[ Upstream commit 3a96378e22cc46c7c49b5911f6c8631527a133a9 ]
When checking for concurrent CQE posting, we're not only interested in
requests running from the poll handler but also strayed requests ended
up in normal io-wq execution. We're disallowing multishots in general
from io-wq, not only when they came in a certain way.
Cc: stable@vger.kernel.org
Fixes: 17add5cea2 ("io_uring: force multishot CQEs into task context")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/d8c5b36a39258036f93301cd60d3cd295e40653d.1709905727.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit deaef31bc1ec7966698a427da8c161930830e1cf ]
If we loop for multishot receive on the initial attempt, and then abort
later on to wait for more, we miss a case where we should be copying the
io_async_msghdr from the stack to stable storage. This leads to the next
retry potentially failing, if the application had the msghdr on the
stack.
Cc: stable@vger.kernel.org
Fixes: 9bb66906f2 ("io_uring: support multishot in recvmsg")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86bcacc957fc2d0403aa0e652757eec59a5fd7ca ]
The namelen is of type int. It shouldn't be made size_t which is
unsigned. The signed number is needed for error checking before use.
Fixes: c55978024d12 ("io_uring/net: move receive multishot out of the generic msghdr path")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20240301144349.2807544-1-usama.anjum@collabora.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ede3db5061bb1fe28e2c9683329aafa89d2b1b4 ]
The "controllen" variable is type size_t (unsigned long). Casting it
to int could lead to an integer underflow.
The check_add_overflow() function considers the type of the destination
which is type int. If we add two positive values and the result cannot
fit in an integer then that's counted as an overflow.
However, if we cast "controllen" to an int and it turns negative, then
negative values *can* fit into an int type so there is no overflow.
Good: 100 + (unsigned long)-4 = 96 <-- overflow
Bad: 100 + (int)-4 = 96 <-- no overflow
I deleted the cast of the sizeof() as well. That's not a bug but the
cast is unnecessary.
Fixes: 9b0fc3c054 ("io_uring: fix types in io_recvmsg_multishot_overflow")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/138bd2e2-ede8-4bcc-aa7b-f3d9de167a37@moroto.mountain
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c55978024d123d43808ab393a0a4ce3ce8568150 ]
Move the actual user_msghdr / compat_msghdr into the send and receive
sides, respectively, so we can move the uaddr receive handling into its
own handler, and ditto the multishot with buffer selection logic.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 8ede3db5061b ("io_uring/net: fix overflow check in io_recvmsg_mshot_prep()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 52307ac4f2b507f60bae6df5be938d35e199c688 ]
For recvmsg, we roll our own since we support buffer selections. This
isn't the case for sendmsg right now, but in preparation for doing so,
make the recvmsg copy helpers generic so we can call them from the
sendmsg side as well.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 8ede3db5061b ("io_uring/net: fix overflow check in io_recvmsg_mshot_prep()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a37ee9e117ef73bbc2f5c0b31911afd52d229861 upstream.
If we hit CQ ring overflow when attempting to post a multishot accept
completion, we don't properly save the result or return code. This
results in losing the accepted fd value.
Instead, we return the result from the poll operation that triggered
the accept retry. This is generally POLLIN|POLLPRI|POLLRDNORM|POLLRDBAND
which is 0xc3, or 195, which looks like a valid file descriptor, but it
really has no connection to that.
Handle this like we do for other multishot completions - assign the
result, and return IOU_STOP_MULTISHOT to cancel any further completions
from this request when overflow is hit. This preserves the result, as we
should, and tells the application that the request needs to be re-armed.
Cc: stable@vger.kernel.org
Fixes: 515e269612 ("io_uring: revert "io_uring fix multishot accept ordering"")
Link: https://github.com/axboe/liburing/issues/1062
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 76b367a2d83163cf19173d5cb0b562acbabc8eac upstream.
If we have multiple clients and some/all are flooding the receives to
such an extent that we can retry a LOT handling multishot receives, then
we can be starving some clients and hence serving traffic in an
imbalanced fashion.
Limit multishot retry attempts to some arbitrary value, whose only
purpose serves to ensure that we don't keep serving a single connection
for way too long. We default to 32 retries, which should be more than
enough to provide fairness, yet not so small that we'll spend too much
time requeuing rather than handling traffic.
