Since the subpage support of scrub, scrub_sector is in fact just
representing one sector.
Thus the name scrub_page is no longer correct, rename it to
scrub_sector.
This also involves the following renames:
- spage -> sector
Normally we would just replace "page" with "sector" and result
something like "ssector".
But the repeating 's' is not really eye friendly.
So here we just simple use "sector", as there is nothing from MM layer
called "sector" to cause any confusion.
- scrub_parity::spages -> sectors_list
Normally we use plural to indicate an array, not a list.
Rename it to @sectors_list to be more explicit on the list part.
- Also reformat and update comments that get changed
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The following will be renamed in this patch:
- scrub_block::pagev -> sectors
- scrub_block::page_count -> sector_count
- SCRUB_MAX_PAGES_PER_BLOCK -> SCRUB_MAX_SECTORS_PER_BLOCK
- page_num -> sector_num to iterate scrub_block::sectors
For now scrub_page is not yet renamed to keep the patch reasonable and
it will be updated in a followup.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During a scrub, or device replace, we can race with block group removal
and allocation and trigger the following assertion failure:
[7526.385524] assertion failed: cache->start == chunk_offset, in fs/btrfs/scrub.c:3817
[7526.387351] ------------[ cut here ]------------
[7526.387373] kernel BUG at fs/btrfs/ctree.h:3599!
[7526.388001] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI
[7526.388970] CPU: 2 PID: 1158150 Comm: btrfs Not tainted 5.17.0-rc8-btrfs-next-114 #4
[7526.390279] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[7526.392430] RIP: 0010:assertfail.constprop.0+0x18/0x1a [btrfs]
[7526.393520] Code: f3 48 c7 c7 20 (...)
[7526.396926] RSP: 0018:ffffb9154176bc40 EFLAGS: 00010246
[7526.397690] RAX: 0000000000000048 RBX: ffffa0db8a910000 RCX: 0000000000000000
[7526.398732] RDX: 0000000000000000 RSI: ffffffff9d7239a2 RDI: 00000000ffffffff
[7526.399766] RBP: ffffa0db8a911e10 R08: ffffffffa71a3ca0 R09: 0000000000000001
[7526.400793] R10: 0000000000000001 R11: 0000000000000000 R12: ffffa0db4b170800
[7526.401839] R13: 00000003494b0000 R14: ffffa0db7c55b488 R15: ffffa0db8b19a000
[7526.402874] FS: 00007f6c99c40640(0000) GS:ffffa0de6d200000(0000) knlGS:0000000000000000
[7526.404038] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[7526.405040] CR2: 00007f31b0882160 CR3: 000000014b38c004 CR4: 0000000000370ee0
[7526.406112] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[7526.407148] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[7526.408169] Call Trace:
[7526.408529] <TASK>
[7526.408839] scrub_enumerate_chunks.cold+0x11/0x79 [btrfs]
[7526.409690] ? do_wait_intr_irq+0xb0/0xb0
[7526.410276] btrfs_scrub_dev+0x226/0x620 [btrfs]
[7526.410995] ? preempt_count_add+0x49/0xa0
[7526.411592] btrfs_ioctl+0x1ab5/0x36d0 [btrfs]
[7526.412278] ? __fget_files+0xc9/0x1b0
[7526.412825] ? kvm_sched_clock_read+0x14/0x40
[7526.413459] ? lock_release+0x155/0x4a0
[7526.414022] ? __x64_sys_ioctl+0x83/0xb0
[7526.414601] __x64_sys_ioctl+0x83/0xb0
[7526.415150] do_syscall_64+0x3b/0xc0
[7526.415675] entry_SYSCALL_64_after_hwframe+0x44/0xae
[7526.416408] RIP: 0033:0x7f6c99d34397
[7526.416931] Code: 3c 1c e8 1c ff (...)
[7526.419641] RSP: 002b:00007f6c99c3fca8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[7526.420735] RAX: ffffffffffffffda RBX: 00005624e1e007b0 RCX: 00007f6c99d34397
[7526.421779] RDX: 00005624e1e007b0 RSI: 00000000c400941b RDI: 0000000000000003
[7526.422820] RBP: 0000000000000000 R08: 00007f6c99c40640 R09: 0000000000000000
[7526.423906] R10: 00007f6c99c40640 R11: 0000000000000246 R12: 00007fff746755de
[7526.424924] R13: 00007fff746755df R14: 0000000000000000 R15: 00007f6c99c40640
[7526.425950] </TASK>
That assertion is relatively new, introduced with commit d04fbe19ae
("btrfs: scrub: cleanup the argument list of scrub_chunk()").
The block group we get at scrub_enumerate_chunks() can actually have a
start address that is smaller then the chunk offset we extracted from a
device extent item we got from the commit root of the device tree.
