Currently there are many platforms that dont enable ARCH_HAS_PTE_SPECIAL
but required to define quite similar fallback stubs for special page
table entry helpers such as pte_special() and pte_mkspecial(), as they
get build in generic MM without a config check. This creates two
generic fallback stub definitions for these helpers, eliminating much
code duplication.
mips platform has a special case where pte_special() and pte_mkspecial()
visibility is wider than what ARCH_HAS_PTE_SPECIAL enablement requires.
This restricts those symbol visibility in order to avoid redefinitions
which is now exposed through this new generic stubs and subsequent build
failure. arm platform set_pte_at() definition needs to be moved into a
C file just to prevent a build failure.
[anshuman.khandual@arm.com: use defined(CONFIG_ARCH_HAS_PTE_SPECIAL) in mips per Thomas]
Link: http://lkml.kernel.org/r/1583851924-21603-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Guo Ren <guoren@kernel.org> [csky]
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Acked-by: Stafford Horne <shorne@gmail.com> [openrisc]
Acked-by: Helge Deller <deller@gmx.de> [parisc]
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Sam Creasey <sammy@sammy.net>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Link: http://lkml.kernel.org/r/1583802551-15406-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are many platforms with exact same value for VM_DATA_DEFAULT_FLAGS
This creates a default value for VM_DATA_DEFAULT_FLAGS in line with the
existing VM_STACK_DEFAULT_FLAGS. While here, also define some more
macros with standard VMA access flag combinations that are used
frequently across many platforms. Apart from simplification, this
reduces code duplication as well.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Rich Felker <dalias@libc.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Chris Zankel <chris@zankel.net>
Link: http://lkml.kernel.org/r/1583391014-8170-2-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It is unlikely that an inaccessible VMA without required permission flags
will get a page fault. Hence lets just append unlikely() directive to
such checks in order to improve performance while also standardizing it
across various platforms.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Link: http://lkml.kernel.org/r/1582525304-32113-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Add kproobes/uprobes support
- Add lockdep, rseq, gcov support
- Fixup init_fpu
- Fixup ftrace_modify deadlock
- Fixup speculative execution on IO area
-----BEGIN PGP SIGNATURE-----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=yrFg
-----END PGP SIGNATURE-----
Merge tag 'csky-for-linus-5.7-rc1' of git://github.com/c-sky/csky-linux
Pull csky updates from Guo Ren:
- Add kproobes/uprobes support
- Add lockdep, rseq, gcov support
- Fixup init_fpu
- Fixup ftrace_modify deadlock
- Fixup speculative execution on IO area
* tag 'csky-for-linus-5.7-rc1' of git://github.com/c-sky/csky-linux:
csky: Fixup cpu speculative execution to IO area
csky: Add uprobes support
csky: Add kprobes supported
csky: Enable LOCKDEP_SUPPORT
csky: Enable the gcov function
csky: Fixup get wrong psr value from phyical reg
csky/ftrace: Fixup ftrace_modify_code deadlock without CPU_HAS_ICACHE_INS
csky: Implement ftrace with regs
csky: Add support for restartable sequence
csky: Implement ptrace regs and stack API
csky: Fixup init_fpu compile warning with __init
For the memory size ( > 512MB, < 1GB), the MSA setting is:
- SSEG0: PHY_START , PHY_START + 512MB
- SSEG1: PHY_START + 512MB, PHY_START + 1GB
But the real memory is no more than 1GB, there is a gap between the
end size of memory and border of 1GB. CPU could speculatively
execute to that gap and if the gap of the bus couldn't respond to
the CPU request, then the crash will happen.
Now make the setting with:
- SSEG0: PHY_START , PHY_START + 512MB (no change)
- SSEG1: Disabled (We use highmem to use the memory of 512MB~1GB)
We also deprecated zhole_szie[] settings, it's only used by arm
style CPUs. All memory gap should use Reserved setting of dts in
csky system.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
This patch adds support for uprobes on csky architecture.
Just like kprobe, it support single-step and simulate instructions.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
This patch enable kprobes, kretprobes, ftrace interface. It utilized
software breakpoint and single step debug exceptions, instructions
simulation on csky.
We use USR_BKPT replace origin instruction, and the kprobe handler
prepares an excutable memory slot for out-of-line execution with a
copy of the original instruction being probed. Most of instructions
could be executed by single-step, but some instructions need origin
pc value to execute and we need software simulate these instructions.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Change a header to mandatory-y if both of the following are met:
[1] At least one architecture (except um) specifies it as generic-y in
arch/*/include/asm/Kbuild
[2] Every architecture (except um) either has its own implementation
(arch/*/include/asm/*.h) or specifies it as generic-y in
arch/*/include/asm/Kbuild
This commit was generated by the following shell script.
