Commit Graph

269 Commits

Author SHA1 Message Date
Linus Torvalds f5c13f1fde Driver core changes for 5.14-rc1
Here is the small set of driver core and debugfs updates for 5.14-rc1.
 
 Included in here are:
 	- debugfs api cleanups (touched some drivers)
 	- devres updates
 	- tiny driver core updates and tweaks
 
 Nothing major in here at all, and all have been in linux-next for a
 while with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYOM7jA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yloDQCfZOlLYXF+2KgXJQqevNnRiu7/B1gAn3aCX6xh
 UWVUfu5LDIXi2uFERRT1
 =Ze3R
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core changes from Greg KH:
 "Here is the small set of driver core and debugfs updates for 5.14-rc1.

  Included in here are:

   - debugfs api cleanups (touched some drivers)

   - devres updates

   - tiny driver core updates and tweaks

  Nothing major in here at all, and all have been in linux-next for a
  while with no reported issues"

* tag 'driver-core-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (27 commits)
  docs: ABI: testing: sysfs-firmware-memmap: add some memmap types.
  devres: Enable trace events
  devres: No need to call remove_nodes() when there none present
  devres: Use list_for_each_safe_from() in remove_nodes()
  devres: Make locking straight forward in release_nodes()
  kernfs: move revalidate to be near lookup
  drivers/base: Constify static attribute_group structs
  firmware_loader: remove unneeded 'comma' macro
  devcoredump: remove contact information
  driver core: Drop helper devm_platform_ioremap_resource_wc()
  component: Rename 'dev' to 'parent'
  component: Drop 'dev' argument to component_match_realloc()
  device property: Don't check for NULL twice in the loops
  driver core: auxiliary bus: Fix typo in the docs
  drivers/base/node.c: make CACHE_ATTR define static DEVICE_ATTR_RO
  debugfs: remove return value of debugfs_create_ulong()
  debugfs: remove return value of debugfs_create_bool()
  scsi: snic: debugfs: remove local storage of debugfs files
  b43: don't save dentries for debugfs
  b43legacy: don't save dentries for debugfs
  ...
2021-07-05 13:51:41 -07:00
Christoph Hellwig c1e3dbe981 fs: move ramfs_aops to libfs
Move the ramfs aops to libfs and reuse them for kernfs and configfs.
Thosw two did not wire up ->set_page_dirty before and now get
__set_page_dirty_no_writeback, which is the right one for no-writeback
address_space usage.

Drop the now unused exports of the libfs helpers only used for ramfs-style
pagecache usage.

Link: https://lkml.kernel.org/r/20210614061512.3966143-3-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 10:53:48 -07:00
Ian Kent d826e03651 kernfs: move revalidate to be near lookup
While the dentry operation kernfs_dop_revalidate() is grouped with
dentry type functions it also has a strong affinity to the inode
operation ->lookup().

It makes sense to locate this function near to kernfs_iop_lookup()
because we will be adding VFS negative dentry caching to reduce path
lookup overhead for non-existent paths.

There's no functional change from this patch.

Signed-off-by: Ian Kent <raven@themaw.net>
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://lore.kernel.org/r/162375275365.232295.8995526416263659926.stgit@web.messagingengine.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-15 17:04:32 +02:00
Linus Torvalds 7d6beb71da idmapped-mounts-v5.12
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYCegywAKCRCRxhvAZXjc
 ouJ6AQDlf+7jCQlQdeKKoN9QDFfMzG1ooemat36EpRRTONaGuAD8D9A4sUsG4+5f
 4IU5Lj9oY4DEmF8HenbWK2ZHsesL2Qg=
 =yPaw
 -----END PGP SIGNATURE-----

Merge tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux

Pull idmapped mounts from Christian Brauner:
 "This introduces idmapped mounts which has been in the making for some
  time. Simply put, different mounts can expose the same file or
  directory with different ownership. This initial implementation comes
  with ports for fat, ext4 and with Christoph's port for xfs with more
  filesystems being actively worked on by independent people and
  maintainers.

  Idmapping mounts handle a wide range of long standing use-cases. Here
  are just a few:

   - Idmapped mounts make it possible to easily share files between
     multiple users or multiple machines especially in complex
     scenarios. For example, idmapped mounts will be used in the
     implementation of portable home directories in
     systemd-homed.service(8) where they allow users to move their home
     directory to an external storage device and use it on multiple
     computers where they are assigned different uids and gids. This
     effectively makes it possible to assign random uids and gids at
     login time.

   - It is possible to share files from the host with unprivileged
     containers without having to change ownership permanently through
     chown(2).

   - It is possible to idmap a container's rootfs and without having to
     mangle every file. For example, Chromebooks use it to share the
     user's Download folder with their unprivileged containers in their
     Linux subsystem.

   - It is possible to share files between containers with
     non-overlapping idmappings.

   - Filesystem that lack a proper concept of ownership such as fat can
     use idmapped mounts to implement discretionary access (DAC)
     permission checking.

   - They allow users to efficiently changing ownership on a per-mount
     basis without having to (recursively) chown(2) all files. In
     contrast to chown (2) changing ownership of large sets of files is
     instantenous with idmapped mounts. This is especially useful when
     ownership of a whole root filesystem of a virtual machine or
     container is changed. With idmapped mounts a single syscall
     mount_setattr syscall will be sufficient to change the ownership of
     all files.

   - Idmapped mounts always take the current ownership into account as
     idmappings specify what a given uid or gid is supposed to be mapped
     to. This contrasts with the chown(2) syscall which cannot by itself
     take the current ownership of the files it changes into account. It
     simply changes the ownership to the specified uid and gid. This is
     especially problematic when recursively chown(2)ing a large set of
     files which is commong with the aforementioned portable home
     directory and container and vm scenario.

   - Idmapped mounts allow to change ownership locally, restricting it
     to specific mounts, and temporarily as the ownership changes only
     apply as long as the mount exists.

  Several userspace projects have either already put up patches and
  pull-requests for this feature or will do so should you decide to pull
  this:

   - systemd: In a wide variety of scenarios but especially right away
     in their implementation of portable home directories.

         https://systemd.io/HOME_DIRECTORY/

   - container runtimes: containerd, runC, LXD:To share data between
     host and unprivileged containers, unprivileged and privileged
     containers, etc. The pull request for idmapped mounts support in
     containerd, the default Kubernetes runtime is already up for quite
     a while now: https://github.com/containerd/containerd/pull/4734

   - The virtio-fs developers and several users have expressed interest
     in using this feature with virtual machines once virtio-fs is
     ported.

   - ChromeOS: Sharing host-directories with unprivileged containers.

