates this time around in terms of
diffstat are the Amlogic and Mediatek drivers because they added new SoC
support or fixed up various drivers to have proper data.
In general things look kinda quiet. I suspect the core framework change may
still shake out some problems after the merge window, mostly because not
everyone tests linux-next where that series has been for some number of weeks.
I saw that there's at least one pending fix for Tegra that needs to be wrapped
up into a proper patch. I'll try to catch those bits before the window closes
so that -rc1 is bootable. More details below.
Core:
- Make clk_ops::determine_rate mandatory for muxes
New Drivers:
- Add amlogic a1 SoC family PLL and peripheral clock controller support
Updates:
- Handle allocation failures from kasprintf() and friends
- Migrate platform clk drivers to .remove_new()
- Migrate i2c clk drivers to .probe() instead of .probe_new()
- Remove CLK_SET_PARENT from all Mediatek MSDC core clocks
- Add infra_ao reset support for Mediatek MT8188 SoCs
- Align driver_data to i2c_device_id tables in some i2c clk drivers
- Use device_get_match_data() in vc5 clk driver
- New Kconfig symbol name (SOC_MICROCHIP_POLARFIRE) for Microchip FPGA clock
drivers
- Use of_property_read_bool() to read "microchip,pic32mzda-sosc" boolean DT
property in clk-pic32mzda
- Convert AT91 clock dt-bindings to YAML
- Remove CLK_SET_RATE_PARENT flag from LDB clocks on i.MX6SX
- Keep i.MX UART clocks enabled during kernel boot if earlycon is set
- Drop imx_unregister_clocks() as there are no users anymore
- Switch to _safe iterator on imx_clk_scu_unregister() to avoid use after free
- Add determine_rate op to the imx8m composite clock
- Use device managed API for iomap and kzalloc for i.MXRT1050, i.MX8MN,
i.MX8MP and i.MX93 clock controller drivers
- Add missing interrupt DT property for the i.MX8M clock controller
- Re-add support for Exynos4212 clock controller because we are
re-introducing the SoC in the mainline
- Add CONFIG_OF dependency to Samsung clk Kconfig symbols to solve some
objtool warnings
- Preselect PLL MIPI as TCON0 parent for Allwinner A64 SoC
- Convert the Renesas clock drivers to readl_poll_timeout_atomic()
- Add PWM clock on Renesas R-Car V3U
- Fix PLL5 on Renesas RZ/G2L and RZ/V2L
-----BEGIN PGP SIGNATURE-----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=6M8D
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This batch of clk driver updates contains almost no new SoC support.
Instead there's a treewide patch series from Maxime that makes
clk_ops::determine_rate mandatory for muxes.
Beyond that core framework change we have the usual pile of clk driver
updates such as migrating i2c drivers to use .probe() again or
YAMLfication of clk DT bindings so we can validate DTBs.
Overall the SoCs that got the most updates this time around in terms
of diffstat are the Amlogic and Mediatek drivers because they added
new SoC support or fixed up various drivers to have proper data.
In general things look kinda quiet. I suspect the core framework
change may still shake out some problems after the merge window,
mostly because not everyone tests linux-next where that series has
been for some number of weeks. I saw that there's at least one pending
fix for Tegra that needs to be wrapped up into a proper patch. I'll
try to catch those bits before the window closes so that -rc1 is
bootable. More details below.
Core:
- Make clk_ops::determine_rate mandatory for muxes
New Drivers:
- Add amlogic a1 SoC family PLL and peripheral clock controller support
Updates:
- Handle allocation failures from kasprintf() and friends
- Migrate platform clk drivers to .remove_new()
- Migrate i2c clk drivers to .probe() instead of .probe_new()
- Remove CLK_SET_PARENT from all Mediatek MSDC core clocks
- Add infra_ao reset support for Mediatek MT8188 SoCs
- Align driver_data to i2c_device_id tables in some i2c clk drivers
- Use device_get_match_data() in vc5 clk driver
- New Kconfig symbol name (SOC_MICROCHIP_POLARFIRE) for Microchip
FPGA clock drivers
- Use of_property_read_bool() to read "microchip,pic32mzda-sosc"
boolean DT property in clk-pic32mzda
- Convert AT91 clock dt-bindings to YAML
- Remove CLK_SET_RATE_PARENT flag from LDB clocks on i.MX6SX
- Keep i.MX UART clocks enabled during kernel boot if earlycon is set
- Drop imx_unregister_clocks() as there are no users anymore
- Switch to _safe iterator on imx_clk_scu_unregister() to avoid use
after free
- Add determine_rate op to the imx8m composite clock
- Use device managed API for iomap and kzalloc for i.MXRT1050,
i.MX8MN, i.MX8MP and i.MX93 clock controller drivers
- Add missing interrupt DT property for the i.MX8M clock controller
- Re-add support for Exynos4212 clock controller because we are
re-introducing the SoC in the mainline
- Add CONFIG_OF dependency to Samsung clk Kconfig symbols to solve
some objtool warnings
- Preselect PLL MIPI as TCON0 parent for Allwinner A64 SoC
- Convert the Renesas clock drivers to readl_poll_timeout_atomic()
- Add PWM clock on Renesas R-Car V3U
- Fix PLL5 on Renesas RZ/G2L and RZ/V2L"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (149 commits)
clk: fix typo in clk_hw_register_fixed_rate_parent_data() macro
clk: Fix memory leak in devm_clk_notifier_register()
clk: mvebu: Iterate over possible CPUs instead of DT CPU nodes
clk: mvebu: Use of_get_cpu_hwid() to read CPU ID
MAINTAINERS: Add Marvell mvebu clock drivers
clk: clocking-wizard: check return value of devm_kasprintf()
clk: ti: clkctrl: check return value of kasprintf()
clk: keystone: sci-clk: check return value of kasprintf()
clk: si5341: free unused memory on probe failure
clk: si5341: check return value of {devm_}kasprintf()
clk: si5341: return error if one synth clock registration fails
clk: cdce925: check return value of kasprintf()
clk: vc5: check memory returned by kasprintf()
clk: mediatek: clk-mt8173-apmixedsys: Fix iomap not released issue
clk: mediatek: clk-mt8173-apmixedsys: Fix return value for of_iomap() error
clk: mediatek: clk-mtk: Grab iomem pointer for divider clocks
clk: keystone: syscon-clk: Add support for audio refclk
dt-bindings: clock: Add binding documentation for TI Audio REFCLK
dt-bindings: clock: ehrpwm: Remove unneeded syscon compatible
clk: keystone: syscon-clk: Allow the clock node to not be of type syscon
...
