This change adds support on the kernel side to allow for BPF programs to
call kernel module functions. Userspace will prepare an array of module
BTF fds that is passed in during BPF_PROG_LOAD using fd_array parameter.
In the kernel, the module BTFs are placed in the auxilliary struct for
bpf_prog, and loaded as needed.
The verifier then uses insn->off to index into the fd_array. insn->off
0 is reserved for vmlinux BTF (for backwards compat), so userspace must
use an fd_array index > 0 for module kfunc support. kfunc_btf_tab is
sorted based on offset in an array, and each offset corresponds to one
descriptor, with a max limit up to 256 such module BTFs.
We also change existing kfunc_tab to distinguish each element based on
imm, off pair as each such call will now be distinct.
Another change is to check_kfunc_call callback, which now include a
struct module * pointer, this is to be used in later patch such that the
kfunc_id and module pointer are matched for dynamically registered BTF
sets from loadable modules, so that same kfunc_id in two modules doesn't
lead to check_kfunc_call succeeding. For the duration of the
check_kfunc_call, the reference to struct module exists, as it returns
the pointer stored in kfunc_btf_tab.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-2-memxor@gmail.com
Pablo Neira Ayuso says:
====================
Netfilter fixes for net (v2)
The following patchset contains Netfilter fixes for net:
1) Move back the defrag users fields to the global netns_nf area.
Kernel fails to boot if conntrack is builtin and kernel is booted
with: nf_conntrack.enable_hooks=1. From Florian Westphal.
2) Rule event notification is missing relevant context such as
the position handle and the NLM_F_APPEND flag.
3) Rule replacement is expanded to add + delete using the existing
rule handle, reverse order of this operation so it makes sense
from rule notification standpoint.
4) Propagate to userspace the NLM_F_CREATE and NLM_F_EXCL flags
from the rule notification path.
Patches #2, #3 and #4 are used by 'nft monitor' and 'iptables-monitor'
userspace utilities which are not correctly representing the following
operations through netlink notifications:
- rule insertions
- rule addition/insertion from position handle
- create table/chain/set/map/flowtable/...
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This trivial function is called ~90,000 times on 256 cpus hosts,
when reading /proc/net/netstat. And this number keeps inflating.
Inlining it saves many cycles.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When user sets SO_RESERVE_MEM socket option, in order to utilize the
reserved memory when in memory pressure state, we adjust rcv_ssthresh
according to the available reserved memory for the socket, instead of
using 4 * advmss always.
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If user sets SO_RESERVE_MEM socket option, in order to fully utilize the
reserved memory in memory pressure state on the tx path, we modify the
logic in sk_stream_moderate_sndbuf() to set sk_sndbuf according to
available reserved memory, instead of MIN_SOCK_SNDBUF, and adjust it
when new data is acked.
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This socket option provides a mechanism for users to reserve a certain
amount of memory for the socket to use. When this option is set, kernel
charges the user specified amount of memory to memcg, as well as
sk_forward_alloc. This amount of memory is not reclaimable and is
available in sk_forward_alloc for this socket.
With this socket option set, the networking stack spends less cycles
doing forward alloc and reclaim, which should lead to better system
performance, with the cost of an amount of pre-allocated and
unreclaimable memory, even under memory pressure.
Note:
This socket option is only available when memory cgroup is enabled and we
require this reserved memory to be charged to the user's memcg. We hope
this could avoid mis-behaving users to abused this feature to reserve a
large amount on certain sockets and cause unfairness for others.
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
datagram.c hasn't use any macro or function declared in linux/ip.h.
Thus, these files can be removed from datagram.c safely without
affecting the compilation of the net/ipv4 module
Signed-off-by: Mianhan Liu <liumh1@shanghaitech.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
fib_notifier.c hasn't use any macro or function declared
in net/netns/ipv4.h.
Thus, these files can be removed from fib_notifier.c safely
without affecting the compilation of the net/ipv4 module.
Signed-off-by: Mianhan Liu <liumh1@shanghaitech.edu.cn>
Link: https://lore.kernel.org/r/20210928164011.1454-1-liumh1@shanghaitech.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
up->corkflag field can be read or written without any lock.
Annotate accesses to avoid possible syzbot/KCSAN reports.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a revert of
7b1957b049 ("netfilter: nf_defrag_ipv4: use net_generic infra")
and a partial revert of
8b0adbe3e3 ("netfilter: nf_defrag_ipv6: use net_generic infra").
If conntrack is builtin and kernel is booted with:
nf_conntrack.enable_hooks=1
.... kernel will fail to boot due to a NULL deref in
nf_defrag_ipv4_enable(): Its called before the ipv4 defrag initcall is
made, so net_generic() returns NULL.
To resolve this, move the user refcount back to struct net so calls
to those functions are possible even before their initcalls have run.
Fixes: 7b1957b049 ("netfilter: nf_defrag_ipv4: use net_generic infra")
Fixes: 8b0adbe3e3 ("netfilter: nf_defrag_ipv6: use net_generic infra").
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
tcp_nv.c hasn't use any macro or function declared in mm.h. Thus, these files
can be removed from tcp_nv.c safely without affecting the compilation
of the net module.
Signed-off-by: Mianhan Liu <liumh1@shanghaitech.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
1) ipset limits the max allocatable memory via kvmalloc() to MAX_INT,
from Jozsef Kadlecsik.
2) Check ip_vs_conn_tab_bits value to be in the range specified
in Kconfig, from Andrea Claudi.
3) Initialize fragment offset in ip6tables, from Jeremy Sowden.
4) Make conntrack hash chain length random, from Florian Westphal.
5) Add zone ID to conntrack and NAT hashtuple again, also from Florian.
6) Add selftests for bidirectional zone support and colliding tuples,
from Florian Westphal.
7) Unlink table before synchronize_rcu when cleaning tables with
owner, from Florian.
8) ipset limits the max allocatable memory via kvmalloc() to MAX_INT.
9) Release conntrack entries via workqueue in masquerade, from Florian.
10) Fix bogus net_init in iptables raw table definition, also from Florian.
11) Work around missing softdep in log extensions, from Florian Westphal.
12) Serialize hash resizes and cleanups with mutex, from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
netfilter: conntrack: serialize hash resizes and cleanups
netfilter: log: work around missing softdep backend module
netfilter: iptable_raw: drop bogus net_init annotation
netfilter: nf_nat_masquerade: defer conntrack walk to work queue
netfilter: nf_nat_masquerade: make async masq_inet6_event handling generic
netfilter: nf_tables: Fix oversized kvmalloc() calls
netfilter: nf_tables: unlink table before deleting it
selftests: netfilter: add zone stress test with colliding tuples
selftests: netfilter: add selftest for directional zone support
netfilter: nat: include zone id in nat table hash again
netfilter: conntrack: include zone id in tuple hash again
netfilter: conntrack: make max chain length random
netfilter: ip6_tables: zero-initialize fragment offset
ipvs: check that ip_vs_conn_tab_bits is between 8 and 20
netfilter: ipset: Fix oversized kvmalloc() calls
====================
Link: https://lore.kernel.org/r/20210924221113.348767-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to track CE marks per rate sample (one round trip), TCP needs a
per-skb header field to record the tp->delivered_ce count when the skb
was sent. To make space, we replace the "last_in_flight" field which is
used exclusively for NV congestion control. The stat needed by NV can be
alternatively approximated by existing stats tcp_sock delivered and
mss_cache.
This patch counts the number of packets delivered which have CE marks in
the rate sample, using similar approach of delivery accounting.
Cc: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Luke Hsiao <lukehsiao@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Multipath RTA_FLOW is embedded in nexthop. Dump it in fib_add_nexthop()
to get the length of rtnexthop correct.
Fixes: b0f6019363 ("ipv4: Refactor nexthop attributes in fib_dump_info")
Signed-off-by: Xiao Liang <shaw.leon@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
net/mptcp/protocol.c
977d293e23 ("mptcp: ensure tx skbs always have the MPTCP ext")
efe686ffce ("mptcp: ensure tx skbs always have the MPTCP ext")
same patch merged in both trees, keep net-next.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts the following patches :
- commit 2e05fcae83 ("tcp: fix compile error if !CONFIG_SYSCTL")
- commit 4f661542a4 ("tcp: fix zerocopy and notsent_lowat issues")
- commit 472c2e07ee ("tcp: add one skb cache for tx")
- commit 8b27dae5a2 ("tcp: add one skb cache for rx")
Having a cache of one skb (in each direction) per TCP socket is fragile,
since it can cause a significant increase of memory needs,
and not good enough for high speed flows anyway where more than one skb
is needed.
We want instead to add a generic infrastructure, with more flexible
per-cpu caches, for alien NUMA nodes.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After the previous patch the mentioned helper is
used only inside its compilation unit: let's make
it static.
RFC -> v1:
- preserve the tcp_build_frag() helper (Eric)
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
the tcp_skb_entail() helper is actually skb_entail(), renamed
to provide proper scope.
The two helper will be used by the next patch.
RFC -> v1:
- rename skb_entail to tcp_skb_entail (Eric)
Acked-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
syzkaller discovered memory leaks [1] that can be reduced to the
following commands:
# ip nexthop add id 1 blackhole
# devlink dev reload pci/0000:06:00.0
As part of the reload flow, mlxsw will unregister its netdevs and then
unregister from the nexthop notification chain. Before unregistering
from the notification chain, mlxsw will receive delete notifications for
nexthop objects using netdevs registered by mlxsw or their uppers. mlxsw
will not receive notifications for nexthops using netdevs that are not
dismantled as part of the reload flow. For example, the blackhole
nexthop above that internally uses the loopback netdev as its nexthop
device.
One way to fix this problem is to have listeners flush their nexthop
tables after unregistering from the notification chain. This is
error-prone as evident by this patch and also not symmetric with the
registration path where a listener receives a dump of all the existing
nexthops.
Therefore, fix this problem by replaying delete notifications for the
listener being unregistered. This is symmetric to the registration path
and also consistent with the netdev notification chain.
The above means that unregister_nexthop_notifier(), like
register_nexthop_notifier(), will have to take RTNL in order to iterate
over the existing nexthops and that any callers of the function cannot
hold RTNL. This is true for mlxsw and netdevsim, but not for the VXLAN
driver. To avoid a deadlock, change the latter to unregister its nexthop
listener without holding RTNL, making it symmetric to the registration
path.
[1]
unreferenced object 0xffff88806173d600 (size 512):
comm "syz-executor.0", pid 1290, jiffies 4295583142 (age 143.507s)
hex dump (first 32 bytes):
41 9d 1e 60 80 88 ff ff 08 d6 73 61 80 88 ff ff A..`......sa....
08 d6 73 61 80 88 ff ff 01 00 00 00 00 00 00 00 ..sa............
backtrace:
[<ffffffff81a6b576>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline]
[<ffffffff81a6b576>] slab_post_alloc_hook+0x96/0x490 mm/slab.h:522
[<ffffffff81a716d3>] slab_alloc_node mm/slub.c:3206 [inline]
[<ffffffff81a716d3>] slab_alloc mm/slub.c:3214 [inline]
[<ffffffff81a716d3>] kmem_cache_alloc_trace+0x163/0x370 mm/slub.c:3231
[<ffffffff82e8681a>] kmalloc include/linux/slab.h:591 [inline]
[<ffffffff82e8681a>] kzalloc include/linux/slab.h:721 [inline]
[<ffffffff82e8681a>] mlxsw_sp_nexthop_obj_group_create drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:4918 [inline]
[<ffffffff82e8681a>] mlxsw_sp_nexthop_obj_new drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:5054 [inline]
[<ffffffff82e8681a>] mlxsw_sp_nexthop_obj_event+0x59a/0x2910 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:5239
[<ffffffff813ef67d>] notifier_call_chain+0xbd/0x210 kernel/notifier.c:83
[<ffffffff813f0662>] blocking_notifier_call_chain kernel/notifier.c:318 [inline]
[<ffffffff813f0662>] blocking_notifier_call_chain+0x72/0xa0 kernel/notifier.c:306
[<ffffffff8384b9c6>] call_nexthop_notifiers+0x156/0x310 net/ipv4/nexthop.c:244
[<ffffffff83852bd8>] insert_nexthop net/ipv4/nexthop.c:2336 [inline]
[<ffffffff83852bd8>] nexthop_add net/ipv4/nexthop.c:2644 [inline]
[<ffffffff83852bd8>] rtm_new_nexthop+0x14e8/0x4d10 net/ipv4/nexthop.c:2913
[<ffffffff833e9a78>] rtnetlink_rcv_msg+0x448/0xbf0 net/core/rtnetlink.c:5572
[<ffffffff83608703>] netlink_rcv_skb+0x173/0x480 net/netlink/af_netlink.c:2504
[<ffffffff833de032>] rtnetlink_rcv+0x22/0x30 net/core/rtnetlink.c:5590
[<ffffffff836069de>] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
[<ffffffff836069de>] netlink_unicast+0x5ae/0x7f0 net/netlink/af_netlink.c:1340
[<ffffffff83607501>] netlink_sendmsg+0x8e1/0xe30 net/netlink/af_netlink.c:1929
[<ffffffff832fde84>] sock_sendmsg_nosec net/socket.c:704 [inline]
[<ffffffff832fde84>] sock_sendmsg net/socket.c:724 [inline]
[<ffffffff832fde84>] ____sys_sendmsg+0x874/0x9f0 net/socket.c:2409
[<ffffffff83304a44>] ___sys_sendmsg+0x104/0x170 net/socket.c:2463
[<ffffffff83304c01>] __sys_sendmsg+0x111/0x1f0 net/socket.c:2492
[<ffffffff83304d5d>] __do_sys_sendmsg net/socket.c:2501 [inline]
[<ffffffff83304d5d>] __se_sys_sendmsg net/socket.c:2499 [inline]
[<ffffffff83304d5d>] __x64_sys_sendmsg+0x7d/0xc0 net/socket.c:2499
Fixes: 2a014b200b ("mlxsw: spectrum_router: Add support for nexthop objects")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
xfrm4_tunnel.c hasn't use any macro or function declared in mutex.h and ip.h
Thus, these files can be removed from xfrm4_tunnel.c safely without affecting
the compilation of the net module.
Signed-off-by: Mianhan Liu <liumh1@shanghaitech.edu.cn>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
sysctl_net_ipv4.c hasn't use any macro or function declared in igmp.h,
inetdevice.h, mm.h, module.h, nsproxy.h, swap.h, inet_frag.h, route.h
and snmp.h. Thus, these files can be removed from sysctl_net_ipv4.c
safely without affecting the compilation of the net module.
Signed-off-by: Mianhan Liu <liumh1@shanghaitech.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
syncookies.c hasn't use any macro or function declared in slab.h and random.h,
Thus, these files can be removed from syncookies.c safely without
affecting the compilation of the net module.
Signed-off-by: Mianhan Liu <liumh1@shanghaitech.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
udp_tunnel_core.c hasn't use any macro or function declared in udp.h, types.h,
and net_namespace.h. Thus, these files can be removed from udp_tunnel_core.c
safely without affecting the compilation of the net module.
Signed-off-by: Mianhan Liu <liumh1@shanghaitech.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a leftover from the times when this function was wired up via
pernet_operations. Now its called when userspace asks for the table.
With CONFIG_NET_NS=n, iptable_raw_table_init memory has been discarded
already and we get a kernel crash.
Other tables are fine, __net_init annotation was removed already.
Fixes: fdacd57c79 ("netfilter: x_tables: never register tables by default")
Reported-by: youling 257 <youling257@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
tcp_minisocks.c hasn't use any macro or function declared in mm.h, module.h,
slab.h, sysctl.h, workqueue.h, static_key.h and inet_common.h. Thus, these
files can be removed from tcp_minisocks.c safely without affecting the
compilation of the net module.
Signed-off-by: Mianhan Liu <liumh1@shanghaitech.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcp_fastopen.c hasn't use any macro or function declared in crypto.h, err.h,
init.h, list.h, rculist.h and inetpeer.h. Thus, these files can be removed
from tcp_fastopen.c safely without affecting the compilation of the net module.
Signed-off-by: Mianhan Liu <liumh1@shanghaitech.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
route.c hasn't use any macro or function declared in uaccess.h, types.h,
string.h, sockios.h, times.h, protocol.h, arp.h and l3mdev.h. Thus, these
files can be removed from route.c safely without affecting the compilation
of the net module.
Signed-off-by: Mianhan Liu <liumh1@shanghaitech.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
The resilient nexthop group torture tests in fib_nexthop.sh exposed a
possible division by zero while replacing a resilient group [1]. The
division by zero occurs when the data path sees a resilient nexthop
group with zero buckets.
The tests replace a resilient nexthop group in a loop while traffic is
forwarded through it. The tests do not specify the number of buckets
while performing the replacement, resulting in the kernel allocating a
stub resilient table (i.e, 'struct nh_res_table') with zero buckets.
This table should never be visible to the data path, but the old nexthop
group (i.e., 'oldg') might still be used by the data path when the stub
table is assigned to it.
Fix this by only assigning the stub table to the old nexthop group after
making sure the group is no longer used by the data path.
Tested with fib_nexthops.sh:
Tests passed: 222
Tests failed: 0
[1]
divide error: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 1850 Comm: ping Not tainted 5.14.0-custom-10271-ga86eb53057fe #1107
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/01/2014
RIP: 0010:nexthop_select_path+0x2d2/0x1a80
[...]
Call Trace:
fib_select_multipath+0x79b/0x1530
fib_select_path+0x8fb/0x1c10
ip_route_output_key_hash_rcu+0x1198/0x2da0
ip_route_output_key_hash+0x190/0x340
ip_route_output_flow+0x21/0x120
raw_sendmsg+0x91d/0x2e10
inet_sendmsg+0x9e/0xe0
__sys_sendto+0x23d/0x360
__x64_sys_sendto+0xe1/0x1b0
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Cc: stable@vger.kernel.org
Fixes: 283a72a559 ("nexthop: Add implementation of resilient next-hop groups")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
this patch fixes below Errors reported by checkpatch
ERROR: do not initialise globals to 0
+int cipso_v4_rbm_optfmt = 0;
Signed-off-by: wangzhitong <wangzhitong@uniontech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit d7807a9adf.
As mentioned in https://lkml.org/lkml/2021/9/13/1819
5 years old commit 919483096b ("ipv4: fix memory leaks in ip_cmsg_send() callers")
was a correct fix.
ip_cmsg_send() can loop over multiple cmsghdr()
If IP_RETOPTS has been successful, but following cmsghdr generates an error,
we do not free ipc.ok
If IP_RETOPTS is not successful, we have freed the allocated temporary space,
not the one currently in ipc.opt.
Sure, code could be refactored, but let's not bring back old bugs.
Fixes: d7807a9adf ("Revert "ipv4: fix memory leaks in ip_cmsg_send() callers"")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 10d3be5692 ("tcp-tso: do not split TSO packets at retransmit
time") may directly retrans a multiple segments TSO/GSO packet without
split, Since this commit, we can no longer assume that a retransmitted
packet is a single segment.
This patch fixes the tp->undo_retrans accounting in tcp_sacktag_one()
that use the actual segments(pcount) of the retransmitted packet.
Before that commit (10d3be5692), the assumption underlying the
tp->undo_retrans-- seems correct.
Fixes: 10d3be5692 ("tcp-tso: do not split TSO packets at retransmit time")
Signed-off-by: zhenggy <zhenggy@chinatelecom.cn>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Turn udp_tunnel_nic work-queue to an ordered work-queue. This queue
holds the UDP-tunnel configuration commands of the different netdevs.
When the netdevs are functions of the same NIC the order of
execution may be crucial.
Problem example:
NIC with 2 PFs, both PFs declare offload quota of up to 3 UDP-ports.
$ifconfig eth2 1.1.1.1/16 up
$ip link add eth2_19503 type vxlan id 5049 remote 1.1.1.2 dev eth2 dstport 19053
$ip link set dev eth2_19503 up
$ip link add eth2_19504 type vxlan id 5049 remote 1.1.1.3 dev eth2 dstport 19054
$ip link set dev eth2_19504 up
$ip link add eth2_19505 type vxlan id 5049 remote 1.1.1.4 dev eth2 dstport 19055
$ip link set dev eth2_19505 up
$ip link add eth2_19506 type vxlan id 5049 remote 1.1.1.5 dev eth2 dstport 19056
$ip link set dev eth2_19506 up
NIC RX port offload infrastructure offloads the first 3 UDP-ports (on
all devices which sets NETIF_F_RX_UDP_TUNNEL_PORT feature) and not
UDP-port 19056. So both PFs gets this offload configuration.
$ip link set dev eth2_19504 down
This triggers udp-tunnel-core to remove the UDP-port 19504 from
offload-ports-list and offload UDP-port 19056 instead.
In this scenario it is important that the UDP-port of 19504 will be
removed from both PFs before trying to add UDP-port 19056. The NIC can
stop offloading a UDP-port only when all references are removed.
Otherwise the NIC may report exceeding of the offload quota.
Fixes: cc4e3835ef ("udp_tunnel: add central NIC RX port offload infrastructure")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 919483096b.
There is only when ip_options_get() return zero need to free.
It already called kfree() when return error.
Fixes: 919483096b ("ipv4: fix memory leaks in ip_cmsg_send() callers")
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
The GRE tunnel device can pull existing outer headers in ipge_xmit.
This is a rare path, apparently unique to this device. The below
commit ensured that pulling does not move skb->data beyond csum_start.
But it has a false positive if ip_summed is not CHECKSUM_PARTIAL and
thus csum_start is irrelevant.
Refine to exclude this. At the same time simplify and strengthen the
test.
Simplify, by moving the check next to the offending pull, making it
more self documenting and removing an unnecessary branch from other
code paths.
Strengthen, by also ensuring that the transport header is correct and
therefore the inner headers will be after skb_reset_inner_headers.
The transport header is set to csum_start in skb_partial_csum_set.
Link: https://lore.kernel.org/netdev/YS+h%2FtqCJJiQei+W@shredder/
Fixes: 1d011c4803 ("ip_gre: add validation for csum_start")
Reported-by: Ido Schimmel <idosch@idosch.org>
Suggested-by: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The commit 733c99ee8b ("net: fix NULL pointer reference in
cipso_v4_doi_free") was merged by a mistake, this patch try
to cleanup the mess.
And we already have the commit e842cb60e8 ("net: fix NULL
pointer reference in cipso_v4_doi_free") which fixed the root
cause of the issue mentioned in it's description.
Suggested-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The UDP length field should be in network order.
This removes the following sparse error:
net/ipv4/route.c:3173:27: warning: incorrect type in assignment (different base types)
net/ipv4/route.c:3173:27: expected restricted __be16 [usertype] len
net/ipv4/route.c:3173:27: got unsigned long
Fixes: 404eb77ea7 ("ipv4: support sport, dport and ip_proto in RTM_GETROUTE")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Roopa Prabhu <roopa@nvidia.com>
Cc: David Ahern <dsahern@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
bpf-next 2021-08-31
We've added 116 non-merge commits during the last 17 day(s) which contain
a total of 126 files changed, 6813 insertions(+), 4027 deletions(-).
The main changes are:
1) Add opaque bpf_cookie to perf link which the program can read out again,
to be used in libbpf-based USDT library, from Andrii Nakryiko.
2) Add bpf_task_pt_regs() helper to access userspace pt_regs, from Daniel Xu.
3) Add support for UNIX stream type sockets for BPF sockmap, from Jiang Wang.
4) Allow BPF TCP congestion control progs to call bpf_setsockopt() e.g. to switch
to another congestion control algorithm during init, from Martin KaFai Lau.
5) Extend BPF iterator support for UNIX domain sockets, from Kuniyuki Iwashima.
6) Allow bpf_{set,get}sockopt() calls from setsockopt progs, from Prankur Gupta.
7) Add bpf_get_netns_cookie() helper for BPF_PROG_TYPE_{SOCK_OPS,CGROUP_SOCKOPT}
progs, from Xu Liu and Stanislav Fomichev.
8) Support for __weak typed ksyms in libbpf, from Hao Luo.
9) Shrink struct cgroup_bpf by 504 bytes through refactoring, from Dave Marchevsky.
10) Fix a smatch complaint in verifier's narrow load handling, from Andrey Ignatov.
11) Fix BPF interpreter's tail call count limit, from Daniel Borkmann.
12) Big batch of improvements to BPF selftests, from Magnus Karlsson, Li Zhijian,
Yucong Sun, Yonghong Song, Ilya Leoshkevich, Jussi Maki, Ilya Leoshkevich, others.
