Getting the end offset for a file extent item requires a bit of code since
the extent can be either inline or regular/prealloc. There are some places
all over the code base that open code this logic and in another patch
later in this series it will be needed again. Therefore encapsulate this
logic in a helper function and use it.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In order to keep track of where we have file extents on disk, and thus
where it is safe to adjust the i_size to, we need to have a tree in
place to keep track of the contiguous areas we have file extents for.
Add helpers to use this tree, as it's not required for NO_HOLES file
systems. We will use this by setting DIRTY for areas we know we have
file extent item's set, and clearing it when we remove file extent items
for truncation.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Dan's smatch tool reports
fs/btrfs/file-item.c:295 btrfs_lookup_bio_sums()
warn: should this be 'count == -1'
which points to the while (count--) loop. With count == 0 the check
itself could decrement it to -1. There's a WARN_ON a few lines below
that has never been seen in practice though.
It turns out that the value of page_bytes_left matches the count (by
sectorsize multiples). The loop never reaches the state where count
would go to -1, because page_bytes_left == 0 is found first and this
breaks out.
For clarity, use only plain check on count (and only for positive
value), decrement safely inside the loop. Any other discrepancy after
the whole bio list processing should be reported by the exising
WARN_ON_ONCE as well.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
ordered->start, ordered->len, and ordered->disk_len correspond to
fi->disk_bytenr, fi->num_bytes, and fi->disk_num_bytes, respectively.
It's confusing to translate between the two naming schemes. Since a
btrfs_ordered_extent is basically a pending btrfs_file_extent_item,
let's make the former use the naming from the latter.
Note that I didn't touch the names in tracepoints just in case there are
scripts depending on the current naming.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We can encode this in the offset parameter: -1 means use the page
offsets, anything else is a valid offset.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, we have two wrappers for __btrfs_lookup_bio_sums():
btrfs_lookup_bio_sums_dio(), which is used for direct I/O, and
btrfs_lookup_bio_sums(), which is used everywhere else. The only
difference is that the _dio variant looks up csums starting at the given
offset instead of using the page index, which isn't actually direct
I/O-specific. Let's clean up the signature and return value of
__btrfs_lookup_bio_sums(), rename it to btrfs_lookup_bio_sums(), and get
rid of the trivial helpers.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When logging a file that has shared extents (reflinked with other files or
with itself), we can end up logging multiple checksum items that cover
overlapping ranges. This confuses the search for checksums at log replay
time causing some checksums to never be added to the fs/subvolume tree.
Consider the following example of a file that shares the same extent at
offsets 0 and 256Kb:
[ bytenr 13893632, offset 64Kb, len 64Kb ]
0 64Kb
[ bytenr 13631488, offset 64Kb, len 192Kb ]
64Kb 256Kb
[ bytenr 13893632, offset 0, len 256Kb ]
256Kb 512Kb
When logging the inode, at tree-log.c:copy_items(), when processing the
file extent item at offset 0, we log a checksum item covering the range
13959168 to 14024704, which corresponds to 13893632 + 64Kb and 13893632 +
64Kb + 64Kb, respectively.
Later when processing the extent item at offset 256K, we log the checksums
for the range from 13893632 to 14155776 (which corresponds to 13893632 +
256Kb). These checksums get merged with the checksum item for the range
from 13631488 to 13893632 (13631488 + 256Kb), logged by a previous fsync.
So after this we get the two following checksum items in the log tree:
(...)
item 6 key (EXTENT_CSUM EXTENT_CSUM 13631488) itemoff 3095 itemsize 512
range start 13631488 end 14155776 length 524288
item 7 key (EXTENT_CSUM EXTENT_CSUM 13959168) itemoff 3031 itemsize 64
range start 13959168 end 14024704 length 65536
The first one covers the range from the second one, they overlap.
So far this does not cause a problem after replaying the log, because
when replaying the file extent item for offset 256K, we copy all the
checksums for the extent 13893632 from the log tree to the fs/subvolume
tree, since searching for an checksum item for bytenr 13893632 leaves us
at the first checksum item, which covers the whole range of the extent.
