Commit Graph

19205 Commits

Author SHA1 Message Date
Ramalingam C 4c719c256a drm/i915: Gathering the HDCP1.4 routines together
All HDCP1.4 routines are gathered together, followed by the generic
functions those can be extended for HDCP2.2 too.

Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-2-git-send-email-ramalingam.c@intel.com
2019-02-20 20:37:58 +01:00
Chris Wilson c1d1746f6d drm/i915: Avoid reset lock in writing fence registers
The idea of taking the reset lock around writing the fence register was
to serialise the mmio write we also perform during the reset where those
registers get clobbered. However, the lock is overkill as write tearing
between reset and fence_update() is harmless; the final value of the
fence register is the same. A race between revoke_fences() and
fence_update() is also harmless at this point as on the fault path where
this is necessary, we acquire the reset lock to coordinate ourselves in
the upper layer.

The danger of acquiring the reset lock again in fence_update() is that
we may recurse from the shrinker along the i915_gem_fault() path.

<4> [125.739646] ============================================
<4> [125.739652] WARNING: possible recursive locking detected
<4> [125.739659] 5.0.0-rc6-ga6e4cbf00557-drmtip_223+ #1 Tainted: G     U
<4> [125.739666] --------------------------------------------
<4> [125.739672] gem_mmap_gtt/1017 is trying to acquire lock:
<4> [125.739679] 00000000a730190a (&dev_priv->gpu_error.reset_backoff_srcu){+.+.}, at: i915_reset_trylock+0x0/0x310 [i915]
<4> [125.739848]
but task is already holding lock:
<4> [125.739854] 00000000a730190a (&dev_priv->gpu_error.reset_backoff_srcu){+.+.}, at: i915_reset_trylock+0x192/0x310 [i915]
<4> [125.739918]
other info that might help us debug this:
<4> [125.739925]  Possible unsafe locking scenario:

<4> [125.739930]        CPU0
<4> [125.739934]        ----
<4> [125.739937]   lock(&dev_priv->gpu_error.reset_backoff_srcu);
<4> [125.739944]   lock(&dev_priv->gpu_error.reset_backoff_srcu);
<4> [125.739950]
 *** DEADLOCK ***

<4> [125.739958]  May be due to missing lock nesting notation

<4> [125.739966] 5 locks held by gem_mmap_gtt/1017:
<4> [125.739972]  #0: 00000000471f682c (&mm->mmap_sem){++++}, at: __do_page_fault+0x133/0x500
<4> [125.739987]  #1: 0000000026542685 (&dev->struct_mutex){+.+.}, at: i915_gem_fault+0x1f6/0x860 [i915]
<4> [125.740061]  #2: 00000000a730190a (&dev_priv->gpu_error.reset_backoff_srcu){+.+.}, at: i915_reset_trylock+0x192/0x310 [i915]
<4> [125.740126]  #3: 00000000c828eb4f (fs_reclaim){+.+.}, at: fs_reclaim_acquire.part.25+0x0/0x30
<4> [125.740140]  #4: 000000002d360d65 (shrinker_rwsem){++++}, at: shrink_slab+0x1cb/0x2c0
<4> [125.740151]
stack backtrace:
<4> [125.740159] CPU: 1 PID: 1017 Comm: gem_mmap_gtt Tainted: G     U            5.0.0-rc6-ga6e4cbf00557-drmtip_223+ #1
<4> [125.740170] Hardware name: Dell Inc.                 OptiPlex 745                 /0GW726, BIOS 2.3.1  05/21/2007
<4> [125.740180] Call Trace:
<4> [125.740189]  dump_stack+0x67/0x9b
<4> [125.740199]  __lock_acquire+0xc75/0x1b00
<4> [125.740209]  ? arch_tlb_finish_mmu+0x2a/0xa0
<4> [125.740216]  ? tlb_finish_mmu+0x1a/0x30
<4> [125.740222]  ? zap_page_range_single+0xe2/0x130
<4> [125.740230]  ? lock_acquire+0xa6/0x1c0
<4> [125.740237]  lock_acquire+0xa6/0x1c0
<4> [125.740296]  ? i915_clear_error_registers+0x280/0x280 [i915]
<4> [125.740357]  i915_reset_trylock+0x44/0x310 [i915]
<4> [125.740417]  ? i915_clear_error_registers+0x280/0x280 [i915]
<4> [125.740426]  ? lockdep_hardirqs_on+0xe0/0x1b0
<4> [125.740434]  ? _raw_spin_unlock_irqrestore+0x39/0x60
<4> [125.740499]  fence_update+0x218/0x470 [i915]
<4> [125.740571]  i915_vma_unbind+0xa6/0x550 [i915]
<4> [125.740640]  i915_gem_object_unbind+0xfa/0x190 [i915]
<4> [125.740711]  i915_gem_shrink+0x2dc/0x590 [i915]
<4> [125.740722]  ? ___preempt_schedule+0x16/0x18
<4> [125.740792]  ? i915_gem_shrinker_scan+0xc9/0x130 [i915]
<4> [125.740861]  i915_gem_shrinker_scan+0xc9/0x130 [i915]
<4> [125.740870]  do_shrink_slab+0x143/0x3f0
<4> [125.740878]  shrink_slab+0x228/0x2c0
<4> [125.740886]  shrink_node+0x167/0x450
<4> [125.740894]  do_try_to_free_pages+0xc4/0x340
<4> [125.740902]  try_to_free_pages+0xdc/0x2e0
<4> [125.740911]  __alloc_pages_nodemask+0x662/0x1110
<4> [125.740921]  ? reacquire_held_locks+0xb5/0x1b0
<4> [125.740928]  ? reacquire_held_locks+0xb5/0x1b0
<4> [125.740986]  ? i915_reset_trylock+0x192/0x310 [i915]
<4> [125.741045]  ? i915_memcpy_init_early+0x30/0x30 [i915]
<4> [125.741054]  pte_alloc_one+0x12/0x70
<4> [125.741060]  __pte_alloc+0x11/0xf0
<4> [125.741067]  apply_to_page_range+0x37e/0x440
<4> [125.741127]  remap_io_mapping+0x6c/0x100 [i915]
<4> [125.741196]  i915_gem_fault+0x5a9/0x860 [i915]
<4> [125.741204]  ? ptlock_alloc+0x15/0x30
<4> [125.741212]  __do_fault+0x2c/0xb0
<4> [125.741218]  __handle_mm_fault+0x8ee/0xfa0
<4> [125.741227]  handle_mm_fault+0x196/0x3a0
<4> [125.741235]  __do_page_fault+0x246/0x500
<4> [125.741243]  ? page_fault+0x8/0x30
<4> [125.741250]  page_fault+0x1e/0x30
<4> [125.741256] RIP: 0033:0x55d0cc456e12
<4> [125.741264] Code: b0 df ff ff 89 c2 8b 85 70 df ff ff 01 c2 8b 85 70 df ff ff 48 98 48 8d 0c 85 00 00 00 00 48 8b 85 e0 df ff ff 48 01 c8 f7 d2 <89> 10 83 85 70 df ff ff 01 81 bd 70 df ff ff ff 03 00 00 7e be 48
<4> [125.741280] RSP: 002b:00007ffc1bab7ab0 EFLAGS: 00010206
<4> [125.741287] RAX: 00007fc787cb6000 RBX: 0000000000000000 RCX: 0000000000000000
<4> [125.741295] RDX: 00000000ffffffff RSI: 0000000000005401 RDI: 0000000000000002
<4> [125.741303] RBP: 00007ffc1bab9b70 R08: 00007ffc1bab7920 R09: 000000000000001b
<4> [125.741310] R10: 7165722074736554 R11: 0000000000000246 R12: 000055d0cc454a80
<4> [125.741318] R13: 00007ffc1bab9f60 R14: 0000000000000000 R15: 0000000000000000