13) Another big batch to revamp XDP samples in order to give them consistent look
and feel, from Kumar Kartikeya Dwivedi.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (116 commits)
MAINTAINERS: Remove self from powerpc BPF JIT
selftests/bpf: Fix potential unreleased lock
samples: bpf: Fix uninitialized variable in xdp_redirect_cpu
selftests/bpf: Reduce more flakyness in sockmap_listen
bpf: Fix bpf-next builds without CONFIG_BPF_EVENTS
bpf: selftests: Add dctcp fallback test
bpf: selftests: Add connect_to_fd_opts to network_helpers
bpf: selftests: Add sk_state to bpf_tcp_helpers.h
bpf: tcp: Allow bpf-tcp-cc to call bpf_(get|set)sockopt
selftests: xsk: Preface options with opt
selftests: xsk: Make enums lower case
selftests: xsk: Generate packets from specification
selftests: xsk: Generate packet directly in umem
selftests: xsk: Simplify cleanup of ifobjects
selftests: xsk: Decrease sending speed
selftests: xsk: Validate tx stats on tx thread
selftests: xsk: Simplify packet validation in xsk tests
selftests: xsk: Rename worker_* functions that are not thread entry points
selftests: xsk: Disassociate umem size with packets sent
selftests: xsk: Remove end-of-test packet
...
====================
Link: https://lore.kernel.org/r/20210830225618.11634-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a if statements to avoid the warning.
Dan Carpenter report:
The patch faf482ca196a: "net: ipv4: Move ip_options_fragment() out of
loop" from Aug 23, 2021, leads to the following Smatch complaint:
net/ipv4/ip_output.c:833 ip_do_fragment()
warn: variable dereferenced before check 'iter.frag' (see line 828)
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: faf482ca19 ("net: ipv4: Move ip_options_fragment() out of loop")
Link: https://lore.kernel.org/netdev/20210830073802.GR7722@kadam/T/#t
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Even after commit 6457378fe7 ("ipv4: use siphash instead of Jenkins in
fnhe_hashfun()"), an attacker can still use brute force to learn
some secrets from a victim linux host.
One way to defeat these attacks is to make the max depth of the hash
table bucket a random value.
Before this patch, each bucket of the hash table used to store exceptions
could contain 6 items under attack.
After the patch, each bucket would contains a random number of items,
between 6 and 10. The attacker can no longer infer secrets.
This is slightly increasing memory size used by the hash table,
by 50% in average, we do not expect this to be a problem.
This patch is more complex than the prior one (IPv6 equivalent),
because IPv4 was reusing the oldest entry.
Since we need to be able to evict more than one entry per
update_or_create_fnhe() call, I had to replace
fnhe_oldest() with fnhe_remove_oldest().
Also note that we will queue extra kfree_rcu() calls under stress,
which hopefully wont be a too big issue.
Fixes: 4895c771c7 ("ipv4: Add FIB nexthop exceptions.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Keyu Man <kman001@ucr.edu>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reviewed-by: David Ahern <dsahern@kernel.org>
Tested-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Clean up and consolidate ct ecache infrastructure by merging ct and
expect notifiers, from Florian Westphal.
2) Missing counters and timestamp in nfnetlink_queue and _log conntrack
information.
3) Missing error check for xt_register_template() in iptables mangle,
as a incremental fix for the previous pull request, also from
Florian Westphal.
4) Add netfilter hooks for the SRv6 lightweigh tunnel driver, from
Ryoga Sato. The hooks are enabled via nf_hooks_lwtunnel sysctl
to make sure existing netfilter rulesets do not break. There is
a static key to disable the hooks by default.
The pktgen_bench_xmit_mode_netif_receive.sh shows no noticeable
impact in the seg6_input path for non-netfilter users: similar
numbers with and without this patch.
This is a sample of the perf report output:
11.67% kpktgend_0 [ipv6] [k] ipv6_get_saddr_eval
7.89% kpktgend_0 [ipv6] [k] __ipv6_addr_label
7.52% kpktgend_0 [ipv6] [k] __ipv6_dev_get_saddr
6.63% kpktgend_0 [kernel.vmlinux] [k] asm_exc_nmi
4.74% kpktgend_0 [ipv6] [k] fib6_node_lookup_1
3.48% kpktgend_0 [kernel.vmlinux] [k] pskb_expand_head
3.33% kpktgend_0 [ipv6] [k] ip6_rcv_core.isra.29
3.33% kpktgend_0 [ipv6] [k] seg6_do_srh_encap
2.53% kpktgend_0 [ipv6] [k] ipv6_dev_get_saddr
2.45% kpktgend_0 [ipv6] [k] fib6_table_lookup
2.24% kpktgend_0 [kernel.vmlinux] [k] ___cache_free
2.16% kpktgend_0 [ipv6] [k] ip6_pol_route
2.11% kpktgend_0 [kernel.vmlinux] [k] __ipv6_addr_type
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2021-08-27
1) Remove an unneeded extra variable in esp4 esp_ssg_unref.
From Corey Minyard.
2) Add a configuration option to change the default behaviour
to block traffic if there is no matching policy.
Joint work with Christian Langrock and Antony Antony.
3) Fix a shift-out-of-bounce bug reported from syzbot.
From Pavel Skripkin.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The TCP_WINDOW_CLAMP socket option is defined in tcp(7) to "Bound the size
of the advertised window to this value." Window clamping is distributed
across two variables, window_clamp ("Maximal window to advertise" in
tcp.h) and rcv_ssthresh ("Current window clamp").
This patch updates the function where the window clamp is set to also
reduce the current window clamp, rcv_sshthresh, if needed. With this,
setting the TCP_WINDOW_CLAMP option has the documented effect of limiting
the window.
Signed-off-by: Neil Spring <ntspring@fb.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210825210117.1668371-1-ntspring@fb.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In netlbl_cipsov4_add_std() when 'doi_def->map.std' alloc
failed, we sometime observe panic:
BUG: kernel NULL pointer dereference, address:
...
RIP: 0010:cipso_v4_doi_free+0x3a/0x80
...
Call Trace:
netlbl_cipsov4_add_std+0xf4/0x8c0
netlbl_cipsov4_add+0x13f/0x1b0
genl_family_rcv_msg_doit.isra.15+0x132/0x170
genl_rcv_msg+0x125/0x240
This is because in cipso_v4_doi_free() there is no check
on 'doi_def->map.std' when 'doi_def->type' equal 1, which
is possibe, since netlbl_cipsov4_add_std() haven't initialize
it before alloc 'doi_def->map.std'.
This patch just add the check to prevent panic happen for similar
cases.
Reported-by: Abaci <abaci@linux.alibaba.com>
Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A group of security researchers brought to our attention
the weakness of hash function used in fnhe_hashfun().
Lets use siphash instead of Jenkins Hash, to considerably
reduce security risks.
Also remove the inline keyword, this really is distracting.
Fixes: d546c62154 ("ipv4: harden fnhe_hashfun()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Keyu Man <kman001@ucr.edu>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch allows the bpf-tcp-cc to call bpf_setsockopt. One use
case is to allow a bpf-tcp-cc switching to another cc during init().
For example, when the tcp flow is not ecn ready, the bpf_dctcp
can switch to another cc by calling setsockopt(TCP_CONGESTION).
During setsockopt(TCP_CONGESTION), the new tcp-cc's init() will be
called and this could cause a recursion but it is stopped by the
current trampoline's logic (in the prog->active counter).
While retiring a bpf-tcp-cc (e.g. in tcp_v[46]_destroy_sock()),
the tcp stack calls bpf-tcp-cc's release(). To avoid the retiring
bpf-tcp-cc making further changes to the sk, bpf_setsockopt is not
available to the bpf-tcp-cc's release(). This will avoid release()
making setsockopt() call that will potentially allocate new resources.
Although the bpf-tcp-cc already has a more powerful way to read tcp_sock
from the PTR_TO_BTF_ID, it is usually expected that bpf_getsockopt and
bpf_setsockopt are available together. Thus, bpf_getsockopt() is also
added to all tcp_congestion_ops except release().
When the old bpf-tcp-cc is calling setsockopt(TCP_CONGESTION)
to switch to a new cc, the old bpf-tcp-cc will be released by
bpf_struct_ops_put(). Thus, this patch also puts the bpf_struct_ops_map
after a rcu grace period because the trampoline's image cannot be freed
while the old bpf-tcp-cc is still running.
bpf-tcp-cc can only access icsk_ca_priv as SCALAR. All kernel's
tcp-cc is also accessing the icsk_ca_priv as SCALAR. The size
of icsk_ca_priv has already been raised a few times to avoid
extra kmalloc and memory referencing. The only exception is the
kernel's tcp_cdg.c that stores a kmalloc()-ed pointer in icsk_ca_priv.
To avoid the old bpf-tcp-cc accidentally overriding this tcp_cdg's pointer
value stored in icsk_ca_priv after switching and without over-complicating
the bpf's verifier for this one exception in tcp_cdg, this patch does not
allow switching to tcp_cdg. If there is a need, bpf_tcp_cdg can be
implemented and then use the bpf_sk_storage as the extended storage.
bpf_sk_setsockopt proto has only been recently added and used
in bpf-sockopt and bpf-iter-tcp, so impose the tcp_cdg limitation in the
same proto instead of adding a new proto specifically for bpf-tcp-cc.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210824173007.3976921-1-kafai@fb.com
Commit fdacd57c79 ("netfilter: x_tables: never register tables by
default") introduces the function xt_register_template(), and in one case,
a call to that function was missing the error-case handling.
Handle when xt_register_template() returns an error value.
This was identified with the clang-analyzer's Dead-Store analysis.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The ip_options_fragment() only called when iter->offset is equal to zero,
so move it out of loop, and inline 'Copy the flags to each fragment.'
As also, remove the unused parameter in ip_frag_ipcb().
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add an enum (cgroup_bpf_attach_type) containing only valid cgroup_bpf
attach types and a function to map bpf_attach_type values to the new
enum. Inspired by netns_bpf_attach_type.
Then, migrate cgroup_bpf to use cgroup_bpf_attach_type wherever
possible. Functionality is unchanged as attach_type_to_prog_type
switches in bpf/syscall.c were preventing non-cgroup programs from
making use of the invalid cgroup_bpf array slots.
As a result struct cgroup_bpf uses 504 fewer bytes relative to when its
arrays were sized using MAX_BPF_ATTACH_TYPE.
bpf_cgroup_storage is notably not migrated as struct
bpf_cgroup_storage_key is part of uapi and contains a bpf_attach_type
member which is not meant to be opaque. Similarly, bpf_cgroup_link
continues to report its bpf_attach_type member to userspace via fdinfo
and bpf_link_info.
To ease disambiguation, bpf_attach_type variables are renamed from
'type' to 'atype' when changed to cgroup_bpf_attach_type.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210819092420.1984861-2-davemarchevsky@fb.com
Validate csum_start in gre_handle_offloads before we call _gre_xmit so
that we do not crash later when the csum_start value is used in the
lco_csum function call.
This patch deals with ipv4 code.
Fixes: c544193214 ("GRE: Refactor GRE tunneling code.")
Reported-by: syzbot+ff8e1b9f2f36481e2efc@syzkaller.appspotmail.com
Signed-off-by: Shreyansh Chouhan <chouhan.shreyansh630@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add gfp_t mask as an input parameter to mem_cgroup_charge_skmem(),
to give more control to the networking stack and enable it to change
memcg charging behavior. In the future, the networking stack may decide
to avoid oom-kills when fallbacks are more appropriate.
One behavior change in mem_cgroup_charge_skmem() by this patch is to
avoid force charging by default and let the caller decide when and if
force charging is needed through the presence or absence of
__GFP_NOFAIL.
Signed-off-by: Wei Wang <weiwan@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the original TFO server code was implemented in commit
168a8f5805 ("tcp: TCP Fast Open Server -
main code path") the TFO server code has supported the sysctl bit flag
TFO_SERVER_COOKIE_NOT_REQD. Currently, when the TFO_SERVER_ENABLE and
TFO_SERVER_COOKIE_NOT_REQD sysctl bit flags are set, a server connection
will accept a SYN with N bytes of data (N > 0) that has no TFO cookie,
create a new fast open connection, process the incoming data in the SYN,
and make the connection ready for accepting. After accepting, the
connection is ready for read()/recvmsg() to read the N bytes of data in
the SYN, ready for write()/sendmsg() calls and data transmissions to
transmit data.
This commit changes an edge case in this feature by changing this
behavior to apply to (N >= 0) bytes of data in the SYN rather than only
(N > 0) bytes of data in the SYN. Now, a server will accept a data-less
SYN without a TFO cookie if TFO_SERVER_COOKIE_NOT_REQD is set.
Caveat! While this enables a new kind of TFO (data-less empty-cookie
SYN), some firewall rules setup may not work if they assume such packets
are not legit TFOs and will filter them.
Signed-off-by: Luke Hsiao <lukehsiao@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210816205105.2533289-1-luke.w.hsiao@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some arches support cmpxchg() on 4-byte and 8-byte only.
Increase mr_ifc_count width to 32bit to fix this problem.
Fixes: 4a2b285e7e ("net: igmp: fix data-race in igmp_ifc_timer_expire()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210811195715.3684218-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently if BBR congestion control is initialized after more than 2B
packets have been delivered, depending on the phase of the
tp->delivered counter the tracking of BBR round trips can get stuck.
The bug arises because if tp->delivered is between 2^31 and 2^32 at
the time the BBR congestion control module is initialized, then the
initialization of bbr->next_rtt_delivered to 0 will cause the logic to
believe that the end of the round trip is still billions of packets in
the future. More specifically, the following check will fail
repeatedly:
!before(rs->prior_delivered, bbr->next_rtt_delivered)
and thus the connection will take up to 2B packets delivered before
that check will pass and the connection will set:
bbr->round_start = 1;
This could cause many mechanisms in BBR to fail to trigger, for
example bbr_check_full_bw_reached() would likely never exit STARTUP.
This bug is 5 years old and has not been observed, and as a practical
matter this would likely rarely trigger, since it would require
transferring at least 2B packets, or likely more than 3 terabytes of
data, before switching congestion control algorithms to BBR.
This patch is a stable candidate for kernels as far back as v4.9,
when tcp_bbr.c was added.
Fixes: 0f8782ea14 ("tcp_bbr: add BBR congestion control")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Kevin Yang <yyd@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210811024056.235161-1-ncardwell@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Use nfnetlink_unicast() instead of netlink_unicast() in nft_compat.
2) Remove call to nf_ct_l4proto_find() in flowtable offload timeout
fixup.
3) CLUSTERIP registers ARP hook on demand, from Florian.
4) Use clusterip_net to store pernet warning, also from Florian.
5) Remove struct netns_xt, from Florian Westphal.
6) Enable ebtables hooks in initns on demand, from Florian.
7) Allow to filter conntrack netlink dump per status bits,
from Florian Westphal.
8) Register x_tables hooks in initns on demand, from Florian.
9) Remove queue_handler from per-netns structure, again from Florian.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
For historical reasons x_tables still register tables by default in the
initial namespace.
Only newly created net namespaces add the hook on demand.
This means that the init_net always pays hook cost, even if no filtering
rules are added (e.g. only used inside a single netns).
Note that the hooks are added even when 'iptables -L' is called.
This is because there is no way to tell 'iptables -A' and 'iptables -L'
apart at kernel level.
The only solution would be to register the table, but delay hook
registration until the first rule gets added (or policy gets changed).
That however means that counters are not hooked either, so 'iptables -L'
would always show 0-counters even when traffic is flowing which might be
unexpected.
This keeps table and hook registration consistent with what is already done
in non-init netns: first iptables(-save) invocation registers both table
and hooks.
This applies the same solution adopted for ebtables.
All tables register a template that contains the l3 family, the name
and a constructor function that is called when the initial table has to
be added.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Build failure in drivers/net/wwan/mhi_wwan_mbim.c:
add missing parameter (0, assuming we don't want buffer pre-alloc).
Conflict in drivers/net/dsa/sja1105/sja1105_main.c between:
589918df93 ("net: dsa: sja1105: be stateless with FDB entries on SJA1105P/Q/R/S/SJA1110 too")
0fac6aa098 ("net: dsa: sja1105: delete the best_effort_vlan_filtering mode")
Follow the instructions from the commit message of the former commit
- removed the if conditions. When looking at commit 589918df93 ("net:
dsa: sja1105: be stateless with FDB entries on SJA1105P/Q/R/S/SJA1110 too")
note that the mask_iotag fields get removed by the following patch.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The 'if (dev)' statement already move into dev_{put , hold}, so remove
redundant if statements.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace IP_SFLSIZE() with struct_size() helper in order to avoid any
potential type mistakes or integer overflows that, in the worst
scenario, could lead to heap overflows.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Revert the use of structr_size() and stay with IP_MSFILTER_SIZE() for
now, as in this case, the size of struct ip_msfilter didn't change with
the addition of the flexible array imsf_slist_flex[]. So, if we use
struct_size() we will be allocating and calculating the size of
struct ip_msfilter with one too many items for imsf_slist_flex[].
We might use struct_size() in the future, but for now let's stay
with IP_MSFILTER_SIZE().
Fixes: 2d3e5caf96 ("net/ipv4: Replace one-element array with flexible-array member")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass extack arg to validate_linkmsg and validate_link_af callbacks.
If a netlink attribute has a reject_message, use the extended ack
mechanism to carry the message back to user space.
Signed-off-by: Rocco Yue <rocco.yue@mediatek.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Those files under /proc/net/stat/ don't have vertical alignment, it looks
very difficult. Modify the seq_printf statement, keep vertical alignment.
v2:
- Use seq_puts() and seq_printf() correctly.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unlike skb_realloc_headroom, new helper skb_expand_head
does not allocate a new skb if possible.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ioana reported a refcount warning when booting over NFS:
[ 5.042532] ------------[ cut here ]------------
[ 5.047184] refcount_t: addition on 0; use-after-free.
[ 5.052324] WARNING: CPU: 7 PID: 1 at lib/refcount.c:25 refcount_warn_saturate+0xa4/0x150
...
[ 5.167201] Call trace:
[ 5.169635] refcount_warn_saturate+0xa4/0x150
[ 5.174067] fib_create_info+0xc00/0xc90
[ 5.177982] fib_table_insert+0x8c/0x620
[ 5.181893] fib_magic.isra.0+0x110/0x11c
[ 5.185891] fib_add_ifaddr+0xb8/0x190
[ 5.189629] fib_inetaddr_event+0x8c/0x140
fib_treeref needs to be set after kzalloc. The old code had a ++ which
led to the confusion when the int was replaced by a refcount_t.
Fixes: 79976892f7 ("net: convert fib_treeref from int to refcount_t")
Signed-off-by: David Ahern <dsahern@kernel.org>
Reported-by: Ioana Ciornei <ciorneiioana@gmail.com>
Cc: Yajun Deng <yajun.deng@linux.dev>
Tested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20210802160221.27263-1-dsahern@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a regular need in the kernel to provide a way to declare having
a dynamically sized set of trailing elements in a structure. Kernel code
should always use “flexible array members”[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].
Use an anonymous union with a couple of anonymous structs in order to
keep userspace unchanged:
$ pahole -C ip_msfilter net/ipv4/ip_sockglue.o
struct ip_msfilter {
union {
struct {
__be32 imsf_multiaddr_aux; /* 0 4 */
__be32 imsf_interface_aux; /* 4 4 */
__u32 imsf_fmode_aux; /* 8 4 */
__u32 imsf_numsrc_aux; /* 12 4 */
__be32 imsf_slist[1]; /* 16 4 */
}; /* 0 20 */
struct {
__be32 imsf_multiaddr; /* 0 4 */
__be32 imsf_interface; /* 4 4 */
__u32 imsf_fmode; /* 8 4 */
__u32 imsf_numsrc; /* 12 4 */
__be32 imsf_slist_flex[0]; /* 16 0 */
}; /* 0 16 */
}; /* 0 20 */
/* size: 20, cachelines: 1, members: 1 */
/* last cacheline: 20 bytes */
};
Also, refactor the code accordingly and make use of the struct_size()
and flex_array_size() helpers.
This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.10/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/109
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
GSO expects inner transport header offset to be valid when
skb->encapsulation flag is set. GSO uses this value to calculate the length
of an individual segment of a GSO packet in skb_gso_transport_seglen().
However, tcp/udp gro_complete callbacks don't update the
skb->inner_transport_header when processing an encapsulated TCP/UDP
segment. As a result a GRO skb has ->inner_transport_header set to a value
carried over from earlier skb processing.
This can have mild to tragic consequences. From miscalculating the GSO
segment length to triggering a page fault [1], when trying to read TCP/UDP
header at an address past the skb->data page.
The latter scenario leads to an oops report like so:
BUG: unable to handle page fault for address: ffff9fa7ec00d008
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 123f201067 P4D 123f201067 PUD 123f209067 PMD 0
Oops: 0000 [#1] SMP NOPTI
CPU: 44 PID: 0 Comm: swapper/44 Not tainted 5.4.53-cloudflare-2020.7.21 #1
Hardware name: HYVE EDGE-METAL-GEN10/HS-1811DLite1, BIOS V2.15 02/21/2020
RIP: 0010:skb_gso_transport_seglen+0x44/0xa0
Code: c0 41 83 e0 11 f6 87 81 00 00 00 20 74 30 0f b7 87 aa 00 00 00 0f [...]
RSP: 0018:ffffad8640bacbb8 EFLAGS: 00010202
RAX: 000000000000feda RBX: ffff9fcc8d31bc00 RCX: ffff9fa7ec00cffc
RDX: ffff9fa7ebffdec0 RSI: 000000000000feda RDI: 0000000000000122
RBP: 00000000000005c4 R08: 0000000000000001 R09: 0000000000000000
R10: ffff9fe588ae3800 R11: ffff9fe011fc92f0 R12: ffff9fcc8d31bc00
R13: ffff9fe0119d4300 R14: 00000000000005c4 R15: ffff9fba57d70900
FS: 0000000000000000(0000) GS:ffff9fe68df00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff9fa7ec00d008 CR3: 0000003e99b1c000 CR4: 0000000000340ee0
Call Trace:
<IRQ>
skb_gso_validate_network_len+0x11/0x70
__ip_finish_output+0x109/0x1c0
ip_sublist_rcv_finish+0x57/0x70
ip_sublist_rcv+0x2aa/0x2d0
? ip_rcv_finish_core.constprop.0+0x390/0x390
ip_list_rcv+0x12b/0x14f
__netif_receive_skb_list_core+0x2a9/0x2d0
netif_receive_skb_list_internal+0x1b5/0x2e0
napi_complete_done+0x93/0x140
veth_poll+0xc0/0x19f [veth]
? mlx5e_napi_poll+0x221/0x610 [mlx5_core]
net_rx_action+0x1f8/0x790
__do_softirq+0xe1/0x2bf
irq_exit+0x8e/0xc0
do_IRQ+0x58/0xe0
common_interrupt+0xf/0xf
</IRQ>
The bug can be observed in a simple setup where we send IP/GRE/IP/TCP
packets into a netns over a veth pair. Inside the netns, packets are
forwarded to dummy device:
trafgen -> [veth A]--[veth B] -forward-> [dummy]
For veth B to GRO aggregate packets on receive, it needs to have an XDP
program attached (for example, a trivial XDP_PASS). Additionally, for UDP,
we need to enable GSO_UDP_L4 feature on the device:
ip netns exec A ethtool -K AB rx-udp-gro-forwarding on
The last component is an artificial delay to increase the chances of GRO
batching happening:
ip netns exec A tc qdisc add dev AB root \
netem delay 200us slot 5ms 10ms packets 2 bytes 64k
With such a setup in place, the bug can be observed by tracing the skb
outer and inner offsets when GSO skb is transmitted from the dummy device:
tcp:
FUNC DEV SKB_LEN NH TH ENC INH ITH GSO_SIZE GSO_TYPE
ip_finish_output dumB 2830 270 290 1 294 254 1383 (tcpv4,gre,)
^^^
udp:
FUNC DEV SKB_LEN NH TH ENC INH ITH GSO_SIZE GSO_TYPE
ip_finish_output dumB 2818 270 290 1 294 254 1383 (gre,udp_l4,)
^^^
Fix it by updating the inner transport header offset in tcp/udp
gro_complete callbacks, similar to how {inet,ipv6}_gro_complete callbacks
update the inner network header offset, when skb->encapsulation flag is
set.
[1] https://lore.kernel.org/netdev/CAKxSbF01cLpZem2GFaUaifh0S-5WYViZemTicAg7FCHOnh6kug@mail.gmail.com/
Fixes: bf296b125b ("tcp: Add GRO support")
Fixes: f993bc25e5 ("net: core: handle encapsulation offloads when computing segment lengths")
Fixes: e20cf8d3f1 ("udp: implement GRO for plain UDP sockets.")
