Commit Graph

440 Commits

Author SHA1 Message Date
Ryan Wilson 372254018e [PATCH] driver core: driver_bind attribute returns incorrect value
The manual driver <-> device binding attribute in sysfs doesn't return
the correct value on failure or success of driver_probe_device.
driver_probe_device returns 1 on success (the driver accepted the
device) or 0 on probe failure (when the driver didn't accept the
device but no real error occured). However, the attribute can't just
return 0 or 1, it must return the number of bytes consumed from buf
or an error value. Returning 0 indicates to userspace that nothing
was written (even though the kernel has tried to do the bind/probe and
failed). Returning 1 indicates that only one character was accepted in
which case userspace will re-try the write with a partial string.

A more correct version of driver_bind would return count (to indicate
the entire string was consumed) when driver_probe_device returns 1
and -ENODEV when driver_probe_device returns 0. This patch makes that
change.

Signed-off-by: Ryan Wilson <hap9@epoch.ncsc.mil>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14 11:41:25 -07:00
Jayachandran C a14388904c [PATCH] driver core: fix unnecessary NULL check in drivers/base/class.c
This patch tries to fix an issue in drivers/base/class.c, please
review and apply if correct.

Patch Description:
  "parent_class" is checked for NULL already, so removed the unnecessary
  check.

Signed-off-by: Jayachandran C. <c.jayachandran@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14 11:41:24 -07:00
Alan Stern 0f836ca4c1 [PATCH] driver core: safely unbind drivers for devices not on a bus
This patch (as667) changes the __device_release_driver() routine to
prevent it from crashing when it runs across a device not on any bus.
This seems logical, inasmuch as the corresponding bus_add_device()
routine has an explicit check allowing it to accept such devices.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14 11:41:24 -07:00
Christoph Lameter 54404e72cd [PATCH] Fix NULL pointer dereference in node_read_numastat()
zone_pcp() only returns valid values if the processor is online.

Change node_read_numastat() to only scan online processors.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 06:18:30 -07:00
Alan Stern e041c68341 [PATCH] Notifier chain update: API changes
The kernel's implementation of notifier chains is unsafe.  There is no
protection against entries being added to or removed from a chain while the
chain is in use.  The issues were discussed in this thread:

    http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2

We noticed that notifier chains in the kernel fall into two basic usage
classes:

	"Blocking" chains are always called from a process context
	and the callout routines are allowed to sleep;

	"Atomic" chains can be called from an atomic context and
	the callout routines are not allowed to sleep.

We decided to codify this distinction and make it part of the API.  Therefore
this set of patches introduces three new, parallel APIs: one for blocking
notifiers, one for atomic notifiers, and one for "raw" notifiers (which is
really just the old API under a new name).  New kinds of data structures are
used for the heads of the chains, and new routines are defined for
registration, unregistration, and calling a chain.  The three APIs are
explained in include/linux/notifier.h and their implementation is in
kernel/sys.c.

With atomic and blocking chains, the implementation guarantees that the chain
links will not be corrupted and that chain callers will not get messed up by
entries being added or removed.  For raw chains the implementation provides no
guarantees at all; users of this API must provide their own protections.  (The
idea was that situations may come up where the assumptions of the atomic and
blocking APIs are not appropriate, so it should be possible for users to
handle these things in their own way.)

There are some limitations, which should not be too hard to live with.  For
atomic/blocking chains, registration and unregistration must always be done in
a process context since the chain is protected by a mutex/rwsem.  Also, a
callout routine for a non-raw chain must not try to register or unregister
entries on its own chain.  (This did happen in a couple of places and the code
had to be changed to avoid it.)

Since atomic chains may be called from within an NMI handler, they cannot use
spinlocks for synchronization.  Instead we use RCU.  The overhead falls almost
entirely in the unregister routine, which is okay since unregistration is much
less frequent that calling a chain.

Here is the list of chains that we adjusted and their classifications.  None
of them use the raw API, so for the moment it is only a placeholder.

  ATOMIC CHAINS
  -------------
arch/i386/kernel/traps.c:		i386die_chain
arch/ia64/kernel/traps.c:		ia64die_chain
arch/powerpc/kernel/traps.c:		powerpc_die_chain
arch/sparc64/kernel/traps.c:		sparc64die_chain
arch/x86_64/kernel/traps.c:		die_chain
drivers/char/ipmi/ipmi_si_intf.c:	xaction_notifier_list
kernel/panic.c:				panic_notifier_list
kernel/profile.c:			task_free_notifier
net/bluetooth/hci_core.c:		hci_notifier
net/ipv4/netfilter/ip_conntrack_core.c:	ip_conntrack_chain
net/ipv4/netfilter/ip_conntrack_core.c:	ip_conntrack_expect_chain
net/ipv6/addrconf.c:			inet6addr_chain
net/netfilter/nf_conntrack_core.c:	nf_conntrack_chain
net/netfilter/nf_conntrack_core.c:	nf_conntrack_expect_chain
net/netlink/af_netlink.c:		netlink_chain

  BLOCKING CHAINS
  ---------------
arch/powerpc/platforms/pseries/reconfig.c:	pSeries_reconfig_chain
arch/s390/kernel/process.c:		idle_chain
arch/x86_64/kernel/process.c		idle_notifier
drivers/base/memory.c:			memory_chain
drivers/cpufreq/cpufreq.c		cpufreq_policy_notifier_list
drivers/cpufreq/cpufreq.c		cpufreq_transition_notifier_list
drivers/macintosh/adb.c:		adb_client_list
drivers/macintosh/via-pmu.c		sleep_notifier_list
drivers/macintosh/via-pmu68k.c		sleep_notifier_list
drivers/macintosh/windfarm_core.c	wf_client_list
drivers/usb/core/notify.c		usb_notifier_list
drivers/video/fbmem.c			fb_notifier_list
kernel/cpu.c				cpu_chain
kernel/module.c				module_notify_list
kernel/profile.c			munmap_notifier
kernel/profile.c			task_exit_notifier
kernel/sys.c				reboot_notifier_list
net/core/dev.c				netdev_chain
net/decnet/dn_dev.c:			dnaddr_chain
net/ipv4/devinet.c:			inetaddr_chain

It's possible that some of these classifications are wrong.  If they are,
please let us know or submit a patch to fix them.  Note that any chain that
gets called very frequently should be atomic, because the rwsem read-locking
used for blocking chains is very likely to incur cache misses on SMP systems.
(However, if the chain's callout routines may sleep then the chain cannot be
atomic.)

The patch set was written by Alan Stern and Chandra Seetharaman, incorporating
material written by Keith Owens and suggestions from Paul McKenney and Andrew
Morton.

[jes@sgi.com: restructure the notifier chain initialization macros]
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 08:44:50 -08:00
Ashok Raj 34f361ade2 [PATCH] Check if cpu can be onlined before calling smp_prepare_cpu()
- Moved check for online cpu out of smp_prepare_cpu()

- Moved default declaration of smp_prepare_cpu() to kernel/cpu.c

- Removed lock_cpu_hotplug() from smp_prepare_cpu() to around it, since
  its called from cpu_up() as well now.

- Removed clearing from cpu_present_map during cpu_offline as it breaks
  using cpu_up() directly during a subsequent online operation.

Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Cc: Srivatsa Vaddagiri <vatsa@in.ibm.com>
Cc: "Li, Shaohua" <shaohua.li@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25 08:23:01 -08:00
Rafael J. Wysocki ff4da2e262 [PATCH] swsusp: add check for suspension of X-controlled devices
It is unsafe to suspend devices if the hardware is controlled by X.  Add an
extra check to prevent this from happening.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 07:38:08 -08:00
Linus Torvalds 8b4b6707ee Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial:
  fixed path to moved file in include/linux/device.h
  Fix spelling in E1000_DISABLE_PACKET_SPLIT Kconfig description
  Documentation/dvb/get_dvb_firmware: fix firmware URL
  Documentation: Update to BUG-HUNTING
  Remove superfluous NOTIFY_COOKIE_LEN define
  add "tags" to .gitignore
  Fix "frist", "fisrt", typos
  fix rwlock usage example
  It's UTF-8
2006-03-22 10:58:05 -08:00
Uwe Zeisberger 80682fa9f7 Fix "frist", "fisrt", typos
Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-03-22 00:21:33 +01:00
James Bottomley d04cdb6421 Merge ../linux-2.6 2006-03-21 13:05:45 -06:00
Andrew Morton a29d642a4a [PATCH] get_cpu_sysdev() signedness fix
Doing (int < NR_CPUS) doesn't dtrt if it's negative..