Cc: stable@vger.kernel.org
Depends-on: 704ea888d646 ("io_uring/poll: add requeue return code from poll multishot handling")
Depends-on: 1e5d765a82f ("io_uring/net: un-indent mshot retry path in io_recv_finish()")
Depends-on: e84b01a880f6 ("io_uring/poll: move poll execution helpers higher up")
Fixes: b3fdea6ecb ("io_uring: multishot recv")
Fixes: 9bb66906f2 ("io_uring: support multishot in recvmsg")
Link: https://github.com/axboe/liburing/issues/1043
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 91e5d765a82fb2c9d0b7ad930d8953208081ddf1 upstream.
In preparation for putting some retry logic in there, have the done
path just skip straight to the end rather than have too much nesting
in here.
No functional changes in this patch.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 72bd80252feeb3bef8724230ee15d9f7ab541c6e upstream.
If we use IORING_OP_RECV with provided buffers and pass in '0' as the
length of the request, the length is retrieved from the selected buffer.
If MSG_WAITALL is also set and we get a short receive, then we may hit
the retry path which decrements sr->len and increments the buffer for
a retry. However, the length is still zero at this point, which means
that sr->len now becomes huge and import_ubuf() will cap it to
MAX_RW_COUNT and subsequently return -EFAULT for the range as a whole.
Fix this by always assigning sr->len once the buffer has been selected.
Cc: stable@vger.kernel.org
Fixes: 7ba89d2af1 ("io_uring: ensure recv and recvmsg handle MSG_WAITALL correctly")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f8f9ab2d98116e79d220f1d089df7464ad4e026d upstream.
io_uring does non-blocking connection attempts, which can yield some
unexpected results if a connect request is re-attempted by an an
application. This is equivalent to the following sync syscall sequence:
sock = socket(AF_INET, SOCK_STREAM | SOCK_NONBLOCK, IPPROTO_TCP);
connect(sock, &addr, sizeof(addr);
ret == -1 and errno == EINPROGRESS expected here. Now poll for POLLOUT
on sock, and when that returns, we expect the socket to be connected.
But if we follow that procedure with:
connect(sock, &addr, sizeof(addr));
you'd expect ret == -1 and errno == EISCONN here, but you actually get
ret == 0. If we attempt the connection one more time, then we get EISCON
as expected.
io_uring used to do this, but turns out that bluetooth fails with EBADFD
if you attempt to re-connect. Also looks like EISCONN _could_ occur with
this sequence.
Retain the ->in_progress logic, but work-around a potential EISCONN or
EBADFD error and only in those cases look at the sock_error(). This
should work in general and avoid the odd sequence of a repeated connect
request returning success when the socket is already connected.
This is all a side effect of the socket state being in a CONNECTING
state when we get EINPROGRESS, and only a re-connect or other related
operation will turn that into CONNECTED.
Cc: stable@vger.kernel.org
Fixes: 3fb1bd6881 ("io_uring/net: handle -EINPROGRESS correct for IORING_OP_CONNECT")
Link: https://github.com/axboe/liburing/issues/980
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now all callers of io_aux_cqe() set allow_overflow to false, remove the
parameter and not allow overflowing auxilary multishot cqes.
When CQ is full the function callers and all multishot requests in
general are expected to complete the request. That prevents indefinite
in-background grows of the overflow list and let's the userspace to
handle the backlog at its own pace.
Resubmitting a request should also be faster than accounting a bunch of
overflows, so it should be better for perf when it happens, but a well
behaving userspace should be trying to avoid overflows in any case.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/bb20d14d708ea174721e58bb53786b0521e4dd6d.1691757663.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=/j96
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.5-2023-07-03' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
"The fix for the msghdr->msg_inq assigned value being wrong, using -1
instead of -1U for the signed type.
Also a fix for ensuring when we're trying to run task_work on an
exiting task, that we wait for it. This is not really a correctness
thing as the work is being canceled, but it does help with ensuring
file descriptors are closed when the task has exited."
* tag 'io_uring-6.5-2023-07-03' of git://git.kernel.dk/linux:
io_uring: flush offloaded and delayed task_work on exit
io_uring: remove io_fallback_tw() forward declaration
io_uring/net: use proper value for msg_inq
Core
----
- Rework the sendpage & splice implementations. Instead of feeding
data into sockets page by page extend sendmsg handlers to support
taking a reference on the data, controlled by a new flag called
MSG_SPLICE_PAGES. Rework the handling of unexpected-end-of-file
to invoke an additional callback instead of trying to predict what
the right combination of MORE/NOTLAST flags is.