This is very rare, but it can happen due to a race with block group
removal and allocation. For example, the following steps show how this
can happen:
1) We are at transaction T, and we have the following blocks groups,
sorted by their logical start address:
[ bg A, start address A, length 1G (data) ]
[ bg B, start address B, length 1G (data) ]
(...)
[ bg W, start address W, length 1G (data) ]
--> logical address space hole of 256M,
there used to be a 256M metadata block group here
[ bg Y, start address Y, length 256M (metadata) ]
--> Y matches W's end offset + 256M
Block group Y is the block group with the highest logical address in
the whole filesystem;
2) Block group Y is deleted and its extent mapping is removed by the call
to remove_extent_mapping() made from btrfs_remove_block_group().
So after this point, the last element of the mapping red black tree,
its rightmost node, is the mapping for block group W;
3) While still at transaction T, a new data block group is allocated,
with a length of 1G. When creating the block group we do a call to
find_next_chunk(), which returns the logical start address for the
new block group. This calls returns X, which corresponds to the
end offset of the last block group, the rightmost node in the mapping
red black tree (fs_info->mapping_tree), plus one.
So we get a new block group that starts at logical address X and with
a length of 1G. It spans over the whole logical range of the old block
group Y, that was previously removed in the same transaction.
However the device extent allocated to block group X is not the same
device extent that was used by block group Y, and it also does not
overlap that extent, which must be always the case because we allocate
extents by searching through the commit root of the device tree
(otherwise it could corrupt a filesystem after a power failure or
an unclean shutdown in general), so the extent allocator is behaving
as expected;
4) We have a task running scrub, currently at scrub_enumerate_chunks().
There it searches for device extent items in the device tree, using
its commit root. It finds a device extent item that was used by
block group Y, and it extracts the value Y from that item into the
local variable 'chunk_offset', using btrfs_dev_extent_chunk_offset();
It then calls btrfs_lookup_block_group() to find block group for
the logical address Y - since there's currently no block group that
starts at that logical address, it returns block group X, because
its range contains Y.
This results in triggering the assertion:
ASSERT(cache->start == chunk_offset);
right before calling scrub_chunk(), as cache->start is X and
chunk_offset is Y.
This is more likely to happen of filesystems not larger than 50G, because
for these filesystems we use a 256M size for metadata block groups and
a 1G size for data block groups, while for filesystems larger than 50G,
we use a 1G size for both data and metadata block groups (except for
zoned filesystems). It could also happen on any filesystem size due to
the fact that system block groups are always smaller (32M) than both
data and metadata block groups, but these are not frequently deleted, so
much less likely to trigger the race.
So make scrub skip any block group with a start offset that is less than
the value we expect, as that means it's a new block group that was created
in the current transaction. It's pointless to continue and try to scrub
its extents, because scrub searches for extents using the commit root, so
it won't find any. For a device replace, skip it as well for the same
reasons, and we don't need to worry about the possibility of extents of
the new block group not being to the new device, because we have the write
duplication setup done through btrfs_map_block().
Fixes: d04fbe19ae ("btrfs: scrub: cleanup the argument list of scrub_chunk()")
CC: stable@vger.kernel.org # 5.17
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
increment is being initialized to map->stripe_len but this is never
read as increment is overwritten later on. Remove the redundant
initialization.
Cleans up the following clang-analyzer warning:
fs/btrfs/scrub.c:3193:6: warning: Value stored to 'increment' during its
initialization is never read [clang-analyzer-deadcode.DeadStores].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The argument list of btrfs_stripe() has similar problems of
scrub_chunk():
- Duplicated and ambiguous @base argument
Can be fetched from btrfs_block_group::bg.
- Ambiguous argument @length
It's again device extent length
- Ambiguous argument @num
The instinctive guess would be mirror number, but in fact it's stripe
index.
Fix it by:
- Remove @base parameter
- Rename @length to @dev_extent_len
- Rename @num to @stripe_index
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The argument list of scrub_chunk() has the following problems:
- Duplicated @chunk_offset
It is the same as btrfs_block_group::start.
- Confusing @length
The most instinctive guess is chunk length, and one may want to delete
it, but the truth is, it's the device extent length.
Fix this by:
- Remove @chunk_offset
Use btrfs_block_group::start instead.
- Rename @length to @dev_extent_len
Also rename the caller to remove the ambiguous naming.
- Rename @cache to @bg
The "_cache" suffix for btrfs_block_group has been removed for a while.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently there is only one user for btrfs metadata readahead, and
that's scrub.
But even for the single user, it's not providing the correct
functionality it needs, as scrub needs reada for commit root, which
current readahead can't provide. (Although it's pretty easy to add such
feature).
Despite this, there are some extra problems related to metadata
readahead:
- Duplicated feature with btrfs_path::reada
- Partly duplicated feature of btrfs_fs_info::buffer_radix
Btrfs already caches its metadata in buffer_radix, while readahead
tries to read the tree block no matter if it's already cached.
