nvme_rdma_alloc_tagset() preallocates a big buffer for the IO SGL based
on SG_CHUNK_SIZE.
Modern DMA engines are often capable of dealing with very big segments so
the SG_CHUNK_SIZE is often too big. SG_CHUNK_SIZE results in a static 4KB
SGL allocation per command.
If a controller has lots of deep queues, preallocation for the sg list can
consume substantial amounts of memory. For nvme-rdma, nr_hw_queues can be
128 and each queue's depth 128. This means the resulting preallocation
for the data SGL is 128*128*4K = 64MB per controller.
Switch to runtime allocation for SGL for lists longer than 2 entries. This
is the approach used by NVMe PCI so it should be reasonable for NVMeOF as
well. Runtime SGL allocation has always been the case for the legacy I/O
path so this is nothing new.
The preallocated small SGL depends on SG_CHAIN so if the ARCH doesn't
support SG_CHAIN, use only runtime allocation for the SGL.
We didn't notice of a performance degradation, since for small IOs we'll
use the inline SG and for the bigger IOs the allocation of a bigger SGL
from slab is fast enough.
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
-----BEGIN PGP SIGNATURE-----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=oyE3
-----END PGP SIGNATURE-----
Merge tag 'for-5.5/drivers-post-20191122' of git://git.kernel.dk/linux-block
Pull additional block driver updates from Jens Axboe:
"Here's another block driver update, done to avoid conflicts with the
zoned changes coming next.
This contains:
- Prepare SCSI sd for zone open/close/finish support
- Small NVMe pull request
- hwmon support (Akinobu)
- add new co-maintainer (Christoph)
- work-around for a discard issue on non-conformant drives
(Eduard)
- Small nbd leak fix"
* tag 'for-5.5/drivers-post-20191122' of git://git.kernel.dk/linux-block:
nbd: prevent memory leak
nvme: hwmon: add quirk to avoid changing temperature threshold
nvme: hwmon: provide temperature min and max values for each sensor
nvmet: add another maintainer
nvme: Discard workaround for non-conformant devices
nvme: Add hardware monitoring support
scsi: sd_zbc: add zone open, close, and finish support
-----BEGIN PGP SIGNATURE-----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=i0jf
-----END PGP SIGNATURE-----
Merge tag 'for-5.5/drivers-20191121' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"Here are the main block driver updates for 5.5. Nothing major in here,
mostly just fixes. This contains:
- a set of bcache changes via Coly
- MD changes from Song
- loop unmap write-zeroes fix (Darrick)
- spelling fixes (Geert)
- zoned additions cleanups to null_blk/dm (Ajay)
- allow null_blk online submit queue changes (Bart)
- NVMe changes via Keith, nothing major here either"
* tag 'for-5.5/drivers-20191121' of git://git.kernel.dk/linux-block: (56 commits)
Revert "bcache: fix fifo index swapping condition in journal_pin_cmp()"
drivers/md/raid5-ppl.c: use the new spelling of RWH_WRITE_LIFE_NOT_SET
drivers/md/raid5.c: use the new spelling of RWH_WRITE_LIFE_NOT_SET
bcache: don't export symbols
bcache: remove the extra cflags for request.o
bcache: at least try to shrink 1 node in bch_mca_scan()
bcache: add idle_max_writeback_rate sysfs interface
bcache: add code comments in bch_btree_leaf_dirty()
bcache: fix deadlock in bcache_allocator
bcache: add code comment bch_keylist_pop() and bch_keylist_pop_front()
bcache: deleted code comments for dead code in bch_data_insert_keys()
bcache: add more accurate error messages in read_super()
bcache: fix static checker warning in bcache_device_free()
bcache: fix a lost wake-up problem caused by mca_cannibalize_lock
bcache: fix fifo index swapping condition in journal_pin_cmp()
md/raid10: prevent access of uninitialized resync_pages offset
md: avoid invalid memory access for array sb->dev_roles
md/raid1: avoid soft lockup under high load
null_blk: add zone open, close, and finish support
dm: add zone open, close and finish support
...
This adds a new quirk NVME_QUIRK_NO_TEMP_THRESH_CHANGE to avoid changing
the value of the temperature threshold feature for specific devices that
show undesirable behavior.
Guenter reported:
"On my Intel NVME drive (SSDPEKKW512G7), writing any minimum limit on the
Composite temperature sensor results in a temperature warning, and that
warning is sticky until I reset the controller.
It doesn't seem to matter which temperature I write; writing -273000 has
the same result."
The Intel NVMe has the latest firmware version installed, so this isn't
a problem that was ever fixed.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Jean Delvare <jdelvare@suse.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
According to the NVMe specification, the over temperature threshold and
under temperature threshold features shall be implemented for Composite
Temperature if a non-zero WCTEMP field value is reported in the Identify
Controller data structure. The features are also implemented for all
implemented temperature sensors (i.e., all Temperature Sensor fields that
report a non-zero value).
This provides the over temperature threshold and under temperature
threshold for each sensor as temperature min and max values of hwmon
sysfs attributes.
The WCTEMP is already provided as a temperature max value for Composite
Temperature, but this change isn't incompatible. Because the default
value of the over temperature threshold for Composite Temperature is
the WCTEMP.
Now the alarm attribute for Composite Temperature indicates one of the
temperature is outside of a temperature threshold. Because there is only
a single bit in Critical Warning field that indicates a temperature is
outside of a threshold.
Example output from the "sensors" command:
nvme-pci-0100
Adapter: PCI adapter
Composite: +33.9°C (low = -273.1°C, high = +69.8°C)
(crit = +79.8°C)
Sensor 1: +34.9°C (low = -273.1°C, high = +65261.8°C)
Sensor 2: +31.9°C (low = -273.1°C, high = +65261.8°C)
Sensor 5: +47.9°C (low = -273.1°C, high = +65261.8°C)
This also adds helper macros for kelvin from/to milli Celsius conversion,
and replaces the repeated code in hwmon.c.
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Jean Delvare <jdelvare@suse.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Users observe IOMMU related errors when performing discard on nvme from
non-compliant nvme devices reading beyond the end of the DMA mapped
ranges to discard.
Two different variants of this behavior have been observed: SM22XX
controllers round up the read size to a multiple of 512 bytes, and Phison
E12 unconditionally reads the maximum discard size allowed by the spec
(256 segments or 4kB).
Make nvme_setup_discard unconditionally allocate the maximum DSM buffer
so the driver DMA maps a memory range that will always succeed.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=202665 many
Signed-off-by: Eduard Hasenleithner <eduard@hasenleithner.at>
[changelog, use existing define, kernel coding style]
Signed-off-by: Keith Busch <kbusch@kernel.org>
nvme devices report temperature information in the controller information
(for limits) and in the smart log. Currently, the only means to retrieve
this information is the nvme command line interface, which requires
super-user privileges.
At the same time, it would be desirable to be able to use NVMe temperature
information for thermal control.
This patch adds support to read NVMe temperatures from the kernel using the
hwmon API and adds temperature zones for NVMe drives. The thermal subsystem
can use this information to set thermal policies, and userspace can access
it using libsensors and/or the "sensors" command.
Example output from the "sensors" command:
nvme0-pci-0100
Adapter: PCI adapter
Composite: +39.0°C (high = +85.0°C, crit = +85.0°C)
Sensor 1: +39.0°C
Sensor 2: +41.0°C
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Keith Busch <kbusch@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl3F+DIQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpkVmD/9FIa092Q6obga0RqA16GlbI85tgtNyRFZU
neIO/g9R3G/uBTGbiUeXHXHDz9CqUXIRYX7pmI2u0b07iGLRz8oUsOsgyVEfCMen
VitqwkJJAZ9j9OifyKpLYCZX9ulVDWX5hEz/vm2cNWDkjCbOpXvRuQmkXEzp7RNM
F7K25PpGLvJHfqC90q9FXXxNDlB2i1M/rh5I7eUqhb6rHmzfJGKCd+H80t+REoB1
iXAygPj86agQKLOUKZtJjXUjq9Ol/0FD+OKY+eP3EfVv/FJvIeWWYe78WplxJpRD
BYb9dhLMCSo619WVVy4hNYCPjSfPKVT2cO5QJmVRpgOI1urFuTNgNoIiw06AgvkZ
09vrlrJZ5A7eFEppuAFQC4WRYKWCQCQfq8wxt2iGUivXgHfskjJ7qJz1Mh5Nlxsr
JGm1hSVw9UCBzjqC75K2CR+vVt4T8ovEaizPFvzVj6lQ0lRTmSchisxbXzTdevOn
kFvBOntBdpeSq/CwZ0x5PDP4AbRsgH3ny47LCJoEpFZlxlOLuEB/dAx564dn6ZgZ
rRz6mKU7rlO7brrkW+DbRZ0XiOn5qzN6FrcSGX1DBzc4+hMus/5PPjv8Gk+Wo1PU
388mu6N6DObSjw1ij1AqkwyzudmbrziKM4isJY4I72I0YGSq9cuG5VXgM2GqbGlU
XXpzsu8pSw==
=8B/z
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2019-11-08' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Two NVMe device removal crash fixes, and a compat fixup for for an
ioctl that was introduced in this release (Anton, Charles, Max - via
Keith)
- Missing error path mutex unlock for drbd (Dan)
- cgroup writeback fixup on dead memcg (Tejun)
- blkcg online stats print fix (Tejun)
* tag 'for-linus-2019-11-08' of git://git.kernel.dk/linux-block:
cgroup,writeback: don't switch wbs immediately on dead wbs if the memcg is dead
block: drbd: remove a stray unlock in __drbd_send_protocol()
blkcg: make blkcg_print_stat() print stats only for online blkgs
nvme: change nvme_passthru_cmd64 to explicitly mark rsvd
nvme-multipath: fix crash in nvme_mpath_clear_ctrl_paths
nvme-rdma: fix a segmentation fault during module unload
nvme_mpath_clear_ctrl_paths() iterates through
the ctrl->namespaces list while holding ctrl->scan_lock.
This does not seem to be the correct way of protecting
from concurrent list modification.
Specifically, nvme_scan_work() sorts ctrl->namespaces
AFTER unlocking scan_lock.
This may result in the following (rare) crash in ctrl disconnect
during scan_work:
BUG: kernel NULL pointer dereference, address: 0000000000000050
Oops: 0000 [#1] SMP PTI
CPU: 0 PID: 3995 Comm: nvme 5.3.5-050305-generic
RIP: 0010:nvme_mpath_clear_current_path+0xe/0x90 [nvme_core]
...
Call Trace:
nvme_mpath_clear_ctrl_paths+0x3c/0x70 [nvme_core]
nvme_remove_namespaces+0x35/0xe0 [nvme_core]
nvme_do_delete_ctrl+0x47/0x90 [nvme_core]
nvme_sysfs_delete+0x49/0x60 [nvme_core]
dev_attr_store+0x17/0x30
sysfs_kf_write+0x3e/0x50
kernfs_fop_write+0x11e/0x1a0
__vfs_write+0x1b/0x40
vfs_write+0xb9/0x1a0
ksys_write+0x67/0xe0
__x64_sys_write+0x1a/0x20
do_syscall_64+0x5a/0x130
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f8d02bfb154
Fix:
After taking scan_lock in nvme_mpath_clear_ctrl_paths()
down_read(&ctrl->namespaces_rwsem) as well to make list traversal safe.
This will not cause deadlocks because taking scan_lock never happens
while holding the namespaces_rwsem.
Moreover, scan work downs namespaces_rwsem in the same order.
Alternative: sort ctrl->namespaces in nvme_scan_work()
while still holding the scan_lock.
This would leave nvme_mpath_clear_ctrl_paths() without correct protection
against ctrl->namespaces modification by anyone other than scan_work.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
In case there are controllers that are not associated with any RDMA
device (e.g. during unsuccessful reconnection) and the user will unload
the module, these controllers will not be freed and will access already
freed memory. The same logic appears in other fabric drivers as well.
Fixes: 87fd125344 ("nvme-rdma: remove redundant reference between ib_device and tagset")
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Check validity of offset into ANA log buffer before accessing
nvme_ana_group_desc. This check ensures the size of ANA log buffer >=
offset + sizeof(nvme_ana_group_desc)
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Prabhath Sajeepa <psajeepa@purestorage.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Introduce the new helper function nvme_lba_to_sect() to convert a device
logical block number to a 512B sector number. Use this new helper in
obvious places, cleaning up the code.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rename nvme_block_nr() to nvme_sect_to_lba() and use SECTOR_SHIFT
instead of its hard coded value 9. Also add a comment to decribe this
helper.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
nvme_cleanup_cmd should be called for each call to nvme_setup_cmd
(symmetrical functions). Move the call for nvme_cleanup_cmd to the common
core layer and call it during nvme_complete_rq for the good flow. For
error flow, each transport will call nvme_cleanup_cmd independently. Also
take care of a special case of path failure, where we call
nvme_complete_rq without doing nvme_setup_cmd.
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix the status code of canceled requests initiated by the host according
to TP4028 (Status Code 0x371):
"Command Aborted By host: The command was aborted as a result of host
action (e.g., the host disconnected the Fabric connection)."
Also in a multipath environment, unless otherwise specified, errors of
this type (path related) should be retried using a different path, if
one is available.
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This function improves code readability and reduces code duplication.
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Code today only clears the association_id if a Disconnect LS is transmit.
Remove ambiguity and unconditionally clear the association_id if the
association has been terminated.
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Change wording on a couple of messages to clarify what happened.
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Set the new category field in the FC-NVME CMND_IU based on queue number.
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Sync sources with revised structure and field names to correspond with
FC-NVME-2 header sync-up.
Tested interoperability with success:
- prior initiator with new target
- prior target with new initiator
- new on new
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull networking fixes from David Miller:
1) Fix free/alloc races in batmanadv, from Sven Eckelmann.
2) Several leaks and other fixes in kTLS support of mlx5 driver, from
Tariq Toukan.
3) BPF devmap_hash cost calculation can overflow on 32-bit, from Toke
Høiland-Jørgensen.
4) Add an r8152 device ID, from Kazutoshi Noguchi.
5) Missing include in ipv6's addrconf.c, from Ben Dooks.
6) Use siphash in flow dissector, from Eric Dumazet. Attackers can
easily infer the 32-bit secret otherwise etc.
7) Several netdevice nesting depth fixes from Taehee Yoo.
8) Fix several KCSAN reported errors, from Eric Dumazet. For example,
when doing lockless skb_queue_empty() checks, and accessing
sk_napi_id/sk_incoming_cpu lockless as well.
9) Fix jumbo packet handling in RXRPC, from David Howells.
10) Bump SOMAXCONN and tcp_max_syn_backlog values, from Eric Dumazet.
11) Fix DMA synchronization in gve driver, from Yangchun Fu.
12) Several bpf offload fixes, from Jakub Kicinski.
13) Fix sk_page_frag() recursion during memory reclaim, from Tejun Heo.
14) Fix ping latency during high traffic rates in hisilicon driver, from
Jiangfent Xiao.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (146 commits)
net: fix installing orphaned programs
net: cls_bpf: fix NULL deref on offload filter removal
selftests: bpf: Skip write only files in debugfs
selftests: net: reuseport_dualstack: fix uninitalized parameter
r8169: fix wrong PHY ID issue with RTL8168dp
net: dsa: bcm_sf2: Fix IMP setup for port different than 8
net: phylink: Fix phylink_dbg() macro
gve: Fixes DMA synchronization.
inet: stop leaking jiffies on the wire
ixgbe: Remove duplicate clear_bit() call
Documentation: networking: device drivers: Remove stray asterisks
e1000: fix memory leaks
i40e: Fix receive buffer starvation for AF_XDP
igb: Fix constant media auto sense switching when no cable is connected
net: ethernet: arc: add the missed clk_disable_unprepare
igb: Enable media autosense for the i350.
igb/igc: Don't warn on fatal read failures when the device is removed
tcp: increase tcp_max_syn_backlog max value
net: increase SOMAXCONN to 4096
netdevsim: Fix use-after-free during device dismantle
...
groups_only mode in nvme_read_ana_log() is no longer used: remove it.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The following scenario results in an IO hang:
1) ctrl completes a request with NVME_SC_ANA_TRANSITION.
NVME_NS_ANA_PENDING bit in ns->flags is set and ana_work is triggered.
2) ana_work: nvme_read_ana_log() tries to get the ANA log page from the ctrl.
This fails because ctrl disconnects.
Therefore nvme_update_ns_ana_state() is not called
and NVME_NS_ANA_PENDING bit in ns->flags is not cleared.
3) ctrl reconnects: nvme_mpath_init(ctrl,...) calls
nvme_read_ana_log(ctrl, groups_only=true).
However, nvme_update_ana_state() does not update namespaces
because nr_nsids = 0 (due to groups_only mode).
4) scan_work calls nvme_validate_ns() finds the ns and re-validates OK.
Result:
The ctrl is now live but NVME_NS_ANA_PENDING bit in ns->flags is still set.
Consequently ctrl will never be considered a viable path by __nvme_find_path().
IO will hang if ctrl is the only or the last path to the namespace.
More generally, while ctrl is reconnecting, its ANA state may change.
And because nvme_mpath_init() requests ANA log in groups_only mode,
these changes are not propagated to the existing ctrl namespaces.
This may result in a mal-function or an IO hang.
Solution:
nvme_mpath_init() will nvme_read_ana_log() with groups_only set to false.
This will not harm the new ctrl case (no namespaces present),
and will make sure the ANA state of namespaces gets updated after reconnect.
Note: Another option would be for nvme_mpath_init() to invoke
nvme_parse_ana_log(..., nvme_set_ns_ana_state) for each existing namespace.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Busy polling usually runs without locks.
Let's use skb_queue_empty_lockless() instead of skb_queue_empty()
Also uses READ_ONCE() in __skb_try_recv_datagram() to address
a similar potential problem.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The .ioctl and .compat_ioctl file operations have the same prototype so
they can both point to the same function, which works great almost all
the time when all the commands are compatible.