  I've tightly synced with all those projects and all of those listed
  here have also expressed their need/desire for this feature on the
  mailing list. For more info on how people use this there's a bunch of
  talks about this too. Here's just two recent ones:

      https://www.cncf.io/wp-content/uploads/2020/12/Rootless-Containers-in-Gitpod.pdf
      https://fosdem.org/2021/schedule/event/containers_idmap/

  This comes with an extensive xfstests suite covering both ext4 and
  xfs:

      https://git.kernel.org/brauner/xfstests-dev/h/idmapped_mounts

  It covers truncation, creation, opening, xattrs, vfscaps, setid
  execution, setgid inheritance and more both with idmapped and
  non-idmapped mounts. It already helped to discover an unrelated xfs
  setgid inheritance bug which has since been fixed in mainline. It will
  be sent for inclusion with the xfstests project should you decide to
  merge this.

  In order to support per-mount idmappings vfsmounts are marked with
  user namespaces. The idmapping of the user namespace will be used to
  map the ids of vfs objects when they are accessed through that mount.
  By default all vfsmounts are marked with the initial user namespace.
  The initial user namespace is used to indicate that a mount is not
  idmapped. All operations behave as before and this is verified in the
  testsuite.

  Based on prior discussions we want to attach the whole user namespace
  and not just a dedicated idmapping struct. This allows us to reuse all
  the helpers that already exist for dealing with idmappings instead of
  introducing a whole new range of helpers. In addition, if we decide in
  the future that we are confident enough to enable unprivileged users
  to setup idmapped mounts the permission checking can take into account
  whether the caller is privileged in the user namespace the mount is
  currently marked with.

  The user namespace the mount will be marked with can be specified by
  passing a file descriptor refering to the user namespace as an
  argument to the new mount_setattr() syscall together with the new
  MOUNT_ATTR_IDMAP flag. The system call follows the openat2() pattern
  of extensibility.

  The following conditions must be met in order to create an idmapped
  mount:

   - The caller must currently have the CAP_SYS_ADMIN capability in the
     user namespace the underlying filesystem has been mounted in.

   - The underlying filesystem must support idmapped mounts.

   - The mount must not already be idmapped. This also implies that the
     idmapping of a mount cannot be altered once it has been idmapped.

   - The mount must be a detached/anonymous mount, i.e. it must have
     been created by calling open_tree() with the OPEN_TREE_CLONE flag
     and it must not already have been visible in the filesystem.

  The last two points guarantee easier semantics for userspace and the
  kernel and make the implementation significantly simpler.

  By default vfsmounts are marked with the initial user namespace and no
  behavioral or performance changes are observed.

  The manpage with a detailed description can be found here:

      1d7b902e28

  In order to support idmapped mounts, filesystems need to be changed
  and mark themselves with the FS_ALLOW_IDMAP flag in fs_flags. The
  patches to convert individual filesystem are not very large or
  complicated overall as can be seen from the included fat, ext4, and
  xfs ports. Patches for other filesystems are actively worked on and
  will be sent out separately. The xfstestsuite can be used to verify
  that port has been done correctly.

  The mount_setattr() syscall is motivated independent of the idmapped
  mounts patches and it's been around since July 2019. One of the most
  valuable features of the new mount api is the ability to perform
  mounts based on file descriptors only.

  Together with the lookup restrictions available in the openat2()
  RESOLVE_* flag namespace which we added in v5.6 this is the first time
  we are close to hardened and race-free (e.g. symlinks) mounting and
  path resolution.

  While userspace has started porting to the new mount api to mount
  proper filesystems and create new bind-mounts it is currently not
  possible to change mount options of an already existing bind mount in
  the new mount api since the mount_setattr() syscall is missing.

  With the addition of the mount_setattr() syscall we remove this last
  restriction and userspace can now fully port to the new mount api,
  covering every use-case the old mount api could. We also add the
  crucial ability to recursively change mount options for a whole mount
  tree, both removing and adding mount options at the same time. This
  syscall has been requested multiple times by various people and
  projects.

  There is a simple tool available at

      https://github.com/brauner/mount-idmapped

  that allows to create idmapped mounts so people can play with this
  patch series. I'll add support for the regular mount binary should you
  decide to pull this in the following weeks:

  Here's an example to a simple idmapped mount of another user's home
  directory:

	u1001@f2-vm:/$ sudo ./mount --idmap both:1000:1001:1 /home/ubuntu/ /mnt

	u1001@f2-vm:/$ ls -al /home/ubuntu/
	total 28
	drwxr-xr-x 2 ubuntu ubuntu 4096 Oct 28 22:07 .
	drwxr-xr-x 4 root   root   4096 Oct 28 04:00 ..
	-rw------- 1 ubuntu ubuntu 3154 Oct 28 22:12 .bash_history
	-rw-r--r-- 1 ubuntu ubuntu  220 Feb 25  2020 .bash_logout
	-rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25  2020 .bashrc
	-rw-r--r-- 1 ubuntu ubuntu  807 Feb 25  2020 .profile
	-rw-r--r-- 1 ubuntu ubuntu    0 Oct 16 16:11 .sudo_as_admin_successful
	-rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo

	u1001@f2-vm:/$ ls -al /mnt/
	total 28
	drwxr-xr-x  2 u1001 u1001 4096 Oct 28 22:07 .
	drwxr-xr-x 29 root  root  4096 Oct 28 22:01 ..
	-rw-------  1 u1001 u1001 3154 Oct 28 22:12 .bash_history
	-rw-r--r--  1 u1001 u1001  220 Feb 25  2020 .bash_logout
	-rw-r--r--  1 u1001 u1001 3771 Feb 25  2020 .bashrc
	-rw-r--r--  1 u1001 u1001  807 Feb 25  2020 .profile
	-rw-r--r--  1 u1001 u1001    0 Oct 16 16:11 .sudo_as_admin_successful
	-rw-------  1 u1001 u1001 1144 Oct 28 00:43 .viminfo

	u1001@f2-vm:/$ touch /mnt/my-file

	u1001@f2-vm:/$ setfacl -m u:1001:rwx /mnt/my-file

	u1001@f2-vm:/$ sudo setcap -n 1001 cap_net_raw+ep /mnt/my-file

	u1001@f2-vm:/$ ls -al /mnt/my-file
	-rw-rwxr--+ 1 u1001 u1001 0 Oct 28 22:14 /mnt/my-file

	u1001@f2-vm:/$ ls -al /home/ubuntu/my-file
	-rw-rwxr--+ 1 ubuntu ubuntu 0 Oct 28 22:14 /home/ubuntu/my-file

	u1001@f2-vm:/$ getfacl /mnt/my-file
	getfacl: Removing leading '/' from absolute path names
	# file: mnt/my-file
	# owner: u1001
	# group: u1001
	user::rw-
	user:u1001:rwx
	group::rw-
	mask::rwx
	other::r--

	u1001@f2-vm:/$ getfacl /home/ubuntu/my-file
	getfacl: Removing leading '/' from absolute path names
	# file: home/ubuntu/my-file
	# owner: ubuntu
	# group: ubuntu
	user::rw-
	user:ubuntu:rwx
	group::rw-
	mask::rwx
	other::r--"

* tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: (41 commits)
  xfs: remove the possibly unused mp variable in xfs_file_compat_ioctl
  xfs: support idmapped mounts
  ext4: support idmapped mounts
  fat: handle idmapped mounts
  tests: add mount_setattr() selftests
  fs: introduce MOUNT_ATTR_IDMAP
  fs: add mount_setattr()
  fs: add attr_flags_to_mnt_flags helper
  fs: split out functions to hold writers
  namespace: only take read lock in do_reconfigure_mnt()
  mount: make {lock,unlock}_mount_hash() static
  namespace: take lock_mount_hash() directly when changing flags
  nfs: do not export idmapped mounts
  overlayfs: do not mount on top of idmapped mounts
  ecryptfs: do not mount on top of idmapped mounts
  ima: handle idmapped mounts
  apparmor: handle idmapped mounts
  fs: make helpers idmap mount aware
  exec: handle idmapped mounts
  would_dump: handle idmapped mounts
  ...
2021-02-23 13:39:45 -08:00
Christian Brauner 549c729771
fs: make helpers idmap mount aware
Extend some inode methods with an additional user namespace argument. A
filesystem that is aware of idmapped mounts will receive the user
namespace the mount has been marked with. This can be used for
additional permission checking and also to enable filesystems to
translate between uids and gids if they need to. We have implemented all
relevant helpers in earlier patches.

As requested we simply extend the exisiting inode method instead of
introducing new ones. This is a little more code churn but it's mostly
mechanical and doesnt't leave us with additional inode methods.

Link: https://lore.kernel.org/r/20210121131959.646623-25-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-24 14:27:20 +01:00
Christian Brauner 0d56a4518d
stat: handle idmapped mounts
The generic_fillattr() helper fills in the basic attributes associated
with an inode. Enable it to handle idmapped mounts. If the inode is
accessed through an idmapped mount map it into the mount's user
namespace before we store the uid and gid. If the initial user namespace
is passed nothing changes so non-idmapped mounts will see identical
behavior as before.

Link: https://lore.kernel.org/r/20210121131959.646623-12-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-24 14:27:17 +01:00
Christian Brauner e65ce2a50c
acl: handle idmapped mounts
The posix acl permission checking helpers determine whether a caller is
privileged over an inode according to the acls associated with the
inode. Add helpers that make it possible to handle acls on idmapped
mounts.

The vfs and the filesystems targeted by this first iteration make use of
posix_acl_fix_xattr_from_user() and posix_acl_fix_xattr_to_user() to
translate basic posix access and default permissions such as the
ACL_USER and ACL_GROUP type according to the initial user namespace (or
the superblock's user namespace) to and from the caller's current user
namespace. Adapt these two helpers to handle idmapped mounts whereby we
either map from or into the mount's user namespace depending on in which
direction we're translating.
Similarly, cap_convert_nscap() is used by the vfs to translate user
namespace and non-user namespace aware filesystem capabilities from the
superblock's user namespace to the caller's user namespace. Enable it to
handle idmapped mounts by accounting for the mount's user namespace.

In addition the fileystems targeted in the first iteration of this patch
series make use of the posix_acl_chmod() and, posix_acl_update_mode()
helpers. Both helpers perform permission checks on the target inode. Let
them handle idmapped mounts. These two helpers are called when posix
acls are set by the respective filesystems to handle this case we extend
the ->set() method to take an additional user namespace argument to pass
the mount's user namespace down.

Link: https://lore.kernel.org/r/20210121131959.646623-9-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-24 14:27:17 +01:00
Christian Brauner 2f221d6f7b
attr: handle idmapped mounts
When file attributes are changed most filesystems rely on the
setattr_prepare(), setattr_copy(), and notify_change() helpers for
initialization and permission checking. Let them handle idmapped mounts.
If the inode is accessed through an idmapped mount map it into the
mount's user namespace. Afterwards the checks are identical to
non-idmapped mounts. If the initial user namespace is passed nothing
changes so non-idmapped mounts will see identical behavior as before.

Helpers that perform checks on the ia_uid and ia_gid fields in struct
iattr assume that ia_uid and ia_gid are intended values and have already
been mapped correctly at the userspace-kernelspace boundary as we
already do today. If the initial user namespace is passed nothing
changes so non-idmapped mounts will see identical behavior as before.

Link: https://lore.kernel.org/r/20210121131959.646623-8-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-24 14:27:16 +01:00
Christian Brauner 47291baa8d
namei: make permission helpers idmapped mount aware
The two helpers inode_permission() and generic_permission() are used by
the vfs to perform basic permission checking by verifying that the
caller is privileged over an inode. In order to handle idmapped mounts
we extend the two helpers with an additional user namespace argument.
On idmapped mounts the two helpers will make sure to map the inode
according to the mount's user namespace and then peform identical
permission checks to inode_permission() and generic_permission(). If the
initial user namespace is passed nothing changes so non-idmapped mounts
will see identical behavior as before.

Link: https://lore.kernel.org/r/20210121131959.646623-6-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-24 14:27:16 +01:00
Christoph Hellwig f2d6c2708b kernfs: wire up ->splice_read and ->splice_write
Wire up the splice_read and splice_write methods to the default
helpers using ->read_iter and ->write_iter now that those are
implemented for kernfs.  This restores support to use splice and
sendfile on kernfs files.

Fixes: 36e2c7421f ("fs: don't allow splice read/write without explicit ops")
Reported-by: Siddharth Gupta <sidgup@codeaurora.org>
Tested-by: Siddharth Gupta <sidgup@codeaurora.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210120204631.274206-4-hch@lst.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-21 18:30:28 +01:00
Christoph Hellwig cc099e0b39 kernfs: implement ->write_iter
Switch kernfs to implement the write_iter method instead of plain old
write to prepare to supporting splice and sendfile again.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210120204631.274206-3-hch@lst.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-21 18:30:28 +01:00
Christoph Hellwig 4eaad21a6a kernfs: implement ->read_iter
Switch kernfs to implement the read_iter method instead of plain old
read to prepare to supporting splice and sendfile again.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210120204631.274206-2-hch@lst.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-21 18:30:28 +01:00
Hui Su 0288e7fa35 fs/kernfs: remove the double check of dentry->inode
In both kernfs_node_from_dentry() and in
kernfs_dentry_node(), we will check the dentry->inode
is NULL or not, which is superfluous.

So remove the check in kernfs_node_from_dentry().

Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hui Su <sh_def@163.com>
Link: https://lore.kernel.org/r/20201113132143.GA119541@rlk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09 19:03:49 +01:00
Willem de Bruijn 21774fd81a kernfs: bring names in comments in line with code
Fix two stragglers in the comments of the below rename operation.

Fixes: adc5e8b58f ("kernfs: drop s_ prefix from kernfs_node members")
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20201015185726.1386868-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-09 18:12:39 +01:00
Amir Goldstein 40a100d3ad fsnotify: pass dir and inode arguments to fsnotify()
The arguments of fsnotify() are overloaded and mean different things
for different event types.

Replace the to_tell argument with separate arguments @dir and @inode,
because we may be sending to both dir and child.  Using the @data
argument to pass the child is not enough, because dirent events pass
this argument (for audit), but we do not report to child.

Document the new fsnotify() function argumenets.