- Poor layer separation
Metadata readahead works kinda at device level.
This is definitely not the correct layer it should be, since metadata
is at btrfs logical address space, it should not bother device at all.
This brings extra chance for bugs to sneak in, while brings
unnecessary complexity.
- Dead code
In the very beginning of scrub.c we have #undef DEBUG, rendering all
the debug related code useless and unable to test.
Thus here I purpose to remove the metadata readahead mechanism
completely.
[BENCHMARK]
There is a full benchmark for the scrub performance difference using the
old btrfs_reada_add() and btrfs_path::reada.
For the worst case (no dirty metadata, slow HDD), there could be a 5%
performance drop for scrub.
For other cases (even SATA SSD), there is no distinguishable performance
difference.
The number is reported scrub speed, in MiB/s.
The resolution is limited by the reported duration, which only has a
resolution of 1 second.
Old New Diff
SSD 455.3 466.332 +2.42%
HDD 103.927 98.012 -5.69%
Comprehensive test methodology is in the cover letter of the patch.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For scrub, we trigger two readaheads for two trees, extent tree to get
where to scrub, and csum tree to get the data checksum.
For csum tree we already trigger readahead in
btrfs_lookup_csums_range(), by setting path->reada.
But for extent tree we don't have any path based readahead.
Add the readahead for extent tree as well, so we can later remove the
btrfs_reada_add() based readahead.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In function scrub_stripe() we allocated two btrfs_path's, one @path for
extent tree search and another @ppath for full stripe extent tree search
for RAID56.
This is totally umncessary, as the @ppath usage is completely inside
scrub_raid56_parity(), thus we can move the path allocation into
scrub_raid56_parity() completely.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Sink zone check into btrfs_repair_one_zone() so we don't need to do it
in all callers.
Also as btrfs_repair_one_zone() doesn't return a sensible error, make it
a boolean function and return false in case it got called on a non-zoned
filesystem and true on a zoned filesystem.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These two values were introduced in commit ff023aac31 ("Btrfs: add code
to scrub to copy read data to another disk") as an optimization.
But the truth is, block layer scheduler can do whatever it wants to
merge/split bios to improve performance.
Doing such "optimization" is not really going to affect much, especially
considering how good current block layer optimizations are doing.
Remove such old and immature optimization from our code.
Since we're here, also change BUG_ON()s using these two macros to use
ASSERT()s.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use BTRFS_MAX_METADATA_BLOCKSIZE and SZ_4K (minimal sectorsize) to
calculate this value.
And remove one stale comment on the value, in fact with recent subpage
support, BTRFS_MAX_METADATA_BLOCKSIZE * PAGE_SIZE is already beyond
BTRFS_STRIPE_LEN, just we don't use the full page.
Also since we're here, update the BUG_ON() related to
SCRUB_MAX_PAGES_PER_BLOCK to ASSERT().
As those ASSERT() are really only for developers to catch early obvious
bugs, not to let end users suffer.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We are going to have multiple csum roots in the future, so convert all
users of ->csum_root to btrfs_csum_root() and rename ->csum_root to
->_csum_root so we can easily find remaining users in the future.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When we start having multiple extent roots we'll need to use a helper to
get to the correct extent_root. Rename fs_info->extent_root to
_extent_root and convert all of the users of the extent root to using
the btrfs_extent_root() helper. This will allow us to easily clean up
the remaining direct accesses in the future.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that all call sites are using the slot number to modify item values,
rename the SETGET helpers to raw_item_*(), and then rework the _nr()
helpers to be the btrfs_item_*() btrfs_set_item_*() helpers, and then
rename all of the callers to the new helpers.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The bitfields have_csum and io_error are currently signed which is not
recommended as the representation is an implementation defined
behaviour. Fix this by making the bit-fields unsigned ints.
Fixes: 2c36395430 ("btrfs: scrub: remove the anonymous structure from scrub_page")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have a lot of device lookup functions that all do something slightly
different. Clean this up by adding a struct to hold the different
lookup criteria, and then pass this around to btrfs_find_device() so it
can do the proper matching based on the lookup criteria.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have a few flags that are inconsistently used to describe the fs in
different states of failure. As of 5963ffcaf3 ("btrfs: always abort
the transaction if we abort a trans handle") we will always set
BTRFS_FS_STATE_ERROR if we abort, so we don't have to check both ABORTED
and ERROR to see if things have gone wrong. Add a helper to check
BTRFS_FS_STATE_ERROR and then convert all checkers of FS_STATE_ERROR to
use the helper.
The TRANS_ABORTED bit check was added in af72273381 ("Btrfs: clean up
resources during umount after trans is aborted") but is not actually
specific.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We can grab fs_info reliably from btrfs_raid_bio::bioc, as the bioc is
always passed into alloc_rbio(), and only get released when the raid bio
is released.
