When triggering a rescan due to a namespace resize we will be
receiving AENs on every controller, triggering a rescan of all
attached namespaces. If multipath is active only the current path and
the ns_head disk will be updated, the other paths will still refer to
the old size until AENs for the remaining controllers are received.
If I/O comes in before that it might be routed to one of the old
paths, triggering an I/O failure with 'access beyond end of device'.
With this patch the old paths are skipped from multipath path
selection until the controller serving these paths has been rescanned.
Signed-off-by: Hannes Reinecke <hare@suse.de>
[dwagner: - introduce NVME_NS_READY flag instead of NVME_NS_INVALIDATE
- use 'revalidate' instead of 'invalidate' which
follows the zoned device code path.
- clear NVME_NS_READY before clearing current_path]
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The nvme multipathing code just dispatches bios to one of the blk-mq
based paths and never blocks on its own, so set QUEUE_FLAG_NOWAIT
to support REQ_NOWAIT bios.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Use the nvme-internal NVME_NSHEAD_DISK_LIVE flag instead of abusing
the block layer state.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210809064028.1198327-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When the last path to a ns_head drops the current code
removes the ns_head from the subsystem list, but will only
delete the disk itself if the last reference to the ns_head
drops. This is causing an refcounting imbalance eg when
applications have a reference to the disk, as then they'll
never get notified that the disk is in fact dead.
This patch moves the call 'del_gendisk' into nvme_mpath_check_last_path(),
ensuring that the disk can be properly removed and applications get the
appropriate notifications.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
-----BEGIN PGP SIGNATURE-----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=D6dS
-----END PGP SIGNATURE-----
Merge tag 'for-5.14/drivers-2021-06-29' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"Pretty calm round, mostly just NVMe and a bit of MD:
- NVMe updates (via Christoph)
- improve the APST configuration algorithm (Alexey Bogoslavsky)
- look for StorageD3Enable on companion ACPI device
(Mario Limonciello)
- allow selecting the network interface for TCP connections
(Martin Belanger)
- misc cleanups (Amit Engel, Chaitanya Kulkarni, Colin Ian King,
Christoph)
- move the ACPI StorageD3 code to drivers/acpi/ and add quirks
for certain AMD CPUs (Mario Limonciello)
- zoned device support for nvmet (Chaitanya Kulkarni)
- fix the rules for changing the serial number in nvmet
(Noam Gottlieb)
- various small fixes and cleanups (Dan Carpenter, JK Kim,
Chaitanya Kulkarni, Hannes Reinecke, Wesley Sheng, Geert
Uytterhoeven, Daniel Wagner)
- MD updates (Via Song)
- iostats rewrite (Guoqing Jiang)
- raid5 lock contention optimization (Gal Ofri)
- Fall through warning fix (Gustavo)
- Misc fixes (Gustavo, Jiapeng)"
* tag 'for-5.14/drivers-2021-06-29' of git://git.kernel.dk/linux-block: (78 commits)
nvmet: use NVMET_MAX_NAMESPACES to set nn value
loop: Fix missing discard support when using LOOP_CONFIGURE
nvme.h: add missing nvme_lba_range_type endianness annotations
nvme: remove zeroout memset call for struct
nvme-pci: remove zeroout memset call for struct
nvmet: remove zeroout memset call for struct
nvmet: add ZBD over ZNS backend support
nvmet: add Command Set Identifier support
nvmet: add nvmet_req_bio put helper for backends
nvmet: add req cns error complete helper
block: export blk_next_bio()
nvmet: remove local variable
nvmet: use nvme status value directly
nvmet: use u32 type for the local variable nsid
nvmet: use u32 for nvmet_subsys max_nsid
nvmet: use req->cmd directly in file-ns fast path
nvmet: use req->cmd directly in bdev-ns fast path
nvmet: make ver stable once connection established
nvmet: allow mn change if subsys not discovered
nvmet: make sn stable once connection was established
...
Commit ce86dad222 ("nvme-multipath: reset bdev to ns head when
failover") moved the reset code where the bio is added to the
requeue_list for the failover path. But it left the original
bio_set_dev in nvme_requeue_work.
There is a second path to nvme_requee_work. It is via
nvme_ns_head_submit_bio. Though we don't have to set bio->bi_bdev for
this path either, as it points to the correct bdev already.
Let's remove the bio_set_dev. It's updating the bio->bi_bdev with the
same pointer and thus it's unnecessary.
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The controller is required to have a non-zero MNAN value if it supports
ANA:
If the controller supports Asymmetric Namespace Access Reporting, then
this field shall be set to a non-zero value that is less than or equal
to the NN value.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Split multipath support out of nvme_report_zones into a separate helper
and simplify the non-multipath version as a result.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Convert the nvme-multipath driver to use the blk_alloc_disk and
blk_cleanup_disk helpers to simplify gendisk and request_queue
allocation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20210521055116.1053587-19-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Automatically set the GENHD_FL_EXT_DEVT flag for all disks allocated
without an explicit number of minors. This is what all new block
drivers should do, so make sure it is the default without boilerplate
code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20210521055116.1053587-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
nvme_init_identify and thus nvme_mpath_init can be called multiple
times and thus must not overwrite potentially initialized or in-use
fields. Split out a helper for the basic initialization when the
controller is initialized and make sure the init_identify path does
not blindly change in-use data structures.