----------------------------------->8-----------------------------------
arches=$(cd arch; ls -1 | sed -e '/Kconfig/d' -e '/um/d')
tmpfile=$(mktemp)
grep "^mandatory-y +=" include/asm-generic/Kbuild > $tmpfile
find arch -path 'arch/*/include/asm/Kbuild' |
xargs sed -n 's/^generic-y += \(.*\)/\1/p' | sort -u |
while read header
do
mandatory=yes
for arch in $arches
do
if ! grep -q "generic-y += $header" arch/$arch/include/asm/Kbuild &&
! [ -f arch/$arch/include/asm/$header ]; then
mandatory=no
break
fi
done
if [ "$mandatory" = yes ]; then
echo "mandatory-y += $header" >> $tmpfile
for arch in $arches
do
sed -i "/generic-y += $header/d" arch/$arch/include/asm/Kbuild
done
fi
done
sed -i '/^mandatory-y +=/d' include/asm-generic/Kbuild
LANG=C sort $tmpfile >> include/asm-generic/Kbuild
----------------------------------->8-----------------------------------
One obvious benefit is the diff stat:
25 files changed, 52 insertions(+), 557 deletions(-)
It is tedious to list generic-y for each arch that needs it.
So, mandatory-y works like a fallback default (by just wrapping
asm-generic one) when arch does not have a specific header
implementation.
See the following commits:
def3f7cefea1b39bae16
It is tedious to convert headers one by one, so I processed by a shell
script.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: http://lkml.kernel.org/r/20200210175452.5030-1-masahiroy@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lockdep is needed by proving the spinlocks and rwlocks. Currently,
we only put trace_hardirqs_on/off with csky_irq and
ret_from_exception.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
We should get psr value from regs->psr in stack, not directly get
it from phyiscal register then save the vector number in
tsk->trap_no.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
If ICACHE_INS is not supported, we use IPI to sync icache on each
core. But ftrace_modify_code is called from stop_machine from default
implementation of arch_ftrace_update_code and stop_machine callback
is irq_disabled. When you call ipi with irq_disabled, a deadlock will
happen.
We couldn't use icache_flush with irq_disabled, but startup make_nop
is specific case and it needn't ipi other cores.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
The defconfig compiles without linux/mm.h. With mm.h included the
include chain leands to:
| CC kernel/locking/percpu-rwsem.o
| In file included from include/linux/huge_mm.h:8,
| from include/linux/mm.h:567,
| from arch/csky/include/asm/uaccess.h:,
| from include/linux/uaccess.h:11,
| from include/linux/sched/task.h:11,
| from include/linux/sched/signal.h:9,
| from include/linux/rcuwait.h:6,
| from include/linux/percpu-rwsem.h:8,
| from kernel/locking/percpu-rwsem.c:6:
| include/linux/fs.h:1422:29: error: array type has incomplete element type 'struct percpu_rw_semaphore'
| 1422 | struct percpu_rw_semaphore rw_sem[SB_FREEZE_LEVELS];
once rcuwait.h includes linux/sched/signal.h.
Remove the linux/mm.h include.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200321113241.434999165@linutronix.de
This patch implements FTRACE_WITH_REGS for csky, which allows a traced
function's arguments (and some other registers) to be captured into a
struct pt_regs, allowing these to be inspected and/or modified.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Copied and adapted from vincent's patch, but modified for csky.
ref:
https://lore.kernel.org/linux-riscv/1572919114-3886-3-git-send-email-vincent.chen@sifive.com/raw
Add calls to rseq_signal_deliver(), rseq_handle_notify_resume() and
rseq_syscall() to introduce RSEQ support.
1. Call the rseq_handle_notify_resume() function on return to userspace
if TIF_NOTIFY_RESUME thread flag is set.
2. Call the rseq_signal_deliver() function to fixup on the pre-signal
frame when a signal is delivered on top of a restartable sequence
critical section.
3. Check that system calls are not invoked from within rseq critical
sections by invoking rseq_signal() from ret_from_syscall(). With
CONFIG_DEBUG_RSEQ, such behavior results in termination of the
process with SIGSEGV.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
WARNING: vmlinux.o(.text+0x2366): Section mismatch in reference from the
function csky_start_secondary() to the function .init.text:init_fpu()
The function csky_start_secondary() references
the function __init init_fpu().