Remove the MSG_SENDPAGE_NOTLAST flag completely.
- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid.
- Enable socket busy polling with CONFIG_RT.
- Improve reliability and efficiency of reporting for ref_tracker.
- Auto-generate a user space C library for various Netlink families.
Protocols
---------
- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2].
- Use per-VMA locking for "page-flipping" TCP receive zerocopy.
- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags.
- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative.
- Create a new MPTCP getsockopt to retrieve all info (MPTCP_FULL_INFO).
- Avoid waking up applications using TLS sockets until we have
a full record.
- Allow using kernel memory for protocol ioctl callbacks, paving
the way to issuing ioctls over io_uring.
- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address.
- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch.
- PPPoE: make number of hash bits configurable.
- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig).
- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge).
- Support matching on Connectivity Fault Management (CFM) packets.
- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug.
- HSR: don't enable promiscuous mode if device offloads the proto.
- Support active scanning in IEEE 802.15.4.
- Continue work on Multi-Link Operation for WiFi 7.
BPF
---
- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used,
or in fact passing the verifier at all for complex programs,
especially those using open-coded iterators.
- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what
the output buffer *should* be, without writing anything.
- Accept dynptr memory as memory arguments passed to helpers.
- Add routing table ID to bpf_fib_lookup BPF helper.
- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands.
- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only).
- Show target_{obj,btf}_id in tracing link fdinfo.
- Addition of several new kfuncs (most of the names are self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs
Netfilter
---------
- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value.
- Increase ip_vs_conn_tab_bits range for 64BIT builds.
- Allow updating size of a set.
- Improve NAT tuple selection when connection is closing.
Driver API
----------
- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out).
- Support configuring rate selection pins of SFP modules.
- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines.
- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer.
- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio).
- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message.
- Split devlink instance and devlink port operations.
New hardware / drivers
----------------------
- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver
- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE
- CAN:
- Fintek F81604
Drivers
-------
- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10
- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)
- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is
a variant of
- CAN: Kvaser PCIEcan:
- support packet timestamping
- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split
the different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and
Enhanced MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=9i4I
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking changes from Jakub Kicinski:
"WiFi 7 and sendpage changes are the biggest pieces of work for this
release. The latter will definitely require fixes but I think that we
got it to a reasonable point.
Core:
- Rework the sendpage & splice implementations
Instead of feeding data into sockets page by page extend sendmsg
handlers to support taking a reference on the data, controlled by a
new flag called MSG_SPLICE_PAGES
Rework the handling of unexpected-end-of-file to invoke an
additional callback instead of trying to predict what the right
combination of MORE/NOTLAST flags is
Remove the MSG_SENDPAGE_NOTLAST flag completely
- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid
- Enable socket busy polling with CONFIG_RT
- Improve reliability and efficiency of reporting for ref_tracker
- Auto-generate a user space C library for various Netlink families
Protocols:
- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2]
- Use per-VMA locking for "page-flipping" TCP receive zerocopy
- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags
- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative
- Create a new MPTCP getsockopt to retrieve all info
(MPTCP_FULL_INFO)
- Avoid waking up applications using TLS sockets until we have a full
record
- Allow using kernel memory for protocol ioctl callbacks, paving the
way to issuing ioctls over io_uring
- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address
- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch
- PPPoE: make number of hash bits configurable
- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig)
- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge)
- Support matching on Connectivity Fault Management (CFM) packets
- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug
- HSR: don't enable promiscuous mode if device offloads the proto
- Support active scanning in IEEE 802.15.4
- Continue work on Multi-Link Operation for WiFi 7
BPF:
- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used, or
in fact passing the verifier at all for complex programs,
especially those using open-coded iterators
- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what the
output buffer *should* be, without writing anything
- Accept dynptr memory as memory arguments passed to helpers
- Add routing table ID to bpf_fib_lookup BPF helper
- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands
- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only)
- Show target_{obj,btf}_id in tracing link fdinfo
- Addition of several new kfuncs (most of the names are
self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs
Netfilter:
- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value
- Increase ip_vs_conn_tab_bits range for 64BIT builds
- Allow updating size of a set
- Improve NAT tuple selection when connection is closing
Driver API:
- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out)
- Support configuring rate selection pins of SFP modules
- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines
- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer
- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio)
- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message
- Split devlink instance and devlink port operations
New hardware / drivers:
- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver
- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE
- CAN:
- Fintek F81604
Drivers:
- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer
header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10
- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested
configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)
- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is a
variant of
- CAN: Kvaser PCIEcan:
- support packet timestamping
- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split the
different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and Enhanced
MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips"
* tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1602 commits)
net: scm: introduce and use scm_recv_unix helper
af_unix: Skip SCM_PIDFD if scm->pid is NULL.
