For some config options (CONFIG_EXTRA_FIRMWARE, for example), the length
of a config file line can exceed the 1024 byte buffer.
Switch from fgets to compat_getline to fix. compat_getline is an
internally implimented getline work-alike for portability purposes.
Signed-off-by: Cody Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
We've now fixed IS_ENABLED() and friends to not require any special
"__enabled_" prefixed versions of the normal Kconfig options, so delete
the last traces of them being generated.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit 953742c8fe.
Dumping two lines into autoconf.h for all existing Kconfig options
results in a giant file (~16k lines) we have to process each time we
compile something. We've weaned IS_ENABLED() and similar off of
requiring the __enabled_ definitions so now we can revert the change
which caused all the extra lines.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Running `oldconfig' after any of the following configuration change:
either trivial addition, such as:
config A
bool "A"
choice
prompt "Choice ?"
depends on A
config CHOICE_B
bool "Choice B"
config CHOICE_C
bool "Choice C"
endchoice
or more tricky change:
OLD KCONFIG | NEW KCONFIG
|
| config A
| bool "A"
|
choice | choice
prompt "Choice ?" | prompt "Choice ?"
|
config CHOICE_C | config CHOICE_C
bool "Choice C" | bool "Choice C"
|
config CHOICE_D | config CHOICE_D
bool "Choice D" | bool "Choice D"
endchoice |
| config CHOICE_E
| bool "Choice E"
| depends on A
| endchoice
will not cause the choice to be considered as NEW, and thus not be
asked. The cause of this behavior is that choice's novelty are computed
statically right after the saved configuration has been read. At this
point, the new dependency's value is still unknown and asserted to be
`no'. Moreover, no update to this decision is made afterward.
Correct this by dynamically evaluating a choice's novelty, and removing the
static evaluation.
Reported-and-tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Use the xfwrite wrapper function defined in lkc.h to check the return value of
fwrite and silence these warnings.
HOSTCC scripts/kconfig/zconf.tab.o
scripts/kconfig/zconf.tab.c: In function 'header_print_comment':
/usr/src/lto/scripts/kconfig/confdata.c:551:10: warning: ignoring return value of 'fwrite', declared with attribute warn_unused_result
scripts/kconfig/zconf.tab.c: In function 'kconfig_print_comment':
/usr/src/lto/scripts/kconfig/confdata.c:467:10: warning: ignoring return value of 'fwrite', declared with attribute warn_unused_result
Signed-off-by: Peter Foley <pefoley2@verizon.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
__enabled_<sym-name> are only generated on visible or selected entries, do not
reflect the purpose of its introduction.
Fix this by always generating these entries for named symbol.
Reported-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Replace the config_is_*() macros with a variant that allows for grepping
for usage of CONFIG_* options in the code. Usage:
if (IS_ENABLED(CONFIG_NUMA))
or
#if IS_ENABLED(CONFIG_NUMA)
The IS_ENABLED() macro evaluates to 1 if the argument is set (to either 'y'
or 'm'), IS_BUILTIN() tests if the option is 'y' and IS_MODULE() test if
the option is 'm'. Only boolean and tristate options are supported.
Reviewed-by: Arnaud Lacombe <lacombar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The specialized printer for headers (espectially autoconf.h) is missing
fixup code for S_HEX symbol's "0x" prefix. As long as kconfig does not
warn for such missing prefix, this code is needed. Fix this.
In the same time, fix some nits in `header_print_symbol()'.
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Broken-by: Arnaud Lacombe <lacombar@gmail.com>
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Reported-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Make conf_write_symbol() grammar agnostic to be able to use it from different
code path. These path pass a printer callback which will print a symbol's name
and its value in different format.
conf_write_symbol()'s job become mostly only to prepare a string for the
printer. This avoid to have to pass specialized flag to generic
functions
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
[mmarek: rebased on top of de12518 (kconfig: autogenerated config_is_xxx
macro)]
Signed-off-by: Michal Marek <mmarek@suse.cz>
For strings and integers, the config_is_xxx macros are useless and
sometimes misleading:
#define CONFIG_INITRAMFS_SOURCE ""
#define config_is_initramfs_source() 1
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
this will allow to use to use
if(config_is_xxx())
if(config_is_xxx_module())
in the code instead of
#ifdef CONFIG_xxx
#ifdef CONFIG_xxx_MODULE
and now let the compiler remove the non usefull code and not the
pre-processor
as done in the mach-types for arm as exmaple
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Replacing S_TRISTATE by S_BOOLEAN is a no-op for conf_write_symbol().