However if we write 64Kb to file offset 256Kb for example, we will
not be able to find and copy the checksums for the last 128Kb of the
extent at bytenr 13893632, referenced by the file range 384Kb to 512Kb.
After writing 64Kb into file offset 256Kb we get the following extent
layout for our file:
[ bytenr 13893632, offset 64K, len 64Kb ]
0 64Kb
[ bytenr 13631488, offset 64Kb, len 192Kb ]
64Kb 256Kb
[ bytenr 14155776, offset 0, len 64Kb ]
256Kb 320Kb
[ bytenr 13893632, offset 64Kb, len 192Kb ]
320Kb 512Kb
After fsync'ing the file, if we have a power failure and then mount
the filesystem to replay the log, the following happens:
1) When replaying the file extent item for file offset 320Kb, we
lookup for the checksums for the extent range from 13959168
(13893632 + 64Kb) to 14155776 (13893632 + 256Kb), through a call
to btrfs_lookup_csums_range();
2) btrfs_lookup_csums_range() finds the checksum item that starts
precisely at offset 13959168 (item 7 in the log tree, shown before);
3) However that checksum item only covers 64Kb of data, and not 192Kb
of data;
4) As a result only the checksums for the first 64Kb of data referenced
by the file extent item are found and copied to the fs/subvolume tree.
The remaining 128Kb of data, file range 384Kb to 512Kb, doesn't get
the corresponding data checksums found and copied to the fs/subvolume
tree.
5) After replaying the log userspace will not be able to read the file
range from 384Kb to 512Kb, because the checksums are missing and
resulting in an -EIO error.
The following steps reproduce this scenario:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt/sdc
$ xfs_io -f -c "pwrite -S 0xa3 0 256K" /mnt/sdc/foobar
$ xfs_io -c "fsync" /mnt/sdc/foobar
$ xfs_io -c "pwrite -S 0xc7 256K 256K" /mnt/sdc/foobar
$ xfs_io -c "reflink /mnt/sdc/foobar 320K 0 64K" /mnt/sdc/foobar
$ xfs_io -c "fsync" /mnt/sdc/foobar
$ xfs_io -c "pwrite -S 0xe5 256K 64K" /mnt/sdc/foobar
$ xfs_io -c "fsync" /mnt/sdc/foobar
<power failure>
$ mount /dev/sdc /mnt/sdc
$ md5sum /mnt/sdc/foobar
md5sum: /mnt/sdc/foobar: Input/output error
$ dmesg | tail
[165305.003464] BTRFS info (device sdc): no csum found for inode 257 start 401408
[165305.004014] BTRFS info (device sdc): no csum found for inode 257 start 405504
[165305.004559] BTRFS info (device sdc): no csum found for inode 257 start 409600
[165305.005101] BTRFS info (device sdc): no csum found for inode 257 start 413696
[165305.005627] BTRFS info (device sdc): no csum found for inode 257 start 417792
[165305.006134] BTRFS info (device sdc): no csum found for inode 257 start 421888
[165305.006625] BTRFS info (device sdc): no csum found for inode 257 start 425984
[165305.007278] BTRFS info (device sdc): no csum found for inode 257 start 430080
[165305.008248] BTRFS warning (device sdc): csum failed root 5 ino 257 off 393216 csum 0x1337385e expected csum 0x00000000 mirror 1
[165305.009550] BTRFS warning (device sdc): csum failed root 5 ino 257 off 393216 csum 0x1337385e expected csum 0x00000000 mirror 1
Fix this simply by deleting first any checksums, from the log tree, for the
range of the extent we are logging at copy_items(). This ensures we do not
get checksum items in the log tree that have overlapping ranges.
This is a long time issue that has been present since we have the clone
(and deduplication) ioctl, and can happen both when an extent is shared
between different files and within the same file.
A test case for fstests follows soon.
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We can now remove the bdev from extent_map. Previous patches made sure
that bio_set_dev is correctly in all places and that we don't need to
grab it from latest_bdev or pass it around inside the extent map.
Signed-off-by: David Sterba <dsterba@suse.com>
Currently btrfs_csum_data() relied on the crc32c() wrapper around the
crypto framework for calculating the CRCs.
