[ Upstream commit c184cf94e73b04ff7048d045f5413899bc664788 ]
Do not attach SQI value if link is down. "SQI values are only valid if
link-up condition is present" per OpenAlliance specification of
100Base-T1 Interoperability Test suite [1]. The same rule would apply
for other link types.
[1] https://opensig.org/automotive-ethernet-specifications/#
Fixes: 8066021915 ("ethtool: provide UAPI for PHY Signal Quality Index (SQI)")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Woojung Huh <woojung.huh@microchip.com>
Link: https://patch.msgid.link/20240709061943.729381-1-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f1172f3ee3a98754d95b968968920a7d03fdebcc ]
Accessing an ethernet device that is powered off or clock gated might
cause the CPU to hang. Add ethnl_ops_begin/complete in
ethnl_set_features() to protect against this.
Fixes: 0980bfcd69 ("ethtool: set netdev features with FEATURES_SET request")
Signed-off-by: Ludvig Pärsson <ludvig.parsson@axis.com>
Link: https://lore.kernel.org/r/20240117-etht2-v2-1-1a96b6e8c650@axis.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cbeb989e41f4094f54bec2cecce993f26f547bea ]
The default dump handler needs to clear ret before returning.
Otherwise if the last interface returns an inconsequential
error this error will propagate to user space.
This may confuse user space (ethtool CLI seems to ignore it,
but YNL doesn't). It will also terminate the dump early
for mutli-skb dump, because netlink core treats EOPNOTSUPP
as a real error.
Fixes: 728480f124 ("ethtool: default handlers for GET requests")
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231126225806.2143528-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This reverts commit 108a36d07c.
It was reported that this fix breaks the possibility to remove existing WoL
flags. For example:
~$ ethtool lan2
...
Supports Wake-on: pg
Wake-on: d
...
~$ ethtool -s lan2 wol gp
~$ ethtool lan2
...
Wake-on: pg
...
~$ ethtool -s lan2 wol d
~$ ethtool lan2
...
Wake-on: pg
...
This worked correctly before this commit because we were always updating
a zero bitmap (since commit 6699170376 ("ethtool: fix application of
verbose no_mask bitset"), that is) so that the rest was left zero
naturally. But now the 1->0 change (old_val is true, bit not present in
netlink nest) no longer works.
Reported-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Closes: https://lore.kernel.org/netdev/20231019095140.l6fffnszraeb6iiw@lion.mk-sys.cz/
Cc: stable@vger.kernel.org
Fixes: 108a36d07c ("ethtool: Fix mod state of verbose no_mask bitset")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Link: https://lore.kernel.org/r/20231019-feature_ptp_bitset_fix-v1-1-70f3c429a221@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A bitset without mask in a _SET request means we want exactly the bits in
the bitset to be set. This works correctly for compact format but when
verbose format is parsed, ethnl_update_bitset32_verbose() only sets the
bits present in the request bitset but does not clear the rest. The commit
6699170376 fixes this issue by clearing the whole target bitmap before we
start iterating. The solution proposed brought an issue with the behavior
of the mod variable. As the bitset is always cleared the old val will
always differ to the new val.
Fix it by adding a new temporary variable which save the state of the old
bitmap.
Fixes: 6699170376 ("ethtool: fix application of verbose no_mask bitset")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231009133645.44503-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ETHTOOL_A_PLCA_ENABLED data type is u8. But while parsing the
value from the attribute, nla_get_u32() is used in the plca_update_sint()
function instead of nla_get_u8(). So plca_cfg.enabled variable is updated
with some garbage value instead of 0 or 1 and always enables plca even
though plca is disabled through ethtool application. This bug has been
fixed by parsing the values based on the attributes type in the policy.
Fixes: 8580e16c28 ("net/ethtool: add netlink interface for the PLCA RS")
Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230908044548.5878-1-Parthiban.Veerasooran@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We had a number of bugs in the past because developers forgot
to fully test dumps, which pass NULL as info to .prepare_data.
