This provides a KUNIT test suite for the VCAP APIs encoding functionality.
The test can be run by adding these settings in a .kunitconfig file
CONFIG_KUNIT=y
CONFIG_NET=y
CONFIG_VCAP_KUNIT_TEST=y
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This provides a test VCAP model for use in a KUNIT test. The model
provides 3 different VCAP types for better test coverage.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds rule encoding functionality to the VCAP API.
A rule consists of keys and actions in separate cache sections.
The maximum size of the keyset or actionset determines the size of the
rule.
The VCAP hardware need to be able to distinguish different rule sizes from
each other, and for that purpose some extra typegroup bits are added to the
rule when it is encoded.
The API provides a bit stream iterator that allows highlevel encoding
functionality to add key and action value bits independent of typegroup
bits.
This is handled by letting the concrete VCAP model provide the typegroup
table for the different rule sizes.
After the key and action values have been added to the encoding bit streams
the typegroup bits are set to their correct values just before the rule is
written to the VCAP hardware.
The key and action offsets provided in the VCAP model are the offset before
adding the typegroup bits.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Tested-by: Casper Andersson <casper.casan@gmail.com>
Reviewed-by: Casper Andersson <casper.casan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This provides most of the rule handling needed to add a new rule to a VCAP.
To add a rule a client must follow these steps:
1) Allocate a new rule (provide an id or get one automatically assigned)
2) Add keys to the rule
3) Add actions to the rule
4) Optionally set a keyset on the rule
5) Optionally set an actionset on the rule
6) Validate the rule (this will add keyset and actionset if not specified
in the previous steps)
7) Add the rule (if the validation was successful)
8) Free the rule instance (a copy has been added to the VCAP)
The validation step will fail if there are no keysets with the requested
keys, or there are no actionsets with the requested actions.
The validation will also fail if the keyset is not configured for the port
for the requested protocol).
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Tested-by: Casper Andersson <casper.casan@gmail.com>
Reviewed-by: Casper Andersson <casper.casan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This provides a default port keyset configuration for the Sparx5 IS2 VCAP
where all ports and all lookups in IS2 use the same keyset (MAC_ETYPE) for
all types of traffic.
This means that no matter what frame type is received on any front port it
will generate the MAC_ETYPE keyset in the IS VCAP and any rule in the IS2
VCAP that uses this keyset will be matched against the keys in the
MAC_ETYPE keyset.
The callback interface used by the VCAP API is populated with Sparx5
specific handler functions that takes care of the actual reading and
writing to data to the Sparx5 IS2 VCAP instance.
A few functions are also added to the VCAP API to support addition of rule
fields such as the ingress port mask and the lookup bit.
The IS2 VCAP in Sparx5 is really divided in two instances with lookup 0
and 1 in the first instance and lookup 2 and 3 in the second instance.
The lookup bit selects lookup 0 or 3 in the respective instance when it is
set.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Tested-by: Casper Andersson <casper.casan@gmail.com>
Reviewed-by: Casper Andersson <casper.casan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds initial TC flower filter support to Sparx5 for the IS2 VCAP.
The support consists of the source and destination MAC addresses,
and the trap and pass actions.
This is how you can create a rule that test the functionality:
tc qdisc add dev eth0 clsact
tc filter add dev eth0 ingress chain 8000000 prio 10 handle 10 \
protocol all flower skip_sw \
dst_mac 0a:0b:0c:0d:0e:0f \
src_mac 2:0:0:0:0:1 \
action trap
The IS2 chains in Sparx5 are assigned like this:
- chain 8000000: IS2 Lookup 0
- chain 8100000: IS2 Lookup 1
- chain 8200000: IS2 Lookup 2
- chain 8300000: IS2 Lookup 3
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Tested-by: Casper Andersson <casper.casan@gmail.com>
Reviewed-by: Casper Andersson <casper.casan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds the register interface needed to access the Sparx5 Ingress Stage
2 VCAP (IS2).
The Sparx5 Chip Register Model can be browsed at this location:
https://github.com/microchip-ung/sparx-5_reginfo
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This provides the Sparx5 Ingress Stage 2 (IS2) model and adds it to the
VCAP control instance that will be provided to the VCAP API.