Link: https://lore.kernel.org/r/20200722125849.17418-7-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2020-07-27 23:15:48 +02:00
Amir Goldstein 82ace1efb3 fsnotify: create helper fsnotify_inode()
Simple helper to consolidate biolerplate code.

Link: https://lore.kernel.org/r/20200722125849.17418-5-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2020-07-27 23:13:51 +02:00
Amir Goldstein 497b0c5a7c fsnotify: send event to parent and child with single callback
Instead of calling fsnotify() twice, once with parent inode and once
with child inode, if event should be sent to parent inode, send it
with both parent and child inodes marks in object type iterator and call
the backend handle_event() callback only once.

The parent inode is assigned to the standard "inode" iterator type and
the child inode is assigned to the special "child" iterator type.

In that case, the bit FS_EVENT_ON_CHILD will be set in the event mask,
the dir argument to handle_event will be the parent inode, the file_name
argument to handle_event is non NULL and refers to the name of the child
and the child inode can be accessed with fsnotify_data_inode().

This will allow fanotify to make decisions based on child or parent's
ignored mask.  For example, when a parent is interested in a specific
event on its children, but a specific child wishes to ignore this event,
the event will not be reported.  This is not what happens with current
code, but according to man page, it is the expected behavior.

Link: https://lore.kernel.org/r/20200716084230.30611-15-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2020-07-27 21:24:52 +02:00
Amir Goldstein 9991bb84b2 kernfs: do not call fsnotify() with name without a parent
When creating an FS_MODIFY event on inode itself (not on parent)
the file_name argument should be NULL.

The change to send a non NULL name to inode itself was done on purpuse
as part of another commit, as Tejun writes: "...While at it, supply the
target file name to fsnotify() from kernfs_node->name.".

But this is wrong practice and inconsistent with inotify behavior when
watching a single file.  When a child is being watched (as opposed to the
parent directory) the inotify event should contain the watch descriptor,
but not the file name.

Fixes: df6a58c5c5 ("kernfs: don't depend on d_find_any_alias()...")
Link: https://lore.kernel.org/r/20200708111156.24659-5-amir73il@gmail.com
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2020-07-15 17:36:52 +02:00
Michel Lespinasse c1e8d7c6a7 mmap locking API: convert mmap_sem comments
Convert comments that reference mmap_sem to reference mmap_lock instead.

[akpm@linux-foundation.org: fix up linux-next leftovers]
[akpm@linux-foundation.org: s/lockaphore/lock/, per Vlastimil]
[akpm@linux-foundation.org: more linux-next fixups, per Michel]

Signed-off-by: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Liam Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ying Han <yinghan@google.com>
Link: http://lkml.kernel.org/r/20200520052908.204642-13-walken@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 09:39:14 -07:00
Waiman Long 0f605db5bd kernfs: Change kernfs_node lockdep name to "kn->active"
The kernfs_node lockdep tracking is being done on kn->active, the
active reference count. The other reference count (kn->count) is not
tracked by lockdep. So change the lockdep name to reflect what it is
tracking.

Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20200402171056.27871-1-longman@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23 16:59:15 +02:00
Daniel Xu 0c47383ba3 kernfs: Add option to enable user xattrs
User extended attributes are useful as metadata storage for kernfs
consumers like cgroups. Especially in the case of cgroups, it is useful
to have a central metadata store that multiple processes/services can
use to coordinate actions.

A concrete example is for userspace out of memory killers. We want to
let delegated cgroup subtree owners (running as non-root) to be able to
say "please avoid killing this cgroup". This is especially important for
desktop linux as delegated subtrees owners are less likely to run as
root.

This patch introduces a new flag, KERNFS_ROOT_SUPPORT_USER_XATTR, that
lets kernfs consumers enable user xattr support. An initial limit of 128
entries or 128KB -- whichever is hit first -- is placed per cgroup
because xattrs come from kernel memory and we don't want to let
unprivileged users accidentally eat up too much kernel memory.

Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Acked-by: Chris Down <chris@chrisdown.name>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2020-03-16 15:53:47 -04:00
Daniel Xu a46a22955b kernfs: Add removed_size out param for simple_xattr_set
This helps set up size accounting in the next commit. Without this out
param, it's difficult to find out the removed xattr size without taking
a lock for longer and walking the xattr linked list twice.

Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Acked-by: Chris Down <chris@chrisdown.name>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2020-03-16 15:53:47 -04:00
Linus Torvalds bddea11b1b Merge branch 'imm.timestamp' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs timestamp updates from Al Viro:
 "More 64bit timestamp work"

* 'imm.timestamp' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  kernfs: don't bother with timestamp truncation
  fs: Do not overload update_time
  fs: Delete timespec64_trunc()
  fs: ubifs: Eliminate timespec64_trunc() usage
  fs: ceph: Delete timespec64_trunc() usage
  fs: cifs: Delete usage of timespec64_trunc
  fs: fat: Eliminate timespec64_trunc() usage
  utimes: Clamp the timestamps in notify_change()
2020-02-05 05:02:42 +00:00
Mateusz Nosek 5bf33f04eb fs/kernfs/dir.c: Clean code by removing always true condition
Previously there was an additional check if variable pos is not null.
However, this check happens after entering while loop and only then,
which can happen only if pos is not null.
Therefore the additional check is redundant and can be removed.

Signed-off-by: Mateusz Nosek <mateusznosek0@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20191230191628.21099-1-mateusznosek0@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14 16:14:47 +01:00
Al Viro f0f3588f7a kernfs: don't bother with timestamp truncation
kernfs users are not going to have limited
range or granularity anyway.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-12-08 19:10:57 -05:00
Linus Torvalds 0aecba6173 Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs d_inode/d_flags memory ordering fixes from Al Viro:
 "Fallout from tree-wide audit for ->d_inode/->d_flags barriers use.
  Basically, the problem is that negative pinned dentries require
  careful treatment - unless ->d_lock is locked or parent is held at
  least shared, another thread can make them positive right under us.

  Most of the uses turned out to be safe - the main surprises as far as
  filesystems are concerned were

   - race in dget_parent() fastpath, that might end up with the caller
     observing the returned dentry _negative_, due to insufficient
     barriers. It is positive in memory, but we could end up seeing the
     wrong value of ->d_inode in CPU cache. Fixed.

   - manual checks that result of lookup_one_len_unlocked() is positive
     (and rejection of negatives). Again, insufficient barriers (we
     might end up with inconsistent observed values of ->d_inode and
     ->d_flags). Fixed by switching to a new primitive that does the
     checks itself and returns ERR_PTR(-ENOENT) instead of a negative
     dentry. That way we get rid of boilerplate converting negatives
     into ERR_PTR(-ENOENT) in the callers and have a single place to
     deal with the barrier-related mess - inside fs/namei.c rather than
     in every caller out there.

  The guts of pathname resolution *do* need to be careful - the race
  found by Ritesh is real, as well as several similar races.
  Fortunately, it turns out that we can take care of that with fairly
  local changes in there.