.prepare_data implementations would try to access info->extack
leading to a null-deref.
Now that dumps and notifications can access struct genl_info
we can pass it in, and remove the info null checks.
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # pause
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230814214723.2924989-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since dumps carry struct genl_info now, use the attrs pointer
from genl_info and remove the one in struct genl_dumpit_info.
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230814214723.2924989-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
phy_init() and phy_exit() will have to do more stuff under rtnl_lock()
in a future change. Since rtnl_unlock() -> netdev_run_todo() does a lot
of stuff under the hood, it's a pity to lock and unlock the rtnetlink
mutex twice in a row.
Change the calling convention such that the only caller of
ethtool_set_ethtool_phy_ops(), phy_device.c, provides a context where
the rtnl_mutex is already acquired.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230801142824.1772134-11-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As 32bits of dissector->used_keys are exhausted,
increase the size to 64bits.
This is base change for ESP/AH flow dissector patch.
Please find patch and discussions at
https://lore.kernel.org/netdev/ZMDNjD46BvZ5zp5I@corigine.com/T/#t
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Tested-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reap the benefits of easier iteration thanks to the xarray.
Convert just the genetlink ones, those are easier to test.
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230726185530.2247698-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ETHTOOL_GRXFH correctly copies in the full struct ethtool_rxnfc when
FLOW_RSS is set; ETHTOOL_SRXFH needs a similar code path to handle the
FLOW_RSS case so that ethtool can set the flow hash for custom RSS
contexts (if supported by the driver).
The copy code from ETHTOOL_GRXFH has been pulled out in to a helper so
that it can be called in both ETHTOOL_{G,S}RXFH code paths.
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
New users of dev_get_by_index() and dev_get_by_name() keep
getting added and it would be nice to steer them towards
the APIs with reference tracking.
Add variants of those calls which allocate the reference
tracker and use them in a couple of places.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
sopass won't be set if wolopt doesn't change. This means the following
will fail to set the correct sopass.
ethtool -s eth0 wol s sopass 11:22:33:44:55:66
ethtool -s eth0 wol s sopass 22:44:55:66:77:88
Make sure we call into the driver layer set_wol if sopass is different.
Fixes: 55b24334c0 ("ethtool: ioctl: improve error checking for set_wol")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Link: https://lore.kernel.org/r/1686605822-34544-1-git-send-email-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ethtool currently requires a header nest (which is used to carry
the common family options) in all requests including dumps.
$ cli.py --spec netlink/specs/ethtool.yaml --dump channels-get
lib.ynl.NlError: Netlink error: Invalid argument
nl_len = 64 (48) nl_flags = 0x300 nl_type = 2
error: -22 extack: {'msg': 'request header missing'}
$ cli.py --spec netlink/specs/ethtool.yaml --dump channels-get \
--json '{"header":{}}'; )
[{'combined-count': 1,
'combined-max': 1,
'header': {'dev-index': 2, 'dev-name': 'enp1s0'}}]
Requiring the header nest to always be there may seem nice
from the consistency perspective, but it's not serving any
practical purpose. We shouldn't burden the user like this.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The netlink version of set_wol checks for not supported wolopts and avoids
setting wol when the correct wolopt is already set. If we do the same with
the ioctl version then we can remove these checks from the driver layer.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/1686179653-29750-1-git-send-email-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is not possible to set the number of lanes when setting link modes
using the legacy IOCTL ethtool interface. Since 'struct
ethtool_link_ksettings' is not initialized in this path, drivers receive
an uninitialized number of lanes in 'struct
ethtool_link_ksettings::lanes'.
When this information is later queried from drivers, it results in the
ethtool code making decisions based on uninitialized memory, leading to
the following KMSAN splat [1]. In practice, this most likely only
happens with the tun driver that simply returns whatever it got in the
set operation.