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20 13:42:59 -08:00
Jeff Moyer 30560ba6ed [PATCH] firmware: fix BUG: in fw_realloc_buffer
The fw_realloc_buffer routine does not handle an increase in buffer size of
more than 4k.  It's not clear to me why it expects that it will only get an
extra 4k of data.  The attached patch modifies fw_realloc_buffer to vmalloc
as much memory as is requested, instead of what we previously had + 4k.

I've tested this on my laptop, which would crash occaisionally on boot
without the patch.  With the patch, it hasn't crashed, but I can't be
certain that this code path is exercised.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20 13:42:58 -08:00
Jes Sorensen 58383af629 [PATCH] kobj_map semaphore to mutex conversion
Convert the kobj_map code to use a mutex instead of a semaphore.  It
converts the single two users as well, genhd.c and char_dev.c.

Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20 13:42:58 -08:00
David Vrabel 305b3228f9 [PATCH] driver core: platform_get_irq*(): return -ENXIO on error
platform_get_irq*() cannot return 0 on error as 0 is a valid IRQ on some
platforms, return -ENXIO instead.

Signed-off-by: David Vrabel <dvrabel@arcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20 13:42:57 -08:00
Moore, Eric e935d5da8e [SCSI] drivers/base/bus.c - export reprobe
Adding support for exposing hidden raid components for sg
interface. The sdev->no_uld_attach flag will set set accordingly.

The sas module supports adding/removing raid volumes using online
storage management application interface.

This patch was provided to me by Christoph Hellwig.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-14 12:50:44 -06:00
Al Viro be7ee9b2f5 [PATCH] fix __user annotations in drivers/base/memory.c
sysfs store doesn't deal with userland pointers

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-02-07 20:58:04 -05:00
Pavel Machek 022f7b07bf [PATCH] Fix Userspace interface breakage in power/state
Prevent passing invalid values down to the drivers.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-02-06 12:17:17 -08:00
Adrian Bunk f67d115fe4 [PATCH] drivers/base/: proper prototypes
This patch contains the following changes:
- move prototypes to base.h
- sys.c should #include "base.h" for getting the prototype of it's
  global function system_bus_init()

Note that hidden in this patch there's a bugfix:

Caller and callee disagreed regarding the return type of
sysdev_shutdown().

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-02-06 12:17:17 -08:00
Russell King e485981e52 [PATCH] Fix compiler warning in driver core for CONFIG_HOTPLUG=N
FYI, while running a build test, I found:

drivers/base/bus.c:166: warning: `driver_attr_unbind' defined but not used
drivers/base/bus.c:194: warning: `driver_attr_bind' defined but not used

Looks like these two attributes and supporting functions want to be
#ifdef HOTPLUG'd

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-02-06 12:17:17 -08:00
Zhang, Yanmin 69dcc99199 [PATCH] Export cpu topology in sysfs
The patch implements cpu topology exportation by sysfs.

Items (attributes) are similar to /proc/cpuinfo.

1) /sys/devices/system/cpu/cpuX/topology/physical_package_id:
	represent the physical package id of  cpu X;
2) /sys/devices/system/cpu/cpuX/topology/core_id:
	represent the cpu core id to cpu X;
3) /sys/devices/system/cpu/cpuX/topology/thread_siblings:
	represent the thread siblings to cpu X in the same core;
4) /sys/devices/system/cpu/cpuX/topology/core_siblings:
	represent the thread siblings to cpu X in the same physical package;

To implement it in an architecture-neutral way, a new source file,
driver/base/topology.c, is to export the 5 attributes.

If one architecture wants to support this feature, it just needs to
implement 4 defines, typically in file include/asm-XXX/topology.h.
The 4 defines are:
#define topology_physical_package_id(cpu)
#define topology_core_id(cpu)
#define topology_thread_siblings(cpu)
#define topology_core_siblings(cpu)

The type of **_id is int.
The type of siblings is cpumask_t.

To be consistent on all architectures, the 4 attributes should have
deafult values if their values are unavailable. Below is the rule.

1) physical_package_id: If cpu has no physical package id, -1 is the
default value.

2) core_id: If cpu doesn't support multi-core, its core id is 0.

3) thread_siblings: Just include itself, if the cpu doesn't support
HT/multi-thread.

4) core_siblings: Just include itself, if the cpu doesn't support
multi-core and HT/Multi-thread.

So be careful when declaring the 4 defines in include/asm-XXX/topology.h.

If an attribute isn't defined on an architecture, it won't be exported.

Thank Nathan, Greg, Andi, Paul and Venki.

The patch provides defines for i386/x86_64/ia64.

Signed-off-by: Zhang, Yanmin <yanmin.zhang@intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03 08:32:09 -08:00
Arjan van de Ven 858119e159 [PATCH] Unlinline a bunch of other functions
Remove the "inline" keyword from a bunch of big functions in the kernel with
the goal of shrinking it by 30kb to 40kb

Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14 18:27:06 -08:00
Michael Richardson 9c08a938ce [PATCH] device_shutdown can loop if the driver frees itself
This patch changes device_shutdown() to use the newly introduced safe
reverse list traversal.  We experienced loops on system reboot if we had
removed and re-inserted our device from the device list.

We noticed this problem on PPC405. Our PCI IDE device comes and goes a lot.

Our hypothesis was that there was a loop caused by the driver->shutdown
freeing memory.  It is possible that we do something wrong as well, but
being unable to reboot is kind of nasty.

Signed-off-by: Michael Richardson <mcr@marajade.sandelman.ca>
Cc: Patrick Mochel <mochel@digitalimplant.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-13 11:26:12 -08:00
Jean Delvare 2d7b5a70e0 [PATCH] platform-device-del typo fix
Please fold this typo fix into platform-device-del.patch, as was
discussed earlier on LKML:
  http://lkml.org/lkml/2005/12/10/76

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-13 11:26:11 -08:00
Russell King 594c8281f9 [PATCH] Add bus_type probe, remove, shutdown methods.
Add bus_type probe, remove and shutdown methods to replace the
corresponding methods in struct device_driver.  This matches
the way we handle the suspend/resume methods.

Since the bus methods override the device_driver methods, warn
if a device driver is registered whose methods will not be
called.

The long-term idea is to remove the device_driver methods entirely.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-13 11:26:04 -08:00
Randy.Dunlap c59ede7b78 [PATCH] move capable() to capability.h
- Move capable() from sched.h to capability.h;

- Use <linux/capability.h> where capable() is used
	(in include/, block/, ipc/, kernel/, a few drivers/,
	mm/, security/, & sound/;
	many more drivers/ to go)

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 18:42:13 -08:00
Martin Waitz 0863afb32b [PATCH] DocBook: fix kernel-doc comments
Fix typos in comments to remove kernel-doc warnings.

Signed-off-by: Martin Waitz <tali@admingilde.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 08:01:53 -08:00
Vivek Goyal 35ed319a36 [PATCH] kdump: export per cpu crash notes pointer through sysfs (fix)
Removes the call to get_cpu() and put_cpu() as it is not required.

Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 08:01:26 -08:00
Vivek Goyal 51be5606d9 [PATCH] kdump: export per cpu crash notes pointer through sysfs
- Kexec on panic functionality allocates memory for saving cpu registers in
  case of system crash event.  Address of this allocated memory needs to be
  exported to user space, which is used by kexec-tools.

