Using a mask to represent bus DMA constraints has a set of limitations.
The biggest one being it can only hold a power of two (minus one). The
DMA mapping code is already aware of this and treats dev->bus_dma_mask
as a limit. This quirk is already used by some architectures although
still rare.
With the introduction of the Raspberry Pi 4 we've found a new contender
for the use of bus DMA limits, as its PCIe bus can only address the
lower 3GB of memory (of a total of 4GB). This is impossible to represent
with a mask. To make things worse the device-tree code rounds non power
of two bus DMA limits to the next power of two, which is unacceptable in
this case.
In the light of this, rename dev->bus_dma_mask to dev->bus_dma_limit all
over the tree and treat it as such. Note that dev->bus_dma_limit should
contain the higher accessible DMA address.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The valid memory address check in dma_capable only makes sense when mapping
normal memory, not when using dma_map_resource to map a device resource.
Add a new boolean argument to dma_capable to exclude that check for the
dma_map_resource case.
Fixes: b12d66278d ("dma-direct: check for overflows on 32 bit DMA addresses")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Move dma_capable down a bit so that we don't need a forward declaration
for phys_to_dma.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Currently each architectures that wants to override dma_to_phys and
phys_to_dma also has to provide dma_capable. But there isn't really
any good reason for that. powerpc and mips just have copies of the
generic one minus the latests fix, and the arm one was the inspiration
for said fix, but misses the bus_dma_mask handling.
Make all architectures use the generic version instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
As seen on the new Raspberry Pi 4 and sta2x11's DMA implementation it is
possible for a device configured with 32 bit DMA addresses and a partial
DMA mapping located at the end of the address space to overflow. It
happens when a higher physical address, not DMAable, is translated to
it's DMA counterpart.
For example the Raspberry Pi 4, configurable up to 4 GB of memory, has
an interconnect capable of addressing the lower 1 GB of physical memory
with a DMA offset of 0xc0000000. It transpires that, any attempt to
translate physical addresses higher than the first GB will result in an
overflow which dma_capable() can't detect as it only checks for
addresses bigger then the maximum allowed DMA address.
Fix this by verifying in dma_capable() if the DMA address range provided
is at any point lower than the minimum possible DMA address on the bus.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
For dma-direct we know that the DMA address is an encoding of the
physical address that we can trivially decode. Use that fact to
provide implementations that do not need the arch_dma_coherent_to_pfn
architecture hook. Note that we still can only support mmap of
non-coherent memory only if the architecture provides a way to set an
uncached bit in the page tables. This must be true for architectures
that use the generic remap helpers, but other architectures can also
manually select it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
We can just call dma_free_contiguous directly instead of wrapping it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Some architectures, notably ARM, are interested in tweaking this
depending on their runtime DMA addressing limitations.
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
If a device doesn't support DMA to a physical address that includes the
encryption bit (currently bit 47, so 48-bit DMA), then the DMA must
occur to unencrypted memory. SWIOTLB is used to satisfy that requirement
if an IOMMU is not active (enabled or configured in passthrough mode).
However, commit fafadcd165 ("swiotlb: don't dip into swiotlb pool for
coherent allocations") modified the coherent allocation support in
SWIOTLB to use the DMA direct coherent allocation support. When an IOMMU
is not active, this resulted in dma_alloc_coherent() failing for devices
that didn't support DMA addresses that included the encryption bit.
Addressing this requires changes to the force_dma_unencrypted() function
in kernel/dma/direct.c. Since the function is now non-trivial and
SME/SEV specific, update the DMA direct support to add an arch override
for the force_dma_unencrypted() function. The arch override is selected
when CONFIG_AMD_MEM_ENCRYPT is set. The arch override function resides in
the arch/x86/mm/mem_encrypt.c file and forces unencrypted DMA when either
SEV is active or SME is active and the device does not support DMA to
physical addresses that include the encryption bit.