Fixes: 0d0b660f21 ("nvme: add ANA support")
Reported-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
When a request finally completes in end_io() after it has failed over,
the bdev pointer can be stale and thus the system can crash. Set the
bdev back to ns head, so the request is map to an active path when
resubmitted.
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Userspace has not been allowed to I/O to device that's failed to
be initialized. This patch introduces generic per-namespace character
device to allow userspace to I/O regardless the block device is there or
not.
The chardev naming convention will similar to the existing blkdev naming,
using a ng prefix instead of nvme, i.e.
- /dev/ngXnY
It also supports multipath which means it will not expose chardev for the
hidden namespace blkdevs (e.g., nvmeXcYnZ). If /dev/ngXnY is created for
a ns_head, then I/O request will be routed to a specific controller
selected by the iopolicy of the subsystem.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Tested-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Move the multipath block_device_operations to multipath.c, where they
belong.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Return false from nvme_set_disk_name and let the caller set the
non-multipath name instead of duplicating the naming information in two
places. Also remove the pointless local variables for the disk name
and flags and the not needed ctrl argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Javier González <javier.gonz@samsung.com>
There is a single trailing whitespace in multipath.c.
Since this is just a single whitespace, the chances of this affecting
backports to stable should be quite low, so let's just remove it.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
If ANA is enabled but no ANA group descriptor is found when creating
a new namespace the ANA log is most likely out of date, so trigger
a re-read. The namespace will be tagged with the NS_ANA_PENDING flag
to exclude it from path selection until the ANA log has been re-read.
Fixes: 32acab3181 ("nvme: implement multipath access to nvme subsystems")
Reported-by: Martin George <marting@netapp.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
sysfs_emit is the recommended API to use for formatting strings to be
returned to user space. It is equivalent to scnprintf and aware of the
PAGE_SIZE buffer size.
Suggested-by: Chaitanya Kulkarni <Chaitanya.Kulkarni@wdc.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
-----BEGIN PGP SIGNATURE-----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=vx6U
-----END PGP SIGNATURE-----
Merge tag 'for-5.12/drivers-2021-02-17' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
- Remove the skd driver. It's been EOL for a long time (Damien)
- NVMe pull requests
- fix multipath handling of ->queue_rq errors (Chao Leng)
- nvmet cleanups (Chaitanya Kulkarni)
- add a quirk for buggy Amazon controller (Filippo Sironi)
- avoid devm allocations in nvme-hwmon that don't interact well
with fabrics (Hannes Reinecke)
- sysfs cleanups (Jiapeng Chong)
- fix nr_zones for multipath (Keith Busch)
- nvme-tcp crash fix for no-data commands (Sagi Grimberg)
- nvmet-tcp fixes (Sagi Grimberg)
- add a missing __rcu annotation (Christoph)
- failed reconnect fixes (Chao Leng)
- various tracing improvements (Michal Krakowiak, Johannes
Thumshirn)
- switch the nvmet-fc assoc_list to use RCU protection (Leonid
Ravich)
- resync the status codes with the latest spec (Max Gurtovoy)
- minor nvme-tcp improvements (Sagi Grimberg)
- various cleanups (Rikard Falkeborn, Minwoo Im, Chaitanya
Kulkarni, Israel Rukshin)
- Floppy O_NDELAY fix (Denis)
- MD pull request
- raid5 chunk_sectors fix (Guoqing)
- Use lore links (Kees)
- Use DEFINE_SHOW_ATTRIBUTE for nbd (Liao)
- loop lock scaling (Pavel)
- mtip32xx PCI fixes (Bjorn)
- bcache fixes (Kai, Dongdong)
- Misc fixes (Tian, Yang, Guoqing, Joe, Andy)
* tag 'for-5.12/drivers-2021-02-17' of git://git.kernel.dk/linux-block: (64 commits)
lightnvm: pblk: Replace guid_copy() with export_guid()/import_guid()
lightnvm: fix unnecessary NULL check warnings
nvme-tcp: fix crash triggered with a dataless request submission
block: Replace lkml.org links with lore
nbd: Convert to DEFINE_SHOW_ATTRIBUTE
nvme: add 48-bit DMA address quirk for Amazon NVMe controllers
nvme-hwmon: rework to avoid devm allocation
nvmet: remove else at the end of the function
nvmet: add nvmet_req_subsys() helper
nvmet: use min of device_path and disk len
nvmet: use invalid cmd opcode helper
nvmet: use invalid cmd opcode helper
nvmet: add helper to report invalid opcode
nvmet: remove extra variable in id-ns handler
nvmet: make nvmet_find_namespace() req based
nvmet: return uniform error for invalid ns
nvmet: set status to 0 in case for invalid nsid
nvmet-fc: add a missing __rcu annotation to nvmet_fc_tgt_assoc.queues
nvme-multipath: set nr_zones for zoned namespaces
nvmet-tcp: fix potential race of tcp socket closing accept_work
...