As far as I can tell, this uninitialized memory is not leaked to user
space thanks to the 'ethtool_ops->cap_link_lanes_supported' check in
linkmodes_prepare_data().
Fix by initializing the structure in the IOCTL path. Did not find any
more call sites that pass an uninitialized structure when calling
'ethtool_ops::set_link_ksettings()'.
[1]
BUG: KMSAN: uninit-value in ethnl_update_linkmodes net/ethtool/linkmodes.c:273 [inline]
BUG: KMSAN: uninit-value in ethnl_set_linkmodes+0x190b/0x19d0 net/ethtool/linkmodes.c:333
ethnl_update_linkmodes net/ethtool/linkmodes.c:273 [inline]
ethnl_set_linkmodes+0x190b/0x19d0 net/ethtool/linkmodes.c:333
ethnl_default_set_doit+0x88d/0xde0 net/ethtool/netlink.c:640
genl_family_rcv_msg_doit net/netlink/genetlink.c:968 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1048 [inline]
genl_rcv_msg+0x141a/0x14c0 net/netlink/genetlink.c:1065
netlink_rcv_skb+0x3f8/0x750 net/netlink/af_netlink.c:2577
genl_rcv+0x40/0x60 net/netlink/genetlink.c:1076
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0xf41/0x1270 net/netlink/af_netlink.c:1365
netlink_sendmsg+0x127d/0x1430 net/netlink/af_netlink.c:1942
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg net/socket.c:747 [inline]
____sys_sendmsg+0xa24/0xe40 net/socket.c:2501
___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2555
__sys_sendmsg net/socket.c:2584 [inline]
__do_sys_sendmsg net/socket.c:2593 [inline]
__se_sys_sendmsg net/socket.c:2591 [inline]
__x64_sys_sendmsg+0x36b/0x540 net/socket.c:2591
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Uninit was stored to memory at:
tun_get_link_ksettings+0x37/0x60 drivers/net/tun.c:3544
__ethtool_get_link_ksettings+0x17b/0x260 net/ethtool/ioctl.c:441
ethnl_set_linkmodes+0xee/0x19d0 net/ethtool/linkmodes.c:327
ethnl_default_set_doit+0x88d/0xde0 net/ethtool/netlink.c:640
genl_family_rcv_msg_doit net/netlink/genetlink.c:968 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1048 [inline]
genl_rcv_msg+0x141a/0x14c0 net/netlink/genetlink.c:1065
netlink_rcv_skb+0x3f8/0x750 net/netlink/af_netlink.c:2577
genl_rcv+0x40/0x60 net/netlink/genetlink.c:1076
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0xf41/0x1270 net/netlink/af_netlink.c:1365
netlink_sendmsg+0x127d/0x1430 net/netlink/af_netlink.c:1942
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg net/socket.c:747 [inline]
____sys_sendmsg+0xa24/0xe40 net/socket.c:2501
___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2555
__sys_sendmsg net/socket.c:2584 [inline]
__do_sys_sendmsg net/socket.c:2593 [inline]
__se_sys_sendmsg net/socket.c:2591 [inline]
__x64_sys_sendmsg+0x36b/0x540 net/socket.c:2591
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Uninit was stored to memory at:
tun_set_link_ksettings+0x37/0x60 drivers/net/tun.c:3553
ethtool_set_link_ksettings+0x600/0x690 net/ethtool/ioctl.c:609
__dev_ethtool net/ethtool/ioctl.c:3024 [inline]
dev_ethtool+0x1db9/0x2a70 net/ethtool/ioctl.c:3078
dev_ioctl+0xb07/0x1270 net/core/dev_ioctl.c:524
sock_do_ioctl+0x295/0x540 net/socket.c:1213
sock_ioctl+0x729/0xd90 net/socket.c:1316
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl+0x222/0x400 fs/ioctl.c:856
__x64_sys_ioctl+0x96/0xe0 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Local variable link_ksettings created at:
ethtool_set_link_ksettings+0x54/0x690 net/ethtool/ioctl.c:577
__dev_ethtool net/ethtool/ioctl.c:3024 [inline]
dev_ethtool+0x1db9/0x2a70 net/ethtool/ioctl.c:3078
Fixes: 012ce4dd31 ("ethtool: Extend link modes settings uAPI with lanes")
Reported-and-tested-by: syzbot+ef6edd9f1baaa54d6235@syzkaller.appspotmail.com
Link: https://lore.kernel.org/netdev/0000000000004bb41105fa70f361@google.com/
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SET_COALESCE may change operation mode and parameters in one call.
