Pull overlayfs updates from Miklos Szeredi:
- Report constant st_ino values across copy-up even if underlying
layers are on different filesystems, but using different st_dev
values for each layer.
Ideally we'd report the same st_dev across the overlay, and it's
possible to do for filesystems that use only 32bits for st_ino by
unifying the inum space. It would be nice if it wasn't a choice of 32
or 64, rather filesystems could report their current maximum (that
could change on resize, so it wouldn't be set in stone).
- miscellaneus fixes and a cleanup of ovl_fill_super(), that was long
overdue.
- created a path_put_init() helper that clears out the pointers after
putting the ref.
I think this could be useful elsewhere, so added it to <linux/path.h>
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: (30 commits)
ovl: remove unneeded arg from ovl_verify_origin()
ovl: Put upperdentry if ovl_check_origin() fails
ovl: rename ufs to ofs
ovl: clean up getting lower layers
ovl: clean up workdir creation
ovl: clean up getting upper layer
ovl: move ovl_get_workdir() and ovl_get_lower_layers()
ovl: reduce the number of arguments for ovl_workdir_create()
ovl: change order of setup in ovl_fill_super()
ovl: factor out ovl_free_fs() helper
ovl: grab reference to workbasedir early
ovl: split out ovl_get_indexdir() from ovl_fill_super()
ovl: split out ovl_get_lower_layers() from ovl_fill_super()
ovl: split out ovl_get_workdir() from ovl_fill_super()
ovl: split out ovl_get_upper() from ovl_fill_super()
ovl: split out ovl_get_lowerstack() from ovl_fill_super()
ovl: split out ovl_get_workpath() from ovl_fill_super()
ovl: split out ovl_get_upperpath() from ovl_fill_super()
ovl: use path_put_init() in error paths for ovl_fill_super()
vfs: add path_put_init()
...
If ovl_check_origin() fails, we should put upperdentry. We have a reference
on it by now. So goto out_put_upper instead of out.
Fixes: a9d019573e ("ovl: lookup non-dir copy-up-origin by file handle")
Cc: <stable@vger.kernel.org> #4.12
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Rename all "struct ovl_fs" pointers to "ofs". The "ufs" name is historical
and can only be found in overlayfs/super.c.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Move calling ovl_get_lower_layers() into ovl_get_lowerstack().
ovl_get_lowerstack() now returns the root dentry's filled in ovl_entry.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Move calling ovl_get_workdir() into ovl_get_workpath().
Rename ovl_get_workdir() to ovl_make_workdir() and ovl_get_workpath() to
ovl_get_workdir().
Workpath is now not needed outside ovl_get_workdir().
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Merge ovl_get_upper() and ovl_get_upperpath().
The resulting function is named ovl_get_upper(), though it still returns
upperpath as well.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Remove "sb" and "dentry" arguments of ovl_workdir_create() and related
functions. Move setting MS_RDONLY flag to callers.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Move ovl_get_upper() immediately after ovl_get_upperpath(),
ovl_get_workdir() immediately after ovl_get_workdir() and
ovl_get_lower_layers() immediately after ovl_get_lowerstack().
Also move prepare_creds() up to where other allocations are happening.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
ovl_rename() updates dir cache version for impure old parent if an entry
with copy up origin is moved into old parent, but it did not update
cache version if the entry moved out of old parent has a copy up origin.
[SzM] Same for new dir: we updated the version if an entry with origin was
moved in, but not if an entry with origin was moved out.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
For the case of all layers not on the same fs, return the copy up origin
inode st_dev/st_ino for non-dir from stat(2).
This guaranties constant st_dev/st_ino for non-dir across copy up.
Like the same fs case, st_ino of non-dir is also persistent.
If the st_dev/st_ino for copied up object would have been the same as
that of the real underlying lower file, running diff on underlying lower
file and overlay copied up file would result in diff reporting that the
two files are equal when in fact, they may have different content.
Therefore, unlike the same fs case, st_dev is not persistent because it
uses the unique anonymous bdev allocated for the lower layer.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
For non-samefs setup, to make sure that st_dev/st_ino pair is unique
across the system, we return a unique anonymous st_dev for stat(2)
of lower layer inode.
A following patch is going to fix constant st_dev/st_ino across copy up
by returning origin st_dev/st_ino for copied up objects.
If the st_dev/st_ino for copied up object would have been the same as
that of the real underlying lower file, running diff on underlying lower
file and overlay copied up file would result in diff reporting that the
2 files are equal when in fact, they may have different content.
[amir: simplify ovl_get_pseudo_dev()
split from allocate anonymous bdev patch]
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Generate unique values of st_dev per lower layer for non-samefs
overlay mount. The unique values are obtained by allocating anonymous
bdevs for each of the lowerdirs in the overlayfs instance.
The anonymous bdev is going to be returned by stat(2) for lowerdir
non-dir entries in non-samefs case.
[amir: split from ovl_getattr() and re-structure patches]
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Define new structures to represent overlay instance lower layers and
overlay merge dir lower layers to make room for storing more per layer
information in-memory.
Instead of keeping the fs instance lower layers in an array of struct
vfsmount, keep them in an array of new struct ovl_layer, that has a
pointer to struct vfsmount.
Instead of keeping the dentry lower layers in an array of struct path,
keep them in an array of new struct ovl_path, that has a pointer to
struct dentry and to struct ovl_layer.
Add a small helper to find the fs layer id that correspopnds to a lower
struct ovl_path and use it in ovl_lookup().
[amir: split re-structure from anonymous bdev patch]
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Most overlayfs c files already explicitly include ovl_entry.h
to use overlay entry struct definitions and upcoming changes
are going to require even more c files to include this header.
All overlayfs c files include overlayfs.h and overlayfs.h itself
refers to some structs defined in ovl_entry.h, so it seems more
logic to include ovl_entry.h from overlayfs.h than from c files.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
An "origin && non-merge" upper dir may have leftover whiteouts that
were created in past mount. overlayfs does no clear this dir when we
delete it, which may lead to rmdir fail or temp file left in workdir.
Simple reproducer:
mkdir lower upper work merge
mkdir -p lower/dir
touch lower/dir/a
mount -t overlay overlay -olowerdir=lower,upperdir=upper,\
workdir=work merge
rm merge/dir/a
umount merge
rm -rf lower/*
touch lower/dir (*)
mount -t overlay overlay -olowerdir=lower,upperdir=upper,\
workdir=work merge
rm -rf merge/dir
Syslog dump:
overlayfs: cleanup of 'work/#7' failed (-39)
(*): if we do not create the regular file, the result is different:
rm: cannot remove "dir/": Directory not empty
This patch adds a check for the case of non-merge dir that may contain
whiteouts, and calls ovl_check_empty_dir() to check and clear whiteouts
from upper dir when an empty dir is being deleted.
[amir: split patch from ovl_check_empty_dir() cleanup
rename ovl_is_origin() to ovl_may_have_whiteouts()
check OVL_WHITEOUTS flag instead of checking origin xattr]
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Filter out non-whiteout non-upper entries from list of merge dir entries
while checking if merge dir is empty in ovl_check_empty_dir().
The remaining work for ovl_clear_empty() is to clear all entries on the
list.
[amir: split patch from rmdir bug fix]
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
If a non-merge dir in an overlay mount has an overlay.origin xattr, it
means it was once an upper merge dir, which may contain whiteouts and
then the lower dir was removed under it.
Do not iterate real dir directly in this case to avoid exposing whiteouts.
[SzM] Set OVL_WHITEOUT for all merge directories as well.
[amir] A directory that was just copied up does not have the OVL_WHITEOUTS
flag. We need to set it to fix merge dir iteration.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This fixes a lockdep splat when mounting a nested overlayfs.
Fixes: a015dafcaf ("ovl: use ovl_inode mutex to synchronize...")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
With index=on, ovl_indexdir_cleanup() tries to cleanup invalid index
entries (e.g. bad index name). This behavior could result in cleaning of
entries created by newer kernels and is therefore undesirable.
Instead, abort mount if such entries are encountered. We still cleanup
'stale' entries and 'orphan' entries, both those cases can be a result
of offline changes to lower and upper dirs.
When encoutering an index entry of type directory or whiteout, kernel
was supposed to fallback to read-only mount, but the fill_super()
operation returns EROFS in this case instead of returning success with
read-only mount flag, so mount fails when encoutering directory or
whiteout index entries. Bless this behavior by returning -EINVAL on
directory and whiteout index entries as we do for all unsupported index
entries.
Fixes: 61b674710c ("ovl: do not cleanup directory and whiteout index..")
Cc: <stable@vger.kernel.org> # v4.13
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Treat ENOENT from index entry lookup the same way as treating a returned
negative dentry. Apparently, either could be returned if file is not
found, depending on the underlying file system.
Fixes: 359f392ca5 ("ovl: lookup index entry for copy up origin")
Cc: <stable@vger.kernel.org> # v4.13
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Commit fbaf94ee3c ("ovl: don't set origin on broken lower hardlink")
attempt to avoid the condition of non-indexed upper inode with lower
hardlink as origin. If this condition is found, lookup returns EIO.
The protection of commit mentioned above does not cover the case of lower
that is not a hardlink when it is copied up (with either index=off/on)
and then lower is hardlinked while overlay is offline.
Changes to lower layer while overlayfs is offline should not result in
unexpected behavior, so a permanent EIO error after creating a link in
lower layer should not be considered as correct behavior.
This fix replaces EIO error with success in cases where upper has origin
but no index is found, or index is found that does not match upper
inode. In those cases, lookup will not fail and the returned overlay inode
will be hashed by upper inode instead of by lower origin inode.
Fixes: 359f392ca5 ("ovl: lookup index entry for copy up origin")
Cc: <stable@vger.kernel.org> # v4.13
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
READ_ONCE() now has an implicit smp_read_barrier_depends() call, so it
can be used instead of lockless_dereference() without any change in
semantics.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1508840570-22169-4-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The error code is missing here so it means we return ERR_PTR(0) or NULL.
The other error paths all return an error code so this probably should
as well.
Fixes: 02b69b284c ("ovl: lookup redirects")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This was detected by fault injection test
Signed-off-by: Hirofumi Nakagawa <nklabs@gmail.com>
Fixes: 13cf199d00 ("ovl: allocate an ovl_inode struct")
Cc: <stable@vger.kernel.org> # v4.13
Enforcing exclusive ownership on upper/work dirs caused a docker
regression: https://github.com/moby/moby/issues/34672.
Euan spotted the regression and pointed to the offending commit.
Vivek has brought the regression to my attention and provided this
reproducer:
Terminal 1:
mount -t overlay -o workdir=work,lowerdir=lower,upperdir=upper none
merged/
Terminal 2:
unshare -m
Terminal 1:
umount merged
mount -t overlay -o workdir=work,lowerdir=lower,upperdir=upper none
merged/
mount: /root/overlay-testing/merged: none already mounted or mount point
busy
To fix the regression, I replaced the error with an alarming warning.
With index feature enabled, mount does fail, but logs a suggestion to
override exclusive dir protection by disabling index.
Note that index=off mount does take the inuse locks, so a concurrent
index=off will issue the warning and a concurrent index=on mount will fail.
Documentation was updated to reflect this change.
Fixes: 2cac0c00a6 ("ovl: get exclusive ownership on upper/work dirs")
Cc: <stable@vger.kernel.org> # v4.13
Reported-by: Euan Kemp <euank@euank.com>
Reported-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Use the ovl_lock_rename_workdir() helper which requires
unlock_rename() only on lock success.
Fixes: ("fd210b7d67ee ovl: move copy up lock out")
Cc: <stable@vger.kernel.org> # v4.13
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
index dentry was not released when breaking out of the loop
due to index verification error.
Fixes: 415543d5c6 ("ovl: cleanup bad and stale index entries on mount")
Cc: <stable@vger.kernel.org> # v4.13
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Pull mount flag updates from Al Viro:
"Another chunk of fmount preparations from dhowells; only trivial
conflicts for that part. It separates MS_... bits (very grotty
mount(2) ABI) from the struct super_block ->s_flags (kernel-internal,
only a small subset of MS_... stuff).