Remove btrfs_raid_bio::fs_info member, and cleanup all the @fs_info
parameters for alloc_rbio() callers.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Previously we had "struct btrfs_bio", which records IO context for
mirrored IO and RAID56, and "strcut btrfs_io_bio", which records extra
btrfs specific info for logical bytenr bio.
With "btrfs_bio" renamed to "btrfs_io_context", we are safe to rename
"btrfs_io_bio" to "btrfs_bio" which is a more suitable name now.
The struct btrfs_bio changes meaning by this commit. There was a
suggested name like btrfs_logical_bio but it's a bit long and we'd
prefer to use a shorter name.
This could be a concern for backports to older kernels where the
different meaning could possibly cause confusion or bugs. Comparing the
new and old structures, there's no overlap among the struct members so a
build would break in case of incorrect backport.
We haven't had many backports to bio code anyway so this is more of a
theoretical cause of bugs and a matter of precaution but we'll need to
keep the semantic change in mind.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The helper btrfs_bio_alloc() is almost the same as btrfs_io_bio_alloc(),
except it's allocating using BIO_MAX_VECS as @nr_iovecs, and initializes
bio->bi_iter.bi_sector.
However the naming itself is not using "btrfs_io_bio" to indicate its
parameter is "strcut btrfs_io_bio" and can be easily confused with
"struct btrfs_bio".
Considering assigned bio->bi_iter.bi_sector is such a simple work and
there are already tons of call sites doing that manually, there is no
need to do that in a helper.
Remove btrfs_bio_alloc() helper, and enhance btrfs_io_bio_alloc()
function to provide a fail-safe value for its @nr_iovecs.
And then replace all btrfs_bio_alloc() callers with
btrfs_io_bio_alloc().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The structure btrfs_bio is used by two different sites:
- bio->bi_private for mirror based profiles
For those profiles (SINGLE/DUP/RAID1*/RAID10), this structures records
how many mirrors are still pending, and save the original endio
function of the bio.
- RAID56 code
In that case, RAID56 only utilize the stripes info, and no long uses
that to trace the pending mirrors.
So btrfs_bio is not always bind to a bio, and contains more info for IO
context, thus renaming it will make the naming less confusing.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
For the following file layout, scrub will not be able to repair all
these two repairable error, but in fact make one corruption even
unrepairable:
inode offset 0 4k 8K
Mirror 1 |XXXXXX| |
Mirror 2 | |XXXXXX|
[CAUSE]
The root cause is the hard coded PAGE_SIZE, which makes scrub repair to
go crazy for subpage.
For above case, when reading the first sector, we use PAGE_SIZE other
than sectorsize to read, which makes us to read the full range [0, 64K).
In fact, after 8K there may be no data at all, we can just get some
garbage.
Then when doing the repair, we also writeback a full page from mirror 2,
this means, we will also writeback the corrupted data in mirror 2 back
to mirror 1, leaving the range [4K, 8K) unrepairable.
[FIX]
This patch will modify the following PAGE_SIZE use with sectorsize:
- scrub_print_warning_inode()
Remove the min() and replace PAGE_SIZE with sectorsize.
The min() makes no sense, as csum is done for the full sector with
padding.
This fixes a bug that subpage report extra length like:
checksum error at logical 298844160 on dev /dev/mapper/arm_nvme-test,
physical 575668224, root 5, inode 257, offset 0, length 12288, links 1 (path: file)
Where the error is only 1 sector.
- scrub_handle_errored_block()
Comments with PAGE|page involved, all changed to sector.
- scrub_setup_recheck_block()
- scrub_repair_page_from_good_copy()
- scrub_add_page_to_wr_bio()
- scrub_wr_submit()
- scrub_add_page_to_rd_bio()
- scrub_block_complete()
Replace PAGE_SIZE with sectorsize.
This solves several problems where we read/write extra range for
subpage case.
RAID56 code is excluded intentionally, as RAID56 has extra PAGE_SIZE
usage, and is not really safe enough.
Thus we will reject RAID56 for subpage in later commit.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are common values set for the stripe constraints, some of them
are already factored out. Do that for increment and mirror_num as well.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add sysfs interface to limit io during scrub. We relied on the ionice
interface to do that, eg. the idle class let the system usable while
scrub was running. This has changed when mq-deadline got widespread and
did not implement the scheduling classes. That was a CFQ thing that got
deleted. We've got numerous complaints from users about degraded
performance.
Currently only BFQ supports that but it's not a common scheduler and we
can't ask everybody to switch to it.
Alternatively the cgroup io limiting can be used but that also a
non-trivial setup (v2 required, the controller must be enabled on the
system). This can still be used if desired.
Other ideas that have been explored: piggy-back on ionice (that is set
per-process and is accessible) and interpret the class and classdata as
bandwidth limits, but this does not have enough flexibility as there are
only 8 allowed and we'd have to map fixed limits to each value. Also
adjusting the value would need to lookup the process that currently runs
scrub on the given device, and the value is not sticky so would have to
be adjusted each time scrub runs.