The Sparx5 IS2 C code model is generated from the Sparx5 RTL design model.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This provides the initial VCAP API framework and Sparx5 specific VCAP
implementation.
When the Sparx5 Switchdev driver is initialized it will also initialize its
VCAP module, and this hooks up the concrete Sparx5 VCAP model to the VCAP
API, so that the VCAP API knows what VCAP instances are available.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Support hardware offload when tunnel neigh out port is bond.
These feature work with the nfp firmware. If the firmware
supports the NFP_FL_FEATS_TUNNEL_NEIGH_LAG feature, nfp driver
write the bond information to the firmware neighbor table or
do nothing for bond. when neighbor MAC changes, nfp driver
need to update the neighbor information too.
Signed-off-by: Yanguo Li <yanguo.li@corigine.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For apollolake the mapping between LEDs and GPIO pins was off because of
a refactoring when we introduced a new device model.
In addition to the reordering the indices in the lookup table need to be
updated as well.
Fixes: a97126265d ("leds: simatic-ipc-leds-gpio: add new model 227G")
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Link: https://lore.kernel.org/r/20221024092027.4529-1-henning.schild@siemens.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The mlx5e_macsec_cleanup() routine has NULL pointer dereferencing if mlx5
device doesn't support MACsec (priv->macsec will be NULL).
While at it delete comment line, assignment and extra blank lines, so fix
everything in one patch.
Fixes: 1f53da6764 ("net/mlx5e: Create advanced steering operation (ASO) object for MACsec")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit b0c07116c8 ("platform/x86: amd-pmc: Avoid reading SMU version at
probe time") adjusted the behavior for amd-pmc to avoid reading the SMU
version at startup but rather on first use to improve boot time.
However the SMU version is also used to decide whether to place a timer
based wakeup in the OS_HINT message. If the idlemask hasn't been read
before this message was sent then the SMU version will not have been
cached.
Ensure the SMU version has been read before deciding whether or not to
run this codepath.
Cc: stable@vger.kernel.org # 6.0
Reported-by: You-Sheng Yang <vicamo.yang@canonical.com>
Tested-by: Anson Tsao <anson.tsao@amd.com>
Fixes: b0c07116c8 ("platform/x86: amd-pmc: Avoid reading SMU version at probe time")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20221020113749.6621-2-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
NIC is stopped with rtnl_lock held, and during the stop it cancels the
'service_task' work and free irqs.
However, if CONFIG_MACSEC is set, rtnl_lock is acquired both from
aq_nic_service_task and aq_linkstate_threaded_isr. Then a deadlock
happens if aq_nic_stop tries to cancel/disable them when they've already
started their execution.
As the deadlock is caused by rtnl_lock, it causes many other processes
to stall, not only atlantic related stuff.
Fix it by introducing a mutex that protects each NIC's macsec related
data, and locking it instead of the rtnl_lock from the service task and
the threaded IRQ.
Before this patch, all macsec data was protected with rtnl_lock, but
maybe not all of it needs to be protected. With this new mutex, further
efforts can be made to limit the protected data only to that which
requires it. However, probably it doesn't worth it because all macsec's
data accesses are infrequent, and almost all are done from macsec_ops
or ethtool callbacks, called holding rtnl_lock, so macsec_mutex won't
never be much contended.
The issue appeared repeteadly attaching and deattaching the NIC to a
bond interface. Doing that after this patch I cannot reproduce the bug.
Fixes: 62c1c2e606 ("net: atlantic: MACSec offload skeleton")
Reported-by: Li Liang <liali@redhat.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
thinkpad_acpi was reporting 2 fans on a ThinkPad T14s gen 1, even though
the laptop has only 1 fan.
The second, not present fan always reads 65535 (-1 in 16 bit signed),
ignore fans which report 65535 to avoid reporting the non present fan.
Signed-off-by: Jelle van der Waa <jvanderwaa@redhat.com>
Link: https://lore.kernel.org/r/20221019194751.5392-1-jvanderwaa@redhat.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add quirk for ASUS ROG X16 Flow 2-in-1 to enable tablet mode with
lid flip (all screen rotations).