Reported-by: Alex Forster <aforster@cloudflare.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Do not register the arp mangling hooks from pernet init path.
As-is, load of the module is enough for these hooks to become active
in each net namespace.
Use checkentry instead so hook is only added if a CLUSTERIP rule is used.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Andrii Nakryiko says:
====================
bpf-next 2021-07-30
We've added 64 non-merge commits during the last 15 day(s) which contain
a total of 83 files changed, 5027 insertions(+), 1808 deletions(-).
The main changes are:
1) BTF-guided binary data dumping libbpf API, from Alan.
2) Internal factoring out of libbpf CO-RE relocation logic, from Alexei.
3) Ambient BPF run context and cgroup storage cleanup, from Andrii.
4) Few small API additions for libbpf 1.0 effort, from Evgeniy and Hengqi.
5) bpf_program__attach_kprobe_opts() fixes in libbpf, from Jiri.
6) bpf_{get,set}sockopt() support in BPF iterators, from Martin.
7) BPF map pinning improvements in libbpf, from Martynas.
8) Improved module BTF support in libbpf and bpftool, from Quentin.
9) Bpftool cleanups and documentation improvements, from Quentin.
10) Libbpf improvements for supporting CO-RE on old kernels, from Shuyi.
11) Increased maximum cgroup storage size, from Stanislav.
12) Small fixes and improvements to BPF tests and samples, from various folks.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (64 commits)
tools: bpftool: Complete metrics list in "bpftool prog profile" doc
tools: bpftool: Document and add bash completion for -L, -B options
selftests/bpf: Update bpftool's consistency script for checking options
tools: bpftool: Update and synchronise option list in doc and help msg
tools: bpftool: Complete and synchronise attach or map types
selftests/bpf: Check consistency between bpftool source, doc, completion
tools: bpftool: Slightly ease bash completion updates
unix_bpf: Fix a potential deadlock in unix_dgram_bpf_recvmsg()
libbpf: Add btf__load_vmlinux_btf/btf__load_module_btf
tools: bpftool: Support dumping split BTF by id
libbpf: Add split BTF support for btf__load_from_kernel_by_id()
tools: Replace btf__get_from_id() with btf__load_from_kernel_by_id()
tools: Free BTF objects at various locations
libbpf: Rename btf__get_from_id() as btf__load_from_kernel_by_id()
libbpf: Rename btf__load() as btf__load_into_kernel()
libbpf: Return non-null error on failures in libbpf_find_prog_btf_id()
bpf: Emit better log message if bpf_iter ctx arg btf_id == 0
tools/resolve_btfids: Emit warnings and patch zero id for missing symbols
bpf: Increase supported cgroup storage value size
libbpf: Fix race when pinning maps in parallel
...
====================
Link: https://lore.kernel.org/r/20210730225606.1897330-1-andrii@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
refcount_t type should be used instead of int when fib_treeref is used as
a reference counter,and avoid use-after-free risks.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20210729071350.28919-1-yajun.deng@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The various ipv4 and ipv6 tunnel drivers each implement a set
of 12 SIOCDEVPRIVATE commands for managing tunnels. These
all work correctly in compat mode.
Move them over to the new .ndo_siocdevprivate operation.
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: David Ahern <dsahern@kernel.org>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously, a DSACK could expand the RACK reordering window when no
reordering has been seen, and/or when the DSACK was due to an
unnecessary TLP retransmit (rather than a spurious fast recovery due
to reordering). This could result in unnecessarily growing the RACK
reordering window and thus unnecessarily delaying RACK-based fast
recovery episodes.
To avoid these issues, this commit tightens the conditions under which
a DSACK triggers the RACK reordering window to grow, so that a
connection only expands its RACK reordering window if:
(a) reordering has been seen in the connection
(b) a DSACKed range does not match the most recent TLP retransmit
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously TLP is considered spurious if the sender receives any
DSACK during a TLP episode. This patch further checks the DSACK
sequences match the TLP's to improve accuracy.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the following out-of-bounds warning:
In function 'ip_copy_addrs',
inlined from '__ip_queue_xmit' at net/ipv4/ip_output.c:517:2:
net/ipv4/ip_output.c:449:2: warning: 'memcpy' offset [40, 43] from the object at 'fl' is out of the bounds of referenced subobject 'saddr' with type 'unsigned int' at offset 36 [-Warray-bounds]
449 | memcpy(&iph->saddr, &fl4->saddr,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
450 | sizeof(fl4->saddr) + sizeof(fl4->daddr));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The problem is that the original code is trying to copy data into a
couple of struct members adjacent to each other in a single call to
memcpy(). This causes a legitimate compiler warning because memcpy()
overruns the length of &iph->saddr and &fl4->saddr. As these are just
a couple of struct members, fix this by using direct assignments,
instead of memcpy().
This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().
Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/d5ae2e65-1f18-2577-246f-bada7eee6ccd@intel.com/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch allows bpf tcp iter to call bpf_(get|set)sockopt.
To allow a specific bpf iter (tcp here) to call a set of helpers,
get_func_proto function pointer is added to bpf_iter_reg.
The bpf iter is a tracing prog which currently requires
CAP_PERFMON or CAP_SYS_ADMIN, so this patch does not
impose other capability checks for bpf_(get|set)sockopt.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210701200619.1036715-1-kafai@fb.com
This patch does batching and lock_sock for the bpf tcp iter.
It does not affect the proc fs iteration.
With bpf-tcp-cc, new algo rollout happens more often. Instead of
restarting the application to pick up the new tcp-cc, the next patch
will allow bpf iter to do setsockopt(TCP_CONGESTION). This requires
locking the sock.
Also, unlike the proc iteration (cat /proc/net/tcp[6]), the bpf iter
can inspect all fields of a tcp_sock. It will be useful to have a
consistent view on some of the fields (e.g. the ones reported in
tcp_get_info() that also acquires the sock lock).
Double lock: locking the bucket first and then locking the sock could
lead to deadlock. This patch takes a batching approach similar to
inet_diag. While holding the bucket lock, it batch a number of sockets
into an array first and then unlock the bucket. Before doing show(),
it then calls lock_sock_fast().
In a machine with ~400k connections, the maximum number of
sk in a bucket of the established hashtable is 7. 0.02% of
the established connections fall into this bucket size.
For listen hash (port+addr lhash2), the bucket is usually very
small also except for the SO_REUSEPORT use case which the
userspace could have one SO_REUSEPORT socket per thread.
While batching is used, it can also minimize the chance of missing
sock in the setsockopt use case if the whole bucket is batched.
This patch will start with a batch array with INIT_BATCH_SZ (16)
which will be enough for the most common cases. bpf_iter_tcp_batch()
will try to realloc to a larger array to handle exception case (e.g.
the SO_REUSEPORT case in the lhash2).
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210701200613.1036157-1-kafai@fb.com
This patch moves the tcp seq_file iteration on listeners
from the port only listening_hash to the port+addr lhash2.
When iterating from the bpf iter, the next patch will need to
lock the socket such that the bpf iter can call setsockopt (e.g. to
change the TCP_CONGESTION). To avoid locking the bucket and then locking
the sock, the bpf iter will first batch some sockets from the same bucket
and then unlock the bucket. If the bucket size is small (which
usually is), it is easier to batch the whole bucket such that it is less
likely to miss a setsockopt on a socket due to changes in the bucket.
However, the port only listening_hash could have many listeners
hashed to a bucket (e.g. many individual VIP(s):443 and also
multiple by the number of SO_REUSEPORT). We have seen bucket size in
tens of thousands range. Also, the chance of having changes
in some popular port buckets (e.g. 443) is also high.
The port+addr lhash2 was introduced to solve this large listener bucket
issue. Also, the listening_hash usage has already been replaced with
lhash2 in the fast path inet[6]_lookup_listener(). This patch follows
the same direction on moving to lhash2 and iterates the lhash2
instead of listening_hash.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210701200606.1035783-1-kafai@fb.com
The current listening_get_next() is overloaded by passing
NULL to the 2nd arg, like listening_get_next(seq, NULL), to
mean get_first().
This patch moves some logic from the listening_get_next() into
a new function listening_get_first(). It will be equivalent
to the current established_get_first() and established_get_next()
setup. get_first() is to find a non empty bucket and return
the first sk. get_next() is to find the next sk of the current
bucket and then resorts to get_first() if the current bucket is
exhausted.
The next patch is to move the listener seq_file iteration from
listening_hash (port only) to lhash2 (port+addr).
Separating out listening_get_first() from listening_get_next()
here will make the following lhash2 changes cleaner and easier to
follow.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210701200600.1035353-1-kafai@fb.com
A following patch will create a separate struct to store extra
bpf_iter state and it will embed the existing tcp_iter_state like this:
struct bpf_tcp_iter_state {
struct tcp_iter_state state;
/* More bpf_iter specific states here ... */
}
As a prep work, this patch removes the
"struct tcp_seq_afinfo *bpf_seq_afinfo" where its purpose is
to tell if it is iterating from bpf_iter instead of proc fs.
Currently, if "*bpf_seq_afinfo" is not NULL, it is iterating from
bpf_iter. The kernel should not filter by the addr family and
leave this filtering decision to the bpf prog.
Instead of adding a "*bpf_seq_afinfo" pointer, this patch uses the
"seq->op == &bpf_iter_tcp_seq_ops" test to tell if it is iterating
from the bpf iter.
The bpf_iter_(init|fini)_tcp() is left here to prepare for
the change of a following patch.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210701200554.1034982-1-kafai@fb.com
This patch refactors the net and family matching into
two new helpers, seq_sk_match() and seq_file_family().
seq_file_family() is in the later part of the file to prepare
the change of a following patch.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210701200548.1034629-1-kafai@fb.com
st->bucket stores the current bucket number.
st->offset stores the offset within this bucket that is the sk to be
seq_show(). Thus, st->offset only makes sense within the same
st->bucket.
These two variables are an optimization for the common no-lseek case.
When resuming the seq_file iteration (i.e. seq_start()),
tcp_seek_last_pos() tries to continue from the st->offset
at bucket st->bucket.
However, it is possible that the bucket pointed by st->bucket
has changed and st->offset may end up skipping the whole st->bucket
without finding a sk. In this case, tcp_seek_last_pos() currently
continues to satisfy the offset condition in the next (and incorrect)
bucket. Instead, regardless of the offset value, the first sk of the
next bucket should be returned. Thus, "bucket == st->bucket" check is
added to tcp_seek_last_pos().
The chance of hitting this is small and the issue is a decade old,
so targeting for the next tree.
Fixes: a8b690f98b ("tcp: Fix slowness in read /proc/net/tcp")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210701200541.1033917-1-kafai@fb.com
In cases where the header straight after the tunnel header was
another ethernet header (TEB), instead of the network header,
the ECN decapsulation code would treat the ethernet header as if
it was an IP header, resulting in mishandling and possible
wrong drops or corruption of the IP header.
In this case, ECT(1) is sent, so IP_ECN_decapsulate tries to copy it to the
inner IPv4 header, and correct its checksum.
The offset of the ECT bits in an IPv4 header corresponds to the
lower 2 bits of the second octet of the destination MAC address
in the ethernet header.
The IPv4 checksum corresponds to end of the source address.
In order to reproduce:
$ ip netns add A
$ ip netns add B
$ ip -n A link add _v0 type veth peer name _v1 netns B
$ ip -n A link set _v0 up
$ ip -n A addr add dev _v0 10.254.3.1/24
$ ip -n A route add default dev _v0 scope global
$ ip -n B link set _v1 up
$ ip -n B addr add dev _v1 10.254.1.6/24
$ ip -n B route add default dev _v1 scope global
$ ip -n B link add gre1 type gretap local 10.254.1.6 remote 10.254.3.1 key 0x49000000
$ ip -n B link set gre1 up
# Now send an IPv4/GRE/Eth/IPv4 frame where the outer header has ECT(1),
# and the inner header has no ECT bits set:
$ cat send_pkt.py
#!/usr/bin/env python3
from scapy.all import *
pkt = IP(b'E\x01\x00\xa7\x00\x00\x00\x00@/`%\n\xfe\x03\x01\n\xfe\x01\x06 \x00eXI\x00'
b'\x00\x00\x18\xbe\x92\xa0\xee&\x18\xb0\x92\xa0l&\x08\x00E\x00\x00}\x8b\x85'
b'@\x00\x01\x01\xe4\xf2\x82\x82\x82\x01\x82\x82\x82\x02\x08\x00d\x11\xa6\xeb'
b'3\x1e\x1e\\xf3\\xf7`\x00\x00\x00\x00ZN\x00\x00\x00\x00\x00\x00\x10\x11\x12'
b'\x13\x14\x15\x16\x17\x18\x19\x1a\x1b\x1c\x1d\x1e\x1f !"#$%&\'()*+,-./01234'
b'56789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ')
send(pkt)
$ sudo ip netns exec B tcpdump -neqlllvi gre1 icmp & ; sleep 1
$ sudo ip netns exec A python3 send_pkt.py
In the original packet, the source/destinatio MAC addresses are
dst=18:be:92:a0:ee:26 src=18:b0:92:a0:6c:26
In the received packet, they are
dst=18:bd:92:a0:ee:26 src=18:b0:92:a0:6c:27
Thanks to Lahav Schlesinger <lschlesinger@drivenets.com> and Isaac Garzon <isaac@speed.io>
for helping me pinpoint the origin.
Fixes: b723748750 ("tunnel: Propagate ECT(1) when decapsulating as recommended by RFC6040")
Cc: David S. Miller <davem@davemloft.net>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: David Ahern <dsahern@kernel.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Gilad Naaman <gnaaman@drivenets.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
compat_ifreq_ioctl() is one of the last users of copy_in_user() and
compat_alloc_user_space(), as it attempts to convert the 'struct ifreq'
arguments from 32-bit to 64-bit format as used by dev_ioctl() and a
couple of socket family specific interpretations.
The current implementation works correctly when calling dev_ioctl(),
inet_ioctl(), ieee802154_sock_ioctl(), atalk_ioctl(), qrtr_ioctl()
and packet_ioctl(). The ioctl handlers for x25, netrom, rose and x25 do
not interpret the arguments and only block the corresponding commands,
so they do not care.
For af_inet6 and af_decnet however, the compat conversion is slightly
incorrect, as it will copy more data than the native handler accesses,
both of them use a structure that is shorter than ifreq.
Replace the copy_in_user() conversion with a pair of accessor functions
to read and write the ifreq data in place with the correct length where
needed, while leaving the other ones to copy the (already compatible)
structures directly.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since dynamic registration of the gifconf() helper is only used for
IPv4, and this can not be in a loadable module, this can be simplified
noticeably by turning it into a direct function call as a preparation
for cleaning up the compat handling.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Multiple complaints have been raised from the TFO users on the internet
stating that the TFO blackhole logic is too aggressive and gets falsely
triggered too often.
(e.g. https://blog.apnic.net/2021/07/05/tcp-fast-open-not-so-fast/)
Considering that most middleboxes no longer drop TFO packets, we decide
to disable the blackhole logic by setting
/proc/sys/net/ipv4/tcp_fastopen_blackhole_timeout_set to 0 by default.
Fixes: cf1ef3f071 ("net/tcp_fastopen: Disable active side TFO in certain scenarios")
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcp_grow_window() is using skb->len/skb->truesize to increase tp->rcv_ssthresh
which has a direct impact on advertized window sizes.
We added TCP coalescing in linux-3.4 & linux-3.5:
Instead of storing skbs with one or two MSS in receive queue (or OFO queue),
we try to append segments together to reduce memory overhead.
High performance network drivers tend to cook skb with 3 parts :
1) sk_buff structure (256 bytes)
2) skb->head contains room to copy headers as needed, and skb_shared_info
3) page fragment(s) containing the ~1514 bytes frame (or more depending on MTU)
Once coalesced into a previous skb, 1) and 2) are freed.
We can therefore tweak the way we compute len/truesize ratio knowing
that skb->truesize is inflated by 1) and 2) soon to be freed.
This is done only for in-order skb, or skb coalesced into OFO queue.
The result is that low rate flows no longer pay the memory price of having
low GRO aggregation factor. Same result for drivers not using GRO.
This is critical to allow a big enough receiver window,
typically tcp_rmem[2] / 2.
We have been using this at Google for about 5 years, it is due time
to make it upstream.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For tcp sockets, sk->sk_write_space is most probably sk_stream_write_space().
Other sk->sk_write_space() calls in TCP are slow path and do not deserve
any change.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit d26796ae58 ("udp: check udp sock encap_type in __udp_lib_err")
added checks for encapsulated sockets but it broke cases when there is
no implementation of encap_err_lookup for encapsulation, i.e. ESP in
UDP encapsulation. Fix it by calling encap_err_lookup only if socket
implements this method otherwise treat it as legal socket.
Fixes: d26796ae58 ("udp: check udp sock encap_type in __udp_lib_err")
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Consolidate IPv4 MTU code the same way it is done in IPv6 to have code
aligned in both address families
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Root in init user namespace can modify /proc/sys/net/ipv4/ip_forward
without CAP_NET_ADMIN, this doesn't follow the principle of
capabilities. For example, let's take a look at netdev_store(),
root can't modify netdev attribute without CAP_NET_ADMIN.
So let's keep the consistency of permission check logic.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Yang Yang <yang.yang29@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
It's assigned twice, but only used to calculate the size of the
structure it points to. Just remove it and take a sizeof the
actual structure.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Paolo Abeni says:
====================
veth: more flexible channels number configuration
XDP setups can benefit from multiple veth RX/TX queues. Currently
veth allow setting such number only at creation time via the
'numrxqueues' and 'numtxqueues' parameters.
This series introduces support for the ethtool set_channel operation
and allows configuring the queue number via a new module parameter.
The veth default configuration is not changed.
Finally self-tests are updated to check the new features, with both
valid and invalid arguments.
This iteration is a rebase of the most recent RFC, it does not provide
a module parameter to configure the default number of queues, but I
think could be worthy
RFC v1 -> RFC v2:
- report more consistent 'combined' count
- make set_channel as resilient as possible to errors
- drop module parameter - but I would still consider it.
- more self-tests
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
net namespace can create up to 64K tcp and dccp ports and force kernel
to allocate up to several megabytes of memory per netns
for inet_bind_bucket objects.
It makes sense to account for them to restrict the host's memory
consumption from inside the memcg-limited container.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
An netadmin inside container can use 'ip a a' and 'ip r a'
to assign a large number of ipv4/ipv6 addresses and routing entries
and force kernel to allocate megabytes of unaccounted memory
for long-lived per-netdevice related kernel objects:
'struct in_ifaddr', 'struct inet6_ifaddr', 'struct fib6_node',
'struct rt6_info', 'struct fib_rules' and ip_fib caches.
These objects can be manually removed, though usually they lives
in memory till destroy of its net namespace.
It makes sense to account for them to restrict the host's memory
consumption from inside the memcg-limited container.
One of such objects is the 'struct fib6_node' mostly allocated in
net/ipv6/route.c::__ip6_ins_rt() inside the lock_bh()/unlock_bh() section:
write_lock_bh(&table->tb6_lock);
err = fib6_add(&table->tb6_root, rt, info, mxc);
write_unlock_bh(&table->tb6_lock);
In this case it is not enough to simply add SLAB_ACCOUNT to corresponding
kmem cache. The proper memory cgroup still cannot be found due to the
incorrect 'in_interrupt()' check used in memcg_kmem_bypass().
Obsoleted in_interrupt() does not describe real execution context properly.
>From include/linux/preempt.h:
The following macros are deprecated and should not be used in new code:
in_interrupt() - We're in NMI,IRQ,SoftIRQ context or have BH disabled
To verify the current execution context new macro should be used instead:
in_task() - We're in task context
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tfo_active_disable_stamp is read and written locklessly.
We need to annotate these accesses appropriately.
Then, we need to perform the atomic_inc(tfo_active_disable_times)
after the timestamp has been updated, and thus add barriers
to make sure tcp_fastopen_active_should_disable() wont read
a stale timestamp.
Fixes: cf1ef3f071 ("net/tcp_fastopen: Disable active side TFO in certain scenarios")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Wei Wang <weiwan@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-07-15
The following pull-request contains BPF updates for your *net-next* tree.
We've added 45 non-merge commits during the last 15 day(s) which contain
a total of 52 files changed, 3122 insertions(+), 384 deletions(-).
The main changes are:
1) Introduce bpf timers, from Alexei.
2) Add sockmap support for unix datagram socket, from Cong.
3) Fix potential memleak and UAF in the verifier, from He.
4) Add bpf_get_func_ip helper, from Jiri.
5) Improvements to generic XDP mode, from Kumar.
6) Support for passing xdp_md to XDP programs in bpf_prog_run, from Zvi.
===================
Signed-off-by: David S. Miller <davem@davemloft.net>
TCP and other connection oriented sockets have accept()
for each incoming connection on the server side, hence
they can just insert those fd's from accept() to sockmap,
which are of course established.
Now with datagram sockets begin to support sockmap and
redirection, the restriction is no longer applicable to
them, as they have no accept(). So we have to lift this
restriction for them. This is fine, because inside
bpf_sk_redirect_map() we still have another socket status
check, sock_map_redirect_allowed(), as a guard.
This also means they do not have to be removed from
sockmap when disconnecting.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210704190252.11866-3-xiyou.wangcong@gmail.com
Andrii Nakryiko says:
====================
pull-request: bpf 2021-07-15
The following pull-request contains BPF updates for your *net* tree.
We've added 9 non-merge commits during the last 5 day(s) which contain
a total of 9 files changed, 37 insertions(+), 15 deletions(-).
The main changes are:
1) Fix NULL pointer dereference in BPF_TEST_RUN for BPF_XDP_DEVMAP and
BPF_XDP_CPUMAP programs, from Xuan Zhuo.
2) Fix use-after-free of net_device in XDP bpf_link, from Xuan Zhuo.
3) Follow-up fix to subprog poke descriptor use-after-free problem, from
Daniel Borkmann and John Fastabend.
4) Fix out-of-range array access in s390 BPF JIT backend, from Colin Ian King.
5) Fix memory leak in BPF sockmap, from John Fastabend.
6) Fix for sockmap to prevent proc stats reporting bug, from John Fastabend
and Jakub Sitnicki.
7) Fix NULL pointer dereference in bpftool, from Tobias Klauser.
8) AF_XDP documentation fixes, from Baruch Siach.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The proc socket stats use sk_prot->inuse_idx value to record inuse sock
stats. We currently do not set this correctly from sockmap side. The
result is reading sock stats '/proc/net/sockstat' gives incorrect values.
The socket counter is incremented correctly, but because we don't set the
counter correctly when we replace sk_prot we may omit the decrement.
To get the correct inuse_idx value move the core_initcall that initializes
the UDP proto handlers to late_initcall. This way it is initialized after
UDP has the chance to assign the inuse_idx value from the register protocol
handler.
Fixes: edc6741cc6 ("bpf: Add sockmap hooks for UDP sockets")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210714154750.528206-1-jakub@cloudflare.com
The proc socket stats use sk_prot->inuse_idx value to record inuse sock
stats. We currently do not set this correctly from sockmap side. The
result is reading sock stats '/proc/net/sockstat' gives incorrect values.
The socket counter is incremented correctly, but because we don't set the
counter correctly when we replace sk_prot we may omit the decrement.
To get the correct inuse_idx value move the core_initcall that initializes
the TCP proto handlers to late_initcall. This way it is initialized after
TCP has the chance to assign the inuse_idx value from the register protocol
handler.
Fixes: 604326b41a ("bpf, sockmap: convert to generic sk_msg interface")
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/bpf/20210712195546.423990-3-john.fastabend@gmail.com
It has 'if (err >0 )' statement in nlmsg_unicast(), so use nlmsg_unicast()
instead of netlink_unicast(), this looks more concise.
v2: remove the change in netfilter.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
If check_fully_established() causes a subflow reset, it should not
continue to process the packet in tcp_data_queue().
Add a return value to mptcp_incoming_options(), and return false if a
subflow has been reset, else return true. Then drop the packet in
tcp_data_queue()/tcp_rcv_state_process() if mptcp_incoming_options()
return false.
Fixes: d582484726 ("mptcp: fix fallback for MP_JOIN subflows")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 28e104d002 ("net: ip_tunnel: fix mtu calculation") removed
dev->hard_header_len subtraction when calculate MTU for tunnel devices
as there is an overhead for device that has header_ops.
But there are ETHER tunnel devices, like gre_tap or erspan, which don't
have header_ops but set dev->hard_header_len during setup. This makes
pkts greater than (MTU - ETH_HLEN) could not be xmited. Fix it by
subtracting the ETHER tunnel devices' dev->hard_header_len for MTU
calculation.