- Yosry has also eliminated cgroup's atomic rstat flushing.
- Nhat Pham adds the new cachestat() syscall. It provides userspace
with the ability to query pagecache status - a similar concept to
mincore() but more powerful and with improved usability.
- Mel Gorman provides more optimizations for compaction, reducing the
prevalence of page rescanning.
- Lorenzo Stoakes has done some maintanance work on the get_user_pages()
interface.
- Liam Howlett continues with cleanups and maintenance work to the maple
tree code. Peng Zhang also does some work on maple tree.
- Johannes Weiner has done some cleanup work on the compaction code.
- David Hildenbrand has contributed additional selftests for
get_user_pages().
- Thomas Gleixner has contributed some maintenance and optimization work
for the vmalloc code.
- Baolin Wang has provided some compaction cleanups,
- SeongJae Park continues maintenance work on the DAMON code.
- Huang Ying has done some maintenance on the swap code's usage of
device refcounting.
- Christoph Hellwig has some cleanups for the filemap/directio code.
- Ryan Roberts provides two patch series which yield some
rationalization of the kernel's access to pte entries - use the provided
APIs rather than open-coding accesses.
- Lorenzo Stoakes has some fixes to the interaction between pagecache
and directio access to file mappings.
- John Hubbard has a series of fixes to the MM selftesting code.
- ZhangPeng continues the folio conversion campaign.
- Hugh Dickins has been working on the pagetable handling code, mainly
with a view to reducing the load on the mmap_lock.
- Catalin Marinas has reduced the arm64 kmalloc() minimum alignment from
128 to 8.
- Domenico Cerasuolo has improved the zswap reclaim mechanism by
reorganizing the LRU management.
- Matthew Wilcox provides some fixups to make gfs2 work better with the
buffer_head code.
- Vishal Moola also has done some folio conversion work.
- Matthew Wilcox has removed the remnants of the pagevec code - their
functionality is migrated over to struct folio_batch.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZJejewAKCRDdBJ7gKXxA
joggAPwKMfT9lvDBEUnJagY7dbDPky1cSYZdJKxxM2cApGa42gEA6Cl8HRAWqSOh
J0qXCzqaaN8+BuEyLGDVPaXur9KirwY=
=B7yQ
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
- Yosry Ahmed brought back some cgroup v1 stats in OOM logs
- Yosry has also eliminated cgroup's atomic rstat flushing
- Nhat Pham adds the new cachestat() syscall. It provides userspace
with the ability to query pagecache status - a similar concept to
mincore() but more powerful and with improved usability
- Mel Gorman provides more optimizations for compaction, reducing the
prevalence of page rescanning
- Lorenzo Stoakes has done some maintanance work on the
get_user_pages() interface
- Liam Howlett continues with cleanups and maintenance work to the
maple tree code. Peng Zhang also does some work on maple tree
- Johannes Weiner has done some cleanup work on the compaction code
- David Hildenbrand has contributed additional selftests for
get_user_pages()
- Thomas Gleixner has contributed some maintenance and optimization
work for the vmalloc code
- Baolin Wang has provided some compaction cleanups,
- SeongJae Park continues maintenance work on the DAMON code
- Huang Ying has done some maintenance on the swap code's usage of
device refcounting
- Christoph Hellwig has some cleanups for the filemap/directio code
- Ryan Roberts provides two patch series which yield some
rationalization of the kernel's access to pte entries - use the
provided APIs rather than open-coding accesses
- Lorenzo Stoakes has some fixes to the interaction between pagecache
and directio access to file mappings
- John Hubbard has a series of fixes to the MM selftesting code
- ZhangPeng continues the folio conversion campaign
- Hugh Dickins has been working on the pagetable handling code, mainly
with a view to reducing the load on the mmap_lock
- Catalin Marinas has reduced the arm64 kmalloc() minimum alignment
from 128 to 8
- Domenico Cerasuolo has improved the zswap reclaim mechanism by
reorganizing the LRU management
- Matthew Wilcox provides some fixups to make gfs2 work better with the
buffer_head code
- Vishal Moola also has done some folio conversion work
- Matthew Wilcox has removed the remnants of the pagevec code - their
functionality is migrated over to struct folio_batch
* tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (380 commits)
mm/hugetlb: remove hugetlb_set_page_subpool()
mm: nommu: correct the range of mmap_sem_read_lock in task_mem()
hugetlb: revert use of page_cache_next_miss()
Revert "page cache: fix page_cache_next/prev_miss off by one"
mm/vmscan: fix root proactive reclaim unthrottling unbalanced node
mm: memcg: rename and document global_reclaim()
mm: kill [add|del]_page_to_lru_list()
mm: compaction: convert to use a folio in isolate_migratepages_block()
mm: zswap: fix double invalidate with exclusive loads
mm: remove unnecessary pagevec includes
mm: remove references to pagevec
mm: rename invalidate_mapping_pagevec to mapping_try_invalidate
mm: remove struct pagevec
net: convert sunrpc from pagevec to folio_batch
i915: convert i915_gpu_error to use a folio_batch
pagevec: rename fbatch_count()
mm: remove check_move_unevictable_pages()
drm: convert drm_gem_put_pages() to use a folio_batch
i915: convert shmem_sg_free_table() to use a folio_batch
scatterlist: add sg_set_folio()
...
- Fix KMSAN vs FORTIFY in strlcpy/strlcat (Alexander Potapenko)
- Convert strreplace() to return string start (Andy Shevchenko)
- Flexible array conversions (Arnd Bergmann, Wyes Karny, Kees Cook)
- Add missing function prototypes seen with W=1 (Arnd Bergmann)
- Fix strscpy() kerndoc typo (Arne Welzel)
- Replace strlcpy() with strscpy() across many subsystems which were
either Acked by respective maintainers or were trivial changes that
went ignored for multiple weeks (Azeem Shaikh)
- Remove unneeded cc-option test for UBSAN_TRAP (Nick Desaulniers)
- Add KUnit tests for strcat()-family
- Enable KUnit tests of FORTIFY wrappers under UML
- Add more complete FORTIFY protections for strlcat()
- Add missed disabling of FORTIFY for all arch purgatories.
