A warning can be triggered when hotplug CPU 0.
$ echo 0 > /sys/devices/system/cpu/cpu0/online
------------[ cut here ]------------
Voluntary context switch within RCU read-side critical section!
WARNING: CPU: 0 PID: 19 at kernel/rcu/tree_plugin.h:318
rcu_note_context_switch+0x4f4/0x580
RIP: 0010:rcu_note_context_switch+0x4f4/0x580
Call Trace:
<TASK>
? perf_event_update_userpage+0x104/0x150
__schedule+0x8d/0x960
? perf_event_set_state.part.82+0x11/0x50
schedule+0x44/0xb0
schedule_timeout+0x226/0x310
? __perf_event_disable+0x64/0x1a0
? _raw_spin_unlock+0x14/0x30
wait_for_completion+0x94/0x130
__wait_rcu_gp+0x108/0x130
synchronize_rcu+0x67/0x70
? invoke_rcu_core+0xb0/0xb0
? __bpf_trace_rcu_stall_warning+0x10/0x10
perf_pmu_migrate_context+0x121/0x370
iommu_pmu_cpu_offline+0x6a/0xa0
? iommu_pmu_del+0x1e0/0x1e0
cpuhp_invoke_callback+0x129/0x510
cpuhp_thread_fun+0x94/0x150
smpboot_thread_fn+0x183/0x220
? sort_range+0x20/0x20
kthread+0xe6/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
</TASK>
---[ end trace 0000000000000000 ]---
The synchronize_rcu() will be invoked in the perf_pmu_migrate_context(),
when migrating a PMU to a new CPU. However, the current for_each_iommu()
is within RCU read-side critical section.
Two methods were considered to fix the issue.
- Use the dmar_global_lock to replace the RCU read lock when going
through the drhd list. But it triggers a lockdep warning.
- Use the cpuhp_setup_state_multi() to set up a dedicated state for each
IOMMU PMU. The lock can be avoided.
The latter method is implemented in this patch. Since each IOMMU PMU has
a dedicated state, add cpuhp_node and cpu in struct iommu_pmu to track
the state. The state can be dynamically allocated now. Remove the
CPUHP_AP_PERF_X86_IOMMU_PERF_ONLINE.
Fixes: 46284c6ceb ("iommu/vt-d: Support cpumask for IOMMU perfmon")
Reported-by: Ammy Yi <ammy.yi@intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20230328182028.1366416-1-kan.liang@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20230329134721.469447-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The VT-d spec states (in section 11.4.2) that hardware implementations
reporting second-stage translation support (SSTS) field as Clear also
report the SAGAW field as 0. Fix an inappropriate check in alloc_iommu().
Fixes: 792fb43ce2 ("iommu/vt-d: Enable Intel IOMMU scalable mode by default")
Suggested-by: Raghunathan Srinivasan <raghunathan.srinivasan@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20230318024824.124542-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20230329134721.469447-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The global rwsem dmar_global_lock was introduced by commit 3a5670e8ac
("iommu/vt-d: Introduce a rwsem to protect global data structures"). It
is used to protect DMAR related global data from DMAR hotplug operations.
Using dmar_global_lock in intel_irq_remapping_alloc() is unnecessary as
the DMAR global data structures are not touched there. Remove it to avoid
below lockdep warning.
======================================================
WARNING: possible circular locking dependency detected
6.3.0-rc2 #468 Not tainted
------------------------------------------------------
swapper/0/1 is trying to acquire lock:
ff1db4cb40178698 (&domain->mutex){+.+.}-{3:3},
at: __irq_domain_alloc_irqs+0x3b/0xa0
but task is already holding lock:
ffffffffa0c1cdf0 (dmar_global_lock){++++}-{3:3},
at: intel_iommu_init+0x58e/0x880
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (dmar_global_lock){++++}-{3:3}:
lock_acquire+0xd6/0x320
down_read+0x42/0x180
intel_irq_remapping_alloc+0xad/0x750
mp_irqdomain_alloc+0xb8/0x2b0
irq_domain_alloc_irqs_locked+0x12f/0x2d0
__irq_domain_alloc_irqs+0x56/0xa0
alloc_isa_irq_from_domain.isra.7+0xa0/0xe0
mp_map_pin_to_irq+0x1dc/0x330
setup_IO_APIC+0x128/0x210
apic_intr_mode_init+0x67/0x110
x86_late_time_init+0x24/0x40
start_kernel+0x41e/0x7e0
secondary_startup_64_no_verify+0xe0/0xeb
-> #0 (&domain->mutex){+.+.}-{3:3}:
check_prevs_add+0x160/0xef0
__lock_acquire+0x147d/0x1950
lock_acquire+0xd6/0x320
__mutex_lock+0x9c/0xfc0
__irq_domain_alloc_irqs+0x3b/0xa0
dmar_alloc_hwirq+0x9e/0x120
iommu_pmu_register+0x11d/0x200
intel_iommu_init+0x5de/0x880
pci_iommu_init+0x12/0x40
do_one_initcall+0x65/0x350
kernel_init_freeable+0x3ca/0x610
kernel_init+0x1a/0x140
ret_from_fork+0x29/0x50
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(dmar_global_lock);
lock(&domain->mutex);
lock(dmar_global_lock);
lock(&domain->mutex);
*** DEADLOCK ***
Fixes: 9dbb8e3452 ("irqdomain: Switch to per-domain locking")
Reviewed-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Tested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20230314051836.23817-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20230329134721.469447-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
There are some subtle differences between release_device() and
set_platform_dma_ops() callbacks, so separate those two callbacks. Device
links should be removed only in release_device(), because they were
created in probe_device() on purpose and they are needed for proper
Exynos IOMMU driver operation. While fixing this, remove the conditional
code as it is not really needed.