net: lan743x: Simplify comparison
netlink: Add __sock_i_ino() for __netlink_diag_dump().
net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses
Revert "af_unix: Call scm_recv() only after scm_set_cred()."
phylink: ReST-ify the phylink_pcs_neg_mode() kdoc
libceph: Partially revert changes to support MSG_SPLICE_PAGES
net: phy: mscc: fix packet loss due to RGMII delays
net: mana: use vmalloc_array and vcalloc
net: enetc: use vmalloc_array and vcalloc
ionic: use vmalloc_array and vcalloc
pds_core: use vmalloc_array and vcalloc
gve: use vmalloc_array and vcalloc
octeon_ep: use vmalloc_array and vcalloc
net: usb: qmi_wwan: add u-blox 0x1312 composition
perf trace: fix MSG_SPLICE_PAGES build error
ipvlan: Fix return value of ipvlan_queue_xmit()
netfilter: nf_tables: fix underflow in chain reference counter
netfilter: nf_tables: unbind non-anonymous set if rule construction fails
...
struct msghdr->msg_inq is a signed type, yet we attempt to store what
is essentially an unsigned bitmask in there. We only really need to know
if the field was stored or not, but let's use the proper type to avoid
any misunderstandings on what is being attempted here.
Link: https://lore.kernel.org/io-uring/CAHk-=wjKb24aSe6fE4zDH-eh8hr-FB9BbukObUVSMGOrsBHCRQ@mail.gmail.com/
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=5Me8
-----END PGP SIGNATURE-----
Merge tag 'for-6.5/io_uring-2023-06-23' of git://git.kernel.dk/linux
Pull io_uring updates from Jens Axboe:
"Nothing major in this release, just a bunch of cleanups and some
optimizations around networking mostly.
- clean up file request flags handling (Christoph)
- clean up request freeing and CQ locking (Pavel)
- support for using pre-registering the io_uring fd at setup time
(Josh)
- Add support for user allocated ring memory, rather than having the
kernel allocate it. Mostly for packing rings into a huge page (me)
- avoid an unnecessary double retry on receive (me)
- maintain ordering for task_work, which also improves performance
(me)
- misc cleanups/fixes (Pavel, me)"
* tag 'for-6.5/io_uring-2023-06-23' of git://git.kernel.dk/linux: (39 commits)
io_uring: merge conditional unlock flush helpers
io_uring: make io_cq_unlock_post static
io_uring: inline __io_cq_unlock
io_uring: fix acquire/release annotations
io_uring: kill io_cq_unlock()
io_uring: remove IOU_F_TWQ_FORCE_NORMAL
io_uring: don't batch task put on reqs free
io_uring: move io_clean_op()
io_uring: inline io_dismantle_req()
io_uring: remove io_free_req_tw
io_uring: open code io_put_req_find_next
io_uring: add helpers to decode the fixed file file_ptr
io_uring: use io_file_from_index in io_msg_grab_file
io_uring: use io_file_from_index in __io_sync_cancel
io_uring: return REQ_F_ flags from io_file_get_flags
io_uring: remove io_req_ffs_set
io_uring: remove a confusing comment above io_file_get_flags
io_uring: remove the mode variable in io_file_get_flags
io_uring: remove __io_file_supports_nowait
io_uring: wait interruptibly for request completions on exit
...
Rather than assign the user pointer to msghdr->msg_control, assign it
to msghdr->msg_control_user to make sparse happy. They are in a union
so the end result is the same, but let's avoid new sparse warnings and
squash this one.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306210654.mDMcyMuB-lkp@intel.com/
Fixes: cac9e4418f ("io_uring/net: save msghdr->msg_control for retries")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We cannot sanely handle partial retries for recvmsg if we have cmsg
attached. If we don't, then we'd just be overwriting the initial cmsg
header on retries. Alternatively we could increment and handle this
appropriately, but it doesn't seem worth the complication.
