Commit Graph

59 Commits

Author SHA1 Message Date
Nicolas Pitre 6451d7783b arm: remove machine_desc.io_pg_offst and .phys_io
Since we're now using addruart to establish the debug mapping, we can
remove the io_pg_offst and phys_io members of struct machine_desc.

The various declarations were removed using the following script:

  grep -rl MACHINE_START arch/arm | xargs \
  sed -i '/MACHINE_START/,/MACHINE_END/ { /\.\(phys_io\|io_pg_offst\)/d }'

[ Initial patch was from Jeremy Kerr, example script from Russell King ]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: Eric Miao <eric.miao at canonical.com>
2010-10-20 00:27:46 -04:00
Haojian Zhuang 6ac6b817f3 ARM: pxa: encode IRQ number into .nr_irqs
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Acked-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-10-08 16:21:17 +08:00
Eric Miao f97cab28b1 [ARM] pxa: make it clear by converting MMC 'delay_detect' to millisecond
delay_detect in HZ is confusing, convert it to be millisecond based. And
thus remove those unnecessary call to msecs_to_jiffies() at runtime for
this field. Other constants are converted assuming HZ == 100, which are
basically true for those platforms.

The assignment in csb726.c was incorrect, and is fixed in this patch as
a result.

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Marc Zyngier <maz@misterjones.org>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Daniel Mack <daniel@caiaq.de>
2010-05-11 17:25:04 +02:00
Eric Miao 19851c58e6 [ARM] sa1111: allow cascaded IRQs to be used by platforms
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:51 +08:00
Eric Miao c11b6a420b [ARM] pxa: add the missing AC97 pin configurations
Missing AC97 pin configurations are added where pxa_set_ac97_info() are
called for all pxa25x/pxa27x platforms. Where no exact configuration is
provided, use the default as in sound/arm/pxa2xx-ac97-lib.c

Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:48 +08:00
Eric Miao 07bae6c321 [ARM] pxa: simplify the LCD pin configuration for pxa25x platforms
There are only limited possible LCD pin configurations for pxa25x
platforms, simplify this by macro.

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:46 +08:00
Eric Miao 669cb51c6a [ARM] pxa: use chip->ack() instead of accessing GEDR directly
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:45 +08:00
Russell King cc155c6f2c [ARM] pxa: allow platforms to control which uarts are registered
For some platforms, it is inappropriate to register all PXA UARTs.
In some cases, the UARTs may not be used, and in others we may want
to avoid registering the UARTs to allow other drivers (eg, FICP) to
make use of the UART.

In addition, a while back there was a request to be able to pass
platform data to the UART driver.

This patch enables all of this by providing functions platforms can
call to register each individual UART.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:02:55 +08:00
Marek Vasut c4bd017273 [ARM] pxa: add gpio_pwdown(_inverted) into pxaficp_ir.c
and convert PXA-based devices to gpio_pwdown where possible.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10 18:49:39 +08:00
Robert Jarzmik 7a648256b2 [ARM] pxa: factor pxamci gpio handling
Several boards use always the same pattern with pxamci :
request gpio, request irq for that gpio to detect MMC card
insertion, request gpio for read-only mode detection, etc
...

Now that pxamci provides platform_data to describe simple
gpio management of the MMC external controls, use it.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Philipp Zabel <philipp.zabel@gmail.com>
Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: rpurdie@rpsys.net
Cc: drwyrm@gmail.com
Cc: sakoman@gmail.com
Cc: marek.vasut@gmail.com
Cc: s.hauer@pengutronix.de
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10 18:49:30 +08:00
Eric Miao 5438614509 [ARM] pxa: make lubbock specific debugging stuffs back into lubbock.c
This isn't perfect but at least solves the problem of pm.c's dependency
on register definitions in <mach/lubbock.h>, which doesn't make much
sense.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-09 21:22:40 +08:00
Eric Miao da065a0b36 [ARM] pxa: move GPIO register definitions into <mach/gpio.h>
This makes gpio.c fully independent of pxa-regs.h (except for the
virtual address of the registers).