- Previously, a single /sys/kernel/crash_notes entry was being exported as
  memory allocated was a single continuous array.  Now memory allocation being
  dyanmic and per cpu based, address of per cpu buffer is exported through
  "/sys/devices/system/cpu/cpuX/crash_notes"

Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 08:01:26 -08:00
Andy Whitcroft 900b2b463d [PATCH] memhotplug: register_memory should be global
register_memory is global and declared so in linux/memory.h.  Update the
HOTPLUG specific definition to match.  This fixes a compile warning when
HOTPLUG is enabled.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:33:22 -08:00
Andy Whitcroft 98a38ebdda [PATCH] memhotplug: register_ and unregister_memory_notifier should be global
Both register_memory_notifer and unregister_memory_notifier are global and
declared so in linux/memory.h.  Update the HOTPLUG specific definitions to
match.  This fixes a compile warning when HOTPLUG is enabled.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:33:21 -08:00
Dominik Brodowski 8e9e793d68 [PATCH] pcmcia: merge suspend into device model
Merge the suspend and resume methods for 16-bit PCMCIA cards into the
device model -- for both runtime power management and suspend to ram/disk.

Bugfix in ds.c by Richard Purdie
Signed-Off-By: Richard Purdie <rpurdie@rpsys.net>

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-06 00:02:03 +01:00
Adrian Bunk 1f1bf132d8 [PATCH] drivers/base/power/runtime.c: #if 0 dpm_set_power_state()
This patch #if 0's an unused global function.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04 16:18:10 -08:00
Greg Kroah-Hartman 874c6241b2 [PATCH] Driver core: only all userspace bind/unbind if CONFIG_HOTPLUG is enabled
Thanks to drivers making their id tables __devinit, we can't allow
userspace to bind or unbind drivers from devices manually through sysfs.
So we only allow this if CONFIG_HOTPLUG is enabled.

Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04 16:18:09 -08:00
Dmitry Torokhov a96b204208 [PATCH] Driver Core: Rearrange exports in platform.c
Driver core: rearrange exports in platform.c

The new way is to specify export right after symbol definition.
Rearrange exports to follow new style to avoid mixing two styles
in one file.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04 16:18:09 -08:00
Dmitry Torokhov 93ce3061be [PATCH] Driver Core: Add platform_device_del()
Driver core: add platform_device_del function

Having platform_device_del90 allows more straightforward error
handling code in drivers registering platform devices.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04 16:18:09 -08:00
Kumar Gala d960bb4db9 [PATCH] Allow overlapping resources for platform devices
There are cases in which a device's memory mapped registers overlap
with another device's memory mapped registers.  On several PowerPC
devices this occurs for the MDIO bus, whose registers tended to overlap
with one of the ethernet controllers.

By switching from request_resource to insert_resource we can register
the MDIO bus as a proper platform device and not hack around how we
handle its memory mapped registers.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04 16:18:08 -08:00
Alan Stern bf74ad5bc4 [PATCH] Hold the device's parent's lock during probe and remove
This patch (as604) makes the driver core hold a device's parent's lock
as well as the device's lock during calls to the probe and remove
methods in a driver.  This facility is needed by USB device drivers,
owing to the peculiar way USB devices work:

	A device provides multiple interfaces, and drivers are bound
	to interfaces rather than to devices;

	Nevertheless a reset, reset-configuration, suspend, or resume
	affects the entire device and requires the caller to hold the
	lock for the device, not just a lock for one of the interfaces.

Since a USB driver's probe method is always called with the interface
lock held, the locking order rules (always lock parent before child)
prevent these methods from acquiring the device lock.  The solution
provided here is to call all probe and remove methods, for all devices
(not just USB), with the parent lock already acquired.

Although currently only the USB subsystem requires these changes, people
have mentioned in prior discussion that the overhead of acquiring an
extra semaphore in all the prove/remove sequences is not overly large.

Up to now, the USB core has been using its own set of private
semaphores.  A followup patch will remove them, relying entirely on the
device semaphores provided by the driver core.

The code paths affected by this patch are:

	device_add and device_del: The USB core already holds the parent
	lock, so no actual change is needed.

	driver_register and driver_unregister: The driver core will now
	lock both the parent and the device before probing or removing.

	driver_bind and driver_unbind (in sysfs): These routines will
	now lock both the parent and the device before binding or
	unbinding.

	bus_rescan_devices: The helper routine will lock the parent
	before probing a device.

I have not tested this patch for conflicts with other subsystems.  As
far as I can see, the only possibility of conflict would lie in the
bus_rescan_devices pathway, and it seems pretty remote.  Nevertheless,
it would be good for this to get a lot of testing in -mm.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04 16:18:08 -08:00
Kay Sievers 312c004d36 [PATCH] driver core: replace "hotplug" by "uevent"
Leave the overloaded "hotplug" word to susbsystems which are handling
real devices. The driver core does not "plug" anything, it just exports
the state to userspace and generates events.

Signed-off-by: Kay Sievers <kay.sievers@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04 16:18:08 -08:00
Adrian Bunk 2f40fb72a2 [PATCH] drivers/base/memory.c: unexport the static (sic) memory_sysdev_class
We can't export a static struct to modules.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-15 14:22:45 -08:00
Alan Stern 2b08c8d046 [PATCH] Small fixes to driver core
This patch (as603) makes a few small fixes to the driver core:

Change spin_lock_irq for a klist lock to spin_lock;

Fix reference count leaks;

Minor spelling and formatting changes.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-23 23:03:06 -08:00
matthieu castet 113fab1386 [PATCH] fix leaks in request_firmware_nowait
Wasn't checking return error and forgot to free in some case.

Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-13 18:14:17 -08:00
Russell King 00d3dcdd96 [DRIVER MODEL] Add platform_driver
Introduce struct platform_driver.  This allows the platform device
driver methods to be passed a platform_device structure instead of
instead of a plain device structure, and therefore requiring casting
in every platform driver.

We introduce this in such a way that any existing platform drivers
registered directly via driver_register continue to work as before,
thereby allowing a gradual conversion to the new platform_driver
methods.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-09 17:23:39 +00:00
Tim Schmielau 8c65b4a604 [PATCH] fix remaining missing includes
Fix more include file problems that surfaced since I submitted the previous
fix-missing-includes.patch.  This should now allow not to include sched.h
from module.h, which is done by a followup patch.

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:41 -08:00
Russell King 37c12e7497 [DRIVER MODEL] Improved dynamically allocated platform_device interface
Re-jig the simple platform device support to allow private data
to be attached to a platform device, as well as allowing the
parent device to be set.

Example usage:

	pdev = platform_device_alloc("mydev", id);
	if (pdev) {
		err = platform_device_add_resources(pdev, &resources,
						    ARRAY_SIZE(resources));
		if (err == 0)
			err = platform_device_add_data(pdev, &platform_data,
						       sizeof(platform_data));
		if (err == 0)
			err = platform_device_add(pdev);
	} else {
		err = -ENOMEM;
	}
	if (err)
		platform_device_put(pdev);

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-05 21:19:33 +00:00
Linus Torvalds 4fd5f8267d Merge master.kernel.org:/home/rmk/linux-2.6-drvmodel
Manual #include fixups for clashes - there may be some unnecessary
2005-10-31 07:32:56 -08:00
Tim Schmielau 4e57b68178 [PATCH] fix missing includes
I recently picked up my older work to remove unnecessary #includes of
sched.h, starting from a patch by Dave Jones to not include sched.h
from module.h. This reduces the number of indirect includes of sched.h
by ~300. Another ~400 pointless direct includes can be removed after
this disentangling (patch to follow later).
However, quite a few indirect includes need to be fixed up for this.

In order to feed the patches through -mm with as little disturbance as
possible, I've split out the fixes I accumulated up to now (complete for
i386 and x86_64, more archs to follow later) and post them before the real
patch.  This way this large part of the patch is kept simple with only
adding #includes, and all hunks are independent of each other.  So if any
hunk rejects or gets in the way of other patches, just drop it.  My scripts
will pick it up again in the next round.

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:32 -08:00
Randy Dunlap eb8e317998 [PATCH] firmware: fix all kernel-doc warnings
Convert existing function docs to kernel-doc format.  Eliminate all
kernel-doc warnings.  Fix some doc typos and a little whitespace cleanup.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:25 -08:00
Ashok Raj ad74557a49 [PATCH] introduce get_cpu_sysdev() to retrieve a sysfs entry for a cpu.
Some modules creating sysfs entries under /sys/devices/system/cpu/cpuX/
need to know the parent sysfs entry to make devices under them.  This will
just return the sysfs entry for a given cpu.

sysfs entries showing under each cpu sysfs can be easily created if such
entries can be created by registering a sysfs driver for cpuclass.  The
issue is when the entry is created the CPU may not be online, hence we
would need to defer the creation until the online notification comes.