Changing operation mode may cause the driver to reset the parameter
values to what is a reasonable default for new operation mode.
Since driver does not know which parameters come from user and which
are echoed back from ->get, driver may ignore the parameters when
switching operation modes.
This used to be inevitable for ioctl() but in netlink we know which
parameters are actually specified by the user.
We could inform which parameters were set by the user but this would
lead to a lot of code duplication in the drivers. Instead try to call
the drivers twice if both mode and params are changed. The set method
already checks if any params need updating so in case the driver did
the right thing the first time around - there will be no second call
to it's ->set method (only an extra call to ->get()).
For mlx5 for example before this patch we'd see:
# ethtool -C eth0 adaptive-rx on adaptive-tx on
# ethtool -C eth0 adaptive-rx off adaptive-tx off \
tx-usecs 123 rx-usecs 123
Adaptive RX: off TX: off
rx-usecs: 3
rx-frames: 32
tx-usecs: 16
tx-frames: 32
[...]
After the change:
# ethtool -C eth0 adaptive-rx on adaptive-tx on
# ethtool -C eth0 adaptive-rx off adaptive-tx off \
tx-usecs 123 rx-usecs 123
Adaptive RX: off TX: off
rx-usecs: 123
rx-frames: 32
tx-usecs: 123
tx-frames: 32
[...]
This only works for netlink, so it's a small discrepancy between
netlink and ioctl(). Since we anticipate most users to move to
netlink I believe it's worth making their lives easier.
Link: https://lore.kernel.org/r/20230420233302.944382-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The verify-enabled boolean (ETHTOOL_A_MM_VERIFY_ENABLED) was intended to
be a sub-setting of tx-enabled (ETHTOOL_A_MM_TX_ENABLED). IOW, MAC Merge
TX can be enabled with or without verification, but verification with TX
disabled makes no sense.
The pmac-enabled boolean (ETHTOOL_A_MM_PMAC_ENABLED) was intended to be
a global toggle from an API perspective, whereas tx-enabled just handles
the TX direction. IOW, the pMAC can be enabled with or without TX, but
it doesn't make sense to enable TX if the pMAC is not enabled.
Add two checks which sanitize and reject these invalid cases.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Create a wrapper over __ethtool_dev_mm_supported() which also calls
ethnl_ops_begin() and ethnl_ops_complete(). It can be used by other code
layers, such as tc, to make sure that preemptible TCs are supported
(this is true if an underlying MAC Merge layer exists).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the number of lanes was forced and then subsequently the user
omits this parameter, the ksettings->lanes is reset. The driver
should then reset the number of lanes to the device's default
for the specified speed.
However, although the ksettings->lanes is set to 0, the mod variable
is not set to true to indicate the driver and userspace should be
notified of the changes.
The consequence is that the same ethtool operation will produce
different results based on the initial state.