- Enable -fstrict-flex-arrays=3 globally
- Tightening UBSAN_BOUNDS when using GCC
- Improve checkpatch to check for strcpy, strncpy, and fake flex arrays
- Improve use of const variables in FORTIFY
- Add requested struct_size_t() helper for types not pointers
- Add __counted_by macro for annotating flexible array size members
-----BEGIN PGP SIGNATURE-----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=s0j1
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"There are three areas of note:
A bunch of strlcpy()->strscpy() conversions ended up living in my tree
since they were either Acked by maintainers for me to carry, or got
ignored for multiple weeks (and were trivial changes).
The compiler option '-fstrict-flex-arrays=3' has been enabled
globally, and has been in -next for the entire devel cycle. This
changes compiler diagnostics (though mainly just -Warray-bounds which
is disabled) and potential UBSAN_BOUNDS and FORTIFY _warning_
coverage. In other words, there are no new restrictions, just
potentially new warnings. Any new FORTIFY warnings we've seen have
been fixed (usually in their respective subsystem trees). For more
details, see commit df8fc4e934.
The under-development compiler attribute __counted_by has been added
so that we can start annotating flexible array members with their
associated structure member that tracks the count of flexible array
elements at run-time. It is possible (likely?) that the exact syntax
of the attribute will change before it is finalized, but GCC and Clang
are working together to sort it out. Any changes can be made to the
macro while we continue to add annotations.
As an example of that last case, I have a treewide commit waiting with
such annotations found via Coccinelle:
https://git.kernel.org/linus/adc5b3cb48a049563dc673f348eab7b6beba8a9b
Also see commit dd06e72e68 for more details.
Summary:
- Fix KMSAN vs FORTIFY in strlcpy/strlcat (Alexander Potapenko)
- Convert strreplace() to return string start (Andy Shevchenko)
- Flexible array conversions (Arnd Bergmann, Wyes Karny, Kees Cook)
- Add missing function prototypes seen with W=1 (Arnd Bergmann)
- Fix strscpy() kerndoc typo (Arne Welzel)
- Replace strlcpy() with strscpy() across many subsystems which were
either Acked by respective maintainers or were trivial changes that
went ignored for multiple weeks (Azeem Shaikh)
- Remove unneeded cc-option test for UBSAN_TRAP (Nick Desaulniers)
- Add KUnit tests for strcat()-family
- Enable KUnit tests of FORTIFY wrappers under UML
- Add more complete FORTIFY protections for strlcat()
- Add missed disabling of FORTIFY for all arch purgatories.
- Enable -fstrict-flex-arrays=3 globally
- Tightening UBSAN_BOUNDS when using GCC
- Improve checkpatch to check for strcpy, strncpy, and fake flex
arrays
- Improve use of const variables in FORTIFY
- Add requested struct_size_t() helper for types not pointers
- Add __counted_by macro for annotating flexible array size members"
* tag 'hardening-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (54 commits)
netfilter: ipset: Replace strlcpy with strscpy
uml: Replace strlcpy with strscpy
um: Use HOST_DIR for mrproper
kallsyms: Replace all non-returning strlcpy with strscpy
sh: Replace all non-returning strlcpy with strscpy
of/flattree: Replace all non-returning strlcpy with strscpy
sparc64: Replace all non-returning strlcpy with strscpy
Hexagon: Replace all non-returning strlcpy with strscpy
kobject: Use return value of strreplace()
lib/string_helpers: Change returned value of the strreplace()
jbd2: Avoid printing outside the boundary of the buffer
checkpatch: Check for 0-length and 1-element arrays
riscv/purgatory: Do not use fortified string functions
s390/purgatory: Do not use fortified string functions
x86/purgatory: Do not use fortified string functions
acpi: Replace struct acpi_table_slit 1-element array with flex-array
clocksource: Replace all non-returning strlcpy with strscpy
string: use __builtin_memcpy() in strlcpy/strlcat
staging: most: Replace all non-returning strlcpy with strscpy
drm/i2c: tda998x: Replace all non-returning strlcpy with strscpy
...
- Build footprint & performance improvements:
- Reduce memory usage with CONFIG_DEBUG_INFO=y
In the worst case of an allyesconfig+CONFIG_DEBUG_INFO=y kernel, DWARF
creates almost 200 million relocations, ballooning objtool's peak heap
usage to 53GB. These patches reduce that to 25GB.
On a distro-type kernel with kernel IBT enabled, they reduce objtool's
peak heap usage from 4.2GB to 2.8GB.
These changes also improve the runtime significantly.
- Debuggability improvements:
- Add the unwind_debug command-line option, for more extend unwinding
debugging output.
- Limit unreachable warnings to once per function
- Add verbose option for disassembling affected functions
- Include backtrace in verbose mode
- Detect missing __noreturn annotations
- Ignore exc_double_fault() __noreturn warnings
- Remove superfluous global_noreturns entries
- Move noreturn function list to separate file
- Add __kunit_abort() to noreturns
- Unwinder improvements:
- Allow stack operations in UNWIND_HINT_UNDEFINED regions
- drm/vmwgfx: Add unwind hints around RBP clobber
- Cleanups:
- Move the x86 entry thunk restore code into thunk functions
- x86/unwind/orc: Use swap() instead of open coding it
- Remove unnecessary/unused variables
- Fixes for modern stack canary handling
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=uNnc
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molar:
"Build footprint & performance improvements:
- Reduce memory usage with CONFIG_DEBUG_INFO=y
In the worst case of an allyesconfig+CONFIG_DEBUG_INFO=y kernel,
DWARF creates almost 200 million relocations, ballooning objtool's
peak heap usage to 53GB. These patches reduce that to 25GB.
On a distro-type kernel with kernel IBT enabled, they reduce
objtool's peak heap usage from 4.2GB to 2.8GB.
These changes also improve the runtime significantly.