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20221010063009.32293-1-luke@ljones.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Back in 2014, the LQI was saved in the skb control buffer (skb->cb, or
mac_cb(skb)) without any actual reset of this area prior to its use.
As part of a useful rework of the use of this region, 32edc40ae6
("ieee802154: change _cb handling slightly") introduced mac_cb_init() to
basically memset the cb field to 0. In particular, this new function got
called at the beginning of mac802154_parse_frame_start(), right before
the location where the buffer got actually filled.
What went through unnoticed however, is the fact that the very first
helper called by device drivers in the receive path already used this
area to save the LQI value for later extraction. Resetting the cb field
"so late" led to systematically zeroing the LQI.
If we consider the reset of the cb field needed, we can make it as soon
as we get an skb from a device driver, right before storing the LQI,
as is the very first time we need to write something there.
Cc: stable@vger.kernel.org
Fixes: 32edc40ae6 ("ieee802154: change _cb handling slightly")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20221020142535.1038885-1-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Kuniyuki Iwashima says:
====================
inet6: Remove inet6_destroy_sock() calls.
This is a follow-up series for commit d38afeec26 ("tcp/udp: Call
inet6_destroy_sock() in IPv6 sk->sk_destruct().").
This series cleans up unnecessary inet6_destory_sock() calls in
sk->sk_prot->destroy() and call it from sk->sk_destruct() to make
sure we do not leak memory related to IPv6 specific-resources.
Changes:
v2:
* patch 1
* Fix build failure for CONFIG_MPTCP_IPV6=y
v1: https://lore.kernel.org/netdev/20221018190956.1308-1-kuniyu@amazon.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We can reuse the unlock label above and need not repeat the same code.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The last user of inet6_destroy_sock() is its wrapper inet6_cleanup_sock().
Let's rename inet6_destroy_sock() to inet6_cleanup_sock().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit d38afeec26 ("tcp/udp: Call inet6_destroy_sock()
in IPv6 sk->sk_destruct()."), we call inet6_destroy_sock() in
sk->sk_destruct() by setting inet6_sock_destruct() to it to make
sure we do not leak inet6-specific resources.
SCTP sets its own sk->sk_destruct() in the sctp_init_sock(), and
SCTPv6 socket reuses it as the init function.
To call inet6_sock_destruct() from SCTPv6 sk->sk_destruct(), we
set sctp_v6_destruct_sock() in a new init function.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit d38afeec26 ("tcp/udp: Call inet6_destroy_sock()
in IPv6 sk->sk_destruct()."), we call inet6_destroy_sock() in
sk->sk_destruct() by setting inet6_sock_destruct() to it to make
sure we do not leak inet6-specific resources.
DCCP sets its own sk->sk_destruct() in the dccp_init_sock(), and
DCCPv6 socket shares it by calling the same init function via
dccp_v6_init_sock().
To call inet6_sock_destruct() from DCCPv6 sk->sk_destruct(), we
export it and set dccp_v6_sk_destruct() in the init function.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit d38afeec26 ("tcp/udp: Call inet6_destroy_sock()
in IPv6 sk->sk_destruct()."), we call inet6_destroy_sock() in
sk->sk_destruct() by setting inet6_sock_destruct() to it to make
sure we do not leak inet6-specific resources.
Now we can remove unnecessary inet6_destroy_sock() calls in
sk->sk_prot->destroy().
DCCP and SCTP have their own sk->sk_destruct() function, so we
change them separately in the following patches.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ioana Ciornei says:
====================
net: dpaa2-eth: AF_XDP zero-copy support
This patch set adds support for AF_XDP zero-copy in the dpaa2-eth
driver. The support is available on the LX2160A SoC and its variants and
only on interfaces (DPNIs) with a maximum of 8 queues (HW limitations
are the root cause).
We are first implementing the .get_channels() callback since this a
dependency for further work.