This is often because csky_start_secondary lacks a __init
annotation or the annotation of init_fpu is wrong.
Reported-by: Lu Chongzhi <chongzhi.lcz@alibaba-inc.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
The C-Sky platform code is not a clock provider, and just needs to call
of_clk_init().
Hence it can include <linux/of_clk.h> instead of <linux/clk-provider.h>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
This is required for clone3 which passes the TLS value through a
struct rather than a register.
Cc: Amanieu d'Antras <amanieu@gmail.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Add the pci related code for csky arch to support basic pci virtual
function, such as qemu virt-pci-9pfs.
Signed-off-by: MaJun <majun258@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Some bsp (eg: buildroot) has defconfig.fragment design to add more
configs into the defconfig in linux source code tree. For example,
we could put different cpu configs into different defconfig.fragments,
but they all use the same defconfig in Linux.
Signed-off-by: Ma Jun <majun258@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
We should give some necessary check for initrd just like other
architectures and it seems that setup_initrd() could be a common
code for all architectures.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
CONFIG_CLKSRC_OF is gone since commit bb0eb050a5
("clocksource/drivers: Rename CLKSRC_OF to TIMER_OF"). The platform
already selects TIMER_OF.
CONFIG_HAVE_DMA_API_DEBUG is gone since commit 6e88628d03 ("dma-debug:
remove CONFIG_HAVE_DMA_API_DEBUG").
CONFIG_DEFAULT_DEADLINE is gone since commit f382fb0bce ("block:
remove legacy IO schedulers").
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Fix wording in help text for the CPU_HAS_LDSTEX symbol.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
During ftrace init, linux will replace all function prologues
(call_mcout) with nops, but it need flush_dcache and
invalidate_icache to make it work. So flush_cache functions
couldn't be nested called by ftrace framework.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Some CPUs don't support icache.va instruction to maintain the whole
smp cores' icache. Using icache.all + IPI casue a lot on performace
and using defer mechanism could reduce the number of calling icache
_flush_all functions.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Only when vma is for VM_EXEC, we need sync dcache & icache. eg:
- gdb ptrace modify user space instruction code area.
Add VM_EXEC condition to reduce unnecessary cache flush.
The abiv1 cpus' cache are all VIPT, so we still need to deal with
dcache aliasing problem. But there is optimized way to use cache
color, just like what's done in arch/csky/abiv1/inc/abi/page.h.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Instead of flushing cache per update_mmu_cache() called, we use
flush_dcache_page to reduce the frequency of flashing the cache.
As abiv2 cpus are all PIPT for icache & dcache, we needn't handle
dcache aliasing problem. But their icache can't snoop dcache, so
we still need sync_icache_dcache in update_mmu_cache().
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
The abiv2 CPUs are all PIPT cache, so there is no need to implement
flush_icache_page function.
The function flush_icache_user_range hasn't been used, so just
remove it.
The function flush_cache_range is not necessary for PIPT cache when
tlb mapping changed.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Some CPUs don't support icache specific instructions to flush icache
lines in broadcast way. We use cpu control registers to flush local
icache and use IPI to notify other cores.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
If we use a non-ipi-support interrupt controller, it will cause panic here.
We should let cpu up and work with CONFIG_SMP, when we use a non-ipi intc.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
In the past, we didn't care about kernel sp when saving pt_reg. But in some
cases, we still need pt_reg->usp to represent the kernel stack before enter
exception.
For cmpxhg in atomic.S, we need save and restore usp for above.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
There is no present bit in csky pmd hardware, so we need to prepare invalid_pte_table
for empty pmd entry and the functions (pmd_none & pmd_present) in pgtable.h need
invalid_pte_talbe to get result. If a module use these functions, we need export the
symbol for it.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: Mo Qihui <qihui.mo@verisilicon.com>
Cc: Zhange Jian <zhang_jian5@dahuatech.com>
After fixaddr_init is separated from highmem, we could use tcm
without highmem selected. (610 (abiv1) don't support highmem,
but it could use tcm now.)
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
The implementation are not only used by TCM but also used by sram on
SOC bus. It follow existed linux tcm software interface, so that old
tcm application codes could be re-used directly.
Software interface list in asm/tcm.h:
- Variables/Const: __tcmdata, __tcmconst
- Functions: __tcmfunc, __tcmlocalfunc
- Malloc/Free: tcm_alloc, tcm_free
In linux menuconfig:
- Choose a TCM contain instrctions + data or separated in ITCM/DTCM.
- Determine TCM_BASE (DTCM_BASE) in phyiscal address.