  The tree-wide audit had not been fun, and I hate the idea of repeating
  it. I think the right approach would be to annotate the places where
  we are _not_ guaranteed ->d_inode/->d_flags stability and have sparse
  catch regressions. But I'm still not sure what would be the least
  invasive way of doing that and it's clearly the next cycle fodder"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs/namei.c: fix missing barriers when checking positivity
  fix dget_parent() fastpath race
  new helper: lookup_positive_unlocked()
  fs/namei.c: pull positivity check into follow_managed()
2019-12-06 09:06:58 -08:00
Linus Torvalds 168829ad09 Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
 "The main changes in this cycle were:

   - A comprehensive rewrite of the robust/PI futex code's exit handling
     to fix various exit races. (Thomas Gleixner et al)

   - Rework the generic REFCOUNT_FULL implementation using
     atomic_fetch_* operations so that the performance impact of the
     cmpxchg() loops is mitigated for common refcount operations.

     With these performance improvements the generic implementation of
     refcount_t should be good enough for everybody - and this got
     confirmed by performance testing, so remove ARCH_HAS_REFCOUNT and
     REFCOUNT_FULL entirely, leaving the generic implementation enabled
     unconditionally. (Will Deacon)

   - Other misc changes, fixes, cleanups"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
  lkdtm: Remove references to CONFIG_REFCOUNT_FULL
  locking/refcount: Remove unused 'refcount_error_report()' function
  locking/refcount: Consolidate implementations of refcount_t
  locking/refcount: Consolidate REFCOUNT_{MAX,SATURATED} definitions
  locking/refcount: Move saturation warnings out of line
  locking/refcount: Improve performance of generic REFCOUNT_FULL code
  locking/refcount: Move the bulk of the REFCOUNT_FULL implementation into the <linux/refcount.h> header
  locking/refcount: Remove unused refcount_*_checked() variants
  locking/refcount: Ensure integer operands are treated as signed
  locking/refcount: Define constants for saturation and max refcount values
  futex: Prevent exit livelock
  futex: Provide distinct return value when owner is exiting
  futex: Add mutex around futex exit
  futex: Provide state handling for exec() as well
  futex: Sanitize exit state handling
  futex: Mark the begin of futex exit explicitly
  futex: Set task::futex_state to DEAD right after handling futex exit
  futex: Split futex_mm_release() for exit/exec
  exit/exec: Seperate mm_release()
  futex: Replace PF_EXITPIDONE with a state
  ...
2019-11-26 16:02:40 -08:00
Al Viro 6c2d4798a8 new helper: lookup_positive_unlocked()
Most of the callers of lookup_one_len_unlocked() treat negatives are
ERR_PTR(-ENOENT).  Provide a helper that would do just that.  Note
that a pinned positive dentry remains positive - it's ->d_inode is
stable, etc.; a pinned _negative_ dentry can become positive at any
point as long as you are not holding its parent at least shared.
So using lookup_one_len_unlocked() needs to be careful;
lookup_positive_unlocked() is safer and that's what the callers
end up open-coding anyway.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-11-15 13:49:04 -05:00
Tejun Heo 40430452fd kernfs: use 64bit inos if ino_t is 64bit
Each kernfs_node is identified with a 64bit ID.  The low 32bit is
exposed as ino and the high gen.  While this already allows using inos
as keys by looking up with wildcard generation number of 0, it's
adding unnecessary complications for 64bit ino archs which can
directly use kernfs_node IDs as inos to uniquely identify each cgroup
instance.

This patch exposes IDs directly as inos on 64bit ino archs.  The
conversion is mostly straight-forward.

* 32bit ino archs behave the same as before.  64bit ino archs now use
  the whole 64bit ID as ino and the generation number is fixed at 1.

* 64bit inos still use the same idr allocator which gurantees that the
  lower 32bits identify the current live instance uniquely and the
  high 32bits are incremented whenever the low bits wrap.  As the
  upper 32bits are no longer used as gen and we don't wanna start ino
  allocation with 33rd bit set, the initial value for highbits
  allocation is changed to 0 on 64bit ino archs.

* blktrace exposes two 32bit numbers - (INO,GEN) pair - to identify
  the issuing cgroup.  Userland builds FILEID_INO32_GEN fids from
  these numbers to look up the cgroups.  To remain compatible with the
  behavior, always output (LOW32,HIGH32) which will be constructed
  back to the original 64bit ID by __kernfs_fh_to_dentry().

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
2019-11-12 08:18:04 -08:00
Tejun Heo 33c5ac9175 kernfs: implement custom exportfs ops and fid type
The current kernfs exportfs implementation uses the generic_fh_*()
helpers and FILEID_INO32_GEN[_PARENT] which limits ino to 32bits.
Let's implement custom exportfs operations and fid type to remove the
restriction.

* FILEID_KERNFS is a single u64 value whose content is
  kernfs_node->id.  This is the only native fid type.

* For backward compatibility with blk_log_action() path which exposes
  (ino,gen) pairs which userland assembles into FILEID_INO32_GEN keys,
  combine the generic keys into 64bit IDs in the same order.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
2019-11-12 08:18:04 -08:00
Tejun Heo fe0f726c9f kernfs: combine ino/id lookup functions into kernfs_find_and_get_node_by_id()
kernfs_find_and_get_node_by_ino() looks the kernfs_node matching the
specified ino.  On top of that, kernfs_get_node_by_id() and
kernfs_fh_get_inode() implement full ID matching by testing the rest
of ID.

On surface, confusingly, the two are slightly different in that the
latter uses 0 gen as wildcard while the former doesn't - does it mean
that the latter can't uniquely identify inodes w/ 0 gen?  In practice,
this is a distinction without a difference because generation number
starts at 1.  There are no actual IDs with 0 gen, so it can always
safely used as wildcard.

Let's simplify the code by renaming kernfs_find_and_get_node_by_ino()
to kernfs_find_and_get_node_by_id(), moving all lookup logics into it,
and removing now unnecessary kernfs_get_node_by_id().

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-12 08:18:04 -08:00
Tejun Heo 67c0496e87 kernfs: convert kernfs_node->id from union kernfs_node_id to u64
kernfs_node->id is currently a union kernfs_node_id which represents
either a 32bit (ino, gen) pair or u64 value.  I can't see much value
in the usage of the union - all that's needed is a 64bit ID which the
current code is already limited to.  Using a union makes the code
unnecessarily complicated and prevents using 64bit ino without adding
practical benefits.

This patch drops union kernfs_node_id and makes kernfs_node->id a u64.
ino is stored in the lower 32bits and gen upper.  Accessors -
kernfs[_id]_ino() and kernfs[_id]_gen() - are added to retrieve the
ino and gen.  This simplifies ID handling less cumbersome and will
allow using 64bit inos on supported archs.

This patch doesn't make any functional changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Alexei Starovoitov <ast@kernel.org>
2019-11-12 08:18:03 -08:00
Tejun Heo 880df13161 kernfs: kernfs_find_and_get_node_by_ino() should only look up activated nodes
kernfs node can be created in two separate steps - allocation and
activation.  This is used to make kernfs nodes visible only after the
internal states attached to the node are fully initialized.
kernfs_find_and_get_node_by_id() currently allows lookups of nodes
which aren't activated yet and thus can expose nodes are which are
still being prepped by kernfs users.