-----BEGIN PGP SIGNATURE-----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=os1E
-----END PGP SIGNATURE-----
Merge tag 'for-5.12/block-2021-02-17' of git://git.kernel.dk/linux-block
Pull core block updates from Jens Axboe:
"Another nice round of removing more code than what is added, mostly
due to Christoph's relentless pursuit of tech debt removal/cleanups.
This pull request contains:
- Two series of BFQ improvements (Paolo, Jan, Jia)
- Block iov_iter improvements (Pavel)
- bsg error path fix (Pan)
- blk-mq scheduler improvements (Jan)
- -EBUSY discard fix (Jan)
- bvec allocation improvements (Ming, Christoph)
- bio allocation and init improvements (Christoph)
- Store bdev pointer in bio instead of gendisk + partno (Christoph)
- Block trace point cleanups (Christoph)
- hard read-only vs read-only split (Christoph)
- Block based swap cleanups (Christoph)
- Zoned write granularity support (Damien)
- Various fixes/tweaks (Chunguang, Guoqing, Lei, Lukas, Huhai)"
* tag 'for-5.12/block-2021-02-17' of git://git.kernel.dk/linux-block: (104 commits)
mm: simplify swapdev_block
sd_zbc: clear zone resources for non-zoned case
block: introduce blk_queue_clear_zone_settings()
zonefs: use zone write granularity as block size
block: introduce zone_write_granularity limit
block: use blk_queue_set_zoned in add_partition()
nullb: use blk_queue_set_zoned() to setup zoned devices
nvme: cleanup zone information initialization
block: document zone_append_max_bytes attribute
block: use bi_max_vecs to find the bvec pool
md/raid10: remove dead code in reshape_request
block: mark the bio as cloned in bio_iov_bvec_set
block: set BIO_NO_PAGE_REF in bio_iov_bvec_set
block: remove a layer of indentation in bio_iov_iter_get_pages
block: turn the nr_iovecs argument to bio_alloc* into an unsigned short
block: remove the 1 and 4 vec bvec_slabs entries
block: streamline bvec_alloc
block: factor out a bvec_alloc_gfp helper
block: move struct biovec_slab to bio.c
block: reuse BIO_INLINE_VECS for integrity bvecs
...
The bio based drivers only require the request_queue's nr_zones is set,
so set this field in the head if the namespace path is zoned.
Fixes: 240e6ee272 ("nvme: support for zoned namespaces")
Reported-by: Minwoo Im <minwoo.im.dev@gmail.com>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
nvme_round_robin_path() should test if the return ns pointer is valid.
nvme_next_ns() will return a NULL pointer if there is no path left.
Fixes: 75c10e7327 ("nvme-multipath: round-robin I/O policy")
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Always use the bio_set_dev helper to assign ->bi_bdev to make sure
other state related to the device is uptodate.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace the gendisk pointer in struct bio with a pointer to the newly
improved struct block device. From that the gendisk can be trivially
accessed with an extra indirection, but it also allows to directly
look up all information related to partition remapping.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=ayp2
-----END PGP SIGNATURE-----
Merge tag 'for-5.11/drivers-2020-12-14' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"Nothing major in here:
- NVMe pull request from Christoph:
- nvmet passthrough improvements (Chaitanya Kulkarni)
- fcloop error injection support (James Smart)
- read-only support for zoned namespaces without Zone Append
(Javier González)
- improve some error message (Minwoo Im)
- reject I/O to offline fabrics namespaces (Victor Gladkov)
- PCI queue allocation cleanups (Niklas Schnelle)
- remove an unused allocation in nvmet (Amit Engel)
- a Kconfig spelling fix (Colin Ian King)
- nvme_req_qid simplication (Baolin Wang)
- MD pull request from Song:
- Fix race condition in md_ioctl() (Dae R. Jeong)
- Initialize read_slot properly for raid10 (Kevin Vigor)
- Code cleanup (Pankaj Gupta)
- md-cluster resync/reshape fix (Zhao Heming)
- Move null_blk into its own directory (Damien Le Moal)
- null_blk zone and discard improvements (Damien Le Moal)
- bcache race fix (Dongsheng Yang)
- Set of rnbd fixes/improvements (Gioh Kim, Guoqing Jiang, Jack Wang,
Lutz Pogrell, Md Haris Iqbal)
- lightnvm NULL pointer deref fix (tangzhenhao)
- sr in_interrupt() removal (Sebastian Andrzej Siewior)
- FC endpoint security support for s390/dasd (Jan Höppner, Sebastian
Ott, Vineeth Vijayan). From the s390 arch guys, arch bits included
as it made it easier for them to funnel the feature through the
block driver tree.