One exception is the s390 architecture, where a compat pointer is only
31 bit wide, and converting it into a 64-bit pointer requires calling
compat_ptr(). Most drivers here will never run in s390, but since we now
have a generic helper for it, it's easy enough to use it consistently.
I double-checked all these drivers to ensure that all ioctl arguments
are used as pointers or are ignored, but are not interpreted as integer
values.
Acked-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: David Sterba <dsterba@suse.com>
Acked-by: Darren Hart (VMware) <dvhart@infradead.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In the current code, the nvme is using a fixed 4k PRP entry size,
but if the kernel use a page size which is more than 4k, we should
consider the situation that the bv_offset may be larger than the
dev->ctrl.page_size. Otherwise we may miss setting the prp2 and then
cause the command can't be executed correctly.
Fixes: dff824b2aa ("nvme-pci: optimize mapping of small single segment requests")
Cc: stable@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
During nvme_tcp_setup_cmd_pdu error flow, one must call nvme_cleanup_cmd
since it's symmetric to nvme_setup_cmd.
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The access to sk->sk_ll_usec should be hidden behind
CONFIG_NET_RX_BUSY_POLL like the definition of sk_ll_usec.
Put access to ->sk_ll_usec behind CONFIG_NET_RX_BUSY_POLL.
Fixes: 1a9460cef5 ("nvme-tcp: support simple polling")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Prevent simultaneous controller disabling/enabling tasks from interfering
with each other through a function to wait until the task successfully
transitioned the controller to the RESETTING state. This ensures disabling
the controller will not be interrupted by another reset path, otherwise
a concurrent reset may leave the controller in the wrong state.
Tested-by: Edmund Nadolski <edmund.nadolski@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
A paused controller is doing critical internal activation work in the
background. Prevent subsequent controller resets from occurring during
this period by setting the controller state to RESETTING first. A helper
function, nvme_try_sched_reset_work(), is introduced for these paths so
they may continue with scheduling the reset_work after they've completed
their uninterruptible critical section.
Tested-by: Edmund Nadolski <edmund.nadolski@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
A controller in the resetting state has not yet completed its recovery
actions. The pci and fc transports were already handling this, so update
the remaining transports to not attempt additional recovery in this
state. Instead, just restart the request timer.
Tested-by: Edmund Nadolski <edmund.nadolski@intel.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The admin only state was intended to fence off actions that don't
apply to a non-IO capable controller. The only actual user of this is
the scan_work, and pci was the only transport to ever set this state.
The consequence of having this state is placing an additional burden on
every other action that applies to both live and admin only controllers.
Remove the admin only state and place the admin only burden on the only
place that actually cares: scan_work.
This also prepares to make it easier to temporarily pause a LIVE state
so that we don't need to remember which state the controller had been in
prior to the pause.
Tested-by: Edmund Nadolski <edmund.nadolski@intel.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
If a controller becomes degraded after a reset, we will not be able to
perform any IO. We currently teardown previously created request
queues and namespaces, but we had kept the unusable tagset. Free
it after all queues using it have been released.
Tested-by: Edmund Nadolski <edmund.nadolski@intel.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Commit 7fd8930f26
"nvme: add a common helper to read Identify Controller data"
has re-introduced an issue that we have attempted to work around in the
past, in commit a310acd7a7 ("NVMe: use split lo_hi_{read,write}q").
The problem is that some PCIe NVMe controllers do not implement 64-bit
outbound accesses correctly, which is why the commit above switched
to using lo_hi_[read|write]q for all 64-bit BAR accesses occuring in
the code.
In the mean time, the NVMe subsystem has been refactored, and now calls
into the PCIe support layer for NVMe via a .reg_read64() method, which
fails to use lo_hi_readq(), and thus reintroduces the problem that the
workaround above aimed to address.
Given that, at the moment, .reg_read64() is only used to read the
capability register [which is known to tolerate split reads], let's
switch .reg_read64() to lo_hi_readq() as well.
This fixes a boot issue on some ARM boxes with NVMe behind a Synopsys
DesignWare PCIe host controller.
Fixes: 7fd8930f26 ("nvme: add a common helper to read Identify Controller data")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
nvme_update_formats may fail to revalidate the namespace and
attempt to remove the namespace. This may lead to a deadlock
as nvme_ns_remove will attempt to acquire the subsystem lock
which is already acquired by the passthru command with effects.
Move the invalid namepsace removal to after the passthru command
releases the subsystem lock.
Reported-by: Judy Brock <judy.brock@samsung.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Pull NVMe changes from Sagi:
"This set consists of various fixes and cleanups:
- controller removal race fix from Balbir
- quirk additions from Gabriel and Jian-Hong
- nvme-pci power state save fix from Mario
- Add 64bit user commands (for 64bit registers) from Marta
- nvme-rdma/nvme-tcp fixes from Max, Mark and Me
- Minor cleanups and nits from James, Dan and John"
* 'nvme-5.4' of git://git.infradead.org/nvme:
nvme-rdma: fix possible use-after-free in connect timeout
nvme: Move ctrl sqsize to generic space
nvme: Add ctrl attributes for queue_count and sqsize
nvme: allow 64-bit results in passthru commands
nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T
nvmet-tcp: remove superflous check on request sgl
Added QUIRKs for ADATA XPG SX8200 Pro 512GB
nvme-rdma: Fix max_hw_sectors calculation
nvme: fix an error code in nvme_init_subsystem()
nvme-pci: Save PCI state before putting drive into deepest state
nvme-tcp: fix wrong stop condition in io_work
nvme-pci: Fix a race in controller removal
nvmet: change ppl to lpp
If the connect times out, we may have already destroyed the
queue in the timeout handler, so test if the queue is still
allocated in the connect error handler.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Current controller interrogation requires a lot of guesswork
on how many io queues were created and what the io sq size is.
The numbers are dependent upon core/fabric defaults, connect
arguments, and target responses.
Add sysfs attributes for queue_count and sqsize.
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
It is not possible to get 64-bit results from the passthru commands,
what prevents from getting for the Capabilities (CAP) property value.
As a result, it is not possible to implement IOL's NVMe Conformance
test 4.3 Case 1 for Fabrics targets [1] (page 123).
This issue has been already discussed [2], but without a solution.
This patch solves the problem by adding new ioctls with a new
passthru structure, including 64-bit results. The older ioctls stay
unchanged.
[1] https://www.iol.unh.edu/sites/default/files/testsuites/nvme/UNH-IOL_NVMe_Conformance_Test_Suite_v11.0.pdf
[2] http://lists.infradead.org/pipermail/linux-nvme/2018-June/018791.html
Signed-off-by: Marta Rybczynska <marta.rybczynska@kalray.eu>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Kingston NVME SSD with firmware version E8FK11.T has no interrupt after
resume with actions related to suspend to idle. This patch applied
NVME_QUIRK_SIMPLE_SUSPEND quirk to fix this issue.
Fixes: d916b1be94 ("nvme-pci: use host managed power state for suspend")
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=204887
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Booting with default_ps_max_latency_us >6000 makes the device fail.
Also SUBNQN is NULL and gives a warning on each boot/resume.
$ nvme id-ctrl /dev/nvme0 | grep ^subnqn
subnqn : (null)
I use this device with an Acer Nitro 5 (AN515-43-R8BF) Laptop.
To be sure is not a Laptop issue only, I tested the device on
my server board with the same results.
( with 2x,4x link on the board and 4x link on a PCI-E card ).
Signed-off-by: Gabriel Craciunescu <nix.or.die@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
By default, the NVMe/RDMA driver should support max io_size of 1MiB (or
upto the maximum supported size by the HCA). Currently, one will see that
/sys/class/block/<bdev>/queue/max_hw_sectors_kb is 1020 instead of 1024.
A non power of 2 value can cause performance degradation due to
unnecessary splitting of IO requests and unoptimized allocation units.
The number of pages per MR has been fixed here, so there is no longer any
need to reduce max_sectors by 1.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
"ret" should be a negative error code here, but it's either success or
possibly uninitialized.
Fixes: 32fd90c407 ("nvme: change locking for the per-subsystem controller list")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
The action of saving the PCI state will cause numerous PCI configuration
space reads which depending upon the vendor implementation may cause
the drive to exit the deepest NVMe state.
In these cases ASPM will typically resolve the PCIe link state and APST
may resolve the NVMe power state. However it has also been observed
that this register access after quiesced will cause PC10 failure
on some device combinations.
To resolve this, move the PCI state saving to before SetFeatures has been
called. This has been proven to resolve the issue across a 5000 sample
test on previously failing disk/system combinations.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Allow the do/while statement to continue if current time
is not after the proposed time 'deadline'. Intent is to
allow loop to proceed for a specific time period. Currently
the loop, as coded, will exit after first pass.
Signed-off-by: Mark Wunderlich <mark.wunderlich@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
-----BEGIN PGP SIGNATURE-----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=aAPP
-----END PGP SIGNATURE-----
Merge tag 'for-5.4/post-2019-09-24' of git://git.kernel.dk/linux-block
Pull more block updates from Jens Axboe:
"Some later additions that weren't quite done for the first pull
request, and also a few fixes that have arrived since.
This contains:
- Kill silly pktcdvd warning on attempting to register a non-scsi
passthrough device (me)
- Use symbolic constants for the block t10 protection types, and
switch to handling it in core rather than in the drivers (Max)
- libahci platform missing node put fix (Nishka)
- Small series of fixes for BFQ (Paolo)
- Fix possible nbd crash (Xiubo)"
* tag 'for-5.4/post-2019-09-24' of git://git.kernel.dk/linux-block:
block: drop device references in bsg_queue_rq()
block: t10-pi: fix -Wswitch warning
pktcdvd: remove warning on attempting to register non-passthrough dev
ata: libahci_platform: Add of_node_put() before loop exit
nbd: fix possible page fault for nbd disk
nbd: rename the runtime flags as NBD_RT_ prefixed
block, bfq: push up injection only after setting service time
block, bfq: increase update frequency of inject limit
block, bfq: reduce upper bound for inject limit to max_rq_in_driver+1
block, bfq: update inject limit only after injection occurred
block: centralize PI remapping logic to the block layer
block: use symbolic constants for t10_pi type
User space programs like udevd may try to read to partitions at the
same time the driver detects a namespace is unusable, and may deadlock
if revalidate_disk() is called while such a process is waiting to
enter the frozen queue. On detecting a dead namespace, move the disk
revalidate after unblocking dispatchers that may be holding bd_butex.
changelog Suggested-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Balbir Singh <sblbir@amzn.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Currently t10_pi_prepare/t10_pi_complete functions are called during the
NVMe and SCSi layers command preparetion/completion, but their actual
place should be the block layer since T10-PI is a general data integrity
feature that is used by block storage protocols. Introduce .prepare_fn
and .complete_fn callbacks within the integrity profile that each type
can implement according to its needs.
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Fixed to not call queue integrity functions if BLK_DEV_INTEGRITY
isn't defined in the config.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=Qt+h
-----END PGP SIGNATURE-----
Merge tag 'for-5.4/block-2019-09-16' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- Two NVMe pull requests:
- ana log parse fix from Anton
- nvme quirks support for Apple devices from Ben
- fix missing bio completion tracing for multipath stack devices
from Hannes and Mikhail
- IP TOS settings for nvme rdma and tcp transports from Israel
- rq_dma_dir cleanups from Israel
- tracing for Get LBA Status command from Minwoo
- Some nvme-tcp cleanups from Minwoo, Potnuri and Myself
- Some consolidation between the fabrics transports for handling
the CAP register
- reset race with ns scanning fix for fabrics (move fabrics
commands to a dedicated request queue with a different lifetime
from the admin request queue)."
- controller reset and namespace scan races fixes
- nvme discovery log change uevent support
- naming improvements from Keith
- multiple discovery controllers reject fix from James
- some regular cleanups from various people
- Series fixing (and re-fixing) null_blk debug printing and nr_devices
checks (André)
- A few pull requests from Song, with fixes from Andy, Guoqing,
Guilherme, Neil, Nigel, and Yufen.
- REQ_OP_ZONE_RESET_ALL support (Chaitanya)
- Bio merge handling unification (Christoph)
- Pick default elevator correctly for devices with special needs
(Damien)
- Block stats fixes (Hou)
- Timeout and support devices nbd fixes (Mike)
- Series fixing races around elevator switching and device add/remove
(Ming)
- sed-opal cleanups (Revanth)
- Per device weight support for BFQ (Fam)
- Support for blk-iocost, a new model that can properly account cost of
IO workloads. (Tejun)
- blk-cgroup writeback fixes (Tejun)
- paride queue init fixes (zhengbin)
- blk_set_runtime_active() cleanup (Stanley)
- Block segment mapping optimizations (Bart)
- lightnvm fixes (Hans/Minwoo/YueHaibing)
- Various little fixes and cleanups
* tag 'for-5.4/block-2019-09-16' of git://git.kernel.dk/linux-block: (186 commits)
null_blk: format pr_* logs with pr_fmt
null_blk: match the type of parameter nr_devices
null_blk: do not fail the module load with zero devices
block: also check RQF_STATS in blk_mq_need_time_stamp()
block: make rq sector size accessible for block stats
bfq: Fix bfq linkage error
raid5: use bio_end_sector in r5_next_bio
raid5: remove STRIPE_OPS_REQ_PENDING
md: add feature flag MD_FEATURE_RAID0_LAYOUT
md/raid0: avoid RAID0 data corruption due to layout confusion.
raid5: don't set STRIPE_HANDLE to stripe which is in batch list
raid5: don't increment read_errors on EILSEQ return
nvmet: fix a wrong error status returned in error log page
nvme: send discovery log page change events to userspace
nvme: add uevent variables for controller devices
nvme: enable aen regardless of the presence of I/O queues
nvme-fabrics: allow discovery subsystems accept a kato
nvmet: Use PTR_ERR_OR_ZERO() in nvmet_init_discovery()
nvme: Remove redundant assignment of cq vector
nvme: Assign subsys instance from first ctrl
...
If the controller supports discovery log page change events,
we want to enable it. When we see a discovery log change event
we will send it up to userspace and expect it to handle it.
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
When we send uevents to userspace, add controller specific
environment variables to uniquly identify the controller beyond
its device name.
This will be useful to address discovery log change events by
actually verifying that the discovery controller is indeed the
same as the device that generated the event.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
AENs in general are not related to the presence of I/O queues,
so enable them regardless. Note that the only exception is that
discovery controller will not support any of the requested AENs
and nvme_enable_aen will respect that and return, so it is still
safe to enable regardless.
Note it is safe to enable AENs even before the initial namespace
scanning as we have the scan operation in a workqueue context.
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
This modifies the behavior of discovery subsystems to accept
a kato as a preparation to support discovery log change
events. This also means that now every discovery controller
will have a default kato value, and for non-persistent connections
the host needs to pass in a zero kato value (keep_alive_tmo=0).
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
The cq vector is already assigned with the correct value.
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
The namespace disk names must be unique for the lifetime of the
subsystem. This was accomplished by using their parent subsystems'
instances which were allocated independently from the controllers
connected to that subsystem. This allowed name prefixes assigned to
namespaces to match a controller from an unrelated subsystem, and has
created confusion among users examining device nodes.
Ensure a namespace's subsystem instance never clashes with a controller
instance of another subsystem by transferring the instance ownership
to the parent subsystem from the first controller discovered in that
subsystem.
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
The variable ret is being initialized with a value that is never read
and is being re-assigned immediately afterwards. The assignment is
redundant and hence can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
nvme_sync_queues currently syncs all namespace queues, but should
also sync the admin queue, if present.
Signed-off-by: Edmund Nadolski <edmund.nadolski@intel.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Current code matches subnqn and collapses all controllers to the
same subnqn to a single subsystem structure. This is good for
recognizing multiple controllers for the same subsystem. But with
the well-known discovery subnqn, the subsystems aren't truly the
same subsystem. As such, subsystem specific rules, such as no
overlap of controller id, do not apply. With today's behavior, the
check for overlap of controller id can fail, preventing the new
discovery controller from being created.
When searching for like subsystem nqn, exclude the discovery nqn
from matching. This will result in each discovery controller being
attached to a unique subsystem structure.
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
If a controller reset is racing with a namespace revalidation, the
revalidation (admin) I/O will surely fail, but we should not remove the
namespace as we will execute the I/O when the controller is back up.
Same for spurious allocation errors (return -ENOMEM).
Fix this by checking the specific error code in nvme_revalidate_disk and
if it is a transient error (for example non DNR nvme statuses or
a negative ENOMEM as allocation failure), do not remove the namespace as
it will either recover when the controller is back up and schedule
a subsequent scan, or the controller is going away and the namespaces
will be removed anyways.
This fixes a hang namespace scanning racing with a controller reset and
also sporious I/O errors in path failover coditions where the
controller reset is racing with the namespace scan work with multipath
enabled.
Reported-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Make the callers check the return status and propagate
back accordingly (casting to errno from a positive nvme status).
Also print the return status in nvme_report_ns_ids.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
right now callers of nvme_identify_ns only know that it failed,
but don't know why. Make nvme_identify_ns propagate the error back.
Because nvme_submit_sync_cmd may return a positive status code, we
make nvme_identify_ns receive the id by reference and return that
status up the call chain, but make sure not to leak positive nvme
status codes to the upper layers.
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
NVME_SC_INTERNAL should indicate an internal controller errors
and not host transport errors. These errors will propagate to
upper layers (essentially nvme core) and be interpereted as
transport errors which should not be taken into account for
namespace state or condition.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
This is a more appropriate error status for a transport error
detected by us (the host).
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
NVME_SC_ABORT_REQ means that the request was aborted due to
an abort command received. In our case, this is a transport
cancellation, so host pathing error is much more appropriate.