Debuggability improvements:
- Add the unwind_debug command-line option, for more extend unwinding
debugging output
- Limit unreachable warnings to once per function
- Add verbose option for disassembling affected functions
- Include backtrace in verbose mode
- Detect missing __noreturn annotations
- Ignore exc_double_fault() __noreturn warnings
- Remove superfluous global_noreturns entries
- Move noreturn function list to separate file
- Add __kunit_abort() to noreturns
Unwinder improvements:
- Allow stack operations in UNWIND_HINT_UNDEFINED regions
- drm/vmwgfx: Add unwind hints around RBP clobber
Cleanups:
- Move the x86 entry thunk restore code into thunk functions
- x86/unwind/orc: Use swap() instead of open coding it
- Remove unnecessary/unused variables
Fixes for modern stack canary handling"
* tag 'objtool-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
x86/orc: Make the is_callthunk() definition depend on CONFIG_BPF_JIT=y
objtool: Skip reading DWARF section data
objtool: Free insns when done
objtool: Get rid of reloc->rel[a]
objtool: Shrink elf hash nodes
objtool: Shrink reloc->sym_reloc_entry
objtool: Get rid of reloc->jump_table_start
objtool: Get rid of reloc->addend
objtool: Get rid of reloc->type
objtool: Get rid of reloc->offset
objtool: Get rid of reloc->idx
objtool: Get rid of reloc->list
objtool: Allocate relocs in advance for new rela sections
objtool: Add for_each_reloc()
objtool: Don't free memory in elf_close()
objtool: Keep GElf_Rel[a] structs synced
objtool: Add elf_create_section_pair()
objtool: Add mark_sec_changed()
objtool: Fix reloc_hash size
objtool: Consolidate rel/rela handling
...
Add the seq_file struct forward declaration to intel_display_power.h
fixing the build error below. While at it add the rest of missing
forward declarations/includes to the display power header files.
In file included from <command-line>:
./../drivers/gpu/drm/i915/display/intel_display_power.h:255:70: error: 'struct seq_file'
declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
255 | void intel_display_power_debug(struct drm_i915_private *i915, struct seq_file *m);
| ^~~~~~~~
Closes: https://lore.kernel.org/intel-gfx/89adc1ac-25a0-6eb6-4cc9-ab6cc8d49730@infradead.org/
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230616185104.2502003-1-imre.deak@intel.com
(cherry picked from commit f4fab137dd)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Currently hdcp->content_type is being assigned the content_type field
in drm_connector_state which is wrong and instead it needs to be
assigned hdcp_content_type field from drm_connector_state
Fixes: 4c4279a8d5 ("drm/i915/hdcp: add intel_atomic_state argument to hdcp_enable function")
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230622083254.2057102-1-suraj.kandpal@intel.com
(cherry picked from commit 86a124424e)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
The scenario being fixed here is depicted in the following sequence-
modprobe i915
echo 1 > /sys/class/drm/card0/gt/gt0/slpc_ignore_eff_freq
echo 300 > /sys/class/drm/card0/gt_min_freq_mhz (RPn)
cat /sys/class/drm/card0/gt_cur_freq_mhz --> cur == RPn as expected
echo 1 > /sys/kernel/debug/dri/0/gt0/reset --> reset
cat /sys/class/drm/card0/gt_min_freq_mhz --> cached freq is RPn
cat /sys/class/drm/card0/gt_cur_freq_mhz --> it's not RPn, but RPe!!
When SLPC reinitializes, it sets SLPC min freq to efficient frequency.
Even if we disable efficient freq post that, we should restore the cached
min freq (via H2G) for it to take effect.
v2: Clarify commit message (Ashutosh)
Fixes: 95ccf312a1 ("drm/i915/guc/slpc: Allow SLPC to use efficient frequency")
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230621014257.1769564-1-vinay.belgaumkar@intel.com
(cherry picked from commit da86b2b13f)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Encoder compute config is changing hw.adjusted mode. Uapi.adjusted mode
doesn't get updated before psr compute config gets called. This causes io
and fast wake line calculation using adjusted mode containing values before
encoder adjustments. Fix this by using hw.adjusted mode instead of
uapi.adjusted mode.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8475
Fixes: cb42e8ede5 ("drm/i915/psr: Use calculated io and fast wake lines")
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230620111745.2870706-1-jouni.hogander@intel.com
(cherry picked from commit ef0af9db2a)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Driver does not clear the default SSC for MPLLA. This causes link training
failure when trying to use 10G and 20G rates. Fix the behaviour and enable
ssc only when we really want.
Fixes: 237e7be0bf ("drm/i915/mtl: For DP2.0 10G and 20G rates use MPLLA")
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Clint Taylor <Clinton.A.Taylor@intel.com>
Cc: Khaled Almahallawy <khaled.almahallawy@intel.com>
Cc: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230616043950.1576836-1-radhakrishna.sripada@intel.com
(cherry picked from commit 7e8d87e2da)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
A recent bspec update added a restriction on when DC states can be enabled:
[Before enabling DC states:]
"""
PG2 can be kept enabled only because PGB requires PG2.
Do not use PG2 functions, such as type-C DDIs.
DMC will dynamically control PG1, PGA, PG2, PGB.
"""
Accordingly prevent DC states if PW2 (aka PG2) is enabled for any other
functionality.
Bpsec: 49193
Fixes: 88c4879384 ("drm/i915: Use separate "DC off" power well for ADL-P and DG2")
Reported-by: Kai Vehmanen <kai.vehmanen@intel.com>
Tested-by: Ambica Pramod <ambica.pramod@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230606172822.1891897-1-imre.deak@intel.com
(cherry picked from commit f4e498eb12)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Remove a few hidden compound_head() calls by converting the returned page
to a folio once and using the folio APIs.
Link: https://lkml.kernel.org/r/20230621164557.3510324-6-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Remove a few hidden compound_head() calls by converting the returned page
to a folio once and using the folio APIs. We also only increment the
refcount on the folio once instead of once for each page. Ideally, we
would have a for_each_sgt_folio macro, but until then this will do.
Link: https://lkml.kernel.org/r/20230621164557.3510324-5-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It is proved that insufficient LC_L1_INACTIVITY setting can cause audio
noise on some platform. With the LC_L1_INACTIVITY increased to 4ms, the
issue can be resolved.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along the following:
- DCN314 fixes
- DCN32x fixes
- New fast update sequence enablement
- DC mode clock switching enablement for DCN32x
- DP link loss fix
- New debugfs entry to set MST link settings
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- DC mode clock switch interface was previously only executed
for DCN303. Enable it for DCN32x so that the interface is called
correctly
- Assign function pointers for DCN32x that are used in the dc mode
interface
- Update the dc mode interface to work generically for each ASIC
- In update_clocks, make sure to consider softmax if we're in DC mode
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We don't check 128b132b-specific bits in LANE_ALIGN_STATUS_UPDATED DPCD
registers when parsing link loss status, which can cause us to miss a
link loss notification from some sinks.
[How]
Add a 128b132b-specific status bit check.
Cc: stable@vger.kernel.org # 6.3+
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Correct setting is div by 2 for odm. Seamless odm transitions
are enabled with enable_dp_dig_pixel_rate_div_policy debug flag.