Current users: cache entries for Intel CPU's and cpufreq subsystem.

Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Zwane Mwaikambo <zwane@holomorphy.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:14 -08:00
Dave Hansen 0b0acbec1b [PATCH] memory hotplug: move section_mem_map alloc to sparse.c
This basically keeps up from having to extern __kmalloc_section_memmap().

The vaddr_in_vmalloc_area() helper could go in a vmalloc header, but that
header gets hard to work with, because it needs some arch-specific macros.
Just stick it in here for now, instead of creating another header.

Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Lion Vollnhals <webmaster@schiggl.de>
Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz>
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 21:40:44 -07:00
Dave Hansen 3947be1969 [PATCH] memory hotplug: sysfs and add/remove functions
This adds generic memory add/remove and supporting functions for memory
hotplug into a new file as well as a memory hotplug kernel config option.

Individual architecture patches will follow.

For now, disable memory hotplug when swsusp is enabled.  There's a lot of
churn there right now.  We'll fix it up properly once it calms down.

Signed-off-by: Matt Tolentino <matthew.e.tolentino@intel.com>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 21:40:44 -07:00
Russell King d052d1beff Create platform_device.h to contain all the platform device details.
Convert everyone who uses platform_bus_type to include
linux/platform_device.h.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-29 19:07:23 +01:00
Andrew Morton 9a7834d06d [PATCH] USB: fix pm patches with CONFIG_PM off part 2
With CONFIG_PM=n:

drivers/built-in.o(.text+0x1098c): In function `hub_thread':
drivers/usb/core/hub.c:2673: undefined reference to `.dpm_runtime_resume'
drivers/built-in.o(.text+0x10998):drivers/usb/core/hub.c:2674: undefined reference to `.dpm_runtime_resume'

Please, never ever ever put extern decls into .c files.  Use the darn header
files :(

Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 16:47:52 -07:00
David Brownell 979d5199fe [PATCH] root hub changes (lesser half)
This patch collects various small updates related to root hubs, to shrink
later patches which build on them.

  - For root hub suspend/resume support:
     * Make the existing usb_hcd_resume_root_hub() routine respect pmcore
       locking, exporting and using the dpm_runtime_resume() method.
     * Add a new usb_hcd_suspend_root_hub() to pair with that routine.
       (Essential to make OHCI autosuspend behave again...)
     * HC_SUSPENDED by itself only refers to the root hub's downstream ports.
       So let HCDs see root hub URBs unless the parent device is suspended.

  - Remove an assertion we no longer need (and now, also don't want).

  - Generic suspend/resume updates to work better with swsusp.
     * Ignore the FREEZE vs SUSPEND distinction for hardware; trying to
       use it breaks the swsusp snapshots it's supposed to help (sigh).
     * On resume, mark devices as resumed right away, but then
       do nothing else if the device is marked NOTATTACHED.

These changes shouldn't be very noticable by themselves.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 drivers/base/power/runtime.c |    1
 drivers/usb/core/hcd.c       |   64 ++++++++++++++++++++++++++++++++++++++-----
 drivers/usb/core/hcd.h       |    1
 drivers/usb/core/hub.c       |   45 ++++++++++++++++++++++++------
 drivers/usb/core/usb.c       |   20 +++++++++----
 drivers/usb/core/usb.h       |    1
 6 files changed, 111 insertions(+), 21 deletions(-)
2005-10-28 16:47:40 -07:00
David Brownell e9b7bd4ee7 [PATCH] one less word in struct device
This saves a word from "struct device" ... there's a refcounting mechanism
stub that's rather ineffective (the values are never even tested!), which
can safely be deleted.  With this patch it uses normal device refcounting,
so any potential users of the pm_parent mechanism will be more correct.
(That mechanism is actually unusable for now though; it does nothing.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 drivers/base/power/main.c |   26 +++-----------------------
 include/linux/pm.h        |    1 -
 2 files changed, 3 insertions(+), 24 deletions(-)
2005-10-28 16:47:39 -07:00
Randy Dunlap c41455fbac [PATCH] kernel-doc: drivers/base fixes
driver/base: add missing function parameters; eliminate all warnings.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:56 -07:00
Russell King 9480e307cd [PATCH] DRIVER MODEL: Get rid of the obsolete tri-level suspend/resume callbacks
In PM v1, all devices were called at SUSPEND_DISABLE level.  Then
all devices were called at SUSPEND_SAVE_STATE level, and finally
SUSPEND_POWER_DOWN level.  However, with PM v2, to maintain
compatibility for platform devices, I arranged for the PM v2
suspend/resume callbacks to call the old PM v1 suspend/resume
callbacks three times with each level in order so that existing
drivers continued to work.

Since this is obsolete infrastructure which is no longer necessary,
we can remove it.  Here's an (untested) patch to do exactly that.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:56 -07:00
Ben Dooks a1bdc7aad8 [PATCH] drivers/base - fix sparse warnings
There are a number of sparse warnings from the latest sparse
snapshot being generated from the drivers/base build. The
main culprits are due to the initialisation functions not
being declared in a header file.

Also, the firmware.c file should include <linux/device.h>
to get the prototype of  firmware_register() and
firmware_unregister().

This patch moves the init function declerations from the
init.c file to the base.h, and ensures it is included in
all the relevant c sources. It also adds <linux/device.h>
to the included headers for firmware.c.

The patch does not solve all the sparse errors generated,
but reduces the count significantly.

drivers/base/core.c:161:1: warning: symbol 'devices_subsys' was not declared. Should it be static?
drivers/base/core.c:417:12: warning: symbol 'devices_init' was not declared. Should it be static?
drivers/base/sys.c:253:6: warning: symbol 'sysdev_shutdown' was not declared. Should it be static?
drivers/base/sys.c:326:5: warning: symbol 'sysdev_suspend' was not declared. Should it be static?
drivers/base/sys.c:428:5: warning: symbol 'sysdev_resume' was not declared. Should it be static?
drivers/base/sys.c:450:12: warning: symbol 'system_bus_init' was not declared. Should it be static?
drivers/base/bus.c:133:1: warning: symbol 'bus_subsys' was not declared. Should it be static?
drivers/base/bus.c:667:12: warning: symbol 'buses_init' was not declared. Should it be static?
drivers/base/class.c:759:12: warning: symbol 'classes_init' was not declared. Should it be static?
drivers/base/platform.c:313:12: warning: symbol 'platform_bus_init' was not declared. Should it be static?
drivers/base/cpu.c:110:12: warning: symbol 'cpu_dev_init' was not declared. Should it be static?
drivers/base/firmware.c:17:5: warning: symbol 'firmware_register' was not declared. Should it be static?
drivers/base/firmware.c:23:6: warning: symbol 'firmware_unregister' was not declared. Should it be static?
drivers/base/firmware.c:28:12: warning: symbol 'firmware_init' was not declared. Should it be static?
drivers/base/init.c:28:13: warning: symbol 'driver_init' was not declared. Should it be static?
drivers/base/dmapool.c:174:10: warning: implicit cast from nocast type
drivers/base/attribute_container.c:439:1: warning: symbol 'attribute_container_init' was not declared. Should it be static?
drivers/base/power/runtime.c:76:6: warning: symbol 'dpm_set_power_state' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:55 -07:00
Greg Kroah-Hartman 51d172d5f3 [PATCH] Driver Core: add the ability for class_device structures to be nested
This patch allows struct class_device to be nested, so that another
struct class_device can be the parent of a new one, instead of only
having the struct class be the parent.  This will allow us to
(hopefully) fix up the input and video class subsystem mess.

But please people, don't go crazy and start making huge trees of class
devices, you should only need 2 levels deep to get everything to work
(remember to use a class_interface to get notification of a new class
device being added to the system.)

Oh, this also allows us to have the possibility of potentially, someday,
moving /sys/block into /sys/class.  The main hindrance is that pesky
/dev numberspace issue...