Also, convert NVME_SC_HOST_PATH_ERROR to BLK_STS_TRANSPORT for
such that callers can understand that the status is a transport
related error. This will be used by the ns scanning code to
understand if it got an error from the controller or that the
controller happens to be unreachable by the transport.
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Remove pointless local variable and use rq_dma_dir macro.
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
We have a fundamental issue that fabric commands use the admin_q.
The reason is, that admin-connect, register reads and writes and
admin commands cannot be guaranteed ordering while we are running
controller resets.
For example, when we reset a controller we perform:
1. disable the controller
2. teardown the admin queue
3. re-establish the admin queue
4. enable the controller
In order to perform (3), we need to unquiesce the admin queue, however
we may have some admin commands that are already pending on the
quiesced admin_q and will immediate execute when we unquiesce it before
we execute (4). The host must not send admin commands to the controller
before enabling the controller.
To fix this, we have the fabric commands (admin connect and property
get/set, but not I/O queue connect) use a separate fabrics_q and make
sure to quiesce the admin_q before we disable the controller, and
unquiesce it only after we enable the controller.
This fixes the error prints from nvmet in a controller reset storm test:
kernel: nvmet: got cmd 6 while CC.EN == 0 on qid = 0
Which indicate that the host is sending an admin command when the
controller is not enabled.
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Another issue with the Apple T2 based 2018 controllers seem to be
that they blow up (and shut the machine down) if there's a tag
collision between the IO queue and the Admin queue.
My suspicion is that they use our tags for their internal tracking
and don't mix them with the queue id. They also seem to not like
when tags go beyond the IO queue depth, ie 128 tags.
This adds a quirk that marks tags 0..31 of the IO queue reserved
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Based on reverse engineering and original patch by
Paul Pawlowski <paul@mrarm.io>
This adds support for Apple weird implementation of NVME in their
2018 or later machines. It accounts for the twice-as-big SQ entries
for the IO queues, and the fact that only interrupt vector 0 appears
to function properly.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
The size of a submission queue element should always be 6 (64 bytes)
by spec.
However some controllers such as Apple's are not properly implementing
the standard and require a different size.
This provides the ground work for the subsequent quirks for these
controllers.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
This will make it easier to handle variable queue entry sizes
later. No functional change.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
When native multipathing is enabled we cannot enable blktrace for
the underlying paths, so any completion is never traced.
Signed-off-by: Hannes Reinecke <hare@suse.com>
[fixed-up by Mikhail for non-multipath-build]
Signed-off-by: Mikhail Skorzhinskii <mskorzhinskiy@solarflare.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
ANA log parsing invokes nvme_update_ana_state() per ANA group desc.
This updates the state of namespaces with nsids in desc->nsids[].
Both ctrl->namespaces list and desc->nsids[] array are sorted by nsid.
Hence nvme_update_ana_state() performs a single walk over ctrl->namespaces:
- if current namespace matches the current desc->nsids[n],
this namespace is updated, and n is incremented.
- the process stops when it encounters the end of either
ctrl->namespaces end or desc->nsids[]
In case desc->nsids[n] does not match any of ctrl->namespaces,
the remaining nsids following desc->nsids[n] will not be updated.
Such situation was considered abnormal and generated WARN_ON_ONCE.
However ANA log MAY contain nsids not (yet) found in ctrl->namespaces.
For example, lets consider the following scenario:
- nvme0 exposes namespaces with nsids = [2, 3] to the host
- a new namespace nsid = 1 is added dynamically
- also, a ANA topology change is triggered
- NS_CHANGED aen is generated and triggers scan_work
- before scan_work discovers nsid=1 and creates a namespace, a NOTICE_ANA
aen was issues and ana_work receives ANA log with nsids=[1, 2, 3]
Result: ana_work fails to update ANA state on existing namespaces [2, 3]
Solution:
Change the way nvme_update_ana_state() namespace list walk
checks the current namespace against desc->nsids[n] as follows:
a) ns->head->ns_id < desc->nsids[n]: keep walking ctrl->namespaces.
b) ns->head->ns_id == desc->nsids[n]: match, update the namespace
c) ns->head->ns_id >= desc->nsids[n]: skip to desc->nsids[n+1]
This enables correct operation in the scenario described above.
This also allows ANA log to contain nsids currently invisible
to the host, i.e. inactive nsids.
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
TOS provide clients the ability to segregate traffic flows for
different type of data.
One of the TOS usage is bandwidth management which allows setting bandwidth
limits for QoS classes, e.g. 80% bandwidth to controllers at QoS class A
and 20% to controllers at QoS class B.
usage examples:
nvme connect --tos=0 --transport=tcp --traddr=10.0.1.1 --nqn=test-nvme
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
For RDMA transports, TOS is an extension of IB QoS to provide clients
the ability to segregate traffic flows for different type of data.
RDMA CM abstract it for ULPs using rdma_set_service_type().
Internally, each traffic flow is represented by a connection with all of
its independent resources like that of a normal connection, and is
differentiated by service type. In other words, there can be multiple qp
connections between an IP pair and each supports a unique service type.
One of the TOS usage is bandwidth management which allows setting bandwidth
limits for QoS classes, e.g. 80% bandwidth to controllers at QoS class A
and 20% to controllers at QoS class B.
Note: In addition to the TOS configuration, QOS must be configured on the
relevant HCA on the target (send RDMA commands) and initiator to effect
the traffic.
usage examples:
nvme connect --tos=0 --transport=rdma --traddr=10.0.1.1 --nqn=test-nvme
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
TOS is user-defined and needs to be configured via nvme-cli.
It must be set before initiating any traffic and once set the TOS
cannot be changed.
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Four different fields are in CDWs of Get LBA Status command which means
it would be great if we can see in detail when tracing.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Simple polling support via socket busy_poll interface.
Although we do not shutdown interrupts but simply hammer
the socket poll, we can sometimes find completions faster
than the normal interrupt driven RX path.
We add per queue nr_cqe counter that resets every time
RX path is invoked such that .poll callback can return it
to stay consistent with the semantics.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
The tcp host module is now taking those APIs from crypto ahash:
(1) crypto_ahash_final()
(2) crypto_ahash_digest()
(3) crypto_alloc_ahash()
nvme-tcp should depends on CRYPTO_CRC32C.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
All seem to call it with ctrl->cap so no need to pass it
at all.
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
nvme_enable_ctrl reads the cap register right after, so
no need to do that locally in the transport driver. Have
sqsize setting in nvme_init_identify.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
No need to use a stack cap variable.
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Using socket specific read_sock() calls instead of directly calling
tcp_read_sock() helps lld module registered handlers if any, to be called
from nvme-tcp host.
This patch therefore replaces the tcp_read_sock() with socket specific
prot_ops.
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
One of the components in LiteON CL1 device has limitations that
can be encountered based upon boundary race conditions using the
nvme bus specific suspend to idle flow.
When this situation occurs the drive doesn't resume properly from
suspend-to-idle.
LiteON has confirmed this problem and fixed in the next firmware
version. As this firmware is already in the field, avoid running
nvme specific suspend to idle flow.
Fixes: d916b1be94 ("nvme-pci: use host managed power state for suspend")
Link: http://lists.infradead.org/pipermail/linux-nvme/2019-July/thread.html
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Charles Hyde <charles.hyde@dellteam.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 1b1031ca63 ("nvme: validate cntlid during controller initialisation")
introduced a validation for controllers with duplicate cntlid that runs
on nvme_init_subsystem(). The problem is that the validation relies on
ctrl->cntlid, and this value is assigned (from id_ctrl value) after the
call for nvme_init_subsystem() in nvme_init_identify() for non-fabrics
scenario. That leads to ctrl->cntlid always being 0 in case we have a
physical set of controllers in the same subsystem.
This patch fixes that by loading the discovered cntlid id_ctrl value into
ctrl->cntlid before the subsystem initialization, only for the non-fabrics
case. The patch was tested with emulated nvme devices (qemu) having two
controllers in a single subsystem. Without the patch, we couldn't make
it work failing in the duplicate check; when running with the patch, we
could see the subsystem holding both controllers.
For the fabrics case we see ctrl->cntlid has a more intricate relation
with the admin connect, so we didn't change that.
Fixes: 1b1031ca63 ("nvme: validate cntlid during controller initialisation")
Signed-off-by: Guilherme G. Piccoli <gpiccoli@canonical.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
nvme_state_set_live() making a path available triggers requeue_work
in order to resubmit requests that ended up on requeue_list when no
paths were available.
This requeue_work may race with concurrent nvme_ns_head_make_request()
that do not observe the live path yet.
Such concurrent requests may by made by either:
- New IO submission.
- Requeue_work triggered by nvme_failover_req() or another ana_work.
A race may cause requeue_work capture the state of requeue_list before
more requests get onto the list. These requests will stay on the list
forever unless requeue_work is triggered again.
In order to prevent such race, nvme_state_set_live() should
synchronize_srcu(&head->srcu) before triggering the requeue_work and
prevent nvme_ns_head_make_request referencing an old snapshot of the
path list.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=f6DS
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2019-08-17' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A collection of fixes that should go into this series. This contains:
- Revert of the REQ_NOWAIT_INLINE and associated dio changes. There
were still corner cases there, and even though I had a solution for
it, it's too involved for this stage. (me)
- Set of NVMe fixes (via Sagi)
- io_uring fix for fixed buffers (Anthony)
- io_uring defer issue fix (Jackie)
- Regression fix for queue sync at exit time (zhengbin)
- xen blk-back memory leak fix (Wenwen)"
* tag 'for-linus-2019-08-17' of git://git.kernel.dk/linux-block:
io_uring: fix an issue when IOSQE_IO_LINK is inserted into defer list
block: remove REQ_NOWAIT_INLINE
io_uring: fix manual setup of iov_iter for fixed buffers
xen/blkback: fix memory leaks
blk-mq: move cancel of requeue_work to the front of blk_exit_queue
nvme-pci: Fix async probe remove race
nvme: fix controller removal race with scan work
nvme-rdma: fix possible use-after-free in connect error flow
nvme: fix a possible deadlock when passthru commands sent to a multipath device
nvme-core: Fix extra device_put() call on error path
nvmet-file: fix nvmet_file_flush() always returning an error
nvmet-loop: Flush nvme_delete_wq when removing the port
nvmet: Fix use-after-free bug when a port is removed
nvme-multipath: revalidate nvme_ns_head gendisk in nvme_validate_ns
One of the modifications made by commit d916b1be94 ("nvme-pci: use
host managed power state for suspend") was adding a pci_save_state()
call to nvme_suspend() so as to instruct the PCI bus type to leave
devices handled by the nvme driver in D0 during suspend-to-idle.
That was done with the assumption that ASPM would transition the
device's PCIe link into a low-power state when the device became
inactive. However, if ASPM is disabled for the device, its PCIe
link will stay in L0 and in that case commit d916b1be94 is likely
to cause the energy used by the system while suspended to increase.
Namely, if the device in question works in accordance with the PCIe
specification, putting it into D3hot causes its PCIe link to go to
L1 or L2/L3 Ready, which is lower-power than L0. Since the energy
used by the system while suspended depends on the state of its PCIe
link (as a general rule, the lower-power the state of the link, the
less energy the system will use), putting the device into D3hot
during suspend-to-idle should be more energy-efficient that leaving
it in D0 with disabled ASPM.
For this reason, avoid leaving NVMe devices with disabled ASPM in D0
during suspend-to-idle. Instead, shut them down entirely and let
the PCI bus type put them into D3.
Fixes: d916b1be94 ("nvme-pci: use host managed power state for suspend")
Link: https://lore.kernel.org/linux-pm/2763495.NmdaWeg79L@kreacher/T/#t
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Now that blk_rq_map_kern can map both kmem and vmem, move internal
metadata mapping down to the lower level driver.
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hans Holmberg <hans@owltronix.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the redundant sync handling interface and wait for a completion in
the lightnvm core instead.
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hans Holmberg <hans@owltronix.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_mq_tagset_wait_completed_request() has been applied for waiting
for completed request's fn, so not necessary to use
blk_mq_complete_request_sync() any more.
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When aborting in-flight request for recovering controller, we have
to make sure that queue's complete function is called on completed
request before moving on. Otherwise, for example, the warning of
WARN_ON_ONCE(qp->mrs_used > 0) in ib_destroy_qp_user() may be
triggered on nvme-rdma.
Fix this issue by using blk_mq_tagset_wait_completed_request.
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Before aborting in-flight requests, all IO queues and their interrupts
have been shutdown. However, request's completion function may not be
done yet because it can be scheduled to run via IPI.
So don't abort one request if it is marked as completed, otherwise
we may abort one normal completed request.
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ensure the controller is not in the NEW state when nvme_probe() exits.
This will always allow a subsequent nvme_remove() to set the state to
DELETING, fixing a potential race between the initial asynchronous probe
and device removal.
Reported-by: Li Zhong <lizhongfs@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
With multipath enabled, nvme_scan_work() can read from the device
(through nvme_mpath_add_disk()) and hang [1]. However, with fabrics,
once ctrl->state is set to NVME_CTRL_DELETING, the reads will hang
(see nvmf_check_ready()) and the mpath stack device make_request
will block if head->list is not empty. However, when the head->list
consistst of only DELETING/DEAD controllers, we should actually not
block, but rather fail immediately.
In addition, before we go ahead and remove the namespaces, make sure
to clear the current path and kick the requeue list so that the
request will fast fail upon requeuing.
[1]:
--
INFO: task kworker/u4:3:166 blocked for more than 120 seconds.
Not tainted 5.2.0-rc6-vmlocalyes-00005-g808c8c2dc0cf #316
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kworker/u4:3 D 0 166 2 0x80004000
Workqueue: nvme-wq nvme_scan_work
Call Trace:
__schedule+0x851/0x1400
schedule+0x99/0x210
io_schedule+0x21/0x70
do_read_cache_page+0xa57/0x1330
read_cache_page+0x4a/0x70
read_dev_sector+0xbf/0x380
amiga_partition+0xc4/0x1230
check_partition+0x30f/0x630
rescan_partitions+0x19a/0x980
__blkdev_get+0x85a/0x12f0
blkdev_get+0x2a5/0x790
__device_add_disk+0xe25/0x1250
device_add_disk+0x13/0x20
nvme_mpath_set_live+0x172/0x2b0
nvme_update_ns_ana_state+0x130/0x180
nvme_set_ns_ana_state+0x9a/0xb0
nvme_parse_ana_log+0x1c3/0x4a0
nvme_mpath_add_disk+0x157/0x290
nvme_validate_ns+0x1017/0x1bd0
nvme_scan_work+0x44d/0x6a0
process_one_work+0x7d7/0x1240
worker_thread+0x8e/0xff0
kthread+0x2c3/0x3b0
ret_from_fork+0x35/0x40
INFO: task kworker/u4:1:1034 blocked for more than 120 seconds.
Not tainted 5.2.0-rc6-vmlocalyes-00005-g808c8c2dc0cf #316
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kworker/u4:1 D 0 1034 2 0x80004000
Workqueue: nvme-delete-wq nvme_delete_ctrl_work
Call Trace:
__schedule+0x851/0x1400
schedule+0x99/0x210
schedule_timeout+0x390/0x830
wait_for_completion+0x1a7/0x310
__flush_work+0x241/0x5d0
flush_work+0x10/0x20
nvme_remove_namespaces+0x85/0x3d0
nvme_do_delete_ctrl+0xb4/0x1e0
nvme_delete_ctrl_work+0x15/0x20
process_one_work+0x7d7/0x1240
worker_thread+0x8e/0xff0
kthread+0x2c3/0x3b0
ret_from_fork+0x35/0x40
--
Reported-by: Logan Gunthorpe <logang@deltatee.com>
Tested-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
When the user issues a command with side effects, we will end up freezing
the namespace request queue when updating disk info (and the same for
the corresponding mpath disk node).
However, we are not freezing the mpath node request queue,
which means that mpath I/O can still come in and block on blk_queue_enter
(called from nvme_ns_head_make_request -> direct_make_request).
This is a deadlock, because blk_queue_enter will block until the inner
namespace request queue is unfroze, but that process is blocked because
the namespace revalidation is trying to update the mpath disk info
and freeze its request queue (which will never complete because
of the I/O that is blocked on blk_queue_enter).
Fix this by freezing all the subsystem nsheads request queues before
executing the passthru command. Given that these commands are infrequent
we should not worry about this temporary I/O freeze to keep things sane.
Here is the matching hang traces:
--
[ 374.465002] INFO: task systemd-udevd:17994 blocked for more than 122 seconds.