Fixes: a2c7356f52 ("drm/amd/display: fix pixel rate update sequence")
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When using debugfs to change MST link settings, we need to wait until
the next stream update to apply the preferred link setting. So, trigger
a hotplug event right after the preferred link setting is applied.
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Having seamless boot on while forcing debug option ODM combine 2 to 1
will cause some corruptions because of some missing programmings.
Cc: stable@vger.kernel.org # 6.1+
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Leo Chen <sancchen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Why:
Limiting clocks to DC mode max results in some
display modes to no longer be supported
How:
Disable the path that limits the clock values
Fixes: 3b718dcaf1 ("drm/amd/display: Filter out AC mode frequencies on DC mode systems")
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The new fast update sequence is now supported on some ASICs. So, enable
it by default for all applicable ASICs.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clear update flags so the next flip does not have any redundant
programming (if a subsequent flip does not have a stream or plane
update, the update flags are not cleared).
Fixes: 0baae62463 ("drm/amd/display: Refactor fast update to use new HWSS build sequence")
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Condition for programming manually trigger used the wrong pipe (always
used top pipe instead of the one we are iterating through).
Fixes: 0baae62463 ("drm/amd/display: Refactor fast update to use new HWSS build sequence")
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We are currently missing some ABM registers.
[How]
Add the missing registers to dce_abm.h.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Reviewed-by: Chris Park <chris.park@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Sridevi Arvindekar <sridevi.arvindekar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Why:
Certain display configs resulted in underflow
How:
Add an entry containing all max DC clock timings
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
We have to check if stream is properly initialized before calling
find_matching_pll(), otherwise we might end up trying to deferecence a
NULL pointer.
Cc: stable@vger.kernel.org # 6.1+
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Sung-huai Wang <danny.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This partially reverts commit de231189e7 ("drm/amd/display: Fix
possible underflow for displays with large vblank").
[Why]
The increased value of VBlankNomDefaultUS causes underflow at the
desktop of an IP KVM setup
[How]
Change the value from 800 back to 668
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit e383b12709.
Controling hubp power gating using the DMCUB isn't stable so we
are reverting this change to move control back into the driver.
Cc: stable@vger.kernel.org # 6.3+
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
RCO is causing error messages on some DCN314 systems
[How]
Force disable RCO for DCN314
Fixes: 17fbdbda9c ("drm/amd/display: Enable dcn314 DPP RCO")
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Power gating is causing error messages on some DCN314 systems
[How]
Force disable power gating for DCN314
Fixes: 4cc1cebe08 ("drm/amd/display: Re-enable DPP/HUBP Power Gating")
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For SRIOV VF, no TMR needed.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Zhigang Luo <Zhigang.Luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After commit 8020f0f931 ("drm/amd/amdgpu: enable W=1 for amdgpu"),
there is an instance of -Wunused-const-variable when CONFIG_DEBUG_FS is
disabled:
drivers/gpu/drm/amd/amdgpu/../pm/amdgpu_pm.c:38:34: error: unused variable 'clocks' [-Werror,-Wunused-const-variable]
38 | static const struct cg_flag_name clocks[] = {
| ^
1 error generated.
clocks is only used when CONFIG_DEBUG_FS is set, so move the definition
into the CONFIG_DEBUG_FS block right above its only usage to clear up
the warning.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Also, correct the comment for NAVI10_PCIE__LC_L1_INACTIVITY_TBT_DEFAULT
as 0x0000000E stands for 400ms instead of 4ms.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Per VM BOs must be marked as moved or otherwise their ranges are not
updated on use which might be necessary when the replace operation
splits mappings.
This fixes random GPU hangs when replacing sparse mappings from the
userspace, while OP_MAP/OP_UNMAP works fine because always valid BOs
are correctly handled there.
Cc: stable@vger.kernel.org
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This flag determines whether the host possesses coherent access to
the memory of the device.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not all devices carry VBIOS version information. Add the device
attribute only if supported.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
LPDDR5 channels are 32 bit rather than 64, report the width properly
in the log.
v2: Only LPDDR5 are 32 bits per channel. DDR5 is 64 bits per channel
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2468
Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After commit 8020f0f931 ("drm/amd/amdgpu: enable W=1 for amdgpu"),
there is an instance of -Wunused-const-variable when CONFIG_DEBUG_FS is
disabled:
drivers/gpu/drm/amd/amdgpu/amdgpu_rap.c:110:37: error: unused variable 'amdgpu_rap_debugfs_ops' [-Werror,-Wunused-const-variable]
110 | static const struct file_operations amdgpu_rap_debugfs_ops = {
| ^
1 error generated.
There is no reason for the body of this function to be guarded when
CONFIG_DEBUG_FS is disabled, as debugfs_create_file() is a stub that
just returns an error pointer in that situation. Remove the preprocessor
guards so that the variable never appears unused, while not changing
anything at run time.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix the following coccicheck warning:
drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c:1657:14-18: Unneeded variable: "size".
Signed-off-by: Mingtong Bao <baomingtong001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Its value is required for finding the memory id of xcp.
Fixes: d26ea1b346 ("drm/amdgpu: Add xcp manager num_xcp_per_mem_partition")
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only low priority rings are using chunks to save the offset.
Bypass the mark offset callings from high priority rings.
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Identify issues that arise by using the tests/doubletest.cocci
semantic patch. Need to remove duplicate expression in if statement.
Signed-off-by: Wang Ming <machel@vivo.com>
Reviewed-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
I've been experiencing some intermittent crashes down in the display
driver code. The symptoms are ususally a line like this in dmesg:
amdgpu 0000:30:00.0: [drm] Failed to create MST payload for port 000000006d3a3885: -5
...followed by an Oops due to a NULL pointer dereference.
Switch to using mgr->dev instead of state->dev since "state" can be
NULL in some cases.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2184855
Suggested-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230419112447.18471-1-jlayton@kernel.org
The mmap_offset_attach() function returns error pointers, it doesn't
return NULL.
Fixes: eaee1c0858 ("drm/i915: Add a function to mmap framebuffer obj")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZH7tHLRZ9oBjedjN@moroto
(cherry picked from commit 3a89311387)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
The function is only defined if CONFIG_PROC_FS is enabled:
ld.lld: error: undefined symbol: i915_drm_client_fdinfo
>>> referenced by i915_driver.c
>>> drivers/gpu/drm/i915/i915_driver.o:(i915_drm_driver) in archive vmlinux.a
Use the PTR_IF() helper to make the reference NULL otherwise.