Move the MSG_WAITALL check into the non-multishot case while at it,
since MSG_WAITALL is explicitly disabled for multishot anyway.
Link: https://lore.kernel.org/io-uring/0b0d4411-c8fd-4272-770b-e030af6919a0@kernel.dk/
Cc: stable@vger.kernel.org # 5.10+
Reported-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we have cmsg attached AND we transferred partial data at least, clear
msg_controllen on retry so we don't attempt to send that again.
Cc: stable@vger.kernel.org # 5.10+
Fixes: cac9e4418f ("io_uring/net: save msghdr->msg_control for retries")
Reported-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If the application sets ->msg_control and we have to later retry this
command, or if it got queued with IOSQE_ASYNC to begin with, then we
need to retain the original msg_control value. This is due to the net
stack overwriting this field with an in-kernel pointer, to copy it
in. Hitting that path for the second time will now fail the copy from
user, as it's attempting to copy from a non-user address.
Cc: stable@vger.kernel.org # 5.10+
Link: https://github.com/axboe/liburing/issues/880
Reported-and-tested-by: Marek Majkowski <marek@cloudflare.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Everybody is passing in the request, so get rid of the io_ring_ctx and
explicit user_data pass-in. Both the ctx and user_data can be deduced
from the request at hand.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Declare MSG_SPLICE_PAGES, an internal sendmsg() flag, that hints to a
network protocol that it should splice pages from the source iterator
rather than copying the data if it can. This flag is added to a list that
is cleared by sendmsg syscalls on entry.
This is intended as a replacement for the ->sendpage() op, allowing a way
to splice in several multipage folios in one go.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If we're doing multishot receives, then we always end up doing two trips
through sock_recvmsg(). For protocols that sanely set msghdr->msg_inq,
then we don't need to waste time picking a new buffer and attempting a
new receive if there's nothing there.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rather than have this logic in both io_recv() and io_recvmsg_multishot(),
push it into the handler they both call when finishing a receive
operation.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We can't currently tell if ->msg_inq was set when we ask for msg_get_inq,
initialize it to -1U so we can tell apart if it was set and there's
no data left, or if it just wasn't set at all by the protocol.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This returns a pointer to the current iovec entry in the iterator. Only
useful with ITER_IOVEC right now, but it prepares us to treat ITER_UBUF
and ITER_IOVEC identically for the first segment.
Rename struct iov_iter->iov to iov_iter->__iov to find any potentially
troublesome spots, and also to prevent anyone from adding new code that
accesses iter->iov directly.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since io_uring does nonblocking connect requests, if we do two repeated
ones without having a listener, the second will get -ECONNABORTED rather
than the expected -ECONNREFUSED. Treat -ECONNABORTED like a normal retry
condition if we're nonblocking, if we haven't already seen it.
Cc: stable@vger.kernel.org
Fixes: 3fb1bd6881 ("io_uring/net: handle -EINPROGRESS correct for IORING_OP_CONNECT")
Link: https://github.com/axboe/liburing/issues/828
Reported-by: Hui, Chunyang <sanqian.hcy@antgroup.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
MSG_NOSIGNAL is not applicable for the receiving side, SIGPIPE is
generated when trying to write to a "broken pipe". AF_PACKET's
packet_recvmsg() does enforce this, giving back EINVAL when MSG_NOSIGNAL
is set - making it unuseable in io_uring's recvmsg.
Remove MSG_NOSIGNAL from io_recvmsg_prep().
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: David Lamparter <equinox@diac24.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230224150123.128346-1-equinox@diac24.net
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=+ImB
-----END PGP SIGNATURE-----
Merge tag 'for-6.3/iter-ubuf-2023-02-16' of git://git.kernel.dk/linux
Pull io_uring ITER_UBUF conversion from Jens Axboe:
"Since we now have ITER_UBUF available, switch to using it for single
ranges as it's more efficient than ITER_IOVEC for that"
* tag 'for-6.3/iter-ubuf-2023-02-16' of git://git.kernel.dk/linux:
block: use iter_ubuf for single range
iov_iter: move iter_ubuf check inside restore WARN
io_uring: use iter_ubuf for single range imports
io_uring: switch network send/recv to ITER_UBUF
iov: add import_ubuf()
Some requests require being run async as they do not support
non-blocking. Instead of trying to issue these requests, getting -EAGAIN
and then queueing them for async issue, rather just force async upfront.