[ 374.472975] Not tainted 5.2.0-rc3-mpdebug+ #42
[ 374.478522] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 374.487274] systemd-udevd D 0 17994 1 0x00000000
[ 374.493407] Call Trace:
[ 374.496145] __schedule+0x2ef/0x620
[ 374.500047] schedule+0x38/0xa0
[ 374.503569] blk_queue_enter+0x139/0x220
[ 374.507959] ? remove_wait_queue+0x60/0x60
[ 374.512540] direct_make_request+0x60/0x130
[ 374.517219] nvme_ns_head_make_request+0x11d/0x420 [nvme_core]
[ 374.523740] ? generic_make_request_checks+0x307/0x6f0
[ 374.529484] generic_make_request+0x10d/0x2e0
[ 374.534356] submit_bio+0x75/0x140
[ 374.538163] ? guard_bio_eod+0x32/0xe0
[ 374.542361] submit_bh_wbc+0x171/0x1b0
[ 374.546553] block_read_full_page+0x1ed/0x330
[ 374.551426] ? check_disk_change+0x70/0x70
[ 374.556008] ? scan_shadow_nodes+0x30/0x30
[ 374.560588] blkdev_readpage+0x18/0x20
[ 374.564783] do_read_cache_page+0x301/0x860
[ 374.569463] ? blkdev_writepages+0x10/0x10
[ 374.574037] ? prep_new_page+0x88/0x130
[ 374.578329] ? get_page_from_freelist+0xa2f/0x1280
[ 374.583688] ? __alloc_pages_nodemask+0x179/0x320
[ 374.588947] read_cache_page+0x12/0x20
[ 374.593142] read_dev_sector+0x2d/0xd0
[ 374.597337] read_lba+0x104/0x1f0
[ 374.601046] find_valid_gpt+0xfa/0x720
[ 374.605243] ? string_nocheck+0x58/0x70
[ 374.609534] ? find_valid_gpt+0x720/0x720
[ 374.614016] efi_partition+0x89/0x430
[ 374.618113] ? string+0x48/0x60
[ 374.621632] ? snprintf+0x49/0x70
[ 374.625339] ? find_valid_gpt+0x720/0x720
[ 374.629828] check_partition+0x116/0x210
[ 374.634214] rescan_partitions+0xb6/0x360
[ 374.638699] __blkdev_reread_part+0x64/0x70
[ 374.643377] blkdev_reread_part+0x23/0x40
[ 374.647860] blkdev_ioctl+0x48c/0x990
[ 374.651956] block_ioctl+0x41/0x50
[ 374.655766] do_vfs_ioctl+0xa7/0x600
[ 374.659766] ? locks_lock_inode_wait+0xb1/0x150
[ 374.664832] ksys_ioctl+0x67/0x90
[ 374.668539] __x64_sys_ioctl+0x1a/0x20
[ 374.672732] do_syscall_64+0x5a/0x1c0
[ 374.676828] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 374.738474] INFO: task nvmeadm:49141 blocked for more than 123 seconds.
[ 374.745871] Not tainted 5.2.0-rc3-mpdebug+ #42
[ 374.751419] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 374.760170] nvmeadm D 0 49141 36333 0x00004080
[ 374.766301] Call Trace:
[ 374.769038] __schedule+0x2ef/0x620
[ 374.772939] schedule+0x38/0xa0
[ 374.776452] blk_mq_freeze_queue_wait+0x59/0x100
[ 374.781614] ? remove_wait_queue+0x60/0x60
[ 374.786192] blk_mq_freeze_queue+0x1a/0x20
[ 374.790773] nvme_update_disk_info.isra.57+0x5f/0x350 [nvme_core]
[ 374.797582] ? nvme_identify_ns.isra.50+0x71/0xc0 [nvme_core]
[ 374.804006] __nvme_revalidate_disk+0xe5/0x110 [nvme_core]
[ 374.810139] nvme_revalidate_disk+0xa6/0x120 [nvme_core]
[ 374.816078] ? nvme_submit_user_cmd+0x11e/0x320 [nvme_core]
[ 374.822299] nvme_user_cmd+0x264/0x370 [nvme_core]
[ 374.827661] nvme_dev_ioctl+0x112/0x1d0 [nvme_core]
[ 374.833114] do_vfs_ioctl+0xa7/0x600
[ 374.837117] ? __audit_syscall_entry+0xdd/0x130
[ 374.842184] ksys_ioctl+0x67/0x90
[ 374.845891] __x64_sys_ioctl+0x1a/0x20
[ 374.850082] do_syscall_64+0x5a/0x1c0
[ 374.854178] entry_SYSCALL_64_after_hwframe+0x44/0xa9
--
Reported-by: James Puthukattukaran <james.puthukattukaran@oracle.com>
Tested-by: James Puthukattukaran <james.puthukattukaran@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
When CONFIG_NVME_MULTIPATH is set, only the hidden gendisk associated
with the per-controller ns is run through revalidate_disk when a
rescan is triggered, while the visible blockdev never gets its size
(bdev->bd_inode->i_size) updated to reflect any capacity changes that
may have occurred.
This prevents online resizing of nvme block devices and in extension of
any filesystems atop that will are unable to expand while mounted, as
userspace relies on the blockdev size for obtaining the disk capacity
(via BLKGETSIZE/64 ioctls).
Fix this by explicitly revalidating the actual namespace gendisk in
addition to the per-controller gendisk, when multipath is enabled.
Signed-off-by: Anthony Iliopoulos <ailiopoulos@suse.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This reverts commit 0298d54352.
With this patch, set 'poll_queues > hard queues' will lead to 'nr_read_queues = 0'
in nvme_calc_irq_sets. Then poll_queues setting can fail since dev->tagset.nr_maps
equals to 2 and nvme_pci_map_queues will not do map for poll queues.
Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When freeing the subsystem after finding another match with
__nvme_find_get_subsystem(), use put_device() instead of
__nvme_release_subsystem() which calls kfree() directly.
Per the documentation, put_device() should always be used
after device_initialization() is called. Otherwise, leaks
like the one below which was detected by kmemleak may occur.
Once the call of __nvme_release_subsystem() is removed it no
longer makes sense to keep the helper, so fold it back
into nvme_release_subsystem().
unreferenced object 0xffff8883d12bfbc0 (size 16):
comm "nvme", pid 2635, jiffies 4294933602 (age 739.952s)
hex dump (first 16 bytes):
6e 76 6d 65 2d 73 75 62 73 79 73 32 00 88 ff ff nvme-subsys2....
backtrace:
[<000000007d8fc208>] __kmalloc_track_caller+0x16d/0x2a0
[<0000000081169e5f>] kvasprintf+0xad/0x130
[<0000000025626f25>] kvasprintf_const+0x47/0x120
[<00000000fa66ad36>] kobject_set_name_vargs+0x44/0x120
[<000000004881f8b3>] dev_set_name+0x98/0xc0
[<000000007124dae3>] nvme_init_identify+0x1995/0x38e0
[<000000009315020a>] nvme_loop_configure_admin_queue+0x4fa/0x5e0
[<000000001a63e766>] nvme_loop_create_ctrl+0x489/0xf80
[<00000000a46ecc23>] nvmf_dev_write+0x1a12/0x2220
[<000000002259b3d5>] __vfs_write+0x66/0x120
[<000000002f6df81e>] vfs_write+0x154/0x490
[<000000007e8cfc19>] ksys_write+0x10a/0x240
[<00000000ff5c7b85>] __x64_sys_write+0x73/0xb0
[<00000000fee6d692>] do_syscall_64+0xaa/0x470
[<00000000997e1ede>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fixes: ab9e00cc72 ("nvme: track subsystems")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The ADATA SX6000LNP NVMe SSDs have the same subnqn and, due to this, a
system with more than one of these SSDs will only have one usable.
[ 0.942706] nvme nvme1: ignoring ctrl due to duplicate subnqn (nqn.2018-05.com.example:nvme:nvm-subsystem-OUI00E04C).
[ 0.943017] nvme nvme1: Removing after probe failure status: -22
02:00.0 Non-Volatile memory controller [0108]: Realtek Semiconductor Co., Ltd. Device [10ec:5762] (rev 01)
71:00.0 Non-Volatile memory controller [0108]: Realtek Semiconductor Co., Ltd. Device [10ec:5762] (rev 01)
There are no firmware updates available from the vendor, unfortunately.
Applying the NVME_QUIRK_IGNORE_DEV_SUBNQN quirk for these SSDs resolves
the issue, and they all work after this patch:
/dev/nvme0n1 2J1120050420 ADATA SX6000LNP [...]
/dev/nvme1n1 2J1120050540 ADATA SX6000LNP [...]
Signed-off-by: Misha Nasledov <misha@nasledov.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
-----BEGIN PGP SIGNATURE-----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=g8xI
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20190715' of git://git.kernel.dk/linux-block
Pull more block updates from Jens Axboe:
"A later pull request with some followup items. I had some vacation
coming up to the merge window, so certain things items were delayed a
bit. This pull request also contains fixes that came in within the
last few days of the merge window, which I didn't want to push right
before sending you a pull request.
This contains:
- NVMe pull request, mostly fixes, but also a few minor items on the
feature side that were timing constrained (Christoph et al)
- Report zones fixes (Damien)
- Removal of dead code (Damien)
- Turn on cgroup psi memstall (Josef)
- block cgroup MAINTAINERS entry (Konstantin)
- Flush init fix (Josef)
- blk-throttle low iops timing fix (Konstantin)
- nbd resize fixes (Mike)
- nbd 0 blocksize crash fix (Xiubo)
- block integrity error leak fix (Wenwen)
- blk-cgroup writeback and priority inheritance fixes (Tejun)"
* tag 'for-linus-20190715' of git://git.kernel.dk/linux-block: (42 commits)
MAINTAINERS: add entry for block io cgroup
null_blk: fixup ->report_zones() for !CONFIG_BLK_DEV_ZONED
block: Limit zone array allocation size
sd_zbc: Fix report zones buffer allocation
block: Kill gfp_t argument of blkdev_report_zones()
block: Allow mapping of vmalloc-ed buffers
block/bio-integrity: fix a memory leak bug
nvme: fix NULL deref for fabrics options
nbd: add netlink reconfigure resize support
nbd: fix crash when the blksize is zero
block: Disable write plugging for zoned block devices
block: Fix elevator name declaration
block: Remove unused definitions
nvme: fix regression upon hot device removal and insertion
blk-throttle: fix zero wait time for iops throttled group
block: Fix potential overflow in blk_report_zones()
blkcg: implement REQ_CGROUP_PUNT
blkcg, writeback: Implement wbc_blkcg_css()
blkcg, writeback: Add wbc->no_cgroup_owner
blkcg, writeback: Rename wbc_account_io() to wbc_account_cgroup_owner()
...
A smaller cycle this time. Notably we see another new driver, 'Soft
iWarp', and the deletion of an ancient unused driver for nes.
- Revise and simplify the signature offload RDMA MR APIs
- More progress on hoisting object allocation boiler plate code out of the
drivers
- Driver bug fixes and revisions for hns, hfi1, efa, cxgb4, qib, i40iw
- Tree wide cleanups: struct_size, put_user_page, xarray, rst doc conversion
- Removal of obsolete ib_ucm chardev and nes driver
- netlink based discovery of chardevs and autoloading of the modules
providing them
- Move more of the rdamvt/hfi1 uapi to include/uapi/rdma
- New driver 'siw' for software based iWarp running on top of netdev,
much like rxe's software RoCE.
- mlx5 feature to report events in their raw devx format to userspace
- Expose per-object counters through rdma tool
- Adaptive interrupt moderation for RDMA (DIM), sharing the DIM core
from netdev
-----BEGIN PGP SIGNATURE-----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=iWcG
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"A smaller cycle this time. Notably we see another new driver, 'Soft
iWarp', and the deletion of an ancient unused driver for nes.
- Revise and simplify the signature offload RDMA MR APIs
- More progress on hoisting object allocation boiler plate code out
of the drivers
- Driver bug fixes and revisions for hns, hfi1, efa, cxgb4, qib,
i40iw
- Tree wide cleanups: struct_size, put_user_page, xarray, rst doc
conversion
- Removal of obsolete ib_ucm chardev and nes driver
- netlink based discovery of chardevs and autoloading of the modules
providing them
- Move more of the rdamvt/hfi1 uapi to include/uapi/rdma
- New driver 'siw' for software based iWarp running on top of netdev,
much like rxe's software RoCE.
- mlx5 feature to report events in their raw devx format to userspace
- Expose per-object counters through rdma tool
- Adaptive interrupt moderation for RDMA (DIM), sharing the DIM core
from netdev"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (194 commits)
RMDA/siw: Require a 64 bit arch
RDMA/siw: Mark expected switch fall-throughs
RDMA/core: Fix -Wunused-const-variable warnings
rdma/siw: Remove set but not used variable 's'
rdma/siw: Add missing dependencies on LIBCRC32C and DMA_VIRT_OPS
RDMA/siw: Add missing rtnl_lock around access to ifa
rdma/siw: Use proper enumerated type in map_cqe_status
RDMA/siw: Remove unnecessary kthread create/destroy printouts
IB/rdmavt: Fix variable shadowing issue in rvt_create_cq
RDMA/core: Fix race when resolving IP address
RDMA/core: Make rdma_counter.h compile stand alone
IB/core: Work on the caller socket net namespace in nldev_newlink()
RDMA/rxe: Fill in wc byte_len with IB_WC_RECV_RDMA_WITH_IMM
RDMA/mlx5: Set RDMA DIM to be enabled by default
RDMA/nldev: Added configuration of RDMA dynamic interrupt moderation to netlink
RDMA/core: Provide RDMA DIM support for ULPs
linux/dim: Implement RDMA adaptive moderation (DIM)
IB/mlx5: Report correctly tag matching rendezvous capability
docs: infiniband: add it to the driver-api bookset
IB/mlx5: Implement VHCA tunnel mechanism in DEVX
...
This topic branch covers a fundamental change in how our sg lists are
allocated to make mq more efficient by reducing the size of the
preallocated sg list. This necessitates a large number of driver
changes because the previous guarantee that if a driver specified
SG_ALL as the size of its scatter list, it would get a non-chained
list and didn't need to bother with scatterlist iterators is now
broken and every driver *must* use scatterlist iterators.
This was broken out as a separate topic because we need to convert all
the drivers before pulling the trigger and unconverted drivers kept
being found, necessitating a rebase.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXSTzzCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishZB+AP9I8j/s
wWfg0Z3WNuf4D5I3rH4x1J3cQTqPJed+RjwgcQEA1gZvtOTg1ZEn/CYMVnaB92x0
t6MZSchIaFXeqfD+E7U=
=cv8o
-----END PGP SIGNATURE-----
Merge tag 'scsi-sg' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI scatter-gather list updates from James Bottomley:
"This topic branch covers a fundamental change in how our sg lists are
allocated to make mq more efficient by reducing the size of the
preallocated sg list.
This necessitates a large number of driver changes because the
previous guarantee that if a driver specified SG_ALL as the size of
its scatter list, it would get a non-chained list and didn't need to
bother with scatterlist iterators is now broken and every driver
*must* use scatterlist iterators.
This was broken out as a separate topic because we need to convert all
the drivers before pulling the trigger and unconverted drivers kept
being found, necessitating a rebase"
* tag 'scsi-sg' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (21 commits)
scsi: core: don't preallocate small SGL in case of NO_SG_CHAIN
scsi: lib/sg_pool.c: clear 'first_chunk' in case of no preallocation
scsi: core: avoid preallocating big SGL for data
scsi: core: avoid preallocating big SGL for protection information
scsi: lib/sg_pool.c: improve APIs for allocating sg pool
scsi: esp: use sg helper to iterate over scatterlist
scsi: NCR5380: use sg helper to iterate over scatterlist
scsi: wd33c93: use sg helper to iterate over scatterlist
scsi: ppa: use sg helper to iterate over scatterlist
scsi: pcmcia: nsp_cs: use sg helper to iterate over scatterlist
scsi: imm: use sg helper to iterate over scatterlist
scsi: aha152x: use sg helper to iterate over scatterlist
scsi: s390: zfcp_fc: use sg helper to iterate over scatterlist
scsi: staging: unisys: visorhba: use sg helper to iterate over scatterlist
scsi: usb: image: microtek: use sg helper to iterate over scatterlist
scsi: pmcraid: use sg helper to iterate over scatterlist
scsi: ipr: use sg helper to iterate over scatterlist
scsi: mvumi: use sg helper to iterate over scatterlist
scsi: lpfc: use sg helper to iterate over scatterlist
scsi: advansys: use sg helper to iterate over scatterlist
...
When we validate the new controller id, we want to skip
controllers that are either deleting or dead. Fix the check
to do that and not on the newly added controller.
Fixes: 1b1031ca63 ("nvme: validate cntlid during controller initialisation")
Reported-by: Jon Derrick <jonathan.derrick@intel.com>
Tested-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Current code allows the module to be unloaded even if there are
pending data structures, such as localports and controllers on
the localports, that have yet to hit their reference counting
to remove them.
Fix by having exit entrypoint explicitly delete every controller,
which in turn will remove references on the remoteports and localports
causing them to be deleted as well. The exit entrypoint, after
initiating the deletes, will wait for the last localport to be deleted
before continuing.
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
According to commit a10674bf24 ("tcp: detecting the misuse of
.sendpage for Slab objects") and previous discussion, tcp_sendpage
should not be used for pages that is managed by SLAB, as SLAB is not
taking page reference counters into consideration.
Signed-off-by: Mikhail Skorzhinskii <mskorzhinskiy@solarflare.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
There was a few false alarms sighted on target side about wrong data
digest while performing high throughput load to XFS filesystem shared
through NVMoF TCP.
This flag tells the rest of the kernel to ensure that the data buffer
does not change while the write is in flight. It incurs a performance
penalty, so only enable it when it is actually needed, i.e. when we are
calculating data digests.
Although even with this change in place, ext2 users can steel experience
false positives, as ext2 is not respecting this flag. This may be apply
to vfat as well.
Signed-off-by: Mikhail Skorzhinskii <mskorzhinskiy@solarflare.com>
Signed-off-by: Mike Playle <mplayle@solarflare.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
nvme_ns_remove() will first set the NVME_NS_REMOVING flag before removing
it from the list at the very last step.
So to avoid selecting a namespace in nvme_find_path() which is about to be
removed check the NVME_NS_REMOVING flag, too, when selecting a new path.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When we have a singular list in nvme_round_robin_path() we still
need to check its validity.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Factor our a common helper to check if a path has been disabled
by something other than the per-namespace ANA state.
Signed-off-by: Hannes Reinecke <hare@suse.com>
[hch: split from a bigger patch]
Signed-off-by: Christoph Hellwig <hch@lst.de>
>From the NVMe 1.4 spec:
NSFEAT bit 4 if set to 1: indicates that the fields NPWG, NPWA, NPDG, NPDA,
and NOWS are defined for this namespace and should be used by the host for
I/O optimization;
[ ... ]
Namespace Preferred Write Granularity (NPWG): This field indicates the
smallest recommended write granularity in logical blocks for this namespace.
