[WHY]
This workaround resolves underflow caused by incorrect DST_Y_PREFETCH.
Overriding to 192KB DET buf size until the DST_Y_PREFETCH calc is fixed.
Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Adding a function to read PSR capabilities
and ALPM capabilities.
Also adding a helper function to validate if
the sink and the driver support PSR SU.
[how]
- isolated all PSR and ALPM reading calls to a separate funciton
- set all required PSR caps
- added a helper function to check if PSR SU is supported by sink
and the driver
Reviewed-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current error log of dummy irq service doesn't have
src/ext ID info in the log.
[How]
Add src/ext ID in ack/set of dummy irq service.
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
In order to know the intermediate link rates supported by the eDP
panel and test to select the optimized link rate to save power,
create a new debugfs entry "ilr_setting" for
setting ILR.
Reviewed-by: Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
SMU now respects the PHY refclk disable request from driver.
This causes a hang during hotplug when PHY refclk was disabled
because it's not being re-enabled and the transmitter control
starts on dc_link_detect.
[How]
We normally would re-enable the clk with exit_optimized_pwr_state
but this is only set on DCN21 and DCN301. Set it for dcn31 as well.
This fixes DMCUB timeouts in the PHY.
Fixes: 64b1d0e8d5 ("drm/amd/display: Add DCN3.1 HWSEQ")
Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
return value form directly instead of
taking this in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cm>
Signed-off-by: chiminghao <chi.minghao@zte.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This starts to make the formated index much more manageable to the reader.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Yann Dirson <ydirson@free.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update smu_v13 to match smu_v12 and smu_v11 behavior where this is
fetched from debugfs rather than in kernel logs on every boot.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This value does not get cached into adev->pm.fw_version during
startup for smu13 like it does for other SMU like smu12.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This turns previously global functions into static, thus removing
compile-time warnings such as:
warning: no previous prototype for 'get_highest_allowed_voltage_level'
[-Wmissing-prototypes]
742 | unsigned int get_highest_allowed_voltage_level(uint32_t chip_family, uint32_t hw_internal_rev, uint32_t pci_revision_id)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
warning: no previous prototype for 'rv1_vbios_smu_send_msg_with_param'
[-Wmissing-prototypes]
102 | int rv1_vbios_smu_send_msg_with_param(struct clk_mgr_internal *clk_mgr, unsigned int msg_id, unsigned int param)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Changes since v1:
- As suggested by Rodrigo Siqueira:
1. Rewrite function signatures to make them more readable.
2. Get rid of unused functions in order to remove 'defined but not
used' warnings.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Isabella Basso <isabbasso@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the struct display_mode_lib pointer instead of passing lots of large
arrays as parameters by value.
Addresses this warning (resulting in failure to build a RHEL debug kernel
with Werror enabled):
../drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/display_mode_vba_31.c: In function ‘UseMinimumDCFCLK’:
../drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/display_mode_vba_31.c:7478:1: warning: the frame size of 2128 bytes is larger than 2048 bytes [-Wframe-larger-than=]
NOTE: AFAICT this function previously had no observable effect, since it
only modified parameters passed by value and doesn't return anything.
Now it may modify some values in struct display_mode_lib passed in by
reference.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move code using the Pipe struct to a new helper function.
Works around[0] this warning (resulting in failure to build a RHEL debug
kernel with Werror enabled):
../drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/display_mode_vba_31.c: In function ‘dml31_ModeSupportAndSystemConfigurationFull’:
../drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/display_mode_vba_31.c:5740:1: warning: the frame size of 2144 bytes is larger than 2048 bytes [-Wframe-larger-than=]
The culprit seems to be the Pipe struct, so pull the relevant block out
into its own sub-function. (This is porting
commit a62427ef9b ("drm/amd/display: Reduce stack size for dml21_ModeSupportAndSystemConfigurationFull")
from dml31 to dml21)
[0] AFAICT this doesn't actually reduce the total amount of stack which
can be used, just moves some of it from
dml31_ModeSupportAndSystemConfigurationFull to the new helper function,
so the former happens to no longer exceed the limit for a single
function.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the warning below:
warning: Cannot understand * \file amdgpu_ioc32.c
on line 2 - I thought it was a doc line
Changes since v1:
- As suggested by Alexander Deucher:
1. Reduce diff to minimum as this DOC section doesn't provide much
value.