Fixes: 28e104d002 ("net: ip_tunnel: fix mtu calculation")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sk_wmem_schedule makes sure that sk_forward_alloc has enough
bytes for charging that is going to be done by sk_mem_charge.
In the transmit zerocopy path, there is sk_mem_charge but there was
no call to sk_wmem_schedule. This change adds that call.
Without this call to sk_wmem_schedule, sk_forward_alloc can go
negetive which is a bug because sk_forward_alloc is a per-socket
space that has been forward charged so this can't be negative.
Fixes: f214f915e7 ("tcp: enable MSG_ZEROCOPY")
Signed-off-by: Talal Ahmad <talalahmad@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Wei Wang <weiwan@google.com>
Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While TCP stack scales reasonably well, there is still one part that
can be used to DDOS it.
IPv6 Packet too big messages have to lookup/insert a new route,
and if abused by attackers, can easily put hosts under high stress,
with many cpus contending on a spinlock while one is stuck in fib6_run_gc()
ip6_protocol_deliver_rcu()
icmpv6_rcv()
icmpv6_notify()
tcp_v6_err()
tcp_v6_mtu_reduced()
inet6_csk_update_pmtu()
ip6_rt_update_pmtu()
__ip6_rt_update_pmtu()
ip6_rt_cache_alloc()
ip6_dst_alloc()
dst_alloc()
ip6_dst_gc()
fib6_run_gc()
spin_lock_bh() ...
Some of our servers have been hit by malicious ICMPv6 packets
trying to _increase_ the MTU/MSS of TCP flows.
We believe these ICMPv6 packets are a result of a bug in one ISP stack,
since they were blindly sent back for _every_ (small) packet sent to them.
These packets are for one TCP flow:
09:24:36.266491 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240
09:24:36.266509 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240
09:24:36.316688 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240
09:24:36.316704 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240
09:24:36.608151 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240
TCP stack can filter some silly requests :
1) MTU below IPV6_MIN_MTU can be filtered early in tcp_v6_err()
2) tcp_v6_mtu_reduced() can drop requests trying to increase current MSS.
This tests happen before the IPv6 routing stack is entered, thus
removing the potential contention and route exhaustion.
Note that IPv6 stack was performing these checks, but too late
(ie : after the route has been added, and after the potential
garbage collect war)
v2: fix typo caught by Martin, thanks !
v3: exports tcp_mtu_to_mss(), caught by David, thanks !
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit fixes a bug (found by syzkaller) that could cause spurious
double-initializations for congestion control modules, which could cause
memory leaks or other problems for congestion control modules (like CDG)
that allocate memory in their init functions.
The buggy scenario constructed by syzkaller was something like:
(1) create a TCP socket
(2) initiate a TFO connect via sendto()
(3) while socket is in TCP_SYN_SENT, call setsockopt(TCP_CONGESTION),
which calls:
tcp_set_congestion_control() ->
tcp_reinit_congestion_control() ->
tcp_init_congestion_control()
(4) receive ACK, connection is established, call tcp_init_transfer(),
set icsk_ca_initialized=0 (without first calling cc->release()),
call tcp_init_congestion_control() again.
Note that in this sequence tcp_init_congestion_control() is called
twice without a cc->release() call in between. Thus, for CC modules
that allocate memory in their init() function, e.g, CDG, a memory leak
may occur. The syzkaller tool managed to find a reproducer that
triggered such a leak in CDG.
The bug was introduced when that commit 8919a9b31e ("tcp: Only init
congestion control if not initialized already")
introduced icsk_ca_initialized and set icsk_ca_initialized to 0 in
tcp_init_transfer(), missing the possibility for a sequence like the
one above, where a process could call setsockopt(TCP_CONGESTION) in
state TCP_SYN_SENT (i.e. after the connect() or TFO open sendmsg()),
which would call tcp_init_congestion_control(). It did not intend to
reset any initialization that the user had already explicitly made;
it just missed the possibility of that particular sequence (which
syzkaller managed to find).
Fixes: 8919a9b31e ("tcp: Only init congestion control if not initialized already")
Reported-by: syzbot+f1e24a0594d4e3a895d3@syzkaller.appspotmail.com
Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If an UDP packet enters the GRO engine but is not eligible
for aggregation and is not targeting an UDP tunnel,
udp_gro_receive() will not set the flush bit, and packet
could delayed till the next napi flush.
Fix the issue ensuring non GROed packets traverse
skb_gro_flush_final().
Reported-and-tested-by: Matthias Treydte <mt@waldheinz.de>
Fixes: 18f25dc399 ("udp: skip L4 aggregation for UDP tunnel packets")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While tp->mtu_info is read while socket is owned, the write
sides happen from err handlers (tcp_v[46]_mtu_reduced)
which only own the socket spinlock.
Fixes: 563d34d057 ("tcp: dont drop MTU reduction indications")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Core:
- BPF:
- add syscall program type and libbpf support for generating
instructions and bindings for in-kernel BPF loaders (BPF loaders
for BPF), this is a stepping stone for signed BPF programs
- infrastructure to migrate TCP child sockets from one listener
to another in the same reuseport group/map to improve flexibility
of service hand-off/restart
- add broadcast support to XDP redirect
- allow bypass of the lockless qdisc to improving performance
(for pktgen: +23% with one thread, +44% with 2 threads)
- add a simpler version of "DO_ONCE()" which does not require
jump labels, intended for slow-path usage
- virtio/vsock: introduce SOCK_SEQPACKET support
- add getsocketopt to retrieve netns cookie
- ip: treat lowest address of a IPv4 subnet as ordinary unicast address
allowing reclaiming of precious IPv4 addresses
- ipv6: use prandom_u32() for ID generation
- ip: add support for more flexible field selection for hashing
across multi-path routes (w/ offload to mlxsw)
- icmp: add support for extended RFC 8335 PROBE (ping)
- seg6: add support for SRv6 End.DT46 behavior
- mptcp:
- DSS checksum support (RFC 8684) to detect middlebox meddling
- support Connection-time 'C' flag
- time stamping support
- sctp: packetization Layer Path MTU Discovery (RFC 8899)
- xfrm: speed up state addition with seq set
- WiFi:
- hidden AP discovery on 6 GHz and other HE 6 GHz improvements
- aggregation handling improvements for some drivers
- minstrel improvements for no-ack frames
- deferred rate control for TXQs to improve reaction times
- switch from round robin to virtual time-based airtime scheduler
- add trace points:
- tcp checksum errors
- openvswitch - action execution, upcalls
- socket errors via sk_error_report
Device APIs:
- devlink: add rate API for hierarchical control of max egress rate
of virtual devices (VFs, SFs etc.)
- don't require RCU read lock to be held around BPF hooks
in NAPI context
- page_pool: generic buffer recycling
New hardware/drivers:
- mobile:
- iosm: PCIe Driver for Intel M.2 Modem
- support for Qualcomm MSM8998 (ipa)
- WiFi: Qualcomm QCN9074 and WCN6855 PCI devices
- sparx5: Microchip SparX-5 family of Enterprise Ethernet switches
- Mellanox BlueField Gigabit Ethernet (control NIC of the DPU)
- NXP SJA1110 Automotive Ethernet 10-port switch
- Qualcomm QCA8327 switch support (qca8k)
- Mikrotik 10/25G NIC (atl1c)
Driver changes:
- ACPI support for some MDIO, MAC and PHY devices from Marvell and NXP
(our first foray into MAC/PHY description via ACPI)
- HW timestamping (PTP) support: bnxt_en, ice, sja1105, hns3, tja11xx
- Mellanox/Nvidia NIC (mlx5)
- NIC VF offload of L2 bridging
- support IRQ distribution to Sub-functions
- Marvell (prestera):
- add flower and match all
- devlink trap
- link aggregation
- Netronome (nfp): connection tracking offload
- Intel 1GE (igc): add AF_XDP support
- Marvell DPU (octeontx2): ingress ratelimit offload
- Google vNIC (gve): new ring/descriptor format support
- Qualcomm mobile (rmnet & ipa): inline checksum offload support
- MediaTek WiFi (mt76)
- mt7915 MSI support
- mt7915 Tx status reporting
- mt7915 thermal sensors support
- mt7921 decapsulation offload
- mt7921 enable runtime pm and deep sleep
- Realtek WiFi (rtw88)
- beacon filter support
- Tx antenna path diversity support
- firmware crash information via devcoredump
- Qualcomm 60GHz WiFi (wcn36xx)
- Wake-on-WLAN support with magic packets and GTK rekeying
- Micrel PHY (ksz886x/ksz8081): add cable test support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=LvtX
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- BPF:
- add syscall program type and libbpf support for generating
instructions and bindings for in-kernel BPF loaders (BPF loaders
for BPF), this is a stepping stone for signed BPF programs
- infrastructure to migrate TCP child sockets from one listener to
another in the same reuseport group/map to improve flexibility
of service hand-off/restart
- add broadcast support to XDP redirect
- allow bypass of the lockless qdisc to improving performance (for
pktgen: +23% with one thread, +44% with 2 threads)
- add a simpler version of "DO_ONCE()" which does not require jump
labels, intended for slow-path usage
- virtio/vsock: introduce SOCK_SEQPACKET support
- add getsocketopt to retrieve netns cookie
- ip: treat lowest address of a IPv4 subnet as ordinary unicast
address allowing reclaiming of precious IPv4 addresses
- ipv6: use prandom_u32() for ID generation
- ip: add support for more flexible field selection for hashing
across multi-path routes (w/ offload to mlxsw)
- icmp: add support for extended RFC 8335 PROBE (ping)
- seg6: add support for SRv6 End.DT46 behavior
- mptcp:
- DSS checksum support (RFC 8684) to detect middlebox meddling
- support Connection-time 'C' flag
- time stamping support
- sctp: packetization Layer Path MTU Discovery (RFC 8899)
- xfrm: speed up state addition with seq set
- WiFi:
- hidden AP discovery on 6 GHz and other HE 6 GHz improvements
- aggregation handling improvements for some drivers
- minstrel improvements for no-ack frames
- deferred rate control for TXQs to improve reaction times
- switch from round robin to virtual time-based airtime scheduler
- add trace points:
- tcp checksum errors
- openvswitch - action execution, upcalls
- socket errors via sk_error_report
Device APIs:
- devlink: add rate API for hierarchical control of max egress rate
of virtual devices (VFs, SFs etc.)
- don't require RCU read lock to be held around BPF hooks in NAPI
context
- page_pool: generic buffer recycling
New hardware/drivers:
- mobile:
- iosm: PCIe Driver for Intel M.2 Modem
- support for Qualcomm MSM8998 (ipa)
- WiFi: Qualcomm QCN9074 and WCN6855 PCI devices
- sparx5: Microchip SparX-5 family of Enterprise Ethernet switches
- Mellanox BlueField Gigabit Ethernet (control NIC of the DPU)
- NXP SJA1110 Automotive Ethernet 10-port switch
- Qualcomm QCA8327 switch support (qca8k)
- Mikrotik 10/25G NIC (atl1c)
Driver changes:
- ACPI support for some MDIO, MAC and PHY devices from Marvell and
NXP (our first foray into MAC/PHY description via ACPI)
- HW timestamping (PTP) support: bnxt_en, ice, sja1105, hns3, tja11xx
- Mellanox/Nvidia NIC (mlx5)
- NIC VF offload of L2 bridging
- support IRQ distribution to Sub-functions
- Marvell (prestera):
- add flower and match all
- devlink trap
- link aggregation
- Netronome (nfp): connection tracking offload
- Intel 1GE (igc): add AF_XDP support
- Marvell DPU (octeontx2): ingress ratelimit offload
- Google vNIC (gve): new ring/descriptor format support
- Qualcomm mobile (rmnet & ipa): inline checksum offload support
- MediaTek WiFi (mt76)
- mt7915 MSI support
- mt7915 Tx status reporting
- mt7915 thermal sensors support
- mt7921 decapsulation offload
- mt7921 enable runtime pm and deep sleep
- Realtek WiFi (rtw88)
- beacon filter support
- Tx antenna path diversity support
- firmware crash information via devcoredump
- Qualcomm WiFi (wcn36xx)
- Wake-on-WLAN support with magic packets and GTK rekeying
- Micrel PHY (ksz886x/ksz8081): add cable test support"
* tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2168 commits)
tcp: change ICSK_CA_PRIV_SIZE definition
tcp_yeah: check struct yeah size at compile time
gve: DQO: Fix off by one in gve_rx_dqo()
stmmac: intel: set PCI_D3hot in suspend
stmmac: intel: Enable PHY WOL option in EHL
net: stmmac: option to enable PHY WOL with PMT enabled
net: say "local" instead of "static" addresses in ndo_dflt_fdb_{add,del}
net: use netdev_info in ndo_dflt_fdb_{add,del}
ptp: Set lookup cookie when creating a PTP PPS source.
net: sock: add trace for socket errors
net: sock: introduce sk_error_report
net: dsa: replay the local bridge FDB entries pointing to the bridge dev too
net: dsa: ensure during dsa_fdb_offload_notify that dev_hold and dev_put are on the same dev
net: dsa: include fdb entries pointing to bridge in the host fdb list
net: dsa: include bridge addresses which are local in the host fdb list
net: dsa: sync static FDB entries on foreign interfaces to hardware
net: dsa: install the host MDB and FDB entries in the master's RX filter
net: dsa: reference count the FDB addresses at the cross-chip notifier level
net: dsa: introduce a separate cross-chip notifier type for host FDBs
net: dsa: reference count the MDB entries at the cross-chip notifier level
...
Merge misc updates from Andrew Morton:
"191 patches.
Subsystems affected by this patch series: kthread, ia64, scripts,
ntfs, squashfs, ocfs2, kernel/watchdog, and mm (gup, pagealloc, slab,
slub, kmemleak, dax, debug, pagecache, gup, swap, memcg, pagemap,
mprotect, bootmem, dma, tracing, vmalloc, kasan, initialization,
pagealloc, and memory-failure)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (191 commits)
mm,hwpoison: make get_hwpoison_page() call get_any_page()
mm,hwpoison: send SIGBUS with error virutal address
mm/page_alloc: split pcp->high across all online CPUs for cpuless nodes
mm/page_alloc: allow high-order pages to be stored on the per-cpu lists
mm: replace CONFIG_FLAT_NODE_MEM_MAP with CONFIG_FLATMEM
mm: replace CONFIG_NEED_MULTIPLE_NODES with CONFIG_NUMA
docs: remove description of DISCONTIGMEM
arch, mm: remove stale mentions of DISCONIGMEM
mm: remove CONFIG_DISCONTIGMEM
m68k: remove support for DISCONTIGMEM
arc: remove support for DISCONTIGMEM
arc: update comment about HIGHMEM implementation
alpha: remove DISCONTIGMEM and NUMA
mm/page_alloc: move free_the_page
mm/page_alloc: fix counting of managed_pages
mm/page_alloc: improve memmap_pages dbg msg
mm: drop SECTION_SHIFT in code comments
mm/page_alloc: introduce vm.percpu_pagelist_high_fraction
mm/page_alloc: limit the number of pages on PCP lists when reclaim is active
mm/page_alloc: scale the number of pages that are batch freed
...
Trivial conflict in net/netfilter/nf_tables_api.c.
Duplicate fix in tools/testing/selftests/net/devlink_port_split.py
- take the net-next version.
skmsg, and L4 bpf - keep the bpf code but remove the flags
and err params.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Compiler can perform the sanity check instead of waiting
to load the module and crash the host.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch introduces a function wrapper to call the sk_error_report
callback. That will prepare to add additional handling whenever
sk_error_report is called, for example to trace socket errors.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use vma_lookup() to find the VMA at a specific address. As vma_lookup()
will return NULL if the address is not within any VMA, the start address
no longer needs to be validated.
Link: https://lkml.kernel.org/r/20210521174745.2219620-13-Liam.Howlett@Oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Cc: David Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hi Linus,
Please, pull the following patches that fix many fall-through warnings
when building with Clang 12.0.0 and this[1] change reverted. Notice
that in order to enable -Wimplicit-fallthrough for Clang, such change[1]
is meant to be reverted at some point. So, these patches help to move
in that direction.
Thanks!
[1] commit e2079e93f5 ("kbuild: Do not enable -Wimplicit-fallthrough for clang for now")
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEkmRahXBSurMIg1YvRwW0y0cG2zEFAmDaNe8ACgkQRwW0y0cG
2zFfGA/9G1A/Hrf261/P9olyYe2TRBwLnO1tUDREm3qtJ2JdKpf+7EM3VDm+Ue/A
qhNmwp5G7nmp7Nqq8MfbdFjeo/rPS67voXiOfO8b0pU+E4XlOc+B1BXL0BWtnP7b
xvuauklQU6dmCp2u44vsxdBIO6ooR0uQh+7/+1la+mPyEk9mlooQ4lyFcpfA53yt
zxEGrx0tZBrDXghEI1CkHxOaJaX3qhw4EUYvxe8n2L7Dgx+o2djL/G4/SRYH/xoq
MZa8TLyCuR3J0Ph4TfDONhMmf8ZLn+j70xBhewcVfZ1JfvGSVw4DQNN44KZCDnrK
tGsBo5VFksjbmX83LmT8UlqB1rTP4nVQtRmtOPvbQA9kd19yy+Y64Y58FcGU2FHl
PWt3rQJ1JzBo3TtzQoz7HSJCt9QTil4U7hFbNtcp5BbWQfUPkRgpWcL3FOchZbZ6
FnLMqHanw2lrKMzZEoyHvg6G7BT67k3rrFgtd/xGSn8ohtfKXaZBYa9PKrQ0LwuG
o8tQtIX1owj4rbdI1t6Ob4X/tT6Y7DzH8nsF+TsJQ4XeSCD2rURUcYltBMIlEr16
DFj7iWKIrrX80/JRsBXu7a9h8nn5YptxV12SGRq/Cu/2jfRwjDye4IzsCyqMf67n
oEN6YC1XYaEUmKXTnI8Z0CxY0qwSTcNjeH5Ci9jWepinsqD3Jxw=
=Kt2q
-----END PGP SIGNATURE-----
Merge tag 'fallthrough-fixes-clang-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull fallthrough fixes from Gustavo Silva:
"Fix many fall-through warnings when building with Clang 12.0.0 and
'-Wimplicit-fallthrough' so that we at some point will be able to
enable that warning by default"
* tag 'fallthrough-fixes-clang-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: (26 commits)
rxrpc: Fix fall-through warnings for Clang
drm/nouveau/clk: Fix fall-through warnings for Clang
drm/nouveau/therm: Fix fall-through warnings for Clang
drm/nouveau: Fix fall-through warnings for Clang
xfs: Fix fall-through warnings for Clang
xfrm: Fix fall-through warnings for Clang
tipc: Fix fall-through warnings for Clang
sctp: Fix fall-through warnings for Clang
rds: Fix fall-through warnings for Clang
net/packet: Fix fall-through warnings for Clang
net: netrom: Fix fall-through warnings for Clang
ide: Fix fall-through warnings for Clang
hwmon: (max6621) Fix fall-through warnings for Clang
hwmon: (corsair-cpro) Fix fall-through warnings for Clang
firewire: core: Fix fall-through warnings for Clang
braille_console: Fix fall-through warnings for Clang
ipv4: Fix fall-through warnings for Clang
qlcnic: Fix fall-through warnings for Clang
bnxt_en: Fix fall-through warnings for Clang
netxen_nic: Fix fall-through warnings for Clang
...
This patch builds off of commit 2b246b2569
and adds functionality to respond to ICMPV6 PROBE requests.
Add icmp_build_probe function to construct PROBE requests for both
ICMPV4 and ICMPV6.
Modify icmpv6_rcv to detect ICMPV6 PROBE messages and call the
icmpv6_echo_reply handler.
Modify icmpv6_echo_reply to build a PROBE response message based on the
queried interface.
This patch has been tested using a branch of the iputils git repo which can
be found here: https://github.com/Juniper-Clinic-2020/iputils/tree/probe-request
Signed-off-by: Andreas Roeseler <andreas.a.roeseler@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2021-06-28
1) Remove an unneeded error assignment in esp4_gro_receive().
From Yang Li.
2) Add a new byseq state hashtable to find acquire states faster.
From Sabrina Dubroca.
3) Remove some unnecessary variables in pfkey_create().
From zuoqilin.
4) Remove the unused description from xfrm_type struct.
From Florian Westphal.
5) Fix a spelling mistake in the comment of xfrm_state_ok().
From gushengxian.
6) Replace hdr_off indirections by a small helper function.
From Florian Westphal.
7) Remove xfrm4_output_finish and xfrm6_output_finish declarations,
they are not used anymore.From Antony Antony.
8) Remove xfrm replay indirections.
From Florian Westphal.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit e271c7b442 ("gre: do not keep the GRE header around in collect
medata mode") did reset the mac_header for the collect_md case. Let's
extend this behaviour to classical gre devices as well.
ipgre_header_parse() seems to be the only case that requires mac_header
to point to the outer header. We can detect this case accurately by
checking ->header_ops. For all other cases, we can reset mac_header.
This allows to push an Ethernet header to ipgre packets and redirect
them to an Ethernet device:
$ tc filter add dev gre0 ingress matchall \
action vlan push_eth dst_mac 00:00:5e:00:53:01 \
src_mac 00:00:5e:00:53:00 \
action mirred egress redirect dev eth0
Before this patch, this worked only for collect_md gre devices.
Now this works for regular gre devices as well. Only the special case
of gre devices that use ipgre_header_ops isn't supported.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Even though ipip transports IPv4 or MPLS packets, it needs to reset the
mac_header pointer, so that other parts of the stack don't mistakenly
access the outer header after the packet has been decapsulated.
This allows to push an Ethernet header to ipip or mplsip packets and
redirect them to an Ethernet device:
$ tc filter add dev ipip0 ingress matchall \
action vlan push_eth dst_mac 00:00:5e:00:53:01 \
src_mac 00:00:5e:00:53:00 \
action mirred egress redirect dev eth0
Without this patch, push_eth refuses to add an ethernet header because
the skb appears to already have a MAC header.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 14972cbd34 ("net: lwtunnel: Handle fragmentation") moved
fragmentation logic away from lwtunnel by carry encap headroom and
use it in output MTU calculation. But the forwarding part was not
covered and created difference in MTU for output and forwarding and
further to silent drops on ipv4 forwarding path. Fix it by taking
into account lwtunnel encap headroom.
The same commit also introduced difference in how to treat RTAX_MTU
in IPv4 and IPv6 where latter explicitly removes lwtunnel encap
headroom from route MTU. Make IPv4 version do the same.
Fixes: 14972cbd34 ("net: lwtunnel: Handle fragmentation")
Suggested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dave observed number of machines hitting OOM on the UDP send
path. The workload seems to be sending large UDP packets over
loopback. Since loopback has MTU of 64k kernel will try to
allocate an skb with up to 64k of head space. This has a good
chance of failing under memory pressure. What's worse if
the message length is <32k the allocation may trigger an
OOM killer.
This is entirely avoidable, we can use an skb with page frags.
af_unix solves a similar problem by limiting the head
length to SKB_MAX_ALLOC. This seems like a good and simple
approach. It means that UDP messages > 16kB will now
use fragments if underlying device supports SG, if extra
allocator pressure causes regressions in real workloads
we can switch to trying the large allocation first and
falling back.
v4: pre-calculate all the additions to alloclen so
we can be sure it won't go over order-2
Reported-by: Dave Jones <dsj@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf 2021-06-23
The following pull-request contains BPF updates for your *net* tree.
We've added 14 non-merge commits during the last 6 day(s) which contain
a total of 13 files changed, 137 insertions(+), 64 deletions(-).
Note that when you merge net into net-next, there is a small merge conflict
between 9f2470fbc4 ("skmsg: Improve udp_bpf_recvmsg() accuracy") from bpf
with c49661aa6f ("skmsg: Remove unused parameters of sk_msg_wait_data()")
from net-next. Resolution is to: i) net/ipv4/udp_bpf.c: take udp_msg_wait_data()
and remove err parameter from the function, ii) net/ipv4/tcp_bpf.c: take
tcp_msg_wait_data() and remove err parameter from the function, iii) for
net/core/skmsg.c and include/linux/skmsg.h: remove the sk_msg_wait_data()
implementation and its prototype in header.
The main changes are:
1) Fix BPF poke descriptor adjustments after insn rewrite, from John Fastabend.
2) Fix regression when using BPF_OBJ_GET with non-O_RDWR flags, from Maciej Żenczykowski.
3) Various bug and error handling fixes for UDP-related sock_map, from Cong Wang.