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109665
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190219122215.8941-4-chris@chris-wilson.co.uk
2019-02-20 16:40:13 +00:00
Chris Wilson c41166f9a1 drm/i915: Beware temporary wedging when determining -EIO
At a few points in our uABI, we check to see if the driver is wedged and
report -EIO back to the user in that case. However, as we perform the
check and reset asynchronously (where once before they were both
serialised by the struct_mutex), we may instead see the temporary wedging
used to cancel inflight rendering to avoid a deadlock during reset
(caused by either us timing out in our reset handler,
i915_wedge_on_timeout or with malice aforethought in intel_reset_prepare
for a stuck modeset). If we suspect this is the case, that is we see a
wedged driver *and* reset in progress, then wait until the reset is
resolved before reporting upon the wedged status.

v2: might_sleep() (Mika)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109580
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190220145637.23503-1-chris@chris-wilson.co.uk
2019-02-20 16:31:08 +00:00
Joonas Lahtinen 47ed55a9bb drm/i915: Update DRIVER_DATE to 20190220
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-02-20 12:05:46 +02:00
Joonas Lahtinen b08e776c22 Prep patches + headers for the mei-hdcp/i915 component interfaces
Also contains the prep work in the component helpers plus adjustements
 for the snd-hda/i915 component interface.
 
 Plus one small static inline in the drm_hdcp.h header that both i915
 and mei_hdcp will need.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEb4nG6jLu8Y5XI+PfTA9ye/CYqnEFAlxrq5gACgkQTA9ye/CY
 qnFXfg/+KrN1ALzV2oSPM2lIIiXdvRuMmRdrIUE5Ft3/KEJyHTFZNDwNs9C/sJFM
 hMKZBQX7AWKMx/yA+h3b7AEeYNJs/nh4HhtKx0U8g0ISb8pX+ofo5yP5wcgB/o7j
 5WH+vICwOjP6ELzREFK7AKnw+X+j/wdmZVYdSgy8S8p1qPVuFoqAFSLZ1/sp6rSb
 OUw7IdtZHAr8+gQiVrcyFuOqyQDTyu6XL/a0+8cRkIZDsIRwwF51UWZ8PqjECo6m
 jDExqQ8zz7gFaiuR3iCk0DHyuu+nRrkR/6MObv0TIpeL+lH3YvPSF72c4qN3rN/S
 p/Tb/GAW1IuWIWxVEYY9sY7SvY20M/rsQRdqC9a0OpoQU56mZpJasAqa3nYjhZUx
 YSYj66S/F93UqkkQ0otxzRzEEi0D7Xqme1ZwX9YOMPzOqLQFqYOwwZGNTPYypUyx
 xywKPPgv09EgtbUmEjodHXfqpMBnATwFYMUQ9qhpjD/NkR7Q/efLgSTn4SZ0X5VV
 NaAaFsxrdZXin8ywpop2OMy3WMm6kA9qLJCUa4sypF6bDnbBwEk/QSRFErMHmxB3
 Fpr4yE53LuCG6SZ/3Si4XmkLyfXbWPHHU8GbgPPzCcaospnszJesb+BaU87NjLHi
 6XaUNKT2L0anUNVS280dMrlQyRUXvl+6Nh8unWncGqY6bbhmO9k=
 =+00+
 -----END PGP SIGNATURE-----

Merge tag 'topic/mei-hdcp-2019-02-19' of git://anongit.freedesktop.org/drm/drm-intel into drm-intel-next-queued

Prep patches + headers for the mei-hdcp/i915 component interfaces

Also contains the prep work in the component helpers plus adjustements
for the snd-hda/i915 component interface.