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-09 21:22:37 +08:00
Eric Miao 51c62982a3 [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
Considering the header mess ATM, it is not always possible to include
the correct header files within board code. Let's keep this simple:

  <mach/pxa25x.h>  - for pxa25x based platforms
  <mach/pxa27x.h>  - for pxa27x based platforms
  <mach/pxa300.h>  - for pxa300 based platforms
  <mach/pxa320.h>  - for pxa320 based platforms
  <mach/pxa930.h>  - for pxa930 based platforms

NOTE:

1. one header one board file, they are not compatible (i.e. they have
   conflicting definitions which won't compile if included together).

2. Unless strictly necessary, the following header files are considered
   to be SoC files use _only_, and is not recommended to be included in
   board code:

    <mach/hardware.h>
    <mach/pxa-regs.h>
    <mach/pxa2xx-regs.h>
    <mach/pxa3xx-regs.h>
    <mach/mfp.h>
    <mach/mfp-pxa2xx.h>
    <mach/mfp-pxa25x.h>
    <mach/mfp-pxa27x.h>
    <mach/mfp-pxa3xx.h>
    <mach/mfp-pxa300.h>
    <mach/mfp-pxa320.h>
    <mach/mfp-pxa930.h>

Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-09 21:22:36 +08:00
Dmitry Baryshkov d8aa0251f1 [ARM] 5298/1: Drop desc_handle_irq()
desc_handle_irq() was declared as obsolete since long ago.
Replace it with generic_handle_irq()

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-09 15:00:36 +01:00
Eric Miao 4a5c5eabd4 [ARM] pxa/lubbock: add missing MFP pin configurations
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-26 23:43:21 +01:00
Ian Molton c1ed406c21 [ARM] clocklib: Update users of aliases to new API
This patch removes the hardcoded alias array from pxa25x.c and reimplements
its functionality using the new clock alias call.

Signed-off-by: Ian Molton <spyro@f2s.com>
2008-08-12 12:54:31 +01:00
Jonathan Cameron 1f4de5a0e3 [ARM] 5185/1: Fix spi num_chipselect for lubbock
Change num_chipselect for lubbock ssp master to reflect requirement
of spi subsystem that all buses have at least 1 chip select.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Eric Miao <eric.miao@marvell.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07 10:25:11 +01:00
Russell King a09e64fbc0 [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
This just leaves include/asm-arm/plat-* to deal with.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07 09:55:48 +01:00
Russell King be50972935 [ARM] Remove asm/hardware.h, use asm/arch/hardware.h instead
Remove includes of asm/hardware.h in addition to asm/arch/hardware.h.
Then, since asm/hardware.h only exists to include asm/arch/hardware.h,
update everything to directly include asm/arch/hardware.h and remove
asm/hardware.h.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07 09:40:08 +01:00
Dmitry Baryshkov 6cab486029 [ARM] 5179/1: Replace obsolete IRQT_* and __IRQT_* values with IRQ_TYPE_*
IRQT_* and __IRQT_* were obsoleted long ago by patch [3692/1].
Remove them completely. Sed script for the reference:

s/__IRQT_RISEDGE/IRQ_TYPE_EDGE_RISING/g
s/__IRQT_FALEDGE/IRQ_TYPE_EDGE_FALLING/g
s/__IRQT_LOWLVL/IRQ_TYPE_LEVEL_LOW/g
s/__IRQT_HIGHLVL/IRQ_TYPE_LEVEL_HIGH/g
s/IRQT_RISING/IRQ_TYPE_EDGE_RISING/g
s/IRQT_FALLING/IRQ_TYPE_EDGE_FALLING/g
s/IRQT_BOTHEDGE/IRQ_TYPE_EDGE_BOTH/g
s/IRQT_LOW/IRQ_TYPE_LEVEL_LOW/g
s/IRQT_HIGH/IRQ_TYPE_LEVEL_HIGH/g
s/IRQT_PROBE/IRQ_TYPE_PROBE/g
s/IRQT_NOEDGE/IRQ_TYPE_NONE/g