Reported-by: Jason Gunthorpe <jgg@ziepe.ca>
Fixes: 189d496b48 ("iommu/exynos: Add missing set_platform_dma_ops callback")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20230315232514.1046589-1-m.szyprowski@samsung.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv
-----BEGIN PGP SIGNATURE-----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=p6Xp
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv"
* tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
power: supply: Introduce Qualcomm PMIC GLINK power supply
soc: apple: rtkit: Do not copy the reg state structure to the stack
soc: sunxi: SUN20I_PPU should depend on PM
memory: renesas-rpc-if: Remove redundant division of dummy
soc: qcom: socinfo: Add IDs for IPQ5332 and its variant
dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant
dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/
MAINTAINERS: Update qcom CPR maintainer entry
dt-bindings: firmware: document Qualcomm SM8550 SCM
dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible
soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants
dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants
soc: qcom: socinfo: Add support for new field in revision 17
soc: qcom: smd-rpm: Add IPQ9574 compatible
soc: qcom: pmic_glink: remove redundant calculation of svid
soc: qcom: stats: Populate all subsystem debugfs files
dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes
soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies
soc: qcom: pmic_glink: Introduce altmode support
...
Some polishing and small fixes for iommufd:
- Remove IOMMU_CAP_INTR_REMAP, instead rely on the interrupt subsystem
- Use GFP_KERNEL_ACCOUNT inside the iommu_domains
- Support VFIO_NOIOMMU mode with iommufd
- Various typos
- A list corruption bug if HWPTs are used for attach
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCY/TgzQAKCRCFwuHvBreF
Ya3AAP4/WxTJIbDvtTyH3Fae3NxTdO8j8gsUvU1vrRYG83zdnAEAxd1yii7GEO8D
crkeq9D4FUiPAkFnJ64Exw2FHb060Qg=
=RABK
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"Some polishing and small fixes for iommufd:
- Remove IOMMU_CAP_INTR_REMAP, instead rely on the interrupt
subsystem
- Use GFP_KERNEL_ACCOUNT inside the iommu_domains
- Support VFIO_NOIOMMU mode with iommufd
- Various typos
- A list corruption bug if HWPTs are used for attach"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Do not add the same hwpt to the ioas->hwpt_list twice
iommufd: Make sure to zero vfio_iommu_type1_info before copying to user
vfio: Support VFIO_NOIOMMU with iommufd
iommufd: Add three missing structures in ucmd_buffer
selftests: iommu: Fix test_cmd_destroy_access() call in user_copy
iommu: Remove IOMMU_CAP_INTR_REMAP
irq/s390: Add arch_is_isolated_msi() for s390
iommu/x86: Replace IOMMU_CAP_INTR_REMAP with IRQ_DOMAIN_FLAG_ISOLATED_MSI
genirq/msi: Rename IRQ_DOMAIN_MSI_REMAP to IRQ_DOMAIN_ISOLATED_MSI
genirq/irqdomain: Remove unused irq_domain_check_msi_remap() code
iommufd: Convert to msi_device_has_isolated_msi()
vfio/type1: Convert to iommu_group_has_isolated_msi()
iommu: Add iommu_group_has_isolated_msi()
genirq/msi: Add msi_device_has_isolated_msi()
Including:
- Consolidate iommu_map/unmap functions. There have been
blocking and atomic variants so far, but that was problematic
as this approach does not scale with required new variants
which just differ in the GFP flags used.
So Jason consolidated this back into single functions that
take a GFP parameter. This has the potential to cause
conflicts with other trees, as they introduce new call-sites
for the changed functions. I offered them to pull in the
branch containing these changes and resolve it, but I am not
sure everyone did that. The conflicts this caused with
upstream up to v6.2-rc8 are resolved in the final merge
commit.