4) Fix patching of vmlinux BTF IDs with correct endianness, from Tony Ambardar.
5) Two fixes for TX descriptor validation in AF_XDP, from Magnus Karlsson.
6) Fix overflow in size calculation for bpf_map_area_alloc(), from Bui Quang Minh.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit adds two stats for the socket migration feature to evaluate the
effectiveness: LINUX_MIB_TCPMIGRATEREQ(SUCCESS|FAILURE).
If the migration fails because of the own_req race in receiving ACK and
sending SYN+ACK paths, we do not increment the failure stat. Then another
CPU is responsible for the req.
Link: https://lore.kernel.org/bpf/CAK6E8=cgFKuGecTzSCSQ8z3YJ_163C0uwO9yRvfDSE7vOe9mJA@mail.gmail.com/
Suggested-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net): ipsec 2021-06-23
1) Don't return a mtu smaller than 1280 on IPv6 pmtu discovery.
From Sabrina Dubroca
2) Fix seqcount rcu-read side in xfrm_policy_lookup_bytype
for the PREEMPT_RT case. From Varad Gautam.
3) Remove a repeated declaration of xfrm_parse_spi.
From Shaokun Zhang.
4) IPv4 beet mode can't handle fragments, but IPv6 does.
commit 68dc022d04 ("xfrm: BEET mode doesn't support
fragments for inner packets") handled IPv4 and IPv6
the same way. Relax the check for IPv6 because fragments
are possible here. From Xin Long.
5) Memory allocation failures are not reported for
XFRMA_ENCAP and XFRMA_COADDR in xfrm_state_construct.
Fix this by moving both cases in front of the function.
6) Fix a missing initialization in the xfrm offload fallback
fail case for bonding devices. From Ayush Sawal.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When doing source address validation, the flowi4 struct used for
fib_lookup should be in the reverse direction to the given skb.
fl4_dport and fl4_sport returned by fib4_rules_early_flow_dissect
should thus be swapped.
Fixes: 5a847a6e14 ("net/ipv4: Initialize proto and ports in flow struct")
Signed-off-by: Miao Wang <shankerwangmiao@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
sk_psock_verdict_recv() clones the skb and uses the clone
afterward, so udp_read_sock() should free the skb after using
it, regardless of error or not.
This fixes a real kmemleak.
Fixes: d7f571188e ("udp: Implement ->read_sock() for sockmap")
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210615021342.7416-4-xiyou.wangcong@gmail.com
I tried to reuse sk_msg_wait_data() for different protocols,
but it turns out it can not be simply reused. For example,
UDP actually uses two queues to receive skb:
udp_sk(sk)->reader_queue and sk->sk_receive_queue. So we have
to check both of them to know whether we have received any
packet.
Also, UDP does not lock the sock during BH Rx path, it makes
no sense for its ->recvmsg() to lock the sock. It is always
possible for ->recvmsg() to be called before packets actually
arrive in the receive queue, we just use best effort to make
it accurate here.
Fixes: 1f5be6b3b0 ("udp: Implement udp_bpf_recvmsg() for sockmap")
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210615021342.7416-2-xiyou.wangcong@gmail.com
Trivial conflicts in net/can/isotp.c and
tools/testing/selftests/net/mptcp/mptcp_connect.sh
scaled_ppm_to_ppb() was moved from drivers/ptp/ptp_clock.c
to include/linux/ptp_clock_kernel.h in -next so re-apply
the fix there.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When constructing ICMP response messages, the kernel will try to pick a
suitable source address for the outgoing packet. However, if no IPv4
addresses are configured on the system at all, this will fail and we end up
producing an ICMP message with a source address of 0.0.0.0. This can happen
on a box routing IPv4 traffic via v6 nexthops, for instance.
Since 0.0.0.0 is not generally routable on the internet, there's a good
chance that such ICMP messages will never make it back to the sender of the
original packet that the ICMP message was sent in response to. This, in
turn, can create connectivity and PMTUd problems for senders. Fortunately,
RFC7600 reserves a dummy address to be used as a source for ICMP
messages (192.0.0.8/32), so let's teach the kernel to substitute that
address as a last resort if the regular source address selection procedure
fails.
Below is a quick example reproducing this issue with network namespaces:
ip netns add ns0
ip l add type veth peer netns ns0
ip l set dev veth0 up
ip a add 10.0.0.1/24 dev veth0
ip a add fc00:dead:cafe:42::1/64 dev veth0
ip r add 10.1.0.0/24 via inet6 fc00:dead:cafe:42::2
ip -n ns0 l set dev veth0 up
ip -n ns0 a add fc00:dead:cafe:42::2/64 dev veth0
ip -n ns0 r add 10.0.0.0/24 via inet6 fc00:dead:cafe:42::1
ip netns exec ns0 sysctl -w net.ipv4.icmp_ratelimit=0
ip netns exec ns0 sysctl -w net.ipv4.ip_forward=1
tcpdump -tpni veth0 -c 2 icmp &
ping -w 1 10.1.0.1 > /dev/null
tcpdump: verbose output suppressed, use -v[v]... for full protocol decode
listening on veth0, link-type EN10MB (Ethernet), snapshot length 262144 bytes
IP 10.0.0.1 > 10.1.0.1: ICMP echo request, id 29, seq 1, length 64
IP 0.0.0.0 > 10.0.0.1: ICMP net 10.1.0.1 unreachable, length 92
2 packets captured
2 packets received by filter
0 packets dropped by kernel
With this patch the above capture changes to:
IP 10.0.0.1 > 10.1.0.1: ICMP echo request, id 31127, seq 1, length 64
IP 192.0.0.8 > 10.0.0.1: ICMP net 10.1.0.1 unreachable, length 92
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Juliusz Chroboczek <jch@irif.fr>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf-next 2021-06-17
The following pull-request contains BPF updates for your *net-next* tree.
We've added 50 non-merge commits during the last 25 day(s) which contain
a total of 148 files changed, 4779 insertions(+), 1248 deletions(-).
The main changes are:
1) BPF infrastructure to migrate TCP child sockets from a listener to another
in the same reuseport group/map, from Kuniyuki Iwashima.
2) Add a provably sound, faster and more precise algorithm for tnum_mul() as
noted in https://arxiv.org/abs/2105.05398, from Harishankar Vishwanathan.
3) Streamline error reporting changes in libbpf as planned out in the
'libbpf: the road to v1.0' effort, from Andrii Nakryiko.
4) Add broadcast support to xdp_redirect_map(), from Hangbin Liu.
5) Extends bpf_map_lookup_and_delete_elem() functionality to 4 more map
types, that is, {LRU_,PERCPU_,LRU_PERCPU_,}HASH, from Denis Salopek.
6) Support new LLVM relocations in libbpf to make them more linker friendly,
also add a doc to describe the BPF backend relocations, from Yonghong Song.
7) Silence long standing KUBSAN complaints on register-based shifts in
interpreter, from Daniel Borkmann and Eric Biggers.
8) Add dummy PT_REGS macros in libbpf to fail BPF program compilation when
target arch cannot be determined, from Lorenz Bauer.
9) Extend AF_XDP to support large umems with 1M+ pages, from Magnus Karlsson.
10) Fix two minor libbpf tc BPF API issues, from Kumar Kartikeya Dwivedi.
11) Move libbpf BPF_SEQ_PRINTF/BPF_SNPRINTF macros that can be used by BPF
programs to bpf_helpers.h header, from Florent Revest.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
BUG: memory leak
unreferenced object 0xffff888101bc4c00 (size 32):
comm "syz-executor527", pid 360, jiffies 4294807421 (age 19.329s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
01 00 00 00 00 00 00 00 ac 14 14 bb 00 00 02 00 ................
backtrace:
[<00000000f17c5244>] kmalloc include/linux/slab.h:558 [inline]
[<00000000f17c5244>] kzalloc include/linux/slab.h:688 [inline]
[<00000000f17c5244>] ip_mc_add1_src net/ipv4/igmp.c:1971 [inline]
[<00000000f17c5244>] ip_mc_add_src+0x95f/0xdb0 net/ipv4/igmp.c:2095
[<000000001cb99709>] ip_mc_source+0x84c/0xea0 net/ipv4/igmp.c:2416
[<0000000052cf19ed>] do_ip_setsockopt net/ipv4/ip_sockglue.c:1294 [inline]
[<0000000052cf19ed>] ip_setsockopt+0x114b/0x30c0 net/ipv4/ip_sockglue.c:1423
[<00000000477edfbc>] raw_setsockopt+0x13d/0x170 net/ipv4/raw.c:857
[<00000000e75ca9bb>] __sys_setsockopt+0x158/0x270 net/socket.c:2117
[<00000000bdb993a8>] __do_sys_setsockopt net/socket.c:2128 [inline]
[<00000000bdb993a8>] __se_sys_setsockopt net/socket.c:2125 [inline]
[<00000000bdb993a8>] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2125
[<000000006a1ffdbd>] do_syscall_64+0x40/0x80 arch/x86/entry/common.c:47
[<00000000b11467c4>] entry_SYSCALL_64_after_hwframe+0x44/0xae
In commit 24803f38a5 ("igmp: do not remove igmp souce list info when set
link down"), the ip_mc_clear_src() in ip_mc_destroy_dev() was removed,
because it was also called in igmpv3_clear_delrec().
Rough callgraph:
inetdev_destroy
-> ip_mc_destroy_dev
-> igmpv3_clear_delrec
-> ip_mc_clear_src
-> RCU_INIT_POINTER(dev->ip_ptr, NULL)
However, ip_mc_clear_src() called in igmpv3_clear_delrec() doesn't
release in_dev->mc_list->sources. And RCU_INIT_POINTER() assigns the
NULL to dev->ip_ptr. As a result, in_dev cannot be obtained through
inetdev_by_index() and then in_dev->mc_list->sources cannot be released
by ip_mc_del1_src() in the sock_close. Rough call sequence goes like:
sock_close
-> __sock_release
-> inet_release
-> ip_mc_drop_socket
-> inetdev_by_index
-> ip_mc_leave_src
-> ip_mc_del_src
-> ip_mc_del1_src
So we still need to call ip_mc_clear_src() in ip_mc_destroy_dev() to free
in_dev->mc_list->sources.
Fixes: 24803f38a5 ("igmp: do not remove igmp souce list info ...")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Chengyang Fan <cy.fan@huawei.com>
Acked-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Timewait sockets have included mark since approx 4.18.
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jon Maxwell <jmaxwell37@gmail.com>
Fixes: 0048369055 ("tcp: Add mark for TIMEWAIT sockets")
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jon Maxwell <jmaxwell37@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch also changes the code to call reuseport_migrate_sock() and
inet_reqsk_clone(), but unlike the other cases, we do not call
inet_reqsk_clone() right after reuseport_migrate_sock().
Currently, in the receive path for TCP_NEW_SYN_RECV sockets, its listener
has three kinds of refcnt:
(A) for listener itself
(B) carried by reuqest_sock
(C) sock_hold() in tcp_v[46]_rcv()
While processing the req, (A) may disappear by close(listener). Also, (B)
can disappear by accept(listener) once we put the req into the accept
queue. So, we have to hold another refcnt (C) for the listener to prevent
use-after-free.
For socket migration, we call reuseport_migrate_sock() to select a listener
with (A) and to increment the new listener's refcnt in tcp_v[46]_rcv().
This refcnt corresponds to (C) and is cleaned up later in tcp_v[46]_rcv().
Thus we have to take another refcnt (B) for the newly cloned request_sock.
In inet_csk_complete_hashdance(), we hold the count (B), clone the req, and
try to put the new req into the accept queue. By migrating req after
winning the "own_req" race, we can avoid such a worst situation:
CPU 1 looks up req1
CPU 2 looks up req1, unhashes it, then CPU 1 loses the race
CPU 3 looks up req2, unhashes it, then CPU 2 loses the race
...
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210612123224.12525-8-kuniyu@amazon.co.jp
As with the preceding patch, this patch changes reqsk_timer_handler() to
call reuseport_migrate_sock() and inet_reqsk_clone() to migrate in-flight
requests at retransmitting SYN+ACKs. If we can select a new listener and
clone the request, we resume setting the SYN+ACK timer for the new req. If
we can set the timer, we call inet_ehash_insert() to unhash the old req and
put the new req into ehash.
The noteworthy point here is that by unhashing the old req, another CPU
processing it may lose the "own_req" race in tcp_v[46]_syn_recv_sock() and
drop the final ACK packet. However, the new timer will recover this
situation.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210612123224.12525-7-kuniyu@amazon.co.jp
When we call close() or shutdown() for listening sockets, each child socket
in the accept queue are freed at inet_csk_listen_stop(). If we can get a
new listener by reuseport_migrate_sock() and clone the request by
inet_reqsk_clone(), we try to add it into the new listener's accept queue
by inet_csk_reqsk_queue_add(). If it fails, we have to call __reqsk_free()
to call sock_put() for its listener and free the cloned request.
After putting the full socket into ehash, tcp_v[46]_syn_recv_sock() sets
NULL to ireq_opt/pktopts in struct inet_request_sock, but ipv6_opt can be
non-NULL. So, we have to set NULL to ipv6_opt of the old request to avoid
double free.
Note that we do not update req->rsk_listener and instead clone the req to
migrate because another path may reference the original request. If we
protected it by RCU, we would need to add rcu_read_lock() in many places.
Suggested-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/netdev/20201209030903.hhow5r53l6fmozjn@kafai-mbp.dhcp.thefacebook.com/
Link: https://lore.kernel.org/bpf/20210612123224.12525-6-kuniyu@amazon.co.jp
When we close a listening socket, to migrate its connections to another
listener in the same reuseport group, we have to handle two kinds of child
sockets. One is that a listening socket has a reference to, and the other
is not.
The former is the TCP_ESTABLISHED/TCP_SYN_RECV sockets, and they are in the
accept queue of their listening socket. So we can pop them out and push
them into another listener's queue at close() or shutdown() syscalls. On
the other hand, the latter, the TCP_NEW_SYN_RECV socket is during the
three-way handshake and not in the accept queue. Thus, we cannot access
such sockets at close() or shutdown() syscalls. Accordingly, we have to
migrate immature sockets after their listening socket has been closed.
Currently, if their listening socket has been closed, TCP_NEW_SYN_RECV
sockets are freed at receiving the final ACK or retransmitting SYN+ACKs. At
that time, if we could select a new listener from the same reuseport group,
no connection would be aborted. However, we cannot do that because
reuseport_detach_sock() sets NULL to sk_reuseport_cb and forbids access to
the reuseport group from closed sockets.
This patch allows TCP_CLOSE sockets to remain in the reuseport group and
access it while any child socket references them. The point is that
reuseport_detach_sock() was called twice from inet_unhash() and
sk_destruct(). This patch replaces the first reuseport_detach_sock() with
reuseport_stop_listen_sock(), which checks if the reuseport group is
capable of migration. If capable, it decrements num_socks, moves the socket
backwards in socks[] and increments num_closed_socks. When all connections
are migrated, sk_destruct() calls reuseport_detach_sock() to remove the
socket from socks[], decrement num_closed_socks, and set NULL to
sk_reuseport_cb.
By this change, closed or shutdowned sockets can keep sk_reuseport_cb.
Consequently, calling listen() after shutdown() can cause EADDRINUSE or
EBUSY in inet_csk_bind_conflict() or reuseport_add_sock() which expects
such sockets not to have the reuseport group. Therefore, this patch also
loosens such validation rules so that a socket can listen again if it has a
reuseport group with num_closed_socks more than 0.
When such sockets listen again, we handle them in reuseport_resurrect(). If
there is an existing reuseport group (reuseport_add_sock() path), we move
the socket from the old group to the new one and free the old one if
necessary. If there is no existing group (reuseport_alloc() path), we
allocate a new reuseport group, detach sk from the old one, and free it if
necessary, not to break the current shutdown behaviour:
- we cannot carry over the eBPF prog of shutdowned sockets
- we cannot attach/detach an eBPF prog to/from listening sockets via
shutdowned sockets
Note that when the number of sockets gets over U16_MAX, we try to detach a
closed socket randomly to make room for the new listening socket in
reuseport_grow().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/bpf/20210612123224.12525-4-kuniyu@amazon.co.jp
This commit adds a new sysctl option: net.ipv4.tcp_migrate_req. If this
option is enabled or eBPF program is attached, we will be able to migrate
child sockets from a listener to another in the same reuseport group after
close() or shutdown() syscalls.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Benjamin Herrenschmidt <benh@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210612123224.12525-2-kuniyu@amazon.co.jp
Oliver reported a use case where deleting a VRF device can hang
waiting for the refcnt to drop to 0. The root cause is that the dst
is allocated against the VRF device but cached on the loopback
device.
The use case (added to the selftests) has an implicit VRF crossing
due to the ordering of the FIB rules (lookup local is before the
l3mdev rule, but the problem occurs even if the FIB rules are
re-ordered with local after l3mdev because the VRF table does not
have a default route to terminate the lookup). The end result is
is that the FIB lookup returns the loopback device as the nexthop,
but the ingress device is in a VRF. The mismatch causes the dst
alloc against the VRF device but then cached on the loopback.
The fix is to bring the trick used for IPv6 (see ip6_rt_get_dev_rcu):
pick the dst alloc device based the fib lookup result but with checks
that the result has a nexthop device (e.g., not an unreachable or
prohibit entry).
Fixes: f5a0aab84b ("net: ipv4: dst for local input routes should use l3mdev if relevant")
Reported-by: Oliver Herms <oliver.peter.herms@gmail.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Function 'ping_queue_rcv_skb' not always return success, which will
also return fail. If not check the wrong return value of it, lead to function
`ping_rcv` return success.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kaustubh reported and diagnosed a panic in udp_lib_lookup().
The root cause is udp_abort() racing with close(). Both
racing functions acquire the socket lock, but udp{v6}_destroy_sock()
release it before performing destructive actions.
We can't easily extend the socket lock scope to avoid the race,
instead use the SOCK_DEAD flag to prevent udp_abort from doing
any action when the critical race happens.
Diagnosed-and-tested-by: Kaustubh Pandey <kapandey@codeaurora.org>
Fixes: 5d77dca828 ("net: diag: support SOCK_DESTROY for UDP sockets")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Both functions are known to be racy when reading inet_num
as we do not want to grab locks for the common case the socket
has been bound already. The race is resolved in inet_autobind()
by reading again inet_num under the socket lock.
syzbot reported:
BUG: KCSAN: data-race in inet_send_prepare / udp_lib_get_port
write to 0xffff88812cba150e of 2 bytes by task 24135 on cpu 0:
udp_lib_get_port+0x4b2/0xe20 net/ipv4/udp.c:308
udp_v6_get_port+0x5e/0x70 net/ipv6/udp.c:89
inet_autobind net/ipv4/af_inet.c:183 [inline]
inet_send_prepare+0xd0/0x210 net/ipv4/af_inet.c:807
inet6_sendmsg+0x29/0x80 net/ipv6/af_inet6.c:639
sock_sendmsg_nosec net/socket.c:654 [inline]
sock_sendmsg net/socket.c:674 [inline]
____sys_sendmsg+0x360/0x4d0 net/socket.c:2350
___sys_sendmsg net/socket.c:2404 [inline]
__sys_sendmmsg+0x315/0x4b0 net/socket.c:2490
__do_sys_sendmmsg net/socket.c:2519 [inline]
__se_sys_sendmmsg net/socket.c:2516 [inline]
__x64_sys_sendmmsg+0x53/0x60 net/socket.c:2516
do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47
entry_SYSCALL_64_after_hwframe+0x44/0xae
read to 0xffff88812cba150e of 2 bytes by task 24132 on cpu 1:
inet_send_prepare+0x21/0x210 net/ipv4/af_inet.c:806
inet6_sendmsg+0x29/0x80 net/ipv6/af_inet6.c:639
sock_sendmsg_nosec net/socket.c:654 [inline]
sock_sendmsg net/socket.c:674 [inline]
____sys_sendmsg+0x360/0x4d0 net/socket.c:2350
___sys_sendmsg net/socket.c:2404 [inline]
__sys_sendmmsg+0x315/0x4b0 net/socket.c:2490
__do_sys_sendmmsg net/socket.c:2519 [inline]
__se_sys_sendmmsg net/socket.c:2516 [inline]
__x64_sys_sendmmsg+0x53/0x60 net/socket.c:2516
do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47
entry_SYSCALL_64_after_hwframe+0x44/0xae
value changed: 0x0000 -> 0x9db4
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 24132 Comm: syz-executor.2 Not tainted 5.13.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Its set but never read. Reduces size of xfrm_type to 64 bytes on 64bit.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
When 'nla_parse_nested_deprecated' failed, it's no need to
BUG() here, return -EINVAL is ok.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix some spelling mistakes in comments:
Dont ==> Don't
timout ==> timeout
incomming ==> incoming
necesarry ==> necessary
substract ==> subtract
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
MPTCP is builtin, so no need to add EXPORT_SYMBOL()s.
It will be used to support SO_TIMESTAMP(NS) ancillary
messages in the mptcp receive path.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Including <linux/in.h> and <netinet/in.h> in the dependencies breaks
compilation of trinity due to multiple definitions. <linux/in.h> is only
used in <linux/icmp.h> to provide the definition of the struct in_addr,
but this can be substituted out by using the datatype __be32.
Signed-off-by: Andreas Roeseler <andreas.a.roeseler@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch aims to improve the situation when reordering and loss are
ocurring in the same flight of packets.
Previously the reordering would first induce a spurious recovery, then
the subsequent ACK may undo the cwnd (based on the timestamps e.g.).
However the current loss recovery does not proceed to invoke
RACK to install a reordering timer. If some packets are also lost, this
may lead to a long RTO-based recovery. An example is
https://groups.google.com/g/bbr-dev/c/OFHADvJbTEI
The solution is to after reverting the recovery, always invoke RACK
to either mount the RACK timer to fast retransmit after the reordering
window, or restarts the recovery if new loss is identified. Hence
it is possible the sender may go from Recovery to Disorder/Open to
Recovery again in one ACK.
Reported-by: mingkun bian <bianmingkun@gmail.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the user specifies a hostname or domain name as part of the ip=
command-line option, preserve it and don't overwrite it with one
supplied by DHCP/BOOTP.
For instance, ip=::::myhostname::dhcp will use "myhostname" rather than
ignoring and overwriting it.
Fix the comment on ic_bootp_string that suggests it only copies a string
"if not already set"; it doesn't have any such logic.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Support for SCTP chunks matching on nf_tables, from Phil Sutter.
2) Skip LDMXCSR, we don't need a valid MXCSR state. From Stefano Brivio.
3) CONFIG_RETPOLINE for nf_tables set lookups, from Florian Westphal.
4) A few Kconfig leading spaces removal, from Juerg Haefliger.
5) Remove spinlock from xt_limit, from Jason Baron.
6) Remove useless initialization in xt_CT, oneliner from Yang Li.
7) Tree-wide replacement of netlink_unicast() by nfnetlink_unicast().
8) Reduce footprint of several structures: xt_action_param,
nft_pktinfo and nf_hook_state, from Florian.
10) Add nft_thoff() and nft_sk() helpers and use them, also from Florian.
11) Fix documentation in nf_tables pipapo avx2, from Florian Westphal.
12) Fix clang-12 fmt string warnings, also from Florian.
====================
When kalloc or kmemdup failed, should return ENOMEM rather than ENOBUF.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This allows to change storage placement later on without changing readers.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-05-19
The following pull-request contains BPF updates for your *net-next* tree.
We've added 43 non-merge commits during the last 11 day(s) which contain
a total of 74 files changed, 3717 insertions(+), 578 deletions(-).
The main changes are:
1) syscall program type, fd array, and light skeleton, from Alexei.
2) Stop emitting static variables in skeleton, from Andrii.
3) Low level tc-bpf api, from Kumar.
4) Reduce verifier kmalloc/kfree churn, from Lorenz.
====================
In-kernel notifications are already sent when the multipath hash policy
itself changes, but not when the multipath hash fields change.
Add these notifications, so that interested listeners (e.g., switch ASIC
drivers) could perform the necessary configuration.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since cipso_v4_cache_invalidate() has no return value, so drop
related descriptions in its comments.
Fixes: 446fda4f26 ("[NetLabel]: CIPSOv4 engine")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new multipath hash policy where the packet fields used for hash
calculation are determined by user space via the
fib_multipath_hash_fields sysctl that was introduced in the previous
patch.
The current set of available packet fields includes both outer and inner
fields, which requires two invocations of the flow dissector. Avoid
unnecessary dissection of the outer or inner flows by skipping
dissection if none of the outer or inner fields are required.