Running out of options, sysfs does not look that bad:
- it's accessible from scripts, or udev rules
- the name is similar to what MD-RAID has
(/proc/sys/dev/raid/speed_limit_max or /sys/block/mdX/md/sync_speed_max)
- the value is sticky at least for filesystem mount time
- adjusting the value has immediate effect
- sysfs is available in constrained environments (eg. system rescue)
- the limit also applies to device replace
Sysfs:
- raw value is in bytes
- values written to the file accept suffixes like K, M
- file is in the per-device directory /sys/fs/btrfs/FSID/devinfo/DEVID/scrub_speed_max
- 0 means use default priority of IO
The scheduler is a simple deadline one and the accuracy is up to nearest
128K.
Signed-off-by: David Sterba <dsterba@suse.com>
When doing a device replace on a zoned filesystem, if we find a block
group with ->to_copy == 0, we jump to the label 'done', which will result
in later calling btrfs_unfreeze_block_group(), even though at this point
we never called btrfs_freeze_block_group().
Since at this point we have neither turned the block group to RO mode nor
made any progress, we don't need to jump to the label 'done'. So fix this
by jumping instead to the label 'skip' and dropping our reference on the
block group before the jump.
Fixes: 78ce9fc269 ("btrfs: zoned: mark block groups to copy for device-replace")
CC: stable@vger.kernel.org # 5.12
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Drop function declarations at the beginning of the file scrub.c. These
functions are defined before they are used in the same file and don't
need forward declaration.
No functional changes.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=qHyO
-----END PGP SIGNATURE-----
Merge tag 'block-5.12-2021-03-12-v2' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Mostly just random fixes all over the map.
The only odd-one-out change is finally getting the rename of
BIO_MAX_PAGES to BIO_MAX_VECS done. This should've been done with the
multipage bvec change, but it's been left.
Do it now to avoid hassles around changes piling up for the next merge
window.
Summary:
- NVMe pull request:
- one more quirk (Dmitry Monakhov)
- fix max_zone_append_sectors initialization (Chaitanya Kulkarni)
- nvme-fc reset/create race fix (James Smart)
- fix status code on aborts/resets (Hannes Reinecke)
- fix the CSS check for ZNS namespaces (Chaitanya Kulkarni)
- fix a use after free in a debug printk in nvme-rdma (Lv Yunlong)
- Follow-up NVMe error fix for NULL 'id' (Christoph)
- Fixup for the bd_size_lock being IRQ safe, now that the offending
driver has been dropped (Damien).
- rsxx probe failure error return (Jia-Ju)
- umem probe failure error return (Wei)
- s390/dasd unbind fixes (Stefan)
- blk-cgroup stats summing fix (Xunlei)
- zone reset handling fix (Damien)
- Rename BIO_MAX_PAGES to BIO_MAX_VECS (Christoph)
- Suppress uevent trigger for hidden devices (Daniel)
- Fix handling of discard on busy device (Jan)
- Fix stale cache issue with zone reset (Shin'ichiro)"
* tag 'block-5.12-2021-03-12-v2' of git://git.kernel.dk/linux-block:
nvme: fix the nsid value to print in nvme_validate_or_alloc_ns
block: Discard page cache of zone reset target range
block: Suppress uevent for hidden device when removed
block: rename BIO_MAX_PAGES to BIO_MAX_VECS
nvme-pci: add the DISABLE_WRITE_ZEROES quirk for a Samsung PM1725a
nvme-rdma: Fix a use after free in nvmet_rdma_write_data_done
nvme-core: check ctrl css before setting up zns
nvme-fc: fix racing controller reset and create association
nvme-fc: return NVME_SC_HOST_ABORTED_CMD when a command has been aborted
nvme-fc: set NVME_REQ_CANCELLED in nvme_fc_terminate_exchange()
nvme: add NVME_REQ_CANCELLED flag in nvme_cancel_request()
nvme: simplify error logic in nvme_validate_ns()
nvme: set max_zone_append_sectors nvme_revalidate_zones
block: rsxx: fix error return code of rsxx_pci_probe()
block: Fix REQ_OP_ZONE_RESET_ALL handling
umem: fix error return code in mm_pci_probe()
blk-cgroup: Fix the recursive blkg rwstat
s390/dasd: fix hanging IO request during DASD driver unbind
s390/dasd: fix hanging DASD driver unbind
block: Try to handle busy underlying device on discard
Ever since the addition of multipage bio_vecs BIO_MAX_PAGES has been
horribly confusingly misnamed. Rename it to BIO_MAX_VECS to stop
confusing users of the bio API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210311110137.1132391-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=QJEy
-----END PGP SIGNATURE-----
Merge tag 'for-5.12-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"This is the first batch of fixes that usually arrive during the merge
window code freeze. Regressions and stable material.