This does *not* convert the filesystems to new constants; only the
infrastructure is done here. The next step in that series is where the
conflicts would be; that's the conversion of filesystems. It's purely
mechanical and it's better done after the merge, so if you could run
something like
list=$(for i in MS_RDONLY MS_NOSUID MS_NODEV MS_NOEXEC MS_SYNCHRONOUS MS_MANDLOCK MS_DIRSYNC MS_NOATIME MS_NODIRATIME MS_SILENT MS_POSIXACL MS_KERNMOUNT MS_I_VERSION MS_LAZYTIME; do git grep -l $i fs drivers/staging/lustre drivers/mtd ipc mm include/linux; done|sort|uniq|grep -v '^fs/namespace.c$')
sed -i -e 's/\<MS_RDONLY\>/SB_RDONLY/g' \
-e 's/\<MS_NOSUID\>/SB_NOSUID/g' \
-e 's/\<MS_NODEV\>/SB_NODEV/g' \
-e 's/\<MS_NOEXEC\>/SB_NOEXEC/g' \
-e 's/\<MS_SYNCHRONOUS\>/SB_SYNCHRONOUS/g' \
-e 's/\<MS_MANDLOCK\>/SB_MANDLOCK/g' \
-e 's/\<MS_DIRSYNC\>/SB_DIRSYNC/g' \
-e 's/\<MS_NOATIME\>/SB_NOATIME/g' \
-e 's/\<MS_NODIRATIME\>/SB_NODIRATIME/g' \
-e 's/\<MS_SILENT\>/SB_SILENT/g' \
-e 's/\<MS_POSIXACL\>/SB_POSIXACL/g' \
-e 's/\<MS_KERNMOUNT\>/SB_KERNMOUNT/g' \
-e 's/\<MS_I_VERSION\>/SB_I_VERSION/g' \
-e 's/\<MS_LAZYTIME\>/SB_LAZYTIME/g' \
$list
and commit it with something along the lines of 'convert filesystems
away from use of MS_... constants' as commit message, it would save a
quite a bit of headache next cycle"
* 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
VFS: Differentiate mount flags (MS_*) from internal superblock flags
VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb)
vfs: Add sb_rdonly(sb) to query the MS_RDONLY flag on s_flags
GFP_TEMPORARY was introduced by commit e12ba74d8f ("Group short-lived
and reclaimable kernel allocations") along with __GFP_RECLAIMABLE. It's
primary motivation was to allow users to tell that an allocation is
short lived and so the allocator can try to place such allocations close
together and prevent long term fragmentation. As much as this sounds
like a reasonable semantic it becomes much less clear when to use the
highlevel GFP_TEMPORARY allocation flag. How long is temporary? Can the
context holding that memory sleep? Can it take locks? It seems there is
no good answer for those questions.
The current implementation of GFP_TEMPORARY is basically GFP_KERNEL |
__GFP_RECLAIMABLE which in itself is tricky because basically none of
the existing caller provide a way to reclaim the allocated memory. So
this is rather misleading and hard to evaluate for any benefits.
I have checked some random users and none of them has added the flag
with a specific justification. I suspect most of them just copied from
other existing users and others just thought it might be a good idea to
use without any measuring. This suggests that GFP_TEMPORARY just
motivates for cargo cult usage without any reasoning.
I believe that our gfp flags are quite complex already and especially
those with highlevel semantic should be clearly defined to prevent from
confusion and abuse. Therefore I propose dropping GFP_TEMPORARY and
replace all existing users to simply use GFP_KERNEL. Please note that
SLAB users with shrinkers will still get __GFP_RECLAIMABLE heuristic and
so they will be placed properly for memory fragmentation prevention.
I can see reasons we might want some gfp flag to reflect shorterm
allocations but I propose starting from a clear semantic definition and
only then add users with proper justification.
This was been brought up before LSF this year by Matthew [1] and it
turned out that GFP_TEMPORARY really doesn't have a clear semantic. It
seems to be a heuristic without any measured advantage for most (if not
all) its current users. The follow up discussion has revealed that
opinions on what might be temporary allocation differ a lot between
developers. So rather than trying to tweak existing users into a
semantic which they haven't expected I propose to simply remove the flag
and start from scratch if we really need a semantic for short term
allocations.
[1] http://lkml.kernel.org/r/20170118054945.GD18349@bombadil.infradead.org
[akpm@linux-foundation.org: fix typo]
[akpm@linux-foundation.org: coding-style fixes]
[sfr@canb.auug.org.au: drm/i915: fix up]
Link: http://lkml.kernel.org/r/20170816144703.378d4f4d@canb.auug.org.au
Link: http://lkml.kernel.org/r/20170728091904.14627-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Neil Brown <neilb@suse.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull overlayfs updates from Miklos Szeredi:
"This fixes d_ino correctness in readdir, which brings overlayfs on par
with normal filesystems regarding inode number semantics, as long as
all layers are on the same filesystem.
There are also some bug fixes, one in particular (random ioctl's
shouldn't be able to modify lower layers) that touches some vfs code,
but of course no-op for non-overlay fs"
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: fix false positive ESTALE on lookup
ovl: don't allow writing ioctl on lower layer
ovl: fix relatime for directories
vfs: add flags to d_real()
ovl: cleanup d_real for negative
ovl: constant d_ino for non-merge dirs
ovl: constant d_ino across copy up
ovl: fix readdir error value
ovl: check snprintf return
Commit b9ac5c274b ("ovl: hash overlay non-dir inodes by copy up origin")
verifies that the origin lower inode stored in the overlayfs inode matched
the inode of a copy up origin dentry found by lookup.
There is a false positive result in that check when lower fs does not
support file handles and copy up origin cannot be followed by file handle
at lookup time.
The false negative happens when finding an overlay inode in cache on a
copied up overlay dentry lookup. The overlay inode still 'remembers' the
copy up origin inode, but the copy up origin dentry is not available for
verification.
Relax the check in case copy up origin dentry is not available.
Fixes: b9ac5c274b ("ovl: hash overlay non-dir inodes by copy up...")
Cc: <stable@vger.kernel.org> # v4.13
Reported-by: Jordi Pujol <jordipujolp@gmail.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Need to treat non-regular overlayfs files the same as regular files when
checking for an atime update.
Add a d_real() flag to make it return the upper dentry for all file types.
Reported-by: "zhangyi (F)" <yi.zhang@huawei.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
d_real() is never called with a negative dentry. So remove the
d_is_negative() check (which would never trigger anyway, since d_is_reg()
returns false for a negative dentry).
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
While we could replace the smp_mb__before_spinlock() with the new
smp_mb__after_spinlock(), the normal pattern is to use
smp_store_release() to publish an object that is used for
lockless_dereference() -- and mirrors the regular rcu_assign_pointer()
/ rcu_dereference() patterns.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Impure directories are ones which contain objects with origins (i.e. those
that have been copied up). These are relevant to readdir operation only
because of the d_ino field, no other transformation is necessary. Also a
directory can become impure between two getdents(2) calls.
This patch creates a cache for impure directories. Unlike the cache for
merged directories, this one only contains entries with origin and is not
refcounted but has a its lifetime tied to that of the dentry.
Similarly to the merged cache, the impure cache is invalidated based on a
version number. This version number is incremented when an entry with
origin is added or removed from the directory.
If the cache is empty, then the impure xattr is removed from the directory.
This patch also fixes up handling of d_ino for the ".." entry if the parent
directory is merged.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When all layers are on the same fs, and iterating a directory which may
contain copy up entries, call vfs_getattr() on the overlay entries to make
sure that d_ino will be consistent with st_ino from stat(2).
There is an overhead of lookup per upper entry in readdir.
The overhead is minimal if the iterated entries are already in dcache. It
is also quite useful for the common case of 'ls -l' that readdir() pre
populates the dcache with the listed entries, making the following stat()
calls faster.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
actor's return value is taken as a bool (filled/not filled) so we need to
return the error in the context.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Index should always be of the same file type as origin, except for
the case of a whiteout index. A whiteout index should only exist
if all lower aliases have been unlinked, which means that finding
a lower origin on lookup whose index is a whiteout should be treated
as a lookup error.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Directory index entries are going to be used for looking up
redirected upper dirs by lower dir fh when decoding an overlay
file handle of a merge dir.
Whiteout index entries are going to be used as an indication that
an exported overlay file handle should be treated as stale (i.e.
after unlink of the overlay inode).
We don't know the verification rules for directory and whiteout
index entries, because they have not been implemented yet, so fail
to mount overlay rw if those entries are found to avoid corrupting
an index that was created by a newer kernel.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
inode_doinit_with_dentry() in SELinux wants to read the upper inode's xattr
to get security label, and ovl_xattr_get() calls ovl_dentry_real(), which
depends on dentry->d_inode, but d_inode is null and not initialized yet at
this point resulting in an Oops.
Fix by getting the upperdentry info from the inode directly in this case.
Reported-by: Eryu Guan <eguan@redhat.com>
Fixes: 09d8b58673 ("ovl: move __upperdentry to ovl_inode")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Firstly by applying the following with coccinelle's spatch:
@@ expression SB; @@
-SB->s_flags & MS_RDONLY
+sb_rdonly(SB)
to effect the conversion to sb_rdonly(sb), then by applying:
@@ expression A, SB; @@
(
-(!sb_rdonly(SB)) && A
+!sb_rdonly(SB) && A
|
-A != (sb_rdonly(SB))
+A != sb_rdonly(SB)
|
-A == (sb_rdonly(SB))
+A == sb_rdonly(SB)
|
-!(sb_rdonly(SB))
+!sb_rdonly(SB)
|
-A && (sb_rdonly(SB))
+A && sb_rdonly(SB)
|
-A || (sb_rdonly(SB))
+A || sb_rdonly(SB)
|
-(sb_rdonly(SB)) != A
+sb_rdonly(SB) != A
|
-(sb_rdonly(SB)) == A
+sb_rdonly(SB) == A
|
-(sb_rdonly(SB)) && A
+sb_rdonly(SB) && A
|
-(sb_rdonly(SB)) || A
+sb_rdonly(SB) || A
)
@@ expression A, B, SB; @@
(
-(sb_rdonly(SB)) ? 1 : 0
+sb_rdonly(SB)
|
-(sb_rdonly(SB)) ? A : B
+sb_rdonly(SB) ? A : B
)
to remove left over excess bracketage and finally by applying:
@@ expression A, SB; @@
(
-(A & MS_RDONLY) != sb_rdonly(SB)
+(bool)(A & MS_RDONLY) != sb_rdonly(SB)
|
-(A & MS_RDONLY) == sb_rdonly(SB)
+(bool)(A & MS_RDONLY) == sb_rdonly(SB)
)
to make comparisons against the result of sb_rdonly() (which is a bool)
work correctly.
Signed-off-by: David Howells <dhowells@redhat.com>
ovl_workdir_create() returns a valid index dentry or NULL.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Commit 54fb347e83 ("ovl: verify index dir matches upper dir")
introduced a new ovl_fh flag OVL_FH_FLAG_PATH_UPPER to indicate
an upper file handle, but forgot to add the flag to the mask of
valid flags, so index dir origin verification always discards
existing origin and stores a new one.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When linking a file with copy up origin into a new parent, mark the
new parent dir "impure".
Fixes: ee1d6d37b6 ("ovl: mark upper dir with type origin entries "impure"")
Cc: <stable@vger.kernel.org> # v4.12
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
On failure to prepare_creds(), mount fails with a random
return value, as err was last set to an integer cast of
a valid lower mnt pointer or set to 0 if inodes index feature
is enabled.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 3fe6e52f06 ("ovl: override creds with the ones from ...")
Cc: <stable@vger.kernel.org> # v4.7
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
index entry should live only as long as there are upper or lower
hardlinks.
Cleanup orphan index entries on mount and when dropping the last
overlay inode nlink.
When about to cleanup or link up to orphan index and the index inode
nlink > 1, admit that something went wrong and adjust overlay nlink
to index inode nlink - 1 to prevent it from dropping below zero.
This could happen when adding lower hardlinks underneath a mounted
overlay and then trying to unlink them.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
With inodes index enabled, an overlay inode nlink counts the union of upper
and non-covered lower hardlinks. During the lifetime of a non-pure upper
inode, the following nlink modifying operations can happen:
1. Lower hardlink copy up
2. Upper hardlink created, unlinked or renamed over
3. Lower hardlink whiteout or renamed over
For the first, copy up case, the union nlink does not change, whether the
operation succeeds or fails, but the upper inode nlink may change.
Therefore, before copy up, we store the union nlink value relative to the
lower inode nlink in the index inode xattr trusted.overlay.nlink.