This is a 0's based value. The size indicated should be less than or equal
to Maximum Data Transfer Size (MDTS) that is specified in units of minimum
memory page size. The value of this field may change if the namespace is
reformatted. The size should be a multiple of Namespace Preferred Write
Alignment (NPWA). Refer to section 8.25 for how this field is utilized to
improve performance and endurance.
[ ... ]
Each Write, Write Uncorrectable, or Write Zeroes commands should address a
multiple of Namespace Preferred Write Granularity (NPWG) (refer to Figure
245) and Stream Write Size (SWS) (refer to Figure 515) logical blocks (as
expressed in the NLB field), and the SLBA field of the command should be
aligned to Namespace Preferred Write Alignment (NPWA) (refer to Figure 245)
for best performance.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
There are two spelling mistakes in trace_seq_printf messages, fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When running a NVMe device that is attached to a addressing
challenged PCIe root port that requires bounce buffering, our
request sizes can easily overflow the swiotlb bounce buffer
size. Limit the maximum I/O size to the limit exposed by
the DMA mapping subsystem.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Atish Patra <Atish.Patra@wdc.com>
Tested-by: Atish Patra <Atish.Patra@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Modify nvme_alloc_sq_cmds() to call pci_free_p2pmem() to free the memory
it allocated using pci_alloc_p2pmem() in case pci_p2pmem_virt_to_bus()
returns null.
Makes sure not to call pci_free_p2pmem() if pci_alloc_p2pmem() returned
NULL, which can happen if CONFIG_PCI_P2PDMA is not configured.
The current implementation is not expected to leak since
pci_p2pmem_virt_to_bus() is expected to fail only if pci_alloc_p2pmem()
returns null. However, checking the return value of pci_alloc_p2pmem()
is more explicit.
Signed-off-by: Alan Mikhak <alan.mikhak@sifive.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Only request an IRQ mapping for read queues if at least one read queue
is being allocted, as nvme_pci_map_queues() will later on ignore the
unnecessary mapping request should nvme_dev_add() request such an IRQ
mapping even though no read queues are being allocated. However,
nvme_dev_add() can avoid making the request by checking the number of
read queues without assuming. This would bring it more in line with
nvme_setup_irqs() and nvme_calc_irq_sets().
Signed-off-by: Alan Mikhak <alan.mikhak@sifive.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Since Linux 5.0 drivers can safely set the largest DMA mask supported
by the device, and don't need fallbacks to work around the dma mapping
implementations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Fix sparse warning:
drivers/nvme/host/pci.c:2926:25: warning:
symbol 'nvme_dev_pm_ops' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl0Os1seHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGtx4H/j6i482XzcGFKTBm
A7mBoQpy+kLtoUov4EtBAR62OuwI8rsahW9di37QKndPoQrczWaKBmr3De6LCdPe
v3pl3O6wBbvH5ru+qBPFX9PdNbDvimEChh7LHxmMxNQq3M+AjZAZVJyfpoiFnx35
Fbge+LZaH/k8HMwZmkMr5t9Mpkip715qKg2o9Bua6dkH0AqlcpLlC8d9a+HIVw/z
aAsyGSU8jRwhoAOJsE9bJf0acQ/pZSqmFp0rDKqeFTSDMsbDRKLGq/dgv4nW0RiW
s7xqsjb/rdcvirRj3rv9+lcTVkOtEqwk0PVdL9WOf7g4iYrb3SOIZh8ZyViaDSeH
VTS5zps=
=huBY
-----END PGP SIGNATURE-----
Merge tag 'v5.2-rc6' into rdma.git for-next
For dependencies in next patches.
Resolve conflicts:
- Use uverbs_get_cleared_udata() with new cq allocation flow
- Continue to delete nes despite SPDX conflict
- Resolve list appends in mlx5_command_str()
- Use u16 for vport_rule stuff
- Resolve list appends in struct ib_client
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This is a preparation for adding new signature API to the rw-API.
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This enables to inject errors into the commands submitted to the admin
queue.
It is useful to test error handling in the controller initialization.
# echo 100 > /sys/kernel/debug/nvme0/fault_inject/probability
# echo 1 > /sys/kernel/debug/nvme0/fault_inject/times
# echo 10 > /sys/kernel/debug/nvme0/fault_inject/space
# nvme reset /dev/nvme0
# dmesg
...
nvme nvme0: Could not set queue count (16385)
nvme nvme0: IO queues not created
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Currenlty fault injection support for nvme only enables to inject errors
into the commands submitted to I/O queues.
In preparation for fault injection into the admin commands, this makes
the helper functions independent of struct nvme_ns.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The "result" field is in 64bit to be printed out which means it could be
like:
nvme_complete_rq: nvme0: qid=0, cmdid=0, res=18446612684158962624, etries=0, flags=0x0, status=0
Switch both the result and status field to be printed in hexadecimal
format to be easier to read.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This patch introduces fabrics commands tracing feature from host-side.
This patch does not include any changes for the previous host-side
tracing, but just add fabrics commands parsing in cmd=() format.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
[hch: fixed some whitespace damage]
Signed-off-by: Christoph Hellwig <hch@lst.de>
The following patches are going to provide the target-side trace which
might need these kind of macros. It would be great if it can be shared
between host and target side both.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
nvme_trace_disk_name() is now already being invoked with the function
prototype in trace.h. We don't need to export this symbol at all.
The following patches are going to provide target-side trace feature
with the exactly same function with this so that this patch removes the
EXPORT_SYMBOL() for this function.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Remove the status parameter o nvme_remove_dead_ctrl(), which is only
used for printing it.
We move the print message to the same function where actual error is
occurring.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
If the state change to NVME_CTRL_CONNECTING fails, the dmesg is going to
be like:
[ 293.689160] nvme nvme0: failed to mark controller CONNECTING
[ 293.689160] nvme nvme0: Removing after probe failure status: 0
Even it prints the first line to indicate the situation, the second line
is not proper because the status is 0 which means normally success of
the previous operation.
This patch makes it indicate the proper error value when it fails.
[ 25.932367] nvme nvme0: failed to mark controller CONNECTING
[ 25.932369] nvme nvme0: Removing after probe failure status: -16
This situation is able to be easily reproduced by:
root@target:~# rmmod nvme && modprobe nvme && rmmod nvme
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This patch removes the confusing assignment of the variable result at
the time of declaration and sets the value in error cases next to the
places where the actual error is happening.
Here we also set the result value to -ENODEV when we fail at the final
ctrl state transition in nvme_reset_work(). Without this assignment
result will hold 0 from nvme_setup_io_queue() and on failure 0 will be
passed to he nvme_remove_dead_ctrl() from final state transition.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
queue_count_set() seems like that it has been provided to limit the
number of queue entries for write/poll queues. But, the
queue_count_set() has been doing nothing but a parameter check even it
has num_possible_cpus() which is nop.
This patch removes entire queue_count_ops from the write_queues and
poll_queues.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
poll_queues will be zero even without zero initialization here.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The nvme pci driver prepares its devices for power loss during suspend
by shutting down the controllers. The power setting is deferred to
pci driver's power management before the platform removes power. The
suspend-to-idle mode, however, does not remove power.
NVMe devices that implement host managed power settings can achieve
lower power and better transition latencies than using generic PCI power
settings. Try to use this feature if the platform is not involved with
the suspend. If successful, restore the previous power state on resume.
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Mario Limonciello <mario.limonciello@dell.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
[hch: fixed the compilation for the !CONFIG_PM_SLEEP case]
Signed-off-by: Christoph Hellwig <hch@lst.de>
This patch introduces a nvme_is_fabrics() inline function to check
whether or not the given command structure is for fabrics.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Future use intends to make use of both, so export these functions. And
since their implementation is identical except for the opcode, provide a
new function that implement both.
[akinobu.mita@gmail.com>: fix line over 80 characters]
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When a shared namespace is removed, we call blk_cleanup_queue()
when the device can still be accessed as the current path and this can
result in submission to a dying queue. Hence, direct_make_request()
called by our mpath device may fail (propagating the failure to userspace).
Instead, we want to failover this I/O to a different path if one exists.
Thus, before we cleanup the request queue, we make sure that the device is
cleared from the current path nor it can be selected again as such.
Fix this by:
- clear the ns from the head->list and synchronize rcu to make sure there is
no concurrent path search that restores it as the current path
- clear the mpath current path in order to trigger a subsequent path search
and sync srcu to wait for any ongoing request submissions
- safely continue to namespace removal and blk_cleanup_queue
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When looking at console messages to troubleshoot, there are one
maybe two messages before creation of the controller is complete.
However, a lot of io takes place to reach that point. It's unclear
when things have started.
Add a message when the controller is attempting to create a new
association. Thus we know what controller, between what host and
remote port, and what NQN is being put into place for any
subsequent success or failure messages.
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Giridhar Malavali <gmalavali@marvell.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
sg_alloc_table_chained() currently allows the caller to provide one
preallocated SGL and returns if the requested number isn't bigger than
size of that SGL. This is used to inline an SGL for an IO request.
However, scattergather code only allows that size of the 1st preallocated
SGL to be SG_CHUNK_SIZE(128). This means a substantial amount of memory
(4KB) is claimed for the SGL for each IO request. If the I/O is small, it
would be prudent to allocate a smaller SGL.
Introduce an extra parameter to sg_alloc_table_chained() and
sg_free_table_chained() for specifying size of the preallocated SGL.
Both __sg_free_table() and __sg_alloc_table() assume that each SGL has the
same size except for the last one. Change the code to allow both functions
to accept a variable size for the 1st preallocated SGL.
[mkp: attempted to clarify commit desc]
Cc: Christoph Hellwig <hch@lst.de>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Ewan D. Milne <emilne@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: netdev@vger.kernel.org
Cc: linux-nvme@lists.infradead.org
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
lightnvm should have never used this function, as it is sending
passthrough requests, so switch it to blk_rq_append_bio like all the
other passthrough request users. Inline blk_init_request_from_bio into
the only remaining caller.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull NVMe fixes from Sagi.
* 'nvme-5.2-rc-next' of git://git.infradead.org/nvme:
nvme-rdma: use dynamic dma mapping per command
nvme: Fix u32 overflow in the number of namespace list calculation
nvmet: fix data_len to 0 for bdev-backed write_zeroes
nvme-tcp: fix queue mapping when queue count is limited
nvme-rdma: fix queue mapping when queue count is limited
Commit 87fd125344 ("nvme-rdma: remove redundant reference between
ib_device and tagset") caused a kernel panic when disconnecting from an
inaccessible controller (disconnect during re-connection).
--
nvme nvme0: Removing ctrl: NQN "testnqn1"
nvme_rdma: nvme_rdma_exit_request: hctx 0 queue_idx 1
BUG: unable to handle kernel paging request at 0000000080000228
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
...
Call Trace:
blk_mq_exit_hctx+0x5c/0xf0
blk_mq_exit_queue+0xd4/0x100
blk_cleanup_queue+0x9a/0xc0
nvme_rdma_destroy_io_queues+0x52/0x60 [nvme_rdma]
nvme_rdma_shutdown_ctrl+0x3e/0x80 [nvme_rdma]
nvme_do_delete_ctrl+0x53/0x80 [nvme_core]
nvme_sysfs_delete+0x45/0x60 [nvme_core]
kernfs_fop_write+0x105/0x180
vfs_write+0xad/0x1a0
ksys_write+0x5a/0xd0
do_syscall_64+0x55/0x110
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fa215417154
--
The reason for this crash is accessing an already freed ib_device for
performing dma_unmap during exit_request commands. The root cause for
that is that during re-connection all the queues are destroyed and
re-created (and the ib_device is reference counted by the queues and
freed as well) but the tagset stays alive and all the DMA mappings (that
we perform in init_request) kept in the request context. The original
commit fixed a different bug that was introduced during bonding (aka nic
teaming) tests that for some scenarios change the underlying ib_device
and caused memory leakage and possible segmentation fault. This commit
is a complementary commit that also changes the wrong DMA mappings that
were saved in the request context and making the request sqe dma
mappings dynamic with the command lifetime (i.e. mapped in .queue_rq and
unmapped in .complete). It also fixes the above crash of accessing freed
ib_device during destruction of the tagset.
Fixes: 87fd125344 ("nvme-rdma: remove redundant reference between ib_device and tagset")
Reported-by: Jim Harris <james.r.harris@intel.com>
Suggested-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
The Number of Namespaces (nn) field in the identify controller data structure is
defined as u32 and the maximum allowed value in NVMe specification is
0xFFFFFFFEUL. This change fixes the possible overflow of the DIV_ROUND_UP()
operation used in nvme_scan_ns_list() by casting the nn to u64.
Signed-off-by: Jaesoo Lee <jalee@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
NVMe uses PRPs (or optionally unlimited SGLs) for data transfers and
has no specific limit for a single DMA segement. Limiting the size
will cause problems because the block layer assumes PRP-ish devices
using a virt boundary mask don't have a segment limit. And while this
is true, we also really need to tell the DMA mapping layer about it,
otherwise dma-debug will trip over it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When the controller supports less queues than requested, we
should make sure that queue mapping does the right thing and
not assume that all queues are available. This fixes a crash
when the controller supports less queues than requested.
The rules are:
1. if no write queues are requested, we assign the available queues
to the default queue map. The default and read queue maps share the
existing queues.
2. if write queues are requested:
- first make sure that read queue map gets the requested
nr_io_queues count
- then grant the default queue map the minimum between the requested
nr_write_queues and the remaining queues. If there are no available
queues to dedicate to the default queue map, fallback to (1) and
share all the queues in the existing queue map.
Also, provide a log indication on how we constructed the different
queue maps.
Reported-by: Harris, James R <james.r.harris@intel.com>
Tested-by: Jim Harris <james.r.harris@intel.com>
Cc: <stable@vger.kernel.org> # v5.0+
Suggested-by: Roy Shterman <roys@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
When the controller supports less queues than requested, we
should make sure that queue mapping does the right thing and
not assume that all queues are available. This fixes a crash
when the controller supports less queues than requested.
The rules are:
1. if no write/poll queues are requested, we assign the available queues
to the default queue map. The default and read queue maps share the
existing queues.
2. if write queues are requested:
- first make sure that read queue map gets the requested
nr_io_queues count
- then grant the default queue map the minimum between the requested
nr_write_queues and the remaining queues. If there are no available
queues to dedicate to the default queue map, fallback to (1) and
share all the queues in the existing queue map.
3. if poll queues are requested:
- map the remaining queues to the poll queue map.
Also, provide a log indication on how we constructed the different
queue maps.
Reported-by: Harris, James R <james.r.harris@intel.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Tested-by: Jim Harris <james.r.harris@intel.com>
Cc: <stable@vger.kernel.org> # v5.0+
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
-----BEGIN PGP SIGNATURE-----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=lGyw
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20190524' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request from Keith, with fixes from a few folks.
- bio and sbitmap before atomic barrier fixes (Andrea)
- Hang fix for blk-mq freeze and unfreeze (Bob)
- Single segment count regression fix (Christoph)
- AoE now has a new maintainer
- tools/io_uring/ Makefile fix, and sync with liburing (me)
* tag 'for-linus-20190524' of git://git.kernel.dk/linux-block: (23 commits)
tools/io_uring: sync with liburing
tools/io_uring: fix Makefile for pthread library link
blk-mq: fix hang caused by freeze/unfreeze sequence
block: remove the bi_seg_{front,back}_size fields in struct bio
block: remove the segment size check in bio_will_gap
block: force an unlimited segment size on queues with a virt boundary
block: don't decrement nr_phys_segments for physically contigous segments
sbitmap: fix improper use of smp_mb__before_atomic()
bio: fix improper use of smp_mb__before_atomic()
aoe: list new maintainer for aoe driver
nvme-pci: use blk-mq mapping for unmanaged irqs
nvme: update MAINTAINERS
nvme: copy MTFA field from identify controller
nvme: fix memory leak for power latency tolerance
nvme: release namespace SRCU protection before performing controller ioctls
nvme: merge nvme_ns_ioctl into nvme_ioctl
nvme: remove the ifdef around nvme_nvm_ioctl
nvme: fix srcu locking on error return in nvme_get_ns_from_disk
nvme: Fix known effects
nvme-pci: Sync queues on reset
...
We use the controller's reported maximum firmware activation time as our
timeout before resetting a controller for a failed activation notice,
but this value was never being read so we could only use the default
timeout. Copy the Identify Controller MTFA field to the corresponding
nvme_ctrl's mtfa field.
Fixes: b6dccf7fae (“nvme: add support for FW activation without reset”).
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
Signed-off-by: Laine Walker-Avina <laine.walker-avina@intel.com>
[changelog, fix endian]
Signed-off-by: Keith Busch <keith.busch@intel.com>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unconditionally hide device pm latency tolerance when uninitializing
the controller to ensure all qos resources are released so that we're
not leaking this memory. This is safe to call if none were allocated in
the first place, or were previously freed.
Fixes: c5552fde102fc("nvme: Enable autonomous power state transitions")
Suggested-by: Keith Busch <keith.busch@intel.com>
Tested-by: David Milburn <dmilburn@redhat.com>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
[changelog]
Signed-off-by: Keith Busch <keith.busch@intel.com>
Holding the SRCU critical section protecting the namespace list can
cause deadlocks when using the per-namespace admin passthrough ioctl to
delete as namespace. Release it earlier when performing per-controller
ioctls to avoid that.
Reported-by: Kenneth Heitke <kenneth.heitke@intel.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Merge the two functions to make future changes a little easier.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
We already have a proper stub if lightnvm is not enabled, so don't bother
with the ifdef.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
If we can't get a namespace don't leak the SRCU lock. nvme_ioctl was
working around this, but nvme_pr_command wasn't handling this properly.
Just do what callers would usually expect.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
We're trying to append known effects to the ones reported in the
controller's log. The original patch accomplished this, but something
went wrong when patch was merged causing the effects log to override
the known effects.