- Retire the detach_dev() call-back in iommu_ops
- Arm SMMU updates from Will:
- Device-tree binding updates:
* Cater for three power domains on SM6375
* Document existing compatible strings for Qualcomm SoCs
* Tighten up clocks description for platform-specific compatible strings
- Enable Qualcomm workarounds for some additional platforms that need them
- Intel VT-d updates from Lu Baolu:
- Add Intel IOMMU performance monitoring support
- Set No Execute Enable bit in PASID table entry
- Two performance optimizations
- Fix PASID directory pointer coherency
- Fix missed rollbacks in error path
- Cleanups
- Apple t8110 DART support
- Exynos IOMMU:
- Implement better fault handling
- Error handling fixes
- Renesas IPMMU:
- Add device tree bindings for r8a779g0
- AMD IOMMU:
- Various fixes for handling on SNP-enabled systems and
handling of faults with unknown request-ids
- Cleanups and other small fixes
- Various other smaller fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=ZaZV
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Consolidate iommu_map/unmap functions.
There have been blocking and atomic variants so far, but that was
problematic as this approach does not scale with required new
variants which just differ in the GFP flags used. So Jason
consolidated this back into single functions that take a GFP
parameter.
- Retire the detach_dev() call-back in iommu_ops
- Arm SMMU updates from Will:
- Device-tree binding updates:
- Cater for three power domains on SM6375
- Document existing compatible strings for Qualcomm SoCs
- Tighten up clocks description for platform-specific
compatible strings
- Enable Qualcomm workarounds for some additional platforms that
need them
- Intel VT-d updates from Lu Baolu:
- Add Intel IOMMU performance monitoring support
- Set No Execute Enable bit in PASID table entry
- Two performance optimizations
- Fix PASID directory pointer coherency
- Fix missed rollbacks in error path
- Cleanups
- Apple t8110 DART support
- Exynos IOMMU:
- Implement better fault handling
- Error handling fixes
- Renesas IPMMU:
- Add device tree bindings for r8a779g0
- AMD IOMMU:
- Various fixes for handling on SNP-enabled systems and
handling of faults with unknown request-ids
- Cleanups and other small fixes
- Various other smaller fixes and cleanups
* tag 'iommu-updates-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (71 commits)
iommu/amd: Skip attach device domain is same as new domain
iommu: Attach device group to old domain in error path
iommu/vt-d: Allow to use flush-queue when first level is default
iommu/vt-d: Fix PASID directory pointer coherency
iommu/vt-d: Avoid superfluous IOTLB tracking in lazy mode
iommu/vt-d: Fix error handling in sva enable/disable paths
iommu/amd: Improve page fault error reporting
iommu/amd: Do not identity map v2 capable device when snp is enabled
iommu: Fix error unwind in iommu_group_alloc()
iommu/of: mark an unused function as __maybe_unused
iommu: dart: DART_T8110_ERROR range should be 0 to 5
iommu/vt-d: Enable IOMMU perfmon support
iommu/vt-d: Add IOMMU perfmon overflow handler support
iommu/vt-d: Support cpumask for IOMMU perfmon
iommu/vt-d: Add IOMMU perfmon support
iommu/vt-d: Support Enhanced Command Interface
iommu/vt-d: Retrieve IOMMU perfmon capability information
iommu/vt-d: Support size of the register set in DRHD
iommu/vt-d: Set No Execute Enable bit in PASID table entry
iommu/vt-d: Remove sva from intel_svm_dev
...
iommu_attach_group() attaches all devices in a group to domain and then
sets group domain (group->domain). Current code (__iommu_attach_group())
does not handle error path. This creates problem as devices to domain
attachment is in inconsistent state.
Flow:
- During boot iommu attach devices to default domain
- Later some device driver (like amd/iommu_v2 or vfio) tries to attach
device to new domain.
- In iommu_attach_group() path we detach device from current domain.
Then it tries to attach devices to new domain.
- If it fails to attach device to new domain then device to domain link
is broken.
- iommu_attach_group() returns error.
- At this stage iommu_attach_group() caller thinks, attaching device to
new domain failed and devices are still attached to old domain.
- But in reality device to old domain link is broken. It will result
in all sort of failures (like IO page fault) later.
To recover from this situation, we need to attach all devices back to the
old domain. Also log warning if it fails attach device back to old domain.
Suggested-by: Lu Baolu <baolu.lu@linux.intel.com>
Reported-by: Matt Fagnani <matt.fagnani@bell.net>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Matt Fagnani <matt.fagnani@bell.net>
Link: https://lore.kernel.org/r/20230215052642.6016-1-vasant.hegde@amd.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216865
Link: https://lore.kernel.org/lkml/15d0f9ff-2a56-b3e9-5b45-e6b23300ae3b@leemhuis.info/
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit 29b3283972 ("iommu/vt-d: Do not use flush-queue when caching-mode
is on") forced default domains to be strict mode as long as IOMMU
caching-mode is flagged. The reason for doing this is that when vIOMMU
uses VT-d caching mode to synchronize shadowing page tables, the strict
mode shows better performance.