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
[mmarek: Fix unused variable warning in conf_write()]
Signed-off-by: Michal Marek <mmarek@suse.cz>
AUTOCONF_INCLUDED is not checked is not used within the tree and its parent
header, `autoconf.h', is safe to be re-included.
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
This prevents the buffers being overflowed when using a config
file with a long name. PATH_MAX is used elsewhere in the same
file, so use it here as well.
Signed-off-by: Will Newton <will.newton@imgtec.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
commit 8baefd30b5 of linux-next replaced
a `switch()' statement with some `if()' statements, but left `break's
in the `switch()' statement untouched. This cause read config loop to
exit and so "make oldconfig" is not much usable (see below).
> $ make oldconfig
><snip>
> scripts/kconfig/conf --oldconfig Kconfig
> #
> # using defaults found in /boot/config-2.6.34-ccs-r1
> #
> *
> * Restart config...
> *
> *
> * General setup
> *
> Prompt for development and/or incomplete code/drivers (EXPERIMENTAL) [N/y/?] (NEW)
(I've already have "CONFIG_EXPERIMENTAL=y" in the old config file. But
that's not read here.)
This patch should fix this problem.
Signed-off-by: Naohiro Aota <naota@elisp.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
With the upcoming dynamical configuration prefix, we can no longer assume that
the prefix will start by a 'C'. As such, we can no longer hardcode this value in
the `case ...:', so replace the `switch() { ... }' statement by a more flexible
'if () { ... }' statement.
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Michal Marek <mmarek@suse.cz>
This fixes:
% gmake LKC_GENPARSER=1 menuconfig
[...]
scripts/kconfig/confdata.c:739: error: 'errno' undeclared (first use in this function)
scripts/kconfig/confdata.c:739: error: (Each undeclared identifier is reported only once
scripts/kconfig/confdata.c:739: error: for each function it appears in.)
scripts/kconfig/confdata.c:739: error: 'ENOENT' undeclared (first use in this function)
triggered on NetBSD.
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
savedefconfig failed to save the correct minimal config
when it encountered a choice marked optional.
Consider following minimal configuration:
$cat Kconfig
choice
prompt "choice"
optional
config A
bool "a"
config B
bool "b"
endchoice
$cat .config | grep -v ^#
CONFIG_A=y
$conf --savedefconfig=defconfig Kconfig
would before this fix result in an empty file, because
kconfig would assume that CONFIG_A=y is a default value.
But because the choice is optional the default is that
both A and B are =n.
Fix so we handle optional choices correct.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
This fix facilitates fwrite() in both confdata.c and expr.c, either it
succeeds in writing, or an error occurs, or the end of file is reached.
Signed-off-by: Jean Sacren <sakiwit@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
If a minimal config did not specify the value
of all choice values, the resulting configuration
could have wrong values.
Consider following example:
config M
def_bool y
option modules
choice
prompt "choice list"
config A
tristate "a"
config B
tristate "b"
endchoice
With a defconfig like this:
CONFIG_M=y
CONFIG_A=y
The resulting configuration would have
CONFIG_A=m
which was unexpected.
The problem was not not all choice values were set and thus
kconfig calculated a wrong value.
The fix is to set all choice values when we
read a defconfig files.
conf_set_all_new_symbols() is refactored such that
random choice values are now handled by a dedicated function.
And new choice values are set by set_all_choice_values().
This was not the minimal fix, but the fix that resulted
in the most readable code.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reported-by: Arve Hjønnevåg <arve@android.com>
Tested-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
savedefconfig failed to save choice symbols equal to 'y'
for tristate choices.
This resulted in this value being lost.
In particular is fixes an issue where
make ARCH=avr32 atngw100_defconfig
make ARCH=avr32 savedefconfig
cp defconfig arch/avr32/configs/atngw100_defconfig
make ARCH=avr32 atngw100_defconfig
diff -u .config .config.old
failed to produce an identical .config.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
savedefconfig will save a minimal config to a file
named "defconfig".
The config symbols are saved in the same order as
they appear in the menu structure so it should
be possible to map them to the relevant menus
if desired.
The implementation was tested against several minimal
configs for arm which was created using brute-force.