Fixes: e894b724c3 ("drm/i915: Use the fdinfo helper")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230616093158.3568480-1-arnd@kernel.org
(cherry picked from commit 8084c63743)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Smatch warns:
drivers/gpu/drm/i915/gt/uc/intel_huc.c:388
intel_huc_init() warn: missing error code 'err'
When the allocation of VMAs fail: The value of err is zero at this
point and it is passed to PTR_ERR and also finally returning zero which
is success instead of failure.
Fix this by adding the missing error code when VMA allocation fails.
Fixes: 08872cb13a ("drm/i915/mtl/huc: auth HuC via GSC")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230614223646.2583633-1-daniele.ceraolospurio@intel.com
(cherry picked from commit ce432fd34c)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Ensure intel_gsc_uc_fw_init_done and intel_gsc_uc_fw_proxy_init
takes a wakeref before reading GSC Shim registers.
NOTE: another patch in review also adds a call from selftest to
this same function. (https://patchwork.freedesktop.org/series/117713/)
which is why i am adding the wakeref inside the callee, not the
caller.
v2: - add a helper, 'gsc_uc_get_fw_status' for both callers
(Daniele Ceraolo)
Fixes: 99afb7cc8c ("drm/i915/pxp: Add ARB session creation and cleanup")
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230608230716.3079594-1-alan.previn.teres.alexis@intel.com
(cherry picked from commit 8c33c3755b)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Convert all instances of direct pte_t* dereferencing to instead use
ptep_get() helper. This means that by default, the accesses change from a
C dereference to a READ_ONCE(). This is technically the correct thing to
do since where pgtables are modified by HW (for access/dirty) they are
volatile and therefore we should always ensure READ_ONCE() semantics.
But more importantly, by always using the helper, it can be overridden by
the architecture to fully encapsulate the contents of the pte. Arch code
is deliberately not converted, as the arch code knows best. It is
intended that arch code (arm64) will override the default with its own
implementation that can (e.g.) hide certain bits from the core code, or
determine young/dirty status by mixing in state from another source.
Conversion was done using Coccinelle:
----
// $ make coccicheck \
// COCCI=ptepget.cocci \
// SPFLAGS="--include-headers" \
// MODE=patch
virtual patch
@ depends on patch @
pte_t *v;
@@
- *v
+ ptep_get(v)
----
Then reviewed and hand-edited to avoid multiple unnecessary calls to
ptep_get(), instead opting to store the result of a single call in a
variable, where it is correct to do so. This aims to negate any cost of
READ_ONCE() and will benefit arch-overrides that may be more complex.
Included is a fix for an issue in an earlier version of this patch that
was pointed out by kernel test robot. The issue arose because config
MMU=n elides definition of the ptep helper functions, including
ptep_get(). HUGETLB_PAGE=n configs still define a simple
huge_ptep_clear_flush() for linking purposes, which dereferences the ptep.
So when both configs are disabled, this caused a build error because
ptep_get() is not defined. Fix by continuing to do a direct dereference
when MMU=n. This is safe because for this config the arch code cannot be
trying to virtualize the ptes because none of the ptep helpers are
defined.
Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Updates for v6.5.. this includes a backmerg of drm-next tree to be able
to use new DRM DSC helpers.
Core:
+ Add Marijn Suijten as drm/msm reviewer
+ Adreno A660 bindings
+ SM8350 MDSS bindings fix
+ Fix adreno_is_a690() warnings
+ More generic (DRM) and MSM-specific DSC helpers
DP:
+ Removed obsolete USB-PD remains
+ Documented DP compatible string for sm8550 platform
DPU:
+ Enable missing features (DSPP, DSC, split display) on sc8180x,
sc8280xp, sm8450
+ Enabled writeback on sc7280
+ Implemented tearcheck support to support vsync on SM150 and
newer platforms
+ Native HDMI output support
+ Dropped unused features: regdma, GC, IGC
+ Fixed the DSC flush operations
+ Simplified QoS handling, removing obsolete and unused features
and merging SSPP and WB code paths
+ Reworked dpu_encoder initialisation path
+ Enabled DSPP support on sdm845
+ Disabled color-management if DSPP blocks are not available
+ Added support for DSC 1.2 blocks found on sm8350 and later
+ Added .fb_dirty to fix CMD panels
DSI:
+ Drop powerup quirks in favour of using pre_enable_prev_first for
downstream bridges
+ Fixed 14nm DSI PHY programming
+ Added support for DSI and 28nm DSI PHY on MSM8226 platform
+ Make use of DRM and MSM DSC helpers
MDP5:
+ Added support for display controller on MSM8226 platform
GPU:
+ A690 support
+ Don't set IO_PGTABLE_QUIRK_ARM_OUTER_WBWA on devices with coherent SMMU
(like A690)
+ Move cmdstream dumping out of fence signaling path
+ Cleanups
+ Support for a6xx devices without GMU (aka "GMU wrapper"
+ a610 support
+ a619_holi support (a619 variant without GMU)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsUB=tRB4nR6ZCJMuLhro5zN3BQWUSywVYbaipqqDZ_cQ@mail.gmail.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmSPcdMeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGWrQH/3KmuvZsWMC4PpJY
VcF9VfF9i+Zv7DoG8sjD5VpNh47e87RsR6WNOFnKol5SUrM6vsBAb5i2rfQahNIv
NSj0fPCE4/Nj9LMecKVC9WD8CitxYdbR+CF9Is21AQj1VihUl9eHXGcAWxuaMyhk
TjPUwmbOOsRVMXXdGJzjX78cvLsxqpSv8A/5OTh16IBimbh7p+YjKJFkbfj/PMWf
aF1quFkIEXgzJcHCpP6KDZHr2KbpY+jIN9hUENnGKJxHYNso5u+KrIW1kAm8meP1
x26ETSquM0T70OAzovOWg+BeVkLDac/3Rh30ztLAI4AtajrlSzycvFsU9UNEJCc2
BnM2IZI=
=ANT5
-----END PGP SIGNATURE-----
Backmerge tag 'v6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next
Linux 6.4-rc7
Need this to pull in the msm work.
Signed-off-by: Dave Airlie <airlied@redhat.com>
A610 is implemented on at least three SoCs: SM6115 (bengal), SM6125
(trinket) and SM6225 (khaje). Trinket does not support speed binning
(only a single SKU exists) and we don't yet support khaje upstream.