For the second, upper hardlink case, the union nlink should be incremented
or decremented IFF the operation succeeds, aligned with nlink change of the
upper inode. Therefore, before link/unlink/rename, we store the union nlink
value relative to the upper inode nlink in the index inode.
For the last, lower cover up case, we simplify things by preceding the
whiteout or cover up with copy up. This makes sure that there is an index
upper inode where the nlink xattr can be stored before the copied up upper
entry is unlink.
Return the overlay inode nlinks for indexed upper inodes on stat(2).
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Implement a copy up method for non-dir objects using index dir to
prevent breaking lower hardlinks on copy up.
This method requires that the inodes index dir feature was enabled and
that all underlying fs support file handle encoding/decoding.
On the first lower hardlink copy up, upper file is created in index dir,
named after the hex representation of the lower origin inode file handle.
On the second lower hardlink copy up, upper file is found in index dir,
by the same lower handle key.
On either case, the upper indexed inode is then linked to the copy up
upper path.
The index entry remains linked for future lower hardlink copy up and for
lower to upper inode map, that is needed for exporting overlayfs to NFS.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Move ovl_copy_up_start()/ovl_copy_up_end() out so that it's used for both
tempfile and workdir copy ups.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
For rename, we need to ensure that an upper alias exists for hard links
before attempting the operation. Introduce a flag in ovl_entry to track
the state of the upper alias.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Factor out helper for copying lower inode data and metadata to temp
upper inode, that is common to copy up using O_TMPFILE and workdir.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
On copy up of regular file using an O_TMPFILE, lock upper dir only
before linking the tempfile in place.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Bad index entries are entries whose name does not match the
origin file handle stored in trusted.overlay.origin xattr.
Bad index entries could be a result of a system power off in
the middle of copy up.
Stale index entries are entries whose origin file handle is
stale. Stale index entries could be a result of copying layers
or removing lower entries while the overlay is not mounted.
The case of copying layers should be detected earlier by the
verification of upper root dir origin and index dir origin.
Both bad and stale index entries are detected and removed
on mount.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When inodes index feature is enabled, lookup in indexdir for the index
entry of lower real inode or copy up origin inode. The index entry name
is the hex representation of the lower inode file handle.
If the index dentry in negative, then either no lower aliases have been
copied up yet, or aliases have been copied up in older kernels and are
not indexed.
If the index dentry for a copy up origin inode is positive, but points
to an inode different than the upper inode, then either the upper inode
has been copied up and not indexed or it was indexed, but since then
index dir was cleared. Either way, that index cannot be used to indentify
the overlay inode.
If a positive dentry that matches the upper inode was found, then it is
safe to use the copy up origin st_ino for upper hardlinks, because all
indexed upper hardlinks are represented by the same overlay inode as the
copy up origin.
Set the INDEX type flag on an indexed upper dentry. A non-upper dentry
may also have a positive index from copy up of another lower hardlink.
This situation will be handled by following patches.
Index lookup is going to be used to prevent breaking hardlinks on copy up.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
An index dir contains persistent hardlinks to files in upper dir.
Therefore, we must never mount an existing index dir with a differnt
upper dir.
Store the upper root dir file handle in index dir inode when index
dir is created and verify the file handle before using an existing
index dir on mount.
Add an 'is_upper' flag to the overlay file handle encoding and set it
when encoding the upper root file handle. This is not critical for index
dir verification, but it is good practice towards a standard overlayfs
file handle format for NFS export.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When inodes index feature is enabled, verify that the file handle stored
in upper root dir matches the lower root dir or fail to mount.
If upper root dir has no stored file handle, encode and store the lower
root dir file handle in overlay.origin xattr.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Create the index dir on mount. The index dir will contain hardlinks to
upper inodes, named after the hex representation of their origin lower
inodes.
The index dir is going to be used to prevent breaking lower hardlinks
on copy up and to implement overlayfs NFS export.
Because the feature is not fully backward compat, enabling the feature
is opt-in by config/module/mount option.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Pass in the subdir name to create and specify if subdir is persistent
or if it should be cleaned up on every mount.
Move fallback to readonly mount on failure to create dir and print of error
message into the helper.
This function is going to be used for creating the persistent 'index' dir
under workbasedir.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
For the case of all layers not on the same fs, try to decode the copy up
origin file handle on any of the lower layers.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Bad things can happen if several concurrent overlay mounts try to
use the same upperdir/workdir path.
Try to get the 'inuse' advisory lock on upperdir and workdir.
Fail mount if another overlay mount instance or another user
holds the 'inuse' lock on these directories.
Note that this provides no protection for concurrent overlay
mount that use overlapping (i.e. descendant) upper/work dirs.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Added an i_state flag I_INUSE and helpers to set/clear/test the bit.
The 'inuse' lock is an 'advisory' inode lock, that can be used to extend
exclusive create protection beyond parent->i_mutex lock among cooperating
users.
This is going to be used by overlayfs to get exclusive ownership on upper
and work dirs among overlayfs mounts.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Use the new ovl_inode mutex to synchonize concurrent copy up
instead of the super block copy up workqueue.
Moving the synchronization object from the overlay dentry to
the overlay inode is needed for synchonizing concurrent copy up
of lower hardlinks to the same upper inode.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When checking for consistency in directory operations (unlink, rename,
etc.) match inodes not dentries.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We need some more space to store overlay inode data in memory,
so allocate overlay inodes from a slab of struct ovl_inode.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This patch fixes an overlay inode nlink leak in the case where
ovl_rename() renames over a non-dir.
This is not so critical, because overlay inode doesn't rely on
nlink dropping to zero for inode deletion.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
- introduce the new uuid_t/guid_t types that are going to replace
the somewhat confusing uuid_be/uuid_le types and make the terminology
fit the various specs, as well as the userspace libuuid library.
(me, based on a previous version from Amir)
- consolidated generic uuid/guid helper functions lifted from XFS
and libnvdimm (Amir and me)
- conversions to the new types and helpers (Amir, Andy and me)
-----BEGIN PGP SIGNATURE-----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=J/4P
-----END PGP SIGNATURE-----
Merge tag 'uuid-for-4.13' of git://git.infradead.org/users/hch/uuid into overlayfs-next
UUID/GUID updates:
- introduce the new uuid_t/guid_t types that are going to replace
the somewhat confusing uuid_be/uuid_le types and make the terminology
fit the various specs, as well as the userspace libuuid library.
(me, based on a previous version from Amir)
- consolidated generic uuid/guid helper functions lifted from XFS
and libnvdimm (Amir and me)
- conversions to the new types and helpers (Amir, Andy and me)
When copying up a file that has multiple hard links we need to break any
association with the origin file. This makes copy-up be essentially an
atomic replace.
The new file has nothing to do with the old one (except having the same
data and metadata initially), so don't set the overlay.origin attribute.
We can relax this in the future when we are able to index upper object by
origin.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 3a1e819b4e ("ovl: store file handle of lower inode on copy up")
Nothing prevents mischief on upper layer while we are busy copying up the
data.
Move the lookup right before the looked up dentry is actually used.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 01ad3eb8a0 ("ovl: concurrent copy up of regular files")
Cc: <stable@vger.kernel.org> # v4.11
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
For some file systems we still memcpy into it, but in various places this
already allows us to use the proper uuid helpers. More to come..
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com> (Changes to IMA/EVM)
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Filesystems filter out extended attributes in the "trusted." domain for
unprivlieged callers.
Overlay calls underlying filesystem's method with elevated privs, so need
to do the filtering in overlayfs too.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
An upper dir is marked "impure" to let ovl_iterate() know that this
directory may contain non pure upper entries whose d_ino may need to be
read from the origin inode.
We already mark a non-merge dir "impure" when moving a non-pure child
entry inside it, to let ovl_iterate() know not to iterate the non-merge
dir directly.
Mark also a merge dir "impure" when moving a non-pure child entry inside
it and when copying up a child entry inside it.
This can be used to optimize ovl_iterate() to perform a "pure merge" of
upper and lower directories, merging the content of the directories,
without having to read d_ino from origin inodes.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When moving a merge dir or non-dir with copy up origin into a non-merge
upper dir (a.k.a pure upper dir), we are marking the target parent dir
"impure". ovl_iterate() iterates pure upper dirs directly, because there is
no need to filter out whiteouts and merge dir content with lower dir. But
for the case of an "impure" upper dir, ovl_iterate() will not be able to
iterate the real upper dir directly, because it will need to lookup the
origin inode and use it to fill d_ino.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
On failure to set opaque/redirect xattr on rename, skip setting xattr and
return -EXDEV.
On failure to set opaque xattr when creating a new directory, -EIO is
returned instead of -EOPNOTSUPP.
Any failure to set those xattr will be recorded in super block and
then setting any xattr on upper won't be attempted again.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
xattr are needed by overlayfs for setting opaque dir, redirect dir
and copy up origin.
Check at mount time by trying to set the overlay.opaque xattr on the
workdir and if that fails issue a warning message.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We get a link error when EXPORTFS is not enabled:
ERROR: "exportfs_encode_fh" [fs/overlayfs/overlay.ko] undefined!
ERROR: "exportfs_decode_fh" [fs/overlayfs/overlay.ko] undefined!
This adds a Kconfig 'select' statement for overlayfs, the same way that
it is done for the other users of exportfs.
Fixes: 3a1e819b4e ("ovl: store file handle of lower inode on copy up")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Pull overlayfs update from Miklos Szeredi:
"The biggest part of this is making st_dev/st_ino on the overlay behave
like a normal filesystem (i.e. st_ino doesn't change on copy up,
st_dev is the same for all files and directories). Currently this only
works if all layers are on the same filesystem, but future work will
move the general case towards more sane behavior.
There are also miscellaneous fixes, including fixes to handling
append-only files. There's a small change in the VFS, but that only
has an effect on overlayfs, since otherwise file->f_path.dentry->inode
and file_inode(file) are always the same"
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: update documentation w.r.t. constant inode numbers
ovl: persistent inode numbers for upper hardlinks
ovl: merge getattr for dir and nondir
ovl: constant st_ino/st_dev across copy up
ovl: persistent inode number for directories
ovl: set the ORIGIN type flag
ovl: lookup non-dir copy-up-origin by file handle
ovl: use an auxiliary var for overlay root entry
ovl: store file handle of lower inode on copy up
ovl: check if all layers are on the same fs
ovl: do not set overlay.opaque on non-dir create
ovl: check IS_APPEND() on real upper inode
vfs: ftruncate check IS_APPEND() on real upper inode
ovl: Use designated initializers
ovl: lockdep annotate of nested stacked overlayfs inode lock
An upper type non directory dentry that is a copy up target
should have a reference to its lower copy up origin.
There are three ways for an upper type dentry to be instantiated:
1. A lower type dentry that is being copied up
2. An entry that is found in upper dir by ovl_lookup()
3. A negative dentry is hardlinked to an upper type dentry
In the first case, the lower reference is set before copy up.
In the second case, the lower reference is found by ovl_lookup().
In the last case of hardlinked upper dentry, it is not easy to
update the lower reference of the negative dentry. Instead,
drop the newly hardlinked negative dentry from dcache and let
the next access call ovl_lookup() to find its lower reference.
This makes sure that the inode number reported by stat(2) after
the hardlink is created is the same inode number that will be
reported by stat(2) after mount cycle, which is the inode number
of the lower copy up origin of the hardlink source.
NOTE that this does not fix breaking of lower hardlinks on copy
up, but only fixes the case of lower nlink == 1, whose upper copy
up inode is hardlinked in upper dir.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When all layers are on the same underlying filesystem, let stat(2) return
st_dev/st_ino values of the copy up origin inode if it is known.
This results in constant st_ino/st_dev representation of files in an
overlay mount before and after copy up.
When the underlying filesystem support NFS exportfs, the result is also
persistent st_ino/st_dev representation before and after mount cycle.
Lower hardlinks are broken on copy up to different upper files, so we
cannot use the lower origin st_ino for those different files, even for the
same fs case.
When all overlay layers are on the same fs, use overlay st_dev for non-dirs
to get the correct result from du -x.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
stat(2) on overlay directories reports the overlay temp inode
number, which is constant across copy up, but is not persistent.
When all layers are on the same fs, report the copy up origin inode
number for directories.
This inode number is persistent, unique across the overlay mount and
constant across copy up.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
For directory entries, non zero oe->numlower implies OVL_TYPE_MERGE.
