Commit 6a108a14fa ("kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT")
introduces CONFIG_EXPERT to carry the previous intent of CONFIG_EMBEDDED
and just gives that intent a much better name. That has been clearly a good
and long overdue renaming, and it is clearly an improvement to the kernel
build configuration that has shown to help managing the kernel build
configuration in the last decade.
However, rather than bravely and radically just deleting CONFIG_EMBEDDED,
this commit gives CONFIG_EMBEDDED a new intended semantics, but keeps it
open for future contributors to implement that intended semantics:
A new CONFIG_EMBEDDED option is added that automatically selects
CONFIG_EXPERT when enabled and can be used in the future to isolate
options that should only be considered for embedded systems (RISC
architectures, SLOB, etc).
Since then, this CONFIG_EMBEDDED implicitly had two purposes:
- It can make even more options visible beyond what CONFIG_EXPERT makes
visible. In other words, it may introduce another level of enabling the
visibility of configuration options: always visible, visible with
CONFIG_EXPERT and visible with CONFIG_EMBEDDED.
- Set certain default values of some configurations differently,
following the assumption that configuring a kernel build for an
embedded system generally starts with a different set of default values
compared to kernel builds for all other kind of systems.
Considering the first purpose, at the point in time where CONFIG_EMBEDDED
was renamed to CONFIG_EXPERT, CONFIG_EXPERT already made 130 more options
become visible throughout all different menus for the kernel configuration.
Over the last decade, this has gradually increased, so that currently, with
CONFIG_EXPERT, roughly 170 more options become visible throughout all
different menus for the kernel configuration. In comparison, currently with
CONFIG_EMBEDDED enabled, just seven more options are visible, one in x86,
one in arm, and five for the ChipIdea Highspeed Dual Role Controller.
As the numbers suggest, these two levels of enabling the visibility of even
more configuration options---beyond what CONFIG_EXPERT enables---never
evolved to a good solution in the last decade. In other words, this
additional level of visibility of configuration option with CONFIG_EMBEDDED
compared to CONFIG_EXPERT has since its introduction never become really
valuable. It requires quite some investigation to actually understand what
is additionally visible and it does not differ significantly in complexity
compared to just enabling CONFIG_EXPERT. This CONFIG_EMBEDDED---or any
other config to show more detailed options beyond CONFIG_EXPERT---is
unlikely to be valuable unless somebody puts significant effort in
identifying how such visibility options can be properly split and creating
clear criteria, when some config option is visible with CONFIG_EXPERT and
when some config option is visible only with some further option enabled
beyond CONFIG_EXPERT, such as CONFIG_EMBEDDED attempted to do. For now, it
is much more reasonable to simply make those additional seven options that
visible with CONFIG_EMBEDDED, visible with CONFIG_EXPERT, and then remove
CONFIG_EMBEDDED. If anyone spends significant effort in structuring the
visibility of config options, they may re-introduce suitable new config
options simply as they see fit.
Make the configs for usb chipidea glue drivers visible when CONFIG_EXPERT
is enabled.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20220908104337.11940-5-lukas.bulwahn@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some platforms make use of VBUS control over PHY which means controller
driver has to access PHY registers to turn on/off VBUS line.This patch
adds support for such platforms in chipidea.
Flag 'CI_HDRC_PHY_VBUS_CONTROL' added to support VBus control feature.
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Piyush Mehta <piyush.mehta@xilinx.com>
Signed-off-by: Piyush Mehta <piyush.mehta@amd.com>
Link: https://lore.kernel.org/r/20220822054051.2941282-1-piyush.mehta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Runtime verification infrastructure
This is the biggest change for this pull request. It introduces the
runtime verification that is necessary for running Linux on safety
critical systems. It allows for deterministic automata models to be
inserted into the kernel that will attach to tracepoints, where the
information on these tracepoints will move the model from state to state.
If a state is encountered that does not belong to the model, it will then
activate a given reactor, that could just inform the user or even panic
the kernel (for which safety critical systems will detect and can recover
from).