Hence, add a fuse mapping table for bengal to allow for per-chip
frequency limiting.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542780/
Signed-off-by: Rob Clark <robdclark@chromium.org>
A619_holi is implemented on at least two SoCs: SM4350 (holi) and SM6375
(blair). This is what seems to be a first occurrence of this happening,
but it's easy to overcome by guarding the SoC-specific fuse values with
of_machine_is_compatible(). Do just that to enable frequency limiting
on these SoCs.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542772/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Before transitioning to using per-SoC and not per-Adreno speedbin
fuse values (need another patchset to land elsewhere), a good
improvement/stopgap solution is to use adreno_is_aXYZ macros in
place of explicit revision matching. Do so to allow differentiating
between A619 and A619_holi.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542777/
Signed-off-by: Rob Clark <robdclark@chromium.org>
The GPU can only be one at a time. Turn a series of ifs into if +
elseifs to save some CPU cycles.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542770/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Adreno 619 expects some tunables to be set differently. Make up for it.
Fixes: b7616b5c69 ("drm/msm/adreno: Add A619 support")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542782/
Signed-off-by: Rob Clark <robdclark@chromium.org>
A610 is one of (if not the) lowest-tier SKUs in the A6XX family. It
features no GMU, as it's implemented solely on SoCs with SMD_RPM.
What's more interesting is that it does not feature a VDDGX line
either, being powered solely by VDDCX and has an unfortunate hardware
quirk that makes its reset line broken - after a couple of assert/
deassert cycles, it will hang for good and will not wake up again.
This GPU requires mesa changes for proper rendering, and lots of them
at that. The command streams are quite far away from any other A6XX
GPU and hence it needs special care. This patch was validated both
by running an (incomplete) downstream mesa with some hacks (frames
rendered correctly, though some instructions made the GPU hangcheck
which is expected - garbage in, garbage out) and by replaying RD
traces captured with the downstream KGSL driver - no crashes there,
ever.
Add support for this GPU on the kernel side, which comes down to
pretty simply adding A612 HWCG tables, altering a few values and
adding a special case for handling the reset line.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542779/
Signed-off-by: Rob Clark <robdclark@chromium.org>
A619_holi is a GMU-less variant of the already-supported A619 GPU.
It's present on at least SM4350 (holi) and SM6375 (blair). No mesa
changes are required. Add the required kernel-side support for it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542775/
Signed-off-by: Rob Clark <robdclark@chromium.org>
A610 and A619_holi don't support the feature. Disable it to make the GPU stop
crashing after almost each and every submission - the received data on
the GPU end was simply incomplete in garbled, resulting in almost nothing
being executed properly. Extend the disablement to adreno_has_gmu_wrapper,
as none of the GMU wrapper Adrenos that don't support yet seem to feature it.
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542774/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Some (particularly SMD_RPM, a.k.a non-RPMh) SoCs implement A6XX GPUs
but don't implement the associated GMUs. This is due to the fact that
the GMU directly pokes at RPMh. Sadly, this means we have to take care
of enabling & scaling power rails, clocks and bandwidth ourselves.
Reuse existing Adreno-common code and modify the deeply-GMU-infused
A6XX code to facilitate these GPUs. This involves if-ing out lots
of GMU callbacks and introducing a new type of GMU - GMU wrapper (it's
the actual name that Qualcomm uses in their downstream kernels).
This is essentially a register region which is convenient to model
as a device. We'll use it for managing the GDSCs. The register
layout matches the actual GMU_CX/GX regions on the "real GMU" devices
and lets us reuse quite a bit of gmu_read/write/rmw calls.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542766/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Since the introduction of A6xx support, we've been enabling the CX GMU
power counter 0 in a bit of a weird spot. Move it to hw_init so that
GMU wrapper GPUs can reuse the same code paths. As a bonus, this order
makes it easier to compare mainline and downstream register access traces.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542765/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Rename lower_bit to hbb_lo and explain what it signifies.
Add explanations (wherever possible to other tunables).
Port setting min_access_length, ubwc_mode and hbb_hi from downstream.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542764/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Currently we're only deasserting REG_A6XX_RBBM_GBIF_HALT, but we also
need REG_A6XX_GBIF_HALT to be set to 0.
This is typically done automatically on successful GX collapse, but in
case that fails, we should take care of it.
Also, add a memory barrier to ensure it's gone through before jumping
to further initialization.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542760/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Introduce a6xx_gpu_sw_reset() in preparation for adding GMU wrapper
GPUs and reuse it in a6xx_gmu_force_off().
This helper, contrary to the original usage in GMU code paths, adds
a readback+delay sequence to ensure that the reset is never deasserted
too quickly due to e.g. OoO execution going crazy.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542758/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Unify the indentation and explain the cryptic 0xF value.
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542756/
Signed-off-by: Rob Clark <robdclark@chromium.org>
This function is responsible for telling the GPU to halt transactions
on all of its relevant buses, drain them and leave them in a predictable
state, so that the GPU can be e.g. reset cleanly.
Move the function to a6xx_gpu.c, remove the static keyword and add a
prototype in a6xx_gpu.h to accomodate for the move.
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542762/
Signed-off-by: Rob Clark <robdclark@chromium.org>
As pointed out by Akhil during the review process of GMU wrapper
introduction [1], it makes sense to move this write into the function
that's responsible for forcibly shutting the GMU off.
It is also very convenient to move this to GMU-specific code, so that
it does not have to be guarded by an if-condition to avoid calling it
on GMU wrapper targets.
Move the write to the aforementioned a6xx_gmu_force_off() to achieve
that. No effective functional change.
[1] https://lore.kernel.org/linux-arm-msm/20230501194022.GA18382@akhilpo-linux.qualcomm.com/
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542752/
Signed-off-by: Rob Clark <robdclark@chromium.org>
These two will be reused by at least A619_holi in the non-gmu
paths. Turn them non-static them to make it possible.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542751/
Signed-off-by: Rob Clark <robdclark@chromium.org>
The adreno_is_revn rework came at the same time as A690 introduction
and that resulted in it not covering all cases. Fix it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/542754/
Signed-off-by: Rob Clark <robdclark@chromium.org>
drm-misc-fixes maybe in time for v6.4-rc7:
- qaic leak and null deref fix.
- Fix runtime pm in nouveau.
- Fix array overflow in ti-sn65dsi86 pwm chip handling.