- Follow up fixes (Colin Ian King)"
* tag 'for-5.11/drivers-2020-12-14' of git://git.kernel.dk/linux-block: (64 commits)
block: drop dead assignments in loop_init()
sr: Remove in_interrupt() usage in sr_init_command().
sr: Switch the sector size back to 2048 if sr_read_sector() changed it.
cdrom: Reset sector_size back it is not 2048.
drivers/lightnvm: fix a null-ptr-deref bug in pblk-core.c
null_blk: Move driver into its own directory
null_blk: Allow controlling max_hw_sectors limit
null_blk: discard zones on reset
null_blk: cleanup discard handling
null_blk: Improve implicit zone close
null_blk: improve zone locking
block: Align max_hw_sectors to logical blocksize
null_blk: Fail zone append to conventional zones
null_blk: Fix zone size initialization
bcache: fix race between setting bdev state to none and new write request direct to backing
block/rnbd: fix a null pointer dereference on dev->blk_symlink_name
block/rnbd-clt: Dynamically alloc buffer for pathname & blk_symlink_name
block/rnbd: call kobject_put in the failure path
Documentation/ABI/rnbd-srv: add document for force_close
block/rnbd-srv: close a mapped device from server side.
...
The request_queue can trivially be derived from the bio.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commands get stuck while Host NVMe-oF controller is in reconnect state.
The controller enters into reconnect state when it loses connection with
the target. It tries to reconnect every 10 seconds (default) until
a successful reconnect or until the reconnect time-out is reached.
The default reconnect time out is 10 minutes.
Applications are expecting commands to complete with success or error
within a certain timeout (30 seconds by default). The NVMe host is
enforcing that timeout while it is connected, but during reconnect the
timeout is not enforced and commands may get stuck for a long period or
even forever.
To fix this long delay due to the default timeout, introduce new
"fast_io_fail_tmo" session parameter. The timeout is measured in seconds
from the controller reconnect and any command beyond that timeout is
rejected. The new parameter value may be passed during 'connect'.
The default value of -1 means no timeout (similar to current behavior).
Signed-off-by: Victor Gladkov <victor.gladkov@kioxia.com>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The BDI_CAP_STABLE_WRITES is one of the few bits of information in the
backing_dev_info shared between the block drivers and the writeback code.
To help untangling the dependency replace it with a queue flag and a
superblock flag derived from it. This also helps with the case of e.g.
a file system requiring stable writes due to its own checksumming, but
not forcing it on other users of the block device like the swap code.
One downside is that we an't support the stable_pages_required bdi
attribute in sysfs anymore. It is replaced with a queue attribute which
also is writable for easier testing.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Lift all the code to decide the dispostition of a completed command
from nvme_complete_rq and nvme_failover_req into a new helper, which
returns an emum of the potential actions. nvme_complete_rq then
just switches on those and calls the proper helper for the action.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we find an optimized path, we quit the loop immediately. Thus we can use
just one variable for the next path, slighly simplifying the code.
Signed-off-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If there's only one usable, non-optimized path, nvme_round_robin_path()
returns NULL, which is wrong. Fix it by falling back to "old", like in
the single optimized path case. Also, if the active path isn't changed,
there's no need to re-assign the pointer.
Fixes: 3f6e3246db ("nvme-multipath: fix logic for non-optimized paths")
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin George <marting@netapp.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When nvme_round_robin_path() finds a valid namespace we should be using it;
falling back to __nvme_find_path() for non-optimized paths will cause the
result from nvme_round_robin_path() to be ignored for non-optimized paths.
Fixes: 75c10e7327 ("nvme-multipath: round-robin I/O policy")
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Handle the special case where we have exactly one optimized path,
which we should keep using in this case.
Fixes: 75c10e7327 ("nvme-multipath: round-robin I/O policy")
Signed off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
A deadlock happens in the following scenario with multipath:
1) scan_work(nvme0) detects a new nsid while nvme0
is an optimized path to it, path nvme1 happens to be
inaccessible.
2) Before scan_work is complete nvme0 disconnect is initiated
nvme_delete_ctrl_sync() sets nvme0 state to NVME_CTRL_DELETING
3) scan_work(1) attempts to submit IO,
but nvme_path_is_optimized() observes nvme0 is not LIVE.
Since nvme1 is a possible path IO is requeued and scan_work hangs.