- Two monitor models are also added: Wakeup In Preemptive (WIP - not to be
confused with "work in progress"), and Wakeup While Not Running (WWNR).
- Added __vstring() helper to the TRACE_EVENT() macro to replace several
vsnprintf() usages that were all doing it wrong.
- eprobes now can have their event autogenerated when the event name is left
off.
- The rest is various cleanups and fixes.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYu0yzRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qj4HAP4tQtV55rjj4DQ5XIXmtI3/64PmyRSJ
+y4DEXi1UvEUCQD/QAuQfWoT/7gh35ltkfeS4t3ockzy14rrkP5drZigiQA=
=kEtM
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- Runtime verification infrastructure
This is the biggest change here. It introduces the runtime
verification that is necessary for running Linux on safety critical
systems.
It allows for deterministic automata models to be inserted into the
kernel that will attach to tracepoints, where the information on
these tracepoints will move the model from state to state.
If a state is encountered that does not belong to the model, it will
then activate a given reactor, that could just inform the user or
even panic the kernel (for which safety critical systems will detect
and can recover from).
- Two monitor models are also added: Wakeup In Preemptive (WIP - not to
be confused with "work in progress"), and Wakeup While Not Running
(WWNR).
- Added __vstring() helper to the TRACE_EVENT() macro to replace
several vsnprintf() usages that were all doing it wrong.
- eprobes now can have their event autogenerated when the event name is
left off.
- The rest is various cleanups and fixes.
* tag 'trace-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (50 commits)
rv: Unlock on error path in rv_unregister_reactor()
tracing: Use alignof__(struct {type b;}) instead of offsetof()
tracing/eprobe: Show syntax error logs in error_log file
scripts/tracing: Fix typo 'the the' in comment
tracepoints: It is CONFIG_TRACEPOINTS not CONFIG_TRACEPOINT
tracing: Use free_trace_buffer() in allocate_trace_buffers()
tracing: Use a struct alignof to determine trace event field alignment
rv/reactor: Add the panic reactor
rv/reactor: Add the printk reactor
rv/monitor: Add the wwnr monitor
rv/monitor: Add the wip monitor
rv/monitor: Add the wip monitor skeleton created by dot2k
Documentation/rv: Add deterministic automata instrumentation documentation
Documentation/rv: Add deterministic automata monitor synthesis documentation
tools/rv: Add dot2k
Documentation/rv: Add deterministic automaton documentation
tools/rv: Add dot2c
Documentation/rv: Add a basic documentation
rv/include: Add instrumentation helper functions
rv/include: Add deterministic automata monitor definition via C macros
...
Instead of open coding a __dynamic_array() with a fixed length (which
defeats the purpose of the dynamic array in the first place). Use the new
__vstring() helper that will use a va_list and only write enough of the
string into the ring buffer that is needed.
Link: https://lkml.kernel.org/r/20220705224749.991587733@goodmis.org
Cc: Peter Chen <peter.chen@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----
iQFRBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmK4zgIeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGrI8H+MeIYPff1m9vh1rZ
u1eCCtw/A+NqJ5l0Cq3Zj090crMb8zVkxr5QrdPxxJuxAK8AI/XzOUQivnNayp6v
bvWcbj9e95ZoIQjbPakozo3KYnaHXMFfrq6JNdGIBJ5yt5pVHtJ3iZk25wUZEghD
8lxoz4Uiuo14ZbLnlLjbXr5OEVupOH1OoQPghkSoolD8JBe1coOIYbzzJ69HBwNg
kCUyD0CsFCBpy0P7yBnPNrvQGOt+NVz9FLfEbYFj+ydQjzw3NNw7tyKTahqp7ScN
BS5Ftt0kuHqOyWDO9OP6dG1kGmvIWQZkrEroz1TS4FfgrrPRr5r0N9+tGvr9+tpZ
1tjaBA==
=L7lN
-----END PGP SIGNATURE-----
Merge 5.19-rc4 into usb-next
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The complete() function may be called even though request is not
completed. In this case, it's necessary to check request status so
as not to set device address wrongly.