However, this optimization is orthogonal to the first-level page table
because the Intel VT-d architecture does not define the caching mode of
the first-level page table. Refer to VT-d spec, section 6.1, "When the
CM field is reported as Set, any software updates to remapping
structures other than first-stage mapping (including updates to not-
present entries or present entries whose programming resulted in
translation faults) requires explicit invalidation of the caches."
Exclude the first-level page table from this optimization.
Generally using first-stage translation in vIOMMU implies nested
translation enabled in the physical IOMMU. In this case the first-stage
page table is wholly captured by the guest. The vIOMMU only needs to
transfer the cache invalidations on vIOMMU to the physical IOMMU.
Forcing the default domain to strict mode will cause more frequent
cache invalidations, resulting in performance degradation. In a real
performance benchmark test measured by iperf receive, the performance
result on Sapphire Rapids 100Gb NIC shows:
w/ this fix ~51 Gbits/s, w/o this fix ~39.3 Gbits/s.
Theoretically a first-stage IOMMU page table can still be shadowed
in absence of the caching mode, e.g. with host write-protecting guest
IOMMU page table to synchronize changed PTEs with the physical
IOMMU page table. In this case the shadowing overhead is decoupled
from emulating IOTLB invalidation then the overhead of the latter part
is solely decided by the frequency of IOTLB invalidations. Hence
allowing guest default dma domain to be lazy can also benefit the
overall performance by reducing the total VM-exit numbers.
Fixes: 29b3283972 ("iommu/vt-d: Do not use flush-queue when caching-mode is on")
Reported-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Suggested-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20230214025618.2292889-1-tina.zhang@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
On platforms that do not support IOMMU Extended capability bit 0
Page-walk Coherency, CPU caches are not snooped when IOMMU is accessing
any translation structures. IOMMU access goes only directly to
memory. Intel IOMMU code was missing a flush for the PASID table
directory that resulted in the unrecoverable fault as shown below.
This patch adds clflush calls whenever allocating and updating
a PASID table directory to ensure cache coherency.
On the reverse direction, there's no need to clflush the PASID directory
pointer when we deactivate a context entry in that IOMMU hardware will
not see the old PASID directory pointer after we clear the context entry.
PASID directory entries are also never freed once allocated.
DMAR: DRHD: handling fault status reg 3
DMAR: [DMA Read NO_PASID] Request device [00:0d.2] fault addr 0x1026a4000
[fault reason 0x51] SM: Present bit in Directory Entry is clear
DMAR: Dump dmar1 table entries for IOVA 0x1026a4000
DMAR: scalable mode root entry: hi 0x0000000102448001, low 0x0000000101b3e001
DMAR: context entry: hi 0x0000000000000000, low 0x0000000101b4d401
DMAR: pasid dir entry: 0x0000000101b4e001
DMAR: pasid table entry[0]: 0x0000000000000109
DMAR: pasid table entry[1]: 0x0000000000000001
DMAR: pasid table entry[2]: 0x0000000000000000
DMAR: pasid table entry[3]: 0x0000000000000000
DMAR: pasid table entry[4]: 0x0000000000000000
DMAR: pasid table entry[5]: 0x0000000000000000
DMAR: pasid table entry[6]: 0x0000000000000000
DMAR: pasid table entry[7]: 0x0000000000000000
DMAR: PTE not present at level 4
Cc: <stable@vger.kernel.org>
Fixes: 0bbeb01a4f ("iommu/vt-d: Manage scalalble mode PASID tables")
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reported-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Link: https://lore.kernel.org/r/20230209212843.1788125-1-jacob.jun.pan@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Intel IOMMU driver implements IOTLB flush queue with domain selective
or PASID selective invalidations. In this case there's no need to track
IOVA page range and sync IOTLBs, which may cause significant performance
hit.
This patch adds a check to avoid IOVA gather page and IOTLB sync for
the lazy path.
The performance difference on Sapphire Rapids 100Gb NIC is improved by
the following (as measured by iperf send):
w/o this fix~48 Gbits/s. with this fix ~54 Gbits/s
Cc: <stable@vger.kernel.org>
Fixes: 2a2b8eaa5b ("iommu: Handle freelists when using deferred flushing in iommu drivers")
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Link: https://lore.kernel.org/r/20230209175330.1783556-1-jacob.jun.pan@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Roll back all previous actions in error paths of intel_iommu_enable_sva()
and intel_iommu_disable_sva().
Fixes: d5b9e4bfe0 ("iommu/vt-d: Report prq to io-pgfault framework")
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20230208051559.700109-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Flow:
- Booted system with SNP enabled, memory encryption off and
IOMMU DMA translation mode
- AMD driver detects v2 capable device and amd_iommu_def_domain_type()
returns identity mode
- amd_iommu_domain_alloc() returns NULL an SNP is enabled
- System will fail to register device
On SNP enabled system, passthrough mode is not supported. IOMMU default
domain is set to translation mode. We need to return zero from
amd_iommu_def_domain_type() so that it allocates translation domain.