--
Workqueue: nvme-wq nvme_scan_work [nvme_core]
kernel: Call Trace:
kernel: __schedule+0x2b9/0x6c0
kernel: schedule+0x42/0xb0
kernel: io_schedule+0x16/0x40
kernel: do_read_cache_page+0x438/0x830
kernel: read_cache_page+0x12/0x20
kernel: read_dev_sector+0x27/0xc0
kernel: read_lba+0xc1/0x220
kernel: efi_partition+0x1e6/0x708
kernel: check_partition+0x154/0x244
kernel: rescan_partitions+0xae/0x280
kernel: __blkdev_get+0x40f/0x560
kernel: blkdev_get+0x3d/0x140
kernel: __device_add_disk+0x388/0x480
kernel: device_add_disk+0x13/0x20
kernel: nvme_mpath_set_live+0x119/0x140 [nvme_core]
kernel: nvme_update_ns_ana_state+0x5c/0x60 [nvme_core]
kernel: nvme_set_ns_ana_state+0x1e/0x30 [nvme_core]
kernel: nvme_parse_ana_log+0xa1/0x180 [nvme_core]
kernel: nvme_mpath_add_disk+0x47/0x90 [nvme_core]
kernel: nvme_validate_ns+0x396/0x940 [nvme_core]
kernel: nvme_scan_work+0x24f/0x380 [nvme_core]
kernel: process_one_work+0x1db/0x380
kernel: worker_thread+0x249/0x400
kernel: kthread+0x104/0x140
--
4) Delete also hangs in flush_work(ctrl->scan_work)
from nvme_remove_namespaces().
Similiarly a deadlock with ana_work may happen: if ana_work has started
and calls nvme_mpath_set_live and device_add_disk, it will
trigger I/O. When we trigger disconnect I/O will block because
our accessible (optimized) path is disconnecting, but the alternate
path is inaccessible, so I/O blocks. Then disconnect tries to flush
the ana_work and hangs.
[ 605.550896] Workqueue: nvme-wq nvme_ana_work [nvme_core]
[ 605.552087] Call Trace:
[ 605.552683] __schedule+0x2b9/0x6c0
[ 605.553507] schedule+0x42/0xb0
[ 605.554201] io_schedule+0x16/0x40
[ 605.555012] do_read_cache_page+0x438/0x830
[ 605.556925] read_cache_page+0x12/0x20
[ 605.557757] read_dev_sector+0x27/0xc0
[ 605.558587] amiga_partition+0x4d/0x4c5
[ 605.561278] check_partition+0x154/0x244
[ 605.562138] rescan_partitions+0xae/0x280
[ 605.563076] __blkdev_get+0x40f/0x560
[ 605.563830] blkdev_get+0x3d/0x140
[ 605.564500] __device_add_disk+0x388/0x480
[ 605.565316] device_add_disk+0x13/0x20
[ 605.566070] nvme_mpath_set_live+0x5e/0x130 [nvme_core]
[ 605.567114] nvme_update_ns_ana_state+0x2c/0x30 [nvme_core]
[ 605.568197] nvme_update_ana_state+0xca/0xe0 [nvme_core]
[ 605.569360] nvme_parse_ana_log+0xa1/0x180 [nvme_core]
[ 605.571385] nvme_read_ana_log+0x76/0x100 [nvme_core]
[ 605.572376] nvme_ana_work+0x15/0x20 [nvme_core]
[ 605.573330] process_one_work+0x1db/0x380
[ 605.574144] worker_thread+0x4d/0x400
[ 605.574896] kthread+0x104/0x140
[ 605.577205] ret_from_fork+0x35/0x40
[ 605.577955] INFO: task nvme:14044 blocked for more than 120 seconds.
[ 605.579239] Tainted: G OE 5.3.5-050305-generic #201910071830
[ 605.580712] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 605.582320] nvme D 0 14044 14043 0x00000000
[ 605.583424] Call Trace:
[ 605.583935] __schedule+0x2b9/0x6c0
[ 605.584625] schedule+0x42/0xb0
[ 605.585290] schedule_timeout+0x203/0x2f0
[ 605.588493] wait_for_completion+0xb1/0x120
[ 605.590066] __flush_work+0x123/0x1d0
[ 605.591758] __cancel_work_timer+0x10e/0x190
[ 605.593542] cancel_work_sync+0x10/0x20
[ 605.594347] nvme_mpath_stop+0x2f/0x40 [nvme_core]
[ 605.595328] nvme_stop_ctrl+0x12/0x50 [nvme_core]
[ 605.596262] nvme_do_delete_ctrl+0x3f/0x90 [nvme_core]
[ 605.597333] nvme_sysfs_delete+0x5c/0x70 [nvme_core]
[ 605.598320] dev_attr_store+0x17/0x30
Fix this by introducing a new state: NVME_CTRL_DELETE_NOIO, which will
indicate the phase of controller deletion where I/O cannot be allowed
to access the namespace. NVME_CTRL_DELETING still allows mpath I/O to
be issued to the bottom device, and only after we flush the ana_work
and scan_work (after nvme_stop_ctrl and nvme_prep_remove_namespaces)
we change the state to NVME_CTRL_DELETING_NOIO. Also we prevent ana_work
from re-firing by aborting early if we are not LIVE, so we should be safe
here.
In addition, change the transport drivers to follow the updated state
machine.
Fixes: 0d0b660f21 ("nvme: add ANA support")
Reported-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The Commands Supported and Effects log page was extended with a CSI
field that enables the host to query the log page for each command set
supported. Retrieve this log page for each command set that an attached
namespace supports, and save a pointer to that log in the namespace head.
