kmsg_dump_get_buffer() uses @syslog to determine if the syslog
prefix should be written to the buffer. However, when calculating
the maximum number of records that can fit into the buffer, it
always counts the bytes from the syslog prefix.
Use @syslog when calculating the maximum number of records that can
fit into the buffer.
Fixes: e2ae715d66 ("kmsg - kmsg_dump() use iterator to receive log buffer content")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210113164413.1599-1-john.ogness@linutronix.de
Counting text lines in a record simply involves counting the number
of newline characters (+1). However, it is searching the full data
block for newline characters, even though the text data can be (and
often is) a subset of that area. Since the extra area in the data
block was never initialized, the result is that extra newlines may
be seen and counted.
Restrict newline searching to the text data length.
Fixes: b6cf8b3f33 ("printk: add lockless ringbuffer")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210113144234.6545-1-john.ogness@linutronix.de
Adding support to carry build id data in mmap2 event.
The build id data replaces maj/min/ino/ino_generation
fields, which are also used to identify map's binary,
so it's ok to replace them with build id data:
union {
struct {
u32 maj;
u32 min;
u64 ino;
u64 ino_generation;
};
struct {
u8 build_id_size;
u8 __reserved_1;
u16 __reserved_2;
u8 build_id[20];
};
};
Replaced maj/min/ino/ino_generation fields give us size
of 24 bytes. We use 20 bytes for build id data, 1 byte
for size and rest is unused.
There's new misc bit for mmap2 to signal there's build
id data in it:
#define PERF_RECORD_MISC_MMAP_BUILD_ID (1 << 14)
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/bpf/20210114134044.1418404-4-jolsa@kernel.org
It's possible to have other build id types (other than default SHA1).
Currently there's also ld support for MD5 build id.
Adding size argument to build_id_parse function, that returns (if defined)
size of the parsed build id, so we can recognize the build id type.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210114134044.1418404-3-jolsa@kernel.org
Moving stack_map_get_build_id into lib with
declaration in linux/buildid.h header:
int build_id_parse(struct vm_area_struct *vma, unsigned char *build_id);
This function returns build id for given struct vm_area_struct.
There is no functional change to stack_map_get_build_id function.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210114134044.1418404-2-jolsa@kernel.org
This adds instructions for
atomic[64]_[fetch_]and
atomic[64]_[fetch_]or
atomic[64]_[fetch_]xor
All these operations are isomorphic enough to implement with the same
verifier, interpreter, and x86 JIT code, hence being a single commit.
The main interesting thing here is that x86 doesn't directly support
the fetch_ version these operations, so we need to generate a CMPXCHG
loop in the JIT. This requires the use of two temporary registers,
IIUC it's safe to use BPF_REG_AX and x86's AUX_REG for this purpose.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210114181751.768687-10-jackmanb@google.com
Since the atomic operations that are added in subsequent commits are
all isomorphic with BPF_ADD, pull out a macro to avoid the
interpreter becoming dominated by lines of atomic-related code.
Note that this sacrificies interpreter performance (combining
STX_ATOMIC_W and STX_ATOMIC_DW into single switch case means that we
need an extra conditional branch to differentiate them) in favour of
compact and (relatively!) simple C code.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210114181751.768687-9-jackmanb@google.com
This adds two atomic opcodes, both of which include the BPF_FETCH
flag. XCHG without the BPF_FETCH flag would naturally encode
atomic_set. This is not supported because it would be of limited
value to userspace (it doesn't imply any barriers). CMPXCHG without
BPF_FETCH woulud be an atomic compare-and-write. We don't have such
an operation in the kernel so it isn't provided to BPF either.
There are two significant design decisions made for the CMPXCHG
instruction:
- To solve the issue that this operation fundamentally has 3
operands, but we only have two register fields. Therefore the
operand we compare against (the kernel's API calls it 'old') is
hard-coded to be R0. x86 has similar design (and A64 doesn't
have this problem).
A potential alternative might be to encode the other operand's
register number in the immediate field.
- The kernel's atomic_cmpxchg returns the old value, while the C11
userspace APIs return a boolean indicating the comparison
result. Which should BPF do? A64 returns the old value. x86 returns
the old value in the hard-coded register (and also sets a
flag). That means return-old-value is easier to JIT, so that's
what we use.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210114181751.768687-8-jackmanb@google.com
The BPF_FETCH field can be set in bpf_insn.imm, for BPF_ATOMIC
instructions, in order to have the previous value of the
atomically-modified memory location loaded into the src register
after an atomic op is carried out.
Suggested-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210114181751.768687-7-jackmanb@google.com
I can't find a reason why this code is in resolve_pseudo_ldimm64;
since I'll be modifying it in a subsequent commit, tidy it up.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210114181751.768687-6-jackmanb@google.com
A subsequent patch will add additional atomic operations. These new
operations will use the same opcode field as the existing XADD, with
the immediate discriminating different operations.
In preparation, rename the instruction mode BPF_ATOMIC and start
calling the zero immediate BPF_ADD.
This is possible (doesn't break existing valid BPF progs) because the
immediate field is currently reserved MBZ and BPF_ADD is zero.
All uses are removed from the tree but the BPF_XADD definition is
kept around to avoid breaking builds for people including kernel
headers.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Björn Töpel <bjorn.topel@gmail.com>
Link: https://lore.kernel.org/bpf/20210114181751.768687-5-jackmanb@google.com
Add support for pointer to mem register spilling, to allow the verifier
to track pointers to valid memory addresses. Such pointers are returned
for example by a successful call of the bpf_ringbuf_reserve helper.
The patch was partially contributed by CyberArk Software, Inc.
Fixes: 457f44363a ("bpf: Implement BPF ring buffer and verifier support for it")
Suggested-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Gilad Reti <gilad.reti@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/bpf/20210113053810.13518-1-gilad.reti@gmail.com
One of the users can be built modular:
ERROR: modpost: "irq_check_status_bit" [drivers/perf/arm_spe_pmu.ko] undefined!
Fixes: fdd0296304 ("genirq: Move status flag checks to core")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201227192049.GA195845@roeck-us.net
Add support for directly accessing kernel module variables from BPF programs
using special ldimm64 instructions. This functionality builds upon vmlinux
ksym support, but extends ldimm64 with src_reg=BPF_PSEUDO_BTF_ID to allow
specifying kernel module BTF's FD in insn[1].imm field.
During BPF program load time, verifier will resolve FD to BTF object and will
take reference on BTF object itself and, for module BTFs, corresponding module
as well, to make sure it won't be unloaded from under running BPF program. The
mechanism used is similar to how bpf_prog keeps track of used bpf_maps.
One interesting change is also in how per-CPU variable is determined. The
logic is to find .data..percpu data section in provided BTF, but both vmlinux
and module each have their own .data..percpu entries in BTF. So for module's
case, the search for DATASEC record needs to look at only module's added BTF
types. This is implemented with custom search function.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/bpf/20210112075520.4103414-6-andrii@kernel.org
The error message here is misleading, the argument will be rejected unless
it is a known constant.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210112123913.2016804-1-jackmanb@google.com
Due to an integer overflow, RTC synchronization now happens every 2s
instead of the intended 11 minutes. Fix this by forcing 64-bit
arithmetic for the sync period calculation.
Annotate the other place which multiplies seconds for consistency as well.
Fixes: c9e6189fb0 ("ntp: Make the RTC synchronization more reliable")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210111103956.290378-1-geert+renesas@glider.be
Some modules don't declare any new types and end up with an empty BTF,
containing only valid BTF header and no types or strings sections. This
currently causes BTF validation error. There is nothing wrong with such BTF,
so fix the issue by allowing module BTFs with no types or strings.
Fixes: 36e68442d1 ("bpf: Load and verify kernel module BTFs")
Reported-by: Christopher William Snowhill <chris@kode54.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210110070341.1380086-1-andrii@kernel.org
When the compiler doesn't feel like inlining, it causes a noinstr
fail:
vmlinux.o: warning: objtool: lock_is_held_type()+0xb: call to lockdep_enabled() leaves .noinstr.text section
Fixes: 4d004099a6 ("lockdep: Fix lockdep recursion")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210106144017.592595176@infradead.org
optlen == 0 indicates that the kernel should ignore BPF buffer
and use the original one from the user. We, however, forget
to free the temporary buffer that we've allocated for BPF.
Fixes: d8fe449a9c ("bpf: Don't return EINVAL from {get,set}sockopt when optlen > PAGE_SIZE")
Reported-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210112162829.775079-1-sdf@google.com
The verifier allows ARG_PTR_TO_BTF_ID helper arguments to be NULL, so
helper implementations need to check this before dereferencing them.
This was already fixed for the socket storage helpers but not for task
and inode.
The issue can be reproduced by attaching an LSM program to
inode_rename hook (called when moving files) which tries to get the
inode of the new file without checking for its nullness and then trying
to move an existing file to a new path:
mv existing_file new_file_does_not_exist
The report including the sample program and the steps for reproducing
the bug:
https://lore.kernel.org/bpf/CANaYP3HWkH91SN=wTNO9FL_2ztHfqcXKX38SSE-JJ2voh+vssw@mail.gmail.com
Fixes: 4cf1bc1f10 ("bpf: Implement task local storage")
Fixes: 8ea636848a ("bpf: Implement bpf_local_storage for inodes")
Reported-by: Gilad Reti <gilad.reti@gmail.com>
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210112075525.256820-3-kpsingh@kernel.org
The bpf_tracing_prog_attach error path calls bpf_prog_put
on prog, which causes refcount underflow when it's called
from link_create function.
link_create
prog = bpf_prog_get <-- get
...
tracing_bpf_link_attach(prog..
bpf_tracing_prog_attach(prog..
out_put_prog:
bpf_prog_put(prog); <-- put
if (ret < 0)
bpf_prog_put(prog); <-- put
Removing bpf_prog_put call from bpf_tracing_prog_attach
and making sure its callers call it instead.
Fixes: 4a1e7c0c63 ("bpf: Support attaching freplace programs to multiple attach points")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210111191650.1241578-1-jolsa@kernel.org
The way to blacklist notrace functions for kprobes was not using
the proper kconfig which caused some archs (powerpc) from blacklisting
them.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCX/y/kRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qqUNAP9AAvvNt1xEA9XF1fsiYTEZuRZJYh70
kmraYV2r35EPVwD+ORLRFO5eIL8j4SQlome3MuC1iFLak9SKVT5pWOLcDQI=
=AtWi
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Blacklist properly on all archs.
The code to blacklist notrace functions for kprobes was not using the
right kconfig option, which caused some archs (powerpc) to possibly
not blacklist them"
* tag 'trace-v5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/kprobes: Do the notrace functions check without kprobes on ftrace
Enable the notrace function check on the architecture which doesn't
support kprobes on ftrace but support dynamic ftrace. This notrace
function check is not only for the kprobes on ftrace but also
sw-breakpoint based kprobes.
Thus there is no reason to limit this check for the arch which
supports kprobes on ftrace.
This also changes the dependency of Kconfig. Because kprobe event
uses the function tracer's address list for identifying notrace
function, if the CONFIG_DYNAMIC_FTRACE=n, it can not check whether
the target function is notrace or not.
Link: https://lkml.kernel.org/r/20210105065730.2634785-1-naveen.n.rao@linux.vnet.ibm.com
Link: https://lkml.kernel.org/r/161007957862.114704.4512260007555399463.stgit@devnote2
Cc: stable@vger.kernel.org
Fixes: 45408c4f92 ("tracing: kprobes: Prohibit probing on notrace function")
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
copy_siginfo_from_user_any() takes a userspace pointer as second
argument; annotate the parameter type accordingly.