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-27 09:46:18 +01:00
Eric Miao 3aed74cdea [ARM] pxa: make lubbock to use new smc91x platform data
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Acked-by: Nicolas Pitre <nico@cam.org>
Acked-by: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-12 21:52:41 +01:00
Dmitry Baryshkov 0fc3ff31f1 [ARM] 5146/1: pxa2xx: convert all boards to call pxa2xx_transceiver_mode helper
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-12 21:43:45 +01:00
Guennadi Liakhovetski e172274ccc [ARM] 5088/3: pxa2xx: add pxa2xx_set_spi_info to register pxa2xx-spi platform devices
Add a function to dynamically allocate and register pxa2xx-spi platform
devices, to be used by PXA2xx and PXA3xx based systems. Switch pcm027 and
lubbock to use it.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09 21:31:52 +01:00
Mark Brown 9f19d63828 [ARM] 5085/2: PXA: Move AC97 over to the new central device declaration model
As well as moving all the device declarations to a single one in devices.c
this causes all platforms to register the I/O and interrupt resources for
the AC97 controller.

Cc: eric miao <eric.miao@marvell.com>
Cc: Mike Rapoport <mike@compulab.co.il>
Cc: Lennert Buytenhek <buytenh@wantstofly.org>
Cc: Jürgen Schindele <linux@schindele.name>
Cc: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09 21:31:51 +01:00
Alexey Dobriyan ffebabe0bf [ARM] lubbock: fix compilation
arch/arm/mach-pxa/lubbock.c:399: error: expected '}' before ';' token

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-08 10:58:39 +01:00
eric miao 0454bd09de pxafb: make lubbock/mainstone/zylonite/littleton to use new LCD connection type
Signed-off-by: eric miao <eric.miao@marvell.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 08:29:31 -07:00
Russell King e21e2d467a [ARM] pxa: lubbock: move mis-placed SPI info
The SPI information got placed in the middle of the SMC91x data.
Lets move it up a few lines so that we keep related things grouped
together.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19 11:29:08 +01:00
eric miao 9b02b2df00 [ARM] pxa: use new pin configuration mechanism for lubbock
Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19 11:29:05 +01:00
eric miao a683b14df8 [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h
two reasons:
1. GPIO namings and their mode definitions are conceptually not part
   of the PXA register definitions

2. this is actually a temporary move in the transition of PXA2xx to
   use MFP-alike APIs (as what PXA3xx is now doing), so that legacy
   code will still work and new code can be added in step by step

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19 11:29:04 +01:00
Russell King e7b3dc7ef1 [NET] smc91x: Make smc91x use IRQ resource trigger flags
smc91x is shared between many different platforms.  Each platform needs
to specify the interrupt type, and in some cases the irq type depends
on more than just the build configuration - it depends on runtime
checks.

Rather than throwing this code into the SMC_IRQ_FLAGS definition, provide
a way for these flags to be passed via the IRQ resource itself.

Note that IRQF_TRIGGER_* constants are intentionally defined to correspond
with the IORESOURCE_IRQ_* interrupt type flags, in much the same way that
the low bits of PCI iomem resources correspond with the BAR flag bits.

Also provide a way to configure smc91x to read the IRQ flags from the
resource.  Once all platforms have been converted over (signified
by all definitions of SMC_IRQ_FLAGS being -1) SMC_IRQ_FLAGS should
be removed.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Nicolas Pitre <nico@cam.org>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
2008-01-28 13:13:19 +00:00
Russell King 8785a8fbd5 [ARM] pxa: move memory controller registers into pxa2xx-regs.h
PXA3 has a different memory controller from PXA2 platforms.  Avoid
clashing definitions by moving the PXA2 definitions to pxa2xx-regs.h

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26 15:07:54 +00:00
Russell King 16f159b1fc [ARM] pxa: only register "cpld_irq" for the correct platform
Only register the "cpld_irq" sysclass for mainstone/lubbock if we're
running on one of those platforms.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26 15:07:52 +00:00
eric miao 2f1a74e5a2 [ARM] pxa: make pxa2xx_spi driver use ssp_request()/ssp_free()
1. make pxa2xx_spi.c use ssp_request() and ssp_free() to get the common
   information of the designated SSP port.