Fixes: 10775eb17b ("usb: chipidea: udc: update gadget states according to ch9")
cc: <stable@vger.kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20220623030242.41796-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use dev_err_probe() to simplify handling errors in ci_hdrc_imx_probe()
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20220614120522.1469957-1-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The chipidea udc core is capable of reading the current frame index from
hardware. This patch adds the get_frame callback to the driver.
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20220616194459.2981519-1-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here is the big set of USB and Thunderbolt driver changes for 5.17-rc1.
Nothing major in here, just lots of little updates and cleanups. These
include:
- some USB header fixes picked from Ingo's header-splitup work
- more USB4/Thunderbolt hardware support added
- USB gadget driver updates and additions
- USB typec additions (includes some acpi changes, which were
acked by the ACPI maintainer)
- core USB fixes as found by syzbot that were too late for
5.16-final
- USB dwc3 driver updates
- USB dwc2 driver updates
- platform_get_irq() conversions of some USB drivers
- other minor USB driver updates and additions
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYd66Tg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynH2wCfetT95966ZMICGDmdwZpEBBYCO1wAn2v9Pwd2
CeXrMLdaOr9WkV2P6mE5
=K4Jh
-----END PGP SIGNATURE-----
Merge tag 'usb-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB and Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for
5.17-rc1.
Nothing major in here, just lots of little updates and cleanups. These
include:
- some USB header fixes picked from Ingo's header-splitup work
- more USB4/Thunderbolt hardware support added
- USB gadget driver updates and additions
- USB typec additions (includes some acpi changes, which were acked
by the ACPI maintainer)
- core USB fixes as found by syzbot that were too late for 5.16-final
- USB dwc3 driver updates
- USB dwc2 driver updates
- platform_get_irq() conversions of some USB drivers
- other minor USB driver updates and additions
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (111 commits)
docs: ABI: fixed formatting in configfs-usb-gadget-uac2
usb: gadget: u_audio: Subdevice 0 for capture ctls
usb: gadget: u_audio: fix calculations for small bInterval
usb: dwc2: gadget: initialize max_speed from params
usb: dwc2: do not gate off the hardware if it does not support clock gating
usb: dwc3: qcom: Fix NULL vs IS_ERR checking in dwc3_qcom_probe
headers/deps: USB: Optimize <linux/usb/ch9.h> dependencies, remove <linux/device.h>
USB: common: debug: add needed kernel.h include
headers/prep: Fix non-standard header section: drivers/usb/host/ohci-tmio.c
headers/prep: Fix non-standard header section: drivers/usb/cdns3/core.h
headers/prep: usb: gadget: Fix namespace collision
USB: core: Fix bug in resuming hub's handling of wakeup requests
USB: Fix "slab-out-of-bounds Write" bug in usb_hcd_poll_rh_status
usb: dwc3: dwc3-qcom: Add missing platform_device_put() in dwc3_qcom_acpi_register_core
usb: gadget: clear related members when goto fail
usb: gadget: don't release an existing dev->buf
usb: dwc2: Simplify a bitmap declaration
usb: Remove usb_for_each_port()
usb: typec: port-mapper: Convert to the component framework
usb: Link the ports to the connectors they are attached to
...
There are cleanups and minor bugfixes across several SoC specific
drivers, for Qualcomm, Samsung, NXP i.MX, AT91, Tegra, Keystone,
Renesas, ZynqMP
Noteworthy new features are:
- The op-tee firmware driver gains support for asynchronous
notifications from secure-world firmware.
- Qualcomm platforms gain support for new SoC types in various
drivers: power domain, cache controller, RPM sleep, soc-info
- Samsung SoC drivers gain support for new SoCs in ChipID and PMU,
as well as a new USIv2 driver that handles various types of
serial communiction (uart, i2c, spi)
- Renesas adds support for R-Car S4-8 (R8A779F0) in multiple
drivers, as well as memory controller support for RZ/G2L
(R9A07G044).