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20201207000252.138564-1-jannh@google.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Here are some small staging driver fixes for 5.11-rc3. Nothing major,
just resolving some reported issues:
- cleanup some remaining mentions of the ION drivers that were
removed in 5.11-rc1
- comedi driver bugfix
- 2 error path memory leak fixes
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX/sJ2w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynrXACZASkdHO71XqECukP73ajgRD81LbQAn3igZysN
2gOnWLkJbYSoL1fDD3mx
=Jeh8
-----END PGP SIGNATURE-----
Merge tag 'staging-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some small staging driver fixes for 5.11-rc3. Nothing major,
just resolving some reported issues:
- cleanup some remaining mentions of the ION drivers that were
removed in 5.11-rc1
- comedi driver bugfix
- two error path memory leak fixes
All have been in linux-next for a while with no reported issues"
* tag 'staging-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: ION: remove some references to CONFIG_ION
staging: mt7621-dma: Fix a resource leak in an error handling path
Staging: comedi: Return -EFAULT if copy_to_user() fails
staging: spmi: hisi-spmi-controller: Fix some error handling paths
This program does not use argp (which is a glibcism). Instead include <errno.h>
directly, which was pulled in by <argp.h>.
Signed-off-by: Leah Neukirchen <leah@vuxu.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201216100306.30942-1-leah@vuxu.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Song reported a boot regression in a kvm image with 5.11-rc, and bisected
it down to the below patch. Debugging this issue, turns out that the boot
stalled when a task is waiting on a pipe being released. As we no longer
run task_work from get_signal() unless it's queued with TWA_SIGNAL, the
task goes idle without running the task_work. This prevents ->release()
from being called on the pipe, which another boot task is waiting on.
For now, re-instate the unconditional task_work run from get_signal().
For 5.12, we'll collapse TWA_RESUME and TWA_SIGNAL, as it no longer
makes sense to have a distinction between the two. This will turn
task_work notification into a simple boolean, whether to notify or not.
Fixes: 98b89b649f ("signal: kill JOBCTL_TASK_WORK")
Reported-by: Song Liu <songliubraving@fb.com>
Tested-by: John Stultz <john.stultz@linaro.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang version 11.0.1
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Alexei Starovoitov says:
====================
pull-request: bpf 2021-01-07
We've added 4 non-merge commits during the last 10 day(s) which contain
a total of 4 files changed, 14 insertions(+), 7 deletions(-).
The main changes are:
1) Fix task_iter bug caused by the merge conflict resolution, from Yonghong.
2) Fix resolve_btfids for multiple type hierarchies, from Jiri.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpftool: Fix compilation failure for net.o with older glibc
tools/resolve_btfids: Warn when having multiple IDs for single type
bpf: Fix a task_iter bug caused by a merge conflict resolution
selftests/bpf: Fix a compile error for BPF_F_BPRM_SECUREEXEC
====================
Link: https://lore.kernel.org/r/20210107221555.64959-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With commit e722a295cf ("staging: ion: remove from the tree"), ION and
its corresponding config CONFIG_ION is gone. Remove stale references
from drivers/staging/media/atomisp/pci and from the recommended Android
kernel config.
Fixes: e722a295cf ("staging: ion: remove from the tree")
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Rob Herring <robh@kernel.org>
Cc: linux-media@vger.kernel.org
Cc: devel@driverdev.osuosl.org
Signed-off-by: Matthias Maennich <maennich@google.com>
Link: https://lore.kernel.org/r/20210106155201.2845319-1-maennich@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
and bpf trees.
Current release - regressions:
- mt76: - usb: fix NULL pointer dereference in mt76u_status_worker
- sdio: fix NULL pointer dereference in mt76s_process_tx_queue
- net: ipa: fix interconnect enable bug
Current release - always broken:
- netfilter: ipset: fixes possible oops in mtype_resize
- ath11k: fix number of coding issues found by static analysis tools
and spurious error messages
Previous releases - regressions:
- e1000e: re-enable s0ix power saving flows for systems with
the Intel i219-LM Ethernet controllers to fix power
use regression
- virtio_net: fix recursive call to cpus_read_lock() to avoid
a deadlock
- ipv4: ignore ECN bits for fib lookups in fib_compute_spec_dst()
- net-sysfs: take the rtnl lock around XPS configuration
- xsk: - fix memory leak for failed bind
- rollback reservation at NETDEV_TX_BUSY
- r8169: work around power-saving bug on some chip versions
Previous releases - always broken:
- dcb: validate netlink message in DCB handler
- tun: fix return value when the number of iovs exceeds MAX_SKB_FRAGS
to prevent unnecessary retries
- vhost_net: fix ubuf refcount when sendmsg fails
- bpf: save correct stopping point in file seq iteration
- ncsi: use real net-device for response handler
- neighbor: fix div by zero caused by a data race (TOCTOU)
- bareudp: - fix use of incorrect min_headroom size
- fix false positive lockdep splat from the TX lock
- net: mvpp2: - clear force link UP during port init procedure
in case bootloader had set it
- add TCAM entry to drop flow control pause frames
- fix PPPoE with ipv6 packet parsing
- fix GoP Networking Complex Control config of port 3
- fix pkt coalescing IRQ-threshold configuration
- xsk: fix race in SKB mode transmit with shared cq
- ionic: account for vlan tag len in rx buffer len
- net: stmmac: ignore the second clock input, current clock framework
does not handle exclusive clock use well, other drivers
may reconfigure the second clock
Misc:
- ppp: change PPPIOCUNBRIDGECHAN ioctl request number to follow
existing scheme
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=N4/x
-----END PGP SIGNATURE-----
Merge tag 'net-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from netfilter, wireless and bpf
trees.
Current release - regressions:
- mt76: fix NULL pointer dereference in mt76u_status_worker and
mt76s_process_tx_queue
- net: ipa: fix interconnect enable bug
Current release - always broken:
- netfilter: fixes possible oops in mtype_resize in ipset
- ath11k: fix number of coding issues found by static analysis tools
and spurious error messages
Previous releases - regressions:
- e1000e: re-enable s0ix power saving flows for systems with the
Intel i219-LM Ethernet controllers to fix power use regression
- virtio_net: fix recursive call to cpus_read_lock() to avoid a
deadlock
- ipv4: ignore ECN bits for fib lookups in fib_compute_spec_dst()
- sysfs: take the rtnl lock around XPS configuration
- xsk: fix memory leak for failed bind and rollback reservation at
NETDEV_TX_BUSY
- r8169: work around power-saving bug on some chip versions
Previous releases - always broken:
- dcb: validate netlink message in DCB handler
- tun: fix return value when the number of iovs exceeds MAX_SKB_FRAGS
to prevent unnecessary retries
- vhost_net: fix ubuf refcount when sendmsg fails
- bpf: save correct stopping point in file seq iteration
- ncsi: use real net-device for response handler
- neighbor: fix div by zero caused by a data race (TOCTOU)
- bareudp: fix use of incorrect min_headroom size and a false
positive lockdep splat from the TX lock
- mvpp2:
- clear force link UP during port init procedure in case
bootloader had set it
- add TCAM entry to drop flow control pause frames
- fix PPPoE with ipv6 packet parsing
- fix GoP Networking Complex Control config of port 3
- fix pkt coalescing IRQ-threshold configuration
- xsk: fix race in SKB mode transmit with shared cq
- ionic: account for vlan tag len in rx buffer len
- stmmac: ignore the second clock input, current clock framework does
not handle exclusive clock use well, other drivers may reconfigure
the second clock
Misc:
- ppp: change PPPIOCUNBRIDGECHAN ioctl request number to follow
existing scheme"
* tag 'net-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits)
net: dsa: lantiq_gswip: Fix GSWIP_MII_CFG(p) register access
net: dsa: lantiq_gswip: Enable GSWIP_MII_CFG_EN also for internal PHYs
net: lapb: Decrease the refcount of "struct lapb_cb" in lapb_device_event
r8169: work around power-saving bug on some chip versions
net: usb: qmi_wwan: add Quectel EM160R-GL
selftests: mlxsw: Set headroom size of correct port
net: macb: Correct usage of MACB_CAPS_CLK_HW_CHG flag
ibmvnic: fix: NULL pointer dereference.
docs: networking: packet_mmap: fix old config reference
docs: networking: packet_mmap: fix formatting for C macros
vhost_net: fix ubuf refcount incorrectly when sendmsg fails
bareudp: Fix use of incorrect min_headroom size
bareudp: set NETIF_F_LLTX flag
net: hdlc_ppp: Fix issues when mod_timer is called while timer is running
atlantic: remove architecture depends
erspan: fix version 1 check in gre_parse_header()
net: hns: fix return value check in __lb_other_process()
net: sched: prevent invalid Scell_log shift count
net: neighbor: fix a crash caused by mod zero
ipv4: Ignore ECN bits for fib lookups in fib_compute_spec_dst()
...
Pull RCU fix from Paul McKenney:
"This is a fix for a regression in the v5.10 merge window, but it was
reported quite late in the v5.10 process, plus generating and testing
the fix took some time.
The regression is due to commit 36dadef23f ("kprobes: Init kprobes
in early_initcall") which on powerpc can use RCU Tasks before
initialization, resulting in boot failures.
The fix is straightforward, simply moving initialization of RCU Tasks
before the early_initcall()s. The fix has been exposed to -next and
kbuild test robot testing, and has been tested by the PowerPC guys"
* 'rcu/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
rcu-tasks: Move RCU-tasks initialization to before early_initcall()
Latest bpf tree has a bug for bpf_iter selftest:
$ ./test_progs -n 4/25
test_bpf_sk_storage_get:PASS:bpf_iter_bpf_sk_storage_helpers__open_and_load 0 nsec
test_bpf_sk_storage_get:PASS:socket 0 nsec
...
do_dummy_read:PASS:read 0 nsec
test_bpf_sk_storage_get:FAIL:bpf_map_lookup_elem map value wasn't set correctly
(expected 1792, got -1, err=0)
#4/25 bpf_sk_storage_get:FAIL
#4 bpf_iter:FAIL
Summary: 0/0 PASSED, 0 SKIPPED, 2 FAILED
When doing merge conflict resolution, Commit 4bfc471484 missed to
save curr_task to seq_file private data. The task pointer in seq_file
private data is passed to bpf program. This caused NULL-pointer task
passed to bpf program which will immediately return upon checking
whether task pointer is NULL.
This patch added back the assignment of curr_task to seq_file private
data and fixed the issue.
Fixes: 4bfc471484 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20201231052418.577024-1-yhs@fb.com
-----BEGIN PGP SIGNATURE-----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=XYT5
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.11-2021-01-01' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"A few fixes that should go into 5.11, all marked for stable as well:
- Fix issue around identity COW'ing and users that share a ring
across processes
- Fix a hang associated with unregistering fixed files (Pavel)
- Move the 'process is exiting' cancelation a bit earlier, so
task_works aren't affected by it (Pavel)"
* tag 'io_uring-5.11-2021-01-01' of git://git.kernel.dk/linux-block:
kernel/io_uring: cancel io_uring before task works
io_uring: fix io_sqe_files_unregister() hangs
io_uring: add a helper for setting a ref node
io_uring: don't assume mm is constant across submits
For cancelling io_uring requests it needs either to be able to run
currently enqueued task_works or having it shut down by that moment.
Otherwise io_uring_cancel_files() may be waiting for requests that won't
ever complete.
Go with the first way and do cancellations before setting PF_EXITING and
so before putting the task_work infrastructure into a transition state
where task_work_run() would better not be called.
Cc: stable@vger.kernel.org # 5.5+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Daniel Borkmann says:
====================
pull-request: bpf 2020-12-28
The following pull-request contains BPF updates for your *net* tree.
There is a small merge conflict between bpf tree commit 69ca310f34
("bpf: Save correct stopping point in file seq iteration") and net tree
commit 66ed594409 ("bpf/task_iter: In task_file_seq_get_next use
task_lookup_next_fd_rcu"). The get_files_struct() does not exist anymore
in net, so take the hunk in HEAD and add the `info->tid = curr_tid` to
the error path:
[...]
curr_task = task_seq_get_next(ns, &curr_tid, true);
if (!curr_task) {
info->task = NULL;
info->tid = curr_tid;
return NULL;
}
/* set info->task and info->tid */
[...]