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:51 -07:00
Kay Sievers a7fd67062e [PATCH] add sysfs attr to re-emit device hotplug event
A "coldplug + udevstart" can be simple like this:
  for i in /sys/block/*/*/uevent; do echo 1 > $i; done
  for i in /sys/class/*/*/uevent; do echo 1 > $i; done
  for i in /sys/bus/*/devices/*/uevent; do echo 1 > $i; done

Signed-off-by: Kay Sievers <kay.sievers@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:51 -07:00
Dmitry Torokhov d8539d81ae [PATCH] Driver core: pass interface to class interface methods
Driver core: pass interface to class intreface methods

Pass interface as argument to add() and remove() class interface
methods. This way a subsystem can implement generic add/remove
handlers and then call interface-specific ones.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:51 -07:00
Dmitry Torokhov dbe9035d4f [PATCH] Driver core: send hotplug event before adding class interfaces
Move call to kobject_hotplug() above code that adds interfaces
to a class device, otherwise children's hotplug events may reach
userspace first.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:50 -07:00
David Brownell 0ac85241eb [PATCH] driver model wakeup flags
This is a refresh of an earlier patch to add "wakeup" support to the
PM core model.  This provides per-device bus-neutral control of the
use of wakeup events.

  * "struct device_pm_info" has two bits that are initialized as
    part of setting up the enclosing struct device:
      - "can_wakeup", reflecting hardware capabilities
      - "may_wakeup", the policy setting (when CONFIG_PM)

  * There's a writeable sysfs "wakeup" file, with one of two values:
      - "enabled", when the policy is to allow wakeup
      - "disabled", when the policy is not to allow it
      - "" if the device can't currently issue wakeups

By default, wakeup is enabled on all devices that support it.  If its
driver doesn't support it ... treat it as a bug.  :)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:50 -07:00
Al Viro dd0fc66fb3 [PATCH] gfp flags annotations - part 1
- added typedef unsigned int __nocast gfp_t;

 - replaced __nocast uses for gfp flags with gfp_t - it gives exactly
   the same warnings as far as sparse is concerned, doesn't change
   generated code (from gcc point of view we replaced unsigned int with
   typedef) and documents what's going on far better.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-08 15:00:57 -07:00
Bill Nottingham 3e51377dc4 [PATCH] fix class symlinks in sysfs
The class symlinks in sysfs don't properly handle changing device names.

To demonstrate, rename your network device from eth0 to eth1. Your
pci (or usb, or whatever) device will still have a 'net:eth0' link,
except now it points to /sys/class/net/eth1.

The attached patch makes sure the class symlink name changes when
the class device name changes. It isn't 100% correct, it should be
using sysfs_rename_link. Unfortunately, sysfs_rename_link doesn't exist.

Signed-off-by: Bill Nottingham <notting@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 07:58:24 -07:00
Daniel Ritz 4c898c7f2f [PATCH] Driver Core: fis bus rescan devices race
bus_rescan_devices_helper() does not hold the dev->sem when it checks for
!dev->driver().  device_attach() holds the sem, but calls again
device_bind_driver() even when dev->driver is set.

What happens is that a first device_attach() call (module insertion time)
is on the way binding the device to a driver.  Another thread calls
bus_rescan_devices().  Now when bus_rescan_devices_helper() checks for
dev->driver it is still NULL 'cos the the prior device_attach() is not yet
finished.  But as soon as the first one releases the dev->sem the second
device_attach() tries to rebind the already bound device again.
device_bind_driver() does this blindly which leads to a corrupt
driver->klist_devices list (the device links itself, the head points to the
device).  Later a call to device_release_driver() sets dev->driver to NULL
and breaks the link it has to itself on knode_driver.  Rmmoding the driver
later calls driver_detach() which leads to an endless loop 'cos the list
head in klist_devices still points to the device.  And since dev->driver is
NULL it's stuck with the same device forever.  Boom.  And rmmod hangs.

Very easy to reproduce with new-style pcmcia and a 16bit card.  Just loop
modprobe <pcmcia-modules> ;cardctl eject; rmmod <card driver, pcmcia
modules>.

Easiest fix is to check if the device is already bound to a driver in
device_bind_driver().  This avoids the double binding.

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 07:58:24 -07:00
Jiri Slaby 4aed0644d6 [PATCH] drivers/base/*: use kzalloc instead of kmalloc+memset
Fixes a bunch of memset bugs too.

Signed-off-by: Lion Vollnhals <webmaster@schiggl.de>
Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13 08:22:27 -07:00
Victor Fusco 3a11ec5e50 [PATCH] dmapool: Fix "nocast type" warnings
Fix the sparse warning "implicit cast to nocast type"

Signed-off-by: Victor Fusco <victor@cetuc.puc-rio.br>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 10:06:29 -07:00
Linus Torvalds caf39e87cc [SCSI] Re-do "final klist fixes"
With the previous commit that introduces the klist enhancements, we can
now re-do 2b7d6a8cb9 again.
2005-09-07 18:44:33 -07:00
James Bottomley 34bb61f9dd [PATCH] fix klist semantics for lists which have elements removed on traversal
The problem is that klists claim to provide semantics for safe traversal of
lists which are being modified.  The failure case is when traversal of a
list causes element removal (a fairly common case).  The issue is that
although the list node is refcounted, if it is embedded in an object (which
is universally the case), then the object will be freed regardless of the
klist refcount leading to slab corruption because the klist iterator refers
to the prior element to get the next.

The solution is to make the klist take and release references to the
embedding object meaning that the embedding object won't be released until
the list relinquishes the reference to it.

(akpm: fast-track this because it's needed for the 2.6.13 scsi merge)

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 18:26:54 -07:00
Linus Torvalds df4edad178 [SCSI] Revert "final klist fixes"
Revert commit 2b7d6a8cb9.

The "fix" was known to not even compile.  Duh.  That's not a fix.
That's just stupid.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 17:50:58 -07:00
Linus Torvalds 0481990b75 Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-for-linus-2.6 2005-09-07 17:31:27 -07:00
Abhay Salunke 6e3eaab020 [PATCH] modified firmware_class.c to support no hotplug
Upgrade the request_firmware_nowait function to not start the hotplug
action on a firmware update.

This patch is tested along with dell_rbu driver on i386 and x86-64 systems.

Signed-off-by: Abhay Salunke <Abhay_Salunke@dell.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:26 -07:00
James Bottomley 17fa53da12 Merge by hand (conflicts in sd.c) 2005-09-06 17:52:54 -05:00
James Bottomley d856f1e337 [PATCH] klist: fix klist to have the same klist_add semantics as list_head
at the moment, the list_head semantics are

list_add(node, head)

whereas current klist semantics are

klist_add(head, node)

This is bound to cause confusion, and since klist is the newcomer, it
should follow the list_head semantics.

I also added missing include guards to klist.h

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05 16:03:13 -07:00
Jesper Juhl fef6ec8dd9 [PATCH] Driver core: small cleanup; remove check for NULL before kfree() in driver core
Remove needless checking of variable for NULL before calling kfree() on it.
Applies to 2.6.13-rc6-git9

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05 16:03:13 -07:00
Shaohua Li ceaeade1f9 [PATCH] Driver core: hande sysdev suspend failure
This patch adds the return value check for sysdev suspend and does
restore in failure case. Send the patch to pm-list, but seems lost, so I
resend it.

Signed-off-by: Shaohua Li<shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05 16:03:12 -07:00
Dmitry Torokhov 76d1ce00bd [PATCH] Driver core: link device and all class devices derived from it.
Driver core: link device and all class devices derived from it.

To ease the task of locating class devices derived from a certain
device create symlinks from parent device to its class devices.
Change USB host class device name from usbX to usb_hostX to avoid
conflict when creating aforementioned links.

Tweaked by Greg to have the symlink be "class_name:class_device_name" in
order to prevent duplicate links.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05 16:03:10 -07:00
Greg Kroah-Hartman d65da6eae1 [PATCH] Fix manual binding infinite loop
Fix for manual binding of drivers to devices.  Problem is if you pass in
a valid device id, but the driver refuses to bind.  Infinite loop as
write() tries to resubmit the data it just sent.

Thanks to Michal Ostrowski <mostrows@watson.ibm.com> for pointing the
problem out.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05 16:03:09 -07:00
Pavel Machek ca078bae81 [PATCH] swsusp: switch pm_message_t to struct
This adds type-checking to pm_message_t, so that people can't confuse it
with int or u32.  It also allows us to fix "disk yoyo" during suspend (disk
spinning down/up/down).