Fix it by disallowing lookups of nodes which aren't activated yet.

kernfs_find_and_get_node_by_ino()

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
2019-11-12 08:18:03 -08:00
Tejun Heo b680b08171 kernfs: use dumber locking for kernfs_find_and_get_node_by_ino()
kernfs_find_and_get_node_by_ino() uses RCU protection.  It's currently
a bit buggy because it can look up a node which hasn't been activated
yet and thus may end up exposing a node that the kernfs user is still
prepping.

While it can be fixed by pushing it further in the current direction,
it's already complicated and isn't clear whether the complexity is
justified.  The main use of kernfs_find_and_get_node_by_ino() is for
exportfs operations.  They aren't super hot and all the follow-up
operations (e.g. mapping to path) use normal locking anyway.

Let's switch to a dumber locking scheme and protect the lookup with
kernfs_idr_lock.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
2019-11-12 08:18:03 -08:00
Tejun Heo e23f568aa6 kernfs: fix ino wrap-around detection
When the 32bit ino wraps around, kernfs increments the generation
number to distinguish reused ino instances.  The wrap-around detection
tests whether the allocated ino is lower than what the cursor but the
cursor is pointing to the next ino to allocate so the condition never
triggers.

Fix it by remembering the last ino and comparing against that.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 4a3ef68aca ("kernfs: implement i_generation")
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org # v4.14+
2019-11-12 08:18:03 -08:00
Qian Cai 5facae4f35 locking/lockdep: Remove unused @nested argument from lock_release()
Since the following commit:

  b4adfe8e05 ("locking/lockdep: Remove unused argument in __lock_release")

@nested is no longer used in lock_release(), so remove it from all
lock_release() calls and friends.

Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: airlied@linux.ie
Cc: akpm@linux-foundation.org
Cc: alexander.levin@microsoft.com
Cc: daniel@iogearbox.net
Cc: davem@davemloft.net
Cc: dri-devel@lists.freedesktop.org
Cc: duyuyang@gmail.com
Cc: gregkh@linuxfoundation.org
Cc: hannes@cmpxchg.org
Cc: intel-gfx@lists.freedesktop.org
Cc: jack@suse.com
Cc: jlbec@evilplan.or
Cc: joonas.lahtinen@linux.intel.com
Cc: joseph.qi@linux.alibaba.com
Cc: jslaby@suse.com
Cc: juri.lelli@redhat.com
Cc: maarten.lankhorst@linux.intel.com
Cc: mark@fasheh.com
Cc: mhocko@kernel.org
Cc: mripard@kernel.org
Cc: ocfs2-devel@oss.oracle.com
Cc: rodrigo.vivi@intel.com
Cc: sean@poorly.run
Cc: st@kernel.org
Cc: tj@kernel.org
Cc: tytso@mit.edu
Cc: vdavydov.dev@gmail.com
Cc: vincent.guittot@linaro.org
Cc: viro@zeniv.linux.org.uk
Link: https://lkml.kernel.org/r/1568909380-32199-1-git-send-email-cai@lca.pw
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-10-09 12:46:10 +02:00
Linus Torvalds cfb82e1df8 y2038: add inode timestamp clamping
This series from Deepa Dinamani adds a per-superblock minimum/maximum
 timestamp limit for a file system, and clamps timestamps as they are
 written, to avoid random behavior from integer overflow as well as having
 different time stamps on disk vs in memory.
 
 At mount time, a warning is now printed for any file system that can
 represent current timestamps but not future timestamps more than 30
 years into the future, similar to the arbitrary 30 year limit that was
 added to settimeofday().
 
 This was picked as a compromise to warn users to migrate to other file
 systems (e.g. ext4 instead of ext3) when they need the file system to
 survive beyond 2038 (or similar limits in other file systems), but not
 get in the way of normal usage.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJdcs20AAoJEJpsee/mABjZaOwQALl3lBEhg0aV6a0ZZ1uYehtd
 vcjZ6OpehfiOAxYJu0wfLPATo4T0FuBxZKz3+trkJDICcxyc68AJ2wijwInIQnZW
 MrSKnPyv/fSGp8Jr5w/0CLdp6yT6Dh7z4j2UxhwusR1bQh4cCYSswDg29/nmxgKp
 Nu8m7jMvJQ2Q0r4Zy0sT/MaycUcSH5yvpyTcsYFixGOz1niNy91ISs1+aq6HZ3i3
 +cuYTUy13y40iNUHzFBTcJItBnikwZOQ/zjNfJFXZ3bVEUPg8ZTLPYQ0OZz+pM0Z
 AlXCKghb2EOKgq729LtA6oaY+Nom/1Gm1p80q3G+nGRVOqRgC+dfAVPZQoiER5Y1
 zNPEDf2Sf7J9xktvfC+Qqa9QEUPLKs22ZIccG+vYBW65sS8IAiEDH3LAt444GGls
 yB/Cx/Qw7BftpR5Om27Mhm5jDQzr43iTkZaPQWq7ydJXpfxnjlg9L19yS1omDFyV
 hdbBXY6FikUICPKUW6I49z5BhjL+kmK9M2DVljImmdKNDTrfr0xY5M/EWjJZ7X+I
 rnSe9qTY+iQ5/AXANn5wfj1Y6L5IxkmdWI/zDIbKhYMZLCqqFLd3mJERbs+CMDJq
 qNrYyFPReFrg50oSduBPAByMTR4x9hus7iIC7r77kpoz5i60DPmIJoTfFm3844Gv
 sBEyvWV08CpE9mSzXuv6
 =em9y
 -----END PGP SIGNATURE-----

Merge tag 'y2038-vfs' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground

Pull y2038 vfs updates from Arnd Bergmann:
 "Add inode timestamp clamping.

  This series from Deepa Dinamani adds a per-superblock minimum/maximum
  timestamp limit for a file system, and clamps timestamps as they are
  written, to avoid random behavior from integer overflow as well as
  having different time stamps on disk vs in memory.

  At mount time, a warning is now printed for any file system that can
  represent current timestamps but not future timestamps more than 30
  years into the future, similar to the arbitrary 30 year limit that was
  added to settimeofday().