As we have our own crypto_shash structure in the fs_info now, we can
directly call into the crypto framework without going trough the wrapper.
This way we can even remove the btrfs_csum_data() and btrfs_csum_final()
wrappers.
The module dependency on crc32c is preserved via MODULE_SOFTDEP("pre:
crc32c"), which was previously provided by LIBCRC32C config option doing
the same.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
BTRFS has the implicit assumption that a checksum in compressed_bio is 4
bytes. While this is true for CRC32C, it is not for any other checksum.
Change the data type to be a byte array and adjust loop index calculation
accordingly.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
BTRFS has the implicit assumption that a checksum in btrfs_orderd_sums
is 4 bytes. While this is true for CRC32C, it is not for any other
checksum.
Change the data type to be a byte array and adjust loop index
calculation accordingly.
This includes moving the adjustment of 'index' by 'ins_size' in
btrfs_csum_file_blocks() before dividing 'ins_size' by the checksum
size, because before this patch the 'sums' member of 'struct
btrfs_ordered_sum' was 4 Bytes in size and afterwards it is only one
byte.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Ordered csums are keyed off of a btrfs_ordered_extent, which already has
a reference to the inode. This implies that an explicit inode argument
is redundant. So remove it.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since commit c40a3d38af ("Btrfs: Compute and look up csums based on
sectorsized blocks") we do a kmap_atomic() on the contents of a bvec.
The code before c40a3d38af had the kmap region just around the
checksumming too.
kmap_atomic() in turn does a preempt_disable() and pagefault_disable(),
so we shouldn't map the data for too long. Reduce the time the bvec's
page is mapped to when we actually need it.
Performance wise it doesn't seem to make a huge difference with a 2 vcpu VM
on a /dev/zram device:
vanilla patched delta
write 17.4MiB/s 17.8MiB/s +0.4MiB/s (+2%)
read 40.6MiB/s 41.5MiB/s +0.9MiB/s (+2%)
The following fio job profile was used in the comparision:
[global]
ioengine=libaio
direct=1
sync=1
norandommap
time_based
runtime=10m
size=100m
group_reporting
numjobs=2
[test]
filename=/mnt/test/fio
rw=randrw
rwmixread=70
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Recent multi-page biovec rework allowed creation of bios that can span
large regions - up to 128 megabytes in the case of btrfs. OTOH btrfs'
submission path currently allocates a contiguous array to store the
checksums for every bio submitted. This means we can request up to
(128mb / BTRFS_SECTOR_SIZE) * 4 bytes + 32bytes of memory from kmalloc.
On busy systems with possibly fragmented memory said kmalloc can fail
which will trigger BUG_ON due to improper error handling IO submission
context in btrfs.
Until error handling is improved or bios in btrfs limited to a more
manageable size (e.g. 1m) let's use kvmalloc to fallback to vmalloc for
such large allocations. There is no hard requirement that the memory
allocated for checksums during IO submission has to be contiguous, but
this is a simple fix that does not require several non-contiguous
allocations.
For small writes this is unlikely to have any visible effect since
kmalloc will still satisfy allocation requests as usual. For larger
requests the code will just fallback to vmalloc.
We've performed evaluation on several workload types and there was no
significant difference kmalloc vs kvmalloc.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The end_io callback implemented as btrfs_io_bio_endio_readpage only
calls kfree. Also the callback is set only in case the csum buffer is
allocated and not pointing to the inline buffer. We can use that
information to drop the indirection and call a helper that will free the
csums only in the right case.
This shrinks struct btrfs_io_bio by 8 bytes.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
The io_bio tracks checksums and has an inline buffer or an allocated
one. And there's a third member that points to the right one, but we
don't need to use an extra pointer for that. Let btrfs_io_bio::csum
point to the right buffer and check that the inline buffer is not
accidentally freed.
This shrinks struct btrfs_io_bio by 8 bytes.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Functions that get btrfs inode can simply reach the fs_info by
dereferencing the root and this looks a bit more straightforward
compared to the btrfs_sb(...) indirection.