If the initial state is:
$ ethtool swp1 | grep -A 3 'Speed: '
Speed: 500000Mb/s
Lanes: 2
Duplex: Full
Auto-negotiation: on
then executing 'ethtool -s swp1 speed 50000 autoneg off' will yield:
$ ethtool swp1 | grep -A 3 'Speed: '
Speed: 500000Mb/s
Lanes: 2
Duplex: Full
Auto-negotiation: off
While if the initial state is:
$ ethtool swp1 | grep -A 3 'Speed: '
Speed: 500000Mb/s
Lanes: 1
Duplex: Full
Auto-negotiation: off
executing the same 'ethtool -s swp1 speed 50000 autoneg off' results in:
$ ethtool swp1 | grep -A 3 'Speed: '
Speed: 500000Mb/s
Lanes: 1
Duplex: Full
Auto-negotiation: off
This patch fixes this behavior. Omitting lanes will always results in
the driver choosing the default lane width for the chosen speed. In this
scenario, regardless of the initial state, the end state will be, e.g.,
$ ethtool swp1 | grep -A 3 'Speed: '
Speed: 500000Mb/s
Lanes: 2
Duplex: Full
Auto-negotiation: off
Fixes: 012ce4dd31 ("ethtool: Extend link modes settings uAPI with lanes")
Signed-off-by: Andy Roulin <aroulin@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/ac238d6b-8726-8156-3810-6471291dbc7f@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some code defines the IPv6 wildcard address as a local variable and
use it with memcmp() or ipv6_addr_equal().
Let's use in6addr_any and ipv6_addr_any() instead.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This attribute, which is part of ethtool's ring param configuration
allows the user to specify the maximum number of the packet's payload
that can be written directly to the device.
Example usage:
# ethtool -G [interface] tx-push-buf-len [number of bytes]
Co-developed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to what was done for TX_PUSH, add an RX_PUSH concept
to the ethtool interfaces.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If ops->get_mm() returns a non-zero error code, we goto out_complete,
but there, we return 0. Fix that to propagate the "ret" variable to the
caller. If ops->get_mm() succeeds, it will always return 0.
Fixes: 2b30f8291a ("net: ethtool: add support for MAC Merge layer")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230206094932.446379-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Convert all SET commands where new common code is applicable.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Most ethtool SET callbacks follow the same general structure.
ethnl_parse_header_dev_get()
rtnl_lock()
ethnl_ops_begin()
... do stuff ...
ethtool_notify()
ethnl_ops_complete()
rtnl_unlock()
ethnl_parse_header_dev_put()
This leads to a lot of copy / pasted code an bugs when people
mis-handle the error path.
Add a generic implementation of this pattern with a .set callback
in struct ethnl_request_ops called to "do stuff".
Also add an optional .set_validate which is called before
ethnl_ops_begin() -- a lot of implementations do basic request
capability / sanity checking at that point.
Because we want to avoid generating the notification when
no change happened - adopt a slightly hairy return values:
- 0 means nothing to do (no notification)
- 1 means done / continue
- negative error codes on error
Reuse .hdr_attr from struct ethnl_request_ops, GET and SET
use the same attr spaces in all cases.
Convert pause as an example (and to avoid unused function warnings).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the following call path:
ethnl_default_dumpit
-> ethnl_default_dump_one
-> ctx->ops->prepare_data
-> pause_prepare_data
struct genl_info *info will be passed as NULL, and pause_prepare_data()
dereferences it while getting the extended ack pointer.
To avoid that, just set the extack to NULL if "info" is NULL, since the
netlink extack handling messages know how to deal with that.
The pattern "info ? info->extack : NULL" is present in quite a few other
"prepare_data" implementations, so it's clear that it's a more general
problem to be dealt with at a higher level, but the code should have at
least adhered to the current conventions to avoid the NULL dereference.
Fixes: 04692c9020 ("net: ethtool: netlink: retrieve stats from multiple sources (eMAC, pMAC)")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reported-by: syzbot+9d44aae2720fc40b8474@syzkaller.appspotmail.com
Signed-off-by: David S. Miller <davem@davemloft.net>
In the following call path:
ethnl_default_dumpit
-> ethnl_default_dump_one
-> ctx->ops->prepare_data
-> stats_prepare_data
struct genl_info *info will be passed as NULL, and stats_prepare_data()
dereferences it while getting the extended ack pointer.