Define a new type flag OVL_TYPE_ORIGIN to indicate that an entry holds a
reference to its lower copy up origin.
For directory entries ORIGIN := MERGE && UPPER. For non-dir entries ORIGIN
means that a lower type dentry has been recently copied up or that we were
able to find the copy up origin from overlay.origin xattr.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
If overlay.origin xattr is found on a non-dir upper inode try to get lower
dentry by calling exportfs_decode_fh().
On failure to lookup by file handle to lower layer, do not lookup the copy
up origin by name, because the lower found by name could be another file in
case the upper file was renamed.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Sometimes it is interesting to know if an upper file is pure upper or a
copy up target, and if it is a copy up target, it may be interesting to
find the copy up origin.
This will be used to preserve lower inode numbers across copy up.
Store the lower inode file handle in upper inode extended attribute
overlay.origin on copy up to use it later for these cases. Store the lower
filesystem uuid along side the file handle, so we can validate that we are
looking for the origin file in the original fs.
If lower fs does not support NFS export ops store a zero sized xattr so we
can always use the overlay.origin xattr to distinguish between a copy up
and a pure upper inode.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Some features can only work when all layers are on the same fs. Test this
condition during mount time, so features can check them later.
Add helper ovl_same_sb() to return the common super block in case all
layers are on the same fs.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The optimization for opaque dir create was wrongly being applied
also to non-dir create.
Fixes: 97c684cc91 ("ovl: create directories inside merged parent opaque")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org> # v4.10
For overlay file open, check IS_APPEND() on the real upper inode
inside d_real(), because the overlay inode does not have the
S_APPEND flag and IS_APPEND() can only be checked at open time.
Note that because overlayfs does not copy up the chattr inode flags
(i.e. S_APPEND, S_IMMUTABLE), the IS_APPEND() check is only relevant
for upper inodes that were set with chattr +a and not to lower
inodes that had chattr +a before copy up.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Prepare to mark sensitive kernel structures for randomization by making
sure they're using designated initializers. These were identified during
allyesconfig builds of x86, arm, and arm64, with most initializer fixes
extracted from grsecurity.
For these cases, use { }, which will be zero-filled, instead of
undesignated NULLs.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This removes the extra include header file that was added in commit
e58bc92783 "Pull overlayfs updates from Miklos Szeredi" now that it
is no longer needed.
There are probably other such includes that got added during the
scheduler header splitup series, but this is the one that annoyed me
personally and I know about.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
An overlayfs instance can be the lower layer of another overlayfs
instance. This setup triggers a lockdep splat of possible recursive
locking of sb->s_type->i_mutex_key in iterate_dir(). Trimmed snip:
[ INFO: possible recursive locking detected ]
bash/2468 is trying to acquire lock:
&sb->s_type->i_mutex_key#14, at: iterate_dir+0x7d/0x15c
but task is already holding lock:
&sb->s_type->i_mutex_key#14, at: iterate_dir+0x7d/0x15c
One problem observed with this splat is that ovl_new_inode()
does not call lockdep_annotate_inode_mutex_key() to annotate
the dir inode lock as &sb->s_type->i_mutex_dir_key like other
fs do.
The other problem is that the 2 nested levels of overlayfs inode
lock are annotated using the same key, which is the cause of the
false positive lockdep warning.
Fix this by annotating overlayfs inode lock in ovl_fill_inode()
according to stack level of the super block instance and use
different key for dir vs. non-dir like other fs do.
Here is an edited snip from /proc/lockdep_chains after
iterate_dir() of nested overlayfs:
[...] &ovl_i_mutex_dir_key[depth] (stack_depth=2)
[...] &ovl_i_mutex_dir_key[depth]#2 (stack_depth=1)
[...] &type->i_mutex_dir_key (stack_depth=0)
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Pull overlayfs updates from Miklos Szeredi:
"Because copy up can take a long time, serialized copy ups could be a
big performance bottleneck. This update allows concurrent copy up of
regular files eliminating this potential problem.
There are also minor fixes"
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: drop CAP_SYS_RESOURCE from saved mounter's credentials
ovl: properly implement sync_filesystem()
ovl: concurrent copy up of regular files
ovl: introduce copy up waitqueue
ovl: copy up regular file using O_TMPFILE
ovl: rearrange code in ovl_copy_up_locked()
ovl: check if upperdir fs supports O_TMPFILE
Pull vfs 'statx()' update from Al Viro.
This adds the new extended stat() interface that internally subsumes our
previous stat interfaces, and allows user mode to specify in more detail
what kind of information it wants.
It also allows for some explicit synchronization information to be
passed to the filesystem, which can be relevant for network filesystems:
is the cached value ok, or do you need open/close consistency, or what?
From David Howells.
Andreas Dilger points out that the first version of the extended statx
interface was posted June 29, 2010:
https://www.spinics.net/lists/linux-fsdevel/msg33831.html
* 'rebased-statx' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
statx: Add a system call to make enhanced file info available
Add a system call to make extended file information available, including
file creation and some attribute flags where available through the
underlying filesystem.
The getattr inode operation is altered to take two additional arguments: a
u32 request_mask and an unsigned int flags that indicate the
synchronisation mode. This change is propagated to the vfs_getattr*()
function.
Functions like vfs_stat() are now inline wrappers around new functions
vfs_statx() and vfs_statx_fd() to reduce stack usage.
========
OVERVIEW
========
The idea was initially proposed as a set of xattrs that could be retrieved
with getxattr(), but the general preference proved to be for a new syscall
with an extended stat structure.
A number of requests were gathered for features to be included. The
following have been included:
(1) Make the fields a consistent size on all arches and make them large.
(2) Spare space, request flags and information flags are provided for
future expansion.
(3) Better support for the y2038 problem [Arnd Bergmann] (tv_sec is an
__s64).
(4) Creation time: The SMB protocol carries the creation time, which could
be exported by Samba, which will in turn help CIFS make use of
FS-Cache as that can be used for coherency data (stx_btime).
This is also specified in NFSv4 as a recommended attribute and could
be exported by NFSD [Steve French].
(5) Lightweight stat: Ask for just those details of interest, and allow a
netfs (such as NFS) to approximate anything not of interest, possibly
without going to the server [Trond Myklebust, Ulrich Drepper, Andreas
Dilger] (AT_STATX_DONT_SYNC).
(6) Heavyweight stat: Force a netfs to go to the server, even if it thinks
its cached attributes are up to date [Trond Myklebust]
(AT_STATX_FORCE_SYNC).
And the following have been left out for future extension:
(7) Data version number: Could be used by userspace NFS servers [Aneesh
Kumar].
Can also be used to modify fill_post_wcc() in NFSD which retrieves
i_version directly, but has just called vfs_getattr(). It could get
it from the kstat struct if it used vfs_xgetattr() instead.
(There's disagreement on the exact semantics of a single field, since
not all filesystems do this the same way).
(8) BSD stat compatibility: Including more fields from the BSD stat such
as creation time (st_btime) and inode generation number (st_gen)
[Jeremy Allison, Bernd Schubert].
(9) Inode generation number: Useful for FUSE and userspace NFS servers
[Bernd Schubert].
(This was asked for but later deemed unnecessary with the
open-by-handle capability available and caused disagreement as to
whether it's a security hole or not).
(10) Extra coherency data may be useful in making backups [Andreas Dilger].
(No particular data were offered, but things like last backup
timestamp, the data version number and the DOS archive bit would come
into this category).
(11) Allow the filesystem to indicate what it can/cannot provide: A
filesystem can now say it doesn't support a standard stat feature if
that isn't available, so if, for instance, inode numbers or UIDs don't
exist or are fabricated locally...
(This requires a separate system call - I have an fsinfo() call idea
for this).
(12) Store a 16-byte volume ID in the superblock that can be returned in
struct xstat [Steve French].
(Deferred to fsinfo).
(13) Include granularity fields in the time data to indicate the
granularity of each of the times (NFSv4 time_delta) [Steve French].
(Deferred to fsinfo).
(14) FS_IOC_GETFLAGS value. These could be translated to BSD's st_flags.
Note that the Linux IOC flags are a mess and filesystems such as Ext4
define flags that aren't in linux/fs.h, so translation in the kernel
may be a necessity (or, possibly, we provide the filesystem type too).
(Some attributes are made available in stx_attributes, but the general
feeling was that the IOC flags were to ext[234]-specific and shouldn't
be exposed through statx this way).
(15) Mask of features available on file (eg: ACLs, seclabel) [Brad Boyer,
Michael Kerrisk].
(Deferred, probably to fsinfo. Finding out if there's an ACL or
seclabal might require extra filesystem operations).
(16) Femtosecond-resolution timestamps [Dave Chinner].
(A __reserved field has been left in the statx_timestamp struct for
this - if there proves to be a need).
(17) A set multiple attributes syscall to go with this.
===============
NEW SYSTEM CALL
===============
The new system call is:
int ret = statx(int dfd,
const char *filename,
unsigned int flags,
unsigned int mask,
struct statx *buffer);
The dfd, filename and flags parameters indicate the file to query, in a
similar way to fstatat(). There is no equivalent of lstat() as that can be
emulated with statx() by passing AT_SYMLINK_NOFOLLOW in flags. There is
also no equivalent of fstat() as that can be emulated by passing a NULL
filename to statx() with the fd of interest in dfd.
Whether or not statx() synchronises the attributes with the backing store
can be controlled by OR'ing a value into the flags argument (this typically
only affects network filesystems):
(1) AT_STATX_SYNC_AS_STAT tells statx() to behave as stat() does in this
respect.
(2) AT_STATX_FORCE_SYNC will require a network filesystem to synchronise
its attributes with the server - which might require data writeback to
occur to get the timestamps correct.
(3) AT_STATX_DONT_SYNC will suppress synchronisation with the server in a
network filesystem. The resulting values should be considered
approximate.
mask is a bitmask indicating the fields in struct statx that are of
interest to the caller. The user should set this to STATX_BASIC_STATS to
get the basic set returned by stat(). It should be noted that asking for
more information may entail extra I/O operations.
buffer points to the destination for the data. This must be 256 bytes in
size.
======================
MAIN ATTRIBUTES RECORD
======================
The following structures are defined in which to return the main attribute
set:
struct statx_timestamp {
__s64 tv_sec;
__s32 tv_nsec;
__s32 __reserved;
};
struct statx {
__u32 stx_mask;
__u32 stx_blksize;
__u64 stx_attributes;
__u32 stx_nlink;
__u32 stx_uid;
__u32 stx_gid;
__u16 stx_mode;
__u16 __spare0[1];
__u64 stx_ino;
__u64 stx_size;
__u64 stx_blocks;
__u64 __spare1[1];
struct statx_timestamp stx_atime;
struct statx_timestamp stx_btime;
struct statx_timestamp stx_ctime;
struct statx_timestamp stx_mtime;
__u32 stx_rdev_major;
__u32 stx_rdev_minor;
__u32 stx_dev_major;
__u32 stx_dev_minor;
__u64 __spare2[14];
};
The defined bits in request_mask and stx_mask are:
STATX_TYPE Want/got stx_mode & S_IFMT
STATX_MODE Want/got stx_mode & ~S_IFMT
STATX_NLINK Want/got stx_nlink
STATX_UID Want/got stx_uid
STATX_GID Want/got stx_gid
STATX_ATIME Want/got stx_atime{,_ns}
STATX_MTIME Want/got stx_mtime{,_ns}
STATX_CTIME Want/got stx_ctime{,_ns}
STATX_INO Want/got stx_ino
STATX_SIZE Want/got stx_size
STATX_BLOCKS Want/got stx_blocks
STATX_BASIC_STATS [The stuff in the normal stat struct]
STATX_BTIME Want/got stx_btime{,_ns}
STATX_ALL [All currently available stuff]
stx_btime is the file creation time, stx_mask is a bitmask indicating the
data provided and __spares*[] are where as-yet undefined fields can be
placed.
Time fields are structures with separate seconds and nanoseconds fields
plus a reserved field in case we want to add even finer resolution. Note
that times will be negative if before 1970; in such a case, the nanosecond
fields will also be negative if not zero.
The bits defined in the stx_attributes field convey information about a
file, how it is accessed, where it is and what it does. The following
attributes map to FS_*_FL flags and are the same numerical value:
STATX_ATTR_COMPRESSED File is compressed by the fs
STATX_ATTR_IMMUTABLE File is marked immutable
STATX_ATTR_APPEND File is append-only
STATX_ATTR_NODUMP File is not to be dumped
STATX_ATTR_ENCRYPTED File requires key to decrypt in fs
Within the kernel, the supported flags are listed by:
KSTAT_ATTR_FS_IOC_FLAGS
[Are any other IOC flags of sufficient general interest to be exposed
through this interface?]