Signed-off-by: Isabella Basso <isabbasso@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes the warnings below, and also drops the display_count
variable, as it's unused.
In function 'svm_range_map_to_gpu':
warning: variable 'bo_va' set but not used [-Wunused-but-set-variable]
1172 | struct amdgpu_bo_va bo_va;
| ^~~~~
...
In function 'dcn201_update_clocks':
warning: variable 'enter_display_off' set but not used [-Wunused-but-set-variable]
132 | bool enter_display_off = false;
| ^~~~~~~~~~~~~~~~~
Changes since v1:
- As suggested by Rodrigo Siqueira:
1. Drop display_count variable.
- As suggested by Felix Kuehling:
1. Remove block surrounding amdgpu_xgmi_same_hive.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Isabella Basso <isabbasso@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit fixes the compile-time warning below:
warning: no previous prototype for ‘amdgpu_ras_mca_query_error_status’
[-Wmissing-prototypes]
Changes since v1:
- As suggested by Alexander Deucher:
1. Make function static instead of adding prototype.
Signed-off-by: Isabella Basso <isabbasso@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
`edp_stream` is only used when backend is enabled on eDP, don't
declare the variable outside that scope.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are a few places that this isn't checked that could potentially
be a NULL pointer access.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For userptr bo, if adev is not in IOMMU isolation mode, RAM direct map
to GPU, multiple GPUs use same system memory dma mapping address, they
can share the original mem->bo in attachment to reduce dma address array
memory usage.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If host and amdgpu IOMMU is not enabled or IOMMU is pass through mode,
set adev->ram_is_direct_mapped flag which will be used to optimize
memory usage for multi GPU mappings.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the DC driver, we have multiple acronyms that are not obvious most of
the time; the same idea is valid for amdgpu. This commit introduces a DC
and amdgpu glossary in order to make it easier to navigate through our
driver.
Changes since V3:
- Yann: Add new acronyms to amdgpu glossary
- Daniel: Add link between dc and amdgpu glossary
Changes since V2:
- Add MMHUB
Changes since V1:
- Yann: Divide glossary based on driver context.
- Alex: Make terms more consistent and update CPLIB
- Add new acronyms to the glossary
Reviewed-by: Yann Dirson <ydirson@free.fr>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit describes how DCN works by providing high-level diagrams
with an explanation of each component. In particular, it details the
Global Sync signals.
Change since V2:
- Add a comment about MMHUBBUB.
Reviewed-by: Yann Dirson <ydirson@free.fr>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Introduce how to collect DTN log from debugfs.
Reviewed-by: Yann Dirson <ydirson@free.fr>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Display core provides a feature that makes it easy for users to debug
Pipe Split. This commit introduces how to use such a debug option.
Reviewed-by: Yann Dirson <ydirson@free.fr>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Display core provides a feature that makes it easy for users to debug
Multiple planes by enabling a visual notification at the bottom of each
plane. This commit introduces how to use such a feature.
Reviewed-by: Yann Dirson <ydirson@free.fr>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Display core documentation is not well organized, and it is hard to find
information due to the lack of sections. This commit reorganizes the
documentation layout, and it is preparation work for future changes.
Changes since V1:
- Christian: Group amdgpu documentation together.
- Daniel: Drop redundant amdgpu prefix.
- Jani: Create index pages.
- Yann: Mirror display folder in the documentation.
Reviewed-by: Yann Dirson <ydirson@free.fr>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SMU firmware expects the driver maintains error context
and doesn't interact with SMU any more when SMU errors
occurred. That will aid in debugging SMU firmware issues.