To avoid that, just set the extack to NULL if "info" is NULL, since the
netlink extack handling messages know how to deal with that.
The pattern "info ? info->extack : NULL" is present in quite a few other
"prepare_data" implementations, so it's clear that it's a more general
problem to be dealt with at a higher level, but the code should have at
least adhered to the current conventions to avoid the NULL dereference.
Fixes: 04692c9020 ("net: ethtool: netlink: retrieve stats from multiple sources (eMAC, pMAC)")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a pMAC exists but the driver is unable to atomically query the
aggregate eMAC+pMAC statistics, the user should be given back at least
the sum of eMAC and pMAC counters queried separately.
This is a generic problem, so add helpers in ethtool to do this
operation, if the driver doesn't have a better way to report aggregate
stats. Do this in a way that does not require changes to these functions
when new stats are added (basically treat the structures as an array of
u64 values, except for the first element which is the stats source).
In include/linux/ethtool.h, there is already a section where helper
function prototypes should be placed. The trouble is, this section is
too early, before the definitions of struct ethtool_eth_mac_stats et.al.
Move that section at the end and append these new helpers to it.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IEEE 802.3-2018 clause 99 defines a MAC Merge sublayer which contains an
Express MAC and a Preemptible MAC. Both MACs are hidden to higher and
lower layers and visible as a single MAC (packet classification to eMAC
or pMAC on TX is done based on priority; classification on RX is done
based on SFD).
For devices which support a MAC Merge sublayer, it is desirable to
retrieve individual packet counters from the eMAC and the pMAC, as well
as aggregate statistics (their sum).
Introduce a new ETHTOOL_A_STATS_SRC attribute which is part of the
policy of ETHTOOL_MSG_STATS_GET and, and an ETHTOOL_A_PAUSE_STATS_SRC
which is part of the policy of ETHTOOL_MSG_PAUSE_GET (accepted when
ETHTOOL_FLAG_STATS is set in the common ethtool header). Both of these
take values from enum ethtool_mac_stats_src, defaulting to "aggregate"
in the absence of the attribute.
Existing drivers do not need to pay attention to this enum which was
added to all driver-facing structures, just the ones which report the
MAC merge layer as supported.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MAC merge sublayer (IEEE 802.3-2018 clause 99) is one of 2
specifications (the other being Frame Preemption; IEEE 802.1Q-2018
clause 6.7.2), which work together to minimize latency caused by frame
interference at TX. The overall goal of TSN is for normal traffic and
traffic with a bounded deadline to be able to cohabitate on the same L2
network and not bother each other too much.
The standards achieve this (partly) by introducing the concept of
preemptible traffic, i.e. Ethernet frames that have a custom value for
the Start-of-Frame-Delimiter (SFD), and these frames can be fragmented
and reassembled at L2 on a link-local basis. The non-preemptible frames
are called express traffic, they are transmitted using a normal SFD, and
they can preempt preemptible frames, therefore having lower latency,
which can matter at lower (100 Mbps) link speeds, or at high MTUs (jumbo
frames around 9K). Preemption is not recursive, i.e. a P frame cannot
preempt another P frame. Preemption also does not depend upon priority,
or otherwise said, an E frame with prio 0 will still preempt a P frame
with prio 7.
In terms of implementation, the standards talk about the presence of an
express MAC (eMAC) which handles express traffic, and a preemptible MAC
(pMAC) which handles preemptible traffic, and these MACs are multiplexed
on the same MII by a MAC merge layer.
To support frame preemption, the definition of the SFD was generalized
to SMD (Start-of-mPacket-Delimiter), where an mPacket is essentially an
Ethernet frame fragment, or a complete frame. Stations unaware of an SMD
value different from the standard SFD will treat P frames as error
frames. To prevent that from happening, a negotiation process is
defined.