New flags include:
STATX_ATTR_AUTOMOUNT Object is an automount trigger
These are for the use of GUI tools that might want to mark files specially,
depending on what they are.
Fields in struct statx come in a number of classes:
(0) stx_dev_*, stx_blksize.
These are local system information and are always available.
(1) stx_mode, stx_nlinks, stx_uid, stx_gid, stx_[amc]time, stx_ino,
stx_size, stx_blocks.
These will be returned whether the caller asks for them or not. The
corresponding bits in stx_mask will be set to indicate whether they
actually have valid values.
If the caller didn't ask for them, then they may be approximated. For
example, NFS won't waste any time updating them from the server,
unless as a byproduct of updating something requested.
If the values don't actually exist for the underlying object (such as
UID or GID on a DOS file), then the bit won't be set in the stx_mask,
even if the caller asked for the value. In such a case, the returned
value will be a fabrication.
Note that there are instances where the type might not be valid, for
instance Windows reparse points.
(2) stx_rdev_*.
This will be set only if stx_mode indicates we're looking at a
blockdev or a chardev, otherwise will be 0.
(3) stx_btime.
Similar to (1), except this will be set to 0 if it doesn't exist.
=======
TESTING
=======
The following test program can be used to test the statx system call:
samples/statx/test-statx.c
Just compile and run, passing it paths to the files you want to examine.
The file is built automatically if CONFIG_SAMPLES is enabled.
Here's some example output. Firstly, an NFS directory that crosses to
another FSID. Note that the AUTOMOUNT attribute is set because transiting
this directory will cause d_automount to be invoked by the VFS.
[root@andromeda ~]# /tmp/test-statx -A /warthog/data
statx(/warthog/data) = 0
results=7ff
Size: 4096 Blocks: 8 IO Block: 1048576 directory
Device: 00:26 Inode: 1703937 Links: 125
Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041
Access: 2016-11-24 09:02:12.219699527+0000
Modify: 2016-11-17 10:44:36.225653653+0000
Change: 2016-11-17 10:44:36.225653653+0000
Attributes: 0000000000001000 (-------- -------- -------- -------- -------- -------- ---m---- --------)
Secondly, the result of automounting on that directory.
[root@andromeda ~]# /tmp/test-statx /warthog/data
statx(/warthog/data) = 0
results=7ff
Size: 4096 Blocks: 8 IO Block: 1048576 directory
Device: 00:27 Inode: 2 Links: 125
Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041
Access: 2016-11-24 09:02:12.219699527+0000
Modify: 2016-11-17 10:44:36.225653653+0000
Change: 2016-11-17 10:44:36.225653653+0000
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Fix up affected files that include this signal functionality via sched.h.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add #include <linux/cred.h> dependencies to all .c files rely on sched.h
doing that for them.
Note that even if the count where we need to add extra headers seems high,
it's still a net win, because <linux/sched.h> is included in over
2,200 files ...
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
If overlay was mounted by root then quota set for upper layer does not work
because overlay now always use mounter's credentials for operations.
Also overlay might deplete reserved space and inodes in ext4.
This patch drops capability SYS_RESOURCE from saved credentials.
This affects creation new files, whiteouts, and copy-up operations.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Fixes: 1175b6b8d9 ("ovl: do operations on underlying file system in mounter's context")
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
overlayfs syncs all inode pages on sync_filesystem(), but it also
needs to call s_op->sync_fs() of upper fs for metadata sync.
This fixes correctness of syncfs(2) as demonstrated by following
xfs specific test:
xfs_sync_stats()
{
echo $1
echo -n "xfs_log_force = "
grep log /proc/fs/xfs/stat | awk '{ print $5 }'
}
xfs_sync_stats "before touch"
touch x
xfs_sync_stats "after touch"
xfs_io -c syncfs .
xfs_sync_stats "after syncfs"
xfs_io -c fsync x
xfs_sync_stats "after fsync"
xfs_io -c fsync x
xfs_sync_stats "after fsync #2"
When this test is run in overlay mount over xfs, log force
count does not increase with syncfs command.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Now that copy up of regular file is done using O_TMPFILE,
we don't need to hold rename_lock throughout copy up.
Use the copy up waitqueue to synchronize concurrent copy up
of the same file. Different regular files can be copied up
concurrently.
The upper dir inode_lock is taken instead of rename_lock,
because it is needed for lookup and later for linking the
temp file, but it is released while copying up data.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The overlay sb 'copyup_wq' and overlay inode 'copying' condition
variable are about to replace the upper sb rename_lock, as finer
grained synchronization objects for concurrent copy up.
Suggested-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
In preparation for concurrent copy up, implement copy up
of regular file as O_TMPFILE that is linked to upperdir
instead of a file in workdir that is moved to upperdir.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
As preparation to implementing copy up with O_TMPFILE,
name the variable for dentry before final rename 'temp' and
assign it to 'newdentry' only after rename.
Also lookup upper dentry before looking up temp dentry and
move ovl_set_timestamps() into ovl_copy_up_locked(), because
that is going to be more convenient for upcoming change.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This is needed for choosing between concurrent copyup
using O_TMPFILE and legacy copyup using workdir+rename.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
ovl_lookup_layer() iterates on path elements of d->name.name
but also frees and allocates a new pointer for d->name.name.
For the case of lookup in upper layer, the initial d->name.name
pointer is stable (dentry->d_name), but for lower layers, the
initial d->name.name can be d->redirect, which can be freed during
iteration.
[SzM]
Keep the count of remaining characters in the redirect path and calculate
the current position from that. This works becuase only the prefix is
modified, the ending always stays the same.
Fixes: 02b69b284c ("ovl: lookup redirects")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Pull partial readlink cleanups from Miklos Szeredi.
This is the uncontroversial part of the readlink cleanup patch-set that
simplifies the default readlink handling.
Miklos and Al are still discussing the rest of the series.
* git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
vfs: make generic_readlink() static
vfs: remove ".readlink = generic_readlink" assignments
vfs: default to generic_readlink()
vfs: replace calling i_op->readlink with vfs_readlink()
proc/self: use generic_readlink
ecryptfs: use vfs_get_link()
bad_inode: add missing i_op initializers
Pull overlayfs updates from Miklos Szeredi:
"This update contains:
- try to clone on copy-up
- allow renaming a directory
- split source into managable chunks
- misc cleanups and fixes
It does not contain the read-only fd data inconsistency fix, which Al
didn't like. I'll leave that to the next year..."
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: (36 commits)
ovl: fix reStructuredText syntax errors in documentation
ovl: fix return value of ovl_fill_super
ovl: clean up kstat usage
ovl: fold ovl_copy_up_truncate() into ovl_copy_up()
ovl: create directories inside merged parent opaque
ovl: opaque cleanup
ovl: show redirect_dir mount option
ovl: allow setting max size of redirect
ovl: allow redirect_dir to default to "on"
ovl: check for emptiness of redirect dir
ovl: redirect on rename-dir
ovl: lookup redirects
ovl: consolidate lookup for underlying layers
ovl: fix nested overlayfs mount
ovl: check namelen
ovl: split super.c
ovl: use d_is_dir()
ovl: simplify lookup
ovl: check lower existence of rename target
ovl: rename: simplify handling of lower/merged directory
...
Pull vfs updates from Al Viro:
- more ->d_init() stuff (work.dcache)
- pathname resolution cleanups (work.namei)
- a few missing iov_iter primitives - copy_from_iter_full() and
friends. Either copy the full requested amount, advance the iterator
and return true, or fail, return false and do _not_ advance the
iterator. Quite a few open-coded callers converted (and became more
readable and harder to fuck up that way) (work.iov_iter)
- several assorted patches, the big one being logfs removal
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
logfs: remove from tree
vfs: fix put_compat_statfs64() does not handle errors
namei: fold should_follow_link() with the step into not-followed link
namei: pass both WALK_GET and WALK_MORE to should_follow_link()
namei: invert WALK_PUT logics
namei: shift interpretation of LOOKUP_FOLLOW inside should_follow_link()
namei: saner calling conventions for mountpoint_last()
namei.c: get rid of user_path_parent()
switch getfrag callbacks to ..._full() primitives
make skb_add_data,{_nocache}() and skb_copy_to_page_nocache() advance only on success
[iov_iter] new primitives - copy_from_iter_full() and friends
don't open-code file_inode()
ceph: switch to use of ->d_init()
ceph: unify dentry_operations instances
lustre: switch to use of ->d_init()
If kcalloc() failed, the return value of ovl_fill_super() is -EINVAL,
not -ENOMEM. So this patch sets this value to -ENOMEM before calling
kcalloc(), and sets it back to -EINVAL after calling kcalloc().
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
FWIW, there's a bit of abuse of struct kstat in overlayfs object
creation paths - for one thing, it ends up with a very small subset
of struct kstat (mode + rdev), for another it also needs link in
case of symlinks and ends up passing it separately.
IMO it would be better to introduce a separate object for that.
In principle, we might even lift that thing into general API and switch
->mkdir()/->mknod()/->symlink() to identical calling conventions. Hell
knows, perhaps ->create() as well...
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The benefit of making directories opaque on creation is that lookups can
stop short when they reach the original created directory, instead of
continue lookup the entire depth of parent directory stack.
The best case is overlay with N layers, performing lookup for first level
directory, which exists only in upper. In that case, there will be only
one lookup instead of N.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
oe->opaque is set for
a) whiteouts
b) directories having the "trusted.overlay.opaque" xattr
Case b can be simplified, since setting the xattr always implies setting
oe->opaque. Also once set, the opaque flag is never cleared.
Don't need to set opaque flag for non-directories.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Add a module option to allow tuning the max size of absolute redirects.
Default is 256.
Size of relative redirects is naturally limited by the the underlying
filesystem's max filename length (usually 255).
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This patch introduces a kernel config option and a module param. Both can
be used independently to turn the default value of redirect_dir on or off.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Before introducing redirect_dir feature, the condition
!ovl_lower_positive(dentry) for a directory, implied that it is a pure
upper directory, which may be removed if empty.
Now that directory can be redirect, it is possible that upper does not
cover any lower (i.e. !ovl_lower_positive(dentry)), but the directory is a
merge (with redirected path) and maybe non empty.
Check for this case in ovl_remove_upper().
This change fixes the following test case from rename-pop-dir.py
of unionmount-testsuite:
"""Remove dir and rename old name"""
d = ctx.non_empty_dir()
d2 = ctx.no_dir()
ctx.rmdir(d, err=ENOTEMPTY)
ctx.rename(d, d2)
ctx.rmdir(d, err=ENOENT)
ctx.rmdir(d2, err=ENOTEMPTY)
./run --ov rename-pop-dir
/mnt/a/no_dir103: Expected error (Directory not empty) was not produced
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Current code returns EXDEV when a directory would need to be copied up to
move. We could copy up the directory tree in this case, but there's
another, simpler solution: point to old lower directory from moved upper
directory.
This is achieved with a "trusted.overlay.redirect" xattr storing the path
relative to the root of the overlay. After such attribute has been set,
the directory can be moved without further actions required.
This is a backward incompatible feature, old kernels won't be able to
correctly mount an overlay containing redirected directories.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
If a directory has the "trusted.overlay.redirect" xattr, it means that the
value of the xattr should be used to find the underlying directory on the
next lower layer.
The redirect may be relative or absolute. Absolute redirects begin with a
slash.
A relative redirect means: instead of the current dentry's name use the
value of the redirect to find the directory in the next lower
layer. Relative redirects must not contain a slash.
An absolute redirect means: look up the directory relative to the root of
the overlay using the value of the redirect in the next lower layer.
Redirects work on lower layers as well.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Use a common helper for lookup of upper and lower layers. This paves the
way for looking up directory redirects.
No functional change.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When the upper overlayfs checks "trusted.overlay.*" xattr on the underlying
overlayfs mount, it gets -EPERM, which confuses the upper overlayfs.
Fix this by returning -EOPNOTSUPP instead of -EPERM from
ovl_own_xattr_get() and ovl_own_xattr_set(). This behavior is consistent
with the behavior of ovl_listxattr(), which filters out the private
overlayfs xattrs.