[We've tried that before; since that cpufreq problems were fixed and I've
tried make allyes config and fixed resulting damage.]

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Alexander Nyberg <alexn@telia.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:16 -07:00
Martin Hicks c07e02db76 [PATCH] VM: add page_state info to per-node meminfo
Add page_state info to the per-node meminfo file in sysfs.  This is mostly
just for informational purposes.

The lack of this information was brought up recently during a discussion
regarding pagecache clearing, and I put this patch together to test out one
of the suggestions.

It seems like interesting info to have, so I'm submitting the patch.

Signed-off-by: Martin Hicks <mort@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:49 -07:00
James Bottomley 2b7d6a8cb9 [SCSI] attribute container final klist fixes
Since the attribute container deletes from a klist while it's walking
it, it is vulnerable to the problem (and fix) here:

http://marc.theaimsgroup.com/?l=linux-scsi&m=112485448830217

The attached fixes this (but won't compile without the above).

It also fixes the logical reversal in the traversal loop which meant
that we were never actually traversing the loop to hit this bug in the
first place.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-30 22:44:32 -05:00
James Bottomley 53c165e0a6 [SCSI] correct attribute_container list usage
One of the changes in the attribute_container code in the scsi-misc tree
was to add a lock to protect the list of devices per container.  This,
unfortunately, leads to potential scheduling while atomic problems if
there's a sleep in the function called by a trigger.

The correct solution is to use the kernel klist infrastructure instead
which allows lockless traversal of a list.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-30 22:44:20 -05:00
James Bottomley 7a93aef7fb Merge HEAD from ../scsi-misc-2.6-tmp 2005-08-28 11:18:35 -05:00
James Bottomley ebd8bb7647 [SCSI] fix transport class corner case after rework
If your transport class sets the ATTRIBUTE_CONTAINER_NO_CLASSDEVS flag,
then its configure method never gets called.  This patch fixes that so
that the configure method is called with a NULL classdev.

Also remove a spurious inverted comma in the transport_class comments.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-28 11:14:06 -05:00
Greg KH 518e654083 [PATCH] Fix manual binding infinite loop
Fix for manual binding of drivers to devices.  Problem is if you pass in
a valid device id, but the driver refuses to bind.  Infinite loop as
write() tries to resubmit the data it just sent.

Thanks to Michal Ostrowski <mostrows@watson.ibm.com> for pointing the
problem out.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-17 22:02:25 -07:00
Maneesh Soni 208f3d6175 [PATCH] Driver core: potentially fix use after free in class_device_attr_show
This moves the code to free devt_attr from class_device_del() to
class_dev_release() which is called after the last reference to the
corresponding kobject() is gone.

This allows us to keep the devt_attr alive while the corresponding
sysfs file is open.

Signed-off-by: Maneesh Soni <maneesh@in.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-16 21:06:24 -07:00
James Bottomley d0a7e57400 [SCSI] correct transport class abstraction to work outside SCSI
I recently tried to construct a totally generic transport class and
found there were certain features missing from the current abstract
transport class.  Most notable is that you have to hang the data on the
class_device but most of the API is framed in terms of the generic
device, not the class_device.

These changes are two fold

- Provide the class_device to all of the setup and configure APIs
- Provide and extra API to take the device and the attribute class and
  return the corresponding class_device

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-14 17:21:27 -05:00
Len Brown 5028770a42 [ACPI] merge acpi-2.6.12 branch into latest Linux 2.6.13-rc...
Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-12 17:21:56 -04:00
Alexey Starikovskiy e2a5b420f7 [ACPI] ACPI poweroff fix
Register an "acpi" system device to be notified of shutdown preparation.
This depends on CONFIG_PM

http://bugzilla.kernel.org/show_bug.cgi?id=4041

Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-11 23:20:49 -04:00
Patrick Mochel d62c0f9fd2 [PATCH] Driver core: Use klist_del() instead of klist_remove().
Use klist_del() instead of klist_remove() when unregistering devices.
This will prevent a deadlock when executing a recursive unregister using
device_for_each_child().

Signed-off-by Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-29 22:48:05 -07:00
Greg Kroah-Hartman 23d3d602cb [PATCH] driver core: change bus_rescan_devices to return void
No one was looking at the return value of bus_rescan_devices, and it
really wasn't anything that anyone in the kernel would ever care about.
So change it which enabled some counting code to be removed also.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-29 22:48:04 -07:00
Greg Kroah-Hartman afdce75f1e [PATCH] driver core: Add the ability to bind drivers to devices from userspace
This adds a single file, "bind", to the sysfs directory of every driver
registered with the driver core.  To bind a device to a driver, write
the bus id of the device you wish to bind to that specific driver to the
"bind" file (remember to not add a trailing \n).  If that bus id matches
a device on that bus, and it does not currently have a driver bound to
it, the probe sequence will be initiated with that driver and device.

Note, this requires that the driver itself be willing and able to accept
that device (usually through a device id type table).  This patch does
not make it possible to override the driver's id table.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-29 22:48:04 -07:00
Greg Kroah-Hartman 151ef38f7c [PATCH] driver core: Add the ability to unbind drivers to devices from userspace
This adds a single file, "unbind", to the sysfs directory of every
device that is currently bound to a driver.  To unbind the driver from
the device, write anything to this file and they will be disconnected
from each other.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-29 22:48:04 -07:00
Cornelia Huck 0edb586049 [PATCH] driver core: add bus_find_device & driver_find_device functions
Add bus_find_device() and driver_find_device() which allow searching for a
device in the bus's resp. the driver's klist and obtain a reference on it.

Signed-off-by: Cornelia Huck <cohuck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-29 22:48:03 -07:00
Stanislaw W. Gruszka b92eac01c3 [PATCH] request_firmware(): avoid race conditions
Avoid race occurs when some process have open file descriptor for class
device attributes and already firmware allocated memory are freed.  Don't
allow negative loading timeout.

Signed-off-by: Stanislaw W. Gruszka <stf_xl@wp.pl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 21:20:30 -07:00
Nathan Lynch fb69c3907e [PATCH] generate hotplug events for cpu online
We already do kobject_hotplug for cpu offline; this adds a kobject_hotplug
call for the online case.  This is being requested by developers of an
application which wants to be notified about both kinds of events.

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:31 -07:00
Ashok Raj 52a119feaa [PATCH] make smp_prepare_cpu to a weak function
I really wish smp_prepare_cpu() would disappear eventually.  In the interim
this is ideally a weak function, so we dont end up changing several places
to define this dummy in headers.

Today since the dummy declaration is done only in drivers/base/cpu.c but
the function is called in kernel/power/smp.c i get undefined reference in
my cpu hotplug code for x86_64 under development.

Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:30 -07:00
Li Shaohua e1367daf3e [PATCH] cpu state clean after hot remove
Clean CPU states in order to reuse smp boot code for CPU hotplug.

Signed-off-by: Li Shaohua<shaohua.li@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:30 -07:00
Greg Kroah-Hartman d377e85b53 [PATCH] driver core: Fix up the device_attach() error handling in bus_add_device()
Don't error out if something "bad" happens when trying to bind a driver to a
device.  We want the sysfs attributes to be present for later when we try to
tear down the device.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-22 23:01:10 -07:00
Christoph Lameter e7c8d5c995 [PATCH] node local per-cpu-pages
This patch modifies the way pagesets in struct zone are managed.

Each zone has a per-cpu array of pagesets.  So any particular CPU has some
memory in each zone structure which belongs to itself.  Even if that CPU is
not local to that zone.

So the patch relocates the pagesets for each cpu to the node that is nearest
to the cpu instead of allocating the pagesets in the (possibly remote) target
zone.  This means that the operations to manage pages on remote zone can be
done with information available locally.

We play a macro trick so that non-NUMA pmachines avoid the additional
pointer chase on the page allocator fastpath.