- Apple M1 gains support for the PMGR power management driver
-----BEGIN PGP SIGNATURE-----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=tlZT
-----END PGP SIGNATURE-----
Merge tag 'drivers-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"There are cleanups and minor bugfixes across several SoC specific
drivers, for Qualcomm, Samsung, NXP i.MX, AT91, Tegra, Keystone,
Renesas, ZynqMP
Noteworthy new features are:
- The op-tee firmware driver gains support for asynchronous
notifications from secure-world firmware.
- Qualcomm platforms gain support for new SoC types in various
drivers: power domain, cache controller, RPM sleep, soc-info
- Samsung SoC drivers gain support for new SoCs in ChipID and PMU, as
well as a new USIv2 driver that handles various types of serial
communiction (uart, i2c, spi)
- Renesas adds support for R-Car S4-8 (R8A779F0) in multiple drivers,
as well as memory controller support for RZ/G2L (R9A07G044).
- Apple M1 gains support for the PMGR power management driver"
* tag 'drivers-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits)
soc: qcom: rpmh-rsc: Fix typo in a comment
soc: qcom: socinfo: Add SM6350 and SM7225
dt-bindings: arm: msm: Don't mark LLCC interrupt as required
dt-bindings: firmware: scm: Add SM6350 compatible
dt-bindings: arm: msm: Add LLCC for SM6350
soc: qcom: rpmhpd: Sort power-domain definitions and lists
soc: qcom: rpmhpd: Remove mx/cx relationship on sc7280
soc: qcom: rpmhpd: Rename rpmhpd struct names
soc: qcom: rpmhpd: sm8450: Add the missing .peer for sm8450_cx_ao
soc: qcom: socinfo: add SM8450 ID
soc: qcom: rpmhpd: Add SM8450 power domains
dt-bindings: power: rpmpd: Add SM8450 to rpmpd binding
soc: qcom: smem: Update max processor count
dt-bindings: arm: qcom: Document SM8450 SoC and boards
dt-bindings: firmware: scm: Add SM8450 compatible
dt-bindings: arm: cpus: Add kryo780 compatible
soc: qcom: rpmpd: Add support for sm6125
dt-bindings: qcom-rpmpd: Add sm6125 power domains
soc: qcom: aoss: constify static struct thermal_cooling_device_ops
PM: AVS: qcom-cpr: Use div64_ul instead of do_div
...
The ChipIdea glue drivers just copy the glue resources to the "ci_hdrc"
child device. Instead, set the child device's DT node pointer to the
parent device's node so that platform_get_irq() can find the IRQ
resources in the DT. This removes the need for statically populating the
IRQ resources from the DT which has been deprecated for some time.
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211215225646.1997946-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Tegra USB controller belongs to the core power domain and we're going
to enable GENPD support for the core domain. Now USB controller must be
resumed using runtime PM API in order to initialize the USB power state.
We already support runtime PM for the CI device, but CI's PM is separated
from the RPM managed by tegra-usb driver. Add runtime PM and OPP support
to the driver.
Acked-by: Peter Chen <peter.chen@kernel.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
If the first call to devm_usb_get_phy_by_phandle(dev, "fsl,usbphy", 0)
fails with something other than -ENODEV then it leads to an error
pointer dereference. For those errors we should just jump directly to
the error handling.
Fixes: 8253a34bfa ("usb: chipidea: ci_hdrc_imx: Also search for 'phys' phandle")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211117074923.GF5237@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'destroy_workqueue()' already drains the queue before destroying it, so
there is no need to flush it explicitly.
Remove the redundant 'flush_workqueue()' calls.