Note: nested overlays are deprecated. But this change makes sense
regardless: these xattrs are private to the overlay and should always be
hidden. Hence getting and setting them should indicate this.
[SzMi: Use EOPNOTSUPP instead of ENODATA and use it for both getting and
setting "trusted.overlay." xattrs. This is a perfectly valid error code
for "we don't support this prefix", which is the case here.]
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We already calculate f_namelen in statfs as the maximum of the name lengths
provided by the filesystems taking part in the overlay.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
fs/overlayfs/super.c is the biggest of the overlayfs source files and it
contains various utility functions as well as the rather complicated lookup
code. Split these parts out to separate files.
Before:
1446 fs/overlayfs/super.c
After:
919 fs/overlayfs/super.c
267 fs/overlayfs/namei.c
235 fs/overlayfs/util.c
51 fs/overlayfs/ovl_entry.h
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
If encountering a non-directory, then stop looking at lower layers.
In this case the oe->opaque flag is not set anymore, which doesn't matter
since existence of lower file is now checked at remove/rename time.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Check if something exists on the lower layer(s) under the target or rename
to decide if directory needs to be marked "opaque".
Marking opaque is done before the rename, and on failure the marking was
undone. Also the opaque xattr was removed if the target didn't cover
anything.
This patch changes behavior so that removal of "opaque" is not done in
either of the above cases. This means that directory may have the opaque
flag even if it doesn't cover anything. However this shouldn't affect the
performance or semantics of the overalay, while simplifying the code.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
d_is_dir() is safe to call on a negative dentry. Use this fact to simplify
handling of the lower or merged directories.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Currently ovl_lookup() checks existence of lower file even if there's a
non-directory on upper (which is always opaque). This is done so that
remove can decide whether a whiteout is needed or not.
It would be better to defer this check to unlink, since most of the time
the gathered information about opaqueness will be unused.
This adds a helper ovl_lower_positive() that checks if there's anything on
the lower layer(s).
The following patches also introduce changes to how the "opaque" attribute
is updated on directories: this attribute is added when the directory is
creted or moved over a whiteout or object covering something on the lower
layer. However following changes will allow the attribute to remain on the
directory after being moved, even if the new location doesn't cover
anything. Because of this, we need to check lower layers even for opaque
directories, so that whiteout is only created when necessary.
This function will later be also used to decide about marking a directory
opaque, so deal with negative dentries as well. When dealing with
negative, it's enough to check for being a whiteout
If the dentry is positive but not upper then it also obviously needs
whiteout/opaque.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Since commit 07a2daab49 ("ovl: Copy up underlying inode's ->i_mode to
overlay inode") sticky checking on overlay inode is performed by the vfs,
so checking against sticky on underlying inode is not needed.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This is redundant, the vfs already performed this check (and was broken,
see commit 9409e22acd ("vfs: rename: check backing inode being equal")).
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
No sense in opening special files on the underlying layers, they work just
as well if opened on the overlay.
Side effect is that it's no longer possible to connect one side of a pipe
opened on overlayfs with the other side opened on the underlying layer.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When copying up within the same fs, try to use vfs_clone_file_range().
This is very efficient when lower and upper are on the same fs
with file reflink support. If vfs_clone_file_range() fails for any
reason, copy up falls back to the regular data copy code.
Tested correct behavior when lower and upper are on:
1. same ext4 (copy)
2. same xfs + reflink patches + mkfs.xfs (copy)
3. same xfs + reflink patches + mkfs.xfs -m reflink=1 (reflink)
4. different xfs + reflink patches + mkfs.xfs -m reflink=1 (copy)
For comparison, on my laptop, xfstest overlay/001 (copy up of large
sparse files) takes less than 1 second in the xfs reflink setup vs.
25 seconds on the rest of the setups.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This reverts commit 03bea60409.
Commit 4d0c5ba2ff ("vfs: do get_write_access() on upper layer of
overlayfs") makes the writecount checks inside overlayfs superfluous, the
file is already copied up and write access acquired on the upper inode when
ovl_setattr is called with ATTR_SIZE.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
If .readlink == NULL implies generic_readlink().
Generated by:
to_del="\.readlink.*=.*generic_readlink"
for i in `git grep -l $to_del`; do sed -i "/$to_del"/d $i; done
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Handling of recursion in d_real() is completely broken. Recursion is only
done in the 'inode != NULL' case. But when opening the file we have
'inode == NULL' hence d_real() will return an overlay dentry. This won't
work since overlayfs doesn't define its own file operations, so all file
ops will fail.
Fix by doing the recursion first and the check against the inode second.
Bash script to reproduce the issue written by Quentin:
- 8< - - - - - 8< - - - - - 8< - - - - - 8< - - - -
tmpdir=$(mktemp -d)
pushd ${tmpdir}
mkdir -p {upper,lower,work}
echo -n 'rocks' > lower/ksplice
mount -t overlay level_zero upper -o lowerdir=lower,upperdir=upper,workdir=work
cat upper/ksplice
tmpdir2=$(mktemp -d)
pushd ${tmpdir2}
mkdir -p {upper,work}
mount -t overlay level_one upper -o lowerdir=${tmpdir}/upper,upperdir=upper,workdir=work
ls -l upper/ksplice
cat upper/ksplice
- 8< - - - - - 8< - - - - - 8< - - - - - 8< - - - -
Reported-by: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 2d902671ce ("vfs: merge .d_select_inode() into .d_real()")
Cc: <stable@vger.kernel.org> # v4.8+
Make sure the copied up file hits the disk before renaming to the final
destination. If this is not done then the copy-up may corrupt the data in
the file in case of a crash.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org>
tmpfs doesn't have ->get_acl() because it only uses cached acls.
This fixes the acl tests in pjdfstest when tmpfs is used as the upper layer
of the overlay.
Reported-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 39a25b2b37 ("ovl: define ->get_acl() for overlay inodes")
Cc: <stable@vger.kernel.org> # v4.8
This change fixes xfstest generic/375, which failed to clear the
setgid bit in the following test case on overlayfs:
touch $testfile
chown 100:100 $testfile
chmod 2755 $testfile
_runas -u 100 -g 101 -- setfacl -m u::rwx,g::rwx,o::rwx $testfile
Reported-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Tested-by: Amir Goldstein <amir73il@gmail.com>
Fixes: d837a49bd5 ("ovl: fix POSIX ACL setting")
Cc: <stable@vger.kernel.org> # v4.8
Pull more misc uaccess and vfs updates from Al Viro:
"The rest of the stuff from -next (more uaccess work) + assorted fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
score: traps: Add missing include file to fix build error
fs/super.c: don't fool lockdep in freeze_super() and thaw_super() paths
fs/super.c: fix race between freeze_super() and thaw_super()
overlayfs: Fix setting IOP_XATTR flag
iov_iter: kernel-doc import_iovec() and rw_copy_check_uvector()
blackfin: no access_ok() for __copy_{to,from}_user()
arm64: don't zero in __copy_from_user{,_inatomic}
arm: don't zero in __copy_from_user_inatomic()/__copy_from_user()
arc: don't leak bits of kernel stack into coredump
alpha: get rid of tail-zeroing in __copy_user()
Pull overlayfs updates from Miklos Szeredi:
"This update contains fixes to the "use mounter's permission to access
underlying layers" area, and miscellaneous other fixes and cleanups.
No new features this time"
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: use vfs_get_link()
vfs: add vfs_get_link() helper
ovl: use generic_readlink
ovl: explain error values when removing acl from workdir
ovl: Fix info leak in ovl_lookup_temp()
ovl: during copy up, switch to mounter's creds early
ovl: lookup: do getxattr with mounter's permission
ovl: copy_up_xattr(): use strnlen
ovl_fill_super calls ovl_new_inode to create a root inode for the new
superblock before initializing sb->s_xattr. This wrongly causes
IOP_XATTR to be cleared in i_opflags of the new inode, causing SELinux
to log the following message:
SELinux: (dev overlay, type overlay) has no xattr support
Fix this by initializing sb->s_xattr and similar fields before calling
ovl_new_inode.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Resulting in a complete removal of a function basically implementing the
inverse of vfs_readlink().
As a bonus, now the proper security hook is also called.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
All filesystems that are backers for overlayfs would also use
generic_readlink(). Move this logic to the overlay itself, which is a nice
cleanup.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Pull more vfs updates from Al Viro:
">rename2() work from Miklos + current_time() from Deepa"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: Replace current_fs_time() with current_time()
fs: Replace CURRENT_TIME_SEC with current_time() for inode timestamps
fs: Replace CURRENT_TIME with current_time() for inode timestamps
fs: proc: Delete inode time initializations in proc_alloc_inode()
vfs: Add current_time() api
vfs: add note about i_op->rename changes to porting
fs: rename "rename2" i_op to "rename"
vfs: remove unused i_op->rename
fs: make remaining filesystems use .rename2
libfs: support RENAME_NOREPLACE in simple_rename()
fs: support RENAME_NOREPLACE for local filesystems
ncpfs: fix unused variable warning
Pull vfs xattr updates from Al Viro:
"xattr stuff from Andreas
This completes the switch to xattr_handler ->get()/->set() from
->getxattr/->setxattr/->removexattr"
* 'work.xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: Remove {get,set,remove}xattr inode operations
xattr: Stop calling {get,set,remove}xattr inode operations
vfs: Check for the IOP_XATTR flag in listxattr
xattr: Add __vfs_{get,set,remove}xattr helpers
libfs: Use IOP_XATTR flag for empty directory handling
vfs: Use IOP_XATTR flag for bad-inode handling
vfs: Add IOP_XATTR inode operations flag
vfs: Move xattr_resolve_name to the front of fs/xattr.c
ecryptfs: Switch to generic xattr handlers
sockfs: Get rid of getxattr iop
sockfs: getxattr: Fail with -EOPNOTSUPP for invalid attribute names
kernfs: Switch to generic xattr handlers
hfs: Switch to generic xattr handlers
jffs2: Remove jffs2_{get,set,remove}xattr macros
xattr: Remove unnecessary NULL attribute name check
Pull misc vfs updates from Al Viro:
"Assorted misc bits and pieces.
There are several single-topic branches left after this (rename2
series from Miklos, current_time series from Deepa Dinamani, xattr
series from Andreas, uaccess stuff from from me) and I'd prefer to
send those separately"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (39 commits)
proc: switch auxv to use of __mem_open()
hpfs: support FIEMAP
cifs: get rid of unused arguments of CIFSSMBWrite()
posix_acl: uapi header split
posix_acl: xattr representation cleanups
fs/aio.c: eliminate redundant loads in put_aio_ring_file
fs/internal.h: add const to ns_dentry_operations declaration
compat: remove compat_printk()
fs/buffer.c: make __getblk_slow() static
proc: unsigned file descriptors
fs/file: more unsigned file descriptors
fs: compat: remove redundant check of nr_segs
cachefiles: Fix attempt to read i_blocks after deleting file [ver #2]
cifs: don't use memcpy() to copy struct iov_iter
get rid of separate multipage fault-in primitives
fs: Avoid premature clearing of capabilities
fs: Give dentry to inode_change_ok() instead of inode
fuse: Propagate dentry down to inode_change_ok()
ceph: Propagate dentry down to inode_change_ok()
xfs: Propagate dentry down to inode_change_ok()
...
These inode operations are no longer used; remove them.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Right now, various places in the kernel check for the existence of
getxattr, setxattr, and removexattr inode operations and directly call
those operations. Switch to helper functions and test for the IOP_XATTR
flag instead.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull security subsystem updates from James Morris:
SELinux/LSM:
- overlayfs support, necessary for container filesystems
LSM:
- finally remove the kernel_module_from_file hook
Smack:
- treat signal delivery as an 'append' operation
TPM:
- lots of bugfixes & updates
Audit:
- new audit data type: LSM_AUDIT_DATA_FILE
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (47 commits)
Revert "tpm/tpm_crb: implement tpm crb idle state"
Revert "tmp/tpm_crb: fix Intel PTT hw bug during idle state"
Revert "tpm/tpm_crb: open code the crb_init into acpi_add"
Revert "tmp/tpm_crb: implement runtime pm for tpm_crb"
lsm,audit,selinux: Introduce a new audit data type LSM_AUDIT_DATA_FILE
tmp/tpm_crb: implement runtime pm for tpm_crb
tpm/tpm_crb: open code the crb_init into acpi_add
tmp/tpm_crb: fix Intel PTT hw bug during idle state
tpm/tpm_crb: implement tpm crb idle state
tpm: add check for minimum buffer size in tpm_transmit()
tpm: constify TPM 1.x header structures
tpm/tpm_crb: fix the over 80 characters checkpatch warring
tpm/tpm_crb: drop useless cpu_to_le32 when writing to registers
tpm/tpm_crb: cache cmd_size register value.
tmp/tpm_crb: drop include to platform_device
tpm/tpm_tis: remove unused itpm variable
tpm_crb: fix incorrect values of cmdReady and goIdle bits
tpm_crb: refine the naming of constants
tpm_crb: remove wmb()'s
tpm_crb: fix crb_req_canceled behavior
...
inode_change_ok() will be resposible for clearing capabilities and IMA
extended attributes and as such will need dentry. Give it as an argument
to inode_change_ok() instead of an inode. Also rename inode_change_ok()
to setattr_prepare() to better relect that it does also some
modifications in addition to checks.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
The function uses the memory address of a struct dentry as unique id.
