Commit Graph

10 Commits

Author SHA1 Message Date
Philip Avinash a2bcd77659 ARM: davinci: da850: Use #include for all device trees
Replace /include/ by #include for da850 device tree files, in order to
use the C pre-processor, making use of #define features possible.

Signed-off-by: Philip Avinash <avinashphilip@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-06-20 15:04:30 +05:30
Manjunathappa, Prakash 4f4d9d4dc5 ARM: davinci: da850-evm: add SPI flash support
Enable m25p64 SPI flash support on da850-EVM. Also
add partition information of SPI flash.

Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-04-17 22:19:55 +05:30
Manjunathappa, Prakash 88df4122ce ARM: davinci: da850: add mmc DT entries
Add DT entry for MMC. Also add entry for pinmux information.
Tested:
1) Without GPIO card detection and EDMA support as DT support for
   GPIO and EDMA are yet come.
2) By creating/deleting files and mounting/unmounting the partition.

Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com>
Cc: linux-mmc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: davinci-linux-open-source@linux.davincidsp.com
Cc: devicetree-discuss@lists.ozlabs.org
Cc: cjb@laptop.org
Cc: Sekhar Nori <nsekhar@ti.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-04-04 16:57:24 +05:30
Vishwanathrao Badarkhe, Manish c3847a395b ARM: davinci: da850: add tps6507x regulator DT data
Add tps6507x regulator device tree data to da850-evm by
adding regulator consumers with tightened constraints
and regulator-name.TPS6507x regulator handle can be obtained
by using this regulator name.
Regulator constraints are added as per da850 board file.

Regulator names are given as per maximum output voltage the
regulator is capable to provide.
for e.g. regulator name for dcdc1 is "VDCDC1_3.3V".
Also, add tps6507x PMIC I2C slave device under I2C0 node.

Tested on da850-evm.

Signed-off-by: Vishwanathrao Badarkhe, Manish <manishv.b@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-04-03 09:44:52 +05:30
Kumar, Anil 518f97dbb8 ARM: davinci: da850: add wdt DT node
Add da850 wdt DT node.
Add OF_DEV_AUXDATA for wdt driver to use wdt clock.

Signed-off-by: Kumar, Anil <anilkumar.v@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-02-09 22:38:26 +05:30
Vishwanathrao Badarkhe, Manish 01729ccf19 ARM: davinci: da850: add DT node for I2C0
Add I2C0 device tree and pin muxing information to da850-evm.
Also, add OF_DEV_AUXDATA for I2C0 controller driver in da850
board dt file to use I2C0 clock.
Verified i2c0 node gets created in sys class interface as
"/sys/class/i2c-dev/i2c-0/subsystem/i2c-0".

nsekhar@ti.com: tested using i2cdetect and i2cdump.

Signed-off-by: Vishwanathrao Badarkhe, Manish <manishv.b@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-02-09 22:37:43 +05:30
Mrugesh Katepallewar 1661636d36 ARM: davinci: da850: add RTC DT entries
Add RTC DT entries in da850 dts file.

Tested on da850-evm device.
Test Procedure:
$ date 2013.01.28-10:00:00 # usage: date[YYYY.]MM.DD-hh:mm[:ss]
$ hwclock -w
(reset board and check system time)

Signed-off-by: Mrugesh Katepallewar <mrugesh.mk@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-01-28 21:28:11 +05:30
Kumar, Anil 99b8800ca8 ARM: davinci: da850: add NAND driver DT entries
Add NAND driver DT node and related pinctrl DT data to export NAND
functionality on da850 evm.

Signed-off-by: Kumar, Anil <anilkumar.v@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-01-21 17:57:07 +05:30
Kumar, Anil 1faaba3dd7 ARM: davinci: da850: add pinctrl driver DT entries
For DT, DaVinci platform can use pinctrl-single driver for handling
padconf registers.

Enable PINCTRL Kconfig for MACH_DA8XX_DT platform. Add required
pinctrl DT entries in da850 dts file.

 Test procedure
  1)Populate DT file with NAND node information.
  2)Populate board DT file with pinmux information for NAND.
  3)Boot and confirm NAND is detected by the kernel.
  4)cat /proc/mtd to show partitions.

Signed-off-by: Kumar, Anil <anilkumar.v@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-01-21 17:51:07 +05:30
Sekhar Nori 27e6e0d3da ARM: davinci: da850 evm: add DT data
Add device tree data for DA850 EVM. At this time, only
information on serial ports is added.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-10-29 15:43:13 +05:30