Patches 2-3 are working on making the necessary changes for multiple
buffer pools on a single interface. By default, without an AF_XDP socket
attached, only a single buffer pool will be used and shared between all
the queues. The changes in the functions are made in this patch, but the
actual allocation and setup of a new BP is done in patch#10.
Patches 4-5 are improving the information exposed in debugfs. We are
exposing a new file to show which buffer pool is used by what channels
and how many buffers it currently has.
The 6th patch updates the dpni_set_pools() firmware API so that we are
capable of setting up a different buffer per queue in later patches.
In the 7th patch the generic dev_open/close APIs are used instead of the
dpaa2-eth internal ones.
Patches 8-9 are rearranging the existing code in dpaa2-eth.c in order to
create new functions which will be used in the XSK implementation in
dpaa2-xsk.c
Finally, the last 3 patches are adding the actual support for both the
Rx and Tx path of AF_XDP zero-copy and some associated tracepoints.
Details on the implementation can be found in the actual patch.
Changes in v2:
- 3/12: Export dpaa2_eth_allocate_dpbp/dpaa2_eth_free_dpbp in this
patch to avoid a build warning. The functions will be used in next
patches.
- 6/12: Use __le16 instead of u16 for the dpbp_id field.
- 12/12: Use xdp_buff->data_hard_start when tracing the BP seeding.
Changes in v3:
- 3/12: fix leaking of bp on error path
====================
Acked-by: Björn Töpel <bjorn@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Define the dpaa2_tx_xsk_fd and dpaa2_rx_xsk_fd trace events for the XSK
zero-copy Rx and Tx path. Also, define the dpaa2_eth_buf as an event
class so that both dpaa2_eth_buf_seed and dpaa2_xsk_buf_seed traces can
derive from the same class.
Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support in dpaa2-eth for packet processing on the Tx path using
AF_XDP zero copy mode.
The newly added dpaa2_xsk_tx() function will handle enqueuing AF_XDP Tx
packets into the appropriate queue and update any necessary statistics.
On a more detailed note, the dpaa2_xsk_tx_build_fd() function handles
creating a Scatter-Gather frame descriptor with only one data buffer.
This is needed because otherwise we would need to impose a headroom in
the Tx buffer to store our software annotation structures.
This tactic is already used on the normal data path of the dpaa2-eth
driver, thus we are reusing the dpaa2_eth_sgt_get/dpaa2_eth_sgt_recycle
functions in order to allocate and recycle the Scatter-Gather table
buffers.
In case we have reached the maximum number of Tx XSK packets to be sent
in a NAPI cycle, we'll exit the dpaa2_eth_poll() and hope to be
rescheduled again.
On the XSK Tx confirmation path, we are just unmapping the SGT buffer
and recycle it for further use.
Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds the support for receiving packets via the AF_XDP
zero-copy mechanism in the dpaa2-eth driver. The support is available
only on the LX2160A SoC and variants because we are relying on the HW
capability to associate a buffer pool to a specific queue (QDBIN), only
available on newer WRIOP versions.
On the control path, the dpaa2_xsk_enable_pool() function is responsible
to allocate a buffer pool (BP), setup this new BP to be used only on the
requested queue and change the consume function to point to the XSK ZC
one.
We are forced to call dev_close() in order to change the queue to buffer
pool association (dpaa2_xsk_set_bp_per_qdbin) . This also works in our
favor since at dev_close() the buffer pools will be drained and at the
later dev_open() call they will be again seeded, this time with buffers
allocated from the XSK pool if needed.
On the data path, a new software annotation type is defined to be used
only for the XSK scenarios. This will enable us to pass keep necessary
information about a packet buffer between the moment in which it was
seeded and when it's received by the driver. In the XSK case, we are
keeping the associated xdp_buff.
Depending on the action returned by the BPF program, we will do the
following:
- XDP_PASS: copy the contents of the packet into a brand new skb,
recycle the initial buffer.
- XDP_TX: just enqueue the same frame descriptor back into the Tx path,
the buffer will get automatically released into the initial BP.
- XDP_REDIRECT: call xdp_do_redirect() and exit.
Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Carve out code from the dpaa2_eth_rx() function in order to create and
export the dpaa2_eth_receive_skb() function. Do this in order to reuse
this code also from the XSK path which will be introduced in a later
patch.
Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The dpaa2_eth_alloc_skb() function is added by moving code from the
dpaa2_eth_copybreak() previously defined function. What the new API does
is to allocate a new skb, copy the frame data from the passed FD to the
new skb and then return the skb.
Export this new function since we'll need the this functionality also
from the XSK code path.
Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of calling the internal functions which implement .ndo_stop and
.ndo_open, we can simply call dev_close and dev_open, so that we keep
the code cleaner.
Also, in the next patches we'll use the same APIs from other files
without needing to export the internal functions.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update the dpni_set_pool() firmware API so that in the next patches we
can configure per Rx queue (per QDBIN) buffer pools.
This is a hard requirement of the AF_XDP, thus we need the newer API
version.
Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Export the allocated buffer pools, the number of buffers that they have
currently and which channels are using which BP.
The output looks like below:
Buffer pool info for eth2:
IDX BPID Buf count CH#0 CH#1 CH#2 CH#3
BP#0 1 5124 x x x x
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Just give out an index for each channel that we export into the debug
file in the form of CH#<index>. This is purely to help corelate each
channel information from one debugfs file to another one.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch allows the configuration of multiple buffer pools associated
with a single DPNI object, each distinct DPBP object not necessarily
shared among all queues.
The user can interogate both the number of buffer pools and the buffer
count in each buffer pool by using the .get_ethtool_stats() callback.
Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rearrange the variables in the dpaa2_eth_get_ethtool_stats() function so
that we adhere to the reverse Christmas tree rule.
Also, in the next patch we are adding more variables and I didn't know
where to place them with the current ordering.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The .get_channels() ethtool_ops callback is implemented and exports the
number of queues: Rx, Tx, Tx conf and Rx err.
The last two ones, Tx confirmation and Rx err, are counted as 'others'.
The .set_channels() callback is not implemented since the DPAA2
software/firmware architecture does not allow the dynamic
reconfiguration of the number of queues.
Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We now have a fine grained filtering information so let's ensure proper
filtering in scan mode, which means that only beacons are processed.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20221019134423.877169-4-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Save the requested filtering level in the ->set_promiscuous()
helper. The logic is: either we want to enable promiscuous mode and we
want to disable filters entirely, or we want to use the highest
filtering level by default. This is of course an assumption that only
works today, but if in the future intermediate levels (such as scan
filtering level) are implemented in the core, this logic will need to be
updated. This would imply replacing ->set_promiscuous() by something
more fine grained anyway, so we are probably safe with this assumption.
Once saved in the PIB structure, we can use this value instead of trying
to access the PHY structure to know what hardware filtering level has
been advertised.
Suggested-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20221019134423.877169-3-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Perform the update of the PIB structure only in a single place. This way
we can have much simpler functions when updating the page, channel or
address filters. This helper will become even more useful when we will
update the ->set_promiscuous() callback to actually save the filtering
level in the PIB structure.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20221019134423.877169-2-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
- Fix compilation without RISCV_ISA_ZICBOM
- Fix kvm_riscv_vcpu_timer_pending() for Sstc
ARM:
- Fix a bug preventing restoring an ITS containing mappings
for very large and very sparse device topology