Plus one small static inline in the drm_hdcp.h header that both i915
and mei_hdcp will need.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
From: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190219071619.GA11016@phenom.ffwll.local
2019-02-20 11:53:48 +02:00
Joonas Lahtinen d0781a89c0 Merge drm/drm-next into drm-intel-next-queued
Doing a backmerge to be able to merge topic/mei-hdcp-2019-02-19 PR.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-02-20 11:04:08 +02:00
Chris Wilson 7f4127c483 drm/i915: Use time based guilty context banning
Currently, we accumulate each time a context hangs the GPU, offset
against the number of requests it submits, and if that score exceeds a
certain threshold, we ban that context from submitting any more requests
(cancelling any work in flight). In contrast, we use a simple timer on
the file, that if we see more than a 9 hangs faster than 60s apart in
total across all of its contexts, we will ban the client from creating
any more contexts. This leads to a confusing situation where the file
may be banned before the context, so lets use a simple timer scheme for
each.

If the context submits 3 hanging requests within a 120s period, declare
it forbidden to ever send more requests.

This has the advantage of not being easy to repair by simply sending
empty requests, but has the disadvantage that if the context is idle
then it is forgiven. However, if the context is idle, it is not
disrupting the system, but a hog can evade the request counting and
cause much more severe disruption to the system.

Updating ban_score from request retirement is dubious as the retirement
is purposely not in sync with request submission (i.e. we try and batch
retirement to reduce overhead and avoid latency on submission), which
leads to surprising situations where we can forgive a hang immediately
due to a backlog of requests from before the hang being retired
afterwards.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190219122215.8941-2-chris@chris-wilson.co.uk
2019-02-19 14:46:21 +00:00
Chris Wilson 8f54b3c6c9 drm/i915: Trim delays for wedging
CI still reports the occasional multi-second delay for resets, in
particular along the wedge+recovery paths. As the likely, and unbounded,
delay here is from sync_rcu, use the expedited variant instead.

Testcase: igt/gem_eio/unwedge-stress
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190219122215.8941-7-chris@chris-wilson.co.uk
2019-02-19 14:41:32 +00:00
Chris Wilson 370d757da9 drm/i915: Move verify_wm_state() to heap
The stack usage exceeded 1024 bytes prompting warnings on conservative
setups, so move the temporary allocation for HW readback onto the heap.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190219122215.8941-1-chris@chris-wilson.co.uk
2019-02-19 14:27:35 +00:00
Chris Wilson 156b16f9b9 drm/i915: Restore interrupt enabling after a reset
At least on i965g and i965gm, performing a device reset clobbers the IER
resulting in loss of interrupts thereafter. So, run the irq_postinstall
hook to restore them.

v2: Ville pointed out that he already attempted to solve this problem by
reinstalling the interrupts in intel_reset_finish() (part of the display
handling around reset). However, reinstalling the irq clobbers the
i915->irq_mask which we need for handling MI_USER_INTERRUPTS, and does
so too late to handle any interrupts generated from resuming the rings.
The simple solution to both is to pull the interrupt reenabling from
afterwards to around the device reset.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190218153106.16768-1-chris@chris-wilson.co.uk
2019-02-18 16:19:35 +00:00
Chris Wilson e4106dae0f drm/i915/selftests: Make unbannable contexts for reset handling
igt_ctx_sseu was caught using bannable contexts, and in the course of
resetting rapidly to run its test, was banned. Don't let ourselves ban
the test!

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190218145051.18981-1-chris@chris-wilson.co.uk
2019-02-18 16:00:34 +00:00
Chris Wilson ba4fda620a drm/i915: Optionally disable automatic recovery after a GPU reset
Some clients, such as mesa, may only emit minimal incremental batches
that rely on the logical context state from previous batches. They know
that recovery is impossible after a hang as their required GPU state is
lost, and that each in flight and subsequent batch will hang (resetting
the context image back to default perpetuating the problem).

To avoid getting into the state in the first place, we can allow clients
to opt out of automatic recovery and elect to ban any guilty context
following a hang. This prevents the continual stream of hangs and allows
the client to recreate their context and rebuild the state from scratch.

v2: Prefer calling it recoverable rather than unrecoverable.