While the address-based directory entry is only visible to root it is IMHO
still worth fixing since the temporary name does not have to be a kernel
address. It can be any unique number. Replace it by an atomic integer
which is allowed to wrap around.
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org> # v3.18+
Fixes: e9be9d5e76 ("overlay filesystem")
Now, we have the notion that copy up of a file is done with the creds
of mounter of overlay filesystem (as opposed to task). Right now before
we switch creds, we do some vfs_getattr() operations in the context of
task and that itself can fail. We should do that getattr() using the
creds of mounter instead.
So this patch switches to mounter's creds early during copy up process so
that even vfs_getattr() is done with mounter's creds.
Do not call revert_creds() unless we have already called
ovl_override_creds(). [Reported by Arnd Bergmann]
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The getxattr() in ovl_is_opaquedir() was missed when converting all
operations on underlying fs to be done under mounter's permission.
This patch fixes this by moving the ovl_override_creds()/revert_creds() out
from ovl_lookup_real() to ovl_lookup().
Also convert to using vfs_getxattr() instead of directly calling
i_op->getxattr().
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Be defensive about what underlying fs provides us in the returned xattr
list buffer. strlen() may overrun the buffer, so use strnlen() and WARN if
the contents are not properly null terminated.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org>
This patch allows flock, posix locks, ofd locks and leases to work
correctly on overlayfs.
Instead of using the underlying inode for storing lock context use the
overlay inode. This allows locks to be persistent across copy-up.
This is done by introducing locks_inode() helper and using it instead of
file_inode() to get the inode in locking code. For non-overlayfs the two
are equivalent, except for an extra pointer dereference in locks_inode().
Since lock operations are in "struct file_operations" we must also make
sure not to call underlying filesystem's lock operations. Introcude a
super block flag MS_NOREMOTELOCK to this effect.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Acked-by: Jeff Layton <jlayton@poochiereds.net>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Workdir creation fails in latest kernel.
Fix by allowing EOPNOTSUPP as a valid return value from
vfs_removexattr(XATTR_NAME_POSIX_ACL_*). Upper filesystem may not support
ACL and still be perfectly able to support overlayfs.
Reported-by: Martin Ziegler <ziegler@uni-freiburg.de>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: c11b9fdd6a ("ovl: remove posix_acl_default from workdir")
Cc: <stable@vger.kernel.org>
Be defensive about what underlying fs provides us in the returned xattr
list buffer. If it's not properly null terminated, bail out with a warning
insead of BUG.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org>
Now that overlayfs has xattr handlers for iop->{set,remove}xattr, use
those same handlers for iop->getxattr as well.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Setting POSIX acl may also modify the file mode, so need to copy that up to
the overlay inode.
Reported-by: Eryu Guan <eguan@redhat.com>
Fixes: d837a49bd5 ("ovl: fix POSIX ACL setting")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Commit d837a49bd5 ("ovl: fix POSIX ACL setting") switches from
iop->setxattr from ovl_setxattr to generic_setxattr, so switch from
ovl_removexattr to generic_removexattr as well. As far as permission
checking goes, the same rules should apply in either case.
While doing that, rename ovl_setxattr to ovl_xattr_set to indicate that
this is not an iop->setxattr implementation and remove the unused inode
argument.
Move ovl_other_xattr_set above ovl_own_xattr_set so that they match the
order of handlers in ovl_xattr_handlers.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Fixes: d837a49bd5 ("ovl: fix POSIX ACL setting")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Use an ordinary #ifdef to conditionally include the POSIX ACL handlers
in ovl_xattr_handlers, like the other filesystems do. Flag the code
that is now only used conditionally with __maybe_unused.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Trivial fix to spelling mistake in pr_err message.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Some operations (setxattr/chmod) can make the cached acl stale. We either
need to clear overlay's acl cache for the affected inode or prevent acl
caching on the overlay altogether. Preventing caching has the following
advantages:
- no double caching, less memory used
- overlay cache doesn't go stale when fs clears it's own cache
Possible disadvantage is performance loss. If that becomes a problem
get_acl() can be optimized for overlayfs.
This patch disables caching by pre setting i_*acl to a value that
- has bit 0 set, so is_uncached_acl() will return true
- is not equal to ACL_NOT_CACHED, so get_acl() will not overwrite it
The constant -3 was chosen for this purpose.
Fixes: 39a25b2b37 ("ovl: define ->get_acl() for overlay inodes")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Instead of calling ->get_acl() directly, use get_acl() to get the cached
value.
We will have the acl cached on the underlying inode anyway, because we do
permission checking on the both the overlay and the underlying fs.
So, since we already have double caching, this improves performance without
any cost.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When mounting overlayfs it needs a clean "work" directory under the
supplied workdir.
Previously the mount code removed this directory if it already existed and
created a new one. If the removal failed (e.g. directory was not empty)
then it fell back to a read-only mount not using the workdir.
While this has never been reported, it is possible to get a non-empty
"work" dir from a previous mount of overlayfs in case of crash in the
middle of an operation using the work directory.
In this case the left over state should be discarded and the overlay
filesystem will be consistent, guaranteed by the atomicity of operations on
moving to/from the workdir to the upper layer.
This patch implements cleaning out any files left in workdir. It is
implemented using real recursion for simplicity, but the depth is limited
to 2, because the worst case is that of a directory containing whiteouts
under "work".
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org>
Clear out posix acl xattrs on workdir and also reset the mode after
creation so that an inherited sgid bit is cleared.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org>
Setting MS_POSIXACL in sb->s_flags has the side effect of passing mode to
create functions without masking against umask.
Another problem when creating over a whiteout is that the default posix acl
is not inherited from the parent dir (because the real parent dir at the
time of creation is the work directory).
Fix these problems by:
a) If upper fs does not have MS_POSIXACL, then mask mode with umask.
b) If creating over a whiteout, call posix_acl_create() to get the
inherited acls. After creation (but before moving to the final
destination) set these acls on the created file. posix_acl_create() also
updates the file creation mode as appropriate.
Fixes: 39a25b2b37 ("ovl: define ->get_acl() for overlay inodes")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
During a new file creation we need to make sure new file is created with the
right label. New file is created in upper/ so effectively file should get
label as if task had created file in upper/.
We switched to mounter's creds for actual file creation. Also if there is a
whiteout present, then file will be created in work/ dir first and then
renamed in upper. In none of the cases file will be labeled as we want it to
be.
This patch introduces a new hook dentry_create_files_as(), which determines
the label/context dentry will get if it had been created by task in upper
and modify passed set of creds appropriately. Caller makes use of these new
creds for file creation.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
[PM: fix whitespace issues found with checkpatch.pl]
[PM: changes to use stat->mode in ovl_create_or_link()]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Provide a security hook which is called when xattrs of a file are being
copied up. This hook is called once for each xattr and LSM can return
0 if the security module wants the xattr to be copied up, 1 if the
security module wants the xattr to be discarded on the copy, -EOPNOTSUPP
if the security module does not handle/manage the xattr, or a -errno
upon an error.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
[PM: whitespace cleanup for checkpatch.pl]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Provide a security hook to label new file correctly when a file is copied
up from lower layer to upper layer of a overlay/union mount.
This hook can prepare a new set of creds which are suitable for new file
creation during copy up. Caller will use new creds to create file and then
revert back to old creds and release new creds.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
[PM: whitespace cleanup to appease checkpatch.pl]
Signed-off-by: Paul Moore <paul@paul-moore.com>
When a copy up of a directory occurs which has the opaque xattr set, the
xattr remains in the upper directory. The immediate behavior with overlayfs
is that the upper directory is not treated as opaque, however after a
remount the opaque flag is used and upper directory is treated as opaque.
This causes files created in the lower layer to be hidden when using
multiple lower directories.
Fix by not copying up the opaque flag.
To reproduce:
----8<---------8<---------8<---------8<---------8<---------8<----
mkdir -p l/d/s u v w mnt
mount -t overlay overlay -olowerdir=l,upperdir=u,workdir=w mnt
rm -rf mnt/d/
mkdir -p mnt/d/n
umount mnt
mount -t overlay overlay -olowerdir=u:l,upperdir=v,workdir=w mnt
touch mnt/d/foo
umount mnt
mount -t overlay overlay -olowerdir=u:l,upperdir=v,workdir=w mnt
ls mnt/d
----8<---------8<---------8<---------8<---------8<---------8<----
output should be: "foo n"
Reported-by: Derek McGowan <dmcg@drizz.net>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=151291
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org>
The empty checking logic is duplicated in ovl_check_empty_and_clear() and
ovl_remove_and_whiteout(), except the condition for clearing whiteouts is
different:
ovl_check_empty_and_clear() checked for being upper
ovl_remove_and_whiteout() checked for merge OR lower
Move the intersection of those checks (upper AND merge) into
ovl_check_empty_and_clear() and simplify ovl_remove_and_whiteout().
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This does not work and does not make sense. So instead of fixing it
(probably not hard) just disallow.
Reported-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org>
Right now we remove MAY_WRITE/MAY_APPEND bits from mask if realfile is on
lower/. This is done as files on lower will never be written and will be
copied up. But to copy up a file, mounter should have MAY_READ permission
otherwise copy up will fail. So set MAY_READ in mask when MAY_WRITE is
reset.
Dan Walsh noticed this when he did access(lowerfile, W_OK) and it returned
True (context mounts) but when he tried to actually write to file, it
failed as mounter did not have permission on lower file.
[SzM] don't set MAY_READ if only MAY_APPEND is set without MAY_WRITE; this
won't trigger a copy-up.
Reported-by: Dan Walsh <dwalsh@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Right now if file is on lower/, we remove MAY_WRITE/MAY_APPEND bits from
mask as lower/ will never be written and file will be copied up. But this
is not true for special files. These files are not copied up and are opened
in place. So don't dilute the checks for these types of files.
Reported-by: Dan Walsh <dwalsh@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Setting POSIX ACL needs special handling:
1) Some permission checks are done by ->setxattr() which now uses mounter's
creds ("ovl: do operations on underlying file system in mounter's
context"). These permission checks need to be done with current cred as
well.
2) Setting ACL can fail for various reasons. We do not need to copy up in
these cases.
In the mean time switch to using generic_setxattr.
[Arnd Bergmann] Fix link error without POSIX ACL. posix_acl_from_xattr()
doesn't have a 'static inline' implementation when CONFIG_FS_POSIX_ACL is
disabled, and I could not come up with an obvious way to do it.
This instead avoids the link error by defining two sets of ACL operations
and letting the compiler drop one of the two at compile time depending
on CONFIG_FS_POSIX_ACL. This avoids all references to the ACL code,
also leading to smaller code.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Inode attributes are copied up to overlay inode (uid, gid, mode, atime,
mtime, ctime) so generic code using these fields works correcty. If a hard
link is created in overlayfs separate inodes are allocated for each link.
If chmod/chown/etc. is performed on one of the links then the inode
belonging to the other ones won't be updated.
This patch attempts to fix this by sharing inodes for hard links.
Use inode hash (with real inode pointer as a key) to make sure overlay
inodes are shared for hard links on upper. Hard links on lower are still
split (which is not user observable until the copy-up happens, see
Documentation/filesystems/overlayfs.txt under "Non-standard behavior").
The inode is only inserted in the hash if it is non-directoy and upper.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
To get from overlay inode to real inode we currently use 'struct
ovl_entry', which has lifetime connected to overlay dentry. This is okay,
since each overlay dentry had a new overlay inode allocated.