In accordance with the existing policies, when an skb is not available,
packet fields are extracted from the provided flow key. In which case,
only outer fields are considered.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
A subsequent patch will add a new multipath hash policy where the packet
fields used for multipath hash calculation are determined by user space.
This patch adds a sysctl that allows user space to set these fields.
The packet fields are represented using a bitmask and are common between
IPv4 and IPv6 to allow user space to use the same numbering across both
protocols. For example, to hash based on standard 5-tuple:
# sysctl -w net.ipv4.fib_multipath_hash_fields=0x0037
net.ipv4.fib_multipath_hash_fields = 0x0037
The kernel rejects unknown fields, for example:
# sysctl -w net.ipv4.fib_multipath_hash_fields=0x1000
sysctl: setting key "net.ipv4.fib_multipath_hash_fields": Invalid argument
More fields can be added in the future, if needed.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
A subsequent patch will add another multipath hash policy where the
multipath hash is calculated directly by the policy specific code and
not outside of the switch statement.
Prepare for this change by moving the multipath hash calculation inside
the switch statement.
No functional changes intended.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
'err' and 'flags' are not used, we can just get rid of them.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <song@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210517022348.50555-1-xiyou.wangcong@gmail.com
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding multiple break statements instead of just
letting the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Every protocol has the 'netns_ok' member and it is euqal to 1. The
'if (!prot->netns_ok)' always false in inet_add_protocol().
Signed-off-by: Yejune Deng <yejunedeng@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Treat only the highest, not the lowest, IPv4 address within a local
subnet as a broadcast address.
Signed-off-by: Seth David Schoen <schoen@loyalty.org>
Suggested-by: John Gilmore <gnu@toad.com>
Acked-by: Dave Taht <dave.taht@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a tracepoint for capturing TCP segments with
a bad checksum. This makes it easy to identify
sources of bad frames in the fleet (e.g. machines
with faulty NICs).
It should also help tools like IOvisor's tcpdrop.py
which are used today to get detailed information
about such packets.
We don't have a socket in many cases so we must
open code the address extraction based just on
the skb.
v2: add missing export for ipv6=m
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Making '!=' operation with 0 directly after calling
the function xfrm_parse_spi() is more efficient,
assignment to err is redundant.
Eliminate the following clang_analyzer warning:
net/ipv4/esp4_offload.c:41:7: warning: Although the value stored to
'err' is used in the enclosing expression, the value is never actually
read from 'err'
No functional change, only more efficient.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Daniel Borkmann says:
====================
pull-request: bpf 2021-05-11
The following pull-request contains BPF updates for your *net* tree.
We've added 13 non-merge commits during the last 8 day(s) which contain
a total of 21 files changed, 817 insertions(+), 382 deletions(-).
The main changes are:
1) Fix multiple ringbuf bugs in particular to prevent writable mmap of
read-only pages, from Andrii Nakryiko & Thadeu Lima de Souza Cascardo.
2) Fix verifier alu32 known-const subregister bound tracking for bitwise
operations and/or/xor, from Daniel Borkmann.
3) Reject trampoline attachment for functions with variable arguments,
and also add a deny list of other forbidden functions, from Jiri Olsa.
4) Fix nested bpf_bprintf_prepare() calls used by various helpers by
switching to per-CPU buffers, from Florent Revest.
5) Fix kernel compilation with BTF debug info on ppc64 due to pahole
missing TCP-CC functions like cubictcp_init, from Martin KaFai Lau.
6) Add a kconfig entry to provide an option to disallow unprivileged
BPF by default, from Daniel Borkmann.
7) Fix libbpf compilation for older libelf when GELF_ST_VISIBILITY()
macro is not available, from Arnaldo Carvalho de Melo.
8) Migrate test_tc_redirect to test_progs framework as prep work
for upcoming skb_change_head() fix & selftest, from Jussi Maki.
9) Fix a libbpf segfault in add_dummy_ksym_var() if BTF is not
present, from Ian Rogers.
10) Fix tx_only micro-benchmark in xdpsock BPF sample with proper frame
size, from Magnus Karlsson.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
During the discussion in [0]. It was pointed out that static functions
in ppc64 is prefixed with ".". For example, the 'readelf -s vmlinux.ppc':
89326: c000000001383280 24 NOTYPE LOCAL DEFAULT 31 cubictcp_init
89327: c000000000c97c50 168 FUNC LOCAL DEFAULT 2 .cubictcp_init
The one with FUNC type is ".cubictcp_init" instead of "cubictcp_init".
The "." seems to be done by arch/powerpc/include/asm/ppc_asm.h.
This caused that pahole cannot generate the BTF for these tcp-cc kernel
functions because pahole only captures the FUNC type and "cubictcp_init"
is not. It then failed the kernel compilation in ppc64.
This behavior is only reported in ppc64 so far. I tried arm64, s390,
and sparc64 and did not observe this "." prefix and NOTYPE behavior.
Since the kfunc call is only supported in the x86_64 and x86_32 JIT,
this patch limits those tcp-cc functions to x86 only to avoid unnecessary
compilation issue in other ARCHs. In the future, we can examine if it
is better to change all those functions from static to extern.
[0] https://lore.kernel.org/bpf/4e051459-8532-7b61-c815-f3435767f8a0@kernel.org/
Fixes: e78aea8b21 ("bpf: tcp: Put some tcp cong functions in allowlist for bpf-tcp-cc")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Michal Suchánek <msuchanek@suse.de>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/bpf/20210508005011.3863757-1-kafai@fb.com
When we call af_ops->set_link_af() we hold a RCU read lock
as we retrieve af_ops from the RCU protected list, but this
is unnecessary because we already hold RTNL lock, which is
the writer lock for protecting rtnl_af_ops, so it is safer
than RCU read lock. Similar for af_ops->validate_link_af().
This was not a problem until we begin to take mutex lock
down the path of ->set_link_af() in __ipv6_dev_mc_dec()
recently. We can just drop the RCU read lock there and
assert RTNL lock.
Reported-and-tested-by: syzbot+7d941e89dd48bcf42573@syzkaller.appspotmail.com
Fixes: 63ed8de4be ("mld: add mc_lock for protecting per-interface mld data")
Tested-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Add SECMARK revision 1 to fix incorrect layout that prevents
from remove rule with this target, from Phil Sutter.
2) Fix pernet exit path spat in arptables, from Florian Westphal.
3) Missing rcu_read_unlock() for unknown nfnetlink callbacks,
reported by syzbot, from Eric Dumazet.
4) Missing check for skb_header_pointer() NULL pointer in
nfnetlink_osf.
5) Remove BUG_ON() after skb_header_pointer() from packet path
in several conntrack helper and the TCP tracker.
6) Fix memleak in the new object error path of userdata.
7) Avoid overflows in nft_hash_buckets(), reported by syzbot,
also from Eric.
8) Avoid overflows in 32bit arches, from Eric.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
netfilter: nftables: avoid potential overflows on 32bit arches
netfilter: nftables: avoid overflows in nft_hash_buckets()
netfilter: nftables: Fix a memleak from userdata error path in new objects
netfilter: remove BUG_ON() after skb_header_pointer()
netfilter: nfnetlink_osf: Fix a missing skb_header_pointer() NULL check
netfilter: nfnetlink: add a missing rcu_read_unlock()
netfilter: arptables: use pernet ops struct during unregister
netfilter: xt_SECMARK: add new revision to fix structure layout
====================
Link: https://lore.kernel.org/r/20210507174739.1850-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A prior change (1f466e1f15) introduces separate handling for
->msg_control depending on whether the pointer is a kernel or user
pointer. However, while tcp receive zerocopy is using this field, it
is not properly annotating that the buffer in this case is a user
pointer. This can cause faults when the improper mechanism is used
within put_cmsg().
This patch simply annotates tcp receive zerocopy's use as explicitly
being a user pointer.
Fixes: 7eeba1706e ("tcp: Add receive timestamp support for receive zerocopy.")
Signed-off-by: Arjun Roy <arjunroy@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210506223530.2266456-1-arjunroy.kdev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_set_default_congestion_control() is netns-safe in that it writes
to &net->ipv4.tcp_congestion_control, but it also sets
ca->flags |= TCP_CONG_NON_RESTRICTED which is not namespaced.
This has the unintended side-effect of changing the global
net.ipv4.tcp_allowed_congestion_control sysctl, despite the fact that it
is read-only: 97684f0970 ("net: Make tcp_allowed_congestion_control
readonly in non-init netns")
Resolve this netns "leak" by only allowing the init netns to set the
default algorithm to one that is restricted. This restriction could be
removed if tcp_allowed_congestion_control were namespace-ified in the
future.
This bug was uncovered with
https://github.com/JonathonReinhart/linux-netns-sysctl-verify
Fixes: 6670e15244 ("tcp: Namespace-ify sysctl_tcp_default_congestion_control")
Signed-off-by: Jonathon Reinhart <jonathon.reinhart@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Like with iptables and ebtables, hook unregistration has to use the
pernet ops struct, not the template.
This triggered following splat:
hook not found, pf 3 num 0
WARNING: CPU: 0 PID: 224 at net/netfilter/core.c:480 __nf_unregister_net_hook+0x1eb/0x610 net/netfilter/core.c:480
[..]
nf_unregister_net_hook net/netfilter/core.c:502 [inline]
nf_unregister_net_hooks+0x117/0x160 net/netfilter/core.c:576
arpt_unregister_table_pre_exit+0x67/0x80 net/ipv4/netfilter/arp_tables.c:1565
Fixes: f9006acc8d ("netfilter: arp_tables: pass table pointer via nf_hook_ops")
Reported-by: syzbot+dcccba8a1e41a38cb9df@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The current definitions of constants for PROBE, currently defined only
in the net-next kernel branch, are inconsistent, with
some beginning with ICMP and others with simply EXT. This patch
attempts to standardize the naming conventions of the constants for
PROBE before their release into a stable Kernel, and to update the
relevant definitions in net/ipv4/icmp.c.
Similarly, the definitions for the code field (previously
ICMP_EXT_MAL_QUERY, etc) use the same prefixes as the type field. This
patch adds _CODE_ to the prefix to clarify the distinction of these
constants.
Signed-off-by: Andreas Roeseler <andreas.a.roeseler@gmail.com>
Acked-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20210427153635.2591-1-andreas.a.roeseler@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) The various ip(6)table_foo incarnations are updated to expect
that the table is passed as 'void *priv' argument that netfilter core
passes to the hook functions. This reduces the struct net size by 2
cachelines on x86_64. From Florian Westphal.
2) Add cgroupsv2 support for nftables.
3) Fix bridge log family merge into nf_log_syslog: Missing
unregistration from netns exit path, from Phil Sutter.
4) Add nft_pernet() helper to access nftables pernet area.
5) Add struct nfnl_info to reduce nfnetlink callback footprint and
to facilite future updates. Consolidate nfnetlink callbacks.
6) Add CONFIG_NETFILTER_XTABLES_COMPAT Kconfig knob, also from Florian.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The compat layer needs to parse untrusted input (the ruleset)
to translate it to a 64bit compatible format.
We had a number of bugs in this department in the past, so allow users
to turn this feature off.
Add CONFIG_NETFILTER_XTABLES_COMPAT kconfig knob and make it default to y
to keep existing behaviour.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Same change as previous patch. Only difference:
no need to handle NULL template_ops parameter, the only caller
(arptable_filter) always passes non-NULL argument.
This removes all remaining accesses to net->ipv4.arptable_filter.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
iptable_x modules rely on 'struct net' to contain a pointer to the
table that should be evaluated.
In order to remove these pointers from struct net, pass them via
the 'priv' pointer in a similar fashion as nf_tables passes the
rule data.
To do that, duplicate the nf_hook_info array passed in from the
iptable_x modules, update the ops->priv pointers of the copy to
refer to the table and then change the hookfn implementations to
just pass the 'priv' argument to the traverser.
After this patch, the xt_table pointers can already be removed
from struct net.
However, changes to struct net result in re-compile of the entire
network stack, so do the removal after arptables and ip6tables
have been converted as well.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This changes how ip(6)table nat passes the ruleset/table to the
evaluation loop.
At the moment, it will fetch the table from struct net.
This change stores the table in the hook_ops 'priv' argument
instead.
This requires to duplicate the hook_ops for each netns, so
they can store the (per-net) xt_table structure.
The dupliated nat hook_ops get stored in net_generic data area.
They are free'd in the namespace exit path.
This is a pre-requisite to remove the xt_table/ruleset pointers
from struct net.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
No need for these.
There is only one caller, the xtables core, when the table is registered
for the first time with a particular network namespace.
After ->table_init() call, the table is linked into the tables[af] list,
so next call to that function will skip the ->table_init().
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
xtables stores the xt_table structs in the struct net. This isn't
needed anymore, the structures could be passed via the netfilter hook
'private' pointer to the hook functions, which would allow us to remove
those pointers from struct net.
As a first step, reduce the number of accesses to the
net->ipv4.ip6table_{raw,filter,...} pointers.
This allows the tables to get unregistered by name instead of having to
pass the raw address.
The xt_table structure cane looked up by name+address family instead.
This patch is useless as-is (the backends still have the raw pointer
address), but it lowers the bar to remove those.
It also allows to put the 'was table registered in the first place' check
into ip_tables.c rather than have it in each table sub module.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Its the same function as ipt_unregister_table_exit.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When I changed defrag hooks to no longer get registered by default I
intentionally made it so that registration can only be un-done by unloading
the nf_defrag_ipv4/6 module.
In hindsight this was too conservative; there is no reason to keep defrag
on while there is no feature dependency anymore.
Moreover, this won't work if user isn't allowed to remove nf_defrag module.
This adds the disable() functions for both ipv4 and ipv6 and calls them
from conntrack, TPROXY and the xtables socket module.
ipvs isn't converted here, it will behave as before this patch and
will need module removal.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-04-23
The following pull-request contains BPF updates for your *net-next* tree.
We've added 69 non-merge commits during the last 22 day(s) which contain
a total of 69 files changed, 3141 insertions(+), 866 deletions(-).
The main changes are:
1) Add BPF static linker support for extern resolution of global, from Andrii.
2) Refine retval for bpf_get_task_stack helper, from Dave.
3) Add a bpf_snprintf helper, from Florent.
4) A bunch of miscellaneous improvements from many developers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Add vlan match and pop actions to the flowtable offload,
patches from wenxu.
2) Reduce size of the netns_ct structure, which itself is
embedded in struct net Make netns_ct a read-mostly structure.
Patches from Florian Westphal.
3) Add FLOW_OFFLOAD_XMIT_UNSPEC to skip dst check from garbage
collector path, as required by the tc CT action. From Roi Dayan.
4) VLAN offload fixes for nftables: Allow for matching on both s-vlan
and c-vlan selectors. Fix match of VLAN id due to incorrect
byteorder. Add a new routine to properly populate flow dissector
ethertypes.
5) Missing keys in ip{6}_route_me_harder() results in incorrect
routes. This includes an update for selftest infra. Patches
from Ido Schimmel.
6) Add counter hardware offload support through FLOW_CLS_STATS.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, a multi-part nexthop dump is restarted based on the number of
nexthops that have been dumped so far. This can result in a lot of
nexthops not being dumped when nexthops are simultaneously deleted:
# ip nexthop | wc -l
65536
# ip nexthop flush
Dump was interrupted and may be inconsistent.
Flushed 36040 nexthops
# ip nexthop | wc -l
29496
Instead, restart the dump based on the nexthop identifier (fixed number)
of the last successfully dumped nexthop:
# ip nexthop | wc -l
65536
# ip nexthop flush
Dump was interrupted and may be inconsistent.
Flushed 65536 nexthops
# ip nexthop | wc -l
0
Reported-by: Maksym Yaremchuk <maksymy@nvidia.com>
Tested-by: Maksym Yaremchuk <maksymy@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jianwen reported that IPv6 Interoperability tests are failing in an
IPsec case where one of the links between the IPsec peers has an MTU
of 1280. The peer generates a packet larger than this MTU, the router
replies with a "Packet too big" message indicating an MTU of 1280.
When the peer tries to send another large packet, xfrm_state_mtu
returns 1280 - ipsec_overhead, which causes ip6_setup_cork to fail
with EINVAL.
We can fix this by forcing xfrm_state_mtu to return IPV6_MIN_MTU when
IPv6 is used. After going through IPsec, the packet will then be
fragmented to obey the actual network's PMTU, just before leaving the
host.
Currently, TFC padding is capped to PMTU - overhead to avoid
fragementation: after padding and encapsulation, we still fit within
the PMTU. That behavior is preserved in this patch.
Fixes: 91657eafb6 ("xfrm: take net hdr len into account for esp payload size calculation")
Reported-by: Jianwen Ji <jiji@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Netfilter tries to reroute mangled packets as a different route might
need to be used following the mangling. When this happens, netfilter
does not populate the IP protocol, the source port and the destination
port in the flow key. Therefore, FIB rules that match on these fields
are ignored and packets can be misrouted.
Solve this by dissecting the outer flow and populating the flow key
before rerouting the packet. Note that flow dissection only happens when
FIB rules that match on these fields are installed, so in the common
case there should not be a penalty.
Reported-by: Michal Soltys <msoltyspl@yandex.pl>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
- keep the ZC code, drop the code related to reinit
net/bridge/netfilter/ebtables.c
- fix build after move to net_generic
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2021-04-14
Not much this time:
1) Simplification of some variable calculations in esp4 and esp6.
From Jiapeng Chong and Junlin Yang.
2) Fix a clang Wformat warning in esp6 and ah6.
From Arnd Bergmann.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, tcp_allowed_congestion_control is global and writable;
writing to it in any net namespace will leak into all other net
namespaces.
tcp_available_congestion_control and tcp_allowed_congestion_control are
the only sysctls in ipv4_net_table (the per-netns sysctl table) with a
NULL data pointer; their handlers (proc_tcp_available_congestion_control
and proc_allowed_congestion_control) have no other way of referencing a
struct net. Thus, they operate globally.
Because ipv4_net_table does not use designated initializers, there is no
easy way to fix up this one "bad" table entry. However, the data pointer
updating logic shouldn't be applied to NULL pointers anyway, so we
instead force these entries to be read-only.
These sysctls used to exist in ipv4_table (init-net only), but they were
moved to the per-net ipv4_net_table, presumably without realizing that
tcp_allowed_congestion_control was writable and thus introduced a leak.
Because the intent of that commit was only to know (i.e. read) "which
congestion algorithms are available or allowed", this read-only solution
should be sufficient.
The logic added in recent commit
31c4d2f160eb: ("net: Ensure net namespace isolation of sysctls")
does not and cannot check for NULL data pointers, because
other table entries (e.g. /proc/sys/net/netfilter/nf_log/) have
.data=NULL but use other methods (.extra2) to access the struct net.
Fixes: 9cb8e048e5 ("net/ipv4/sysctl: show tcp_{allowed, available}_congestion_control in non-initial netns")
Signed-off-by: Jonathon Reinhart <jonathon.reinhart@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current icmp_rcv function drops all unknown ICMP types, including
ICMP_EXT_ECHOREPLY (type 43). In order to parse Extended Echo Reply messages, we have
to pass these packets to the ping_rcv function, which does not do any
other filtering and passes the packet to the designated socket.
Pass incoming RFC 8335 ICMP Extended Echo Reply packets to the ping_rcv
handler instead of discarding the packet.
Signed-off-by: Andreas Roeseler <andreas.a.roeseler@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix NAT IPv6 offload in the flowtable.
2) icmpv6 is printed as unknown in /proc/net/nf_conntrack.
3) Use div64_u64() in nft_limit, from Eric Dumazet.
4) Use pre_exit to unregister ebtables and arptables hooks,
from Florian Westphal.
5) Fix out-of-bound memset in x_tables compat match/target,
also from Florian.
6) Clone set elements expression to ensure proper initialization.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
xt_compat_match/target_from_user doesn't check that zeroing the area
to start of next rule won't write past end of allocated ruleset blob.
Remove this code and zero the entire blob beforehand.
Reported-by: syzbot+cfc0247ac173f597aaaa@syzkaller.appspotmail.com
Reported-by: Andy Nguyen <theflow@google.com>
Fixes: 9fa492cdc1 ("[NETFILTER]: x_tables: simplify compat API")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Same problem that also existed in iptables/ip(6)tables, when
arptable_filter is removed there is no longer a wait period before the
table/ruleset is free'd.
Unregister the hook in pre_exit, then remove the table in the exit
function.
This used to work correctly because the old nf_hook_unregister API
did unconditional synchronize_net.
The per-net hook unregister function uses call_rcu instead.
Fixes: b9e69e1273 ("netfilter: xtables: don't hook tables by default")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Conflicts:
MAINTAINERS
- keep Chandrasekar
drivers/net/ethernet/mellanox/mlx5/core/en_main.c
- simple fix + trust the code re-added to param.c in -next is fine
include/linux/bpf.h
- trivial
include/linux/ethtool.h
- trivial, fix kdoc while at it
include/linux/skmsg.h
- move to relevant place in tcp.c, comment re-wrapped
net/core/skmsg.c
- add the sk = sk // sk = NULL around calls
net/tipc/crypto.c
- trivial
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Setting iftoken can fail for several different reasons but there
and there was no report to user as to the cause. Add netlink
extended errors to the processing of the request.
This requires adding additional argument through rtnl_af_ops
set_link_af callback.
Reported-by: Hongren Zheng <li@zenithal.me>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following batch contains Netfilter/IPVS updates for your net-next tree:
1) Simplify log infrastructure modularity: Merge ipv4, ipv6, bridge,
netdev and ARP families to nf_log_syslog.c. Add module softdeps.
This fixes a rare deadlock condition that might occur when log
module autoload is required. From Florian Westphal.
2) Moves part of netfilter related pernet data from struct net to
net_generic() infrastructure. All of these users can be modules,
so if they are not loaded there is no need to waste space. Size
reduction is 7 cachelines on x86_64, also from Florian.
2) Update nftables audit support to report events once per table,
to get it aligned with iptables. From Richard Guy Briggs.
3) Check for stale routes from the flowtable garbage collector path.
This is fixing IPv6 which breaks due missing check for the dst_cookie.
4) Add a nfnl_fill_hdr() function to simplify netlink + nfnetlink
headers setup.
5) Remove documentation on several statified functions.
6) Remove printk on netns creation for the FTP IPVS tracker,
from Florian Westphal.
7) Remove unnecessary nf_tables_destroy_list_lock spinlock
initialization, from Yang Yingliang.
7) Remove a duplicated forward declaration in ipset,
from Wan Jiabing.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Userspace sends tcp connection (sock) destroy on network switch
i.e switching the default network of the device between multiple
networks(Cellular/Wifi/Ethernet).
Kernel though doesn't send reset for the connections in SYN-SENT state
and these connections continue to remain.
Even as per RFC 793, there is no hard rule to not send RST on ABORT in
this state.
Modify tcp_abort and tcp_disconnect behavior to send RST for connections
in syn-sent state to avoid lingering connections on network switch.
Signed-off-by: Manoj Basapathi <manojbm@codeaurora.org>
Signed-off-by: Sauvik Saha <ssaha@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
These comments in udp_bpf_update_proto() are copied from the
original TCP code and apparently do not apply to UDP. Just
remove them.
Reported-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210403052715.13854-1-xiyou.wangcong@gmail.com
This allows followup patch to remove the defrag_ipv4 member from struct
net. It also allows to auto-remove the hooks later on by adding a
_disable() function. This will be done later in a follow patch series.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The MPTCP reset option allows to carry a mptcp-specific error code that
provides more information on the nature of a connection reset.
Reset option data received gets stored in the subflow context so it can
be sent to userspace via the 'subflow closed' netlink event.
When a subflow is closed, the desired error code that should be sent to
the peer is also placed in the subflow context structure.
If a reset is sent before subflow establishment could complete, e.g. on
HMAC failure during an MP_JOIN operation, the mptcp skb extension is
used to store the reset information.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-04-01
The following pull-request contains BPF updates for your *net-next* tree.
We've added 68 non-merge commits during the last 7 day(s) which contain
a total of 70 files changed, 2944 insertions(+), 1139 deletions(-).
The main changes are:
1) UDP support for sockmap, from Cong.
2) Verifier merge conflict resolution fix, from Daniel.
3) xsk selftests enhancements, from Maciej.
4) Unstable helpers aka kernel func calling, from Martin.
5) Batches ops for LPM map, from Pedro.
6) Fix race in bpf_get_local_storage, from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Support for UDP_GRO was added in the past but the implementation for
getsockopt was missed which did lead to an error when we tried to
retrieve the setting for UDP_GRO. This patch adds the missing switch
case for UDP_GRO
Fixes: e20cf8d3f1 ("udp: implement GRO for plain UDP sockets.")