- Assorted null check fixes in nouveau.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <dev@lankhorst.se>
Link: https://patchwork.freedesktop.org/patch/msgid/641eb8a8-fbd7-90ad-0805-310b7fec9344@lankhorst.se
During IRQ conversion we have lost the PP_DONE interrupts for sc7280
platform. This was left unnoticed, because this interrupt is only used
for CMD outputs and probably no sc7[12]80 systems use DSI CMD panels.
Fixes: 667e9985ee ("drm/msm/dpu: replace IRQ lookup with the data in hw catalog")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/542175/
Link: https://lore.kernel.org/r/20230613001004.3426676-2-dmitry.baryshkov@linaro.org
This seems to have existed for ever but is now more apparant after
commit 9bff18d134 ("drm/ttm: use per BO cleanup workers")
My analysis: two threads are running, one in the irq signalling the
fence, in dma_fence_signal_timestamp_locked, it has done the
DMA_FENCE_FLAG_SIGNALLED_BIT setting, but hasn't yet reached the
callbacks.
The second thread in nouveau_cli_work_ready, where it sees the fence is
signalled, so then puts the fence, cleanups the object and frees the
work item, which contains the callback.
Thread one goes again and tries to call the callback and causes the
use-after-free.
Proposed fix: lock the fence signalled check in nouveau_cli_work_ready,
so either the callbacks are done or the memory is freed.
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Fixes: 11e451e740 ("drm/nouveau: remove fence wait code from deferred client work handler")
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://lore.kernel.org/dri-devel/20230615024008.1600281-1-airlied@gmail.com/
drm/i915 feature pull #2 for v6.5:
Features and functionality:
- Meteorlake PM demand (Vinod, Mika)
- Switch to dedicated workqueues to stop using flush_scheduled_work() (Luca)
Refactoring and cleanups:
- Move display runtime init under display/ (Matt)
- Async flip error message clarifications (Arun)
Fixes:
- Remove 10bit gamma on desktop gen3 parts, they don't support it (Ville)
- Fix driver probe error handling if driver creation fails (Matt)
- Fix all -Wunused-but-set-variable warnings, and enable it for i915 (Jani)
- Stop using edid_blob_ptr (Jani)
- Fix log level for "CDS interlane align done" (Khaled)
- Fix an unnecessary include prefix (Matt)
Merges:
- Backmerge drm-next to sync with drm-intel-gt-next (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87o7lnpxz2.fsf@intel.com
[Why]
The sequence for collecting down_reply from source perspective should
be:
Request_n->repeat (get partial reply of Request_n->clear message ready
flag to ack DPRX that the message is received) till all partial
replies for Request_n are received->new Request_n+1.
Now there is chance that drm_dp_mst_hpd_irq() will fire new down
request in the tx queue when the down reply is incomplete. Source is
restricted to generate interveleaved message transactions so we should
avoid it.
Also, while assembling partial reply packets, reading out DPCD DOWN_REP
Sideband MSG buffer + clearing DOWN_REP_MSG_RDY flag should be
wrapped up as a complete operation for reading out a reply packet.
Kicking off a new request before clearing DOWN_REP_MSG_RDY flag might
be risky. e.g. If the reply of the new request has overwritten the
DPRX DOWN_REP Sideband MSG buffer before source writing one to clear
DOWN_REP_MSG_RDY flag, source then unintentionally flushes the reply
for the new request. Should handle the up request in the same way.
[How]
Separete drm_dp_mst_hpd_irq() into 2 steps. After acking the MST IRQ
event, driver calls drm_dp_mst_hpd_irq_send_new_request() and might
trigger drm_dp_mst_kick_tx() only when there is no on going message
transaction.
Changes since v1:
* Reworked on review comments received
-> Adjust the fix to let driver explicitly kick off new down request
when mst irq event is handled and acked
-> Adjust the commit message
Changes since v2:
* Adjust the commit message
* Adjust the naming of the divided 2 functions and add a new input
parameter "ack".
* Adjust code flow as per review comments.
Changes since v3:
* Update the function description of drm_dp_mst_hpd_irq_handle_event
Changes since v4:
* Change ack of drm_dp_mst_hpd_irq_handle_event() to be an array align
the size of esi[]
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If hmm_range_fault returns -EBUSY, we should call hmm_range_fault again
to validate the remaining pages. On one system with NUMA auto balancing
enabled, hmm_range_fault takes 6 seconds for 1GB range because CPU
migrate the range one page at a time. To be safe, increase timeout value
to 1 second for 128MB range.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To extend UTCL2 reach.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set compute partition mode interface in NBIO is no longer used. Remove
the only implementation from NBIO v7.9
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update user space last_event_age when event age is enabled.
It is only for KFD_EVENT_TYPE_SIGNAL which is checked by user space.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set waiter's activated flag true when event age unmatchs with last_event_age.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add event_age tracking when receiving interrupt.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
drm_sched_entity_add_dependency_cb ignores the scheduled fence and return false.
If entity's dependency is a scheduler error fence and drm_sched_stop is called
due to TDR, drm_sched_entity_pop_job will wait for the dependency infinitely.
[How]
Do not wait or ignore the scheduled error fence, add drm_sched_entity_wakeup
callback for the dependency with scheduled error fence.
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
UMD is not aware of entity error, and will keep submitting jobs
into the error entity.
[How]
Add entity error check when getting entity from ctx.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of using the VRAM lost counter add a 64bit token which indicates
if a context or job is still valid to use.
Should the VRAM be lost or the page tables need re-creation the token will
change indicating that userspace needs to act and re-create the contexts
and re-submit the work.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When some problem with the updates of page tables is detected reset the
state machine of the VM and re-create all page tables from scratch.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Forward errors from previous submissions to this one.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set the fence error code before trying to soft-recover it.
It gets overwritten when a hard recovery is required.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When we force complete fences we should mark them as canceled.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows us to insert some error codes into the bottom of the pipeline
on an engine.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mark as experimental for now until we get closer to production
to avoid possible undesireable behavior when mixing newer
boards with older kernels.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use PSP firmware interface for switching compute partitions.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PARTITION_MODE field in PARTITION_COMPUTE_STATUS register is defined as
below by firmware.
SPX = 0, DPX = 1, TPX = 2, QPX = 3, CPX = 4
Change driver definition accordingly.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's perfectly possible that the BO is about to be destroyed and doesn't
have a backing store associated with it.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Guchun Chen <guchun.chen@amd.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cong Yang