As the IP module driver takes care of freeing its resources.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is not needed as the IP module should free its IRQ using
tpci200_free_irq callback.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As the ipack_bus_unregister() takes care of unregistering the devices plugged
in the carrier, it is not needed to do it in the carrier driver.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Find the IP modules that are plugged to the carrier and unregister them.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As the IRQ was requested by the driver, it should free it also.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ipoctal devices can be uninstalled from the ipack_driver_unregister()
call as the device model calles the bus's .remove() function for each device
registered by the driver and it will execute the .remove() function of the
ipoctal driver.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using the call to the ipack_device_unregister() function to avoid the
strange way it was doing, as the device model will take care of calling
the bus's .remove function when a device is being unregistered.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As indicated in the documentation of pci_dev_get.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move iounmap and pci_release_region to tpci200_unregister(), as it is the place
where the clean-up of the device is done.
Also, renamed iounmap() to pci_iounmap() as the mapped region was requested
from PCI bus.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We check the CRC and store the result of the check in struct ipac_device.
A warning is emitted if the check fails. However we leave it to the
IPack module device to refuse to initialize due to a bad CRC. I have seen
otherwise good modules with bad CRCs.
Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Resetting the previous timeout we avoid to read the timeout status register
and see timeout errors that don't correspond to the present state of the
device.
Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reading the ID space at 8 MHz is always supported. Most carriers will
boot up in 8MHz mode. Still, play it safe and ensure we are operating at
8Mhz.
Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As the linked list was removed before, delete the useless struct list_head
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After a successful match is found the driver field in struct device is
set by the core device code. We can use this field.
Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We provide callbacks to:
- set/get the clockrate a module is accessed at,
- get the error state of a slot,
- get/reset the timeout state of a slot.
Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This saves us from a little pointer arithmetic and cleans up the code a bit.
Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While registering the thermal zone, it is required to have the cooling
devices already setup, so that the .bind callback can succeed.
Due to that, the driver code needs to be reorganized so that we first
setup the cooling devices then the zones. This way we cope with the
right thermal framework initialization sequence.
This patch changes the order of the thermal zone initialization,
so that we create it only when the cooling devices are available.
It also adds some defensive checks for the config data, so that
the callbacks are ready for calls when the data is still not
initialized.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While registering the omap thermal zones we need to
properly specify TC1 and TC2, as long as the proper
passive polling period and monitor period.
This patch fixes the parameters passed while registering
the thermal zone.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The comedi core always calls the 'do_cmdtest' function before it
calls the 'do_cmd' function. The 'do_cmdtest' for this driver calls
i8253_cascade_ns_to_timer_2div() to validate the cmd->convert_arg.
This call sets the dev_private 'div1' and 'div2' values needed to
program the 8254 timer. There is no need to call the i8253 function
a second time in the do_cmd function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the helper function cfc_check_trigger_is_unique.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
"Step 2" of each do_cmdtest checks that the trigger sources are
unique by doing something like this for each trigger:
if (cmd->start_src != TRIG_TIMER &&
cmd->start_src != TRIG_FOLLOW &&
cmd->start_src != TRIG_EXT)
err++;
/* Test the remaining triggers similarly */
if (err)
return 2;
Introduce a helper function in comedi_fc to handle this boilerplate.
The drivers can then just do:
err |= cfc_check_trigger_is_unique(cmd->start_src);
/* Test the remaining triggers similarly */
if (err)
return 2;
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a single source trigger passes "step 1" of the do_cmdtest function
they are already unique. There is no need to recheck them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the pci9111_check_trigger_src macro and use the helper
function cfc_check_trigger_src instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All of the comedi drivers that support the 'cmd' callback also
require a 'do_cmdtest' callback. The do_cmdtest validates the
comedi_cmd before it is executed.
"Step 1" of each do_cmdtest does a trivial validation of the
trigger sources by doing something like this for each trigger:
int err = 0;
unsigned int tmp;
tmp = cmd->start_src;
src &= TRIG_NOW;
if (!src || tmp != src)
err++;
/* Test the remaining triggers similarly */
if (err)
return 1;
Introduce a helper function in comedi_fc to handle this boilerplate.
The drivers can then just do:
err |= cfc_check_trigger_src(&cmd->start_src, TRIG_NOW);
/* Test the remaining triggers similarly */
if (err)
return 1;
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove camel-case variables in gdm_qos.h and gdm_qos.c
Signed-off-by: Macpaul Lin <macpaul@gmail.com>
Cc: Paul Stewart <pstew@chromium.org>
Cc: Ben Chan <benchan@chromium.org>
Cc: Sage Ahn <syahn@gctsemi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Let's define some things locally to avoid breaking build
when irqs.h is removed.
This is needed for the ARM common zImage support.
Cc: Omar Ramirez Luna <omar.ramirez@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'is_valid' variable in the private data is only used in the
detach of the board to determine if the pci9111_reset() function
can be called. That function only requires a valid dev->iobase
to work. Use that for the check instead and remove the unneeded
variable from the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetic reasons, rename the symbols.
Remove the unnecessary () around the symbols in the calls to
i8253_cascade_ns_to_timer_2div().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetic reasons, rename the symbol and fix the whitespace.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Finish renaming the defines for the register map. Move the bit
defines so that they are associated with the register. Remove
the unneeded '0' bit defines.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This macro relies on a local variable having a specific name.
It's used multiple places so change it into a function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These macros rely on a local variable having a specific name.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These macros rely on a local variable having a specific name.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This macro relies on a local variable having a specific name.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This macro relies on a local variable having a specific name.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These macros rely on a local variable having a specific name.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These macros rely on a local variable having a specific name.
The comedi code makes sure the channel number is valid so the mask
of PCI9111_CHANNEL_MASK can be remove.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These macros rely on a local variable having a specific name.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simplify the chan/range in pci9111_ai_insn_read() by using local
variables for hold the values and by just passing insn->chanspec
to the CR_* macros instead of using (&insn->chanspec)[0].
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This debug output should be removed in the final driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This debug output should be removed in the final driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert this PCI driver to use the comedi PCI auto config attach
mechanism by adding an 'attach_pci' callback function. Since the
driver does not require any external configuration options, and
the legacy 'attach' callback is now optional, remove it. The
boardinfo is also not needed now so remove it also.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Samuel Iglesias Gonsálvez