Add SMU debug option support for this request, it can be
enabled or disabled via amdgpu_smu_debug debugfs file.
Use a 32-bit mask to indicate corresponding debug modes.
Currently, only one mode(HALT_ON_ERROR) is supported.
When enabled, it brings hardware to a kind of halt state
so that no one can touch it any more in the envent of SMU
errors.
The dirver interacts with SMU via sending messages. And
threre are three ways to sending messages to SMU in current
implementation. Handle them respectively as following:
1, smu_cmn_send_smc_msg_with_param() for normal timeout cases
Halt on any error.
2, smu_cmn_send_msg_without_waiting()/smu_cmn_wait_for_response()
for longer timeout cases
Halt on errors apart from ETIME. Otherwise this way won't work.
Let the user handle ETIME error in such a case.
3, smu_cmn_send_msg_without_waiting() for no waiting cases
Halt on errors apart from ETIME. Otherwise second way won't work.
== Command Guide ==
1, enable HALT_ON_ERROR mode
# echo 0x1 > /sys/kernel/debug/dri/0/amdgpu_smu_debug
2, disable HALT_ON_ERROR mode
# echo 0x0 > /sys/kernel/debug/dri/0/amdgpu_smu_debug
v5:
- Use bit mask to allow more debug features.(Evan)
- Use WRAN() instead of BUG().(Evan)
v4:
- Set to halt state instead of a simple hang.(Christian)
v3:
- Use debugfs_create_bool().(Christian)
- Put variable into smu_context struct.
- Don't resend command when timeout.
v2:
- Resend command when timeout.(Lijo)
- Use debugfs file instead of module parameter.
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is useful to maintain error context when debugging
SW/FW issues. Introduce amdgpu_device_halt() for this
purpose. It will bring hardware to a kind of halt state,
so that no one can touch it any more.
Compare to a simple hang, the system will keep stable
at least for SSH access. Then it should be trivial to
inspect the hardware state and see what's going on.
v2:
- Set adev->no_hw_access earlier to avoid potential crashes.(Christian)
Suggested-by: Christian Koenig <christian.koenig@amd.com>
Suggested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Christian Koenig <christian.koenig@amd.co>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
in case they are not avaiable in early phase
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leave this bit as hardware default setting
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
should count on GC IP base address
Signed-off-by: Le Ma <le.ma@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
read and authenticate ip discovery binary getting from
vram first, if it is not valid, read and authenticate
the one getting from file
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To be used to check ip discovery binary signature
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add _from_vram in the funciton name to diffrentiate
the one used to read from file
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To be used when ip_discovery binary is not carried by vbios
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Guest OS will setup VCN instance 1 which is disabled as an enabled instance and
execute initialization work on it, but this causes VCN ib ring test failure
on the disabled VCN instance during modprobe:
amdgpu 0000:00:08.0: amdgpu: ring vcn_enc_1.0 uses VM inv eng 5 on hub 1
amdgpu 0000:00:08.0: [drm:amdgpu_ib_ring_tests [amdgpu]] *ERROR* IB test failed on vcn_dec_0 (-110).
amdgpu 0000:00:08.0: [drm:amdgpu_ib_ring_tests [amdgpu]] *ERROR* IB test failed on vcn_enc_0.0 (-110).
[drm:amdgpu_device_delayed_init_work_handler [amdgpu]] *ERROR* ib ring test failed (-110).
v2: drop amdgpu_discovery_get_vcn_version and rename sriov_config to
vcn_config
v3: modify VCN's revision in SR-IOV and bare-metal
Fixes: baf3f8f374 ("drm/amdgpu: handle SRIOV VCN revision parsing")
Signed-off-by: Leslie Shi <Yuliang.Shi@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix following warning in SRIOV during modprobe:
amdgpu 0000:00:08.0: GFX9+ requires FB check based on format modifier
WARNING: CPU: 0 PID: 1023 at drivers/gpu/drm/amd/amdgpu/amdgpu_display.c:1150 amdgpu_display_framebuffer_init+0x8e7/0xb40 [amdgpu]
Signed-off-by: Leslie Shi <Yuliang.Shi@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch reverts the following:
commit 48733b224f ("drm/amdkfd: add Navi2x to GWS init conditions")
Disable GWS usage in default settings for now due to FW bugs.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Initalize GWS on Navi2x with mec2_fw_version >= 0x42.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-and-tested-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We found some headaches on ASICs don't need that,
so remove that for them.
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Kevin Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, we don't find some neccesities to power on/off
SDMA in SMU hw_init/fini(). It makes more sense in SDMA
hw_init/fini().
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Kevin Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hawaii support is mostly untested these days. ROCm user mode also
depends on custom firmware for AQL packet processing, that was never
pushed upstream due to quality regressions in graphics driver testing.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If an existing SVM range overlaps an svm_range_set_attr call, we would
normally split it in order to update only the overlapping part.
However, if the attributes of the existing range would not be changed
splitting it is unnecessary.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The existing function doesn't compare the access bitmaps and flags.
This can result in failure to update those attributes in existing
ranges when all other attributes remained unchanged.
Because the access and flags attributes modify only some bits in the
respective bitmaps, we cannot compare them directly. Instead we need to
check whether applying the attributes to a particular range would
change the bitmaps.
A PREFETCH_LOC attribute must always trigger a migration, even if the
attribute value remains unchanged. E.g. if some pages were migrated due
to a CPU page fault, a prefetch must still be executed to migrate pages
back to VRAM.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add null-pointer check after the last svm_range_new call. This was
originally reported by Zhou Qingyang <zhou1615@umn.edu> based on a
static analyzer.
To avoid duplicating the unwinding code from svm_range_handle_overlap,
I merged the two functions into one.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Zhou Qingyang <zhou1615@umn.edu>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove not unique timestamp WARNING as same timestamp interrupt happens
on some chips,
Drain fault need to wait for the processed_timestamp to be truly greater
than the checkpoint or the ring to be empty to be sure no stale faults
are handled.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1818
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes the warning below by changing the prototype to a location
that's actually included by the .c files that call
amdgpu_kms_compat_ioctl:
warning: no previous prototype for ‘amdgpu_kms_compat_ioctl’
[-Wmissing-prototypes]
37 | long amdgpu_kms_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
| ^~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Isabella Basso <isabbasso@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This turns previously global functions into static, thus removing
compile-time warnings such as:
warning: no previous prototype for 'pm_set_resources_vi' [-Wmissing-prototypes]
113 | int pm_set_resources_vi(struct packet_manager *pm, uint32_t *buffer,
| ^~~~~~~~~~~~~~~~~~~
Signed-off-by: Isabella Basso <isabbasso@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This turns previously global functions into static, thus removing
compile-time warnings such as:
warning: no previous prototype for 'amdgpu_vkms_output_init' [-Wmissing-prototypes]
399 | int amdgpu_vkms_output_init(struct drm_device *dev,
| ^~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Isabella Basso <isabbasso@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes various warnings relating to erroneous docstring syntax, of
which some are listed below:
warning: Function parameter or member 'adev' not described in
'amdgpu_atomfirmware_ras_rom_addr'
...
warning: expecting prototype for amdgpu_atpx_validate_functions().
Prototype was for amdgpu_atpx_validate() instead
...
warning: Excess function parameter 'mem' description in 'amdgpu_preempt_mgr_new'
...
warning: Cannot understand * @kfd_get_cu_occupancy - Collect number of
waves in-flight on this device
...
warning: This comment starts with '/**', but isn't a kernel-doc
comment. Refer Documentation/doc-guide/kernel-doc.rst
Signed-off-by: Isabella Basso <isabbasso@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Michael Strauss