Regressions:
- fix deadlock in log sync in zoned mode
- fix bugs in subpage mode still wrongly assuming sectorsize == page
size
Fixes:
- fix missing kunmap of the Q stripe in RAID6
- block group fixes:
- fix race between extent freeing/allocation when using bitmaps
- avoid double put of block group when emptying cluster
- swapfile fixes:
- fix swapfile writes vs running scrub
- fix swapfile activation vs snapshot creation
- fix stale data exposure after cloning a hole with NO_HOLES enabled
- remove tree-checker check that does not work in case information
from other leaves is necessary"
* tag 'for-5.12-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zoned: fix deadlock on log sync
btrfs: avoid double put of block group when emptying cluster
btrfs: fix stale data exposure after cloning a hole with NO_HOLES enabled
btrfs: tree-checker: do not error out if extent ref hash doesn't match
btrfs: fix race between swap file activation and snapshot creation
btrfs: fix race between writes to swap files and scrub
btrfs: avoid checking for RO block group twice during nocow writeback
btrfs: fix race between extent freeing/allocation when using bitmaps
btrfs: make check_compressed_csum() to be subpage compatible
btrfs: make btrfs_submit_compressed_read() subpage compatible
btrfs: fix raid6 qstripe kmap
When we active a swap file, at btrfs_swap_activate(), we acquire the
exclusive operation lock to prevent the physical location of the swap
file extents to be changed by operations such as balance and device
replace/resize/remove. We also call there can_nocow_extent() which,
among other things, checks if the block group of a swap file extent is
currently RO, and if it is we can not use the extent, since a write
into it would result in COWing the extent.
However we have no protection against a scrub operation running after we
activate the swap file, which can result in the swap file extents to be
COWed while the scrub is running and operating on the respective block
group, because scrub turns a block group into RO before it processes it
and then back again to RW mode after processing it. That means an attempt
to write into a swap file extent while scrub is processing the respective
block group, will result in COWing the extent, changing its physical
location on disk.
Fix this by making sure that block groups that have extents that are used
by active swap files can not be turned into RO mode, therefore making it
not possible for a scrub to turn them into RO mode. When a scrub finds a
block group that can not be turned to RO due to the existence of extents
used by swap files, it proceeds to the next block group and logs a warning
message that mentions the block group was skipped due to active swap
files - this is the same approach we currently use for balance.
Fixes: ed46ff3d42 ("Btrfs: support swap files")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=os1E
-----END PGP SIGNATURE-----
Merge tag 'for-5.12/block-2021-02-17' of git://git.kernel.dk/linux-block
Pull core block updates from Jens Axboe:
"Another nice round of removing more code than what is added, mostly
due to Christoph's relentless pursuit of tech debt removal/cleanups.
This pull request contains:
- Two series of BFQ improvements (Paolo, Jan, Jia)
- Block iov_iter improvements (Pavel)
- bsg error path fix (Pan)
- blk-mq scheduler improvements (Jan)
- -EBUSY discard fix (Jan)
- bvec allocation improvements (Ming, Christoph)
- bio allocation and init improvements (Christoph)
- Store bdev pointer in bio instead of gendisk + partno (Christoph)
- Block trace point cleanups (Christoph)
- hard read-only vs read-only split (Christoph)
- Block based swap cleanups (Christoph)
- Zoned write granularity support (Damien)
- Various fixes/tweaks (Chunguang, Guoqing, Lei, Lukas, Huhai)"
* tag 'for-5.12/block-2021-02-17' of git://git.kernel.dk/linux-block: (104 commits)
mm: simplify swapdev_block
sd_zbc: clear zone resources for non-zoned case
block: introduce blk_queue_clear_zone_settings()
zonefs: use zone write granularity as block size
block: introduce zone_write_granularity limit
block: use blk_queue_set_zoned in add_partition()
nullb: use blk_queue_set_zoned() to setup zoned devices
nvme: cleanup zone information initialization
block: document zone_append_max_bytes attribute
block: use bi_max_vecs to find the bvec pool
md/raid10: remove dead code in reshape_request
block: mark the bio as cloned in bio_iov_bvec_set
block: set BIO_NO_PAGE_REF in bio_iov_bvec_set
block: remove a layer of indentation in bio_iov_iter_get_pages
block: turn the nr_iovecs argument to bio_alloc* into an unsigned short
block: remove the 1 and 4 vec bvec_slabs entries
block: streamline bvec_alloc
block: factor out a bvec_alloc_gfp helper
block: move struct biovec_slab to bio.c
block: reuse BIO_INLINE_VECS for integrity bvecs
...
When a bad checksum is found and if the filesystem has a mirror of the
damaged data, we read the correct data from the mirror and writes it to
damaged blocks. This however, violates the sequential write constraints
of a zoned block device.
We can consider three methods to repair an IO failure in zoned filesystems:
(1) Reset and rewrite the damaged zone
(2) Allocate new device extent and replace the damaged device extent to
the new extent
(3) Relocate the corresponding block group
Method (1) is most similar to a behavior done with regular devices.