We've added 10 non-merge commits during the last 9 day(s) which contain
a total of 11 files changed, 75 insertions(+), 20 deletions(-).
The main changes are:
1) Various AF_XDP fixes such as fill/completion ring leak on failed bind and
fixing a race in skb mode's backpressure mechanism, from Magnus Karlsson.
2) Fix latency spikes on lockdep enabled kernels by adding a rescheduling
point to BPF hashtab initialization, from Eric Dumazet.
3) Fix a splat in task iterator by saving the correct stopping point in the
seq file iteration, from Jonathan Lemon.
4) Fix BPF maps selftest by adding retries in case hashtab returns EBUSY
errors on update/deletes, from Andrii Nakryiko.
5) Fix BPF selftest error reporting to something more user friendly if the
vmlinux BTF cannot be found, from Kamal Mostafa.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull workqueue update from Tejun Heo:
"The same as the cgroup tree - one commit which was scheduled for the
5.11 merge window.
All the commit does is avoding spurious worker wakeups from workqueue
allocation / config change path to help cpuisol use cases"
* 'for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Kick a worker based on the actual activation of delayed works
Pull cgroup updates from Tejun Heo:
"These three patches were scheduled for the merge window but I forgot
to send them out. Sorry about that.
None of them are significant and they fit well in a fix pull request
too - two are cosmetic and one fixes a memory leak in the mount option
parsing path"
* 'for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Fix memory leak when parsing multiple source parameters
cgroup/cgroup.c: replace 'of->kn->priv' with of_cft()
kernel: cgroup: Mundane spelling fixes throughout the file
and fix a typo in the Kconfig help text.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=T0Y6
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
"Update/fix two CPU sanity checks in the hotplug and the boot code, and
fix a typo in the Kconfig help text.
[ Context: the first two commits are the result of an ongoing
annotation+review work of (intentional) tick_do_timer_cpu() data
races reported by KCSAN, but the annotations aren't fully cooked
yet ]"
* tag 'timers-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Fix spelling mistake in Kconfig "fullfill" -> "fulfill"
tick/sched: Remove bogus boot "safety" check
tick: Remove pointless cpu valid check in hotplug code
Commit 64a1b95bb9 ("genirq: Restrict export of irq_to_desc()") removed
the export of irq_to_desc() unless powerpc KVM is being built, because
there is still a use of irq_to_desc() in modular code there.
However it used:
#ifdef CONFIG_KVM_BOOK3S_64_HV
Which doesn't work when that symbol is =m, leading to a build failure:
ERROR: modpost: "irq_to_desc" [arch/powerpc/kvm/kvm-hv.ko] undefined!
Fix it by checking for the definedness of the correct symbol which is
CONFIG_KVM_BOOK3S_64_HV_MODULE.
Fixes: 64a1b95bb9 ("genirq: Restrict export of irq_to_desc()")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
accesses, inefficient and disfunctional code. The goal is to remove the
export of irq_to_desc() to prevent these things from creeping up again.
-----BEGIN PGP SIGNATURE-----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=BXv+
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2020-12-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"This is the second attempt after the first one failed miserably and
got zapped to unblock the rest of the interrupt related patches.
A treewide cleanup of interrupt descriptor (ab)use with all sorts of
racy accesses, inefficient and disfunctional code. The goal is to
remove the export of irq_to_desc() to prevent these things from
creeping up again"
* tag 'irq-core-2020-12-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
genirq: Restrict export of irq_to_desc()
xen/events: Implement irq distribution
xen/events: Reduce irq_info:: Spurious_cnt storage size
xen/events: Only force affinity mask for percpu interrupts
xen/events: Use immediate affinity setting
xen/events: Remove disfunct affinity spreading
xen/events: Remove unused bind_evtchn_to_irq_lateeoi()
net/mlx5: Use effective interrupt affinity
net/mlx5: Replace irq_to_desc() abuse
net/mlx4: Use effective interrupt affinity
net/mlx4: Replace irq_to_desc() abuse
PCI: mobiveil: Use irq_data_get_irq_chip_data()
PCI: xilinx-nwl: Use irq_data_get_irq_chip_data()
NTB/msi: Use irq_has_action()
mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc
pinctrl: nomadik: Use irq_has_action()
drm/i915/pmu: Replace open coded kstat_irqs() copy
drm/i915/lpe_audio: Remove pointless irq_to_desc() usage
s390/irq: Use irq_desc_kstat_cpu() in show_msi_interrupt()
parisc/irq: Use irq_desc_kstat_cpu() in show_interrupts()
...
Instead of directly comparing task->tgid and task->pid, use the
thread_group_leader() helper. This helps with readability, and
there should be no functional change.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201218185032.2464558-3-jonathan.lemon@gmail.com
- Rework the passive-mode "fast switch" path in the intel_pstate
driver to allow it receive the minimum (required) and target
(desired) performance information from the schedutil governor so
as to avoid running some workloads too fast (Rafael Wysocki).
- Make the intel_pstate driver allow the policy max limit to be
increased after the guaranteed performance value for the given
CPU has increased (Rafael Wysocki).
- Clean up the handling of CPU coordination types in the CPPC
cpufreq driver and make it export frequency domains information
to user space via sysfs (Ionela Voinescu).
- Fix the ACPI code handling processor objects to use a correct
coordination type when it fails to map frequency domains and drop
a redundant CPU map initialization from it (Ionela Voinescu, Punit
Agrawal).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl/iJwASHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxYw0P/30oAyf2ooGkGu16mhUWaa5chZ7iLB0i
tIhyv5uGX7n1UKNCY4ji5V//cIwv3eGOpw1KTzO4bTbi48Y0WdzblSOPNuZGuycD
GnDpPjtFrI5w19PMzn1tIEOX7pvl1GKg4QumGVCLt2xO6TGuaLAjXmfjO0+VG3Nz
XnhBQ3fS8SLm/8ox9BT7z1ODocPW5gRgQdtVUVvaXqDsGdy5FV0Jlg62JyqnJ2fR
rPwzIvyFAQELSdJGKPT+kUrhj1PKOH1P/3x5/E1EHGUhsOEwBvwWHHkHgTTEpKH5
MsUlYw3rOI6Y/ZoIgrlROFg5UwA4DP7f8k1Hca4jbyP4PKY1Pv/AsOSn8UJ2W4hd
v9h6clqLlu514Q9SLWjpX/WT2Uz5Nht/Y82NTOQeIZXjoAb2Jhb87C+mxO0GyaK2
X3Ipx2lL1Op3DkblERfubUoFlxay8Ld+EI0bG4uDccyI812sPR6mfQXsLQk29tjH
pSslQexjxF44109wHq8issXfvWD7CtzmOZoWk0WaStYhAU8K/b9wzFzBVQBfQdpS
cguS4DuLdl9etyRge9KFCxkq18F/gVRBAzmV6zyS6Cf4h+c0TyR5rp+7vWIjJyws
AGv8RbGdGeZG3T1hV6LJRU63h50PVbtAGqOuDcFaPlfZSD5g44QrkaS7+J0PNaPK
PKsB+zc9h2IW
=AcdB
-----END PGP SIGNATURE-----
Merge tag 'pm-5.11-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These update the CPPC cpufreq driver and intel_pstate (which involves
updating the cpufreq core and the schedutil governor) and make
janitorial changes in the ACPI code handling processor objects.
Specifics:
- Rework the passive-mode "fast switch" path in the intel_pstate
driver to allow it receive the minimum (required) and target
(desired) performance information from the schedutil governor so as
to avoid running some workloads too fast (Rafael Wysocki).
- Make the intel_pstate driver allow the policy max limit to be
increased after the guaranteed performance value for the given CPU
has increased (Rafael Wysocki).
- Clean up the handling of CPU coordination types in the CPPC cpufreq
driver and make it export frequency domains information to user
space via sysfs (Ionela Voinescu).
- Fix the ACPI code handling processor objects to use a correct
coordination type when it fails to map frequency domains and drop a
redundant CPU map initialization from it (Ionela Voinescu, Punit
Agrawal)"
* tag 'pm-5.11-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Use most recent guaranteed performance values
cpufreq: intel_pstate: Implement the ->adjust_perf() callback
cpufreq: Add special-purpose fast-switching callback for drivers
cpufreq: schedutil: Add util to struct sg_cpu
cppc_cpufreq: replace per-cpu data array with a list
cppc_cpufreq: expose information on frequency domains
cppc_cpufreq: clarify support for coordination types
cppc_cpufreq: use policy->cpu as driver of frequency setting
ACPI: processor: fix NONE coordination for domain mapping failure
Merge KASAN updates from Andrew Morton.
This adds a new hardware tag-based mode to KASAN. The new mode is
similar to the existing software tag-based KASAN, but relies on arm64
Memory Tagging Extension (MTE) to perform memory and pointer tagging
(instead of shadow memory and compiler instrumentation).
By Andrey Konovalov and Vincenzo Frascino.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (60 commits)
kasan: update documentation
kasan, mm: allow cache merging with no metadata
kasan: sanitize objects when metadata doesn't fit
kasan: clarify comment in __kasan_kfree_large
kasan: simplify assign_tag and set_tag calls
kasan: don't round_up too much
kasan, mm: rename kasan_poison_kfree
kasan, mm: check kasan_enabled in annotations
kasan: add and integrate kasan boot parameters
kasan: inline (un)poison_range and check_invalid_free
kasan: open-code kasan_unpoison_slab
kasan: inline random_tag for HW_TAGS
kasan: inline kasan_reset_tag for tag-based modes
kasan: remove __kasan_unpoison_stack
kasan: allow VMAP_STACK for HW_TAGS mode
kasan, arm64: unpoison stack only with CONFIG_KASAN_STACK
kasan: introduce set_alloc_info
kasan: rename get_alloc/free_info
kasan: simplify quarantine_put call site
kselftest/arm64: check GCR_EL1 after context switch
...
- support for a partial IOMMU bypass (Alexey Kardashevskiy)
- add a DMA API benchmark (Barry Song)
- misc fixes (Tiezhu Yang, tangjianqiang)
-----BEGIN PGP SIGNATURE-----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=dOug
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.11' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- support for a partial IOMMU bypass (Alexey Kardashevskiy)
- add a DMA API benchmark (Barry Song)
- misc fixes (Tiezhu Yang, tangjianqiang)
* tag 'dma-mapping-5.11' of git://git.infradead.org/users/hch/dma-mapping:
selftests/dma: add test application for DMA_MAP_BENCHMARK
dma-mapping: add benchmark support for streaming DMA APIs
dma-contiguous: fix a typo error in a comment
dma-pool: no need to check return value of debugfs_create functions
powerpc/dma: Fallback to dma_ops when persistent memory present
dma-mapping: Allow mixing bypass and mapped DMA operation
* pm-cpufreq:
cpufreq: intel_pstate: Use most recent guaranteed performance values
cpufreq: intel_pstate: Implement the ->adjust_perf() callback
cpufreq: Add special-purpose fast-switching callback for drivers
cpufreq: schedutil: Add util to struct sg_cpu
cppc_cpufreq: replace per-cpu data array with a list
cppc_cpufreq: expose information on frequency domains
cppc_cpufreq: clarify support for coordination types
cppc_cpufreq: use policy->cpu as driver of frequency setting
ACPI: processor: fix NONE coordination for domain mapping failure
ACPI: processor: Drop duplicate setting of shared_cpu_map
We noticed that with a LOCKDEP enabled kernel,
allocating a hash table with 65536 buckets would
use more than 60ms.
htab_init_buckets() runs from process context,
it is safe to schedule to avoid latency spikes.