Reviewed-by: Matias Bjørling <matias.bjorling@wdc.com>
Reviewed-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <keith.busch@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl8CYDYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGcQkH/2vOsPf79yWtsc7x
hd2LpCPfrm7T1xlQcYcXbEbyRI8sqPmguixO8pRI1ePl2lBZ7KurfyeYgYZNGpFU
t74Ph6A6dSWoCgO68Genm/SQuK8ic6o9n1Vr8tDsGDp5KlHWNaweq4JwHrsPmO1T
cI0PR/ClAhLG8cQZ4x988Es5HTNGY17XK27e+M/zKYxSMGY2NRdJBGQIq964i5Q8
2d9G0rtVCaVDzgjrLwaFm6RBu21Il7HV6KsBsacyTFiL1ywx2vnUHzeZQyvuJSOQ
4YpLo9v4tBP10WHC50LRStZyO0qRwPVd/Yl7fL4R/CKsJT9H4uiwasVoEBVSL/k6
CUn3JL0=
=P/Vx
-----END PGP SIGNATURE-----
Merge tag 'v5.8-rc4' into for-5.9/drivers
Merge in 5.8-rc4 for-5.9/block to setup for-5.9/drivers, to provide
a clean base and making the life for the NVMe changes easier.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* tag 'v5.8-rc4': (732 commits)
Linux 5.8-rc4
x86/ldt: use "pr_info_once()" instead of open-coding it badly
MIPS: Do not use smp_processor_id() in preemptible code
MIPS: Add missing EHB in mtc0 -> mfc0 sequence for DSPen
.gitignore: Do not track `defconfig` from `make savedefconfig`
io_uring: fix regression with always ignoring signals in io_cqring_wait()
x86/ldt: Disable 16-bit segments on Xen PV
x86/entry/32: Fix #MC and #DB wiring on x86_32
x86/entry/xen: Route #DB correctly on Xen PV
x86/entry, selftests: Further improve user entry sanity checks
x86/entry/compat: Clear RAX high bits on Xen PV SYSENTER
i2c: mlxcpld: check correct size of maximum RECV_LEN packet
i2c: add Kconfig help text for slave mode
i2c: slave-eeprom: update documentation
i2c: eg20t: Load module automatically if ID matches
i2c: designware: platdrv: Set class based on DMI
i2c: algo-pca: Add 0x78 as SCL stuck low status for PCA9665
mm/page_alloc: fix documentation error
vmalloc: fix the owner argument for the new __vmalloc_node_range callers
mm/cma.c: use exact_nid true to fix possible per-numa cma leak
...
For private namespaces ns->head_disk is NULL, so add a NULL check
before updating the BDI capabilities.
Fixes: b2ce4d9069 ("nvme-multipath: set bdi capabilities once")
Reported-by: Avinash M N <Avinash.M.N@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Now that submit_bio_noacct has a decent blk-mq fast path there is no
more need for this bypass.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
generic_make_request has always been very confusingly misnamed, so rename
it to submit_bio_noacct to make it clear that it is submit_bio minus
accounting and a few checks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The make_request_fn is a little weird in that it sits directly in
struct request_queue instead of an operation vector. Replace it with
a block_device_operations method called submit_bio (which describes much
better what it does). Also remove the request_queue argument to it, as
the queue can be derived pretty trivially from the bio.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The queue can be trivially derived from the bio, so pass one less
argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The mpath disk node takes a reference on the request mpath
request queue when adding live path to the mpath gendisk.
However if we connected to an inaccessible path device_add_disk
is not called, so if we disconnect and remove the mpath gendisk
we endup putting an reference on the request queue that was
never taken [1].
Fix that to check if we ever added a live path (using
NVME_NS_HEAD_HAS_DISK flag) and if not, clear the disk->queue
reference.
[1]:
------------[ cut here ]------------
refcount_t: underflow; use-after-free.
WARNING: CPU: 1 PID: 1372 at lib/refcount.c:28 refcount_warn_saturate+0xa6/0xf0
CPU: 1 PID: 1372 Comm: nvme Tainted: G O 5.7.0-rc2+ #3
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1 04/01/2014
RIP: 0010:refcount_warn_saturate+0xa6/0xf0
RSP: 0018:ffffb29e8053bdc0 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff8b7a2f4fc060 RCX: 0000000000000007
RDX: 0000000000000007 RSI: 0000000000000092 RDI: ffff8b7a3ec99980
RBP: ffff8b7a2f4fc000 R08: 00000000000002e1 R09: 0000000000000004
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
R13: fffffffffffffff2 R14: ffffb29e8053bf08 R15: ffff8b7a320e2da0
FS: 00007f135d4ca800(0000) GS:ffff8b7a3ec80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005651178c0c30 CR3: 000000003b650005 CR4: 0000000000360ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
disk_release+0xa2/0xc0
device_release+0x28/0x80
kobject_put+0xa5/0x1b0
nvme_put_ns_head+0x26/0x70 [nvme_core]
nvme_put_ns+0x30/0x60 [nvme_core]
nvme_remove_namespaces+0x9b/0xe0 [nvme_core]
nvme_do_delete_ctrl+0x43/0x5c [nvme_core]
nvme_sysfs_delete.cold+0x8/0xd [nvme_core]
kernfs_fop_write+0xc1/0x1a0
vfs_write+0xb6/0x1a0
ksys_write+0x5f/0xe0
do_syscall_64+0x52/0x1a0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Reported-by: Anton Eidelman <anton@lightbitslabs.com>
Tested-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
In the following scenario scan_work and ana_work will deadlock:
When scan_work calls nvme_mpath_add_disk() this holds ana_lock
and invokes nvme_parse_ana_log(), which may issue IO
in device_add_disk() and hang waiting for an accessible path.