If the transaction handle is available and not NULL it's used instead.
Signed-off-by: David Sterba <dsterba@suse.com>
We used to call btrfs_file_extent_inline_len() to get the uncompressed
data size of an inlined extent.
However this function is hiding evil, for compressed extent, it has no
choice but to directly read out ram_bytes from btrfs_file_extent_item.
While for uncompressed extent, it uses item size to calculate the real
data size, and ignoring ram_bytes completely.
In fact, for corrupted ram_bytes, due to above behavior kernel
btrfs_print_leaf() can't even print correct ram_bytes to expose the bug.
Since we have the tree-checker to verify all EXTENT_DATA, such mismatch
can be detected pretty easily, thus we can trust ram_bytes without the
evil btrfs_file_extent_inline_len().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Remove GPL boilerplate text (long, short, one-line) and keep the rest,
ie. personal, company or original source copyright statements. Add the
SPDX header.
Signed-off-by: David Sterba <dsterba@suse.com>
Pull btrfs updates from David Sterba:
"The core updates improve error handling (mostly related to bios), with
the usual incremental work on the GFP_NOFS (mis)use removal,
refactoring or cleanups. Except the two top patches, all have been in
for-next for an extensive amount of time.
User visible changes:
- statx support
- quota override tunable
- improved compression thresholds
- obsoleted mount option alloc_start
Core updates:
- bio-related updates:
- faster bio cloning
- no allocation failures
- preallocated flush bios
- more kvzalloc use, memalloc_nofs protections, GFP_NOFS updates
- prep work for btree_inode removal
- dir-item validation
- qgoup fixes and updates
- cleanups:
- removed unused struct members, unused code, refactoring
- argument refactoring (fs_info/root, caller -> callee sink)
- SEARCH_TREE ioctl docs"
* 'for-4.13-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (115 commits)
btrfs: Remove false alert when fiemap range is smaller than on-disk extent
btrfs: Don't clear SGID when inheriting ACLs
btrfs: fix integer overflow in calc_reclaim_items_nr
btrfs: scrub: fix target device intialization while setting up scrub context
btrfs: qgroup: Fix qgroup reserved space underflow by only freeing reserved ranges
btrfs: qgroup: Introduce extent changeset for qgroup reserve functions
btrfs: qgroup: Fix qgroup reserved space underflow caused by buffered write and quotas being enabled
btrfs: qgroup: Return actually freed bytes for qgroup release or free data
btrfs: qgroup: Cleanup btrfs_qgroup_prepare_account_extents function
btrfs: qgroup: Add quick exit for non-fs extents
Btrfs: rework delayed ref total_bytes_pinned accounting
Btrfs: return old and new total ref mods when adding delayed refs
Btrfs: always account pinned bytes when dropping a tree block ref
Btrfs: update total_bytes_pinned when pinning down extents
Btrfs: make BUG_ON() in add_pinned_bytes() an ASSERT()
Btrfs: make add_pinned_bytes() take an s64 num_bytes instead of u64
btrfs: fix validation of XATTR_ITEM dir items
btrfs: Verify dir_item in iterate_object_props
btrfs: Check name_len before in btrfs_del_root_ref
btrfs: Check name_len before reading btrfs_get_name
...
Since dio submit has used bio_clone_fast, the submitted bio may not have a
reliable bi_vcnt, for the bio vector iterations in checksum related
functions, bio->bi_iter is not modified yet and it's safe to use
bio_for_each_segment, while for those bio vector iterations in dio read's
endio, we now save a copy of bvec_iter in struct btrfs_io_bio when cloning
bios and use the helper __bio_for_each_segment with the saved bvec_iter to
access each bvec.
Also for dio reads which don't get split, we also need to save a copy of
bio iterator in btrfs_bio_clone to let __bio_for_each_segments to access
each bvec in dio read's endio. Note that it doesn't affect other calls of
btrfs_bio_clone() because they don't need to use this iterator.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Replace bi_error with a new bi_status to allow for a clear conversion.