Fixes: c50eb518e2 ("bpf: Use separate lockdep class for each hashtab")
Reported-by: John Sperbeck <jsperbeck@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201221192506.707584-1-eric.dumazet@gmail.com
* PSCI relay at EL2 when "protected KVM" is enabled
* New exception injection code
* Simplification of AArch32 system register handling
* Fix PMU accesses when no PMU is enabled
* Expose CSV3 on non-Meltdown hosts
* Cache hierarchy discovery fixes
* PV steal-time cleanups
* Allow function pointers at EL2
* Various host EL2 entry cleanups
* Simplification of the EL2 vector allocation
s390:
* memcg accouting for s390 specific parts of kvm and gmap
* selftest for diag318
* new kvm_stat for when async_pf falls back to sync
x86:
* Tracepoints for the new pagetable code from 5.10
* Catch VFIO and KVM irqfd events before userspace
* Reporting dirty pages to userspace with a ring buffer
* SEV-ES host support
* Nested VMX support for wait-for-SIPI activity state
* New feature flag (AVX512 FP16)
* New system ioctl to report Hyper-V-compatible paravirtualization features
Generic:
* Selftest improvements
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl/bdL4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNgQQgAnTH6rhXa++Zd5F0EM2NwXwz3iEGb
lOq1DZSGjs6Eekjn8AnrWbmVQr+CBCuGU9MrxpSSzNDK/awryo3NwepOWAZw9eqk
BBCVwGBbJQx5YrdgkGC0pDq2sNzcpW/VVB3vFsmOxd9eHblnuKSIxEsCCXTtyqIt
XrLpQ1UhvI4yu102fDNhuFw2EfpzXm+K0Lc0x6idSkdM/p7SyeOxiv8hD4aMr6+G
bGUQuMl4edKZFOWFigzr8NovQAvDHZGrwfihu2cLRYKLhV97QuWVmafv/yYfXcz2
drr+wQCDNzDOXyANnssmviazrhOX0QmTAhbIXGGX/kTxYKcfPi83ZLoI3A==
=ISud
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"Much x86 work was pushed out to 5.12, but ARM more than made up for it.
ARM:
- PSCI relay at EL2 when "protected KVM" is enabled
- New exception injection code
- Simplification of AArch32 system register handling
- Fix PMU accesses when no PMU is enabled
- Expose CSV3 on non-Meltdown hosts
- Cache hierarchy discovery fixes
- PV steal-time cleanups
- Allow function pointers at EL2
- Various host EL2 entry cleanups
- Simplification of the EL2 vector allocation
s390:
- memcg accouting for s390 specific parts of kvm and gmap
- selftest for diag318
- new kvm_stat for when async_pf falls back to sync
x86:
- Tracepoints for the new pagetable code from 5.10
- Catch VFIO and KVM irqfd events before userspace
- Reporting dirty pages to userspace with a ring buffer
- SEV-ES host support
- Nested VMX support for wait-for-SIPI activity state
- New feature flag (AVX512 FP16)
- New system ioctl to report Hyper-V-compatible paravirtualization features
Generic:
- Selftest improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (171 commits)
KVM: SVM: fix 32-bit compilation
KVM: SVM: Add AP_JUMP_TABLE support in prep for AP booting
KVM: SVM: Provide support to launch and run an SEV-ES guest
KVM: SVM: Provide an updated VMRUN invocation for SEV-ES guests
KVM: SVM: Provide support for SEV-ES vCPU loading
KVM: SVM: Provide support for SEV-ES vCPU creation/loading
KVM: SVM: Update ASID allocation to support SEV-ES guests
KVM: SVM: Set the encryption mask for the SVM host save area
KVM: SVM: Add NMI support for an SEV-ES guest
KVM: SVM: Guest FPU state save/restore not needed for SEV-ES guest
KVM: SVM: Do not report support for SMM for an SEV-ES guest
KVM: x86: Update __get_sregs() / __set_sregs() to support SEV-ES
KVM: SVM: Add support for CR8 write traps for an SEV-ES guest
KVM: SVM: Add support for CR4 write traps for an SEV-ES guest
KVM: SVM: Add support for CR0 write traps for an SEV-ES guest
KVM: SVM: Add support for EFER write traps for an SEV-ES guest
KVM: SVM: Support string IO operations for an SEV-ES guest
KVM: SVM: Support MMIO for an SEV-ES guest
KVM: SVM: Create trace events for VMGEXIT MSR protocol processing
KVM: SVM: Create trace events for VMGEXIT processing
...
Split off from prev patch in the series that implements the syscall.
Link: https://lkml.kernel.org/r/20201121144401.3727659-4-willemdebruijn.kernel@gmail.com
Signed-off-by: Willem de Bruijn <willemb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is a spelling mistake in the Kconfig help text. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201217171705.57586-1-colin.king@canonical.com
Since commit 5fe71d271d ("irqchip/gic-v3-its: Tag ITS device as shared if
allocating for a proxy device"), some of the devices are wrongly marked as
"shared" by the ITS driver on systems equipped with the ITS(es). The
problem is that the @info->flags may not be initialized anywhere and we end
up looking at random bits on the stack. That's obviously not good.
We can perform the initialization in the IRQ core layer before calling
msi_domain_prepare_irqs(), which is neat enough.
Fixes: 5fe71d271d ("irqchip/gic-v3-its: Tag ITS device as shared if allocating for a proxy device")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201218060039.1770-1-yuzenghui@huawei.com
Similar to commit:
1a63dcd876 ("softirq: Reorder trace_softirqs_on to prevent lockdep splat")
__local_bh_enable_ip() can also call into tracing with inconsistent
state. Unlike that commit we don't need to bother about the tracepoint
because 'cnt-1' never matches preempt_count() (by construction).
Reported-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lkml.kernel.org/r/20201218154519.GW3092@hirez.programming.kicks-ass.net
When the static_key is part of the module, and the module calls
static_key_inc/enable() from it's __init section *AND* has a
static_branch_*() user in that very same __init section, things go
wobbly.
If the static_key lives outside the module, jump_label_add_module()
would append this module's sites to the key and jump_label_update()
would take the static_key_linked() branch and all would be fine.
If all the sites are outside of __init, then everything will be fine
too.
However, when all is aligned just as described above,
jump_label_update() calls __jump_label_update(.init = false) and we'll
not update sites in __init text.
Fixes: 1948367768 ("jump_label: Annotate entries that operate on __init code earlier")
Reported-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Jessica Yu <jeyu@kernel.org>
Link: https://lkml.kernel.org/r/20201216135435.GV3092@hirez.programming.kicks-ass.net
The major update to this release is that there's a new arch config option called:
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS. Currently, only x86_64 enables it.
All the ftrace callbacks now take a struct ftrace_regs instead of a struct
pt_regs. If the architecture has HAVE_DYNAMIC_FTRACE_WITH_ARGS enabled, then
the ftrace_regs will have enough information to read the arguments of the
function being traced, as well as access to the stack pointer. This way, if
a user (like live kernel patching) only cares about the arguments, then it
can avoid using the heavier weight "regs" callback, that puts in enough
information in the struct ftrace_regs to simulate a breakpoint exception
(needed for kprobes).
New config option that audits the timestamps of the ftrace ring buffer at
most every event recorded. The "check_buffer()" calls will conflict with
mainline, because I purposely added the check without including the fix that
it caught, which is in mainline. Running a kernel built from the commit of
the added check will trigger it.
Ftrace recursion protection has been cleaned up to move the protection to
the callback itself (this saves on an extra function call for those
callbacks).
Perf now handles its own RCU protection and does not depend on ftrace to do
it for it (saving on that extra function call).
New debug option to add "recursed_functions" file to tracefs that lists all
the places that triggered the recursion protection of the function tracer.
This will show where things need to be fixed as recursion slows down the
function tracer.
The eval enum mapping updates done at boot up are now offloaded to a work
queue, as it caused a noticeable pause on slow embedded boards.
Various clean ups and last minute fixes.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCX9uq8xQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qtrwAQCHevqWMjKc1Q76bnCgwB0AbFKB6vqy
5b6g/co5+ihv8wD/eJPWlZMAt97zTVW7bdp5qj/GTiCDbAsODMZ597LsxA0=
=rZEz
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"The major update to this release is that there's a new arch config
option called CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS.
Currently, only x86_64 enables it. All the ftrace callbacks now take a
struct ftrace_regs instead of a struct pt_regs. If the architecture
has HAVE_DYNAMIC_FTRACE_WITH_ARGS enabled, then the ftrace_regs will
have enough information to read the arguments of the function being
traced, as well as access to the stack pointer.
This way, if a user (like live kernel patching) only cares about the
arguments, then it can avoid using the heavier weight "regs" callback,
that puts in enough information in the struct ftrace_regs to simulate
a breakpoint exception (needed for kprobes).
A new config option that audits the timestamps of the ftrace ring
buffer at most every event recorded.
Ftrace recursion protection has been cleaned up to move the protection
to the callback itself (this saves on an extra function call for those
callbacks).
Perf now handles its own RCU protection and does not depend on ftrace
to do it for it (saving on that extra function call).
New debug option to add "recursed_functions" file to tracefs that
lists all the places that triggered the recursion protection of the
function tracer. This will show where things need to be fixed as
recursion slows down the function tracer.
The eval enum mapping updates done at boot up are now offloaded to a
work queue, as it caused a noticeable pause on slow embedded boards.
Various clean ups and last minute fixes"
* tag 'trace-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (33 commits)
tracing: Offload eval map updates to a work queue
Revert: "ring-buffer: Remove HAVE_64BIT_ALIGNED_ACCESS"
ring-buffer: Add rb_check_bpage in __rb_allocate_pages
ring-buffer: Fix two typos in comments
tracing: Drop unneeded assignment in ring_buffer_resize()
tracing: Disable ftrace selftests when any tracer is running
seq_buf: Avoid type mismatch for seq_buf_init
ring-buffer: Fix a typo in function description
ring-buffer: Remove obsolete rb_event_is_commit()
ring-buffer: Add test to validate the time stamp deltas
ftrace/documentation: Fix RST C code blocks
tracing: Clean up after filter logic rewriting
tracing: Remove the useless value assignment in test_create_synth_event()
livepatch: Use the default ftrace_ops instead of REGS when ARGS is available
ftrace/x86: Allow for arguments to be passed in to ftrace_regs by default
ftrace: Have the callbacks receive a struct ftrace_regs instead of pt_regs
MAINTAINERS: assign ./fs/tracefs to TRACING
tracing: Fix some typos in comments
ftrace: Remove unused varible 'ret'
ring-buffer: Add recording of ring buffer recursion into recursed_functions
...
Summary of modules changes for the 5.11 merge window:
- Fix a race condition between systemd/udev and the module loader.
The module loader was sending a uevent before the module was fully
initialized (i.e., before its init function has been called). This means
udev can start processing the module uevent before the module has
finished initializing, and some udev rules expect that the module has
initialized already upon receiving the uevent. This resulted in some
systemd mount units failing if udev processes the event faster than the
module can finish init. This is fixed by delaying the uevent until after
the module has called its init routine.
- Make the linker array sections for kernel params and module version
attributes more robust by switching to use the alignment of the type in
question. Namely, linker section arrays will be constructed using the
alignment required by the struct (using __alignof__()) as opposed to a
specific value such as sizeof(void *) or sizeof(long). This is less
likely to cause breakages should the size of the type ever change (from
Johan Hovold)
- Fix module state inconsistency by setting it back to GOING when a module
fails to load and is on its way out (from Miroslav Benes)
- Some comment and code cleanups (from Sergey Shtylyov)
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=FAwZ
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull modules updates from Jessica Yu:
"Summary of modules changes for the 5.11 merge window:
- Fix a race condition between systemd/udev and the module loader.