Fixes: fb2accadaa ("iommu/amd: Introduce function to check and enable SNP")
CC: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20230207091752.7656-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
If either iommu_group_grate_file() fails then the
iommu_group is leaked.
Destroy it on these error paths.
Found by kselftest/iommu/iommufd_fail_nth
Fixes: bc7d12b91b ("iommu: Implement reserved_regions iommu-group sysfs file")
Fixes: c52c72d3de ("iommu: Add sysfs attribyte for domain type")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/0-v1-8f616bee028d+8b-iommu_group_alloc_leak_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When CONFIG_OF_ADDRESS is not set, there is a build warning/error
about an unused function.
Annotate the function to quieten the warning/error.
../drivers/iommu/of_iommu.c:176:29: warning: 'iommu_resv_region_get_type' defined but not used [-Wunused-function]
176 | static enum iommu_resv_type iommu_resv_region_get_type(struct device *dev, struct resource *phys,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: a5bf3cfce8 ("iommu: Implement of_iommu_get_resv_regions()")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Will Deacon <will@kernel.org>
Cc: iommu@lists.linux.dev
Reviewed-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20230209010359.23831-1-rdunlap@infradead.org
[joro: Improve code formatting]
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The hwpt is added to the hwpt_list only during its creation, it is never
added again. This hunk is some missed leftover from rework. Adding it
twice will corrupt the linked list in some cases.
It effects HWPT specific attachment, which is something the test suite
cannot cover until we can create a legitimate struct device with a
non-system iommu "driver" (ie we need the bus removed from the iommu code)
Cc: stable@vger.kernel.org
Fixes: e8d5721003 ("iommufd: Add kAPI toward external drivers for physical devices")
Link: https://lore.kernel.org/r/1-v1-4336b5cb2fe4+1d7-iommufd_hwpt_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reported-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Move include/linux/qcom_scm.h to include/linux/firmware/qcom/qcom_scm.h.
This removes 1 of a few remaining Qualcomm-specific headers into a more
approciate subdirectory under include/.
Suggested-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
Reviewed-by: Guru Das Srinagesh <quic_gurus@quicinc.com>
Acked-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230203210956.3580811-1-quic_eberman@quicinc.com
Add a small amount of emulation to vfio_compat to accept the SET_IOMMU to
VFIO_NOIOMMU_IOMMU and have vfio just ignore iommufd if it is working on a
no-iommu enabled device.
Move the enable_unsafe_noiommu_mode module out of container.c into
vfio_main.c so that it is always available even if VFIO_CONTAINER=n.
This passes Alex's mini-test:
https://github.com/awilliam/tests/blob/master/vfio-noiommu-pci-device-open.c
Link: https://lore.kernel.org/r/0-v3-480cd64a16f7+1ad0-iommufd_noiommu_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This was detected by smatch as one "else if" statement could never be
reached. Confirmed bit order by comparing with python implementation [1].
drivers/iommu/apple-dart.c:991 apple_dart_t8110_irq()
warn: duplicate check 'error_code == ((((1))) << (3))'
(previous on line 989)
Link: https://github.com/AsahiLinux/m1n1/commit/96b2d584feec1e3f7bfa [1]
Fixes: d8bcc870d9 ("iommu: dart: Add t8110 DART support")
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20230201124257.7801-1-ecurtin@redhat.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Register and enable an IOMMU perfmon for each active IOMMU device.
The failure of IOMMU perfmon registration doesn't impact other
functionalities of an IOMMU device.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20230128200428.1459118-8-kan.liang@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
While enabled to count events and an event occurrence causes the counter
value to increment and roll over to or past zero, this is termed a
counter overflow. The overflow can trigger an interrupt. The IOMMU
perfmon needs to handle the case properly.
New HW IRQs are allocated for each IOMMU device for perfmon. The IRQ IDs
are after the SVM range.
In the overflow handler, the counter is not frozen. It's very unlikely
that the same counter overflows again during the period. But it's
possible that other counters overflow at the same time. Read the
overflow register at the end of the handler and check whether there are
more.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20230128200428.1459118-7-kan.liang@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The perf subsystem assumes that all counters are by default per-CPU. So
the user space tool reads a counter from each CPU. However, the IOMMU
counters are system-wide and can be read from any CPU. Here we use a CPU
mask to restrict counting to one CPU to handle the issue. (with CPU
hotplug notifier to choose a different CPU if the chosen one is taken
off-line).
The CPU is exposed to /sys/bus/event_source/devices/dmar*/cpumask for
the user space perf tool.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20230128200428.1459118-6-kan.liang@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Implement the IOMMU performance monitor capability, which supports the
collection of information about key events occurring during operation of
the remapping hardware, to aid performance tuning and debug.