This was generated with coccinelle:
@@
expression E;
@@
- flush_workqueue(E);
destroy_workqueue(E);
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Peter Chen <peter.chen@kernel.or> # for chipidea part
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/563123a8117d6cafae3f134e497587bd2b8bb7f4.1636734453.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chipidea core was calling the interrupt handler from non-IRQ context
with interrupts enabled, something which can lead to a deadlock if
there's an actual interrupt trying to take a lock that's already held
(e.g. the controller lock in udc_irq()).
Add a wrapper that can be used to fake interrupts instead of calling the
handler directly.
Fixes: 3ecb3e09b0 ("usb: chipidea: Use extcon framework for VBUS and ID detect")
Fixes: 876d4e1e82 ("usb: chipidea: core: add wakeup support for extcon")
Cc: Peter Chen <peter.chen@kernel.org>
Cc: stable@vger.kernel.org # 4.4
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211021083447.20078-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Root-cause:
There is an issue like endpoint is not recognized as primed, when bus
have more pressure and the add dTD tripwire semaphore (ATDTW bit in
USBCMD register) that can cause the controller to ignore a dTD that is
added to a primed endpoint.
This issue observed with the Windows10 host machine.
Workaround:
The software must implement a periodic cycle, and check for each dTD,
if the endpoint is primed. It can do this by reading the corresponding
bits in the ENDPTPRIME and ENDPTSTAT registers. If these bits are read
at 0, the software needs to re-prime the endpoint by writing 1 to the
corresponding bit in the ENDPTPRIME register.
Added conditional revision check of 2.20[CI_REVISION_22].
Link: https://lore.kernel.org/linux-usb/SJ0PR02MB8644CBBA848A0F68323F1AA5D4D99@SJ0PR02MB8644.namprd02.prod.outlook.com/
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Piyush Mehta <piyush.mehta@xilinx.com>
Link: https://lore.kernel.org/r/20210913140005.955699-1-piyush.mehta@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When passing 'phys' in the devicetree to describe the USB PHY phandle
(which is the recommended way according to
Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt) the
following NULL pointer dereference is observed on i.MX7 and i.MX8MM:
[ 1.489344] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098
[ 1.498170] Mem abort info:
[ 1.500966] ESR = 0x96000044
[ 1.504030] EC = 0x25: DABT (current EL), IL = 32 bits
[ 1.509356] SET = 0, FnV = 0
[ 1.512416] EA = 0, S1PTW = 0
[ 1.515569] FSC = 0x04: level 0 translation fault
[ 1.520458] Data abort info:
[ 1.523349] ISV = 0, ISS = 0x00000044
[ 1.527196] CM = 0, WnR = 1
[ 1.530176] [0000000000000098] user address but active_mm is swapper
[ 1.536544] Internal error: Oops: 96000044 [#1] PREEMPT SMP
[ 1.542125] Modules linked in:
[ 1.545190] CPU: 3 PID: 7 Comm: kworker/u8:0 Not tainted 5.14.0-dirty #3
[ 1.551901] Hardware name: Kontron i.MX8MM N801X S (DT)
[ 1.557133] Workqueue: events_unbound deferred_probe_work_func
[ 1.562984] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO BTYPE=--)
[ 1.568998] pc : imx7d_charger_detection+0x3f0/0x510
[ 1.573973] lr : imx7d_charger_detection+0x22c/0x510
This happens because the charger functions check for the phy presence
inside the imx_usbmisc_data structure (data->usb_phy), but the chipidea
core populates the usb_phy passed via 'phys' inside 'struct ci_hdrc'
(ci->usb_phy) instead.
This causes the NULL pointer dereference inside imx7d_charger_detection().
Fix it by also searching for 'phys' in case 'fsl,usbphy' is not found.
Tested on a imx7s-warp board.