- Work around a relocation handling error when compiling
the nVHE object with profile optimisation
- Fix for stage-2 invalidation holding the VM MMU lock
for too long by limiting the walk to the largest
block mapping size
- Enable stack protection and branch profiling for VHE
- Two selftest fixes
x86:
- add compat implementation for KVM_X86_SET_MSR_FILTER ioctl
selftests:
- synchronize includes between include/uapi and tools/include/uapi
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmNT2hQUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNeVwgAkGGk2F2SF5s+MQUQ9tDPxyuRbddN
NPo/YRTKszKc8rK6d1TCbQi56I3e8Oa7kNkMF7CiBlAekB7B1r1ySg5qc+3lQebx
moME30Ru4nmfqPcZ7971MA8Me7zZxGzvIviL5KIwm1ownGifdTsPZ9jCvu4EPdzv
3dd10guH3GeBIq8QeQGEqNP4fticziwhE+IA3HZstcWsq96800Le7WNAgklfzdC+
YTB81QU6whHv6N/7YvRcTbp+tER3VIKdFMmRD1FwC90flhXMbxTymESFXULfHCM2
x/arGz2E31/QGgJo0/Yy2VPenr5ZMU57dL4SYWR02mwSfJQnJWb1cRdWnw==
=rxQ7
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"RISC-V:
- Fix compilation without RISCV_ISA_ZICBOM
- Fix kvm_riscv_vcpu_timer_pending() for Sstc
ARM:
- Fix a bug preventing restoring an ITS containing mappings for very
large and very sparse device topology
- Work around a relocation handling error when compiling the nVHE
object with profile optimisation
- Fix for stage-2 invalidation holding the VM MMU lock for too long
by limiting the walk to the largest block mapping size
- Enable stack protection and branch profiling for VHE
- Two selftest fixes
x86:
- add compat implementation for KVM_X86_SET_MSR_FILTER ioctl
selftests:
- synchronize includes between include/uapi and tools/include/uapi"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
tools: include: sync include/api/linux/kvm.h
KVM: x86: Add compat handler for KVM_X86_SET_MSR_FILTER
KVM: x86: Copy filter arg outside kvm_vm_ioctl_set_msr_filter()
kvm: Add support for arch compat vm ioctls
RISC-V: KVM: Fix kvm_riscv_vcpu_timer_pending() for Sstc
RISC-V: Fix compilation without RISCV_ISA_ZICBOM
KVM: arm64: vgic: Fix exit condition in scan_its_table()
KVM: arm64: nvhe: Fix build with profile optimization
KVM: selftests: Fix number of pages for memory slot in memslot_modification_stress_test
KVM: arm64: selftests: Fix multiple versions of GIC creation
KVM: arm64: Enable stack protection and branch profiling for VHE
KVM: arm64: Limit stage2_apply_range() batch size to largest block
KVM: arm64: Work out supported block level at compile time
This reverts commit 72a9585972.
It broke reboots on big-endian MIPS and MIPS64 malta QEMU instances,
which use the syscon driver. Little-endian is not effected, which means
likely it's important to handle regmap_get_val_endian() in this function
after all.
Fixes: 72a9585972 ("mfd: syscon: Remove repetition of the regmap_get_val_endian()")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Lee Jones <lee@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Rework how SIGTRAPs get delivered to events to address a bunch of
problems with it. Add a selftest for that too
-----BEGIN PGP SIGNATURE-----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=DXG7
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Fix raw data handling when perf events are used in bpf
- Rework how SIGTRAPs get delivered to events to address a bunch of
problems with it. Add a selftest for that too
* tag 'perf_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
bpf: Fix sample_flags for bpf_perf_event_output
selftests/perf_events: Add a SIGTRAP stress test with disables
perf: Fix missing SIGTRAPs
Intel perf LBR
- A CFI fix to ftrace along with a simplification
- Adjust handling of zero capacity bit mask for resctrl cache allocation
on AMD
- A fix to the AMD microcode loader to attempt patch application on
every logical thread
- A couple of topology fixes to handle CPUID leaf 0x1f enumeration info
properly
- Drop a -mabi=ms compiler option check as both compilers support it now
anyway
- A couple of fixes to how the initial, statically allocated FPU buffer
state is setup and its interaction with dynamic states at runtime
-----BEGIN PGP SIGNATURE-----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=2hxy
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.0_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"As usually the case, right after a major release, the tip urgent
branches accumulate a couple more fixes than normal. And here is the
x86, a bit bigger, urgent pile.