The IOMMU perfmon support is implemented as part of the IOMMU driver and
interfaces with the Linux perf subsystem.
The IOMMU PMU has the following unique features compared with the other
PMUs.
- Support counting. Not support sampling.
- Does not support per-thread counting. The scope is system-wide.
- Support per-counter capability register. The event constraints can be
enumerated.
- The available event and event group can also be enumerated.
- Extra Enhanced Commands are introduced to control the counters.
Add a new variable, struct iommu_pmu *pmu, to in the struct intel_iommu
to track the PMU related information.
Add iommu_pmu_register() and iommu_pmu_unregister() to register and
unregister a IOMMU PMU. The register function setup the IOMMU PMU ops
and invoke the standard perf_pmu_register() interface to register a PMU
in the perf subsystem. This patch only exposes the functions. The
following patch will enable them in the IOMMU driver.
The IOMMU PMUs can be found under /sys/bus/event_source/devices/dmar*
The available filters and event format can be found at the format folder
$ ls /sys/bus/event_source/devices/dmar1/format/
event event_group filter_ats filter_ats_en filter_page_table
filter_page_table_en
The supported events can be found at the events folder
$ ls /sys/bus/event_source/devices/dmar1/events/
ats_blocked fs_nonleaf_hit int_cache_hit_posted
iommu_mem_blocked iotlb_hit pasid_cache_lookup ss_nonleaf_hit
ctxt_cache_hit fs_nonleaf_lookup int_cache_lookup
iommu_mrds iotlb_lookup pg_req_posted ss_nonleaf_lookup
ctxt_cache_lookup int_cache_hit_nonposted iommu_clocks
iommu_requests pasid_cache_hit pw_occupancy
The command below illustrates filter usage with a simple example.
$ perf stat -e dmar1/iommu_requests,filter_ats_en=0x1,filter_ats=0x1/
-a sleep 1
Performance counter stats for 'system wide':
368,947 dmar1/iommu_requests,filter_ats_en=0x1,filter_ats=0x1/
1.002592074 seconds time elapsed
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20230128200428.1459118-5-kan.liang@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Enhanced Command Register is to submit command and operand of
enhanced commands to DMA Remapping hardware. It can supports up to 256
enhanced commands.
There is a HW register to indicate the availability of all 256 enhanced
commands. Each bit stands for each command. But there isn't an existing
interface to read/write all 256 bits. Introduce the u64 ecmdcap[4] to
store the existence of each enhanced command. Read 4 times to get all of
them in map_iommu().
Add a helper to facilitate an enhanced command launch. Make sure hardware
complete the command. Also add a helper to facilitate the check of PMU
essentials. These helpers will be used later.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20230128200428.1459118-4-kan.liang@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The performance monitoring infrastructure, perfmon, is to support
collection of information about key events occurring during operation of
the remapping hardware, to aid performance tuning and debug. Each
remapping hardware unit has capability registers that indicate support
for performance monitoring features and enumerate the capabilities.
Add alloc_iommu_pmu() to retrieve IOMMU perfmon capability information
for each iommu unit. The information is stored in the iommu->pmu data
structure. Capability registers are read-only, so it's safe to prefetch
and store them in the pmu structure. This could avoid unnecessary VMEXIT
when this code is running in the virtualization environment.
Add free_iommu_pmu() to free the saved capability information when
freeing the iommu unit.
Add a kernel config option for the IOMMU perfmon feature. Unless a user
explicitly uses the perf tool to monitor the IOMMU perfmon event, there
isn't any impact for the existing IOMMU. Enable it by default.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20230128200428.1459118-3-kan.liang@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
A new field, which indicates the size of the remapping hardware register
set for this remapping unit, is introduced in the DMA-remapping hardware
unit definition (DRHD) structure with the VT-d Spec 4.0. With this
information, SW doesn't need to 'guess' the size of the register set
anymore.
Update the struct acpi_dmar_hardware_unit to reflect the field. Store the
size of the register set in struct dmar_drhd_unit for each dmar device.
The 'size' information is ResvZ for the old BIOS and platforms. Fall back
to the old guessing method. There is nothing changed.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20230128200428.1459118-2-kan.liang@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Setup No Execute Enable bit (Bit 133) of a scalable mode PASID entry.
This is to allow the use of XD bit of the first level page table.
Fixes: ddf09b6d43 ("iommu/vt-d: Setup pasid entries for iova over first level")
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20230126095438.354205-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
After commit be51b1d6bb ("iommu/sva: Refactoring
iommu_sva_bind/unbind_device()"), the iommu driver doesn't need to
return an iommu_sva pointer anymore. This removes the sva field
from intel_svm_dev and cleanups the code accordingly.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20230109014955.147068-5-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
It was used as a reference counter of an existing bond between device
and user application memory address. Commit be51b1d6bb ("iommu/sva:
Refactoring iommu_sva_bind/unbind_device()") has added this in iommu
core. Remove it to avoid duplicate code.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20230109014955.147068-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
There's no need to have a public header for Intel SVA implementation.