Fixes: 746f316b75 ("usb: chipidea: introduce imx7d USB charger detection")
Cc: stable@vger.kernel.org
Reported-by: Heiko Thiery <heiko.thiery@gmail.com>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210921113754.767631-1-festevam@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If wIndex is 0 (and it often is), these calculations underflow and
UBSAN complains, here resolve this by not decrementing the index when
it is equal to 0, this copies the solution from commit 85e3990bea
("USB: EHCI: avoid undefined pointer arithmetic and placate UBSAN")
Reported-by: Zhipeng Wang <zhipeng.wang_1@nxp.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
Link: https://lore.kernel.org/r/1624004938-2399-1-git-send-email-jun.li@nxp.com
Signed-off-by: Peter Chen <peter.chen@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmDPuyMeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGvxgH/RKvSuRPwkJ2Jcp9
VLi5kCbqtJlYLq6tB6peSJ8otKgxkcRwC0pIY4LlYIAWYboktLQ5RKp/9nB2h2FN
aMZUMu6AI/lVJyFMI5MnKnJIUiUq+WXR3lSSlw68vwFLFdzqUZFNq+bqeiVvnIy1
yqA6naj24Tu/RbYffQoPvdSJcU2SLXRMxwD8HRGiU2d51RaFsOvsZvF+P5TVcsEV
ZmttJeER21CaI/A809eqaFmyGrUOcZZK9roZEbMwanTZOMw18biEsLu/UH4kBX01
JC4+RlGxcWjQ5YNZgChsgoOK/CHzc6ITztTntdeDWAvwZjQFzV7pCy4/3BWne3O+
5178yHM=
=o8cN
-----END PGP SIGNATURE-----
Merge tag 'v5.13-rc7' into usb-next
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
i.MX8MM cannot detect certain CDP USB HUBs. usbmisc_imx.c driver is not
following CDP timing requirements defined by USB BC 1.2 specification
and section 3.2.4 Detection Timing CDP.
During Primary Detection the i.MX device should turn on VDP_SRC and
IDM_SINK for a minimum of 40ms (TVDPSRC_ON). After a time of TVDPSRC_ON,
the i.MX is allowed to check the status of the D- line. Current
implementation is waiting between 1ms and 2ms, and certain BC 1.2
complaint USB HUBs cannot be detected. Increase delay to 40ms allowing
enough time for primary detection.
During secondary detection the i.MX is required to disable VDP_SRC and
IDM_SNK, and enable VDM_SRC and IDP_SINK for at least 40ms (TVDMSRC_ON).
Current implementation is not disabling VDP_SRC and IDM_SNK, introduce
disable sequence in imx7d_charger_secondary_detection() function.
VDM_SRC and IDP_SINK should be enabled for at least 40ms (TVDMSRC_ON).
Increase delay allowing enough time for detection.
Cc: <stable@vger.kernel.org>
Fixes: 746f316b75 ("usb: chipidea: introduce imx7d USB charger detection")
Signed-off-by: Breno Lima <breno.lima@nxp.com>
Signed-off-by: Jun Li <jun.li@nxp.com>
Link: https://lore.kernel.org/r/20210614175013.495808-1-breno.lima@nxp.com
Signed-off-by: Peter Chen <peter.chen@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/usb/chipidea/udc.c:247: warning: expecting prototype for hw_is_port_high_speed(). Prototype was for hw_port_is_high_speed() instead
Cc: Peter Chen <peter.chen@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210526130037.856068-17-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/usb/chipidea/otg.c:25: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/usb/chipidea/otg.c:78: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/usb/chipidea/otg.c:143: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Cc: Peter Chen <peter.chen@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210526130037.856068-15-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/usb/chipidea/core.c:343: warning: expecting prototype for _ci_usb_phy_exit(). Prototype was for ci_usb_phy_exit() instead
Cc: Peter Chen <peter.chen@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: David Lopo <dlopo@chipidea.mips.com>
Cc: linux-usb@vger.kernel.org
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210526130037.856068-14-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no need to store the dentry pointer for a debugfs file that we
only use to remove it when the device goes away. debugfs can do the
lookup for us instead, saving us some trouble, and making things smaller
overall.
Cc: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20210525171419.758146-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Silence deferred probe error caused by the PHY driver which is probed
later than the ChipIdea driver.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210314203927.2572-1-digetx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zero-length and one-element arrays are deprecated, see
Documentation/process/deprecated.rst
Flexible-array members should be used instead.