AIM7 benchmark on a 32 CPU SGI Altix

w/o patches:
Tasks    jobs/min  jti  jobs/min/task      real       cpu
    1      484.68  100       484.6769     12.01      1.97   Fri Mar 25 11:01:42 2005
  100    27140.46   89       271.4046     21.44    148.71   Fri Mar 25 11:02:04 2005
  200    30792.02   82       153.9601     37.80    296.72   Fri Mar 25 11:02:42 2005
  300    32209.27   81       107.3642     54.21    451.34   Fri Mar 25 11:03:37 2005
  400    34962.83   78        87.4071     66.59    588.97   Fri Mar 25 11:04:44 2005
  500    31676.92   75        63.3538     91.87    742.71   Fri Mar 25 11:06:16 2005
  600    36032.69   73        60.0545     96.91    885.44   Fri Mar 25 11:07:54 2005
  700    35540.43   77        50.7720    114.63   1024.28   Fri Mar 25 11:09:49 2005
  800    33906.70   74        42.3834    137.32   1181.65   Fri Mar 25 11:12:06 2005
  900    34120.67   73        37.9119    153.51   1325.26   Fri Mar 25 11:14:41 2005
 1000    34802.37   74        34.8024    167.23   1465.26   Fri Mar 25 11:17:28 2005

with slab API changes and pageset patch:

Tasks    jobs/min  jti  jobs/min/task      real       cpu
    1      485.00  100       485.0000     12.00      1.96   Fri Mar 25 11:46:18 2005
  100    28000.96   89       280.0096     20.79    150.45   Fri Mar 25 11:46:39 2005
  200    32285.80   79       161.4290     36.05    293.37   Fri Mar 25 11:47:16 2005
  300    40424.15   84       134.7472     43.19    438.42   Fri Mar 25 11:47:59 2005
  400    39155.01   79        97.8875     59.46    590.05   Fri Mar 25 11:48:59 2005
  500    37881.25   82        75.7625     76.82    730.19   Fri Mar 25 11:50:16 2005
  600    39083.14   78        65.1386     89.35    872.79   Fri Mar 25 11:51:46 2005
  700    38627.83   77        55.1826    105.47   1022.46   Fri Mar 25 11:53:32 2005
  800    39631.94   78        49.5399    117.48   1169.94   Fri Mar 25 11:55:30 2005
  900    36903.70   79        41.0041    141.94   1310.78   Fri Mar 25 11:57:53 2005
 1000    36201.23   77        36.2012    160.77   1458.31   Fri Mar 25 12:00:34 2005

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Shobhit Dayal <shobhit@calsoftinc.com>
Signed-off-by: Shai Fultheim <Shai@Scalex86.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:16 -07:00
Benjamin Herrenschmidt 42b16c051c [PATCH] Driver core: Don't "lose" devices on suspend on failure
I think we need this patch or we might "lose" devices to the dpm_irq_off
list if a failure occurs during the suspend process.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:37 -07:00
Yani Ioannou 74880c063b [PATCH] Driver Core: drivers/base - drivers/i2c/chips/adm1026.c: update device attribute callbacks
Signed-off-by: Yani Ioannou <yani.ioannou@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:32 -07:00
Yani Ioannou 54b6f35c99 [PATCH] Driver core: change device_attribute callbacks
This patch adds the device_attribute paramerter to the
device_attribute store and show sysfs callback functions, and passes a
reference to the attribute when the callbacks are called.

Signed-off-by: Yani Ioannou <yani.ioannou@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:31 -07:00
Hannes Reinecke ca2b94ba12 [PATCH] driver core: fix error handling in bus_add_device
The error handling in bus_add_device() and device_attach() is simply
non-existing. This patch propagates any error from device_attach to
the upper layers to allow for a proper recovery.

From: Hannes Reinecke <hare@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:31 -07:00
Keiichiro Tokunaga 4b45099b75 [PATCH] Driver core: unregister_node() for hotplug use
This adds a generic function 'unregister_node()'.
It is used to remove objects of a node going away
for hotplug.  All the devices on the node must be
unregistered before calling this function.

Signed-off-by: Keiichiro Tokunaga <tokunaga.keiich@jp.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff -puN drivers/base/node.c~numa_hp_base drivers/base/node.c
2005-06-20 15:15:29 -07:00
Alan Stern c95a6b057b [PATCH] driver core: Fix races in driver_detach()
This patch is intended for your "driver" tree.  It fixes several subtle
races in driver_detach() and device_release_driver() in the driver-model
core.

The major change is to use klist_remove() rather than klist_del() when
taking a device off its driver's list.  There's no other way to guarantee
that the list pointers will be updated before some other driver binds to
the device.  For this to work driver_detach() can't use a klist iterator,
so the loop over the devices must be written out in full.  In addition the
patch protects against the possibility that, when a driver and a device
are unregistered at the same time, one may be unloaded from memory before
the other is finished using it.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:28 -07:00
Patrick Mochel 0d3e5a2e39 [PATCH] Driver Core: fix bk-driver-core kills ppc64
There's no check to see if the device is already bound to a driver, which
could do bad things.  The first thing to go wrong is that it will try to match
a driver with a device already bound to one.  In some cases (it appears with
USB with drivers/usb/core/usb.c::usb_match_id()), some drivers will match a
device based on the class type, so it would be common (especially for HID
devices) to match a device that is already bound.

The fun comes when ->probe() is called, it fails, then
driver_probe_device() does this:

	dev->driver = NULL;

Later on, that pointer could be be dereferenced without checking and cause
hell to break loose.

This problem could be nasty. It's very hardware dependent, since some
devices could have a different set of matching qualifiers than others.

Now, I don't quite see exactly where/how you were getting that crash.
You're dereferencing bad memory, but I'm not sure which pointer was bad
and where it came from, but it could have come from a couple of different
places.

The patch below will hopefully fix it all up for you. It's against
2.6.12-rc2-mm1, and does the following:

- Move logic to driver_probe_device() and comments uncommon returns:
  1 - If device is bound
  0 - If device not bound, and no error
  error - If there was an error.

- Move locking to caller of that function, since we want to lock a
  device for the entire time we're trying to bind it to a driver (to
  prevent against a driver being loaded at the same time).

- Update __device_attach() and __driver_attach() to do that locking.

- Check if device is already bound in __driver_attach()

- Update the converse device_release_driver() so it locks the device
  around all of the operations.

- Mark driver_probe_device() as static and remove export. It's an
  internal function, it should stay that way, and there are no other
  callers. If there is ever a need to export it, we can audit it as
  necessary.

Signed-off-by: Andrew Morton <akpm@osdl.org>
2005-06-20 15:15:27 -07:00
gregkh@suse.de b86c1df1f9 [PATCH] Driver core: Fix up the driver and device iterators to be quieter
Also stops looping over the lists when a match is found.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de
2005-06-20 15:15:27 -07:00
gregkh@suse.de 126eddfbf8 [PATCH] driver core: change export symbol for driver_for_each_device()
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Index: linux-2.6.12-rc2/drivers/base/driver.c
===================================================================
2005-06-20 15:15:24 -07:00
mochel@digitalimplant.org 4d12d2d953 [PATCH] Fix up bogus comment.
Signed-off-by: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff -Nru a/drivers/base/driver.c b/drivers/base/driver.c
2005-06-20 15:15:23 -07:00
mochel@digitalimplant.org 36239577cf [PATCH] Use a klist for device child lists.
- Use klist iterator in device_for_each_child(), making it safe to use for
  removing devices.
- Remove unused list_to_dev() function.
- Kills all usage of devices_subsys.rwsem.

Signed-off-by: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:23 -07:00
mochel@digitalimplant.org 0956af53af [PATCH] Call klist_del() instead of klist_remove().
- Can't wait on removing the current item in the list (the positive refcount *because*
  we are using it causes it to deadlock).

Signed-off-by: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:19 -07:00
mochel@digitalimplant.org 63c4f204ff [PATCH] Remove struct device::driver_list.
Signed-off-by: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:18 -07:00
mochel@digitalimplant.org 7dc35cdf69 [PATCH] Remove struct device::bus_list.
Signed-off-by: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:18 -07:00
mochel@digitalimplant.org 6eded061b1 [PATCH] Fix up bus code and remove use of rwsem.
- Don't add devices to bus's embedded kset, since it's not used by anyone anymore.
- Don't need to take the bus rwsem when calling {device,driver}_attach(), since
  those functions use the klists and the klists' spinlocks.