While nvme_mpath_set_live() only called when nvme_state_is_live(),
a transition may cause NVME_SC_ANA_TRANSITION and requeue the IO.
Since nvme_mpath_set_live() holds ns->head->lock, an ana_work on
ANY ctrl will not be able to complete nvme_mpath_set_live()
on the same ns->head, which is required in order to update
the new accessible path and remove NVME_NS_ANA_PENDING..
Therefore IO never completes: deadlock [1].
Fix:
Move device_add_disk out of the head->lock and protect it with an
atomic test_and_set for a new NVME_NS_HEAD_HAS_DISK bit.
[1]:
kernel: INFO: task kworker/u8:2:160 blocked for more than 120 seconds.
kernel: Tainted: G OE 5.3.5-050305-generic #201910071830
kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kernel: kworker/u8:2 D 0 160 2 0x80004000
kernel: Workqueue: nvme-wq nvme_ana_work [nvme_core]
kernel: Call Trace:
kernel: __schedule+0x2b9/0x6c0
kernel: schedule+0x42/0xb0
kernel: schedule_preempt_disabled+0xe/0x10
kernel: __mutex_lock.isra.0+0x182/0x4f0
kernel: __mutex_lock_slowpath+0x13/0x20
kernel: mutex_lock+0x2e/0x40
kernel: nvme_update_ns_ana_state+0x22/0x60 [nvme_core]
kernel: nvme_update_ana_state+0xca/0xe0 [nvme_core]
kernel: nvme_parse_ana_log+0xa1/0x180 [nvme_core]
kernel: nvme_read_ana_log+0x76/0x100 [nvme_core]
kernel: nvme_ana_work+0x15/0x20 [nvme_core]
kernel: process_one_work+0x1db/0x380
kernel: worker_thread+0x4d/0x400
kernel: kthread+0x104/0x140
kernel: ret_from_fork+0x35/0x40
kernel: INFO: task kworker/u8:4:439 blocked for more than 120 seconds.
kernel: Tainted: G OE 5.3.5-050305-generic #201910071830
kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kernel: kworker/u8:4 D 0 439 2 0x80004000
kernel: Workqueue: nvme-wq nvme_scan_work [nvme_core]
kernel: Call Trace:
kernel: __schedule+0x2b9/0x6c0
kernel: schedule+0x42/0xb0
kernel: io_schedule+0x16/0x40
kernel: do_read_cache_page+0x438/0x830
kernel: read_cache_page+0x12/0x20
kernel: read_dev_sector+0x27/0xc0
kernel: read_lba+0xc1/0x220
kernel: efi_partition+0x1e6/0x708
kernel: check_partition+0x154/0x244
kernel: rescan_partitions+0xae/0x280
kernel: __blkdev_get+0x40f/0x560
kernel: blkdev_get+0x3d/0x140
kernel: __device_add_disk+0x388/0x480
kernel: device_add_disk+0x13/0x20
kernel: nvme_mpath_set_live+0x119/0x140 [nvme_core]
kernel: nvme_update_ns_ana_state+0x5c/0x60 [nvme_core]
kernel: nvme_mpath_add_disk+0xbe/0x100 [nvme_core]
kernel: nvme_validate_ns+0x396/0x940 [nvme_core]
kernel: nvme_scan_work+0x256/0x390 [nvme_core]
kernel: process_one_work+0x1db/0x380
kernel: worker_thread+0x4d/0x400
kernel: kthread+0x104/0x140
kernel: ret_from_fork+0x35/0x40
Fixes: 0d0b660f21 ("nvme: add ANA support")
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Right now ns->head->lock is protecting namespace mutation
which is wrong and unneeded. Move it to only protect
against head mutations. While we're at it, remove unnecessary
ns->head reference as we already have head pointer.
The problem with this is that the head->lock spans
mpath disk node I/O that may block under some conditions (if
for example the controller is disconnecting or the path
became inaccessible), The locking scheme does not allow any
other path to enable itself, preventing blocked I/O to complete
and forward-progress from there.
This is a preparation patch for the fix in a subsequent patch
where the disk I/O will also be done outside the head->lock.