The module loader was sending a uevent before the module was fully
initialized (i.e., before its init function has been called). This
means udev can start processing the module uevent before the module
has finished initializing, and some udev rules expect that the
module has initialized already upon receiving the uevent.
This resulted in some systemd mount units failing if udev processes
the event faster than the module can finish init. This is fixed by
delaying the uevent until after the module has called its init
routine.
- Make the linker array sections for kernel params and module version
attributes more robust by switching to use the alignment of the
type in question.
Namely, linker section arrays will be constructed using the
alignment required by the struct (using __alignof__()) as opposed
to a specific value such as sizeof(void *) or sizeof(long). This is
less likely to cause breakages should the size of the type ever
change (Johan Hovold)
- Fix module state inconsistency by setting it back to GOING when a
module fails to load and is on its way out (Miroslav Benes)
- Some comment and code cleanups (Sergey Shtylyov)"
* tag 'modules-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: delay kobject uevent until after module init call
module: drop semicolon from version macro
init: use type alignment for kernel parameters
params: clean up module-param macros
params: use type alignment for kernel parameters
params: drop redundant "unused" attributes
module: simplify version-attribute handling
module: drop version-attribute alignment
module: fix comment style
module: add more 'kernel-doc' comments
module: fix up 'kernel-doc' comments
module: only handle errors with the *switch* statement in module_sig_check()
module: avoid *goto*s in module_sig_check()
module: merge repetitive strings in module_sig_check()
module: set MODULE_STATE_GOING state when a module fails to load
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAl/bPRMACgkQnJ2qBz9k
QNmktwf7BE+H0PEgm3VfEs8uKUnmgr/TTBd9rhuKVa8NeYrT1YlX2ocCykawaLSW
ppyXkr2rWKwvRO5P9hZPUsMbjvp7ucz14imBHlhiQpPyfh8cqMazPJLySqbAI/M+
Eo8WIl74EqQ4VIgCGgfIVD073yjA4FWvO+5/CITYR44Pc2WzyCdU/1oKGBrs4+Cg
OZAsHvg+2uKiEVeaBwbII+X/jChCJwEfHEYry3A8oRL427HrDir7Jc9i3SNGTDnc
SE6DPj9X5HWOfoXjVrMratnaz654isvdRdP6GRAFKX8rJlNPGLMZbQ3DTzLGTYKL
7r9KylGD5nCkL1SXjUOLCqHgVRrgpg==
=xcC/
-----END PGP SIGNATURE-----
Merge tag 'fsnotify_for_v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify updates from Jan Kara:
"A few fsnotify fixes from Amir fixing fallout from big fsnotify
overhaul a few months back and an improvement of defaults limiting
maximum number of inotify watches from Waiman"
* tag 'fsnotify_for_v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fsnotify: fix events reported to watching parent and child
inotify: convert to handle_inode_event() interface
fsnotify: generalize handle_inode_event()
inotify: Increase default inotify.max_user_watches limit to 1048576
There are a couple of subsystems maintained by other people that
merge their drivers through the SoC tree, those changes include:
- The SCMI firmware framework gains support for sensor notifications
and for controlling voltage domains.
- A large update for the Tegra memory controller driver, integrating
it better with the interconnect framework
- The memory controller subsystem gains support for Mediatek MT8192
- The reset controller framework gains support for sharing pulsed
resets
For Soc specific drivers in drivers/soc, the main changes are
- The Allwinner/sunxi MBUS gets a rework for the way it handles
dma_map_ops and offsets between physical and dma address spaces.
- An errata fix plus some cleanups for Freescale Layerscape SoCs
- A cleanup for renesas drivers regarding MMIO accesses.
- New SoC specific drivers for Mediatek MT8192 and MT8183 power domains
- New SoC specific drivers for Aspeed AST2600 LPC bus control
and SoC identification.
- Core Power Domain support for Qualcomm MSM8916, MSM8939, SDM660
and SDX55.
- A rework of the TI AM33xx 'genpd' power domain support to use
information from DT instead of platform data
- Support for TI AM64x SoCs
- Allow building some Amlogic drivers as modules instead of built-in
Finally, there are numerous cleanups and smaller bug fixes for
Mediatek, Tegra, Samsung, Qualcomm, TI OMAP, Amlogic, Rockchips,
Renesas, and Xilinx SoCs.
There is a trivial conflict in the cedrus driver, with two branches
adding the same CEDRUS_CAPABILITY_H265_DEC flag, and another trivial
remove/remove conflict in linux/dma-mapping.h.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=BjJf
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"There are a couple of subsystems maintained by other people that merge
their drivers through the SoC tree, those changes include:
- The SCMI firmware framework gains support for sensor notifications
and for controlling voltage domains.
- A large update for the Tegra memory controller driver, integrating
it better with the interconnect framework
- The memory controller subsystem gains support for Mediatek MT8192
- The reset controller framework gains support for sharing pulsed
resets
For Soc specific drivers in drivers/soc, the main changes are
- The Allwinner/sunxi MBUS gets a rework for the way it handles
dma_map_ops and offsets between physical and dma address spaces.
- An errata fix plus some cleanups for Freescale Layerscape SoCs
- A cleanup for renesas drivers regarding MMIO accesses.
- New SoC specific drivers for Mediatek MT8192 and MT8183 power
domains
- New SoC specific drivers for Aspeed AST2600 LPC bus control and SoC
identification.
- Core Power Domain support for Qualcomm MSM8916, MSM8939, SDM660 and
SDX55.
- A rework of the TI AM33xx 'genpd' power domain support to use
information from DT instead of platform data
- Support for TI AM64x SoCs
- Allow building some Amlogic drivers as modules instead of built-in
Finally, there are numerous cleanups and smaller bug fixes for
Mediatek, Tegra, Samsung, Qualcomm, TI OMAP, Amlogic, Rockchips,
Renesas, and Xilinx SoCs"
* tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (222 commits)
soc: mediatek: mmsys: Specify HAS_IOMEM dependency for MTK_MMSYS
firmware: xilinx: Properly align function parameter
firmware: xilinx: Add a blank line after function declaration
firmware: xilinx: Remove additional newline
firmware: xilinx: Fix kernel-doc warnings
firmware: xlnx-zynqmp: fix compilation warning
soc: xilinx: vcu: add missing register NUM_CORE
soc: xilinx: vcu: use vcu-settings syscon registers
dt-bindings: soc: xlnx: extract xlnx, vcu-settings to separate binding
soc: xilinx: vcu: drop useless success message
clk: samsung: mark PM functions as __maybe_unused
soc: samsung: exynos-chipid: initialize later - with arch_initcall
soc: samsung: exynos-chipid: order list of SoCs by name
memory: jz4780_nemc: Fix potential NULL dereference in jz4780_nemc_probe()
memory: ti-emif-sram: only build for ARMv7
memory: tegra30: Support interconnect framework
memory: tegra20: Support hardware versioning and clean up OPP table initialization
dt-bindings: memory: tegra20-emc: Document opp-supported-hw property
soc: rockchip: io-domain: Fix error return code in rockchip_iodomain_probe()
reset-controller: ti: force the write operation when assert or deassert
...
Pull swiotlb update from Konrad Rzeszutek Wilk:
"A generic (but for right now engaged only with AMD SEV) mechanism to
adjust a larger size SWIOTLB based on the total memory of the SEV
guests which right now require the bounce buffer for interacting with
the outside world.
Normal knobs (swiotlb=XYZ) still work"
* 'stable/for-linus-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
x86,swiotlb: Adjust SWIOTLB bounce buffer size for SEV guests
A smaller set of patches, nothing stands out as being particularly major
this cycle:
- Driver bug fixes and updates: bnxt_re, cxgb4, rxe, hns, i40iw, cxgb4,
mlx4 and mlx5
- Bug fixes and polishing for the new rts ULP
- Cleanup of uverbs checking for allowed driver operations
- Use sysfs_emit all over the place
- Lots of bug fixes and clarity improvements for hns
- hip09 support for hns
- NDR and 50/100Gb signaling rates
- Remove dma_virt_ops and go back to using the IB DMA wrappers
- mlx5 optimizations for contiguous DMA regions
-----BEGIN PGP SIGNATURE-----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=9t8b
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"A smaller set of patches, nothing stands out as being particularly
major this cycle. The biggest item would be the new HIP09 HW support
from HNS, otherwise it was pretty quiet for new work here:
- Driver bug fixes and updates: bnxt_re, cxgb4, rxe, hns, i40iw,
cxgb4, mlx4 and mlx5
- Bug fixes and polishing for the new rts ULP
- Cleanup of uverbs checking for allowed driver operations
- Use sysfs_emit all over the place
- Lots of bug fixes and clarity improvements for hns
- hip09 support for hns
- NDR and 50/100Gb signaling rates
- Remove dma_virt_ops and go back to using the IB DMA wrappers
- mlx5 optimizations for contiguous DMA regions"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (147 commits)
RDMA/cma: Don't overwrite sgid_attr after device is released
RDMA/mlx5: Fix MR cache memory leak
RDMA/rxe: Use acquire/release for memory ordering
RDMA/hns: Simplify AEQE process for different types of queue
RDMA/hns: Fix inaccurate prints
RDMA/hns: Fix incorrect symbol types
RDMA/hns: Clear redundant variable initialization
RDMA/hns: Fix coding style issues
RDMA/hns: Remove unnecessary access right set during INIT2INIT
RDMA/hns: WARN_ON if get a reserved sl from users
RDMA/hns: Avoid filling sl in high 3 bits of vlan_id
RDMA/hns: Do shift on traffic class when using RoCEv2
RDMA/hns: Normalization the judgment of some features
RDMA/hns: Limit the length of data copied between kernel and userspace
RDMA/mlx4: Remove bogus dev_base_lock usage
RDMA/uverbs: Fix incorrect variable type
RDMA/core: Do not indicate device ready when device enablement fails
RDMA/core: Clean up cq pool mechanism
RDMA/core: Update kernel documentation for ib_create_named_qp()
MAINTAINERS: SOFT-ROCE: Change Zhu Yanjun's email address
...
-----BEGIN PGP SIGNATURE-----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=zo4w
-----END PGP SIGNATURE-----
Merge tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
"Another series of killing more code than what is being added, again
thanks to Christoph's relentless cleanups and tech debt tackling.
This contains:
- blk-iocost improvements (Baolin Wang)
- part0 iostat fix (Jeffle Xu)
- Disable iopoll for split bios (Jeffle Xu)
- block tracepoint cleanups (Christoph Hellwig)
- Merging of struct block_device and hd_struct (Christoph Hellwig)
- Rework/cleanup of how block device sizes are updated (Christoph
Hellwig)
- Simplification of gendisk lookup and removal of block device
aliasing (Christoph Hellwig)
- Block device ioctl cleanups (Christoph Hellwig)
- Removal of bdget()/blkdev_get() as exported API (Christoph Hellwig)
- Disk change rework, avoid ->revalidate_disk() (Christoph Hellwig)
- sbitmap improvements (Pavel Begunkov)
- Hybrid polling fix (Pavel Begunkov)
- bvec iteration improvements (Pavel Begunkov)
- Zone revalidation fixes (Damien Le Moal)
- blk-throttle limit fix (Yu Kuai)
- Various little fixes"
* tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-block: (126 commits)
blk-mq: fix msec comment from micro to milli seconds
blk-mq: update arg in comment of blk_mq_map_queue
blk-mq: add helper allocating tagset->tags
Revert "block: Fix a lockdep complaint triggered by request queue flushing"
nvme-loop: use blk_mq_hctx_set_fq_lock_class to set loop's lock class
blk-mq: add new API of blk_mq_hctx_set_fq_lock_class
block: disable iopoll for split bio
block: Improve blk_revalidate_disk_zones() checks
sbitmap: simplify wrap check
sbitmap: replace CAS with atomic and
sbitmap: remove swap_lock
sbitmap: optimise sbitmap_deferred_clear()
blk-mq: skip hybrid polling if iopoll doesn't spin
blk-iocost: Factor out the base vrate change into a separate function
blk-iocost: Factor out the active iocgs' state check into a separate function
blk-iocost: Move the usage ratio calculation to the correct place
blk-iocost: Remove unnecessary advance declaration
blk-iocost: Fix some typos in comments
blktrace: fix up a kerneldoc comment
block: remove the request_queue to argument request based tracepoints
...