Signed-off-by: Norman Maurer <norman_maurer@apple.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We have to implement udp_bpf_recvmsg() to replace the ->recvmsg()
to retrieve skmsg from ingress_msg.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210331023237.41094-14-xiyou.wangcong@gmail.com
Although these two functions are only used by TCP, they are not
specific to TCP at all, both operate on skmsg and ingress_msg,
so fit in net/core/skmsg.c very well.
And we will need them for non-TCP, so rename and move them to
skmsg.c and export them to modules.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210331023237.41094-13-xiyou.wangcong@gmail.com
This is similar to tcp_read_sock(), except we do not need
to worry about connections, we just need to retrieve skb
from UDP receive queue.
Note, the return value of ->read_sock() is unused in
sk_psock_verdict_data_ready(), and UDP still does not
support splice() due to lack of ->splice_read(), so users
can not reach udp_read_sock() directly.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210331023237.41094-12-xiyou.wangcong@gmail.com
Currently sockmap calls into each protocol to update the struct
proto and replace it. This certainly won't work when the protocol
is implemented as a module, for example, AF_UNIX.
Introduce a new ops sk->sk_prot->psock_update_sk_prot(), so each
protocol can implement its own way to replace the struct proto.
This also helps get rid of symbol dependencies on CONFIG_INET.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210331023237.41094-11-xiyou.wangcong@gmail.com
Currently we rely on lock_sock to protect ingress_msg,
it is too big for this, we can actually just use a spinlock
to protect this list like protecting other skb queues.
__tcp_bpf_recvmsg() is still special because of peeking,
it still has to use lock_sock.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210331023237.41094-3-xiyou.wangcong@gmail.com
Steffen Klassert says:
====================
pull request (net): ipsec 2021-03-31
1) Fix ipv4 pmtu checks for xfrm anf vti interfaces.
From Eyal Birger.
2) There are situations where the socket passed to
xfrm_output_resume() is not the same as the one
attached to the skb. Use the socket passed to
xfrm_output_resume() to avoid lookup failures
when xfrm is used with VRFs.
From Evan Nimmo.
3) Make the xfrm_state_hash_generation sequence counter per
network namespace because but its write serialization
lock is also per network namespace. Write protection
is insufficient otherwise.
From Ahmed S. Darwish.
4) Fixup sctp featue flags when used with esp offload.
From Xin Long.
5) xfrm BEET mode doesn't support fragments for inner packets.
This is a limitation of the protocol, so no fix possible.
Warn at least to notify the user about that situation.
From Xin Long.
6) Fix NULL pointer dereference on policy lookup when
namespaces are uses in combination with esp offload.
7) Fix incorrect transformation on esp offload when
packets get segmented at layer 3.
8) Fix some user triggered usages of WARN_ONCE in
the xfrm compat layer.
From Dmitry Safonov.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
sysctl_icmp_echo_enable_probe is an u8.
ipv4_net_table entry should use
.maxlen = sizeof(u8).
.proc_handler = proc_dou8vec_minmax,
Fixes: f1b8fa9fa5 ("net: add sysctl for enabling RFC 8335 PROBE messages")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Andreas Roeseler <andreas.a.roeseler@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the UDP protocol delivers GSO_FRAGLIST packets to
the sockets without the expected segmentation.
This change addresses the issue introducing and maintaining
a couple of new fields to explicitly accept SKB_GSO_UDP_L4
or GSO_FRAGLIST packets. Additionally updates udp_unexpected_gso()
accordingly.
UDP sockets enabling UDP_GRO stil keep accept_udp_fraglist
zeroed.
v1 -> v2:
- use 2 bits instead of a whole GSO bitmask (Willem)
Fixes: 9fd1ff5d2a ("udp: Support UDP fraglist GRO/GSO.")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After the previous patch, the stack can do L4 UDP aggregation
on top of a UDP tunnel.
In such scenario, udp{4,6}_gro_complete will be called twice. This function
will enter its is_flist branch immediately, even though that is only
correct on the second call, as GSO_FRAGLIST is only relevant for the
inner packet.
Instead, we need to try first UDP tunnel-based aggregation, if the GRO
packet requires that.
This patch changes udp{4,6}_gro_complete to skip the frag list processing
when while encap_mark == 1, identifying processing of the outer tunnel
header.
Additionally, clears the field in udp_gro_complete() so that we can enter
the frag list path on the next round, for the inner header.
v1 -> v2:
- hopefully clarified the commit message
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If NETIF_F_GRO_FRAGLIST or NETIF_F_GRO_UDP_FWD are enabled, and there
are UDP tunnels available in the system, udp_gro_receive() could end-up
doing L4 aggregation (either SKB_GSO_UDP_L4 or SKB_GSO_FRAGLIST) at
the outer UDP tunnel level for packets effectively carrying and UDP
tunnel header.
That could cause inner protocol corruption. If e.g. the relevant
packets carry a vxlan header, different vxlan ids will be ignored/
aggregated to the same GSO packet. Inner headers will be ignored, too,
so that e.g. TCP over vxlan push packets will be held in the GRO
engine till the next flush, etc.
Just skip the SKB_GSO_UDP_L4 and SKB_GSO_FRAGLIST code path if the
current packet could land in a UDP tunnel, and let udp_gro_receive()
do GRO via udp_sk(sk)->gro_receive.
The check implemented in this patch is broader than what is strictly
needed, as the existing UDP tunnel could be e.g. configured on top of
a different device: we could end-up skipping GRO at-all for some packets.
Anyhow, that is a very thin corner case and covering it will add quite
a bit of complexity.
v1 -> v2:
- hopefully clarify the commit message
Fixes: 9fd1ff5d2a ("udp: Support UDP fraglist GRO/GSO.")
Fixes: 36707061d6 ("udp: allow forwarding of plain (non-fraglisted) UDP GRO packets")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When UDP packets generated locally by a socket with UDP_SEGMENT
traverse the following path:
UDP tunnel(xmit) -> veth (segmentation) -> veth (gro) ->
UDP tunnel (rx) -> UDP socket (no UDP_GRO)
ip_summed will be set to CHECKSUM_PARTIAL at creation time and
such checksum mode will be preserved in the above path up to the
UDP tunnel receive code where we have:
__iptunnel_pull_header() -> skb_pull_rcsum() ->
skb_postpull_rcsum() -> __skb_postpull_rcsum()
The latter will convert the skb to CHECKSUM_NONE.
The UDP GSO packet will be later segmented as part of the rx socket
receive operation, and will present a CHECKSUM_NONE after segmentation.
Additionally the segmented packets UDP CB still refers to the original
GSO packet len. Overall that causes unexpected/wrong csum validation
errors later in the UDP receive path.
We could possibly address the issue with some additional checks and
csum mangling in the UDP tunnel code. Since the issue affects only
this UDP receive slow path, let's set a suitable csum status there.
Note that SKB_GSO_UDP_L4 or SKB_GSO_FRAGLIST packets lacking an UDP
encapsulation present a valid checksum when landing to udp_queue_rcv_skb(),
as the UDP checksum has been validated by the GRO engine.
v2 -> v3:
- even more verbose commit message and comments
v1 -> v2:
- restrict the csum update to the packets strictly needing them
- hopefully clarify the commit message and code comments
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
similar to previous change: nf_log_syslog now covers ARP logging
as well, the old nf_log_arp module is removed.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Netfilter has multiple log modules:
nf_log_arp
nf_log_bridge
nf_log_ipv4
nf_log_ipv6
nf_log_netdev
nfnetlink_log
nf_log_common
With the exception of nfnetlink_log (packet is sent to userspace for
dissection/logging), all of them log to the kernel ringbuffer.
This is the first part of a series to merge all modules except
nfnetlink_log into a single module: nf_log_syslog.
This allows to reduce code. After the series, only two log modules remain:
nfnetlink_log and nf_log_syslog. The latter provides the same
functionality as the old per-af log modules.
This renames nf_log_ipv4 to nf_log_syslog.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Modify the icmp_rcv function to check PROBE messages and call icmp_echo
if a PROBE request is detected.
Modify the existing icmp_echo function to respond ot both ping and PROBE
requests.
This was tested using a custom modification to the iputils package and
wireshark. It supports IPV4 probing by name, ifindex, and probing by
both IPV4 and IPV6 addresses. It currently does not support responding
to probes off the proxy node (see RFC 8335 Section 2).
The modification to the iputils package is still in development and can
be found here: https://github.com/Juniper-Clinic-2020/iputils.git. It
supports full sending functionality of PROBE requests, but currently
does not parse the response messages, which is why Wireshark is required
to verify the sent and recieved PROBE messages. The modification adds
the ``-e'' flag to the command which allows the user to specify the
interface identifier to query the probed host. An example usage would be
<./ping -4 -e 1 [destination]> to send a PROBE request of ifindex 1 to the
destination node.
Signed-off-by: Andreas Roeseler <andreas.a.roeseler@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Modify the ping_supported function to support PROBE message types. This
allows tools such as the ping command in the iputils package to be
modified to send PROBE requests through the existing framework for
sending ping requests.
Signed-off-by: Andreas Roeseler <andreas.a.roeseler@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Section 8 of RFC 8335 specifies potential security concerns of
responding to PROBE requests, and states that nodes that support PROBE
functionality MUST be able to enable/disable responses and that
responses MUST be disabled by default
Signed-off-by: Andreas Roeseler <andreas.a.roeseler@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
pahole currently only generates the btf_id for external function and
ftrace-able function. Some functions in the bpf_tcp_ca_kfunc_ids
are static (e.g. cubictcp_init). Thus, unless CONFIG_DYNAMIC_FTRACE
is set, btf_ids for those functions will not be generated and the
compilation fails during resolve_btfids.
This patch limits those functions to CONFIG_DYNAMIC_FTRACE. I will
address the pahole generation in a followup and then remove the
CONFIG_DYNAMIC_FTRACE limitation.
Fixes: e78aea8b21 ("bpf: tcp: Put some tcp cong functions in allowlist for bpf-tcp-cc")
Reported-by: Cong Wang <xiyou.wangcong@gmail.com>
Reported-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210329221357.834438-1-kafai@fb.com
tcp_min_tso_segs is now stored in u8, so max value is 255.
255 limit is enforced by proc_dou8vec_minmax().
We can therefore remove the gso_max_segs variable.
Fixes: 47996b489bdc ("tcp: convert elligible sysctls to u8")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 94579ac3f6 ("xfrm: Fix double ESP trailer insertion in IPsec
crypto offload.") added a XFRM_XMIT flag to avoid duplicate ESP trailer
insertion on HW offload. This flag is set on the secpath that is shared
amongst segments. This lead to a situation where some segments are
not transformed correctly when segmentation happens at layer 3.
Fix this by using private skb extensions for segmented and hw offloaded
ESP packets.
Fixes: 94579ac3f6 ("xfrm: Fix double ESP trailer insertion in IPsec crypto offload.")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
There is a typo in the bbr function, s/even/event/.
This patch fixes it.
Fixes: e78aea8b21 ("bpf: tcp: Put some tcp cong functions in allowlist for bpf-tcp-cc")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210329003213.2274210-1-kafai@fb.com
After resilient next-hop groups have been added recently, there are two
types of multipath next-hop groups: the legacy "mpath", and the new
"resilient". Calling the legacy next-hop group type "mpath" is unfortunate,
because that describes the fact that a packet could be forwarded in one of
several paths, which is also true for the resilient next-hop groups.
Therefore, to make the naming clearer, rename various artifacts to reflect
the assumptions made. Therefore as of this patch:
- The flag for multipath groups is nh_grp_entry::is_multipath. This
includes the legacy and resilient groups, as well as any future group
types that behave as multipath groups.
Functions that assume this have "mpath" in the name.
- The flag for legacy multipath groups is nh_grp_entry::hash_threshold.
Functions that assume this have "hthr" in the name.
- The flag for resilient groups is nh_grp_entry::resilient.
Functions that assume this have "res" in the name.
Besides the above, struct nh_grp_entry::mpath was renamed to ::hthr as
well.
UAPI artifacts were obviously left intact.
Suggested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
s/readibility/readability/
s/insufficent/insufficient/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, building the bpf-next source with the CONFIG_BPF_SYSCALL
enabled is causing a compilation error:
"net/ipv4/bpf_tcp_ca.c:209:28: error: expected identifier or '(' before
',' token"
Fix this by removing an unnecessary comma.
Fixes: e78aea8b21 ("bpf: tcp: Put some tcp cong functions in allowlist for bpf-tcp-cc")
Reported-by: syzbot+0b74d8ec3bf0cc4e4209@syzkaller.appspotmail.com
Signed-off-by: Atul Gopinathan <atulgopinathan@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210328120515.113895-1-atulgopinathan@gmail.com
This patch puts some tcp cong helper functions, tcp_slow_start()
and tcp_cong_avoid_ai(), into the allowlist for the bpf-tcp-cc
program.
A few tcp cc implementation functions are also put into the
allowlist. A potential use case is the bpf-tcp-cc implementation
may only want to override a subset of a tcp_congestion_ops. For others,
the bpf-tcp-cc can directly call the kernel counter parts instead of
re-implementing (or copy-and-pasting) them to the bpf program.
They will only be available to the bpf-tcp-cc typed program.
The allowlist functions are not bounded to a fixed ABI contract.
When any of them has changed, the bpf-tcp-cc program has to be changed
like any in-tree/out-of-tree kernel tcp-cc implementations do also.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210325015201.1546345-1-kafai@fb.com
The cubic functions in tcp_cubic.c are using the bictcp prefix as
in tcp_bic.c. This patch gives it the proper name cubictcp
because the later patch will allow the bpf prog to directly
call the cubictcp implementation. Renaming them will avoid
the name collision when trying to find the intended
one to call during bpf prog load time.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210325015155.1545532-1-kafai@fb.com
Many tcp sysctls are either bools or small ints that can fit into u8.
Reducing space taken by sysctls can save few cache line misses
when sending/receiving data while cpu caches are empty,
for example after cpu idle period.
This is hard to measure with typical network performance tests,
but after this patch, struct netns_ipv4 has shrunk
by three cache lines.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For these sysctls, their dedicated helpers have
to use proc_dou8vec_minmax().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This sysctl uses ip_fwd_update_priority() helper,
so the conversion needs to change it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These sysctls that can fit in one byte instead of one int
are converted to save space and thus reduce cache line misses.
- icmp_echo_ignore_all, icmp_echo_ignore_broadcasts,
- icmp_ignore_bogus_error_responses, icmp_errors_use_inbound_ifaddr
- tcp_ecn, tcp_ecn_fallback
- ip_default_ttl, ip_no_pmtu_disc, ip_fwd_use_pmtu
- ip_nonlocal_bind, ip_autobind_reuse
- ip_dynaddr, ip_early_demux, raw_l3mdev_accept
- nexthop_compat_mode, fwmark_reflect
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Modify "accomodate" to "accommodate" in net/ipv4/esp4.c.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Lu Wei <luwei32@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-03-24
The following pull-request contains BPF updates for your *net-next* tree.
We've added 37 non-merge commits during the last 15 day(s) which contain
a total of 65 files changed, 3200 insertions(+), 738 deletions(-).
The main changes are:
1) Static linking of multiple BPF ELF files, from Andrii.
2) Move drop error path to devmap for XDP_REDIRECT, from Lorenzo.
3) Spelling fixes from various folks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit 73f156a6e8 ("inetpeer: get rid of ip_id_count")
I used a very small hash table that could be abused
by patient attackers to reveal sensitive information.
Switch to a dynamic sizing, depending on RAM size.
Typical big hosts will now use 128x more storage (2 MB)
to get a similar increase in security and reduction
of hash collisions.
As a bonus, use of alloc_large_system_hash() spreads
allocated memory among all NUMA nodes.
Fixes: 73f156a6e8 ("inetpeer: get rid of ip_id_count")
Reported-by: Amit Klein <aksecurity@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
ic_close_dev contains a generalization of the logic to not close a
network interface if it's the host port for a DSA switch. This logic is
disguised behind an iteration through the lowers of ic_dev in
ic_close_dev.
When no interface for ipconfig can be found, ic_dev is NULL, and
ic_close_dev:
- dereferences a NULL pointer when assigning selected_dev
- would attempt to search through the lower interfaces of a NULL
net_device pointer
So we should protect against that case.
The "lower_dev" iterator variable was shortened to "lower" in order to
keep the 80 character limit.
Fixes: f68cbaed67 ("net: ipconfig: avoid use-after-free in ic_close_devs")
Fixes: 46acf7bdbc ("Revert "net: ipv4: handle DSA enabled master network devices"")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now in esp4/6_gso_segment(), before calling inner proto .gso_segment,
NETIF_F_CSUM_MASK bits are deleted, as HW won't be able to do the
csum for inner proto due to the packet encrypted already.
So the UDP/TCP packet has to do the checksum on its own .gso_segment.
But SCTP is using CRC checksum, and for that NETIF_F_SCTP_CRC should
be deleted to make SCTP do the csum in own .gso_segment as well.
In Xiumei's testing with SCTP over IPsec/veth, the packets are kept
dropping due to the wrong CRC checksum.
Reported-by: Xiumei Mu <xmu@redhat.com>
Fixes: 7862b4058b ("esp: Add gso handlers for esp4 and esp6")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Several patches to testore use of memory barriers instead of RCU to
ensure consistent access to ruleset, from Mark Tomlinson.
2) Fix dump of expectation via ctnetlink, from Florian Westphal.
3) GRE helper works for IPv6, from Ludovic Senecaux.
4) Set error on unsupported flowtable flags.
5) Use delayed instead of deferrable workqueue in the flowtable,
from Yinjun Zhang.
6) Fix spurious EEXIST in case of add-after-delete flowtable in
the same batch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The selftest failed to compile with clang-built bpf-next.
Adding LLVM=1 to your vmlinux and selftest build will use clang.
The error message is:
progs/test_sk_storage_tracing.c:38:18: error: use of undeclared identifier 'BPF_TCP_CLOSE'
if (newstate == BPF_TCP_CLOSE)
^
1 error generated.
make: *** [Makefile:423: /bpf-next/tools/testing/selftests/bpf/test_sk_storage_tracing.o] Error 1
The reason for the failure is that BPF_TCP_CLOSE, a value of
an anonymous enum defined in uapi bpf.h, is not defined in
vmlinux.h. gcc does not have this problem. Since vmlinux.h
is derived from BTF which is derived from vmlinux DWARF,
that means gcc-produced vmlinux DWARF has BPF_TCP_CLOSE
while llvm-produced vmlinux DWARF does not have.
BPF_TCP_CLOSE is referenced in net/ipv4/tcp.c as
BUILD_BUG_ON((int)BPF_TCP_CLOSE != (int)TCP_CLOSE);
The following test mimics the above BUILD_BUG_ON, preprocessed
with clang compiler, and shows gcc DWARF contains BPF_TCP_CLOSE while
llvm DWARF does not.
$ cat t.c
enum {
BPF_TCP_ESTABLISHED = 1,
BPF_TCP_CLOSE = 7,
};
enum {
TCP_ESTABLISHED = 1,
TCP_CLOSE = 7,
};
int test() {
do {
extern void __compiletime_assert_767(void) ;
if ((int)BPF_TCP_CLOSE != (int)TCP_CLOSE) __compiletime_assert_767();
} while (0);
return 0;
}
$ clang t.c -O2 -c -g && llvm-dwarfdump t.o | grep BPF_TCP_CLOSE
$ gcc t.c -O2 -c -g && llvm-dwarfdump t.o | grep BPF_TCP_CLOSE
DW_AT_name ("BPF_TCP_CLOSE")
Further checking clang code find clang actually tried to
evaluate condition at compile time. If it is definitely
true/false, it will perform optimization and the whole if condition
will be removed before generating IR/debuginfo.
This patch explicited add an expression after the
above mentioned BUILD_BUG_ON in net/ipv4/tcp.c like
(void)BPF_TCP_ESTABLISHED
to enable generation of debuginfo for the anonymous
enum which also includes BPF_TCP_CLOSE.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210317174132.589276-1-yhs@fb.com
proc_creat_seq() that directly take a struct seq_operations,
and deal with network namespaces in ->open.
Signed-off-by: Yejune Deng <yejune.deng@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently tcp_check_req can be called with obsolete req socket for which big
socket have been already created (because of CPU race or early demux
assigning req socket to multiple packets in gro batch).
Commit e0f9759f53 ("tcp: try to keep packet if SYN_RCV race
is lost") added retry in case when tcp_check_req is called for PSH|ACK packet.
But if client sends RST+ACK immediatly after connection being
established (it is performing healthcheck, for example) retry does not
occur. In that case tcp_check_req tries to close req socket,
leaving big socket active.
Fixes: e0f9759f53 ("tcp: try to keep packet if SYN_RCV race is lost")
Signed-off-by: Alexander Ovechkin <ovov@yandex-team.ru>
Reported-by: Oleg Senin <olegsenin@yandex-team.ru>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit cc00bcaa58.
This (and the preceding) patch basically re-implemented the RCU
mechanisms of patch 784544739a. That patch was replaced because of the
performance problems that it created when replacing tables. Now, we have
the same issue: the call to synchronize_rcu() makes replacing tables
slower by as much as an order of magnitude.
Prior to using RCU a script calling "iptables" approx. 200 times was
taking 1.16s. With RCU this increased to 11.59s.
Revert these patches and fix the issue in a different way.
Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This reverts commit 443d6e86f8.
This (and the following) patch basically re-implemented the RCU
mechanisms of patch 784544739a. That patch was replaced because of the
performance problems that it created when replacing tables. Now, we have
the same issue: the call to synchronize_rcu() makes replacing tables
slower by as much as an order of magnitude.
Revert these patches and fix the issue in a different way.
Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
All comment lines inside the comment block have been aligned.
Every line of comment starts with a * (uniformity in code).
Signed-off-by: Shubhankar Kuranagatti <shubhankarvk@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the following coccicheck warnings:
./net/ipv4/esp4.c:757:16-18: WARNING !A || A && B is equivalent to !A || B.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
TSQ provides a nice way to avoid bufferbloat on individual socket,
including retransmit packets. We can get rid of the old
heuristic:
/* Do not sent more than we queued. 1/4 is reserved for possible
* copying overhead: fragmentation, tunneling, mangling etc.
*/
if (refcount_read(&sk->sk_wmem_alloc) >
min_t(u32, sk->sk_wmem_queued + (sk->sk_wmem_queued >> 2),
sk->sk_sndbuf))
return -EAGAIN;
This heuristic was giving false positives according to Jakub,
whenever TX completions are delayed above RTT. (Ack packets
are processed by TCP stack before clones are orphaned/freed)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Jakub Kicinski <kuba@kernel.org>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub reported Data included in a Fastopen SYN that had to be
retransmit would have to wait for an RTO if TX completions are slow,
even with prior fix.
This is because tcp_rcv_fastopen_synack() does not use standard
rtx logic, meaning TSQ handler exits early in tcp_tsq_write()
because tp->lost_out == tp->retrans_out
Lets make tcp_rcv_fastopen_synack() use standard rtx logic,
by using tcp_mark_skb_lost() on the skb thats needs to be
sent again.
Not this raised a warning in tcp_fastretrans_alert() during my tests
since we consider the data not being aknowledged
by the receiver does not mean packet was lost on the network.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Jakub Kicinski <kuba@kernel.org>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub and Neil reported an increase of RTO timers whenever
TX completions are delayed a bit more (by increasing
NIC TX coalescing parameters)
Main issue is that TCP stack has a logic preventing a packet
being retransmit if the prior clone has not yet been
orphaned or freed.
This logic came with commit 1f3279ae0c ("tcp: avoid
retransmits of TCP packets hanging in host queues")
Thankfully, in the case skb_still_in_host_queue() detects
the initial clone is still in flight, it can use TSQ logic
that will eventually retry later, at the moment the clone
is freed or orphaned.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Neil Spring <ntspring@fb.com>
Reported-by: Jakub Kicinski <kuba@kernel.org>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that all the code is in place, stop rejecting requests to create
resilient next-hop groups.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nexthop replacements et.al. are notified through netlink, but if a delayed
work migrates buckets on the background, userspace will stay oblivious.
Notify these as RTM_NEWNEXTHOPBUCKET events.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow getting (but not setting) individual buckets to inspect the next hop
mapped therein, idle time, and flags.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a dump handler for resilient next hop buckets. When next-hop group ID
is given, it walks buckets of that group, otherwise it walks buckets of all
groups. It then dumps the buckets whose next hops match the given filtering
criteria.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement the netlink messages that allow creation and dumping of resilient
nexthop groups.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The kernel periodically checks the idle time of nexthop buckets to
determine if they are idle and can be re-populated with a new nexthop.