Generated by: scripts/coccinelle/misc/flexible_array.cocci
Fixes: fc53d52790 ("usb: chipidea: tegra: Support host mode")
CC: Peter Geis <pgwipeout@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2102132108040.2720@hadrien
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The UDC/OTG controller could be switched to a host mode and the
TXFILLTUNING register needs to be programmed properly for the host
mode. Hence specify the TX FIFO threshold in the UDC SoC info.
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20201218120246.7759-8-digetx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tegra PHY driver now supports waking up controller from a low power mode.
Enable runtime PM in order to put controller into the LPM during idle.
Tested-by: Matt Merhar <mattmerhar@protonmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Ion Agorria <ion@agorria.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20201218120246.7759-7-digetx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add USB host mode to the Tegra HDRC driver. This allows us to benefit from
support provided by the generic ChipIdea driver instead of duplicating the
effort in a separate ehci-tegra driver.
Tested-by: Matt Merhar <mattmerhar@protonmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Tested-by: Ion Agorria <ion@agorria.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20201218120246.7759-6-digetx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename all occurrences in the code from "udc" to "usb" and change the
Kconfig entry in order to show that this driver supports USB modes other
than device-only mode. The follow up patch will add host-mode support and
it will be cleaner to perform the renaming separately, i.e. in this patch.
Tested-by: Matt Merhar <mattmerhar@protonmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Ion Agorria <ion@agorria.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20201218120246.7759-5-digetx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The OF core adds an alias based on the OF device ID table, which is enough
to have the driver autoloaded. The legacy MODULE_ALIAS macro was relevant
to a pre-OF board files which manually created platform devices, this is
irrelevant to the modern ARM kernels since devices are created by the OF
core. Remove the unnecessary macro in order to keep the driver's code
cleaner.
Tested-by: Matt Merhar <mattmerhar@protonmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Ion Agorria <ion@agorria.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20201218120246.7759-4-digetx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
if of_find_device_by_node() succeed, usbmisc_get_init_data() doesn't have
a corresponding put_device(). Thus add put_device() to fix the exception
handling for this function implementation.
Fixes: ef12da914e ("usb: chipidea: imx: properly check for usbmisc")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201117011430.642589-1-yukuai3@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For Chipidea USB2:
- Add tracepoint support for UDC
- Some tiny improvements
For Cadence USB3
- Add some quirks for host mode, and let host work well at more use cases
* SKIP_PHY_INIT
* Disable BEI
* Enable runtime PM default for i.mx platform
- Some tiny improvements
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEDaZUZmFxRG/wNThrSFkpgVDWcbsFAl/R7S0ACgkQSFkpgVDW
cbv/QQf+KhHOZYYzGMZXvyDiFIoE28sfrxyTrZKoDUXIWuAsLegpvY/bw6YJxAZy
bj8z/iAk6NOyQLMH+2ULQoJfc8GX18O05ZOSKg+prcIw5e398TEH0NFrJZV/0dBa
VSk0+pGaRvn6jLfw/lF2EImf4gHLh4EsgDOgWn4ffZL3IRwmGPub2splppmu9N88
1fbrxexc5NORnIpigH0kkftPQkda7slPfo3pMRjpHHb49SDQVw0C2x6FPooQxoaz
c7DWEKfy2E8OcRDCgFdFFLIZNELSlvLHXOk1H8taTXlcVSHHFgos69qzCdOeiRuq
OMHzsRM+M2XEb7LlSPYU0+G/K6SXFQ==
=dV/G
-----END PGP SIGNATURE-----
Merge tag 'usb-v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next
Peter writes:
Below are main changes for v5.11-rc1:
For Chipidea USB2:
- Add tracepoint support for UDC
- Some tiny improvements
For Cadence USB3
- Add some quirks for host mode, and let host work well at more use cases
* SKIP_PHY_INIT
* Disable BEI
* Enable runtime PM default for i.mx platform
- Some tiny improvements
* tag 'usb-v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb:
MAINTAINERS: Add myself as a reviewer for CADENCE USB3 DRD IP DRIVER
usb: chipidea: ci_hdrc_imx: Use of_device_get_match_data()
usb: chipidea: usbmisc_imx: Use of_device_get_match_data()
usb: cdns3: fix NULL pointer dereference on no platform data
usb: chipidea: trace: fix the endian issue
usb: chipidea: add tracepoint support for udc
doc: dt-binding: cdns,usb3: add wakeup-irq
usb: cdns3: imx: enable runtime pm by default
usb: cdns3: add quirk for enable runtime pm by default
usb: cdns3: host: disable BEI support
usb: cdns3: host: add xhci_plat_priv quirk XHCI_SKIP_PHY_INIT
usb: cdns3: host: add .suspend_quirk for xhci-plat.c
usb: cdns3: Rids of duplicate error message
usb: cdns3: Add static to cdns3_gadget_exit function
The retrieval of driver data via of_device_get_match_data() can make
the code simpler.