  This was picked as a compromise to warn users to migrate to other file
  systems (e.g. ext4 instead of ext3) when they need the file system to
  survive beyond 2038 (or similar limits in other file systems), but not
  get in the way of normal usage"

* tag 'y2038-vfs' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground:
  ext4: Reduce ext4 timestamp warnings
  isofs: Initialize filesystem timestamp ranges
  pstore: fs superblock limits
  fs: omfs: Initialize filesystem timestamp ranges
  fs: hpfs: Initialize filesystem timestamp ranges
  fs: ceph: Initialize filesystem timestamp ranges
  fs: sysv: Initialize filesystem timestamp ranges
  fs: affs: Initialize filesystem timestamp ranges
  fs: fat: Initialize filesystem timestamp ranges
  fs: cifs: Initialize filesystem timestamp ranges
  fs: nfs: Initialize filesystem timestamp ranges
  ext4: Initialize timestamps limits
  9p: Fill min and max timestamps in sb
  fs: Fill in max and min timestamps in superblock
  utimes: Clamp the timestamps before update
  mount: Add mount warning for impending timestamp expiry
  timestamp_truncate: Replace users of timespec64_trunc
  vfs: Add timestamp_truncate() api
  vfs: Add file timestamp range support
2019-09-19 09:42:37 -07:00
Deepa Dinamani 3818c1907a timestamp_truncate: Replace users of timespec64_trunc
Update the inode timestamp updates to use timestamp_truncate()
instead of timespec64_trunc().

The change was mostly generated by the following coccinelle
script.

virtual context
virtual patch

@r1 depends on patch forall@
struct inode *inode;
identifier i_xtime =~ "^i_[acm]time$";
expression e;
@@

inode->i_xtime =
- timespec64_trunc(
+ timestamp_truncate(
...,
- e);
+ inode);

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Jeff Layton <jlayton@kernel.org>
Cc: adrian.hunter@intel.com
Cc: dedekind1@gmail.com
Cc: gregkh@linuxfoundation.org
Cc: hch@lst.de
Cc: jaegeuk@kernel.org
Cc: jlbec@evilplan.org
Cc: richard@nod.at
Cc: tj@kernel.org
Cc: yuchao0@huawei.com
Cc: linux-f2fs-devel@lists.sourceforge.net
Cc: linux-ntfs-dev@lists.sourceforge.net
Cc: linux-mtd@lists.infradead.org
2019-08-30 07:27:17 -07:00
Jia-Ju Bai bbe70e4e42 fs: kernfs: Fix possible null-pointer dereferences in kernfs_path_from_node_locked()
In kernfs_path_from_node_locked(), there is an if statement on line 147
to check whether buf is NULL:
    if (buf)

When buf is NULL, it is used on line 151:
    len += strlcpy(buf + len, parent_str, ...)
and line 158:
    len += strlcpy(buf + len, "/", ...)
and line 160:
    len += strlcpy(buf + len, kn->name, ...)

Thus, possible null-pointer dereferences may occur.

To fix these possible bugs, buf is checked before being used.
If it is NULL, -EINVAL is returned.

These bugs are found by a static analysis tool STCheck written by us.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Link: https://lore.kernel.org/r/20190724022242.27505-1-baijiaju1990@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25 15:32:51 +02:00
Peng Wang 2fd60da46d kernfs: fix potential null pointer dereference
Get root safely after kn is ensureed to be not null.

Signed-off-by: Peng Wang <rocking@whu.edu.cn>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20190708151611.13242-1-rocking@whu.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25 15:30:48 +02:00
Thomas Gleixner 55716d2643 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 428
Based on 1 normalized pattern(s):

  this file is released under the gplv2

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 68 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190114.292346262@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:37:16 +02:00
Thomas Gleixner ec8f24b7fa treewide: Add SPDX license identifier - Makefile/Kconfig
Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:46 +02:00
Linus Torvalds d27fb65bc2 Merge branch 'work.dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc dcache updates from Al Viro:
 "Most of this pile is putting name length into struct name_snapshot and
  making use of it.

  The beginning of this series ("ovl_lookup_real_one(): don't bother
  with strlen()") ought to have been split in two (separate switch of
  name_snapshot to struct qstr from overlayfs reaping the trivial
  benefits of that), but I wanted to avoid a rebase - by the time I'd
  spotted that it was (a) in -next and (b) close to 5.1-final ;-/"

* 'work.dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  audit_compare_dname_path(): switch to const struct qstr *
  audit_update_watch(): switch to const struct qstr *
  inotify_handle_event(): don't bother with strlen()
  fsnotify: switch send_to_group() and ->handle_event to const struct qstr *
  fsnotify(): switch to passing const struct qstr * for file_name
  switch fsnotify_move() to passing const struct qstr * for old_name
  ovl_lookup_real_one(): don't bother with strlen()
  sysv: bury the broken "quietly truncate the long filenames" logics
  nsfs: unobfuscate
  unexport d_alloc_pseudo()
2019-05-07 20:03:32 -07:00
Linus Torvalds f72dae2089 selinux/stable-5.2 PR 20190507
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAlzRrxsUHHBhdWxAcGF1
 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXPhlw/9EQVpaHZ62ruzY9a2POvhpAsiRzcB
 hELj15iLf12EUKGhxgihDaBc7uQOlOWcFbQO8xtw7YxV7KlOtAx5ijsM9OSeczVk
 MhCz7hIUnZwgS4/sJ4HDLNKvgq2xSl4MMjZCZ+0SGfNrfvOo0yidj3w6CLrtKCD2
 qhUyX0FtGPHKZEQnEULUHm92U//0+iKtK/5fEX7hXTwpujwzRS+E0kSwnnY18lx8
 VW1/fgElqixwHpQvKsUFMi4MkdWD3YydGXSaePVur6GpKGFbA+ooHng49HpMwiOH
 33RkbnXp/MxD8MLX/eMpFwMAt92rss6Sf8MPE+XJ+SeN193R8PGguNt7F6f2SR62
 W051tsDJ4p97L+7FEw5Y5i0HDxGQintp/tlYLWStXCa/0yntMEyjZHichPr3IteN
 G9qg3iSqI+TzhYf7rxFk1lmnyOAj11UGAy9HhRva6pTmXrwlJ12amEbMzbMae1Of
 +h0hj4+p/mINGV7v38Igy015b3qMMaIwe9cnAstYnz7MZgjm5YhEWPlJMqus9nS2
 XfRh5x8Dhy9Q9NRXusbZltJHAjSAtyKXvcjN7vCKFE0r/7qWQ6nkzp7PD0CVQqLV
 FKSQ4MSq2TDfQ/Oq7iQc9jEIMomud5FBPNnEjLCndR05jsQzSxCYKUvonM3wob/B
 rCsoxkDZwSivsdo=
 =Ts2E
 -----END PGP SIGNATURE-----

Merge tag 'selinux-pr-20190507' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux

Pull selinux updates from Paul Moore:
 "We've got a few SELinux patches for the v5.2 merge window, the
  highlights are below:

   - Add LSM hooks, and the SELinux implementation, for proper labeling
     of kernfs. While we are only including the SELinux implementation
     here, the rest of the LSM folks have given the hooks a thumbs-up.

   - Update the SELinux mdp (Make Dummy Policy) script to actually work
     on a modern system.

   - Disallow userspace to change the LSM credentials via
     /proc/self/attr when the task's credentials are already overridden.