Add WARN_ON_ONCE to make sure surprising code paths do not come up,
however in those cases the bug would end up being a blocking
io_uring_enter(2) which should not be critical.
Signed-off-by: Dylan Yudaken <dylany@meta.com>
Link: https://lore.kernel.org/r/20230127135227.3646353-3-dylany@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we're using ring provided buffers with multishot receive, and we end
up doing an io-wq based issue at some points that also needs to select
a buffer, we'll lose the initially assigned buffer group as
io_ring_buffer_select() correctly clears the buffer group list as the
issue isn't serialized by the ctx uring_lock. This is fine for normal
receives as the request puts the buffer and finishes, but for multishot,
we will re-arm and do further receives. On the next trigger for this
multishot receive, the receive will try and pick from a buffer group
whose value is the same as the buffer ID of the las receive. That is
obviously incorrect, and will result in a premature -ENOUFS error for
the receive even if we had available buffers in the correct group.
Cache the buffer group value at prep time, so we can restore it for
future receives. This only needs doing for the above mentioned case, but
just do it by default to keep it easier to read.
Cc: stable@vger.kernel.org
Fixes: b3fdea6ecb ("io_uring: multishot recv")
Fixes: 9bb66906f2 ("io_uring: support multishot in recvmsg")
Cc: Dylan Yudaken <dylany@meta.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is more efficient than iter_iov.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[merged to 6.2]
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
If we're not allocating the vectors because the count is below
UIO_FASTIOV, we still do need to properly clear ->free_iov to prevent
an erronous free of on-stack data.
Reported-by: Jiri Slaby <jirislaby@gmail.com>
Fixes: 4c17a496a7 ("io_uring/net: fix cleanup double free free_iov init")
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=MzhS
-----END PGP SIGNATURE-----
Merge tag 'for-6.2/io_uring-next-2022-12-08' of git://git.kernel.dk/linux
Pull io_uring updates part two from Jens Axboe:
- Misc fixes (me, Lin)
- Series from Pavel extending the single task exclusive ring mode,
yielding nice improvements for the common case of having a single
ring per thread (Pavel)
- Cleanup for MSG_RING, removing our IOPOLL hack (Pavel)
- Further poll cleanups and fixes (Pavel)
- Misc cleanups and fixes (Pavel)
* tag 'for-6.2/io_uring-next-2022-12-08' of git://git.kernel.dk/linux: (22 commits)
io_uring/msg_ring: flag target ring as having task_work, if needed
io_uring: skip spinlocking for ->task_complete
io_uring: do msg_ring in target task via tw
io_uring: extract a io_msg_install_complete helper
io_uring: get rid of double locking
io_uring: never run tw and fallback in parallel
io_uring: use tw for putting rsrc
io_uring: force multishot CQEs into task context
io_uring: complete all requests in task context
io_uring: don't check overflow flush failures
io_uring: skip overflow CQE posting for dying ring
io_uring: improve io_double_lock_ctx fail handling
io_uring: dont remove file from msg_ring reqs
io_uring: reshuffle issue_flags
io_uring: don't reinstall quiesce node for each tw
io_uring: improve rsrc quiesce refs checks
io_uring: don't raw spin unlock to match cq_lock
io_uring: combine poll tw handlers
io_uring: improve poll warning handling
io_uring: remove ctx variable in io_poll_check_events
...
-----BEGIN PGP SIGNATURE-----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=EgDc
-----END PGP SIGNATURE-----
Merge tag 'for-6.2/io_uring-2022-12-08' of git://git.kernel.dk/linux
Pull io_uring updates from Jens Axboe:
- Always ensure proper ordering in case of CQ ring overflow, which then
means we can remove some work-arounds for that (Dylan)
- Support completion batching for multishot, greatly increasing the
efficiency for those (Dylan)
- Flag epoll/eventfd wakeups done from io_uring, so that we can easily
tell if we're recursing into io_uring again.
Previously, this would have resulted in repeated multishot
notifications if we had a dependency there. That could happen if an
eventfd was registered as the ring eventfd, and we multishot polled
for events on it. Or if an io_uring fd was added to epoll, and
io_uring had a multishot request for the epoll fd.