On RX, packets are dispatched to the eMAC or pMAC after being filtered
by their SMD. On TX, the eMAC/pMAC classification decision is taken by
the 802.1Q spec, based on packet priority (each of the 8 user priority
values may have an admin-status of preemptible or express).
The MAC Merge layer and the Frame Preemption parameters have some degree
of independence in terms of how software stacks are supposed to deal
with them. The activation of the MM layer is supposed to be controlled
by an LLDP daemon (after it has been communicated that the link partner
also supports it), after which a (hardware-based or not) verification
handshake takes place, before actually enabling the feature. So the
process is intended to be relatively plug-and-play. Whereas FP settings
are supposed to be coordinated across a network using something
approximating NETCONF.
The support contained here is exclusively for the 802.3 (MAC Merge)
portions and not for the 802.1Q (Frame Preemption) parts. This API is
sufficient for an LLDP daemon to do its job. The FP adminStatus variable
from 802.1Q is outside the scope of an LLDP daemon.
I have taken a few creative licenses and augmented the Linux kernel UAPI
compared to the standard managed objects recommended by IEEE 802.3.
These are:
- ETHTOOL_A_MM_PMAC_ENABLED: According to Figure 99-6: Receive
Processing state diagram, a MAC Merge layer is always supposed to be
able to receive P frames. However, this implies keeping the pMAC
powered on, which will consume needless power in applications where FP
will never be used. If LLDP is used, the reception of an Additional
Ethernet Capabilities TLV from the link partner is sufficient
indication that the pMAC should be enabled. So my proposal is that in
Linux, we keep the pMAC turned off by default and that user space
turns it on when needed.
- ETHTOOL_A_MM_VERIFY_ENABLED: The IEEE managed object is called
aMACMergeVerifyDisableTx. I opted for consistency (positive logic) in
the boolean netlink attributes offered, so this is also positive here.
Other than the meaning being reversed, they correspond to the same
thing.
- ETHTOOL_A_MM_MAX_VERIFY_TIME: I found it most reasonable for a LLDP
daemon to maximize the verifyTime variable (delay between SMD-V
transmissions), to maximize its chances that the LP replies. IEEE says
that the verifyTime can range between 1 and 128 ms, but the NXP ENETC
stupidly keeps this variable in a 7 bit register, so the maximum
supported value is 127 ms. I could have chosen to hardcode this in the
LLDP daemon to a lower value, but why not let the kernel expose its
supported range directly.
- ETHTOOL_A_MM_TX_MIN_FRAG_SIZE: the standard managed object is called
aMACMergeAddFragSize, and expresses the "additional" fragment size
(on top of ETH_ZLEN), whereas this expresses the absolute value of the
fragment size.
- ETHTOOL_A_MM_RX_MIN_FRAG_SIZE: there doesn't appear to exist a managed
object mandated by the standard, but user space clearly needs to know
what is the minimum supported fragment size of our local receiver,
since LLDP must advertise a value no lower than that.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Revert a wrong fix that was done during the review process. The
intention was to substitute "if(ret < 0)" with "if(ret)".
Unfortunately, the intended fix did not meet the code.
Besides, after additional review, it was decided that "if(ret < 0)"
was actually the right thing to do.
Fixes: 8580e16c28 ("net/ethtool: add netlink interface for the PLCA RS")
Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/f2277af8951a51cfee2fb905af8d7a812b7beaf4.1673616357.git.piergiorgio.beruto@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the following ethtool tx aggregation parameters:
ETHTOOL_A_COALESCE_TX_AGGR_MAX_BYTES
Maximum size in bytes of a tx aggregated block of frames.
ETHTOOL_A_COALESCE_TX_AGGR_MAX_FRAMES
Maximum number of frames that can be aggregated into a block.
ETHTOOL_A_COALESCE_TX_AGGR_TIME_USECS
Time in usecs after the first packet arrival in an aggregated
block for the block to be sent.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current code for RSS_GET ethtool command includes netlink attributes
in reply message to user space even if they are null. Added checks
to include netlink attribute in reply message only if a value is
received from driver. Drivers might return null for RSS indirection
table or hash key. Instead of including attributes with empty value
in the reply message, add netlink attribute only if there is content.