-----BEGIN PGP SIGNATURE-----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=cadT
-----END PGP SIGNATURE-----
Merge tag 'tif-task_work.arch-2020-12-14' of git://git.kernel.dk/linux-block
Pull TIF_NOTIFY_SIGNAL updates from Jens Axboe:
"This sits on top of of the core entry/exit and x86 entry branch from
the tip tree, which contains the generic and x86 parts of this work.
Here we convert the rest of the archs to support TIF_NOTIFY_SIGNAL.
With that done, we can get rid of JOBCTL_TASK_WORK from task_work and
signal.c, and also remove a deadlock work-around in io_uring around
knowing that signal based task_work waking is invoked with the sighand
wait queue head lock.
The motivation for this work is to decouple signal notify based
task_work, of which io_uring is a heavy user of, from sighand. The
sighand lock becomes a huge contention point, particularly for
threaded workloads where it's shared between threads. Even outside of
threaded applications it's slower than it needs to be.
Roman Gershman <romger@amazon.com> reported that his networked
workload dropped from 1.6M QPS at 80% CPU to 1.0M QPS at 100% CPU
after io_uring was changed to use TIF_NOTIFY_SIGNAL. The time was all
spent hammering on the sighand lock, showing 57% of the CPU time there
[1].
There are further cleanups possible on top of this. One example is
TIF_PATCH_PENDING, where a patch already exists to use
TIF_NOTIFY_SIGNAL instead. Hopefully this will also lead to more
consolidation, but the work stands on its own as well"
[1] https://github.com/axboe/liburing/issues/215
* tag 'tif-task_work.arch-2020-12-14' of git://git.kernel.dk/linux-block: (28 commits)
io_uring: remove 'twa_signal_ok' deadlock work-around
kernel: remove checking for TIF_NOTIFY_SIGNAL
signal: kill JOBCTL_TASK_WORK
io_uring: JOBCTL_TASK_WORK is no longer used by task_work
task_work: remove legacy TWA_SIGNAL path
sparc: add support for TIF_NOTIFY_SIGNAL
riscv: add support for TIF_NOTIFY_SIGNAL
nds32: add support for TIF_NOTIFY_SIGNAL
ia64: add support for TIF_NOTIFY_SIGNAL
h8300: add support for TIF_NOTIFY_SIGNAL
c6x: add support for TIF_NOTIFY_SIGNAL
alpha: add support for TIF_NOTIFY_SIGNAL
xtensa: add support for TIF_NOTIFY_SIGNAL
arm: add support for TIF_NOTIFY_SIGNAL
microblaze: add support for TIF_NOTIFY_SIGNAL
hexagon: add support for TIF_NOTIFY_SIGNAL
csky: add support for TIF_NOTIFY_SIGNAL
openrisc: add support for TIF_NOTIFY_SIGNAL
sh: add support for TIF_NOTIFY_SIGNAL
um: add support for TIF_NOTIFY_SIGNAL
...
-----BEGIN PGP SIGNATURE-----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=J+S/
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20201214' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
"A small set of audit patches for v5.11 with four patches in total and
only one of any real significance.
Richard's patch to trigger accompanying records causes the kernel to
emit additional related records when an audit event occurs; helping
provide some much needed context to events in the audit log. It is
also worth mentioning that this is a revised patch based on an earlier
attempt that had to be reverted in the v5.8 time frame.
Everything passes our test suite, and with no problems reported please
merge this for v5.11"
* tag 'audit-pr-20201214' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: replace atomic_add_return()
audit: fix macros warnings
audit: trigger accompanying records when no rules present
audit: fix a kernel-doc markup
-----BEGIN PGP SIGNATURE-----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=1gUa
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Finally allow parallel writes and reads into/from the lockless
ringbuffer. But it is not a complete solution. Readers are still
serialized against each other. And nested writes are still prevented
by printk_safe per-CPU buffers.
- Use ttynull as the ultimate fallback for /dev/console.
- Officially allow disabling console output by using console="" or
console=null
- A few code cleanups
* tag 'printk-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: remove logbuf_lock writer-protection of ringbuffer
printk: inline log_output(),log_store() in vprintk_store()
printk: remove obsolete dead assignment
printk/console: Allow to disable console output by using console="" or console=null
init/console: Use ttynull as a fallback when there is no console
printk: ringbuffer: Reference text_data_ring directly in callees.
can_stop_idle_tick() checks whether the do_timer() duty has been taken over
by a CPU on boot. That's silly because the boot CPU always takes over with
the initial clockevent device.
But even if no CPU would have installed a clockevent and taken over the
duty then the question whether the tick on the current CPU can be stopped
or not is moot. In that case the current CPU would have no clockevent
either, so there would be nothing to keep ticking.
Remove it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20201206212002.725238293@linutronix.de
tick_handover_do_timer() which is invoked when a CPU is unplugged has a
check for cpumask_first(cpu_online_mask) when it tries to hand over the
tick update duty.
Checking the result of cpumask_first() there is pointless because if the
online mask is empty at this point, then this would be the last CPU in the
system going offline, which is impossible. There is always at least one CPU
remaining. If online mask would be really empty then the timer duty would
be the least of the resulting problems.
Remove the well meant check simply because it is pointless and confusing.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20201206212002.582579516@linutronix.de
This cleans up two ancient timer features that were never completed in
the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET.
There was only one user left for the ARCH_USES_GETTIMEOFFSET variant
of clocksource implementations, the ARM EBSA110 platform. Rather than
changing to use modern timekeeping, we remove the platform entirely as
Russell no longer uses his machine and nobody else seems to have one
any more.
The conditional code for using arch_gettimeoffset() is removed as
a result.
For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms
not using clockevent drivers: parisc, ia64, most of m68k, and one
Arm platform. These all do timer ticks slighly differently, and this
gets cleaned up to the point they at least all call the same helper
function. Instead of most platforms using 'select GENERIC_CLOCKEVENTS'
in Kconfig, the polarity is now reversed, with the few remaining ones
selecting LEGACY_TIMER_TICK instead.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=QpNs
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic cross-architecture timer cleanup from Arnd Bergmann:
"This cleans up two ancient timer features that were never completed in
the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET.
There was only one user left for the ARCH_USES_GETTIMEOFFSET variant
of clocksource implementations, the ARM EBSA110 platform. Rather than
changing to use modern timekeeping, we remove the platform entirely as
Russell no longer uses his machine and nobody else seems to have one
any more.
The conditional code for using arch_gettimeoffset() is removed as a
result.
For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms
not using clockevent drivers: parisc, ia64, most of m68k, and one Arm
platform. These all do timer ticks slighly differently, and this gets
cleaned up to the point they at least all call the same helper
function.
Instead of most platforms using 'select GENERIC_CLOCKEVENTS' in
Kconfig, the polarity is now reversed, with the few remaining ones
selecting LEGACY_TIMER_TICK instead"
* tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
timekeeping: default GENERIC_CLOCKEVENTS to enabled
timekeeping: remove xtime_update
m68k: remove timer_interrupt() function
m68k: change remaining timers to legacy_timer_tick
m68k: m68328: use legacy_timer_tick()
m68k: sun3/sun3c: use legacy_timer_tick
m68k: split heartbeat out of timer function
m68k: coldfire: use legacy_timer_tick()
parisc: use legacy_timer_tick
ARM: rpc: use legacy_timer_tick
ia64: convert to legacy_timer_tick
timekeeping: add CONFIG_LEGACY_TIMER_TICK
timekeeping: remove arch_gettimeoffset
net: remove am79c961a driver
ARM: remove ebsa110 platform
Merge yet more updates from Andrew Morton:
- lots of little subsystems
- a few post-linux-next MM material. Most of the rest awaits more
merging of other trees.
Subsystems affected by this series: alpha, procfs, misc, core-kernel,
bitmap, lib, lz4, checkpatch, nilfs, kdump, rapidio, gcov, bfs, relay,
resource, ubsan, reboot, fault-injection, lzo, apparmor, and mm (swap,
memory-hotplug, pagemap, cleanups, and gup).
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (86 commits)
mm: fix some spelling mistakes in comments
mm: simplify follow_pte{,pmd}
mm: unexport follow_pte_pmd
apparmor: remove duplicate macro list_entry_is_head()
lib/lzo/lzo1x_compress.c: make lzogeneric1x_1_compress() static
fault-injection: handle EI_ETYPE_TRUE
reboot: hide from sysfs not applicable settings
reboot: allow to override reboot type if quirks are found
reboot: remove cf9_safe from allowed types and rename cf9_force
reboot: allow to specify reboot mode via sysfs
reboot: refactor and comment the cpu selection code
lib/ubsan.c: mark type_check_kinds with static keyword
kcov: don't instrument with UBSAN
ubsan: expand tests and reporting
ubsan: remove UBSAN_MISC in favor of individual options
ubsan: enable for all*config builds
ubsan: disable UBSAN_TRAP for all*config
ubsan: disable object-size sanitizer under GCC
ubsan: move cc-option tests into Kconfig
ubsan: remove redundant -Wno-maybe-uninitialized
...
Commit af3b854492 ("mm/page_alloc.c: allow error injection")
introduced EI_ETYPE_TRUE, but did not extend
* lib/error-inject.c:error_type_string(), and
* kernel/fail_function.c:adjust_error_retval()
to accommodate for this change.
Handle EI_ETYPE_TRUE in both functions appropriately by
* returning "TRUE" in error_type_string(),
* adjusting the return value to true (1) in adjust_error_retval().
Furthermore, simplify the logic of handling EI_ETYPE_NULL in
adjust_error_retval().
Link: https://lkml.kernel.org/r/njB1czX0ZgWPR9h61euHIBb5bEyePw9D4D2m3i5lc9Cl96P8Q1308dTcmsEZW7Vtz3Ifz4do-rOtSfuFTyGoEDYokkK2aUqBePVptzZEWfU=@protonmail.com
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Not all the reboot settings from both the kernel command line or sysfs
interface are available to all platforms.
Filter out reboot_type and reboot_force which are x86 only, and also
remove reboot_cpu on kernels without SMP support.
This saves some space, and avoid confusing the user with settings which
will have no effect.
Link: https://lkml.kernel.org/r/20201130173717.198952-3-mcroce@linux.microsoft.com
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "reboot: sysfs improvements".
Some improvements to the sysfs reboot interface: hide not working settings
and support machines with known reboot quirks.
This patch (of 2):
On some machines a quirk can force a specific reboot type. Quirks are
found during a DMI scan, the list of machines which need special reboot
handling is defined in reboot_dmi_table.
The kernel command line reboot= option overrides this via a global
variable `reboot_default`, so that the reboot type requested in the
command line is really performed.
This was not true when setting the reboot type via the new sysfs
interface. Fix this by setting reboot_default upon the first change, like
reboot_setup() does for the command line.
Link: https://lkml.kernel.org/r/20201130173717.198952-1-mcroce@linux.microsoft.com
Link: https://lkml.kernel.org/r/20201130173717.198952-2-mcroce@linux.microsoft.com
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
BOOT_CF9_SAFE_STR is an internal value used only by the x86 code and it's
not possible to set it from userspace.
Remove it, and rename 'cf9_force' to 'pci', so to make it coherent with
the kernel command line reboot= option.