References: https://lists.freedesktop.org/archives/mesa-dev/2019-February/215431.html
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org> # for mesa
Link: https://patchwork.freedesktop.org/patch/msgid/20190218105821.17293-1-chris@chris-wilson.co.uk
2019-02-18 11:50:53 +00:00
Dave Airlie c06de56121 Linux 5.0-rc7
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlxqHJYeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGWl8H/jPI4EipzD2GbnjZ
 GaFpMBBjcXBaVmoA+Y69so+7BHx1Ql+5GQtqbK0RHJRb9qEPLw3FBhHNjM/N8Sgf
 nSrK+GnBZp9s+k/NR/Yf2RacUR3jhz+Q9JEoQd3u9bFUeQyvE8Rf3vgtoBBwFOfz
 +t7N1memYVF3asLGWB4e4sP1YVMGfseTQpSPojvM30YWM86Bv+QtSx1AGgHczQIM
 kMKealR8ZPelN6JAXgLhQ5opDojBrE4YKB98pwsMDI6abz0Tz2JLFEUTTxsv5XNN
 o/Iz+XDoylskEyxN2unNWfHx7Swkvoklog8J/hDg5XlTvipL/WkT66PHBgcGMNvj
 BW9GgU8=
 =ZizU
 -----END PGP SIGNATURE-----

Merge v5.0-rc7 into drm-next

Backmerging for nouveau and imx that needed some fixes for next pulls.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2019-02-18 13:27:15 +10:00
Chris Wilson 83e3a21530 drm/i915/selftests: Move local mock_ggtt allocations to the heap
This struct appears quite large and pushes our stack frame over
1024 bytes -- too high for conservative setups. So move the mock_ggtt
struct to the heap.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190217202518.24730-1-chris@chris-wilson.co.uk
2019-02-17 21:07:46 +00:00
Chris Wilson 2a4a275403 drm/i915/selftests: Always free spinner on __sseu_prepare error
Prepare a nice little onion unwind to ensure that we always free the
spinner if we __sseu_prepare fails.

Fixes: c06ee6ff2c ("drm/i915/selftests: Context SSEU reconfiguration tests")
Reported-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190215195010.16637-1-chris@chris-wilson.co.uk
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
2019-02-16 11:06:22 +00:00
Chris Wilson d9b308b1f8 drm/i915/fbdev: Actually configure untiled displays
If we skipped all the connectors that were not part of a tile, we would
leave conn_seq=0 and conn_configured=0, convincing ourselves that we
had stagnated in our configuration attempts. Avoid this situation by
starting conn_seq=ALL_CONNECTORS, and repeating until we find no more
connectors to configure.

Fixes: 754a76591b ("drm/i915/fbdev: Stop repeating tile configuration on stagnation")
Reported-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190215123019.32283-1-chris@chris-wilson.co.uk
Cc: <stable@vger.kernel.org> # v3.19+
2019-02-16 09:02:50 +00:00
Ville Syrjälä c48b86f90e drm/i915: Wrap plane update/disable hook calls
Wrap the .update_plane()/.update_slave()/.disable_plane() vfunc
calls into helpers which also take care to emit the appropriate
tracepoint.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190206204910.13965-4-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-02-15 20:59:22 +02:00
Ville Syrjälä d64e6078a1 drm/i915: Add overlooked plane disable tracepoint into intel_crtc_disable_planes()
intel_crtc_disable_planes() disables the planes so it should
trigger the appropriate tracepoint.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190206204910.13965-3-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-02-15 20:59:02 +02:00
Ville Syrjälä 0b2599a43c drm/i915: Add pipe enable/disable tracepoints
Add tracepoints for pipe enable/disable. We'll include the
frame/scanline counters for all pipes in these tracepoints to
help in diagnosing underruns and whatnot when enabling/disabling
pipes in parallel with plane updates/flips on another pipe.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190206204910.13965-2-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-02-15 20:57:36 +02:00
Ville Syrjälä 5cee6c4587 drm/i915: Add pipe crc tracepoint
Add a tracepoint for pipe crc. Makes life much simpler when staring at
traces when hunting for fifo underruns and other issues which cause
corrupted frames. We'll add the tracepoint before filtering out any
potentially bogus crcs during modeset (should actually verify if that
filtering is even correct anymore...)

v2: s/crcs[5]/*crcs/ in the function argument because something
    in the macros wants to do sizeof(crcs) and gcc likes to
    warn us it's not an actual array so the size may not be
    as expected. The silly bugger even does that for 'crcs[]'
    causing us to lose any helpful syntactic hint that we
    are in fact dealing with an array (kbuild test robot)

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190206204910.13965-1-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-02-15 20:57:33 +02:00
Chris Wilson 9095c86374 drm/i915/selftests: Drop unnecessary struct_mutex around i915_reset()
Since we no longer need to hold struct_mutex to perform a global device
reset, don't do so for igt_reset_wedge().

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190215102732.15520-2-chris@chris-wilson.co.uk
2019-02-15 18:17:30 +00:00
Ramalingam C 8605a13660 drm/i915: enum port definition is moved into i915_drm.h
For the reusability of the enum port in other driver modules
(like mei_hdcp), enum port definition is moved from I915 local header
intel_display.h to drm/i915_drm.h

Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[danvet: Fix subject prefix.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550219730-17734-3-git-send-email-ramalingam.c@intel.com
2019-02-15 18:56:35 +01:00
Chris Wilson d9e61b66a5 drm/i915: Defer application of request banning to submission
As we currently do not check on submission whether the context is banned
in a timely manner it is possible for some requests to escape
cancellation after their parent context is banned. By moving the ban
into the request submission under the engine->timeline.lock, we
serialise it with the reset and setting of the context ban.