Signed-off-by: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:18 -07:00
mochel@digitalimplant.org 2287c322b6 [PATCH] Use bus_for_each_{dev,drv} for driver binding.
- Now possible, since the lists are locked using the klist lock and not the
  global rwsem.

Signed-off-by: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:17 -07:00
mochel@digitalimplant.org cb85b6f1cc [PATCH] Remove the unused device_find().
Signed-off-by: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:16 -07:00
mochel@digitalimplant.org 94e7b1c5ff [PATCH] Add a klist to struct device_driver for the devices bound to it.
- Use it in driver_for_each_device() instead of the regular list_head and stop using
  the bus's rwsem for protection.
- Use driver_for_each_device() in driver_detach() so we don't deadlock on the
  bus's rwsem.
- Remove ->devices.
- Move klist access and sysfs link access out from under device's semaphore, since
  they're synchronized through other means.

Signed-off-by: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:16 -07:00
mochel@digitalimplant.org 38fdac3cdc [PATCH] Add a klist to struct bus_type for its drivers.
- Use it in bus_for_each_drv().
- Use the klist spinlock instead of the bus rwsem.

Signed-off-by: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:14 -07:00
mochel@digitalimplant.org 465c7a3a3a [PATCH] Add a klist to struct bus_type for its devices.
- Use it for bus_for_each_dev().
- Use the klist spinlock instead of the bus rwsem.

Signed-off-by: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:14 -07:00
mochel@digitalimplant.org fae3cd0025 [PATCH] Add driver_for_each_device().
Now there's an iterator for accessing each device bound to a driver.

Signed-off-by: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Index: linux-2.6.12-rc2/drivers/base/driver.c
===================================================================
2005-06-20 15:15:13 -07:00
mochel@digitalimplant.org 07e4a3e27f [PATCH] Move device/driver code to drivers/base/dd.c
This relocates the driver binding/unbinding code to drivers/base/dd.c. This is done
for two reasons: One, it's not code related to the bus_type itself; it uses some from
that, some from devices, and some from drivers. And Two, it will make it easier to do
some of the upcoming lock removal on that code..

Signed-off-by: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:13 -07:00
mochel@digitalimplant.org af70316af1 [PATCH] Add a semaphore to struct device to synchronize calls to its driver.
This adds a per-device semaphore that is taken before every call from the core to a
driver method. This prevents e.g. simultaneous calls to the ->suspend() or ->resume()
and ->probe() or ->release(), potentially saving a whole lot of headaches.

It also moves us a step closer to removing the bus rwsem, since it protects the fields
in struct device that are modified by the core.

Signed-off-by: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:12 -07:00
gregkh@suse.de cd987d38cc [PATCH] class: remove class_simple code, as no one in the tree is using it anymore.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:11 -07:00
gregkh@suse.de 2fc68447df [PATCH] class: add kerneldoc for the new class functions.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:11 -07:00
gregkh@suse.de e9ba6365fd [PATCH] CLASS: move a "simple" class logic into the class core.
One step on improving the class api so that it can not be used incorrectly.
This also fixes the module owner issue with the dev files that happened when
the devt logic moved to the class core.

Based on a patch originally written by Kay Sievers <kay.sievers@vrfy.org>

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:04 -07:00
Dmitry Torokhov 4a0c20bf8c [PATCH] sysfs: (driver/base) if show/store is missing return -EIO
sysfs: fix drivers/base so if an attribute doesn't implement
       show or store method read/write will return -EIO
       instead of 0.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:02 -07:00
Dmitry Torokhov 419cab3fc6 [PATCH] kset_hotplug_ops->name shoudl return const char *
kobject: change name() method in kset_hotplug_ops return const char *
	 since users shoudl not try to modify returned data.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:01 -07:00
Kay Sievers 187a1a94d6 [PATCH] driver core: restore event order for device_add()
As a result of the split of the kobject-registration and the
corresponding hotplug event, the order of events for device_add() has
changed. This restores the old order, cause it confused some userspace
applications.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-23 16:08:12 -07:00
David Brownell 0b405a0f7e [PATCH] Driver Core: remove driver model detach_state
The driver model has a "detach_state" mechanism that:

 - Has never been used by any in-kernel drive;
 - Is superfluous, since driver remove() methods can do the same thing;
 - Became buggy when the suspend() parameter changed semantics and type;
 - Could self-deadlock when called from certain suspend contexts;
 - Is effectively wasted documentation, object code, and headspace.

This removes that "detach_state" mechanism; net code shrink, as well
as a per-device saving in the driver model and sysfs.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-17 14:54:55 -07:00
David Brownell 82428b62aa [PATCH] Driver Core: pm diagnostics update, check for errors
This patch includes various tweaks in the messaging that appears during
system pm state transitions:

  * Warn about certain illegal calls in the device tree, like resuming
    child before parent or suspending parent before child.  This could
    happen easily enough through sysfs, or in some cases when drivers
    use device_pm_set_parent().

  * Be more consistent about dev_dbg() tracing ... do it for resume() and
    shutdown() too, and never if the driver doesn't have that method.

  * Say which type of system sleep state is being entered.

Except for the warnings, these only affect debug messaging.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-17 14:54:54 -07:00
Roman Kagan b2d84f078a [PATCH] drivers/base/bus.c: fix iteration in driver_detach()
With 2.6.11 and 2.6.12-rc2 (and perhaps a few versions before) usb
drivers for multi-interface devices, which do
usb_driver_release_interface() in their disconnect(), make rmmod hang.

It turns out to be due to a bug in drivers/base/bus.c:driver_detach(),
that iterates over the list of attached devices with
list_for_each_safe() under an assumption that device_release_driver()
only releases the current device, while it may also call
device_release_driver() for other devices on the same list.

The following patch fixes it.  Please consider applying.

Signed-off-by: Roman Kagan <rkagan@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-04 23:44:38 -07:00
Alexander Nyberg 177a432494 [PATCH] Hotplug: Make dev->bus checking consistent
Earlier in the same function dev->bus is checked before dereferenced,
make consistent although I honestly don't know if dev->bus could
ever be NULL

Found by the Coverity tool

Signed-off-by: Alexander Nyberg <alexn@dsv.su.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-04 23:44:37 -07:00
Martin Waitz 67be2dd1ba [PATCH] DocBook: fix some descriptions
Some KernelDoc descriptions are updated to match the current code.
No code changes.

Signed-off-by: Martin Waitz <tali@admingilde.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:26 -07:00
kay.sievers@vrfy.org e57cd73e2e [PATCH] kobject/hotplug split - devices core
kobject_add() and kobject_del() don't emit hotplug events anymore. Do it
ourselves if we are finished populating the device directory.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-18 21:57:36 -07:00
kay.sievers@vrfy.org 0700f56bbc [PATCH] kobject/hotplug split - class core
kobject_add() and kobject_del() don't emit hotplug events anymore. Do it
ourselves if we are finished populating the device directory.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-18 21:57:35 -07:00
Robert Schwebel 46ea0d6c26 [PATCH] export platform_add_devices
platform_add_devices can be used from within modules, so it should be
exported.  This can for example happen if you have hotpluggable firmware in
an FPGA on a system on chip processor; in our case the FPGA is probed for
devices and the FPGA base code registers the devices it has found with the
kernel.  

(akpm: I think this is reasonable from a licensing POV: it's unlikely that
anyone would be interested in merging such specialised modules into mainline,
and it's a GPL export).

Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-18 21:57:32 -07:00
kay.sievers@vrfy.org 6897089c5f [PATCH] add TIMEOUT to firmware_class hotplug event
On Tue, 2005-03-15 at 09:25 +0100, Hannes Reinecke wrote:
> The current implementation of the firmware class breaks a fundamental
> assumption in udevd: that the physical device can be initialised fully
> prior to executing the next event for that device.

Here we add a TIMEOUT value to the hotplug environment of the firmware
requesting event. I will adapt udevd not to wait for anything else, if
it finds a TIMEOUT key.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-18 21:57:31 -07:00
Pavel Machek 438510f6f0 [PATCH] pm_message_t: more fixes in common and i386
I thought I'm done with fixing u32 vs.  pm_message_t ...  unfortunately
that turned out not to be the case as Russel King pointed out.  Here are
fixes for Documentation and common code (mainly system devices).

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:25:24 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00