Fixes: 7112a04664 ("ethtool: add netlink based get rss support")
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Link: https://lore.kernel.org/r/20230111235607.85509-1-sudheer.mogilappagari@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds the link modes for the IEEE 802.3cg Clause 147 10BASE-T1S
Ethernet PHY. According to the specifications, the 10BASE-T1S supports
Point-To-Point Full-Duplex, Point-To-Point Half-Duplex and/or
Point-To-Multipoint (AKA Multi-Drop) Half-Duplex operations.
Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for configuring the PLCA Reconciliation Sublayer on
multi-drop PHYs that support IEEE802.3cg-2019 Clause 148 (e.g.,
10BASE-T1S). This patch adds the appropriate netlink interface
to ethtool.
Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
So that it's easier to follow and make sense of the branching and
various conditions.
Stats retrieval has been split into two separate functions
ethtool_get_phy_stats_phydev & ethtool_get_phy_stats_ethtool.
The former attempts to retrieve the stats using phydev & phy_ops, while
the latter uses ethtool_ops.
Actual n_stats validation & array allocation has been moved into a new
ethtool_vzalloc_stats_array helper.
This also fixes a potential NULL dereference of
ops->get_ethtool_phy_stats where it was getting called in an else branch
unconditionally without making sure it was actually present.
Found by Linux Verification Center (linuxtesting.org) with the SVACE
static analysis tool.
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that we always early return if we don't have any stats we can remove
these checks as they're no longer necessary.
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
It's not very useful to copy back an empty ethtool_stats struct and
return 0 if we didn't actually have any stats. This also allows for
further simplification of this function in the future commits.
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add an option to initialize SOF_TIMESTAMPING_OPT_ID for TCP from
write_seq sockets instead of snd_una.
This should have been the behavior from the start. Because processes
may now exist that rely on the established behavior, do not change
behavior of the existing option, but add the right behavior with a new
flag. It is encouraged to always set SOF_TIMESTAMPING_OPT_ID_TCP on
stream sockets along with the existing SOF_TIMESTAMPING_OPT_ID.
Intuitively the contract is that the counter is zero after the
setsockopt, so that the next write N results in a notification for
the last byte N - 1.
On idle sockets snd_una == write_seq and this holds for both. But on
sockets with data in transmission, snd_una records the unacked offset
in the stream. This depends on the ACK response from the peer. A
process cannot learn this in a race free manner (ioctl SIOCOUTQ is one
racy approach).
write_seq records the offset at the last byte written by the process.
This is a better starting point. It matches the intuitive contract in
all circumstances, unaffected by external behavior.
The new timestamp flag necessitates increasing sk_tsflags to 32 bits.
Move the field in struct sock to avoid growing the socket (for some
common CONFIG variants). The UAPI interface so_timestamping.flags is
already int, so 32 bits wide.
Reported-by: Sotirios Delimanolis <sotodel@meta.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20221207143701.29861-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add netlink based support for "ethtool -x <dev> [context x]"
command by implementing ETHTOOL_MSG_RSS_GET netlink message.
This is equivalent to functionality provided via ETHTOOL_GRSSH
in ioctl path. It sends RSS table, hash key and hash function
of an interface to user space.
This patch implements existing functionality available
in ioctl path and enables addition of new RSS context
based parameters in future.
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Link: https://lore.kernel.org/r/20221202002555.241580-1-sudheer.mogilappagari@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The value of an arithmetic expression "n * id.data" is subject
to possible overflow due to a failure to cast operands to a larger data
type before performing arithmetic. Used macro for multiplication instead
operator for avoiding overflow.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Maxim Korotkov <korotkov.maxim.s@gmail.com>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221122122901.22294-1-korotkov.maxim.s@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Oleksij Rempel