References: eb8d0f5af4 ("drm/i915: Remove GPU reset dependence on struct_mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190213182737.12695-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
2019-02-15 12:59:26 +00:00
Chris Wilson c836eb79c0 drm/i915/selftests: Always use an active engine while resetting
Currently, we only try to reset a live engine for checking the whitelist
retention across a per-engine reset. For safety, it appears we need to
prime the system with a hanging spinner before performing a full-device
reset. (Figuring out the root cause behind the instability with handling
a reset during a no-op request is a challenge for another test, the
whitelist test has its own purpose.)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109626
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190213224805.32021-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
2019-02-15 09:37:31 +00:00
Chris Wilson 9a3b19a16d drm/i915: Only try to park engines after a failed reset
Currently we try to stop the engine by programming the ring registers to
be disabled before we perform the reset. Sometimes, we see the context
image also have invalid ring registers, which one presumes may be
actually caused by us doing so. Lets risk not doing programming the
ring to zero on the first attempt to avoid preserving that corruption
into the context image, leaving the w/a in place for subsequent
reset attempts.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190213232047.8486-1-chris@chris-wilson.co.uk
2019-02-14 21:41:45 +00:00
Chris Wilson d31c85fc86 snd/hda, drm/i915: Track the display_power_status using a cookie
drm/i915 is tracking all wakeref owners with a cookie in order to
identify leaks. To that end, each rpm acquisition ops->get_power is
assigned a cookie which should be passed to ops->put_power to signify
its release (and removal from the list of wakeref owners). As snd/hda is
already using a bool to track current status of display_power extending
that to an unsigned long to hold the boolean cookie is a trivial
extension, and will quell all doubt that snd/hda is the cause of the
device runtime pm leaks.

v2: Keep using the power abstraction for local wakeref tracking.
v3: BUILD_BUG_ON impedance mismatch

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Jani Nikula <jani.nikula@intel.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190213152109.16997-1-chris@chris-wilson.co.uk
2019-02-14 21:04:47 +00:00
Ville Syrjälä 290248c27c drm/i915: Implement new w/a for underruns with wm1+ disabled
The new workaround from the hw team involves leaving WM1
still disabled but programming the blocks value
identically to WM0, and we also need to set the "ignore
lines watermark" bit for WM1.

v2: Fix commit message wording a bit

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190213165424.22904-3-ville.syrjala@linux.intel.com
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
2019-02-14 21:35:19 +02:00
Ville Syrjälä 2ed8e1f560 drm/i915: Include "ignore lines" in skl+ wm state
We'll need to poke at the "ignore lines" bit in the skl+
watermark registers for a w/a. Include that bit in the wm
state.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190213165424.22904-2-ville.syrjala@linux.intel.com
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
2019-02-14 21:30:30 +02:00
Ville Syrjälä bfe0cd2851 Revert "drm/i915: W/A for underruns with WM1+ disabled on icl"
This reverts commit bf002c1007.

The hw team has come up with a better workaround. So
let's get rid of this one.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190213165424.22904-1-ville.syrjala@linux.intel.com
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
2019-02-14 21:29:42 +02:00
Aditya Swarup 58106b7d81 drm/i915: Make MG PHY macros semantically consistent
Organize MG PHY macro definitions semantically based on dword, lane and
port (in this order).

Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Manasi navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190128220012.13122-3-aditya.swarup@intel.com
2019-02-14 15:23:21 +02:00
Aditya Swarup 9194e42a18 drm/i915: Make combo PHY DDI macro definitions consistent for ICL and CNL
Organize combo PHY DDI macro definitions semantically based on dword,
lane and port (in this order).

Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190128220012.13122-2-aditya.swarup@intel.com
2019-02-14 15:22:34 +02:00
Ville Syrjälä 5e0b669765 drm/i915: Assert that VED and ISP are power gated
As there are no upstream drivers for VED or ISP let's just
assert that they are power gated. Otherwise they would
prevent s0ix entry.

For ISP this is only relevant when it is not exposed as a
PCI device and instead is a subordinate of the gunit. When
exposed as a PCI device it will be handled by the
atomisp2_pm driver.

On my VLV FFRD8 board the firmware power gates both of these
by default. Let's assume that is always the case and just
WARN if we ever encounter something different.

Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181129175504.3630-2-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
2019-02-13 18:43:50 +02:00
Ville Syrjälä c11b813f53 drm/i915: s/PUNIT_REG_DSPFREQ/PUNIT_REG_DSPSSPM/
Rename the punit display power register to match the spec.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181129175504.3630-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
2019-02-13 18:36:23 +02:00
Chris Wilson 62eb3c24b3 drm/i915: Apply rps waitboosting for dma_fence_wait_timeout()
As time goes by, usage of generic ioctls such as drm_syncobj and
sync_file are on the increase bypassing i915-specific ioctls like
GEM_WAIT. Currently, we only apply waitboosting to our driver ioctls as
we track the file/client and account the waitboosting to them. However,
since commit 7b92c1bd05 ("drm/i915: Avoid keeping waitboost active for
signaling threads"), we no longer have been applying the client
ratelimiting on waitboosts and so that information has only been used
for debug tracking.

Push the application of waitboosting down to the common
i915_request_wait, and apply it to all foreign fence waits as well.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Eero Tamminen <eero.t.tamminen@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190213092504.25709-1-chris@chris-wilson.co.uk
2019-02-13 12:16:39 +00:00
Uma Shankar e6ed078d6d drm/i915/icl: Add degamma and gamma lut size to gen11 caps
Add the degamma and gamma lut sizes to gen11 capability
structure.

Note: Currently this doesn't account for the extended range gamma
entries and this will be addressed with new segmented gamma ABI
in a future patch.

v2: Reorder the patch as per Maarten's suggestion.

v3: Rebase

v4: Updated commit message with a note as per Matt's suggestion.

v5: No Change.

Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1549893025-21837-6-git-send-email-uma.shankar@intel.com
2019-02-13 11:25:53 +01:00
Uma Shankar a91de58054 drm/i915/icl: Enable pipe output csc
GEN11+ onwards an output csc hardware block has been added.
This is after the pipe gamma block and is in addition to the
legacy pipe CSC block. Primary use case for this block is to
convert RGB to YUV in case sink supports YUV.
This patch adds supports for the same.

v2: This is added after splitting the existing ICL pipe CSC
handling. As per Matt's suggestion, made this to co-exist
with existing pipe CSC, wherein both can be enabled if a
certain usecase arises.

v3: Fixed an issue with co-existence of output csc and normal
pipe csc, spotted by Matt. Put the csc mode flag enabling to
color_check to align with atomic.

v4: Fixed macro alignment and checkpatch complaints wrt line over
100 characters limit.

Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1549893025-21837-5-git-send-email-uma.shankar@intel.com
2019-02-13 11:25:44 +01:00
Uma Shankar 255fcfbc3c drm/i915/icl: Enable ICL Pipe CSC block
Enable ICL pipe csc hardware. CSC block is enabled
in CSC_MODE register instead of PLANE_COLOR_CTL.

ToDO: Extend the ABI to accept 32 bit coefficient values
instead of 16bit for future platforms.

v2: Addressed Maarten's review comments.

v3: Addressed Matt's review comments. Removed rmw patterns
as suggested by Matt.

v4: Addressed Matt's review comments.

v5: Addressed Ville's review comments.

v6: Separated pipe output csc programming from regular csc.

v7: Rebase

Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1549893025-21837-4-git-send-email-uma.shankar@intel.com
2019-02-13 11:25:34 +01:00
Uma Shankar 13717cef4c drm/i915/icl: Add icl pipe degamma and gamma support
Add support for icl pipe degamma and gamma.

v2: Removed a POSTING_READ and corrected the Bit
Definition as per Maarten's comments.

v3: Addressed Matt's review comments. Removed rmw patterns
as suggested by Matt.

v4: Fixed Matt's review comments.

v5: Corrected macro alignment as per Jani Nikula's comments.
Addressed Ville and Matt's  review comments.

v6: Merged ICL degamma handling with GLK and dropped ICL
degamma function as per Ville and Matt's comments.

v7: updated gamma_mode state with pre csc gammma and post
gamma enabling in intel_color_check to align with atomic.

v8: Addressed Maarten's review comments.

Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1549893025-21837-3-git-send-email-uma.shankar@intel.com
2019-02-13 11:25:24 +01:00
Uma Shankar 8957129cb3 drm/i915/glk: Fix degamma lut programming
Fixed the glk degamma lut programming which currently
was hard coding a linear lut all the time, making degamma
block of glk basically a pass through.

Currently degamma lut for glk is assigned as 0 in platform
configuration. Updated the same to 33 as per the hardware
capability. IGT tests for degamma were getting skipped due to
this, spotted by Swati.

ToDo: The current gamma/degamm lut ABI has just 16bit for each
color component. This is not enough for GLK+, since input
precision is increased to 3.16 which will need 19bit entries.

v2: Added Matt's RB.

v3: Changed uint32_t to u32.

v4: Fixed Maarten's review comment

Credits-to: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1549893025-21837-2-git-send-email-uma.shankar@intel.com
2019-02-13 11:25:14 +01:00
Chris Wilson b3b0391af2 drm/i915: Detect potential i915_reset_trylock() lockups
Use lockdep to warn before we wait indefinitely in case we may be
waiting indefinitely.

Suggested-by: Mika Kuoppala <mika.kuoppala@intel.com>
References: 2caffbf117 ("drm/i915: Revoke mmaps and prevent access to fence registers across reset")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190212130831.14425-2-chris@chris-wilson.co.uk
2019-02-12 16:41:35 +00:00
Chris Wilson aeaaa55c73 drm/i915: Recursive i915_reset_trylock() verboten
We cannot nest i915_reset_trylock() as the inner may wait for the
I915_RESET_BACKOFF which in turn is waiting upon sync_srcu who is
waiting for our outermost lock. As we take the reset srcu around the
fence update, we have to defer taking it in i915_gem_fault() until after
we acquire the pin on the fence to avoid nesting. This is a little ugly,
but still works. If a reset occurs between i915_vma_pin_fence() and the
second reset lock, the reset will restore the fence register back to the
pinned value before the reset lock allows us to proceed (our mmap won't
be revoked as we haven't yet marked it as being a userfault as that
requires us to hold the reset lock), so the pagefault is still
serialised with the revocation in reset.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109605
Fixes: 2caffbf117 ("drm/i915: Revoke mmaps and prevent access to fence registers across reset")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190212130831.14425-1-chris@chris-wilson.co.uk
2019-02-12 16:41:34 +00:00
Jani Nikula 16eb0f34cd drm/i915/opregion: rvda is relative from opregion base in opregion 2.1+
Starting from opregion version 2.1 (roughly corresponding to ICL+) the
RVDA field is relative from the beginning of opregion, not absolute
address.

Fix the error path while at it.

v2: Make relative vs. absolute conditional on the opregion version,
    bumped for the purpose. Turned out there are machines relying on
    absolute RVDA in the wild.

v3: Fix the version checks

Fixes: 04ebaadb9f ("drm/i915/opregion: handle VBT sizes bigger than 6 KB")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208184254.24123-2-jani.nikula@intel.com
(cherry picked from commit a0f52c3d35)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2019-02-12 15:37:58 +02:00
Jani Nikula fc89a38d99 drm/i915/opregion: fix version check
The u32 version field encodes major, minor, revision and reserved. We've
basically been checking for any non-zero version.