Link: http://lists.infradead.org/pipermail/linux-nvme/2019-May/023710.html
Fixes: f4524cc456 ("nvme-pci: add known admin effects to augument admin effects log page")
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
A controller with multiple namespaces may have multiple request_queues with
their own timeout work. If a controller fails with IO outstanding to
diffent namespaces, each request queue may attempt to handle it, so
ensure there is no previously scheduled timeout work executing prior to
starting controller initialization by synchronizing with each queue.
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
The reset_work waits for queued IO to complete before setting the
controller to live. If any of these times out and requeues, we won't be
able to restart the controller because the reset_work is already running.
Flush all entered requests to a failed completion if a timeout occurs
in the connecting state, and ensure the controller can't transition to
the live state after we've unblocked it from waiting for completions.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
The reset state doesn't dispatch commands that it needs to wait for
anymore. If a timeout occurs in this state, the reset work is already
disabling the controller, so just reset the request's timer.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
If a controller disabling didn't start a freeze, don't wait for the
operation to complete.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
-----BEGIN PGP SIGNATURE-----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=ZKv1
-----END PGP SIGNATURE-----
Merge tag 'for-5.2/block-post-20190516' of git://git.kernel.dk/linux-block
Pull more block updates from Jens Axboe:
"This is mainly some late lightnvm changes that came in just before the
merge window, as well as fixes that have been queued up since the
initial pull request was frozen.
This contains:
- lightnvm changes, fixing race conditions, improving memory
utilization, and improving pblk compatability (Chansol, Igor,
Marcin)
- NVMe pull request with minor fixes all over the map (via Christoph)
- remove redundant error print in sata_rcar (Geert)
- struct_size() cleanup (Jackie)
- dasd CONFIG_LBADF warning fix (Ming)
- brd cond_resched() improvement (Mikulas)"
* tag 'for-5.2/block-post-20190516' of git://git.kernel.dk/linux-block: (41 commits)
block/bio-integrity: use struct_size() in kmalloc()
nvme: validate cntlid during controller initialisation
nvme: change locking for the per-subsystem controller list
nvme: trace all async notice events
nvme: fix typos in nvme status code values
nvme-fabrics: remove unused argument
nvme-multipath: avoid crash on invalid subsystem cntlid enumeration
nvme-fc: use separate work queue to avoid warning
nvme-rdma: remove redundant reference between ib_device and tagset
nvme-pci: mark expected switch fall-through
nvme-pci: add known admin effects to augument admin effects log page
nvme-pci: init shadow doorbell after each reset
brd: add cond_resched to brd_free_pages
sata_rcar: Remove ata_host_alloc() error printing
s390/dasd: fix build warning in dasd_eckd_build_cp_raw
lightnvm: pblk: use nvm_rq_to_ppa_list()
lightnvm: pblk: simplify partial read path
lightnvm: do not remove instance under global lock
lightnvm: track inflight target creations
lightnvm: pblk: recover only written metadata
...
The CNTLID value is required to be unique, and we do rely on this
for correct operation. So reject any controller for which a non-unique
CNTLID has been detected.
Based on a patch from Hannes Reinecke.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Life becomes a lot simpler if we just use the global
nvme_subsystems_lock to protect this list. Given that it is only
accessed during controller probing and removal that isn't a scalability
problem either.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
This patch removes the tracing of the NVMe Async events out of the
switch so that it can trace all the events including the ones which
are not handled in the nvme_handle_aen_notice(). The events which
are not handled in the nvme_handle_aen_notice() such as
NVME_AER_NOTICE_DISC_CHANGED corresponding event identifier needs
to be added in the drivers/nvme/host/trace.h so that it can stringify
the AER .
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The variable 'count' is not currently used by nvmf_create_ctrl(), so
remove it.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
A process holding an open reference to a removed disk prevents it
from completing deletion, so its name continues to exist. A subsequent
gendisk creation may have the same cntlid which risks collision when
using that for the name. Use the unique ctrl->instance instead.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When tearing down a controller the following warning is issued:
WARNING: CPU: 0 PID: 30681 at ../kernel/workqueue.c:2418 check_flush_dependency
This happens as the err_work workqueue item is scheduled on the
system workqueue (which has WQ_MEM_RECLAIM not set), but is flushed
from a workqueue which has WQ_MEM_RECLAIM set.
Fix this by providing an FC-NVMe specific workqueue.
Fixes: 4cff280a5f ("nvme-fc: resolve io failures during connect")
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
In the past, before adding f41725bb ("nvme-rdma: Use mr pool") commit,
we needed a reference on the ib_device as long as the tagset
was alive, as the MRs in the request structures needed a valid ib_device.
Now, we allocate/deallocate MR pool per QP and consume on demand.
Also remove nvme_rdma_free_tagset function and use blk_mq_free_tag_set
instead, as it unneeded anymore.
This commit also fixes a memory leakage and possible segmentation fault.
When configuring the system with NIC teaming (aka bonding), we use 1
network interface to create an HA connection to the target side. In case
one connection breaks down, nvme-rdma driver will get notification from
rdma-cm layer that underlying address was change and will start error
recovery process. During this process, we'll reconnect to the target
via the second interface in the bond without destroying the tagset.
This will cause a leakage of the initial rdma device (ndev) and miscount
in the reference count of the new created rdma device (new ndev). In
the final destruction (or in another error flow), we'll get a warning
dump from the ib_dealloc_pd that we still have inflight MR's related to
that pd. This happens becasue of the miscount of the reference tag of
the rdma device and causing access violation to it's elements (some
queues are not destroyed yet).
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
This patch fixes the following warning:
drivers/nvme/host/pci.c: In function ‘nvme_timeout’:
drivers/nvme/host/pci.c:1298:12: warning: this statement may fall through [-Wimplicit-fallthrough=]
shutdown = true;
~~~~~~~~~^~~~~~
drivers/nvme/host/pci.c:1299:2: note: here
case NVME_CTRL_CONNECTING:
^~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add known admin effects even if hardware has known admin effects page,
since hardware can't be ever trusted to report sane values.
(on my Intel DC P3700, it reports no side effects for namespace format)
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The spec states:
"The settings are not retained across a Controller Level Reset"
Therefore the driver must enable the shadow doorbell, after each reset.
This was caught while testing the nvme driver over upcoming nvme-mdev
device.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This is mostly update of the usual drivers: qla2xxx, qedf, smartpqi,
hpsa, lpfc, ufs, mpt3sas, ibmvfc and hisi_sas. Plus number of minor
changes, spelling fixes and other trivia.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXNIK0yYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbeFAP4wsOm6
BNqDvLbF7gHAH+oSVAeENd9tepXG2xKbUHmLRgEA1wPaUxon8L8v/SSsqwewqMXP
y6CnU6aO2iaViTNBsPs=
=RX74
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This is mostly update of the usual drivers: qla2xxx, qedf, smartpqi,
hpsa, lpfc, ufs, mpt3sas, ibmvfc and hisi_sas. Plus number of minor
changes, spelling fixes and other trivia"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (298 commits)
scsi: qla2xxx: Avoid that lockdep complains about unsafe locking in tcm_qla2xxx_close_session()
scsi: qla2xxx: Avoid that qlt_send_resp_ctio() corrupts memory
scsi: qla2xxx: Fix hardirq-unsafe locking
scsi: qla2xxx: Complain loudly about reference count underflow
scsi: qla2xxx: Use __le64 instead of uint32_t[2] for sending DMA addresses to firmware
scsi: qla2xxx: Introduce the dsd32 and dsd64 data structures
scsi: qla2xxx: Check the size of firmware data structures at compile time
scsi: qla2xxx: Pass little-endian values to the firmware
scsi: qla2xxx: Fix race conditions in the code for aborting SCSI commands
scsi: qla2xxx: Use an on-stack completion in qla24xx_control_vp()
scsi: qla2xxx: Make qla24xx_async_abort_cmd() static
scsi: qla2xxx: Remove unnecessary locking from the target code
scsi: qla2xxx: Remove qla_tgt_cmd.released
scsi: qla2xxx: Complain if a command is released that is owned by the firmware
scsi: qla2xxx: target: Fix offline port handling and host reset handling
scsi: qla2xxx: Fix abort handling in tcm_qla2xxx_write_pending()
scsi: qla2xxx: Fix error handling in qlt_alloc_qfull_cmd()
scsi: qla2xxx: Simplify qlt_send_term_imm_notif()
scsi: qla2xxx: Fix use-after-free issues in qla2xxx_qpair_sp_free_dma()
scsi: qla2xxx: Fix a qla24xx_enable_msix() error path
...
-----BEGIN PGP SIGNATURE-----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=Ot0g
-----END PGP SIGNATURE-----
Merge tag 'for-5.2/block-20190507' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
"Nothing major in this series, just fixes and improvements all over the
map. This contains:
- Series of fixes for sed-opal (David, Jonas)
- Fixes and performance tweaks for BFQ (via Paolo)
- Set of fixes for bcache (via Coly)
- Set of fixes for md (via Song)
- Enabling multi-page for passthrough requests (Ming)
- Queue release fix series (Ming)
- Device notification improvements (Martin)
- Propagate underlying device rotational status in loop (Holger)
- Removal of mtip32xx trim support, which has been disabled for years
(Christoph)
- Improvement and cleanup of nvme command handling (Christoph)
- Add block SPDX tags (Christoph)
- Cleanup/hardening of bio/bvec iteration (Christoph)
- A few NVMe pull requests (Christoph)
- Removal of CONFIG_LBDAF (Christoph)
- Various little fixes here and there"
* tag 'for-5.2/block-20190507' of git://git.kernel.dk/linux-block: (164 commits)
block: fix mismerge in bvec_advance
block: don't drain in-progress dispatch in blk_cleanup_queue()
blk-mq: move cancel of hctx->run_work into blk_mq_hw_sysfs_release
blk-mq: always free hctx after request queue is freed
blk-mq: split blk_mq_alloc_and_init_hctx into two parts
blk-mq: free hw queue's resource in hctx's release handler
blk-mq: move cancel of requeue_work into blk_mq_release
blk-mq: grab .q_usage_counter when queuing request from plug code path
block: fix function name in comment
nvmet: protect discovery change log event list iteration
nvme: mark nvme_core_init and nvme_core_exit static
nvme: move command size checks to the core
nvme-fabrics: check more command sizes
nvme-pci: check more command sizes
nvme-pci: remove an unneeded variable initialization
nvme-pci: unquiesce admin queue on shutdown
nvme-pci: shutdown on timeout during deletion
nvme-pci: fix psdt field for single segment sgls
nvme-multipath: don't print ANA group state by default
nvme-multipath: split bios with the ns_head bio_set before submitting
...
Current lightnvm and pblk implementation does not care about NVMe max
data transfer size, which can be smaller than 64*K=256K. There are
existing NVMe controllers which NVMe max data transfer size is lower
that 256K (for example 128K, which happens for existing NVMe
controllers which are NVMe spec compliant). Such a controllers are not
able to handle command which contains 64 PPAs, since the the size of
DMAed buffer will be above the capabilities of such a controller.
Signed-off-by: Igor Konopko <igor.j.konopko@intel.com>
Reviewed-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Most command aren't PCIe specific, so move the size checking for them
to core.c
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
struct common_command provides a common structure for NVMe-oF command
format. It also needs to be checked for unintended size growth.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
All the NVMe command has 64bytes fixed size so that it has been assured
with BUILD_BUG_ON(). The remaining command structures in linux/nvme.h
also need to be checked here.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Variable "n" will be assigned once kstrtoint() succeeds, otherwise it
will not be referred because kstrtoint() will return an error which
means go out from this function.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Just like IO queues, the admin queue also will not be restarted after a
controller shutdown. Unquiesce this queue so that we do not block
request dispatch on a permanently disabled controller.
Reported-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We do not restart a controller in a deleting state for timeout errors.
When in this state, unblock potential request dispatchers with failed
completions by shutting down the controller on timeout detection.
Reported-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The shortcut for single segment SGL requests did not set the PSDT field
to mark the request as using SGLs.
Fixes: 297910571f ("nvme-pci: optimize mapping single segment requests using SGLs")
Signed-off-by: Klaus Birkelund Jensen <klaus.jensen@cnexlabs.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
If the bio is moved to a different queue via blk_steal_bios() and
the original queue is destroyed in nvme_remove_ns() we'll be ending
with a crash in bio_endio() as the mempool for the split bio bvecs
had already been destroyed.
So split the bio using the original queue (which will remain during the
lifetime of the bio) before sending it down to the underlying device.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
If I/O queue connect times out, we might have freed the queue socket
already, so check for that on the error path in nvme_tcp_start_queue.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
If our target exposed a namespace with a block size that is greater
than PAGE_SIZE, set 0 capacity on the namespace as we do not support it.
This issue encountered when the nvmet namespace was backed by a tempfile.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
usually nvme_ prefix is for core functions.
While we're cleaning up, remove redundant empty lines
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
If we timeout the admin startup sequence we might not yet have
an I/O tagset allocated which causes the teardown sequence to crash.
Make nvme_tcp_teardown_io_queues safe by not iterating inflight tags
if the tagset wasn't allocated.
Fixes: 4c174e6366 ("nvme-rdma: fix timeout handler")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
If we timeout the admin startup sequence we might not yet have
an I/O tagset allocated which causes the teardown sequence to crash.
Make nvme_tcp_teardown_io_queues safe by not iterating inflight tags
if the tagset wasn't allocated.
Fixes: 39d5775746 ("nvme-tcp: fix timeout handler")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAly8rGYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGmZMH/1IRB0E1Qmzz8yzw
wj79UuRGYPqxDDSWW+wNc8sU4Ic7iYirn9APHAztCdQqsjmzU/OVLfSa3JhdBe5w
THo7pbGKBqEDcWnKfNk/21jXFNLZ1vr9BoQv2DGU2MMhHAyo/NZbalo2YVtpQPmM
OCRth5n+LzvH7rGrX7RYgWu24G9l3NMfgtaDAXBNXesCGFAjVRrdkU5CBAaabvtU
4GWh/nnutndOOLdByL3x+VZ3H3fIBnbNjcIGCglvvqzk7h3hrfGEl4UCULldTxcM
IFsfMUhSw1ENy7F6DHGbKIG90cdCJcrQ8J/ziEzjj/KLGALluutfFhVvr6YCM2J6
2RgU8CY=
=CfY1
-----END PGP SIGNATURE-----
Merge tag 'v5.1-rc6' into for-5.2/block
Pull in v5.1-rc6 to resolve two conflicts. One is in BFQ, in just a
comment, and is trivial. The other one is a conflict due to a later fix
in the bio multi-page work, and needs a bit more care.
* tag 'v5.1-rc6': (770 commits)
Linux 5.1-rc6
block: make sure that bvec length can't be overflow
block: kill all_q_node in request_queue
x86/cpu/intel: Lower the "ENERGY_PERF_BIAS: Set to normal" message's log priority
coredump: fix race condition between mmget_not_zero()/get_task_mm() and core dumping
mm/kmemleak.c: fix unused-function warning
init: initialize jump labels before command line option parsing
kernel/watchdog_hld.c: hard lockup message should end with a newline
kcov: improve CONFIG_ARCH_HAS_KCOV help text
mm: fix inactive list balancing between NUMA nodes and cgroups
mm/hotplug: treat CMA pages as unmovable
proc: fixup proc-pid-vm test
proc: fix map_files test on F29
mm/vmstat.c: fix /proc/vmstat format for CONFIG_DEBUG_TLBFLUSH=y CONFIG_SMP=n
mm/memory_hotplug: do not unlock after failing to take the device_hotplug_lock
mm: swapoff: shmem_unuse() stop eviction without igrab()
mm: swapoff: take notice of completion sooner
mm: swapoff: remove too limiting SWAP_UNUSE_MAX_TRIES
mm: swapoff: shmem_find_swap_entries() filter out other types
slab: store tagged freelist for off-slab slabmgmt
...
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull RCU and LKMM commits from Paul E. McKenney:
- An LKMM commit adding support for synchronize_srcu_expedited()
- A couple of straggling RCU flavor consolidation updates
- Documentation updates.
- Miscellaneous fixes
- SRCU updates
- RCU CPU stall-warning updates
- Torture-test updates
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently the FC-NVMe driver is leverating the SCSI FC transport class to
access the remote ports. Which means that all FC-NVMe remote ports will be
visible to the fc transport layer, but due to missing definitions the port
roles will always be 'unknown'. This patch adds the missing definitions to
the fc transport class to that the port roles are correctly displayed.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Giridhar Malavali <gmalavali@marvell.com>
Reviewed-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch fixes a long-standing bug that initialized the FC-NVME
cmnd iu CSN value to 1. Early FC-NVME specs had the connection starting
with CSN=1. By the time the spec reached approval, the language had
changed to state a connection should start with CSN=0. This patch
corrects the initialization value for FC-NVME connections.
Additionally, in reviewing the transport, the CSN value is assigned to
the new IU early in the start routine. It's possible that a later dma
map request may fail, causing the command to never be sent to the
controller. Change the location of the assignment so that it is
immediately prior to calling the lldd. Add a comment block to explain
the impacts if the lldd were to additionally fail sending the command.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
nvme_cancel_request() is used in error handler, and it is always
reliable to cancel request synchronously, and avoids possible race
in which request may be completed after real hw queue is destroyed.
One issue is reported by our customer on NVMe RDMA, in which freed ib
queue pair may be used in nvme_rdma_complete_rq().
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: James Smart <james.smart@broadcom.com>
Cc: linux-nvme@lists.infradead.org
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Identify Namespace failures are logged as a warning but there is not
an indication of the cause for the failure. Update the log message to
include the error status.