     The change was made in procfs because all the LSM folks agreed this
     was the Right Thing To Do and duplicating it across each LSM was
     going to be annoying"

* tag 'selinux-pr-20190507' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  proc: prevent changes to overridden credentials
  selinux: Check address length before reading address family
  kernfs: fix xattr name handling in LSM helpers
  MAINTAINERS: update SELinux file patterns
  selinux: avoid uninitialized variable warning
  selinux: remove useless assignments
  LSM: lsm_hooks.h - fix missing colon in docstring
  selinux: Make selinux_kernfs_init_security static
  kernfs: initialize security of newly created nodes
  selinux: implement the kernfs_init_security hook
  LSM: add new hook for kernfs node initialization
  kernfs: use simple_xattrs for security attributes
  selinux: try security xattr after genfs for kernfs filesystems
  kernfs: do not alloc iattrs in kernfs_xattr_get
  kernfs: clean up struct kernfs_iattrs
  scripts/selinux: fix build
  selinux: use kernel linux/socket.h for genheaders and mdp
  scripts/selinux: modernize mdp
2019-05-07 18:48:09 -07:00
Al Viro 25b229dff4 fsnotify(): switch to passing const struct qstr * for file_name
Note that in fnsotify_move() and fsnotify_link() we are guaranteed
that dentry->d_name won't change during the fsnotify() evaluation
(by having the parent directory locked exclusive), so we don't
need to fetch dentry->d_name.name in the callers.  In fsnotify_dirent()
the same stability of dentry->d_name is also true, but it's a bit
more convoluted - there is one callchain (devpts_pty_new() ->
fsnotify_create() -> fsnotify_dirent()) where the parent is _not_
locked, but on devpts ->d_name of everything is unchanging; it
has neither explicit nor implicit renames.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-04-26 13:37:25 -04:00
Andrea Parri 998267900c kernfs: fix barrier usage in __kernfs_new_node()
smp_mb__before_atomic() can not be applied to atomic_set().  Remove the
barrier and rely on RELEASE synchronization.

Fixes: ba16b2846a ("kernfs: add an API to get kernfs node from inode number")
Cc: stable@vger.kernel.org
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25 21:41:35 +02:00
Ondrej Mosnacek 1537ad15c9 kernfs: fix xattr name handling in LSM helpers
The implementation of kernfs_security_xattr_*() helpers reuses the
kernfs_node_xattr_*() functions, which take the suffix of the xattr name
and extract full xattr name from it using xattr_full_name(). However,
this function relies on the fact that the suffix passed to xattr
handlers from VFS is always constructed from the full name by just
incerementing the pointer. This doesn't necessarily hold for the callers
of kernfs_security_xattr_*(), so their usage will easily lead to
out-of-bounds access.

Fix this by moving the xattr name reconstruction to the VFS xattr
handlers and replacing the kernfs_security_xattr_*() helpers with more
general kernfs_xattr_*() helpers that take full xattr name and allow
accessing all kernfs node's xattrs.

Reported-by: kernel test robot <rong.a.chen@intel.com>
Fixes: b230d5aba2 ("LSM: add new hook for kernfs node initialization")
Fixes: ec882da5cd ("selinux: implement the kernfs_init_security hook")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-04-04 09:00:27 -04:00
Ondrej Mosnacek e19dfdc83b kernfs: initialize security of newly created nodes
Use the new security_kernfs_init_security() hook to allow LSMs to
possibly assign a non-default security context to a newly created kernfs
node based on the attributes of the new node and also its parent node.

This fixes an issue with cgroupfs under SELinux, where newly created
cgroup subdirectories/files would not inherit its parent's context if
it had been set explicitly to a non-default value (other than the genfs
context specified by the policy). This can be reproduced as follows (on
Fedora/RHEL):

    # mkdir /sys/fs/cgroup/unified/test
    # # Need permissive to change the label under Fedora policy:
    # setenforce 0
    # chcon -t container_file_t /sys/fs/cgroup/unified/test
    # ls -lZ /sys/fs/cgroup/unified
    total 0
    -r--r--r--.  1 root root system_u:object_r:cgroup_t:s0         0 Jan 29 03:06 cgroup.controllers
    -rw-r--r--.  1 root root system_u:object_r:cgroup_t:s0         0 Jan 29 03:06 cgroup.max.depth
    -rw-r--r--.  1 root root system_u:object_r:cgroup_t:s0         0 Jan 29 03:06 cgroup.max.descendants
    -rw-r--r--.  1 root root system_u:object_r:cgroup_t:s0         0 Jan 29 03:06 cgroup.procs
    -r--r--r--.  1 root root system_u:object_r:cgroup_t:s0         0 Jan 29 03:06 cgroup.stat
    -rw-r--r--.  1 root root system_u:object_r:cgroup_t:s0         0 Jan 29 03:06 cgroup.subtree_control
    -rw-r--r--.  1 root root system_u:object_r:cgroup_t:s0         0 Jan 29 03:06 cgroup.threads
    drwxr-xr-x.  2 root root system_u:object_r:cgroup_t:s0         0 Jan 29 03:06 init.scope
    drwxr-xr-x. 26 root root system_u:object_r:cgroup_t:s0         0 Jan 29 03:21 system.slice
    drwxr-xr-x.  3 root root system_u:object_r:container_file_t:s0 0 Jan 29 03:15 test
    drwxr-xr-x.  3 root root system_u:object_r:cgroup_t:s0         0 Jan 29 03:06 user.slice
    # mkdir /sys/fs/cgroup/unified/test/subdir

Actual result:

    # ls -ldZ /sys/fs/cgroup/unified/test/subdir
    drwxr-xr-x. 2 root root system_u:object_r:cgroup_t:s0 0 Jan 29 03:15 /sys/fs/cgroup/unified/test/subdir

Expected result:

    # ls -ldZ /sys/fs/cgroup/unified/test/subdir
    drwxr-xr-x. 2 root root unconfined_u:object_r:container_file_t:s0 0 Jan 29 03:15 /sys/fs/cgroup/unified/test/subdir

Link: https://github.com/SELinuxProject/selinux-kernel/issues/39

Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-03-20 22:10:15 -04:00
Ondrej Mosnacek b230d5aba2 LSM: add new hook for kernfs node initialization
This patch introduces a new security hook that is intended for
initializing the security data for newly created kernfs nodes, which
provide a way of storing a non-default security context, but need to
operate independently from mounts (and therefore may not have an
associated inode at the moment of creation).

The main motivation is to allow kernfs nodes to inherit the context of
the parent under SELinux, similar to the behavior of
security_inode_init_security(). Other LSMs may implement their own logic
for handling the creation of new nodes.

This patch also adds helper functions to <linux/kernfs.h> for
getting/setting security xattrs of a kernfs node so that LSMs hooks are
able to do their job. Other important attributes should be accessible
direcly in the kernfs_node fields (in case there is need for more, then
new helpers should be added to kernfs.h along with the patch that needs
them).

Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: more manual merge fixes]
Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-03-20 22:01:02 -04:00
Ondrej Mosnacek 0ac6075a32 kernfs: use simple_xattrs for security attributes
Replace the special handling of security xattrs with simple_xattrs, as
is already done for the trusted xattrs. This simplifies the code and
allows LSMs to use more than just a single xattr to do their business.

Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: manual merge fixes]
Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-03-20 21:54:33 -04:00