Add opregion version logging while at it.

v2: Fix the fix of the version check

Fixes: 04ebaadb9f ("drm/i915/opregion: handle VBT sizes bigger than 6 KB")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208184254.24123-1-jani.nikula@intel.com
(cherry picked from commit 98fdaaca95)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2019-02-12 15:37:51 +02:00
Joonas Lahtinen 2e7bd10e05 drm/i915: Prevent a race during I915_GEM_MMAP ioctl with WC set
Make sure the underlying VMA in the process address space is the
same as it was during vm_mmap to avoid applying WC to wrong VMA.

A more long-term solution would be to have vm_mmap_locked variant
in linux/mmap.h for when caller wants to hold mmap_sem for an
extended duration.

v2:
- Refactor the compare function

Fixes: 1816f92363 ("drm/i915: Support creation of unbound wc user mappings for objects")
Reported-by: Adam Zabrocki <adamza@microsoft.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.0+
Cc: Akash Goel <akash.goel@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Adam Zabrocki <adamza@microsoft.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20190207085454.10598-1-joonas.lahtinen@linux.intel.com
(cherry picked from commit 5c4604e757)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2019-02-12 15:37:40 +02:00
Lyude Paul e8a8fedd57 drm/i915: Block fbdev HPD processing during suspend
When resuming, we check whether or not any previously connected
MST topologies are still present and if so, attempt to resume them. If
this fails, we disable said MST topologies and fire off a hotplug event
so that userspace knows to reprobe.

However, sending a hotplug event involves calling
drm_fb_helper_hotplug_event(), which in turn results in fbcon doing a
connector reprobe in the caller's thread - something we can't do at the
point in which i915 calls drm_dp_mst_topology_mgr_resume() since
hotplugging hasn't been fully initialized yet.

This currently causes some rather subtle but fatal issues. For example,
on my T480s the laptop dock connected to it usually disappears during a
suspend cycle, and comes back up a short while after the system has been
resumed. This guarantees pretty much every suspend and resume cycle,
drm_dp_mst_topology_mgr_set_mst(mgr, false); will be caused and in turn,
a connector hotplug will occur. Now it's Rute Goldberg time: when the
connector hotplug occurs, i915 reprobes /all/ of the connectors,
including eDP. However, eDP probing requires that we power on the panel
VDD which in turn, grabs a wakeref to the appropriate power domain on
the GPU (on my T480s, this is the PORT_DDI_A_IO domain). This is where
things start breaking, since this all happens before
intel_power_domains_enable() is called we end up leaking the wakeref
that was acquired and never releasing it later. Come next suspend/resume
cycle, this causes us to fail to shut down the GPU properly, which
causes it not to resume properly and die a horrible complicated death.

(as a note: this only happens when there's both an eDP panel and MST
topology connected which is removed mid-suspend. One or the other seems
to always be OK).

We could try to fix the VDD wakeref leak, but this doesn't seem like
it's worth it at all since we aren't able to handle hotplug detection
while resuming anyway. So, let's go with a more robust solution inspired
by nouveau: block fbdev from handling hotplug events until we resume
fbdev. This allows us to still send sysfs hotplug events to be handled
later by user space while we're resuming, while also preventing us from
actually processing any hotplug events we receive until it's safe.

This fixes the wakeref leak observed on the T480s and as such, also
fixes suspend/resume with MST topologies connected on this machine.

Changes since v2:
* Don't call drm_fb_helper_hotplug_event() under lock, do it after lock
  (Chris Wilson)
* Don't call drm_fb_helper_hotplug_event() in
  intel_fbdev_output_poll_changed() under lock (Chris Wilson)
* Always set ifbdev->hpd_waiting (Chris Wilson)

Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 0e32b39cee ("drm/i915: add DP 1.2 MST support (v0.7)")
Cc: Todd Previte <tprevite@gmail.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v3.17+
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129191001.442-2-lyude@redhat.com
(cherry picked from commit fe5ec65668)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2019-02-12 15:37:32 +02:00
Tvrtko Ursulin d8b879bb2e drm/i915/pmu: Fix enable count array size and bounds checking
Enable count array is supposed to have one counter for each possible
engine sampler. As such, array sizing and bounds checking is not correct
and would blow up the asserts if more samplers were added.

No ill-effect in the current code base but lets fix it for correctness.

At the same time tidy the assert for readability and robustness.

v2:
 * One check per assert. (Chris Wilson)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: b46a33e271 ("drm/i915/pmu: Expose a PMU interface for perf queries")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205130353.21105-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit 26a11deea6)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2019-02-12 15:37:24 +02:00
Ville Syrjälä ab98e94435 drm/i915: Dump skl+ watermark changes
Currently we're only dumping out the ddb allocation changes, let's do
the same for the watermarks. This should help with debugging underruns
and whatnot.

First I tried one line per plane per wm level, but that resulted in
an obnoxious amount of lines printed. So as a compromise I settled
on a four line format, each line containing a single watermark related
value (enable,lines,blocks,min_ddb_alloc) for all 8 levels (+trans wm).
It still produces quite a lot of output but I can't really see a way
around that because we simply have a lot of data to dump.

Let's also pimp the ddb debug to print the size of the allocations
too, not just their bounds. Makes it a bit easier to compare against
the watermarks.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208200527.12844-1-ville.syrjala@linux.intel.com
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
2019-02-12 14:36:45 +02:00
Chris Wilson ed7dc67774 drm/i915: Reacquire priolist cache after dropping the engine lock
If we drop the engine lock, we may run execlists_dequeue which may free
the priolist. Therefore if we ever drop the execution lock on the
engine, we have to discard our cache and refetch the priolist to ensure
we do not use a stale pointer.