When the resilient nexthop group is offloaded to hardware, the kernel
will not see activity on nexthop buckets unless it is reported from
hardware.
Add a function that can be periodically called by device drivers to
report activity on nexthop buckets after querying it from the underlying
device.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a function that can be called by device drivers to set "offload" or
"trap" indication on nexthop buckets following nexthop notifications and
other changes such as a neighbour becoming invalid.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement the following notifications towards drivers:
- NEXTHOP_EVENT_REPLACE, when a resilient nexthop group is created.
- NEXTHOP_EVENT_BUCKET_REPLACE any time there is a change in assignment of
next hops to hash table buckets. That includes replacements, deletions,
and delayed upkeep cycles. Some bucket notifications can be vetoed by the
driver, to make it possible to propagate bucket busy-ness flags from the
HW back to the algorithm. Some are however forced, e.g. if a next hop is
deleted, all buckets that use this next hop simply must be migrated,
whether the HW wishes so or not.
- NEXTHOP_EVENT_RES_TABLE_PRE_REPLACE, before a resilient nexthop group is
replaced. Usually the driver will get the bucket notifications as well,
and could veto those. But in some cases, a bucket may not be migrated
immediately, but during delayed upkeep, and that is too late to roll the
transaction back. This notification allows the driver to take a look and
veto the new proposed group up front, before anything is committed.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
At this moment, there is only one type of next-hop group: an mpath group,
which implements the hash-threshold algorithm.
To select a next hop, hash-threshold algorithm first assigns a range of
hashes to each next hop in the group, and then selects the next hop by
comparing the SKB hash with the individual ranges. When a next hop is
removed from the group, the ranges are recomputed, which leads to
reassignment of parts of hash space from one next hop to another. While
there will usually be some overlap between the previous and the new
distribution, some traffic flows change the next hop that they resolve to.
That causes problems e.g. as established TCP connections are reset, because
the traffic is forwarded to a server that is not familiar with the
connection.
Resilient hashing is a technique to address the above problem. Resilient
next-hop group has another layer of indirection between the group itself
and its constituent next hops: a hash table. The selection algorithm uses a
straightforward modulo operation to choose a hash bucket, and then reads
the next hop that this bucket contains, and forwards traffic there.
This indirection brings an important feature. In the hash-threshold
algorithm, the range of hashes associated with a next hop must be
continuous. With a hash table, mapping between the hash table buckets and
the individual next hops is arbitrary. Therefore when a next hop is deleted
the buckets that held it are simply reassigned to other next hops. When
weights of next hops in a group are altered, it may be possible to choose a
subset of buckets that are currently not used for forwarding traffic, and
use those to satisfy the new next-hop distribution demands, keeping the
"busy" buckets intact. This way, established flows are ideally kept being
forwarded to the same endpoints through the same paths as before the
next-hop group change.
In a nutshell, the algorithm works as follows. Each next hop has a number
of buckets that it wants to have, according to its weight and the number of
buckets in the hash table. In case of an event that might cause bucket
allocation change, the numbers for individual next hops are updated,
similarly to how ranges are updated for mpath group next hops. Following
that, a new "upkeep" algorithm runs, and for idle buckets that belong to a
next hop that is currently occupying more buckets than it wants (it is
"overweight"), it migrates the buckets to one of the next hops that has
fewer buckets than it wants (it is "underweight"). If, after this, there
are still underweight next hops, another upkeep run is scheduled to a
future time.
Chances are there are not enough "idle" buckets to satisfy the new demands.
The algorithm has knobs to select both what it means for a bucket to be
idle, and for whether and when to forcefully migrate buckets if there keeps
being an insufficient number of idle buckets.
There are three users of the resilient data structures.
- The forwarding code accesses them under RCU, and does not modify them
except for updating the time a selected bucket was last used.
- Netlink code, running under RTNL, which may modify the data.
- The delayed upkeep code, which may modify the data. This runs unlocked,
and mutual exclusion between the RTNL code and the delayed upkeep is
maintained by canceling the delayed work synchronously before the RTNL
code touches anything. Later it restarts the delayed work if necessary.
The RTNL code has to implement next-hop group replacement, next hop
removal, etc. For removal, the mpath code uses a neat trick of having a
backup next hop group structure, doing the necessary changes offline, and
then RCU-swapping them in. However, the hash tables for resilient hashing
are about an order of magnitude larger than the groups themselves (the size
might be e.g. 4K entries), and it was felt that keeping two of them is an
overkill. Both the primary next-hop group and the spare therefore use the
same resilient table, and writers are careful to keep all references valid
for the forwarding code. The hash table references next-hop group entries
from the next-hop group that is currently in the primary role (i.e. not
spare). During the transition from primary to spare, the table references a
mix of both the primary group and the spare. When a next hop is deleted,
the corresponding buckets are not set to NULL, but instead marked as empty,
so that the pointer is valid and can be used by the forwarding code. The
buckets are then migrated to a new next-hop group entry during upkeep. The
only times that the hash table is invalid is the very beginning and very
end of its lifetime. Between those points, it is always kept valid.
This patch introduces the core support code itself. It does not handle
notifications towards drivers, which are kept as if the group were an mpath
one. It does not handle netlink either. The only bit currently exposed to
user space is the new next-hop group type, and that is currently bounced.
There is therefore no way to actually access this code.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
- RTM_NEWNEXTHOP et.al. that handle resilient groups will have a new nested
attribute, NHA_RES_GROUP, whose elements are attributes NHA_RES_GROUP_*.
- RTM_NEWNEXTHOPBUCKET et.al. is a suite of new messages that will
currently serve only for dumping of individual buckets of resilient next
hop groups. For nexthop group buckets, these messages will carry a nested
attribute NHA_RES_BUCKET, whose elements are attributes NHA_RES_BUCKET_*.
There are several reasons why a new suite of messages is created for
nexthop buckets instead of overloading the information on the existing
RTM_{NEW,DEL,GET}NEXTHOP messages.
First, a nexthop group can contain a large number of nexthop buckets (4k
is not unheard of). This imposes limits on the amount of information that
can be encoded for each nexthop bucket given a netlink message is limited
to 64k bytes.
Second, while RTM_NEWNEXTHOPBUCKET is only used for notifications at
this point, in the future it can be extended to provide user space with
control over nexthop buckets configuration.
- The new group type is NEXTHOP_GRP_TYPE_RES. Note that nexthop code is
adjusted to bounce groups with that type for now.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With the introduction of resilient nexthop groups, there will be two types
of multipath groups: the current hash-threshold "mpath" ones, and resilient
groups. Both are multipath, but to determine the fact, the system needs to
consider two flags. This might prove costly in the datapath. Therefore,
introduce a new flag, that should be set for next-hop groups that have more
than one nexthop, and should be considered multipath.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The cited function currently uses rtnl_dereference() to get nh_info from a
handed-in nexthop. However, under the resilient hashing scheme, this
function will not always be called under RTNL, sometimes the mutual
exclusion will be achieved differently. Therefore move the nh_info
extraction from the function to its callers to make it possible to use a
different synchronization guarantee.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, replace assumes that the new group that is given is a
fully-formed object. But mpath groups really only have one attribute, and
that is the constituent next hop configuration. This may not be universally
true. From the usability perspective, it is desirable to allow the replace
operation to adjust just the constituent next hop configuration and leave
the group attributes as such intact.
But the object that keeps track of whether an attribute was or was not
given is the nh_config object, not the next hop or next-hop group. To allow
(selective) attribute updates during NH group replacement, propagate `cfg'
to replace_nexthop() and further to replace_nexthop_grp().
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The extra space before tab space has been removed.
Signed-off-by: Shubhankar Kuranagatti <shubhankarvk@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move generic blackhole dst ops to the core and use them from both
ipv4_dst_blackhole_ops and ip6_dst_blackhole_ops where possible. No
functional change otherwise. We need these also in other locations
and having to define them over and over again is not great.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-03-09
The following pull-request contains BPF updates for your *net-next* tree.
We've added 90 non-merge commits during the last 17 day(s) which contain
a total of 114 files changed, 5158 insertions(+), 1288 deletions(-).
The main changes are:
1) Faster bpf_redirect_map(), from Björn.
2) skmsg cleanup, from Cong.
3) Support for floating point types in BTF, from Ilya.
4) Documentation for sys_bpf commands, from Joe.
5) Support for sk_lookup in bpf_prog_test_run, form Lorenz.
6) Enable task local storage for tracing programs, from Song.
7) bpf_for_each_map_elem() helper, from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Fix transmissions in dynamic SMPS mode in ath9k, from Felix Fietkau.
2) TX skb error handling fix in mt76 driver, also from Felix.
3) Fix BPF_FETCH atomic in x86 JIT, from Brendan Jackman.
4) Avoid double free of percpu pointers when freeing a cloned bpf prog.
From Cong Wang.
5) Use correct printf format for dma_addr_t in ath11k, from Geert
Uytterhoeven.
6) Fix resolve_btfids build with older toolchains, from Kun-Chuan
Hsieh.
7) Don't report truncated frames to mac80211 in mt76 driver, from
Lorenzop Bianconi.
8) Fix watcdog timeout on suspend/resume of stmmac, from Joakim Zhang.
9) mscc ocelot needs NET_DEVLINK selct in Kconfig, from Arnd Bergmann.
10) Fix sign comparison bug in TCP_ZEROCOPY_RECEIVE getsockopt(), from
Arjun Roy.
11) Ignore routes with deleted nexthop object in mlxsw, from Ido
Schimmel.
12) Need to undo tcp early demux lookup sometimes in nf_nat, from
Florian Westphal.
13) Fix gro aggregation for udp encaps with zero csum, from Daniel
Borkmann.
14) Make sure to always use imp*_ndo_send when necessaey, from Jason A.
Donenfeld.
15) Fix TRSCER masks in sh_eth driver from Sergey Shtylyov.
16) prevent overly huge skb allocationsd in qrtr, from Pavel Skripkin.
17) Prevent rx ring copnsumer index loss of sync in enetc, from Vladimir
Oltean.
18) Make sure textsearch copntrol block is large enough, from Wilem de
Bruijn.
19) Revert MAC changes to r8152 leading to instability, from Hates Wang.
20) Advance iov in 9p even for empty reads, from Jissheng Zhang.
21) Double hook unregister in nftables, from PabloNeira Ayuso.
22) Fix memleak in ixgbe, fropm Dinghao Liu.
23) Avoid dups in pkt scheduler class dumps, from Maximilian Heyne.
24) Various mptcp fixes from Florian Westphal, Paolo Abeni, and Geliang
Tang.
25) Fix DOI refcount bugs in cipso, from Paul Moore.
26) One too many irqsave in ibmvnic, from Junlin Yang.
27) Fix infinite loop with MPLS gso segmenting via virtio_net, from
Balazs Nemeth.
* git://git.kernel.org:/pub/scm/linux/kernel/git/netdev/net: (164 commits)
s390/qeth: fix notification for pending buffers during teardown
s390/qeth: schedule TX NAPI on QAOB completion
s390/qeth: improve completion of pending TX buffers
s390/qeth: fix memory leak after failed TX Buffer allocation
net: avoid infinite loop in mpls_gso_segment when mpls_hlen == 0
net: check if protocol extracted by virtio_net_hdr_set_proto is correct
net: dsa: xrs700x: check if partner is same as port in hsr join
net: lapbether: Remove netif_start_queue / netif_stop_queue
atm: idt77252: fix null-ptr-dereference
atm: uPD98402: fix incorrect allocation
atm: fix a typo in the struct description
net: qrtr: fix error return code of qrtr_sendmsg()
mptcp: fix length of ADD_ADDR with port sub-option
net: bonding: fix error return code of bond_neigh_init()
net: enetc: allow hardware timestamping on TX queues with tc-etf enabled
net: enetc: set MAC RX FIFO to recommended value
net: davicom: Use platform_get_irq_optional()
net: davicom: Fix regulator not turned off on driver removal
net: davicom: Fix regulator not turned off on failed probe
net: dsa: fix switchdev objects on bridge master mistakenly being applied on ports
...
We need to use put_unaligned when writing 32-bit DOI value
in cipso_v4_gentag_hdr to avoid unaligned memory access.
v2: unneeded type cast removed as Ondrej Mosnacek suggested.
Signed-off-by: Sergey Nazarov <s-nazarov@yandex.ru>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current CIPSO and CALIPSO refcounting scheme for the DOI
definitions is a bit flawed in that we:
1. Don't correctly match gets/puts in netlbl_cipsov4_list().
2. Decrement the refcount on each attempt to remove the DOI from the
DOI list, only removing it from the list once the refcount drops
to zero.
This patch fixes these problems by adding the missing "puts" to
netlbl_cipsov4_list() and introduces a more conventional, i.e.
not-buggy, refcounting mechanism to the DOI definitions. Upon the
addition of a DOI to the DOI list, it is initialized with a refcount
of one, removing a DOI from the list removes it from the list and
drops the refcount by one; "gets" and "puts" behave as expected with
respect to refcounts, increasing and decreasing the DOI's refcount by
one.
Fixes: b1edeb1023 ("netlabel: Replace protocol/NetLabel linking with refrerence counts")
Fixes: d7cce01504 ("netlabel: Add support for removing a CALIPSO DOI.")
Reported-by: syzbot+9ec037722d2603a9f52e@syzkaller.appspotmail.com
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As far as user space is concerned, blackhole nexthops do not have a
nexthop device and therefore should not be affected by the
administrative or carrier state of any netdev.
However, when the loopback netdev goes down all the blackhole nexthops
are flushed. This happens because internally the kernel associates
blackhole nexthops with the loopback netdev.
This behavior is both confusing to those not familiar with kernel
internals and also diverges from the legacy API where blackhole IPv4
routes are not flushed when the loopback netdev goes down:
# ip route add blackhole 198.51.100.0/24
# ip link set dev lo down
# ip route show 198.51.100.0/24
blackhole 198.51.100.0/24
Blackhole IPv6 routes are flushed, but at least user space knows that
they are associated with the loopback netdev:
# ip -6 route show 2001:db8:1::/64
blackhole 2001:db8:1::/64 dev lo metric 1024 pref medium
Fix this by only flushing blackhole nexthops when the loopback netdev is
unregistered.
Fixes: ab84be7e54 ("net: Initial nexthop code")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reported-by: Donald Sharp <sharpd@nvidia.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A situation can occur where the interface bound to the sk is different
to the interface bound to the sk attached to the skb. The interface
bound to the sk is the correct one however this information is lost inside
xfrm_output2 and instead the sk on the skb is used in xfrm_output_resume
instead. This assumes that the sk bound interface and the bound interface
attached to the sk within the skb are the same which can lead to lookup
failures inside ip_route_me_harder resulting in the packet being dropped.
We have an l2tp v3 tunnel with ipsec protection. The tunnel is in the
global VRF however we have an encapsulated dot1q tunnel interface that
is within a different VRF. We also have a mangle rule that marks the
packets causing them to be processed inside ip_route_me_harder.
Prior to commit 31c70d5956 ("l2tp: keep original skb ownership") this
worked fine as the sk attached to the skb was changed from the dot1q
encapsulated interface to the sk for the tunnel which meant the interface
bound to the sk and the interface bound to the skb were identical.
Commit 46d6c5ae95 ("netfilter: use actual socket sk rather than skb sk
when routing harder") fixed some of these issues however a similar
problem existed in the xfrm code.
Fixes: 31c70d5956 ("l2tp: keep original skb ownership")
Signed-off-by: Evan Nimmo <evan.nimmo@alliedtelesis.co.nz>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Frag needed should only be sent if the header enables DF.
This fix allows packets larger than MTU to pass the vti interface
and be fragmented after encapsulation, aligning behavior with
non-vti xfrm.
Fixes: d6af1a31cc ("vti: Add pmtu handling to vti_xmit.")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
In inet_initpeers(), struct inet_peer on IA32 uses 128 bytes in nowdays.
Get rid of the cascade and use div64_ul() and clamp_val() calculate that
will not need to be adjusted in the future as suggested by Eric Dumazet.
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Yejune Deng <yejune.deng@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There were a few remaining tunnel drivers that didn't receive the prior
conversion to icmp{,v6}_ndo_send. Knowing now that this could lead to
memory corrution (see ee576c47db ("net: icmp: pass zeroed opts from
icmp{,v6}_ndo_send before sending") for details), there's even more
imperative to have these all converted. So this commit goes through the
remaining cases that I could find and does a boring translation to the
ndo variety.
The Fixes: line below is the merge that originally added icmp{,v6}_
ndo_send and converted the first batch of icmp{,v6}_send users. The
rationale then for the change applies equally to this patch. It's just
that these drivers were left out of the initial conversion because these
network devices are hiding in net/ rather than in drivers/net/.
Cc: Florian Westphal <fw@strlen.de>
Cc: Willem de Bruijn <willemb@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: David Ahern <dsahern@kernel.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Fixes: 803381f9f1 ("Merge branch 'icmp-account-for-NAT-when-sending-icmps-from-ndo-layer'")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We noticed a GRO issue for UDP-based encaps such as vxlan/geneve when the
csum for the UDP header itself is 0. In that case, GRO aggregation does
not take place on the phys dev, but instead is deferred to the vxlan/geneve
driver (see trace below).
The reason is essentially that GRO aggregation bails out in udp_gro_receive()
for such case when drivers marked the skb with CHECKSUM_UNNECESSARY (ice, i40e,
others) where for non-zero csums 2abb7cdc0d ("udp: Add support for doing
checksum unnecessary conversion") promotes those skbs to CHECKSUM_COMPLETE
and napi context has csum_valid set. This is however not the case for zero
UDP csum (here: csum_cnt is still 0 and csum_valid continues to be false).
At the same time 57c67ff4bd ("udp: additional GRO support") added matches
on !uh->check ^ !uh2->check as part to determine candidates for aggregation,
so it certainly is expected to handle zero csums in udp_gro_receive(). The
purpose of the check added via 662880f442 ("net: Allow GRO to use and set
levels of checksum unnecessary") seems to catch bad csum and stop aggregation
right away.
One way to fix aggregation in the zero case is to only perform the !csum_valid
check in udp_gro_receive() if uh->check is infact non-zero.
Before:
[...]
swapper 0 [008] 731.946506: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100400 len=1500 (1)
swapper 0 [008] 731.946507: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100200 len=1500
swapper 0 [008] 731.946507: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101100 len=1500
swapper 0 [008] 731.946508: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101700 len=1500
swapper 0 [008] 731.946508: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101b00 len=1500
swapper 0 [008] 731.946508: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100600 len=1500
swapper 0 [008] 731.946508: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100f00 len=1500
swapper 0 [008] 731.946509: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100a00 len=1500
swapper 0 [008] 731.946516: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100500 len=1500
swapper 0 [008] 731.946516: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100700 len=1500
swapper 0 [008] 731.946516: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101d00 len=1500 (2)
swapper 0 [008] 731.946517: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101000 len=1500
swapper 0 [008] 731.946517: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101c00 len=1500
swapper 0 [008] 731.946517: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101400 len=1500
swapper 0 [008] 731.946518: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100e00 len=1500
swapper 0 [008] 731.946518: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101600 len=1500
swapper 0 [008] 731.946521: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100800 len=774
swapper 0 [008] 731.946530: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff966497100400 len=14032 (1)
swapper 0 [008] 731.946530: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff966497101d00 len=9112 (2)
[...]
# netperf -H 10.55.10.4 -t TCP_STREAM -l 20
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.55.10.4 () port 0 AF_INET : demo
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
87380 16384 16384 20.01 13129.24
After:
[...]
swapper 0 [026] 521.862641: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff93ab0d479000 len=11286 (1)
swapper 0 [026] 521.862643: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff93ab0d479000 len=11236 (1)
swapper 0 [026] 521.862650: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff93ab0d478500 len=2898 (2)
swapper 0 [026] 521.862650: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff93ab0d479f00 len=8490 (3)
swapper 0 [026] 521.862653: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff93ab0d478500 len=2848 (2)
swapper 0 [026] 521.862653: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff93ab0d479f00 len=8440 (3)
[...]
# netperf -H 10.55.10.4 -t TCP_STREAM -l 20
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.55.10.4 () port 0 AF_INET : demo
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
87380 16384 16384 20.01 24576.53
Fixes: 57c67ff4bd ("udp: additional GRO support")
Fixes: 662880f442 ("net: Allow GRO to use and set levels of checksum unnecessary")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Tom Herbert <tom@herbertland.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20210226212248.8300-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=oc8u
-----END PGP SIGNATURE-----
Merge tag 'io_uring-worker.v3-2021-02-25' of git://git.kernel.dk/linux-block
Pull io_uring thread rewrite from Jens Axboe:
"This converts the io-wq workers to be forked off the tasks in question
instead of being kernel threads that assume various bits of the
original task identity.
This kills > 400 lines of code from io_uring/io-wq, and it's the worst
part of the code. We've had several bugs in this area, and the worry
is always that we could be missing some pieces for file types doing
unusual things (recent /dev/tty example comes to mind, userfaultfd
reads installing file descriptors is another fun one... - both of
which need special handling, and I bet it's not the last weird oddity
we'll find).
With these identical workers, we can have full confidence that we're
never missing anything. That, in itself, is a huge win. Outside of
that, it's also more efficient since we're not wasting space and code
on tracking state, or switching between different states.
I'm sure we're going to find little things to patch up after this
series, but testing has been pretty thorough, from the usual
regression suite to production. Any issue that may crop up should be
manageable.
There's also a nice series of further reductions we can do on top of
this, but I wanted to get the meat of it out sooner rather than later.
The general worry here isn't that it's fundamentally broken. Most of
the little issues we've found over the last week have been related to
just changes in how thread startup/exit is done, since that's the main
difference between using kthreads and these kinds of threads. In fact,
if all goes according to plan, I want to get this into the 5.10 and
5.11 stable branches as well.
That said, the changes outside of io_uring/io-wq are:
- arch setup, simple one-liner to each arch copy_thread()
implementation.
- Removal of net and proc restrictions for io_uring, they are no
longer needed or useful"
* tag 'io_uring-worker.v3-2021-02-25' of git://git.kernel.dk/linux-block: (30 commits)
io-wq: remove now unused IO_WQ_BIT_ERROR
io_uring: fix SQPOLL thread handling over exec
io-wq: improve manager/worker handling over exec
io_uring: ensure SQPOLL startup is triggered before error shutdown
io-wq: make buffered file write hashed work map per-ctx
io-wq: fix race around io_worker grabbing
io-wq: fix races around manager/worker creation and task exit
io_uring: ensure io-wq context is always destroyed for tasks
arch: ensure parisc/powerpc handle PF_IO_WORKER in copy_thread()
io_uring: cleanup ->user usage
io-wq: remove nr_process accounting
io_uring: flag new native workers with IORING_FEAT_NATIVE_WORKERS
net: remove cmsg restriction from io_uring based send/recvmsg calls
Revert "proc: don't allow async path resolution of /proc/self components"
Revert "proc: don't allow async path resolution of /proc/thread-self components"
io_uring: move SQPOLL thread io-wq forked worker
io-wq: make io_wq_fork_thread() available to other users
io-wq: only remove worker from free_list, if it was there
io_uring: remove io_identity
io_uring: remove any grabbing of context
...
getsockopt(TCP_ZEROCOPY_RECEIVE) has a bug where we read a
user-provided "len" field of type signed int, and then compare the
value to the result of an "offsetofend" operation, which is unsigned.
Negative values provided by the user will be promoted to large
positive numbers; thus checking that len < offsetofend() will return
false when the intention was that it return true.
Note that while len is originally checked for negative values earlier
on in do_tcp_getsockopt(), subsequent calls to get_user() re-read the
value from userspace which may have changed in the meantime.
Therefore, re-add the check for negative values after the call to
get_user in the handler code for TCP_ZEROCOPY_RECEIVE.
Fixes: c8856c0514 ("tcp-zerocopy: Return inq along with tcp receive zerocopy.")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Arjun Roy <arjunroy@google.com>
Link: https://lore.kernel.org/r/20210225232628.4033281-1-arjunroy.kdev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As suggested by John, clean up sockmap related Kconfigs:
Reduce the scope of CONFIG_BPF_STREAM_PARSER down to TCP stream
parser, to reflect its name.
Make the rest sockmap code simply depend on CONFIG_BPF_SYSCALL
and CONFIG_INET, the latter is still needed at this point because
of TCP/UDP proto update. And leave CONFIG_NET_SOCK_MSG untouched,
as it is used by non-sockmap cases.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Lorenz Bauer <lmb@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210223184934.6054-2-xiyou.wangcong@gmail.com
Kumar Kartikeya Dwivedi