Signed-off-by: Kenneth Heitke <kenneth.heitke@intel.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Remove two pointless local variables, remove ret assignment that is
never used, move the use_sgl initialization closer to where it is used.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
If the controller supports SGLs we can take another short cut for single
segment request, given that we can always map those without another
indirection structure, and thus don't need to create a scatterlist
structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
If a request is single segment and fits into one or two PRP entries we
do not have to create a scatterlist for it, but can just map the bio_vec
directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
We'll have a better way to optimize for small I/O that doesn't
require it soon, so remove the existing inline_sg case to make that
optimization easier to implement.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
This prepares for some bigger changes to the data mapping helpers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
We always have exactly one segment, so we can simply call dma_map_bvec.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
This mirrors how nvme_map_pci is called and will allow simplifying some
checks in nvme_unmap_pci later on.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
This means we now have a function that undoes everything nvme_map_data
does and we can simplify the error handling a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cleaning up the command setup isn't related to unmapping data, and
disentangling them will simplify error handling a bit down the road.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
nvme_init_iod should really be split into two parts: initialize a few
general iod fields, which can easily be done at the beginning of
nvme_queue_rq, and allocating the scatterlist if needed, which logically
belongs into nvme_map_data with the code making use of it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
We don't need to save the dma device as it's not used in the hot path
and hasn't in a long time. Shrink the struct nvme_queue removing this
unnecessary member.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
A negative value for the cq_vector used to mean the queue is either
disabled or a polled queue. However, we have a queue enabled flag,
so the cq_vector had been serving double duty.
Don't overload the meaning of cq_vector. Use a flag specific to the
polled queues instead.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Use le16_to_cpu instead of le16_to_cpup and le64_to_cpu instead of
le64_to_cpup. This will also align the code to nvme-core driver
convention.
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When undergoing state transitions I/O might be requeued, hence
we should always call nvme_mpath_set_live() to schedule requeue_work
whenever the nvme device is live, independent on whether the
old state was live or not.
Signed-off-by: Martin George <marting@netapp.com>
Signed-off-by: Gargi Srinivas <sring@netapp.com>
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
nvme_tcp_end_request just takes the status value and the converts
it to little endian as well as shifting for the phase bit.
Fixes: 43ce38a6d823 ("nvme-tcp: support C2HData with SUCCESS flag")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
The cleanup_srcu_struct_quiesced() function was added because NVME
used WQ_MEM_RECLAIM workqueues and SRCU did not, which meant that
NVME workqueues waiting on SRCU workqueues could result in deadlocks
during low-memory conditions. However, SRCU now also has WQ_MEM_RECLAIM
workqueues, so there is no longer a potential for deadlock. Furthermore,
it turns out to be extremely hard to use cleanup_srcu_struct_quiesced()
correctly due to the fact that SRCU callback invocation accesses the
srcu_struct structure's per-CPU data area just after callbacks are
invoked. Therefore, the usual practice of using srcu_barrier() to wait
for callbacks to be invoked before invoking cleanup_srcu_struct_quiesced()
fails because SRCU's callback-invocation workqueue handler might be
delayed, which can result in cleanup_srcu_struct_quiesced() being invoked
(and thus freeing the per-CPU data) before the SRCU's callback-invocation
workqueue handler is finished using that per-CPU data. Nor is this a
theoretical problem: KASAN emitted use-after-free warnings because of
this problem on actual runs.
In short, NVME can now safely invoke cleanup_srcu_struct(), which
avoids the use-after-free scenario. And cleanup_srcu_struct_quiesced()
is quite difficult to use safely. This commit therefore removes
cleanup_srcu_struct_quiesced(), switching its sole user back to
cleanup_srcu_struct(). This effectively reverts the following pair
of commits:
f7194ac32c ("srcu: Add cleanup_srcu_struct_quiesced()")
4317228ad9 ("nvme: Avoid flush dependency in delete controller flow")
Reported-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Bart Van Assche <bvanassche@acm.org>
-----BEGIN PGP SIGNATURE-----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=qBae
-----END PGP SIGNATURE-----
Merge tag 'for-5.1/block-post-20190315' of git://git.kernel.dk/linux-block
Pull more block layer changes from Jens Axboe:
"This is a collection of both stragglers, and fixes that came in after
I finalized the initial pull. This contains:
- An MD pull request from Song, with a few minor fixes
- Set of NVMe patches via Christoph
- Pull request from Konrad, with a few fixes for xen/blkback
- pblk fix IO calculation fix (Javier)
- Segment calculation fix for pass-through (Ming)
- Fallthrough annotation for blkcg (Mathieu)"
* tag 'for-5.1/block-post-20190315' of git://git.kernel.dk/linux-block: (25 commits)
blkcg: annotate implicit fall through
nvme-tcp: support C2HData with SUCCESS flag
nvmet: ignore EOPNOTSUPP for discard
nvme: add proper write zeroes setup for the multipath device
nvme: add proper discard setup for the multipath device
nvme: remove nvme_ns_config_oncs
nvme: disable Write Zeroes for qemu controllers
nvmet-fc: bring Disconnect into compliance with FC-NVME spec
nvmet-fc: fix issues with targetport assoc_list list walking
nvme-fc: reject reconnect if io queue count is reduced to zero
nvme-fc: fix numa_node when dev is null
nvme-fc: use nr_phys_segments to determine existence of sgl
nvme-loop: init nvmet_ctrl fatal_err_work when allocate
nvme: update comment to make the code easier to read
nvme: put ns_head ref if namespace fails allocation
nvme-trace: fix cdw10 buffer overrun
nvme: don't warn on block content change effects
nvme: add get-feature to admin cmds tracer
md: Fix failed allocation of md_register_thread
It's wrong to add len to sector_nr in raid10 reshape twice
...
A C2HData PDU with the SUCCESS flag set indicates that the I/O was
completed by the controller successfully and means that a subsequent
completion response capsule PDU will be ommitted.
If we see this flag, fisrt we check that LAST_PDU flag is set as well,
and then we complete the request when the data transfer (and data digest
verification if its on) is done.
While we're at it, reuse a bit of code with nvme_fail_request.
Reported-by: Steve Blightman <steve.blightman@oracle.com>
Suggested-by: Oliver Smith-Denny <osmithde@cisco.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Oliver Smith-Denny <osmithde@cisco.com>
Tested-by: Oliver Smith-Denny <osmithde@cisco.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a gendisk argument to nvme_config_write_zeroes so that the call to
nvme_update_disk_info for the multipath device node updates the
proper request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Tested-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a gendisk argument to nvme_config_discard so that the call to
nvme_update_disk_info for the multipath device node updates the
proper request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Tested-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just opencode the two function calls in the caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Tested-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Qemu started out with a broken implementation of Write Zeroes written
by yours truly. Disable Write Zeroes on qemu for now, eventually
we need to go back and make all the qemu quirks version specific,
but that is left for another time.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If:
- A successful connect has occurred with an io queue count greater than
zero and namespaces detected and running.
- An error or something occurs which causes a termination of the prior
association and then starts a reconnect,
- The reconnect then creates a new controller, but for whatever reason,
nvme_set_queue_count() results in io queue count set to zero. This
will skip io queue and tag set changes.
- But... the controller will transition to live, calling
nvme_start_ctrl, which calls nvme_start_queues(), which then releases
I/Os into the transport which then sends them to the driver.
As there are no queues, things eventually hit the driver looking for a
handle, which was cleared when the original controller was reset, and it
can't proceed. Worst case, things progress, but everything fails.
In the failing scenario, the nvme_set_features(NVME_FEAT_NUM_QUEUES)
command actually failed with a NVME_SC_INTERNAL error. For some reason,
although nvme_set_queue_count() saw the error and set io queue count to
zero, it doesn't return a failure status to the transport, which allows
the transport to continue using the controller.
Fix the problem by simply rejecting the new association if at least 1
I/O queue can't be created. The association reject will fail the
reconnect attempt and fall into the reconnect retry policy.
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A recent change added a numa_node field to the nvme controller
and has the transport assign the node using dev_to_node().
However, fcloop registers with a NULL device struct, so the
dev_to_node() call oops.
Revise the assignment to assign no node when device struct is null.
Fixes: 103e515efa ("nvme: add a numa_node field to struct nvme_ctrl")
Reported-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
[hch: small coding style fixup]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For some nvme command, when issued by the nvme core layer, there
is an internal buffer which can cause blk_rq_payload_bytes() to
return a non-zero value yet there is no actual/real command payload
and sg list. An example is the WRITE ZEROES command.
To address this, when making choices on whether to dma map an sgl,
use blk_rq_nr_phys_segments() instead of blk_rq_payload_bytes().
When there is a sgl, blk_rq_payload_bytes() will return the amount
of data to be transferred by the sgl.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After commit a686ed75c0 ("nvme: introduce a helper function for
controller deletion), nvme_delete_ctrl_sync no longer use flush_work.
Update comment, accordingly.
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In case nvme_alloc_ns fails after we initialize ns_head but before we
add the ns to the controller namespaces list we need to explicitly put
the ns_head reference because when we teardown the controller we
won't find it, causing us to leak a dangling subsystem eventually.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The field is defined to be a 24 byte array, we don't need to multiply
the sizeof() that field by the number of dwords it covers.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A write or flush IO passthrough command is expected to change the
logical block content, so don't warn on these as no additional handling
is necessary.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=VBaU
-----END PGP SIGNATURE-----
Merge tag 'for-5.1/block-20190302' of git://git.kernel.dk/linux-block
Pull block layer updates from Jens Axboe:
"Not a huge amount of changes in this round, the biggest one is that we
finally have Mings multi-page bvec support merged. Apart from that,
this pull request contains:
- Small series that avoids quiescing the queue for sysfs changes that
match what we currently have (Aleksei)
- Series of bcache fixes (via Coly)
- Series of lightnvm fixes (via Mathias)
- NVMe pull request from Christoph. Nothing major, just SPDX/license
cleanups, RR mp policy (Hannes), and little fixes (Bart,
Chaitanya).
- BFQ series (Paolo)
- Save blk-mq cpu -> hw queue mapping, removing a pointer indirection
for the fast path (Jianchao)
- fops->iopoll() added for async IO polling, this is a feature that
the upcoming io_uring interface will use (Christoph, me)
- Partition scan loop fixes (Dongli)
- mtip32xx conversion from managed resource API (Christoph)
- cdrom registration race fix (Guenter)
- MD pull from Song, two minor fixes.
- Various documentation fixes (Marcos)
- Multi-page bvec feature. This brings a lot of nice improvements
with it, like more efficient splitting, larger IOs can be supported
without growing the bvec table size, and so on. (Ming)
- Various little fixes to core and drivers"
* tag 'for-5.1/block-20190302' of git://git.kernel.dk/linux-block: (117 commits)
block: fix updating bio's front segment size
block: Replace function name in string with __func__
nbd: propagate genlmsg_reply return code
floppy: remove set but not used variable 'q'
null_blk: fix checking for REQ_FUA
block: fix NULL pointer dereference in register_disk
fs: fix guard_bio_eod to check for real EOD errors
blk-mq: use HCTX_TYPE_DEFAULT but not 0 to index blk_mq_tag_set->map
block: optimize bvec iteration in bvec_iter_advance
block: introduce mp_bvec_for_each_page() for iterating over page
block: optimize blk_bio_segment_split for single-page bvec
block: optimize __blk_segment_map_sg() for single-page bvec
block: introduce bvec_nth_page()
iomap: wire up the iopoll method
block: add bio_set_polled() helper
block: wire up block device iopoll method
fs: add an iopoll method to struct file_operations
loop: set GENHD_FL_NO_PART_SCAN after blkdev_reread_part()
loop: do not print warn message if partition scan is successful
block: bounce: make sure that bvec table is updated
...
Pull irq updates from Thomas Gleixner:
"The interrupt departement delivers this time:
- New infrastructure to manage NMIs on platforms which have a sane
NMI delivery, i.e. identifiable NMI vectors instead of a single
lump.
- Simplification of the interrupt affinity management so drivers
don't have to implement ugly loops around the PCI/MSI enablement.
- Speedup for interrupt statistics in /proc/stat
- Provide a function to retrieve the default irq domain
- A new interrupt controller for the Loongson LS1X platform
- Affinity support for the SiFive PLIC
- Better support for the iMX irqsteer driver
- NUMA aware memory allocations for GICv3
- The usual small fixes, improvements and cleanups all over the
place"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
irqchip/imx-irqsteer: Add multi output interrupts support
irqchip/imx-irqsteer: Change to use reg_num instead of irq_group
dt-bindings: irq: imx-irqsteer: Add multi output interrupts support
dt-binding: irq: imx-irqsteer: Use irq number instead of group number
irqchip/brcmstb-l2: Use _irqsave locking variants in non-interrupt code
irqchip/gicv3-its: Use NUMA aware memory allocation for ITS tables
irqdomain: Allow the default irq domain to be retrieved
irqchip/sifive-plic: Implement irq_set_affinity() for SMP host
irqchip/sifive-plic: Differentiate between PLIC handler and context
irqchip/sifive-plic: Add warning in plic_init() if handler already present
irqchip/sifive-plic: Pre-compute context hart base and enable base
PCI/MSI: Remove obsolete sanity checks for multiple interrupt sets
genirq/affinity: Remove the leftovers of the original set support
nvme-pci: Simplify interrupt allocation
genirq/affinity: Add new callback for (re)calculating interrupt sets
genirq/affinity: Store interrupt sets size in struct irq_affinity
genirq/affinity: Code consolidation
irqchip/irq-sifive-plic: Check and continue in case of an invalid cpuid.
irqchip/i8259: Fix shutdown order by moving syscore_ops registration
dt-bindings: interrupt-controller: loongson ls1x intc
...
Use blk_rq_nr_phys_segments() instead of blk_rq_payload_bytes() to check
if a command contains data to be mapped. This fixes the case where
a struct request contains LBAs, but it has no payload, such as
Write Zeroes support.
Fixes: 6e02318eae ("nvme: add support for the Write Zeroes command")
Reported-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Tested-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Update license to use SPDX-License-Identifier instead of verbose license
text.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Update license to use SPDX-License-Identifier instead of verbose license
text.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Update license to use SPDX-License-Identifier instead of verbose license
text.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Update license to use SPDX-License-Identifier instead of verbose license
text.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Update license to use SPDX-License-Identifier instead of verbose license
text.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Update license to use SPDX-License-Identifier instead of verbose license
text.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
nvme_alloc_ns() might fail, so we should be returning an error code.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This patch does not change any functionality but makes the next patch
in this series easier to read.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Since nvme_delete_ctrl_sync() is not called from any other kernel module,
unexport it.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This patch avoids that the compiler complains about 'ret' being set
but not being used when building with W=1.
Fixes: 3b6592f70a ("nvme: utilize two queue maps, one for reads and one for writes") # v5.0-rc1
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This patch avoids that the kernel-doc tool reports a warning when
building with W=1.
Fixes: 26c682274e ("nvme-fabrics: allow nvmf_connect_io_queue to poll") # v5.0-rc1
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Implement a simple round-robin I/O policy for multipathing. Path
selection is done in two rounds, first iterating across all optimized
paths, and if that doesn't return any valid paths, iterate over all
optimized and non-optimized paths. If no paths are found, use the
existing algorithm. Also add a sysfs attribute 'iopolicy' to switch
between the current NUMA-aware I/O policy and the 'round-robin' I/O
policy.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The NVME PCI driver contains a tedious mechanism for interrupt
allocation, which is necessary to adjust the number and size of interrupt
sets to the maximum available number of interrupts which depends on the
underlying PCI capabilities and the available CPU resources.
It works around the former short comings of the PCI and core interrupt
allocation mechanims in combination with interrupt sets.
The PCI interrupt allocation function allows to provide a maximum and a
minimum number of interrupts to be allocated and tries to allocate as
many as possible. This worked without driver interaction as long as there
was only a single set of interrupts to handle.
With the addition of support for multiple interrupt sets in the generic
affinity spreading logic, which is invoked from the PCI interrupt
allocation, the adaptive loop in the PCI interrupt allocation did not
work for multiple interrupt sets. The reason is that depending on the
total number of interrupts which the PCI allocation adaptive loop tries
to allocate in each step, the number and the size of the interrupt sets
need to be adapted as well. Due to the way the interrupt sets support was
implemented there was no way for the PCI interrupt allocation code or the
core affinity spreading mechanism to invoke a driver specific function
for adapting the interrupt sets configuration.
As a consequence the driver had to implement another adaptive loop around
the PCI interrupt allocation function and calling that with maximum and
minimum interrupts set to the same value. This ensured that the
allocation either succeeded or immediately failed without any attempt to
adjust the number of interrupts in the PCI code.
The core code now allows drivers to provide a callback to recalculate the
number and the size of interrupt sets during PCI interrupt allocation,
which in turn allows the PCI interrupt allocation function to be called
in the same way as with a single set of interrupts. The PCI code handles
the adaptive loop and the interrupt affinity spreading mechanism invokes
the driver callback to adapt the interrupt set configuration to the
current loop value. This replaces the adaptive loop in the driver
completely.
Implement the NVME specific callback which adjusts the interrupt sets
configuration and remove the adaptive allocation loop.
[ tglx: Simplify the callback further and restore the dropped adjustment of
number of sets ]
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: linux-nvme@lists.infradead.org
Cc: linux-pci@vger.kernel.org
Cc: Keith Busch <keith.busch@intel.com>
Cc: Sumit Saxena <sumit.saxena@broadcom.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Shivasharan Srikanteshwara <shivasharan.srikanteshwara@broadcom.com>
Link: https://lkml.kernel.org/r/20190216172228.602546658@linutronix.de
The interrupt affinity spreading mechanism supports to spread out
affinities for one or more interrupt sets. A interrupt set contains one
or more interrupts. Each set is mapped to a specific functionality of a
device, e.g. general I/O queues and read I/O queus of multiqueue block
devices.
The number of interrupts per set is defined by the driver. It depends on
the total number of available interrupts for the device, which is
determined by the PCI capabilites and the availability of underlying CPU
resources, and the number of queues which the device provides and the
driver wants to instantiate.
The driver passes initial configuration for the interrupt allocation via
a pointer to struct irq_affinity.