- Use the correct CPU capability clearing function on the error path
in Intel perf LBR
- A CFI fix to ftrace along with a simplification
- Adjust handling of zero capacity bit mask for resctrl cache
allocation on AMD
- A fix to the AMD microcode loader to attempt patch application on
every logical thread
- A couple of topology fixes to handle CPUID leaf 0x1f enumeration
info properly
- Drop a -mabi=ms compiler option check as both compilers support it
now anyway
- A couple of fixes to how the initial, statically allocated FPU
buffer state is setup and its interaction with dynamic states at
runtime"
* tag 'x86_urgent_for_v6.0_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Fix copy_xstate_to_uabi() to copy init states correctly
perf/x86/intel/lbr: Use setup_clear_cpu_cap() instead of clear_cpu_cap()
ftrace,kcfi: Separate ftrace_stub() and ftrace_stub_graph()
x86/ftrace: Remove ftrace_epilogue()
x86/resctrl: Fix min_cbm_bits for AMD
x86/microcode/AMD: Apply the patch early on every logical thread
x86/topology: Fix duplicated core ID within a package
x86/topology: Fix multiple packages shown on a single-package system
hwmon/coretemp: Handle large core ID value
x86/Kconfig: Drop check for -mabi=ms for CONFIG_EFI_STUB
x86/fpu: Exclude dynamic states from init_fpstate
x86/fpu: Fix the init_fpstate size check with the actual size
x86/fpu: Configure init_fpstate attributes orderly
-----BEGIN PGP SIGNATURE-----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=tTNe
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.1-2022-10-22' of git://git.kernel.dk/linux
Pull io_uring follow-up from Jens Axboe:
"Currently the zero-copy has automatic fallback to normal transmit, and
it was decided that it'd be cleaner to return an error instead if the
socket type doesn't support it.
Zero-copy does work with UDP and TCP, it's more of a future proofing
kind of thing (eg for samba)"
* tag 'io_uring-6.1-2022-10-22' of git://git.kernel.dk/linux:
io_uring/net: fail zc sendmsg when unsupported by socket
io_uring/net: fail zc send when unsupported by socket
net: flag sockets supporting msghdr originated zerocopy
- corsair-psu: Fix typo in USB id description, and add USB ID for new PSU
- pwm-fan: Fix fan power handling when disabling fan control
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEiHPvMQj9QTOCiqgVyx8mb86fmYEFAmNT97AACgkQyx8mb86f
mYEOxhAAlVhKbeTPvqefdXxuJSy5OKy7EeQktzRV0Mt4uWgOxZOW01IVXoTDHEiw
d8X8mW4HSa9/e/9uqMUtKLNRqkcZ0YEHkp06K/3FH1rwonpAlRt4fYw7UEujMVnR
PLgAAlkeROvYpNphW7YkUle0RDu41ugOuuM3DyjPSGE4CCdDQXMQBJSR2TBr5LZ7
Y84d/9vVPtEUZ957KlAxSVJ5RQHWomDDKwXocDG6sLLDCOdwsPNNuKj0aj7Z5Mmh
C3eh8zbLW1txOrKh/AiOioql4UcnV8RlWGNhDUYpF1VDkq3CFFdk3h1BX8eXcKag
sgeh6QkW5QGnmy99BxzPpGYIRu9zWM5Dq3LlJmvBX+zU+hv+Sb4IZFrfPUgQmDR0
acX66qfAvpxszST3XQKR4pVwqI6fVq5A7RSWdyrEtT6z1EwB2Ju5PYM5ncOQHrp/
+erMQwWXMRSGP7gGQNZHxZw7vckeYPZUsCRi2JCOoHxzmu6pcKkj0P+/VjyjMf8I
nqTbDhqOkBqxvJkNocKsvtapIqK4kpHHVL91VZqUJ4ePlpt8W7ax58oxIGJv/c+L
u2rdVyZpeg0x20a6VrmJc92y7QBlB904Fk+nPwdNh07ltSw2jmkgdXuwIAIIuRZu
I48c6PLGYOaBgSEpv8ew4cVOk2edBT45OKpA96OHHlIPK6um72g=
=ajp4
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- corsair-psu: Fix typo in USB id description, and add USB ID for new
PSU
- pwm-fan: Fix fan power handling when disabling fan control
* tag 'hwmon-for-v6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (corsair-psu) Add USB id of the new HX1500i psu
hwmon: (pwm-fan) Explicitly switch off fan power when setting pwm1_enable to 0
hwmon: (corsair-psu) fix typo in USB id description
Steen Hegelund