2. remove those IRQ/memory request code, ssp_request() has done that for
   the driver

3. the SPI platform device is thus made psuedo, no resource (memory/IRQ)
   has to be defined, all will be retreived by ssp_request()

4. introduce ssp_get_clk_div() to handle controller difference in clock
   divisor setting

5. use clk_xxx() API for clock enable/disable, and clk_get_rate() to
   handle the different SSP clock frequency between different processors

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26 15:07:52 +00:00
Kay Sievers af5ca3f4ec Driver core: change sysdev classes to use dynamic kobject names
All kobjects require a dynamically allocated name now. We no longer
need to keep track if the name is statically assigned, we can just
unconditionally free() all kobject names on cleanup.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:40 -08:00
Russell King 693d9d95d6 [ARM] pxa: move pxa_set_mode() from pxa2xx_lubbock.c to lubbock.c
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-15 18:53:47 +01:00
Russell King 46c41e62a1 [ARM] pxa: move platform devices to separate header file
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 14:28:21 +01:00
Eric Miao cd49104d99 [ARM] 4450/1: pxa: add pxa25x_init_irq() and pxa27x_init_irq()
/* should be ok this time, I aligned this patch to your arm:pxa2.mbox */

1. move pxa25x specific IRQ initialization code to pxa25x_init_irq()
and pxa27x code to pxa27x_init_irq(), remove pxa_init_irq()

2. replace all pxa_init_irq() with their PXA25x or PXA27x specific
functions

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 14:28:15 +01:00
Eric Miao 7053acbd78 [ARM] 4304/1: removes the unnecessary bit number from CKENnn_XXXX
This patch removes the unnecessary bit number from CKENnn_XXXX
definitions for PXA, so that

	CKEN0_PWM0 --> CKEN_PWM0
	CKEN1_PWM1 --> CKEN_PWM1
	...
	CKEN24_CAMERA --> CKEN_CAMERA

The reasons for the change of these defitions are:

1. they do not scale - they are currently valid for pxa2xx, but
definitely not valid for pxa3xx, e.g., pxa3xx has bit 3 for camera
instead of bit 24

2. they are unnecessary - the peripheral name within the definition
has already announced its usage, we don't need those bit numbers
to know which peripheral we are going to enable/disable clock for

3. they are inconvenient - think about this: a driver programmer
for pxa has to remember which bit in the CKEN register to turn
on/off

Another change in the patch is to make the definitions equal to its
clock bit index, so that

   #define CKEN_CAMERA  (24)

instead of

   #define CKEN_CAMERA  (1 << 24)

this change, however, will add a run-time bit shift operation in
pxa_set_cken(), but the benefit of this change is that it scales
when bit index exceeds 32, e.g., pxa3xx has two registers CKENA
and CKENB, totally 64 bit for this, suppose CAMERA clock enabling
bit is CKENB:10, one can simply define CKEN_CAMERA to be (32 + 10)
and so that pxa_set_cken() need minimum change to adapt to that.

Signed-off-by: eric miao <eric.y.miao@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-04-21 23:14:01 +01:00
Russell King 10dd5ce28d [ARM] Remove compatibility layer for ARM irqs
set_irq_chipdata -> set_irq_chip_data
get_irq_chipdata -> get_irq_chip_data
do_level_IRQ -> handle_level_irq
do_edge_IRQ -> handle_edge_irq
do_simple_IRQ -> handle_simple_irq
irqdesc -> irq_desc
irqchip -> irq_chip

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-30 12:24:47 +00:00
Russell King 2326eb985b [ARM] Fix fallout from IRQ regs changes
Some ARM platforms were still broken as a result of the IRQ register
passing changes, mostly due to a missing linux/irq.h include.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-15 13:48:37 +01:00
David Howells 40220c1a19 IRQ: Use the new typedef for interrupt handler function pointers
Use the new typedef for interrupt handler function pointers rather than
actually spelling out the full thing each time.  This was scripted with the
following small shell script:

#!/bin/sh
egrep -nHrl -e 'irqreturn_t[ 	]*[(][*]' $* |
while read i
do
    echo $i
    perl -pi -e 's/irqreturn_t\s*[(]\s*[*]\s*([_a-zA-Z0-9]*)\s*[)]\s*[(]\s*int\s*,\s*void\s*[*]\s*[)]/irq_handler_t \1/g' $i || exit $?
done