Fixes: fafadcd165 ("swiotlb: don't dip into swiotlb pool for coherent allocations")
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
[hch: moved the force_dma_unencrypted declaration to dma-mapping.h,
fold the s390 fix from Halil Pasic]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Avoid expensive indirect calls in the fast path DMA mapping
operations by directly calling the dma_direct_* ops if we are using
the directly mapped DMA operations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
While the dma-direct code is (relatively) clean and simple we actually
have to use the swiotlb ops for the mapping on many architectures due
to devices with addressing limits. Instead of keeping two
implementations around this commit allows the dma-direct
implementation to call the swiotlb bounce buffering functions and
thus share the guts of the mapping implementation. This also
simplified the dma-mapping setup on a few architectures where we
don't have to differenciate which implementation to use.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Instead of providing a special dma_mark_clean hook just for ia64, switch
ia64 to use the normal arch_sync_dma_for_cpu hooks instead.
This means that we now also set the PG_arch_1 bit for pages in the
swiotlb buffer, which isn't stricly needed as we will never execute code
out of the swiotlb buffer, but otherwise harmless.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
The dma-direct code already returns (~(dma_addr_t)0x0) on mapping
failures, so we can switch over to returning DMA_MAPPING_ERROR and let
the core dma-mapping code handle the rest.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Some architectures support remapping highmem into DMA coherent
allocations. To use the common code for them we need variants of
dma_direct_{alloc,free}_pages that do not use kernel virtual addresses.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
With the overflow buffer removed, we no longer have a unique address
which is guaranteed not to be a valid DMA target to use as an error
token. The DIRECT_MAPPING_ERROR value of 0 tries to at least represent
an unlikely DMA target, but unfortunately there are already SWIOTLB
users with DMA-able memory at physical address 0 which now gets falsely
treated as a mapping failure and leads to all manner of misbehaviour.
The best we can do to mitigate that is flip DIRECT_MAPPING_ERROR to the
other commonly-used error value of all-bits-set, since the last single
byte of memory is by far the least-likely-valid DMA target.
Fixes: dff8d6c1ed ("swiotlb: remove the overflow buffer")
Reported-by: John Stultz <john.stultz@linaro.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Like all other dma mapping drivers just return an error code instead
of an actual memory buffer. The reason for the overflow buffer was
that at the time swiotlb was invented there was no way to check for
dma mapping errors, but this has long been fixed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Instead of rejecting devices with a too small bus_dma_mask we can handle
by taking the bus dma_mask into account for allocations and bounce
buffering decisions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
This is somewhat modelled after the powerpc version, and differs from
the legacy fallback in use fls64 instead of pointlessly splitting up the
address into low and high dwords and in that it takes (__)phys_to_dma
into account.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
All the cache maintainance is already stubbed out when not enabled,
but merging the two allows us to nicely handle the case where
cache maintainance is required for some devices, but not others.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Paul Burton <paul.burton@mips.com> # MIPS parts
Add a new dma_map_ops implementation that uses dma-direct for the
address mapping of streaming mappings, and which requires arch-specific
implemenations of coherent allocate/free.
Architectures have to provide flushing helpers to ownership trasnfers
to the device and/or CPU, and can provide optional implementations of
the coherent mmap functionality, and the cache_flush routines for
non-coherent long term allocations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Alexey Brodkin <abrodkin@synopsys.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Give the basic phys_to_dma() and dma_to_phys() helpers a __-prefix and add
the memory encryption mask to the non-prefixed versions. Use the
__-prefixed versions directly instead of clearing the mask again in
various places.
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Muli Ben-Yehuda <mulix@mulix.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/20180319103826.12853-13-hch@lst.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
So that they don't need to indirect through the operation vector.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
And unlike the other helpers we don't require a <asm/dma-direct.h> as
this helper is a special case for ia64 only, and this keeps it as
simple as possible.
Signed-off-by: Christoph Hellwig <hch@lst.de>
phys_to_dma, dma_to_phys and dma_capable are helpers published by
architecture code for use of swiotlb and xen-swiotlb only. Drivers are
not supposed to use these directly, but use the DMA API instead.
Move these to a new asm/dma-direct.h helper, included by a
linux/dma-direct.h wrapper that provides the default linear mapping
unless the architecture wants to override it.
In the MIPS case the existing dma-coherent.h is reused for now as
untangling it will take a bit of work.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Nicolas Saenz Julienne