Right now the allocation mechanism is complex as it requires to have a
loop in the driver to determine the maximum number of interrupts which
are provided by the PCI capabilities and the underlying CPU resources.
This loop would have to be replicated in every driver which wants to
utilize this mechanism. That's unwanted code duplication and error
prone.
In order to move this into generic facilities it is required to have a
mechanism, which allows the recalculation of the interrupt sets and
their size, in the core code. As the core code does not have any
knowledge about the underlying device, a driver specific callback will
be added to struct affinity_desc, which will be invoked by the core
code. The callback will get the number of available interupts as an
argument, so the driver can calculate the corresponding number and size
of interrupt sets.
To support this, two modifications for the handling of struct irq_affinity
are required:
1) The (optional) interrupt sets size information is contained in a
separate array of integers and struct irq_affinity contains a
pointer to it.
This is cumbersome and as the maximum number of interrupt sets is small,
there is no reason to have separate storage. Moving the size array into
struct affinity_desc avoids indirections and makes the code simpler.
2) At the moment the struct irq_affinity pointer which is handed in from
the driver and passed through to several core functions is marked
'const'.
With the upcoming callback to recalculate the number and size of
interrupt sets, it's necessary to remove the 'const'
qualifier. Otherwise the callback would not be able to update the data.
Implement #1 and store the interrupt sets size in 'struct irq_affinity'.
No functional change.
[ tglx: Fixed the memcpy() size so it won't copy beyond the size of the
source. Fixed the kernel doc comments for struct irq_affinity and
de-'This patch'-ed the changelog ]
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: linux-nvme@lists.infradead.org
Cc: linux-pci@vger.kernel.org
Cc: Keith Busch <keith.busch@intel.com>
Cc: Sumit Saxena <sumit.saxena@broadcom.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Shivasharan Srikanteshwara <shivasharan.srikanteshwara@broadcom.com>
Link: https://lkml.kernel.org/r/20190216172228.423723127@linutronix.de
-----BEGIN PGP SIGNATURE-----
iQFRBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlxgqNUeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGwsoH+OVXu0NQofwTvVru
8lgF3BSDG2mhf7mxbBBlBizGVy9jnjRNGCFMC+Jq8IwiFLwprja/G27kaDTkpuF1
PHC3yfjKvjTeUP5aNdHlmxv6j1sSJfZl0y46DQal4UeTG/Giq8TFTi+Tbz7Wb/WV
yCx4Lr8okAwTuNhnL8ojUCVIpd3c8QsyR9v6nEQ14Mj+MvEbokyTkMJV0bzOrM38
JOB+/X1XY4JPZ6o3MoXrBca3bxbAJzMneq+9CWw1U5eiIG3msg4a+Ua3++RQMDNr
8BP0yCZ6wo32S8uu0PI6HrZaBnLYi5g9Wh7Q7yc0mn1Uh1zWFykA6TtqK90agJeR
A6Ktjw==
=scY4
-----END PGP SIGNATURE-----
Merge tag 'v5.0-rc6' into for-5.1/block
Pull in 5.0-rc6 to avoid a dumb merge conflict with fs/iomap.c.
This is needed since io_uring is now based on the block branch,
to avoid a conflict between the multi-page bvecs and the bits
of io_uring that touch the core block parts.
* tag 'v5.0-rc6': (525 commits)
Linux 5.0-rc6
x86/mm: Make set_pmd_at() paravirt aware
MAINTAINERS: Update the ocores i2c bus driver maintainer, etc
blk-mq: remove duplicated definition of blk_mq_freeze_queue
Blk-iolatency: warn on negative inflight IO counter
blk-iolatency: fix IO hang due to negative inflight counter
MAINTAINERS: unify reference to xen-devel list
x86/mm/cpa: Fix set_mce_nospec()
futex: Handle early deadlock return correctly
futex: Fix barrier comment
net: dsa: b53: Fix for failure when irq is not defined in dt
blktrace: Show requests without sector
mips: cm: reprime error cause
mips: loongson64: remove unreachable(), fix loongson_poweroff().
sit: check if IPv6 enabled before calling ip6_err_gen_icmpv6_unreach()
geneve: should not call rt6_lookup() when ipv6 was disabled
KVM: nVMX: unconditionally cancel preemption timer in free_nested (CVE-2019-7221)
KVM: x86: work around leak of uninitialized stack contents (CVE-2019-7222)
kvm: fix kvm_ioctl_create_device() reference counting (CVE-2019-6974)
signal: Better detection of synchronous signals
...
The reset work holds a mutex to prevent races with removal modifying the
same resources, but was unlocking only on success. Unlock on failure
too.
Fixes: 5c959d73db ("nvme-pci: fix rapid add remove sequence")
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
A surprise removal may fail to tear down request queues if it is racing
with the initial asynchronous probe. If that happens, the remove path
won't see the queue resources to tear down, and the controller reset
path may create a new request queue on a removed device, but will not
be able to make forward progress, deadlocking the pci removal.
Protect setting up non-blocking resources from a shutdown by holding the
same mutex, and transition to the CONNECTING state after these resources
are initialized so the probe path may see the dead controller state
before dispatching new IO.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=202081
Reported-by: Alex Gagniuc <Alex_Gagniuc@Dellteam.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Tested-by: Alex Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
If a controller supports the NS Change Notification, the namespace
scan_work is automatically triggered after attaching a new namespace.
Occasionally the namespace scan_work may append the new namespace to the
list before the admin command effects handling is completed. The effects
handling unfreezes namespaces, but if it unfreezes the newly attached
namespace, its request_queue freeze depth will be off and we'll hit the
warning in blk_mq_unfreeze_queue().
On the next namespace add, we will fail to freeze that queue due to the
previous bad accounting and deadlock waiting for frozen.
Fix that by preventing scan work from altering the namespace list while
command effects handling needs to pair freeze with unfreeze.
Reported-by: Wen Xiong <wenxiong@us.ibm.com>
Tested-by: Wen Xiong <wenxiong@us.ibm.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
It is used now just to flush error recovery and reconnect work items in
the RDMA and TCP transports, which can simply be moved to the
corresponding teardown routines.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Allow write zeroes operations (REQ_OP_WRITE_ZEROES) on the block
device, if the device supports an optional command bit set for write
zeroes. Add support to setup write zeroes command. Set maximum possible
write zeroes sectors in one write zeroes command according to
nvme write zeroes command definition.
This patch was posted as a part of block-write-zeroes support
implementation (https://patchwork.kernel.org/patch/9454859/),
but did not make into mainline kernel as it got reverted due to
failure on the Linus's machine.
In this patch in order to be more cautious, we use NVMe controller's
maximum hardware sector size which is calculated based on the
controller's MDTS (Maximum Data Transfer Size) field to calculate
the maximum sectors for the write zeroes request.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
[folded a fix from Keith Busch to properly respect
NVME_QUIRK_DEALLOCATE_ZEROES]
Signed-off-by: Christoph Hellwig <hch@lst.de>
-----BEGIN PGP SIGNATURE-----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=iucY
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20190125' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A collection of fixes for this release. This contains:
- Silence sparse rightfully complaining about non-static wbt
functions (Bart)
- Fixes for the zoned comments/ioctl documentation (Damien)
- direct-io fix that's been lingering for a while (Ernesto)
- cgroup writeback fix (Tejun)
- Set of NVMe patches for nvme-rdma/tcp (Sagi, Hannes, Raju)
- Block recursion tracking fix (Ming)
- Fix debugfs command flag naming for a few flags (Jianchao)"
* tag 'for-linus-20190125' of git://git.kernel.dk/linux-block:
block: Fix comment typo
uapi: fix ioctl documentation
blk-wbt: Declare local functions static
blk-mq: fix the cmd_flag_name array
nvme-multipath: drop optimization for static ANA group IDs
nvmet-rdma: fix null dereference under heavy load
nvme-rdma: rework queue maps handling
nvme-tcp: fix timeout handler
nvme-rdma: fix timeout handler
writeback: synchronize sync(2) against cgroup writeback membership switches
block: cover another queue enter recursion via BIO_QUEUE_ENTERED
direct-io: allow direct writes to empty inodes
Bit 6 in the ANACAP field is used to indicate that the ANA group ID
doesn't change while the namespace is attached to the controller.
There is an optimisation in the code to only allocate space
for the ANA group header, as the namespace list won't change and
hence would not need to be refreshed.
However, this optimisation was never carried over to the actual
workflow, which always assumes that the buffer is large enough
to hold the ANA header _and_ the namespace list.
So drop this optimisation and always allocate enough space.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If the device supports less queues than provided (if the device has less
completion vectors), we might hit a bug due to the fact that we ignore
that in nvme_rdma_map_queues (we override the maps nr_queues with user
opts).
Instead, keep track of how many default/read/poll queues we actually
allocated (rather than asked by the user) and use that to assign our
queue mappings.
Fixes: b65bb777ef (" nvme-rdma: support separate queue maps for read and write")
Reported-by: Saleem, Shiraz <shiraz.saleem@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, we have several problems with the timeout
handler:
1. If we timeout on the controller establishment flow, we will hang
because we don't execute the error recovery (and we shouldn't because
the create_ctrl flow needs to fail and cleanup on its own)
2. We might also hang if we get a disconnet on a queue while the
controller is already deleting. This racy flow can cause the controller
disable/shutdown admin command to hang.
We cannot complete a timed out request from the timeout handler without
mutual exclusion from the teardown flow (e.g. nvme_rdma_error_recovery_work).
So we serialize it in the timeout handler and teardown io and admin
queues to guarantee that no one races with us from completing the
request.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, we have several problems with the timeout
handler:
1. If we timeout on the controller establishment flow, we will hang
because we don't execute the error recovery (and we shouldn't because
the create_ctrl flow needs to fail and cleanup on its own)
2. We might also hang if we get a disconnet on a queue while the
controller is already deleting. This racy flow can cause the controller
disable/shutdown admin command to hang.
We cannot complete a timed out request from the timeout handler without
mutual exclusion from the teardown flow (e.g. nvme_rdma_error_recovery_work).
So we serialize it in the timeout handler and teardown io and admin
queues to guarantee that no one races with us from completing the
request.
Reported-by: Jaesoo Lee <jalee@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When -ENOSPC is returned from pci_alloc_irq_vectors_affinity(),
we still try to allocate multiple irq vectors again, so irq queues
covers the admin queue actually. But we don't consider that, then
number of the allocated irq vector may be same with sum of
io_queues[HCTX_TYPE_DEFAULT] and io_queues[HCTX_TYPE_READ], this way
is obviously wrong, and finally breaks nvme_pci_map_queues(), and
warning from pci_irq_get_affinity() is triggered.
IRQ queues should cover admin queues, this patch makes this
point explicitely in nvme_calc_io_queues().
We got severl boot failure internal report on aarch64, so please
consider to fix it in v4.20.
Fixes: 6451fe73fa ("nvme: fix irq vs io_queue calculations")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Tested-by: fin4478 <fin4478@hotmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=OFV3
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20190112' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request from Christoph, with little fixes all over the map
- Loop caching fix for offset/bs change (Jaegeuk Kim)
- Block documentation tweaks (Jeff, Jon, Weiping, John)
- null_blk zoned tweak (John)
- ahch mvebu suspend/resume support. Should have gone into the merge
window, but there was some confusion on which tree had it. (Miquel)
* tag 'for-linus-20190112' of git://git.kernel.dk/linux-block: (22 commits)
ata: ahci: mvebu: request PHY suspend/resume for Armada 3700
ata: ahci: mvebu: add Armada 3700 initialization needed for S2RAM
ata: ahci: mvebu: do Armada 38x configuration only on relevant SoCs
ata: ahci: mvebu: remove stale comment
ata: libahci_platform: comply to PHY framework
loop: drop caches if offset or block_size are changed
block: fix kerneldoc comment for blk_attempt_plug_merge()
nvme: don't initlialize ctrl->cntlid twice
nvme: introduce NVME_QUIRK_IGNORE_DEV_SUBNQN
nvme: pad fake subsys NQN vid and ssvid with zeros
nvme-multipath: zero out ANA log buffer
nvme-fabrics: unset write/poll queues for discovery controllers
nvme-tcp: don't ask if controller is fabrics
nvme-tcp: remove dead code
nvme-pci: fix out of bounds access in nvme_cqe_pending
nvme-pci: rerun irq setup on IO queue init errors
nvme-pci: use the same attributes when freeing host_mem_desc_bufs.
nvme-pci: fix the wrong setting of nr_maps
block: doc: add slice_idle_us to bfq documentation
block: clarify documentation for blk_{start|finish}_plug
...
ctrl->cntlid will already be initialized from id->cntlid for
non-NVME_F_FABRICS controllers few lines below. For NVME_F_FABRICS
controllers this field should already be initialized, otherwise the
check
if (ctrl->cntlid != le16_to_cpu(id->cntlid))
below will always be a no-op.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
If a device provides an NQN it is expected to be globally unique.
Unfortunately some firmware revisions for Intel 760p/Pro 7600p devices did
not satisfy this requirement. In these circumstances if a system has >1
affected device then only one device is enabled. If this quirk is enabled
then the device supplied subnqn is ignored and we fallback to generating
one as if the field was empty. In this case we also suppress the version
check so we don't print a warning when the quirk is enabled.
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: James Dingwall <james@dingwall.me.uk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We need to preserve the leading zeros in the vid and ssvid when generating
a unique NQN. Truncating these may lead to naming collisions.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When nvme_init_identify() fails the ANA log buffer is deallocated
but _not_ set to NULL. This can cause double free oops when this
controller is deleted without ever being reconnected.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Even if user-space sent it to us, it got it wrong so lets
help by disallowing it.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We should never touch the opal device from the transport driver.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
There is an out of bounds array access in nvme_cqe_peding().
When enable irq_thread for nvme interrupt, there is racing between the
nvmeq->cq_head updating and reading.
nvmeq->cq_head is updated in nvme_update_cq_head(), if nvmeq->cq_head
equals nvmeq->q_depth and before its value set to zero, nvme_cqe_pending()
uses its value as an array index, the index will be out of bounds.
Signed-off-by: Hongbo Yao <yaohongbo@huawei.com>
[hch: slight coding style update]
Signed-off-by: Christoph Hellwig <hch@lst.de>
When using HMB the PCIe host driver allocates host_mem_desc_bufs using
dma_alloc_attrs() but frees them using dma_free_coherent(). Use the
correct dma_free_attrs() function to free the buffers.
Signed-off-by: Liviu Dudau <liviu@dudau.co.uk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We only set the nr_maps to 3 if poll queues are supported.
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We already need to zero out memory for dma_alloc_coherent(), as such
using dma_zalloc_coherent() is superflous. Phase it out.
This change was generated with the following Coccinelle SmPL patch:
@ replace_dma_zalloc_coherent @
expression dev, size, data, handle, flags;
@@
-dma_zalloc_coherent(dev, size, handle, flags)
+dma_alloc_coherent(dev, size, handle, flags)
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
[hch: re-ran the script on the latest tree]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Export the disk name, queue id, sq_head, sq_tail to a trace event in
completion handling.
Usage example:
cd /sys/kernel/debug/tracing/events/nvme/nvme_sq
echo 'disk=="nvme1n1"' > filter
echo 1 > enable
cat /sys/kernel/debug/tracing/trace_pipe
Signed-off-by: yupeng <yupeng0921@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <keith.busch@intel.com>
[hch: slight formatting tweaks, use standard nvme tracepoint
conventions]
Signed-off-by: Christoph Hellwig <hch@lst.de>
wip
When passed with nr_poll_queues setup additional queues with cq polling
context IB_POLL_DIRECT (no interrupts) and make sure to set
QUEUE_FLAG_POLL on the connect_q. In addition add the third queue
mapping for polling queues.
nvmf connect on this queue is polled for like all other requests so make
nvmf_connect_io_queue poll for polling queues.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This argument will specify how many polling I/O queues to connect when
creating the controller. These I/O queues will host I/O that is set with
REQ_HIPRI.
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Preparation for polling support for fabrics. Polling support
means that our completion queues are not generating any interrupts
which means we need to poll for the nvmf io queue connect as well.
Reviewed by Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Pass poll bool to indicate that we need it to poll. This prepares us for
polling support in nvmf since connect is an I/O that will be queued
and has to be polled in order to complete. If poll is passed,
we call nvme_execute_rq_polled which sends the requests and polls
for its completion.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
There is a spelling mistake in a dev_info message, fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
By duplicating the nvme_process_cq in both branches we keep the
sparse lock context checking happy, so do it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
The block layer now enables polling support on a queue if nr_maps
includes the poll map, so we should only set that if we actually
support poll queues.
Fixes: 6544d229bf ("block: enable polling by default if a poll map is initalized")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Now that the block layer checks if a queue map has any queues inside
it there is no more reason to duplicate the maps for the non-default
types.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
llow NVMF_OPT_NR_WRITE_QUEUES to describe additional write queues. In
addition, implement .map_queues that will apply 2 queue maps for read
and write queue sets.
Note that with the separate queue map, HCTX_TYPE_READ will always use
nr_io_queues and HCTX_TYPE_DEFAULT will use nr_write_queues.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Allow NVMF_OPT_NR_WRITE_QUEUES to describe additional write queues. In
addition, implement .map_queues that will apply 2 queue maps for read
and write queue sets.
Note that with the separate queue map, HCTX_TYPE_READ will always use
nr_io_queues and HCTX_TYPE_DEFAULT will use nr_write_queues.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This argument will specify how many I/O queues will be connected in
create_ctrl in addition to nr_io_queues. With this configuration, I/O
that carries payload from the host to the target, will use the default
hctx queue map, and I/O that involves target to host transfers will use
the read hctx queue map.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Will be used by nvme-rdma for queue map separation support.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This is a preparation patch which removes the nvme common command cdw10
array and replace with individual fields. This is needed for the nvmet
error log page implementation make is error log page entry offset
assignment easier.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Israel Rukshin