Signed-Off-By: David Howells <dhowells@redhat.com>
2006-10-09 12:19:47 +01:00
Linus Torvalds 0cd61b68c3 Initial blind fixup for arm for irq changes
Untested, but this should fix up the bulk of the totally mechanical
issues, and should make the actual detail fixing easier.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-06 10:59:54 -07:00
Richard Purdie d14b272bc6 [ARM] 3848/1: pxafb: Add option of fixing video modes and spitz QVGA mode support
Add the ability to have pxafb use only certain fixed video modes
(selected on a per platform basis). This is useful on production
hardware such as the Zaurus cxx00 models where the valid modes are
known in advance and any other modes could result in hardware damage.

Following this, add support for the cxx00 QVGA mode. Mode information
is passed to the lcd_power call to allowing the panel drivers to
configure the display hardware accordingly (corgi_lcd already contains
the functionality for the cxx00 panel).

This mirrors the setup already used by w100fb.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-02 13:33:37 +01:00
David Brownell 38c677cb9a [ARM] 3739/1: genirq updates: irq_chip, add and use irq_chip.name
Patch from David Brownell

ARM genirq cleanups/updates:

    - Start switching platforms to newer APIs
        * use "irq_chip" name, not "irqchip"
        * providing irq_chip.name

    - Show irq_chip.name in /proc/interrupts, like on x86.

This update a bit more than half of the ARM code.  The irq_chip.name
values were chosen to match docs (if I have them) or be otherwise
obvious ("FPGA", "CPLD", or matching the code).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-01 22:26:25 +01:00
Thomas Gleixner 52e405eaa9 [PATCH] ARM: fixup irqflags breakage after ARM genirq merge
The irgflags consolidation did conflict with the ARM to generic IRQ
conversion and was not applied for ARM. Fix it up.

Use the new IRQF_ constants and remove the SA_INTERRUPT define

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 17:29:22 -07:00
David Brownell 9df5db80a7 [ARM] 3534/1: add spi support to lubbock platform
Patch from David Brownell

This adds the platform device for SSP/SPI controller, and declares
the ads7846 device hooked up to it.  Not all Lubbock boards appear
to populate the connector needed to use this instead of the ucb1400
chip, but it can always be used as a temperature sensor.

In short, this is probably most useful as an example of how to
provide the configuration data used by the pxa2xx_spi driver.
(Last tested against a slightly earlier version of that driver.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-18 16:39:33 +01:00
Nicolas Pitre 946d4935fc [ARM] 3260/1: remove phys_ram from struct machine_desc (part 2)
Patch from Nicolas Pitre

This field is redundent since it must be equal to PHYS_OFFSET anyway.

Now that no code uses it anymore, mark it deprecated and remove all
initializations from the tree.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-13 20:51:52 +00:00
Todd Poynor 74ec71e161 [ARM] 3087/1: PXA2xx flash platform device conversion
Patch from Todd Poynor

Add platform devices for flash to Lubbock and Mainstone board files.
Once in place, the two existing mtd map drivers for the boards will be
converted to use a single pxa2xx map driver in the linux-mtd tree.
Take 4: flash_platform_data .map_name vs. .name cleaned up, resync with
merged irda patch context.

Signed-off-by: Todd Poynor <tpoynor@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-04 17:15:45 +00:00
Linus Torvalds 7f36b1e958 Merge master.kernel.org:/home/rmk/linux-2.6-arm 2005-11-01 21:32:14 -08:00
David Brownell 85eb226c44 [ARM] 3078/1: lubbock platform updates, mostly mmc detection
Patch from David Brownell

Lubbock updates:

  * Provide an address for the SMC91x chip that doesn't generate
    a boot-time warning (matching the EEPROM).

  * Update MMC support to (a) detect card insert/remove, and
    (b) report the readonly switch setting for SD cards.

Previously, MMC/SD cards had to be present at boot time else they
couldn't be detected.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-01 19:44:30 +00:00