make[2]: *** No rule to make target 'install'. Stop.
make[1]: *** [Makefile:122: runqslower_install] Error 2
make: *** [Makefile:116: bpf_install] Error 2
There is no rule for target 'install' in tools/bpf/runqslower/Makefile,
and there is no need to install it, so just remove 'runqslower_install'.
Fixes: 9c01546d26 ("tools/bpf: Add runqslower tool to tools/bpf")
Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210628030409.3459095-1-liwei391@huawei.com
The new resolve_btfids tool did not clean up the feature detection folder
on 'make clean', and also was not called properly from the clean rule in
tools/make/ folder on its 'make clean'. This lead to stale objects being
left around, which could cause feature detection to fail on subsequent
builds.
Fixes: fbbb68de80 ("bpf: Add resolve_btfids tool to resolve BTF IDs in ELF object")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/bpf/20200901144343.179552-1-toke@redhat.com
Pull networking updates from David Miller:
1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan.
2) Support UDP segmentation in code TSO code, from Eric Dumazet.
3) Allow flashing different flash images in cxgb4 driver, from Vishal
Kulkarni.
4) Add drop frames counter and flow status to tc flower offloading,
from Po Liu.
5) Support n-tuple filters in cxgb4, from Vishal Kulkarni.
6) Various new indirect call avoidance, from Eric Dumazet and Brian
Vazquez.
7) Fix BPF verifier failures on 32-bit pointer arithmetic, from
Yonghong Song.
8) Support querying and setting hardware address of a port function via
devlink, use this in mlx5, from Parav Pandit.
9) Support hw ipsec offload on bonding slaves, from Jarod Wilson.
10) Switch qca8k driver over to phylink, from Jonathan McDowell.
11) In bpftool, show list of processes holding BPF FD references to
maps, programs, links, and btf objects. From Andrii Nakryiko.
12) Several conversions over to generic power management, from Vaibhav
Gupta.
13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry
Yakunin.
14) Various https url conversions, from Alexander A. Klimov.
15) Timestamping and PHC support for mscc PHY driver, from Antoine
Tenart.
16) Support bpf iterating over tcp and udp sockets, from Yonghong Song.
17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov.
18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan.
19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several
drivers. From Luc Van Oostenryck.
20) XDP support for xen-netfront, from Denis Kirjanov.
21) Support receive buffer autotuning in MPTCP, from Florian Westphal.
22) Support EF100 chip in sfc driver, from Edward Cree.
23) Add XDP support to mvpp2 driver, from Matteo Croce.
24) Support MPTCP in sock_diag, from Paolo Abeni.
25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic
infrastructure, from Jakub Kicinski.
26) Several pci_ --> dma_ API conversions, from Christophe JAILLET.
27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel.
28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki.
29) Refactor a lot of networking socket option handling code in order to
avoid set_fs() calls, from Christoph Hellwig.
30) Add rfc4884 support to icmp code, from Willem de Bruijn.
31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei.
32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin.
33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin.
34) Support TCP syncookies in MPTCP, from Flowian Westphal.
35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano
Brivio.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits)
net: thunderx: initialize VF's mailbox mutex before first usage
usb: hso: remove bogus check for EINPROGRESS
usb: hso: no complaint about kmalloc failure
hso: fix bailout in error case of probe
ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM
selftests/net: relax cpu affinity requirement in msg_zerocopy test
mptcp: be careful on subflow creation
selftests: rtnetlink: make kci_test_encap() return sub-test result
selftests: rtnetlink: correct the final return value for the test
net: dsa: sja1105: use detected device id instead of DT one on mismatch
tipc: set ub->ifindex for local ipv6 address
ipv6: add ipv6_dev_find()
net: openvswitch: silence suspicious RCU usage warning
Revert "vxlan: fix tos value before xmit"
ptp: only allow phase values lower than 1 period
farsync: switch from 'pci_' to 'dma_' API
wan: wanxl: switch from 'pci_' to 'dma_' API
hv_netvsc: do not use VF device if link is down
dpaa2-eth: Fix passing zero to 'PTR_ERR' warning
net: macb: Properly handle phylink on at91sam9x
...