Fixes: 0d0b660f21 ("nvme: add ANA support")
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When scan_work calls nvme_mpath_add_disk() this holds ana_lock
and invokes nvme_parse_ana_log(), which may issue IO
in device_add_disk() and hang waiting for an accessible path.
While nvme_mpath_set_live() only called when nvme_state_is_live(),
a transition may cause NVME_SC_ANA_TRANSITION and requeue the IO.
In order to recover and complete the IO ana_work on the same ctrl
should be able to update the path state and remove NVME_NS_ANA_PENDING.
The deadlock occurs because scan_work keeps holding ana_lock,
so ana_work hangs [1].
Fix:
Now nvme_mpath_add_disk() uses nvme_parse_ana_log() to obtain a copy
of the ANA group desc, and then calls nvme_update_ns_ana_state() without
holding ana_lock.
[1]:
kernel: Workqueue: nvme-wq nvme_scan_work [nvme_core]
kernel: Call Trace:
kernel: __schedule+0x2b9/0x6c0
kernel: schedule+0x42/0xb0
kernel: io_schedule+0x16/0x40
kernel: do_read_cache_page+0x438/0x830
kernel: read_cache_page+0x12/0x20
kernel: read_dev_sector+0x27/0xc0
kernel: read_lba+0xc1/0x220
kernel: efi_partition+0x1e6/0x708
kernel: check_partition+0x154/0x244
kernel: rescan_partitions+0xae/0x280
kernel: __blkdev_get+0x40f/0x560
kernel: blkdev_get+0x3d/0x140
kernel: __device_add_disk+0x388/0x480
kernel: device_add_disk+0x13/0x20
kernel: nvme_mpath_set_live+0x119/0x140 [nvme_core]
kernel: nvme_update_ns_ana_state+0x5c/0x60 [nvme_core]
kernel: nvme_set_ns_ana_state+0x1e/0x30 [nvme_core]
kernel: nvme_parse_ana_log+0xa1/0x180 [nvme_core]
kernel: nvme_mpath_add_disk+0x47/0x90 [nvme_core]
kernel: nvme_validate_ns+0x396/0x940 [nvme_core]
kernel: nvme_scan_work+0x24f/0x380 [nvme_core]
kernel: process_one_work+0x1db/0x380
kernel: worker_thread+0x249/0x400
kernel: kthread+0x104/0x140
kernel: Workqueue: nvme-wq nvme_ana_work [nvme_core]
kernel: Call Trace:
kernel: __schedule+0x2b9/0x6c0
kernel: schedule+0x42/0xb0
kernel: schedule_preempt_disabled+0xe/0x10
kernel: __mutex_lock.isra.0+0x182/0x4f0
kernel: ? __switch_to_asm+0x34/0x70
kernel: ? select_task_rq_fair+0x1aa/0x5c0
kernel: ? kvm_sched_clock_read+0x11/0x20
kernel: ? sched_clock+0x9/0x10
kernel: __mutex_lock_slowpath+0x13/0x20
kernel: mutex_lock+0x2e/0x40
kernel: nvme_read_ana_log+0x3a/0x100 [nvme_core]
kernel: nvme_ana_work+0x15/0x20 [nvme_core]
kernel: process_one_work+0x1db/0x380
kernel: worker_thread+0x4d/0x400
kernel: kthread+0x104/0x140
kernel: ? process_one_work+0x380/0x380
kernel: ? kthread_park+0x80/0x80
kernel: ret_from_fork+0x35/0x40
Fixes: 0d0b660f21 ("nvme: add ANA support")
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Improve code readability by defining the specification's constants that
the driver is using when decoding identification payloads.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Bart van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
nvme-multipath already uses the gendisk private data, not need to
also set up the request_queue queuedata and use it in one place only.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The queues' backing device info capabilities don't change with each
namespace revalidation. Set it only when each path's request_queue
is initially added to a multipath queue.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The deadlock combines 4 flows in parallel:
- ns scanning (triggered from reconnect)
- request timeout
- ANA update (triggered from reconnect)
- I/O coming into the mpath device
(1) ns scanning triggers disk revalidation -> update disk info ->
freeze queue -> but blocked, due to (2)
(2) timeout handler reference the g_usage_counter - > but blocks in
the transport .timeout() handler, due to (3)
(3) the transport timeout handler (indirectly) calls nvme_stop_queue() ->
which takes the (down_read) namespaces_rwsem - > but blocks, due to (4)
(4) ANA update takes the (down_write) namespaces_rwsem -> calls
nvme_mpath_set_live() -> which synchronize the ns_head srcu
(see commit 504db087aa) -> but blocks, due to (5)
(5) I/O came into nvme_mpath_make_request -> took srcu_read_lock ->
direct_make_request > blk_queue_enter -> but blocked, due to (1)
==> the request queue is under freeze -> deadlock.
The fix is making ANA update take a read lock as the namespaces list
is not manipulated, it is just the ns and ns->head that are being
updated (which is protected with the ns->head lock).
Fixes: 0d0b660f21 ("nvme: add ANA support")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Hannes Reinecke