Tested with this script:
cd /sys/kernel/reboot/
for i in cold warm hard soft gpio; do
echo $i >mode
read j <mode
[ $i = $j ] || echo "mode $i != $j"
done
for i in bios acpi kbd triple efi pci; do
echo $i >type
read j <type
[ $i = $j ] || echo "type $i != $j"
done
for i in $(seq 0 $(nproc --ignore=1)); do
echo $i >cpu
read j <cpu
[ $i = $j ] || echo "cpu $i != $j"
done
for i in 0 1; do
echo $i >force
read j <force
[ $i = $j ] || echo "force $i != $j"
done
Link: https://lkml.kernel.org/r/20201113015900.543923-1-mcroce@linux.microsoft.com
Fixes: eab8da48579d ("reboot: allow to specify reboot mode via sysfs")
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The kernel cmdline reboot= option offers some sort of control on how the
reboot is issued.
We don't always know in advance what type of reboot to perform.
Sometimes a warm reboot is preferred to persist certain memory regions
across the reboot. Others a cold one is needed to apply a future system
update that makes a memory memory model change, like changing the base
page size or resizing a persistent memory region.
Or simply we want to enable reboot_force because we noticed that
something bad happened.
Add handles in sysfs to allow setting these reboot options, so they can
be changed when the system is booted, other than at boot time.
The handlers are under <sysfs>/kernel/reboot, can be read to get the
current configuration and written to alter it.
# cd /sys/kernel/reboot/
# grep . *
cpu:0
force:0
mode:cold
type:acpi
# echo 2 >cpu
# echo yes >force
# echo soft >mode
# echo bios >type
# grep . *
cpu:2
force:1
mode:soft
type:bios
Before setting anything, check for CAP_SYS_BOOT capability, so it's
possible to allow an unpriviledged process to change these settings simply
by relaxing the handles permissions, without opening them to the world.
[natechancellor@gmail.com: fix variable assignments in type_store]
Link: https://lkml.kernel.org/r/20201112035023.974748-1-natechancellor@gmail.com
Link: https://github.com/ClangBuiltLinux/linux/issues/1197
Link: https://lkml.kernel.org/r/20201110202746.9690-1-mcroce@linux.microsoft.com
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Tyler Hicks <tyhicks@linux.microsoft.com>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Small improvements to the code, without changing the way it works:
- use a local variable, to avoid a small time lapse where reboot_cpu
can have an invalid value
- comment the code which is not easy to understand at a glance
- merge two identical code blocks into one
- replace pointer arithmetics with equivalent array syntax
Link: https://lkml.kernel.org/r/20201103214025.116799-4-mcroce@linux.microsoft.com
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Robin Holt <robinmholt@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Both KCOV and UBSAN use compiler instrumentation. If UBSAN detects a bug
in KCOV, it may cause infinite recursion via printk and other common
functions. We already don't instrument KCOV with KASAN/KCSAN for this
reason, don't instrument it with UBSAN as well.
As a side effect this also resolves the following gcc warning:
conflicting types for built-in function '__sanitizer_cov_trace_switch';
expected 'void(long unsigned int, void *)'
[-Wbuiltin-declaration-mismatch]
It's only reported when kcov.c is compiled with any of the sanitizers
enabled. Size of the arguments is correct, it's just that gcc uses 'long'
on 64-bit arches and 'long long' on 32-bit arches, while kernel type is
always 'long long'.
Link: https://lkml.kernel.org/r/20201209100152.2492072-1-dvyukov@google.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Suggested-by: Marco Elver <elver@google.com>
Acked-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kernel-doc markups should use this format:
identifier - description
While here, fix a kernel-doc tag that was using, instead,
a normal comment block.
[akpm@linux-foundation.org: coding style fixes]
Link: https://lkml.kernel.org/r/c5e38e1070f8dbe2f9607a10b44afe2875bd966c.1605521731.git.mchehab+huawei@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cc: "Jonathan Corbet" <corbet@lwn.net>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that relay_open() accepts const callbacks, make relay callbacks
const.
Link: https://lkml.kernel.org/r/7ff5ce0b735901eb4f10e13da2704f1d8c4a2507.1606153547.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
None of the relay users require the use of mutable structs for callbacks,
however the relay code does. Instead of assigning the default callback
for subbuf_start, add a wrapper to conditionally call the client callback
if available, and fall back to default behaviour otherwise.
This lets all relay users make their struct rchan_callbacks const data.
[jani.nikula@intel.com: cleanups, per Christoph]
Link: https://lkml.kernel.org/r/20201124115412.32402-1-jani.nikula@intel.com
Link: https://lkml.kernel.org/r/cc3ff292e4eb4fdc56bee3d690c7b8e39209cd37.1606153547.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All clients provide create_buf_file and remove_buf_file callbacks, and
they're required for relay to make sense. There is no point in them being
optional.
Also document whether each callback is mandatory/optional.
Link: https://lkml.kernel.org/r/88003c1527386b93036e286e7917f1e33aec84ac.1606153547.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are no clients passing NULL callbacks, which makes sense as it
wouldn't even create a file. Require non-NULL callbacks, and throw away
the handling for NULL callbacks.
Link: https://lkml.kernel.org/r/e40642f3b027d2bb6bc851ddb60e0a61ea51f5f8.1606153547.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "relay: cleanup and const callbacks", v2.
None of the relay users require the use of mutable structs for callbacks,
however the relay code does. Instead of assigning default callbacks when
there is none, add callback wrappers to conditionally call the client
callbacks if available, and fall back to default behaviour (typically
no-op) otherwise.
This lets all relay users make their struct rchan_callbacks const data.
This series starts with a number of cleanups first based on Christoph's
feedback.
This patch (of 9):
No relay client uses the buf_mapped or buf_unmapped callbacks. Remove
them. This makes relay's vm_operations_struct close callback a dummy,
remove it as well.
Link: https://lkml.kernel.org/r/cover.1606153547.git.jani.nikula@intel.com
Link: https://lkml.kernel.org/r/c69fff6e0cd485563604240bbfcc028434983bec.1606153547.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix the following kernel-doc issue in gcov:
kernel/gcov/gcc_4_7.c:238: warning: Function parameter or member 'dst' not described in 'gcov_info_add'
kernel/gcov/gcc_4_7.c:238: warning: Function parameter or member 'src' not described in 'gcov_info_add'
kernel/gcov/gcc_4_7.c:238: warning: Excess function parameter 'dest' description in 'gcov_info_add'
kernel/gcov/gcc_4_7.c:238: warning: Excess function parameter 'source' description in 'gcov_info_add'
Link: https://lkml.kernel.org/r/1605252352-63983-1-git-send-email-alex.shi@linux.alibaba.com
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit 0bddd227f3 ("Documentation: update for gcc 4.9
requirement") the minimum supported version of GCC is gcc-4.9. It's now
safe to remove this code.
Similar to commit 10415533a9 ("gcov: Remove old GCC 3.4 support") but
that was for GCC 4.8 and this is for GCC 4.9.
Link: https://github.com/ClangBuiltLinux/linux/issues/427
Link: https://lkml.kernel.org/r/20201111030557.2015680-1-ndesaulniers@google.com
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The offset of the field 'init_uts_ns.name' has changed since commit
9a56493f69 ("uts: Use generic ns_common::count").
Make the offset of the field 'uts_namespace.name' available in VMCOREINFO
because tools like 'crash-utility' and 'makedumpfile' must be able to read
it from crash dumps.
Link: https://lore.kernel.org/r/159644978167.604812.1773586504374412107.stgit@localhost.localdomain
Link: https://lkml.kernel.org/r/20200930102328.396488-1-egorenar@linux.ibm.com
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: lijiang <lijiang@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cleanup: use #elif instead of #end and #elif.
Link: https://lkml.kernel.org/r/20201015150736.GA91603@rlk
Signed-off-by: Hui Su <sh_def@163.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull exec-update-lock update from Eric Biederman:
"The key point of this is to transform exec_update_mutex into a
rw_semaphore so readers can be separated from writers.
This makes it easier to understand what the holders of the lock are
doing, and makes it harder to contend or deadlock on the lock.
The real deadlock fix wound up in perf_event_open"
* 'exec-update-lock-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
exec: Transform exec_update_mutex into a rw_semaphore
Pull execve updates from Eric Biederman:
"This set of changes ultimately fixes the interaction of posix file
lock and exec. Fundamentally most of the change is just moving where
unshare_files is called during exec, and tweaking the users of
files_struct so that the count of files_struct is not unnecessarily
played with.
Along the way fcheck and related helpers were renamed to more
accurately reflect what they do.
There were also many other small changes that fell out, as this is the
first time in a long time much of this code has been touched.
Benchmarks haven't turned up any practical issues but Al Viro has
observed a possibility for a lot of pounding on task_lock. So I have
some changes in progress to convert put_files_struct to always rcu
free files_struct. That wasn't ready for the merge window so that will
have to wait until next time"
* 'exec-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits)
exec: Move io_uring_task_cancel after the point of no return
coredump: Document coredump code exclusively used by cell spufs
file: Remove get_files_struct
file: Rename __close_fd_get_file close_fd_get_file
file: Replace ksys_close with close_fd
file: Rename __close_fd to close_fd and remove the files parameter
file: Merge __alloc_fd into alloc_fd
file: In f_dupfd read RLIMIT_NOFILE once.
file: Merge __fd_install into fd_install
proc/fd: In fdinfo seq_show don't use get_files_struct
bpf/task_iter: In task_file_seq_get_next use task_lookup_next_fd_rcu
proc/fd: In proc_readfd_common use task_lookup_next_fd_rcu
file: Implement task_lookup_next_fd_rcu
kcmp: In get_file_raw_ptr use task_lookup_fd_rcu
proc/fd: In tid_fd_mode use task_lookup_fd_rcu
file: Implement task_lookup_fd_rcu
file: Rename fcheck lookup_fd_rcu
file: Replace fcheck_files with files_lookup_fd_rcu
file: Factor files_lookup_fd_locked out of fcheck_files
file: Rename __fcheck_files to files_lookup_fd_raw
...
- Update ACPICA code in the kernel to upstream revision 20201113
with changes as follows:
* Add 5 new UUIDs to the known UUID table (Bob Moore).
* Remove extreaneous "the" in comments (Colin Ian King).
* Add function trace macros to improve debugging (Erik Kaneda).
* Fix interpreter memory leak (Erik Kaneda).
* Handle "orphan" _REG for GPIO OpRegions (Hans de Goede).
- Introduce resource_union() and resource_intersection() helpers
and clean up some resource-manipulation code with the help of
them (Andy Shevchenko).
- Revert problematic commit related to the handling of resources
in the ACPI core (Daniel Scally).
- Extend the ACPI device enumeration documentation and the
gpio-line-names _DSD property documentation, clean up the
latter (Flavio Suligoi).
- Clean up _DEP handling during device enumeration, modify the list
of _DEP exceptions and the handling of it and fix up terminology
related to _DEP (Hans de Goede, Rafael Wysocki).
- Eliminate in_interrupt() usage from the ACPI EC driver (Sebastian
Andrzej Siewior).
- Clean up the advance_transaction() routine and related code in
the ACPI EC driver (Rafael Wysocki).
- Add new backlight quirk for GIGABYTE GB-BXBT-2807 (Jasper
St. Pierre).
- Make assorted janitorial changes in several ACPI-related pieces
of code (Hanjun Guo, Jason Yan, Punit Agrawal).
-----BEGIN PGP SIGNATURE-----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=5LZe
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to upstream revision
20201113, fix and clean up some resources manipulation code, extend
the enumeration and gpio-line-names property documentation, clean up
the handling of _DEP during device enumeration, add a new backlight
DMI quirk, clean up transaction handling in the EC driver and make
some assorted janitorial changes.