However, it also wipes non-damaged data in the same device extent, and
so it unnecessary degrades non-damaged data.
Method (2) is much like device replacing but done in the same device. It
is safe because it keeps the device extent until the replacing finish.
However, extending device replacing is non-trivial. It assumes
"src_dev->physical == dst_dev->physical". Also, the extent mapping
replacing function should be extended to support replacing device extent
position in one device.
Method (3) invokes relocation of the damaged block group and is
straightforward to implement. It relocates all the mirrored device
extents, so it potentially is a more costly operation than method (1) or
(2). But it relocates only used extents which reduce the total IO size.
Let's apply method (3) for now. In the future, we can extend device-replace
and apply method (2).
For protecting a block group gets relocated multiple time with multiple
IO errors, this commit introduces "relocating_repair" bit to show it's
now relocating to repair IO failures. Also it uses a new kthread
"btrfs-relocating-repair", not to block IO path with relocating process.
This commit also supports repairing in the scrub process.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is 4/4 patch to implement device-replace on zoned filesystems.
Even after the copying is done, the write pointers of the source device
and the destination device may not be synchronized. For example, when
the last allocated extent is freed before device-replace process, the
extent is not copied, leaving a hole there.
Synchronize the write pointers by writing zeroes to the destination
device.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is 3/4 patch to implement device-replace on zoned filesystems.
This commit implements copying. To do this, it tracks the write pointer
during the device replace process. As device-replace's copy process is
smart enough to only copy used extents on the source device, we have to
fill the gap to honor the sequential write requirement in the target
device.
The device-replace process on zoned filesystems must copy or clone all
the extents in the source device exactly once. So, we need to ensure
allocations started just before the dev-replace process to have their
corresponding extent information in the B-trees.
finish_extent_writes_for_zoned() implements that functionality, which
basically is the removed code in the commit 042528f8d8 ("Btrfs: fix
block group remaining RO forever after error during device replace").
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is the 1/4 patch to support device-replace on zoned filesystems.
We have two types of IOs during the device replace process. One is an IO
to "copy" (by the scrub functions) all the device extents from the source
device to the destination device. The other one is an IO to "clone" (by
handle_ops_on_dev_replace()) new incoming write IOs from users to the
source device into the target device.
Cloning incoming IOs can break the sequential write rule in on target
device. When a write is mapped in the middle of a block group, the IO is
directed to the middle of a target device zone, which breaks the
sequential write requirement.
However, the cloning function cannot be disabled since incoming IOs
targeting already copied device extents must be cloned so that the IO is
executed on the target device.
We cannot use dev_replace->cursor_{left,right} to determine whether a bio
is going to a not yet copied region. Since we have a time gap between
finishing btrfs_scrub_dev() and rewriting the mapping tree in
btrfs_dev_replace_finishing(), we can have a newly allocated device extent
which is never cloned nor copied.
So the point is to copy only already existing device extents. This patch
introduces mark_block_group_to_copy() to mark existing block groups as a
target of copying. Then, handle_ops_on_dev_replace() and dev-replace can
check the flag to do their job.
Also, btrfs_finish_block_group_to_copy() will check if the copied stripe
is the last stripe in the block group. With the last stripe copied,
the to_copy flag is finally disabled. Afterwards we can safely clone
incoming IOs on this block group.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Replace the gendisk pointer in struct bio with a pointer to the newly
improved struct block device. From that the gendisk can be trivially
accessed with an extra indirection, but it also allows to directly
look up all information related to partition remapping.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since btrfs scrub is utilizing its own infrastructure to submit
read/write, scrub is independent from all other routines.
This brings one very neat feature, allow us to read 4K data into offset
0 of a 64K page. So is the writeback routine.
This makes scrub on subpage sector size much easier to implement, and
thanks to previous commits which just changed the implementation to
always do scrub based on sector size, now scrub can handle subpage
filesystem without any problem.
This patch will just remove the restriction on
(sectorsize != PAGE_SIZE), to make scrub finally work on subpage
filesystems.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Btrfs scrub is more flexible than buffered data write path, as we can
read an unaligned subpage data into page offset 0.
This ability makes subpage support much easier, we just need to check
each scrub_page::page_len and ensure we only calculate hash for [0,
page_len) of a page.
There is a small thing to notice: for subpage case, we still do sector
by sector scrub. This means we will submit a read bio for each sector
to scrub, resulting in the same amount of read bios, just like on the 4K
page systems.
This behavior can be considered as a good thing, if we want everything
to be the same as 4K page systems. But this also means, we're wasting
the possibility to submit larger bio using 64K page size. This is
another problem to consider in the future.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
To support subpage tree block scrub, scrub_checksum_tree_block() only
needs to learn 2 new tricks:
- Follow sector size
Now scrub_page only represents one sector, we need to follow it
properly.