There was one regression related to default numbers
which had their valid range further limited by another symbol.
Sample:
config FOO
int "foo"
default 4
config BAR
int "bar"
range 0 FOO
If FOO is set to 3 then BAR cannot take a value higher than 3.
But the current implementation will set BAR equal to 4.
This is seldomly used and the final configuration is OK,
and the fix was non-trivial.
So it was documented in the code and left as is.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Add a a few local functions to avoid some code duplication
No functional changes.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
There seems to be a kconfig bug due to MODULES not always being
evaluated if no .config is found. Take the following Kconfig as an
example:
config MODULES
def_bool y
config FOO
def_tristate m
With no .config, the following configuration is generated:
CONFIG_MODULES=y
CONFIG_FOO=y
With an empty .config, the following:
CONFIG_MODULES=y
CONFIG_FOO=m
Tristate choice statements can also exhibit the problem, due to having an
implicit rev_dep (select) containing "m".
The problem is that MODULES is never evaluted in conf_read_simple() unless
there's a .config. The following patch fixes this.
Signed-off-by: Ulf Magnusson <ulfalizer.lkml@gmail.com>
Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Give boolean symbols a 50% chance of getting enabled, rather than 67%.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
To make it easier for module-init-tools and scripts like mkinitrd to
distinguish builtin and missing modules, install a modules.builtin file
listing all builtin modules. This is done by generating an additional
config file (tristate.conf) with tristate options set to uppercase 'Y'
or 'M'. If we source that config file, the builtin modules appear in
obj-Y.
Signed-off-by: Michal Marek <mmarek@suse.cz>
Warnings found via gcc -Wmissing-prototypes.
Signed-off-by: Trevor Keith <tsrk@tsrk.net>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Regardless of KCONFIG_AUTOCONFIG, the filename written as a Make target
into "include/config/auto.conf.cmd" was always the default one.
Of course this doesn't make it work for the Kernel kbuild system, since
there the filename is hardcoded at several places in the Makefiles.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Ingo Molnar reported that 'make randconfig' was not covering
choice blocks properly, resulting in certain config options
being left out of randconfig testing altogether.
With the following patch we:
- properly randomize choice value for normal choice blocks
- properly randomize for multi choice blocks
- added several comments to explain what is going on
The root cause of the bug was that SYMBOL_VALID was set on the
symbol representing the choice block so clearing this did
the trick initially.
But testign revealed a few more issues that is now fixed.
Reported-by: Ingo Molnar <mingo@elte.hu>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
If you use KCONFIG_ALLCONFIG (even with empty file) you get broken
allmodconfig/allyesconfig; CONFIG_MODULES gets turned off, with obvious
massive fallout.
Breakage had been introduced when conf_set_all_new_symbols() got used
for allmodconfig et.al.
What happens is that sym_calc_value(modules_sym) done in
conf_read_simple() sets SYMBOL_VALID on both modules_sym and MODULES.
When we get to conf_set_all_new_symbols(), we set sym->def[S_DEF_USER]
on everything, but it has no effect on sym->curr for the symbols that
already have SYMBOL_VALID - these are stuck.
Solution: use sym_clear_all_valid() in there. Note that it makes
reevaluation of modules_sym redundant - sym_clear_all_valid() will do
that itself.
[ Fixes http://bugzilla.kernel.org/show_bug.cgi?id=11512, says Alexey ]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit f072181e64 ("kconfig: drop the
""trying to assign nonexistent symbol" warning") simply dropped the
warnings, but it does a little more than that, it also marks the current
.config as needed saving, so add this back.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
They really stand out now that make *config is less chatty - and
they are generally ignored - so drop them.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Adrian Bunk <bunk@kernel.org>
Add conf_set_all_new_symbols() which set all symbols (which don't have a
value yet) to a specifed value.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Rename E_CHOICE to E_LIST to explicitly add support for expression
lists. Add a helper macro expr_list_for_each_sym to more easily iterate
over the list.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
We had macros named the same as a set of enumeration values.
It is legal code but very confusing to read - so rename
the macros from E_* to EXPR_*
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Allow config variables in .config to override earlier ones in the same
file. In other words,
# CONFIG_SECURITY is not defined
CONFIG_SECURITY=y
will activate it. This makes it a bit easier to do
cat original-config myconfig myconfig2 ... >.config;
and run *config as expected.
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cody Schafer