The device driver should interact with Intel SVA implementation via
the IOMMU generic APIs.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20230109014955.147068-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The 'acpiid' buffer in the parse_ivrs_acpihid function may overflow,
because the string specifier in the format string sscanf()
has no width limitation.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Fixes: ca3bf5d47c ("iommu/amd: Introduces ivrs_acpihid kernel parameter")
Cc: stable@vger.kernel.org
Signed-off-by: Ilia.Gavrilov <Ilia.Gavrilov@infotecs.ru>
Reviewed-by: Kim Phillips <kim.phillips@amd.com>
Link: https://lore.kernel.org/r/20230202082719.1513849-1-Ilia.Gavrilov@infotecs.ru
Signed-off-by: Joerg Roedel <jroedel@suse.de>
pci_device_group() can return an already existing IOMMU group if the PCI
device's pagetables have to be shared with another one due to bus
toplogy, isolation features and/or DMA alias quirks.
apple_dart_device_group() however assumes that the group has just been
created and overwrites its iommudata which will eventually lead to
apple_dart_release_group leaving stale entries in sid2group.
Fix that by merging the iommudata if the returned group already exists.
Fixes: f0b636804c ("iommu/dart: Clear sid2group entry when a group is freed")
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Link: https://lore.kernel.org/r/20230128113532.94651-1-sven@svenpeter.dev
Signed-off-by: Joerg Roedel <jroedel@suse.de>
__GFP_ATOMIC serves little purpose. Its main effect is to set
ALLOC_HARDER which adds a few little boosts to increase the chance of an
allocation succeeding, one of which is to lower the water-mark at which it
will succeed.
It is *always* paired with __GFP_HIGH which sets ALLOC_HIGH which also
adjusts this watermark. It is probable that other users of __GFP_HIGH
should benefit from the other little bonuses that __GFP_ATOMIC gets.
__GFP_ATOMIC also gives a warning if used with __GFP_DIRECT_RECLAIM.
There is little point to this. We already get a might_sleep() warning if
__GFP_DIRECT_RECLAIM is set.
__GFP_ATOMIC allows the "watermark_boost" to be side-stepped. It is
probable that testing ALLOC_HARDER is a better fit here.
__GFP_ATOMIC is used by tegra-smmu.c to check if the allocation might
sleep. This should test __GFP_DIRECT_RECLAIM instead.
This patch:
- removes __GFP_ATOMIC
- allows __GFP_HIGH allocations to ignore watermark boosting as well
as GFP_ATOMIC requests.
- makes other adjustments as suggested by the above.
The net result is not change to GFP_ATOMIC allocations. Other
allocations that use __GFP_HIGH will benefit from a few different extra
privileges. This affects:
xen, dm, md, ntfs3
the vermillion frame buffer
hibernation
ksm
swap
all of which likely produce more benefit than cost if these selected
allocation are more likely to succeed quickly.
[mgorman: Minor adjustments to rework on top of a series]
Link: https://lkml.kernel.org/r/163712397076.13692.4727608274002939094@noble.neil.brown.name
Link: https://lkml.kernel.org/r/20230113111217.14134-7-mgorman@techsingularity.net
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jason Gunthorpe says:
====================
iommufd follows the same design as KVM and uses memory cgroups to limit
the amount of kernel memory a iommufd file descriptor can pin down. The
various internal data structures already use GFP_KERNEL_ACCOUNT to charge
its own memory.
However, one of the biggest consumers of kernel memory is the IOPTEs
stored under the iommu_domain and these allocations are not tracked.
This series is the first step in fixing it.
The iommu driver contract already includes a 'gfp' argument to the
map_pages op, allowing iommufd to specify GFP_KERNEL_ACCOUNT and then
having the driver allocate the IOPTE tables with that flag will capture a
significant amount of the allocations.
Update the iommu_map() API to pass in the GFP argument, and fix all call
sites. Replace iommu_map_atomic().
Audit the "enterprise" iommu drivers to make sure they do the right thing.
Intel and S390 ignore the GFP argument and always use GFP_ATOMIC. This is
problematic for iommufd anyhow, so fix it. AMD and ARM SMMUv2/3 are
already correct.
A follow up series will be needed to capture the allocations made when the
iommu_domain itself is allocated, which will complete the job.