Use of_device_get_match_data() to simplify the code.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
The retrieval of driver data via of_device_get_match_data() can make
the code simpler.
Use of_device_get_match_data() to simplify the code.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
According to the i.MX6UL Errata document:
https://www.nxp.com/docs/en/errata/IMX6ULCE.pdf
ERR007881 also affects i.MX6UL, so pass the
CI_HDRC_DISABLE_DEVICE_STREAMING flag to workaround the issue.
Fixes: 52fe568e5d ("usb: chipidea: imx: add imx6ul usb support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/20201207020909.22483-2-peter.chen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The pinctrl setting may lost during the system suspend
(eg, imx7ulp), it needs to restore them after system resume.
Meanwhile, some platforms may need to set special pinctrl
for power comsumption.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
These two parameters are used to improve USB signal for board level,
in this commit, we read it from the dtb, and write to related register
during the initialization.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEDaZUZmFxRG/wNThrSFkpgVDWcbsFAl8g2ksACgkQSFkpgVDW
cbtAMwf/dkrCfmE2HpvAsZqL68WOC1yTaN9f3v7bzXc2oD2WRsk3aKGZGLeXvMtN
aruD3ctxOVEom5FHrff8x3G1CBw8wsbl+yjT6aTlbcFY/Yzmww7RABUO5Xp1F9aB
aTuDcLeoY22UHkzNdeNrixEuOR9xeyhZjFybW0cZ6FddP0mj4SUNNczxfaGvmLLI
DOJ7oc8KC9pIwhoF9065GH0p5PrXVnZvcBUXWs5PASjj4lWb3DiMGxhZRPBLbB6l
YifzRa+C90BP4AjTptS03fD/3knciZCM8Z1GsVYdKLuO4NOPlcZeEJEeUGmkCr0L
QmOpk5Sh8nACisOCqn3gQDo7jAI6Mg==
=JnWY
-----END PGP SIGNATURE-----
Merge tag 'usb-ci-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next
Peter writes:
ENDIAN issue fix and one query controller role API is introduced.
* tag 'usb-ci-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb:
usb: chipidea: imx: get available runtime dr mode for wakeup setting
usb: chipidea: add query_available_role interface
Documentation: ABI: usb: chipidea: Update Li Jun's e-mail
usb: chipidea: udc: fix the ENDIAN issue
If runtime dr_mode is not dual-role, it doesn't need to enable ID
wakeup interrupt.
If runtime dr_mode is host, it doesn't need to enable VBUS
wakeup interrupt.
With these changes, the user will not get the unexpected wakeup
for single role use case. For example, the host-only use case at
Micro-AB port, the controller should not be waken up by only
plug in Micro-AB cable or the Micro-B cable with host.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
The glue layer may need to know current available role to do some
setting, eg, the wakeup setting. So we add ci_hdrc_query_available_role
for that.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Lukas Bulwahn