Following patch will break that assumption, so need to leave out ovl_entry.
This patch stores the real inode directly in i_private, with the lowest bit
used to indicate whether the inode is upper or lower.
Lifetime rules remain, using ovl_inode_real() must only be done while
caller holds ref on overlay dentry (and hence on real dentry), or within
RCU protected regions.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fix atime update logic in overlayfs.
This patch adds an i_op->update_time() handler to overlayfs inodes. This
forwards atime updates to the upper layer only. No atime updates are done
on lower layers.
Remove implicit atime updates to underlying files and directories with
O_NOATIME. Remove explicit atime update in ovl_readlink().
Clear atime related mnt flags from cloned upper mount. This means atime
updates are controlled purely by overlayfs mount options.
Reported-by: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When creating directory in workdir, the group/sgid inheritance from the
parent dir was omitted completely. Fix this by calling inode_init_owner()
on overlay inode and using the resulting uid/gid/mode to create the file.
Unfortunately the sgid bit can be stripped off due to umask, so need to
reset the mode in this case in workdir before moving the directory in
place.
Reported-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The fact that we always do permission checking on the overlay inode and
clear MAY_WRITE for checking access to the lower inode allows cruft to be
removed from ovl_permission().
1) "default_permissions" option effectively did generic_permission() on the
overlay inode with i_mode, i_uid and i_gid updated from underlying
filesystem. This is what we do by default now. It did the update using
vfs_getattr() but that's only needed if the underlying filesystem can
change (which is not allowed). We may later introduce a "paranoia_mode"
that verifies that mode/uid/gid are not changed.
2) splitting out the IS_RDONLY() check from inode_permission() also becomes
unnecessary once we remove the MAY_WRITE from the lower inode check.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Now we have two levels of checks in ovl_permission(). overlay inode
is checked with the creds of task while underlying inode is checked
with the creds of mounter.
Looks like mounter does not have to have WRITE access to files on lower/.
So remove the MAY_WRITE from access mask for checks on underlying
lower inode.
This means task should still have the MAY_WRITE permission on lower
inode and mounter is not required to have MAY_WRITE.
It also solves the problem of read only NFS mounts being used as lower.
If __inode_permission(lower_inode, MAY_WRITE) is called on read only
NFS, it fails. By resetting MAY_WRITE, check succeeds and case of
read only NFS shold work with overlay without having to specify any
special mount options (default permission).
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Given we are now doing checks both on overlay inode as well underlying
inode, we should be able to do checks and operations on underlying file
system using mounter's context.
So modify all operations to do checks/operations on underlying dentry/inode
in the context of mounter.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Right now ovl_permission() calls __inode_permission(realinode), to do
permission checks on real inode and no checks are done on overlay inode.
Modify it to do checks both on overlay inode as well as underlying inode.
Checks on overlay inode will be done with the creds of calling task while
checks on underlying inode will be done with the creds of mounter.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Now we are planning to do DAC permission checks on overlay inode
itself. And to make it work, we will need to make sure we can get acls from
underlying inode. So define ->get_acl() for overlay inodes and this in turn
calls into underlying filesystem to get acls, if any.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
ovl_create_upper() and ovl_create_over_whiteout() seem to be sharing some
common code which can be moved into a separate function. No functionality
change.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Previously this was only done for directory inodes. Doing so for all
inodes makes for a nice cleanup in ovl_permission at zero cost.
Inodes are not shared for hard links on the overlay, so this works fine.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The hash salting changes meant that we can no longer reuse the hash in the
overlay dentry to look up the underlying dentry.
Instead of lookup_hash(), use lookup_one_len_unlocked() and swith to
mounter's creds (like we do for all other operations later in the series).
Now the lookup_hash() export introduced in 4.6 by 3c9fe8cdff ("vfs: add
lookup_hash() helper") is unused and can possibly be removed; its
usefulness negated by the hash salting and the idea that mounter's creds
should be used on operations on underlying filesystems.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 8387ff2577 ("vfs: make the string hashes salt the hash")
The upper dentry may become stale before we call ovl_lock_rename_workdir.
For example, someone could (mistakenly or maliciously) manually unlink(2)
it directly from upperdir.
To ensure it is not stale, let's lookup it after ovl_lock_rename_workdir
and and check if it matches the upper dentry.
Essentially, it is the same problem and similar solution as in
commit 11f3710417 ("ovl: verify upper dentry before unlink and rename").
Signed-off-by: Maxim Patlasov <mpatlasov@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org>
Right now when a new overlay inode is created, we initialize overlay
inode's ->i_mode from underlying inode ->i_mode but we retain only
file type bits (S_IFMT) and discard permission bits.
This patch changes it and retains permission bits too. This should allow
overlay to do permission checks on overlay inode itself in task context.
[SzM] It also fixes clearing suid/sgid bits on write.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reported-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 4bacc9c923 ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay")
Cc: <stable@vger.kernel.org>
Before 4bacc9c923 ("overlayfs: Make f_path...") file->f_path pointed to
the underlying file, hence suid/sgid removal on write worked fine.
After that patch file->f_path pointed to the overlay file, and the file
mode bits weren't copied to overlay_inode->i_mode. So the suid/sgid
removal simply stopped working.
The fix is to copy the mode bits, but then ovl_setattr() needs to clear
ATTR_MODE to avoid the BUG() in notify_change(). So do this first, then in
the next patch copy the mode.
Reported-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 4bacc9c923 ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay")
Cc: <stable@vger.kernel.org>
overlay needs underlying fs to support d_type. Recently I put in a
patch in to detect this condition and started failing mount if
underlying fs did not support d_type.
But this breaks existing configurations over kernel upgrade. Those who
are running docker (partially broken configuration) with xfs not
supporting d_type, are surprised that after kernel upgrade docker does
not run anymore.
https://github.com/docker/docker/issues/22937#issuecomment-229881315
So instead of erroring out, detect broken configuration and warn
about it. This should allow existing docker setups to continue
working after kernel upgrade.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 45aebeaf4f ("ovl: Ensure upper filesystem supports d_type")
Cc: <stable@vger.kernel.org> 4.6
The two methods essentially do the same: find the real dentry/inode
belonging to an overlay dentry. The difference is in the usage:
vfs_open() uses ->d_select_inode() and expects the function to perform
copy-up if necessary based on the open flags argument.
file_dentry() uses ->d_real() passing in the overlay dentry as well as the
underlying inode.
vfs_rename() uses ->d_select_inode() but passes zero flags. ->d_real()
with a zero inode would have worked just as well here.
This patch merges the functionality of ->d_select_inode() into ->d_real()
by adding an 'open_flags' argument to the latter.
[Al Viro] Make the signature of d_real() match that of ->d_real() again.
And constify the inode argument, while we are at it.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When truncating a file we should check write access on the underlying
inode. And we should do so on the lower file as well (before copy-up) for
consistency.
Original patch and test case by Aihua Zhang.
- - >o >o - - test.c - - >o >o - -
#include <stdio.h>
#include <errno.h>
#include <unistd.h>
int main(int argc, char *argv[])
{
int ret;
ret = truncate(argv[0], 4096);
if (ret != -1) {
fprintf(stderr, "truncate(argv[0]) should have failed\n");
return 1;
}
if (errno != ETXTBSY) {
perror("truncate(argv[0])");
return 1;
}
return 0;
}
- - >o >o - - >o >o - - >o >o - -
Reported-by: Aihua Zhang <zhangaihua1@huawei.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org>
When using the 'default_permissions' mount option, ovl_permission() on
non-directories was missing a dput(alias), resulting in "BUG Dentry still
in use".
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 8d3095f4ad ("ovl: default permissions")
Cc: <stable@vger.kernel.org> # v4.5+
Fix a regression when creating a file over a whiteout. The new
file/directory needs to use the current fsuid/fsgid, not the ones from the
mounter's credentials.
The refcounting is a bit tricky: prepare_creds() sets an original refcount,
override_creds() gets one more, which revert_cred() drops. So
1) we need to expicitly put the mounter's credentials when overriding
with the updated one
2) we need to put the original ref to the updated creds (and this can
safely be done before revert_creds(), since we'll still have the ref
from override_creds()).
Reported-by: Stephen Smalley <sds@tycho.nsa.gov>
Fixes: 3fe6e52f06 ("ovl: override creds with the ones from the superblock mounter")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
a) ovl_need_xattr_filter() is wrong, we can have multiple lower layers
overlaid, all of which (except the lowest one) honouring the
"trusted.overlay.opaque" xattr. So need to filter everything except the
bottom and the pure-upper layer.
b) we no longer can assume that inode is attached to dentry in
get/setxattr.
This patch unconditionally filters private xattrs to fix both of the above.
Performance impact for get/removexattrs is likely in the noise.
For listxattrs it might be measurable in pathological cases, but I very
much hope nobody cares. If they do, we'll fix it then.
Reported-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: b96809173e ("security_d_instantiate(): move to the point prior to attaching dentry to inode")
Pull vfs fixes from Al Viro:
"Followups to the parallel lookup work:
- update docs
- restore killability of the places that used to take ->i_mutex
killably now that we have down_write_killable() merged
- Additionally, it turns out that I missed a prerequisite for
security_d_instantiate() stuff - ->getxattr() wasn't the only thing
that could be called before dentry is attached to inode; with smack
we needed the same treatment applied to ->setxattr() as well"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
switch ->setxattr() to passing dentry and inode separately
switch xattr_handler->set() to passing dentry and inode separately
restore killability of old mutex_lock_killable(&inode->i_mutex) users
add down_write_killable_nested()
update D/f/directory-locking
smack ->d_instantiate() uses ->setxattr(), so to be able to call it before
we'd hashed the new dentry and attached it to inode, we need ->setxattr()
instances getting the inode as an explicit argument rather than obtaining
it from dentry.
Similar change for ->getxattr() had been done in commit ce23e64. Unlike
->getxattr() (which is used by both selinux and smack instances of
->d_instantiate()) ->setxattr() is used only by smack one and unfortunately
it got missed back then.
Reported-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Tested-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull overlayfs update from Miklos Szeredi:
"The meat of this is a change to use the mounter's credentials for
operations that require elevated privileges (such as whiteout
creation). This fixes behavior under user namespaces as well as being
a nice cleanup"
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: Do d_type check only if work dir creation was successful
ovl: update documentation
ovl: override creds with the ones from the superblock mounter
d_type check requires successful creation of workdir as iterates
through work dir and expects work dir to be present in it. If that's
not the case, this check will always return d_type not supported even
if underlying filesystem might be supporting it.
So don't do this check if work dir creation failed in previous step.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
In user namespace the whiteout creation fails with -EPERM because the
current process isn't capable(CAP_SYS_ADMIN) when setting xattr.
A simple reproducer:
$ mkdir upper lower work merged lower/dir
$ sudo mount -t overlay overlay -olowerdir=lower,upperdir=upper,workdir=work merged
$ unshare -m -p -f -U -r bash
Now as root in the user namespace:
\# touch merged/dir/{1,2,3} # this will force a copy up of lower/dir
\# rm -fR merged/*
This ends up failing with -EPERM after the files in dir has been
correctly deleted:
unlinkat(4, "2", 0) = 0
unlinkat(4, "1", 0) = 0
unlinkat(4, "3", 0) = 0
close(4) = 0
unlinkat(AT_FDCWD, "merged/dir", AT_REMOVEDIR) = -1 EPERM (Operation not
permitted)
Interestingly, if you don't place files in merged/dir you can remove it,
meaning if upper/dir does not exist, creating the char device file works
properly in that same location.
This patch uses ovl_sb_creator_cred() to get the cred struct from the
superblock mounter and override the old cred with these new ones so that
the whiteout creation is possible because overlay is wrong in assuming that
the creds it will get with prepare_creds will be in the initial user
namespace. The old cap_raise game is removed in favor of just overriding
the old cred struct.
This patch also drops from ovl_copy_up_one() the following two lines:
override_cred->fsuid = stat->uid;
override_cred->fsgid = stat->gid;
This is because the correct uid and gid are taken directly with the stat
struct and correctly set with ovl_set_attr().
Signed-off-by: Antonio Murdaca <runcom@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Backmerge to resolve a conflict in ovl_lookup_real();
"ovl_lookup_real(): use lookup_one_len_unlocked()" instead,
but it was too late in the cycle to rebase.
Linus Torvalds