[  506.418935] [IGT] gem_exec_whisper: starting subtest contexts-priority
[  593.240825] general protection fault: 0000 [#1] SMP
[  593.240863] CPU: 1 PID: 494 Comm: gem_exec_whispe Tainted: G     U            5.0.0-rc6+ #100
[  593.240879] Hardware name:  /NUC6CAYB, BIOS AYAPLCEL.86A.0029.2016.1124.1625 11/24/2016
[  593.240965] RIP: 0010:__i915_schedule+0x1fe/0x320 [i915]
[  593.240981] Code: 48 8b 0c 24 48 89 c3 49 8b 45 28 49 8b 75 20 4c 89 3c 24 48 89 46 08 48 89 30 48 8b 43 08 48 89 4b 08 49 89 5d 20 49 89 45 28 <48> 89 08 45 39 a7 b8 03 00 00 7d 44 45 89 a7 b8 03 00 00 49 8b 85
[  593.240999] RSP: 0018:ffffc90000057a60 EFLAGS: 00010046
[  593.241013] RAX: 6b6b6b6b6b6b6b6b RBX: ffff8882582d7870 RCX: ffff88826baba6f0
[  593.241026] RDX: 0000000000000000 RSI: ffff8882582d6e70 RDI: ffff888273482194
[  593.241049] RBP: ffffc90000057a68 R08: ffff8882582d7680 R09: ffff8882582d7840
[  593.241068] R10: 0000000000000000 R11: ffffea00095ebe08 R12: 0000000000000728
[  593.241105] R13: ffff88826baba6d0 R14: ffffc90000057a40 R15: ffff888273482158
[  593.241120] FS:  00007f4613fb3900(0000) GS:ffff888277a80000(0000) knlGS:0000000000000000
[  593.241133] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  593.241146] CR2: 00007f57d3c66a84 CR3: 000000026e2b6000 CR4: 00000000001406e0
[  593.241158] Call Trace:
[  593.241233]  i915_schedule+0x1f/0x30 [i915]
[  593.241326]  i915_request_add+0x1a9/0x290 [i915]
[  593.241393]  i915_gem_do_execbuffer+0x45f/0x1150 [i915]
[  593.241411]  ? init_object+0x49/0x80
[  593.241425]  ? ___slab_alloc.constprop.91+0x4b8/0x4e0
[  593.241491]  ? i915_gem_execbuffer2_ioctl+0x99/0x380 [i915]
[  593.241563]  ? i915_gem_execbuffer_ioctl+0x270/0x270 [i915]
[  593.241629]  i915_gem_execbuffer2_ioctl+0x1bb/0x380 [i915]
[  593.241705]  ? i915_gem_execbuffer_ioctl+0x270/0x270 [i915]
[  593.241724]  drm_ioctl_kernel+0x81/0xd0
[  593.241738]  drm_ioctl+0x1a7/0x310
[  593.241803]  ? i915_gem_execbuffer_ioctl+0x270/0x270 [i915]
[  593.241819]  ? __update_load_avg_se+0x1c9/0x240
[  593.241834]  ? pick_next_entity+0x7e/0x120
[  593.241851]  do_vfs_ioctl+0x88/0x5d0
[  593.241880]  ksys_ioctl+0x35/0x70
[  593.241894]  __x64_sys_ioctl+0x11/0x20
[  593.241907]  do_syscall_64+0x44/0xf0
[  593.241924]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  593.241940] RIP: 0033:0x7f4615ffe757
[  593.241952] Code: 00 00 90 48 8b 05 39 a7 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 09 a7 0c 00 f7 d8 64 89 01 48
[  593.241970] RSP: 002b:00007ffc1030ddf8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[  593.241984] RAX: ffffffffffffffda RBX: 00007ffc10324420 RCX: 00007f4615ffe757
[  593.241997] RDX: 00007ffc1030e220 RSI: 0000000040406469 RDI: 0000000000000003
[  593.242010] RBP: 00007ffc1030e220 R08: 00007f46160c9208 R09: 00007f46160c9240
[  593.242022] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000040406469
[  593.242038] R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000
[  593.242058] Modules linked in: i915 intel_gtt drm_kms_helper prime_numbers

v2: Track the local engine cache and explicitly clear it when switching
engine locks.

Fixes: a02eb975be ("drm/i915/execlists: Cache the priolist when rescheduling")
Testcase: igt/gem_exec_whisper/contexts-priority # rare!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190211204647.26723-1-chris@chris-wilson.co.uk
2019-02-11 22:12:21 +00:00
Chris Wilson ed06fddc22 drm/i915: Include the current timeline seqno for debugging execlists
While this is mainly only useful for ELSP[0], it is definitely useful to
know the current timeline seqno wrt to the queued set of requests for
that port, as this carries additional information above and beyond the
near-defunct global_seqno and global HWSP.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190211131004.11634-1-chris@chris-wilson.co.uk
2019-02-11 20:46:24 +00:00
Chris Wilson 7c95c10ee9 drm/i915: Use synchronize_srcu_expedited() for resets
We impose upon ourselves a strict timeout for resets (to ensure forward
progress by use of a failsafe). Prefer to use the expedited
synchronisation function in this case to reduce the likelihood of a
spurious delay being treated as a deadlock.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190211135040.1234-2-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
2019-02-11 20:46:30 +00:00