Test cases here:
https://git.kernel.dk/cgit/liburing/commit/?id=919755a7d0096fda08fb6d65ac54ad8d0fe027cd
Previously these got terminated when the CQ ring eventually
overflowed, now it's handled gracefully (me).
- Tightening of the IOPOLL based completions (Pavel)
- Optimizations of the networking zero-copy paths (Pavel)
- Various tweaks and fixes (Dylan, Pavel)
* tag 'for-6.2/io_uring-2022-12-08' of git://git.kernel.dk/linux: (41 commits)
io_uring: keep unlock_post inlined in hot path
io_uring: don't use complete_post in kbuf
io_uring: spelling fix
io_uring: remove io_req_complete_post_tw
io_uring: allow multishot polled reqs to defer completion
io_uring: remove overflow param from io_post_aux_cqe
io_uring: add lockdep assertion in io_fill_cqe_aux
io_uring: make io_fill_cqe_aux static
io_uring: add io_aux_cqe which allows deferred completion
io_uring: allow defer completion for aux posted cqes
io_uring: defer all io_req_complete_failed
io_uring: always lock in io_apoll_task_func
io_uring: remove iopoll spinlock
io_uring: iopoll protect complete_post
io_uring: inline __io_req_complete_put()
io_uring: remove io_req_tw_post_queue
io_uring: use io_req_task_complete() in timeout
io_uring: hold locks for io_req_complete_failed
io_uring: add completion locking for iopoll
io_uring: kill io_cqring_ev_posted() and __io_cq_unlock_post()
...
Multishot are posting CQEs outside of the normal request completion
path, which is usually done from within a task work handler. However, it
might be not the case when it's yet to be polled but has been punted to
io-wq. Make it abide ->task_complete and push it to the polling path
when executed by io-wq.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/d7714aaff583096769a0f26e8e747759e556feb1.1670384893.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
READ/WRITE proved to be actively confusing - the meanings are
"data destination, as used with read(2)" and "data source, as
used with write(2)", but people keep interpreting those as
"we read data from it" and "we write data to it", i.e. exactly
the wrong way.
Call them ITER_DEST and ITER_SOURCE - at least that is harder
to misinterpret...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Use the just introduced deferred post cqe completion state when possible
in io_aux_cqe. If not possible fallback to io_post_aux_cqe.
This introduces a complication because of allow_overflow. For deferred
completions we cannot know without locking the completion_lock if it will
overflow (and even if we locked it, another post could sneak in and cause
this cqe to be in overflow).
However since overflow protection is mostly a best effort defence in depth
to prevent infinite loops of CQEs for poll, just checking the overflow bit
is going to be good enough and will result in at most 16 (array size of
deferred cqes) overflows.
Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Dylan Yudaken <dylany@meta.com>
Link: https://lore.kernel.org/r/20221124093559.3780686-6-dylany@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With commit aa1df3a360 ("io_uring: fix CQE reordering"), there are
stronger guarantees for overflow ordering. Specifically ensuring that
userspace will not receive out of order receive CQEs. Therefore this is
not needed any more for recv/recvmsg.
Signed-off-by: Dylan Yudaken <dylany@meta.com>
Link: https://lore.kernel.org/r/20221107125236.260132-4-dylany@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is no longer needed after commit aa1df3a360 ("io_uring: fix CQE
reordering"), since all reordering is now taken care of.
This reverts commit cbd2574854 ("io_uring: fix multishot accept
ordering").
Signed-off-by: Dylan Yudaken <dylany@meta.com>
Link: https://lore.kernel.org/r/20221107125236.260132-2-dylany@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes two errors:
"ERROR: do not use assignment in if condition
130: FILE: io_uring/net.c:130:
+ if (!(issue_flags & IO_URING_F_UNLOCKED) &&
ERROR: do not use assignment in if condition
599: FILE: io_uring/poll.c:599:
+ } else if (!(issue_flags & IO_URING_F_UNLOCKED) &&"
reported by checkpatch.pl in net.c and poll.c .
Signed-off-by: Xinghui Li <korantli@tencent.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20221102082503.32236-1-korantwork@gmail.com
[axboe: style tweaks]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We can also move mm accounting to the extended callbacks. It removes a
few cycles from the hot path including skipping one function call and
setting io_req_task_complete as a callback directly. For user backed I/O
it shouldn't make any difference taking into considering atomic mm
accounting and page pinning.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/1062f270273ad11c1b7b45ec59a6a317533d5e64.1667557923.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pavel Begunkov