Specifics:
- Update ACPICA code in the kernel to upstream revision 20201113 with
changes as follows:
* Add 5 new UUIDs to the known UUID table (Bob Moore)
* Remove extreaneous "the" in comments (Colin Ian King)
* Add function trace macros to improve debugging (Erik Kaneda)
* Fix interpreter memory leak (Erik Kaneda)
* Handle "orphan" _REG for GPIO OpRegions (Hans de Goede)
- Introduce resource_union() and resource_intersection() helpers and
clean up some resource-manipulation code with the help of them
(Andy Shevchenko)
- Revert problematic commit related to the handling of resources in
the ACPI core (Daniel Scally)
- Extend the ACPI device enumeration documentation and the
gpio-line-names _DSD property documentation, clean up the latter
(Flavio Suligoi)
- Clean up _DEP handling during device enumeration, modify the list
of _DEP exceptions and the handling of it and fix up terminology
related to _DEP (Hans de Goede, Rafael Wysocki)
- Eliminate in_interrupt() usage from the ACPI EC driver (Sebastian
Andrzej Siewior)
- Clean up the advance_transaction() routine and related code in the
ACPI EC driver (Rafael Wysocki)
- Add new backlight quirk for GIGABYTE GB-BXBT-2807 (Jasper St
Pierre)
- Make assorted janitorial changes in several ACPI-related pieces of
code (Hanjun Guo, Jason Yan, Punit Agrawal)"
* tag 'acpi-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (40 commits)
ACPI: scan: Fix up _DEP-related terminology with supplier/consumer
ACPI: scan: Drop INT3396 from acpi_ignore_dep_ids[]
ACPI: video: Add DMI quirk for GIGABYTE GB-BXBT-2807
Revert "ACPI / resources: Use AE_CTRL_TERMINATE to terminate resources walks"
ACPI: scan: Add PNP0D80 to the _DEP exceptions list
ACPI: scan: Call acpi_get_object_info() from acpi_add_single_object()
ACPI: scan: Add acpi_info_matches_hids() helper
ACPICA: Update version to 20201113
ACPICA: Interpreter: fix memory leak by using existing buffer
ACPICA: Add function trace macros to improve debugging
ACPICA: Also handle "orphan" _REG methods for GPIO OpRegions
ACPICA: Remove extreaneous "the" in comments
ACPICA: Add 5 new UUIDs to the known UUID table
resource: provide meaningful MODULE_LICENSE() in test suite
ASoC: Intel: catpt: Replace open coded variant of resource_intersection()
ACPI: processor: Drop duplicate setting of shared_cpu_map
ACPI: EC: Clean up status flags checks in advance_transaction()
ACPI: EC: Untangle error handling in advance_transaction()
ACPI: EC: Simplify error handling in advance_transaction()
ACPI: EC: Rename acpi_ec_is_gpe_raised()
...
- Use local_clock() instead of jiffies in the cpufreq statistics to
improve accuracy (Viresh Kumar).
- Fix up OPP usage in the cpufreq-dt and qcom-cpufreq-nvmem cpufreq
drivers (Viresh Kumar).
- Clean up the cpufreq core, the intel_pstate driver and the
schedutil cpufreq governor (Rafael Wysocki).
- Fix up error code paths in the sti-cpufreq and mediatek cpufreq
drivers (Yangtao Li, Qinglang Miao).
- Fix cpufreq_online() to return error codes instead of success (0)
in all cases when it fails (Wang ShaoBo).
- Add mt8167 support to the mediatek cpufreq driver and blacklist
mt8516 in the cpufreq-dt-platdev driver (Fabien Parent).
- Modify the tegra194 cpufreq driver to always return values from
the frequency table as the current frequency and clean up that
driver (Sumit Gupta, Jon Hunter).
- Modify the arm_scmi cpufreq driver to allow it to discover the
power scale present in the performance protocol and provide this
information to the Energy Model (Lukasz Luba).
- Add missing MODULE_DEVICE_TABLE to several cpufreq drivers (Pali
Rohár).
- Clean up the CPPC cpufreq driver (Ionela Voinescu).
- Fix NVMEM_IMX_OCOTP dependency in the imx cpufreq driver (Arnd
Bergmann).
- Rework the poling interval selection for the polling state in
cpuidle (Mel Gorman).
- Enable suspend-to-idle for PSCI OSI mode in the PSCI cpuidle
driver (Ulf Hansson).
- Modify the OPP framework to support empty (node-less) OPP tables
in DT for passing dependency information (Nicola Mazzucato).
- Fix potential lockdep issue in the OPP core and clean up the OPP
core (Viresh Kumar).
- Modify dev_pm_opp_put_regulators() to accept a NULL argument and
update its users accordingly (Viresh Kumar).
- Add frequency changes tracepoint to devfreq (Matthias Kaehlcke).
- Add support for governor feature flags to devfreq, make devfreq
sysfs file permissions depend on the governor and clean up the
devfreq core (Chanwoo Choi).
- Clean up the tegra20 devfreq driver and deprecate it to allow
another driver based on EMC_STAT to be used instead of it (Dmitry
Osipenko).
- Add interconnect support to the tegra30 devfreq driver, allow it
to take the interconnect and OPP information from DT and clean it
up ((Dmitry Osipenko).
- Add interconnect support to the exynos-bus devfreq driver along
with interconnect properties documentation (Sylwester Nawrocki).
- Add suport for AMD Fam17h and Fam19h processors to the RAPL power
capping driver (Victor Ding, Kim Phillips).
- Fix handling of overly long constraint names in the powercap
framework (Lukasz Luba).
- Fix the wakeup configuration handling for bridges in the ACPI
device power management core (Rafael Wysocki).
- Add support for using an abstract scale for power units in the
Energy Model (EM) and document it (Lukasz Luba).
- Add em_cpu_energy() micro-optimization to the EM (Pavankumar
Kondeti).
- Modify the generic power domains (genpd) framwework to support
suspend-to-idle (Ulf Hansson).
- Fix creation of debugfs nodes in genpd (Thierry Strudel).
- Clean up genpd (Lina Iyer).
- Clean up the core system-wide suspend code and make it print
driver flags for devices with debug enabled (Alex Shi, Patrice
Chotard, Chen Yu).
- Modify the ACPI system reboot code to make it prepare for system
power off to avoid confusing the platform firmware (Kai-Heng Feng).
- Update the pm-graph (multiple changes, mostly usability-related)
and cpupower (online and offline CPU information support) PM
utilities (Todd Brandt, Brahadambal Srinivasan).
-----BEGIN PGP SIGNATURE-----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=BVdX
-----END PGP SIGNATURE-----
Merge tag 'pm-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These update cpufreq (core and drivers), cpuidle (polling state
implementation and the PSCI driver), the OPP (operating performance
points) framework, devfreq (core and drivers), the power capping RAPL
(Running Average Power Limit) driver, the Energy Model support, the
generic power domains (genpd) framework, the ACPI device power
management, the core system-wide suspend code and power management
utilities.
Specifics:
- Use local_clock() instead of jiffies in the cpufreq statistics to
improve accuracy (Viresh Kumar).
- Fix up OPP usage in the cpufreq-dt and qcom-cpufreq-nvmem cpufreq
drivers (Viresh Kumar).
- Clean up the cpufreq core, the intel_pstate driver and the
schedutil cpufreq governor (Rafael Wysocki).
- Fix up error code paths in the sti-cpufreq and mediatek cpufreq
drivers (Yangtao Li, Qinglang Miao).
- Fix cpufreq_online() to return error codes instead of success (0)
in all cases when it fails (Wang ShaoBo).
- Add mt8167 support to the mediatek cpufreq driver and blacklist
mt8516 in the cpufreq-dt-platdev driver (Fabien Parent).
- Modify the tegra194 cpufreq driver to always return values from the
frequency table as the current frequency and clean up that driver
(Sumit Gupta, Jon Hunter).
- Modify the arm_scmi cpufreq driver to allow it to discover the
power scale present in the performance protocol and provide this
information to the Energy Model (Lukasz Luba).
- Add missing MODULE_DEVICE_TABLE to several cpufreq drivers (Pali
Rohár).
- Clean up the CPPC cpufreq driver (Ionela Voinescu).
- Fix NVMEM_IMX_OCOTP dependency in the imx cpufreq driver (Arnd
Bergmann).
- Rework the poling interval selection for the polling state in
cpuidle (Mel Gorman).
- Enable suspend-to-idle for PSCI OSI mode in the PSCI cpuidle driver
(Ulf Hansson).
- Modify the OPP framework to support empty (node-less) OPP tables in
DT for passing dependency information (Nicola Mazzucato).
- Fix potential lockdep issue in the OPP core and clean up the OPP
core (Viresh Kumar).
- Modify dev_pm_opp_put_regulators() to accept a NULL argument and
update its users accordingly (Viresh Kumar).
- Add frequency changes tracepoint to devfreq (Matthias Kaehlcke).
- Add support for governor feature flags to devfreq, make devfreq
sysfs file permissions depend on the governor and clean up the
devfreq core (Chanwoo Choi).
- Clean up the tegra20 devfreq driver and deprecate it to allow
another driver based on EMC_STAT to be used instead of it (Dmitry
Osipenko).
- Add interconnect support to the tegra30 devfreq driver, allow it to
take the interconnect and OPP information from DT and clean it up
(Dmitry Osipenko).
- Add interconnect support to the exynos-bus devfreq driver along
with interconnect properties documentation (Sylwester Nawrocki).
- Add suport for AMD Fam17h and Fam19h processors to the RAPL power
capping driver (Victor Ding, Kim Phillips).
- Fix handling of overly long constraint names in the powercap
framework (Lukasz Luba).
- Fix the wakeup configuration handling for bridges in the ACPI
device power management core (Rafael Wysocki).
- Add support for using an abstract scale for power units in the
Energy Model (EM) and document it (Lukasz Luba).
- Add em_cpu_energy() micro-optimization to the EM (Pavankumar
Kondeti).
- Modify the generic power domains (genpd) framwework to support
suspend-to-idle (Ulf Hansson).
- Fix creation of debugfs nodes in genpd (Thierry Strudel).
- Clean up genpd (Lina Iyer).
- Clean up the core system-wide suspend code and make it print driver
flags for devices with debug enabled (Alex Shi, Patrice Chotard,
Chen Yu).
- Modify the ACPI system reboot code to make it prepare for system
power off to avoid confusing the platform firmware (Kai-Heng Feng).
- Update the pm-graph (multiple changes, mostly usability-related)
and cpupower (online and offline CPU information support) PM
utilities (Todd Brandt, Brahadambal Srinivasan)"
* tag 'pm-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (86 commits)
cpufreq: Fix cpufreq_online() return value on errors
cpufreq: Fix up several kerneldoc comments
cpufreq: stats: Use local_clock() instead of jiffies
cpufreq: schedutil: Simplify sugov_update_next_freq()
cpufreq: intel_pstate: Simplify intel_cpufreq_update_pstate()
PM: domains: create debugfs nodes when adding power domains
opp: of: Allow empty opp-table with opp-shared
dt-bindings: opp: Allow empty OPP tables
media: venus: dev_pm_opp_put_*() accepts NULL argument
drm/panfrost: dev_pm_opp_put_*() accepts NULL argument
drm/lima: dev_pm_opp_put_*() accepts NULL argument
PM / devfreq: exynos: dev_pm_opp_put_*() accepts NULL argument
cpufreq: qcom-cpufreq-nvmem: dev_pm_opp_put_*() accepts NULL argument
cpufreq: dt: dev_pm_opp_put_regulators() accepts NULL argument
opp: Allow dev_pm_opp_put_*() APIs to accept NULL opp_table
opp: Don't create an OPP table from dev_pm_opp_get_opp_table()
cpufreq: dt: Don't (ab)use dev_pm_opp_get_opp_table() to create OPP table
opp: Reduce the size of critical section in _opp_kref_release()
PM / EM: Micro optimization in em_cpu_energy
cpufreq: arm_scmi: Discover the power scale in performance protocol
...
John Ogness