====================
* 'iommu-memory-accounting' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/s390: Use GFP_KERNEL in sleepable contexts
iommu/s390: Push the gfp parameter to the kmem_cache_alloc()'s
iommu/intel: Use GFP_KERNEL in sleepable contexts
iommu/intel: Support the gfp argument to the map_pages op
iommu/intel: Add a gfp parameter to alloc_pgtable_page()
iommufd: Use GFP_KERNEL_ACCOUNT for iommu_map()
iommu/dma: Use the gfp parameter in __iommu_dma_alloc_noncontiguous()
iommu: Add a gfp parameter to iommu_map_sg()
iommu: Remove iommu_map_atomic()
iommu: Add a gfp parameter to iommu_map()
Link: https://lore.kernel.org/linux-iommu/0-v3-76b587fe28df+6e3-iommu_map_gfp_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
SysMMU v7 has a bit different registers for getting the fault info:
- there is one single register (MMU_FAULT_VA) to get the fault address
- fault access type (R/W) can be read from MMU_FAULT_TRANS_INFO
register now
- interrupt status register has different bits w.r.t. previous SysMMU
versions
- VM and non-VM layouts have different register addresses
Add correct fault handling implementation for SysMMU v7, according to
all mentioned differences. Only VID #0 (default) is handled, as VM
domains support is not implemented yet.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20220726200739.30017-3-semen.protsenko@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Fault info obtaining is implemented for SysMMU v1..v5 in a very hardware
specific way, as it relies on:
- interrupt bits being tied to read or write access
- having separate registers for the fault address w.r.t. AR/AW ops
Newer SysMMU versions (like SysMMU v7) have different way of providing
the fault info via registers:
- the transaction type (read or write) should be read from the
register (instead of hard-coding it w.r.t. corresponding interrupt
status bit)
- there is only one single register for storing the fault address
Because of that, it is not possible to add newer SysMMU support into
existing paradigm. Also it's not very effective performance-wise:
- checking SysMMU version in ISR each time is not necessary
- performing linear search to find the fault info by interrupt bit can
be replaced with a single lookup operation
Pave the way for adding support for new SysMMU versions by abstracting
the getting of fault info in ISR. While at it, do some related style
cleanups as well.
This is mostly a refactoring patch, but there are some minor functional
changes:
- fault message format is a bit different; now instead of AR/AW
prefixes for the fault's name, the request direction is printed as
[READ]/[WRITE]. It has to be done to prepare an abstraction for
SysMMU v7 support
- don't panic on unknown interrupts; print corresponding message and
continue
- if fault wasn't recovered, panic with some sane message instead of
just doing BUG_ON()
The whole fault message looks like this now:
[READ] PAGE FAULT occurred at 0x12341000
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20220726200739.30017-2-semen.protsenko@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Merge patch-set from Jason:
"Let iommufd charge IOPTE allocations to the memory cgroup"
Description:
IOMMUFD follows the same design as KVM and uses memory cgroups to limit
the amount of kernel memory a iommufd file descriptor can pin down. The
various internal data structures already use GFP_KERNEL_ACCOUNT to charge
its own memory.
However, one of the biggest consumers of kernel memory is the IOPTEs
stored under the iommu_domain and these allocations are not tracked.
This series is the first step in fixing it.
The iommu driver contract already includes a 'gfp' argument to the
map_pages op, allowing iommufd to specify GFP_KERNEL_ACCOUNT and then
having the driver allocate the IOPTE tables with that flag will capture a
significant amount of the allocations.
Update the iommu_map() API to pass in the GFP argument, and fix all call
sites. Replace iommu_map_atomic().
Audit the "enterprise" iommu drivers to make sure they do the right thing.
Intel and S390 ignore the GFP argument and always use GFP_ATOMIC. This is
problematic for iommufd anyhow, so fix it. AMD and ARM SMMUv2/3 are
already correct.
A follow up series will be needed to capture the allocations made when the
iommu_domain itself is allocated, which will complete the job.
Link: https://lore.kernel.org/linux-iommu/0-v3-76b587fe28df+6e3-iommu_map_gfp_jgg@nvidia.com/
These contexts are sleepable, so use the proper annotation. The GFP_ATOMIC
was added mechanically in the prior patches.
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/10-v3-76b587fe28df+6e3-iommu_map_gfp_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
dma_alloc_cpu_table() and dma_alloc_page_table() are eventually called by
iommufd through s390_iommu_map_pages() and it should not be forced to
atomic. Thread the gfp parameter through the call chain starting from
s390_iommu_map_pages().
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/9-v3-76b587fe28df+6e3-iommu_map_gfp_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
These contexts are sleepable, so use the proper annotation. The GFP_ATOMIC
was added mechanically in the prior patches.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/8-v3-76b587fe28df+6e3-iommu_map_gfp_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Flow it down to alloc_pgtable_page() via pfn_to_dma_pte() and
__domain_mapping().
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/7-v3-76b587fe28df+6e3-iommu_map_gfp_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This is eventually called by iommufd through intel_iommu_map_pages() and
it should not be forced to atomic. Push the GFP_ATOMIC to all callers.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/6-v3-76b587fe28df+6e3-iommu_map_gfp_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Kan Liang