- Run checksum on all sectors
Since scrub_page only represents one sector, we need to run checksum
on all sectors, not only (nodesize >> PAGE_SIZE).
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For scrub_pages() and scrub_pages_for_parity(), we currently allocate
one scrub_page structure for one page.
This is fine if we only read/write one sector one time. But for cases
like scrubbing RAID56, we need to read/write the full stripe, which is
in 64K size for now.
For subpage size, we will submit the read in just one page, which is
normally a good thing, but for RAID56 case, it only expects to see one
sector, not the full stripe in its endio function.
This could lead to wrong parity checksum for RAID56 on subpage.
To make the existing code work well for subpage case, here we take a
shortcut by always allocating a full page for one sector.
This should provide the base to make RAID56 work for subpage case.
The cost is pretty obvious now, for one RAID56 stripe now we always need
16 pages. For support subpage situation (64K page size, 4K sector size),
this means we need full one megabyte to scrub just one RAID56 stripe.
And for data scrub, each 4K sector will also need one 64K page.
This is mostly just a workaround, the proper fix for this is a much
larger project, using scrub_block to replace scrub_page, and allow
scrub_block to handle multi pages, csums, and csum_bitmap to avoid
allocating one page for each sector.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Btrfs on-disk format chose to use u64 for almost everything, but there
are a other restrictions that won't let us use more than u32 for things
like extent length (the maximum length is 128MiB for non-hole extents),
or stripe length (we have device number limit).
This means if we don't have extra handling to convert u64 to u32, we
will always have some questionable operations like
"u32 = u64 >> sectorsize_bits" in the code.
This patch will try to address the problem by reducing the width for the
following members/parameters:
- scrub_parity::stripe_len
- @len of scrub_pages()
- @extent_len of scrub_remap_extent()
- @len of scrub_parity_mark_sectors_error()
- @len of scrub_parity_mark_sectors_data()
- @len of scrub_extent()
- @len of scrub_pages_for_parity()
- @len of scrub_extent_for_parity()
For members extracted from on-disk structure, like map->stripe_len, they
will be kept as is. Since that modification would require on-disk format
change.
There will be cases like "u32 = u64 - u64" or "u32 = u64", for such call
sites, extra ASSERT() is added to be extra safe for debug builds.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Superblock (and its copies) is the only data structure in btrfs which
has a fixed location on a device. Since we cannot overwrite in a
sequential write required zone, we cannot place superblock in the zone.
One easy solution is limiting superblock and copies to be placed only in
conventional zones. However, this method has two downsides: one is
reduced number of superblock copies. The location of the second copy of
superblock is 256GB, which is in a sequential write required zone on
typical devices in the market today. So, the number of superblock and
copies is limited to be two. Second downside is that we cannot support
devices which have no conventional zones at all.
To solve these two problems, we employ superblock log writing. It uses
two adjacent zones as a circular buffer to write updated superblocks.
Once the first zone is filled up, start writing into the second one.
Then, when both zones are filled up and before starting to write to the
first zone again, it reset the first zone.
We can determine the position of the latest superblock by reading write
pointer information from a device. One corner case is when both zones
are full. For this situation, we read out the last superblock of each
zone, and compare them to determine which zone is older.
The following zones are reserved as the circular buffer on ZONED btrfs.
- The primary superblock: zones 0 and 1
- The first copy: zones 16 and 17
- The second copy: zones 1024 or zone at 256GB which is minimum, and
next to it
If these reserved zones are conventional, superblock is written fixed at
the start of the zone without logging.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
That anonymous structure serve no special purpose, just replace it with
regular members.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 343694eee8d8 ("btrfs: switch seed device to list api"), missed to
check if the parameter seed is true in the function btrfs_find_device().
This tells it whether to traverse the seed device list or not.
After this commit, the argument is unused and can be removed.
In device_list_add() it's not necessary because fs_devices always points
to the device's fs_devices. So with the devid+uuid matching, it will
find the right device and return, thus not needing to traverse seed
devices.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Function scrub_find_csum() is to locate the csum for bytenr @logical
from sctx->csum_list.
However it lacks a lot of comments to explain things like how the
csum_list is organized and why we need to drop csum range which is
before us.
Refactor the function by:
- Add more comments explaining the behavior
- Add comment explaining why we need to drop the csum range
- Put the csum copy in the main loop
This is mostly for the incoming patches to make scrub_find_csum() able
to find multiple checksums.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The @force parameter for scrub_pages() is to indicate whether we want to
force bio submission. Currently it's only used for the super block,
and it can be easily determined by the @flags, so we can remove the
parameter.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are several call sites where we declare something like
"struct scrub_page *page".
This is confusing as we also use regular page in this code,
rename it to 'spage' where applicable.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The context structure unnecessarily stores copy of the checksum size,
that can be now easily obtained from fs_info.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>