Note that device mapper overloaded bi_error with a private value, which
we'll have to keep arround at least for now and thus propagate to a
proper blk_status_t value.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Very often we have the checksums for an extent spread in multiple items
in the checksums tree, and currently the algorithm to delete them starts
by looking for them one by one and then deleting them one by one, which
is not optimal since each deletion involves shifting all the other items
in the leaf and when the leaf reaches some low threshold, to move items
off the leaf into its left and right neighbor leafs. Also, after each
item deletion we release our search path and start a new search for other
checksums items.
So optimize this by deleting in bulk all the items in the same leaf that
contain checksums for the extent being freed.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Currently btrfs_ino takes a struct inode and this causes a lot of
internal btrfs functions which consume this ino to take a VFS inode,
rather than btrfs' own struct btrfs_inode. In order to fix this "leak"
of VFS structs into the internals of btrfs first it's necessary to
eliminate all uses of struct inode for the purpose of inode. This patch
does that by using BTRFS_I to convert an inode to btrfs_inode. With
this problem eliminated subsequent patches will start eliminating the
passing of struct inode altogether, eventually resulting in a lot cleaner
code.
Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com>
[ fix btrfs_get_extent tracepoint prototype ]
Signed-off-by: David Sterba <dsterba@suse.com>
This cleans up the cases where the min/max macros were used with a cast
rather than using directly min_t/max_t.
Signed-off-by: Seraphime Kirkovski <kirkseraph@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are loads of functions in btrfs that accept a root parameter
but only use it to obtain an fs_info pointer. Let's convert those to
just accept an fs_info pointer directly.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In routines where someptr->fs_info is referenced multiple times, we
introduce a convenience variable. This makes the code considerably
more readable.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We track the node sizes per-root, but they never vary from the values
in the superblock. This patch messes with the 80-column style a bit,
but subsequent patches to factor out root->fs_info into a convenience
variable fix it up again.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are 11 functions that accept a root parameter and immediately
overwrite it. We can pass those an fs_info pointer instead.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Rework the loop a little bit to use the generic bio_for_each_segment_all
helper for iterating over the bio.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use bio_for_each_segment_all to iterate over the segments instead.
This requires a bit of reshuffling so that we only lookup up the ordered
item once inside the bio_for_each_segment_all loop.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The only memset we do is to 0, so sink the parameter to the function and
simplify all calls. Rename the function to reflect the behaviour.
Signed-off-by: David Sterba <dsterba@suse.com>
Jeff Mahoney's cleanup commit (14a1e067b4) wasn't correct for csums on
machines where the pagesize >= metadata blocksize.
This just reverts the relevant hunks to bring the old math back.
Signed-off-by: Chris Mason <clm@fb.com>
__btrfs_abort_transaction doesn't use its root parameter except to
obtain an fs_info pointer. We can obtain that from trans->root->fs_info
for now and from trans->fs_info in a later patch.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We use BTRFS_LEAF_DATA_SIZE - sizeof(struct btrfs_item) in
several places. This introduces a BTRFS_MAX_ITEM_SIZE macro to do the
same.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Recently during a crash it became apparent that this particular message
can be printed so many times that it causes the softlockup detector to
trigger. Fix it by ratelimiting it.
Signed-off-by: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: David Sterba <dsterba@suse.com>
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit c40a3d38af (Btrfs: Compute and look up csums based on
sectorsized blocks) changes around how we walk the bios while looking up
crcs. There's an inner loop that is jumping to the next bvec based on
sectors and before it derefs the next bvec, it needs to make sure we're
still in the bio.
In this case, the outer loop would have decided to stop moving forward
too, and the bvec deref is never actually used for anything. But
CONFIG_DEBUG_PAGEALLOC catches it because we're outside our bio.
Signed-off-by: Chris Mason <clm@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
So that its better organized.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Checksums are applicable to sectorsize units. The current code uses
bio->bv_len units to compute and look up checksums. This works on machines
where sectorsize == PAGE_SIZE. This patch makes the checksum computation and
look up code to work with sectorsize units.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Replace the integers by enums for better readability. The value 2 does
not have any meaning since a717531942
"Btrfs: do less aggressive btree readahead" (2009-01-22).
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana