LoadPin expects the file with trusted verity root digests to be
an ASCII file with one digest (hex value) per line. A pinned
root could contain files that meet these format requirements,
even though the hex values don't represent trusted root
digests.
Add a new requirement to the file format which consists in
the first line containing a fixed string. This prevents
attackers from feeding files with an otherwise valid format
to LoadPin.
Suggested-by: Sarthak Kukreti <sarthakkukreti@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220906181725.1.I3f51d1bb0014e5a5951be4ad3c5ad7c7ca1dfc32@changeid
The copy_from_user() function returns the number of bytes remaining to
be copied on a failure. Such failures should return -EFAULT to high
levels.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 3f805f8cc2 ("LoadPin: Enable loading from trusted dm-verity devices")
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: linux-security-module@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Extend LoadPin to allow loading of kernel files from trusted dm-verity [1]
devices.
This change adds the concept of trusted verity devices to LoadPin. LoadPin
maintains a list of root digests of verity devices it considers trusted.
Userspace can populate this list through an ioctl on the new LoadPin
securityfs entry 'dm-verity'. The ioctl receives a file descriptor of
a file with verity digests as parameter. Verity reads the digests from
this file after confirming that the file is located on the pinned root.
The digest file must contain one digest per line. The list of trusted
digests can only be set up once, which is typically done at boot time.
When a kernel file is read LoadPin first checks (as usual) whether the file
is located on the pinned root, if so the file can be loaded. Otherwise, if
the verity extension is enabled, LoadPin determines whether the file is
located on a verity backed device and whether the root digest of that
device is in the list of trusted digests. The file can be loaded if the
verity device has a trusted root digest.
Background:
As of now LoadPin restricts loading of kernel files to a single pinned
filesystem, typically the rootfs. This works for many systems, however it
can result in a bloated rootfs (and OTA updates) on platforms where
multiple boards with different hardware configurations use the same rootfs
image. Especially when 'optional' files are large it may be preferable to
download/install them only when they are actually needed by a given board.
Chrome OS uses Downloadable Content (DLC) [2] to deploy certain 'packages'
at runtime. As an example a DLC package could contain firmware for a
peripheral that is not present on all boards. DLCs use dm-verity to verify
the integrity of the DLC content.
[1] https://www.kernel.org/doc/html/latest/admin-guide/device-mapper/verity.html
[2] https://chromium.googlesource.com/chromiumos/platform2/+/HEAD/dlcservice/docs/developer.md
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/lkml/20220627083512.v7.2.I01c67af41d2f6525c6d023101671d7339a9bc8b5@changeid
Signed-off-by: Kees Cook <keescook@chromium.org>
As with the kernel_load_data LSM hook, add a "contents" flag to the
kernel_read_file LSM hook that indicates whether the LSM can expect
a matching call to the kernel_post_read_file LSM hook with the full
contents of the file. With the coming addition of partial file read
support for kernel_read_file*() API, the LSM will no longer be able
to always see the entire contents of a file during the read calls.
For cases where the LSM must read examine the complete file contents,
it will need to do so on its own every time the kernel_read_file
hook is called with contents=false (or reject such cases). Adjust all
existing LSMs to retain existing behavior.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Link: https://lore.kernel.org/r/20201002173828.2099543-12-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are a few places in the kernel where LSMs would like to have
visibility into the contents of a kernel buffer that has been loaded or
read. While security_kernel_post_read_file() (which includes the
buffer) exists as a pairing for security_kernel_read_file(), no such
hook exists to pair with security_kernel_load_data().
Earlier proposals for just using security_kernel_post_read_file() with a
NULL file argument were rejected (i.e. "file" should always be valid for
the security_..._file hooks, but it appears at least one case was
left in the kernel during earlier refactoring. (This will be fixed in
a subsequent patch.)
Since not all cases of security_kernel_load_data() can have a single
contiguous buffer made available to the LSM hook (e.g. kexec image
segments are separately loaded), there needs to be a way for the LSM to
reason about its expectations of the hook coverage. In order to handle
this, add a "contents" argument to the "kernel_load_data" hook that
indicates if the newly added "kernel_post_load_data" hook will be called
with the full contents once loaded. That way, LSMs requiring full contents
can choose to unilaterally reject "kernel_load_data" with contents=false
(which is effectively the existing hook coverage), but when contents=true
they can allow it and later evaluate the "kernel_post_load_data" hook
once the buffer is loaded.
With this change, LSMs can gain coverage over non-file-backed data loads
(e.g. init_module(2) and firmware userspace helper), which will happen
in subsequent patches.
Additionally prepare IMA to start processing these cases.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: KP Singh <kpsingh@google.com>
Link: https://lore.kernel.org/r/20201002173828.2099543-9-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move kernel_read_file* out of linux/fs.h to its own linux/kernel_read_file.h
include file. That header gets pulled in just about everywhere
and doesn't really need functions not related to the general fs interface.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Link: https://lore.kernel.org/r/20200706232309.12010-2-scott.branden@broadcom.com
Link: https://lore.kernel.org/r/20201002173828.2099543-4-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move most of the block related definition out of fs.h into more suitable
headers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In the sysctl code the proc_dointvec_minmax() function is often used to
validate the user supplied value between an allowed range. This
function uses the extra1 and extra2 members from struct ctl_table as
minimum and maximum allowed value.
On sysctl handler declaration, in every source file there are some
readonly variables containing just an integer which address is assigned
to the extra1 and extra2 members, so the sysctl range is enforced.
The special values 0, 1 and INT_MAX are very often used as range
boundary, leading duplication of variables like zero=0, one=1,
int_max=INT_MAX in different source files:
$ git grep -E '\.extra[12].*&(zero|one|int_max)' |wc -l
248
Add a const int array containing the most commonly used values, some
macros to refer more easily to the correct array member, and use them
instead of creating a local one for every object file.
This is the bloat-o-meter output comparing the old and new binary
compiled with the default Fedora config:
# scripts/bloat-o-meter -d vmlinux.o.old vmlinux.o
add/remove: 2/2 grow/shrink: 0/2 up/down: 24/-188 (-164)
Data old new delta
sysctl_vals - 12 +12
__kstrtab_sysctl_vals - 12 +12
max 14 10 -4
int_max 16 - -16
one 68 - -68
zero 128 28 -100
Total: Before=20583249, After=20583085, chg -0.00%
[mcroce@redhat.com: tipc: remove two unused variables]
Link: http://lkml.kernel.org/r/20190530091952.4108-1-mcroce@redhat.com
[akpm@linux-foundation.org: fix net/ipv6/sysctl_net_ipv6.c]
[arnd@arndb.de: proc/sysctl: make firmware loader table conditional]
Link: http://lkml.kernel.org/r/20190617130014.1713870-1-arnd@arndb.de
[akpm@linux-foundation.org: fix fs/eventpoll.c]
Link: http://lkml.kernel.org/r/20190430180111.10688-1-mcroce@redhat.com
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Aaron Tomlin <atomlin@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Based on 1 normalized pattern(s):
this software is licensed under the terms of the gnu general public
license version 2 as published by the free software foundation and
may be copied distributed and modified under those terms this
program is distributed in the hope that it will be useful but
without any warranty without even the implied warranty of
merchantability or fitness for a particular purpose see the gnu
general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 285 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linux kernel already provide MODULE_SIG and KEXEC_VERIFY_SIG to
make sure loaded kernel module and kernel image are trusted. This
patch adds a kernel command line option "loadpin.exclude" which
allows to exclude specific file types from LoadPin. This is useful
when people want to use different mechanisms to verify module and
kernel image while still use LoadPin to protect the integrity of
other files kernel loads.
Signed-off-by: Ke Wu <mikewu@google.com>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
[kees: fix array size issue reported by Coverity via Colin Ian King]
Signed-off-by: Kees Cook <keescook@chromium.org>
This converts LoadPin from being a direct "minor" LSM into an ordered LSM.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
LoadPin's "enabled" setting is really about enforcement, not whether
or not the LSM is using LSM hooks. Instead, split this out so that LSM
enabling can be logically distinct from whether enforcement is happening
(for example, the pinning happens when the LSM is enabled, but the pin
is only checked when "enforce" is set). This allows LoadPin to continue
to operate sanely in test environments once LSM enable/disable is
centrally handled (i.e. we want LoadPin to be enabled separately from
its enforcement).
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Instead of only reporting major/minor, include the actual block device
name, at least as seen by the kernel.
Signed-off-by: Kees Cook <keescook@chromium.org>
Both the init_module and finit_module syscalls call either directly
or indirectly the security_kernel_read_file LSM hook. This patch
replaces the direct call in init_module with a call to the new
security_kernel_load_data hook and makes the corresponding changes
in SELinux, LoadPin, and IMA.
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Kees Cook <keescook@chromium.org>
Acked-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: James Morris <james.morris@microsoft.com>
Mark all of the registration hooks as __ro_after_init (via the
__lsm_ro_after_init macro).
Signed-off-by: James Morris <james.l.morris@oracle.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: Kees Cook <keescook@chromium.org>
I am still tired of having to find indirect ways to determine
what security modules are active on a system. I have added
/sys/kernel/security/lsm, which contains a comma separated
list of the active security modules. No more groping around
in /proc/filesystems or other clever hacks.
Unchanged from previous versions except for being updated
to the latest security next branch.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: John Johansen <john.johansen@canonical.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Instead of being enabled by default when SECURITY_LOADPIN is selected,
provide an additional (default off) config to determine the boot time
behavior. As before, the "loadpin.enabled=0/1" kernel parameter remains
available.
Suggested-by: James Morris <jmorris@namei.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: James Morris <james.l.morris@oracle.com>
This LSM enforces that kernel-loaded files (modules, firmware, etc)
must all come from the same filesystem, with the expectation that
such a filesystem is backed by a read-only device such as dm-verity
or CDROM. This allows systems that have a verified and/or unchangeable
filesystem to enforce module and firmware loading restrictions without
needing to sign the files individually.
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Matthias Kaehlcke