Pulling header files directly out of the kernel sources for inclusion in
userspace programs is highly error prone, not least because it bypasses
the kbuild infrastructure entirely and so may end up referencing other
header files that have not been generated.
Subsequent patches will cause compiler.h to pull in the ungenerated
asm/rwonce.h file via filter.h, breaking the build for tools/bpf:
| $ make -C tools/bpf
| make: Entering directory '/linux/tools/bpf'
| CC bpf_jit_disasm.o
| LINK bpf_jit_disasm
| CC bpf_dbg.o
| In file included from /linux/include/uapi/linux/filter.h:9,
| from /linux/tools/bpf/bpf_dbg.c:41:
| /linux/include/linux/compiler.h:247:10: fatal error: asm/rwonce.h: No such file or directory
| #include <asm/rwonce.h>
| ^~~~~~~~~~~~~~
| compilation terminated.
| make: *** [Makefile:61: bpf_dbg.o] Error 1
| make: Leaving directory '/linux/tools/bpf'
Take a copy of the installed version of linux/filter.h (i.e. the one
created by the 'headers_install' target) into tools/include/uapi/linux/
and adjust the BPF tool Makefile to reference the local include
directories instead of those in the main source tree.
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Reported-by: Xiao Yang <ice_yangxiao@163.com>
Signed-off-by: Will Deacon <will@kernel.org>
The resolve_btfids tool will be used during the vmlinux linking,
so it's necessary it's ready for it.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200711215329.41165-3-jolsa@kernel.org
This allows transparent cross-compilation with CROSS_COMPILE by
relying on 7ed1c1901f ("tools: fix cross-compile var clobbering").
Same change was applied to tools/bpf/bpftool/Makefile in
9e88b9312a ("tools: bpftool: do not force gcc as CC").
Signed-off-by: Brett Mastbergen <brett.mastbergen@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200609213506.3299-1-brett.mastbergen@gmail.com
When using make kselftest TARGETS=bpf, tools/bpf is built with
MAKEFLAGS=rR, which causes $(COMPILE.c) to be undefined, which in turn
causes the build to fail with
CC kselftest/bpf/tools/build/bpftool/map_perf_ring.o
/bin/sh: 1: -MMD: not found
Fix by using $(CC) $(CFLAGS) -c instead of $(COMPILE.c).
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200602175649.2501580-2-iii@linux.ibm.com
Convert one of BCC tools (runqslower [0]) to BPF CO-RE + libbpf. It matches
its BCC-based counterpart 1-to-1, supporting all the same parameters and
functionality.
runqslower tool utilizes BPF skeleton, auto-generated from BPF object file,
as well as memory-mapped interface to global (read-only, in this case) data.
Its Makefile also ensures auto-generation of "relocatable" vmlinux.h, which is
necessary for BTF-typed raw tracepoints with direct memory access.
[0] 11bf5d02c8/tools/runqslower.py
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200113073143.1779940-6-andriin@fb.com
Building selftests with 'make TARGETS=bpf kselftest' was fixed in commit
55d554f5d1 ("tools: bpf: Use !building_out_of_srctree to determine
srctree"). However, by updating $(srctree) in tools/bpf/Makefile for
in-tree builds only, we leave out the case where we pass an output
directory to build BPF tools, but $(srctree) is not set. This
typically happens for:
$ make -s tools/bpf O=/tmp/foo
Makefile:40: /tools/build/Makefile.feature: No such file or directory
Fix it by updating $(srctree) in the Makefile not only for out-of-tree
builds, but also if $(srctree) is empty.
Detected with test_bpftool_build.sh.
Fixes: 55d554f5d1 ("tools: bpf: Use !building_out_of_srctree to determine srctree")
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Link: https://lore.kernel.org/bpf/20191119105626.21453-1-quentin.monnet@netronome.com
make TARGETS=bpf kselftest fails with:
Makefile:127: tools/build/Makefile.include: No such file or directory
When the bpf tool make is invoked from tools Makefile, srctree is
cleared and the current logic check for srctree equals to empty
string to determine srctree location from CURDIR.
When the build in invoked from selftests/bpf Makefile, the srctree
is set to "." and the same logic used for srctree equals to empty is
needed to determine srctree.
Check building_out_of_srctree undefined as the condition for both
cases to fix "make TARGETS=bpf kselftest" build failure.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20190927011344.4695-1-skhan@linuxfoundation.org
When building "tools/bpf" from the top of the Linux repository, the
build system passes a value for the $(OUTPUT) Makefile variable to
tools/bpf/Makefile and tools/bpf/bpftool/Makefile, which results in
generating "libbpf/" (for bpftool) and "feature/" (bpf and bpftool)
directories inside the tree.
This commit adds such directories to the relevant .gitignore files, and
edits the Makefiles to ensure they are removed on "make clean". The use
of "rm" is also made consistent throughout those Makefiles (relies on
the $(RM) variable, use "--" to prevent interpreting
$(OUTPUT)/$(DESTDIR) as options.
v2:
- New patch.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Fix build error found with Ubuntu shipped gcc-5
~/git/bpf/tools/bpf$ make all
Auto-detecting system features:
... libbfd: [ OFF ]
... disassembler-four-args: [ OFF ]
CC bpf_jit_disasm.o
LINK bpf_jit_disasm
CC bpf_dbg.o
/home/john/git/bpf/tools/bpf/bpf_dbg.c: In function ‘cmd_load’:
/home/john/git/bpf/tools/bpf/bpf_dbg.c:1077:13: warning: ‘cont’ may be used uninitialized in this function [-Wmaybe-uninitialized]
} else if (matches(subcmd, "pcap") == 0) {
^
LINK bpf_dbg
CC bpf_asm.o
make: *** No rule to make target `bpf_exp.yacc.o', needed by `bpf_asm'. Stop.
Fixes: 5a8997f207 ("tools: bpf: respect output directory during build")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
bpf tools use feature detection for libbfd dependency, clean up
the output files on make clean.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
There is no FORCE target in the Makefile and some of the PHONY
targets are missing, update the list.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Even in quiet mode, make finishes with
rm tools/bpf/bpf_exp.lex.c
That's because it considers the file to be intermediate. Silence that by
mentioning the lex.c file instead of the lex.o file; the dependency still
stays.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Default to quiet build, with V=1 enabling verbose build as is usual.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Use the descend macro to properly propagate $(subdir) to bpftool.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Make the 'install' target depend on the 'all' target to build the binaries
first.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Currently, make bpf_install in tools/ does not respect DESTDIR. Moreover, it
installs to /usr/bin/ unconditionally.
Let it respect DESTDIR and allow prefix to be specified. Also, to be more
consistent with bpftool and with the usual customs, default the prefix to
/usr/local instead of /usr.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Currently, the programs under tools/bpf (with the notable exception of
bpftool) do not respect the output directory (make O=dir). Fix that.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Bpftool build is broken with binutils version 2.29 and later.
The cause is commit 003ca0fd2286 ("Refactor disassembler selection")
in the binutils repo, which changed the disassembler() function
signature.
Fix this by adding a new "feature" to the tools/build/features
infrastructure and make it responsible for decision which
disassembler() function signature to use.
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Files removed in 'net-next' had their license header updated
in 'net'. We take the remove from 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a simple tool for querying and updating BPF objects on the system.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We currently only have BPF tools in the tools/net directory.
We are about to add more BPF tools there, not necessarily
networking related, rename the directory and related Makefile
targets to bpf.
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Li