- Determine size of TCM or ITCM(DTCM) in page counts.
Here is hello tcm example from Documentation/arm/tcm.rst which could
be directly used:
/* Uninitialized data */
static u32 __tcmdata tcmvar;
/* Initialized data */
static u32 __tcmdata tcmassigned = 0x2BADBABEU;
/* Constant */
static const u32 __tcmconst tcmconst = 0xCAFEBABEU;
static void __tcmlocalfunc tcm_to_tcm(void)
{
int i;
for (i = 0; i < 100; i++)
tcmvar ++;
}
static void __tcmfunc hello_tcm(void)
{
/* Some abstract code that runs in ITCM */
int i;
for (i = 0; i < 100; i++) {
tcmvar ++;
}
tcm_to_tcm();
}
static void __init test_tcm(void)
{
u32 *tcmem;
int i;
hello_tcm();
printk("Hello TCM executed from ITCM RAM\n");
printk("TCM variable from testrun: %u @ %p\n", tcmvar, &tcmvar);
tcmvar = 0xDEADBEEFU;
printk("TCM variable: 0x%x @ %p\n", tcmvar, &tcmvar);
printk("TCM assigned variable: 0x%x @ %p\n", tcmassigned, &tcmassigned);
printk("TCM constant: 0x%x @ %p\n", tcmconst, &tcmconst);
/* Allocate some TCM memory from the pool */
tcmem = tcm_alloc(20);
if (tcmem) {
printk("TCM Allocated 20 bytes of TCM @ %p\n", tcmem);
tcmem[0] = 0xDEADBEEFU;
tcmem[1] = 0x2BADBABEU;
tcmem[2] = 0xCAFEBABEU;
tcmem[3] = 0xDEADBEEFU;
tcmem[4] = 0x2BADBABEU;
for (i = 0; i < 5; i++)
printk("TCM tcmem[%d] = %08x\n", i, tcmem[i]);
tcm_free(tcmem, 20);
}
}
TODO:
- Separate fixup mapping from highmem
- Support abiv1
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
This is a basic -fstack-protector support without per-task canary
switching. The protector will report something like when stack
corruption is detected:
It's tested with strcpy local array overflow in sys_kill and get:
stack-protector: Kernel stack is corrupted in: sys_kill+0x23c/0x23c
TODO:
- Support task switch for different cannary
Signed-off-by: Mao Han <han_mao@c-sky.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
- Enable CMA
- Add support for MB v11
- Defconfig updates
- Minor fixes
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCXjlJ1gAKCRDKSWXLKUoM
IWy9AJ4tauV9sUb+zNadrYxI+2zemRstUwCfQ49LG4kHpFCv8ldSTmhBPJY/3MI=
=QpT4
-----END PGP SIGNATURE-----
Merge tag 'microblaze-v5.6-rc1' of git://git.monstr.eu/linux-2.6-microblaze
Pull Microblaze update from Michal Simek:
- enable CMA
- add support for MB v11
- defconfig updates
- minor fixes
* tag 'microblaze-v5.6-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: Add ID for Microblaze v11
microblaze: Prevent the overflow of the start
microblaze: Wire CMA allocator
asm-generic: Make dma-contiguous.h a mandatory include/asm header
microblaze: Sync defconfig with latest Kconfig layout
microblaze: defconfig: Disable EXT2 driver and Enable EXT3 & EXT4 drivers
microblaze: Align comments with register usage
dma-continuguous.h is generic for all architectures except arm32 which has
its own version.
Similar change was done for msi.h by commit a1b39bae16
("asm-generic: Make msi.h a mandatory include/asm header")
Suggested-by: Christoph Hellwig <hch@infradead.org>
Link: https://lore.kernel.org/linux-arm-kernel/20200117080446.GA8980@lst.de/T/#m92bb56b04161057635d4142e1b3b9b6b0a70122e
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Paul Walmsley <paul.walmsley@sifive.com> # for arch/riscv
Here are the big set of tty and serial driver updates for 5.6-rc1
Included in here are:
- dummy_con cleanups (touches lots of arch code)
- sysrq logic cleanups (touches lots of serial drivers)
- samsung driver fixes (wasn't really being built)
- conmakeshash move to tty subdir out of scripts
- lots of small tty/serial driver updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXjFRBg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn2VACgkge7vTeUNeZFc+6F4NWphAQ5tCQAoK/MMbU6
0O8ef7PjFwCU4s227UTv
=6m40
-----END PGP SIGNATURE-----
Merge tag 'tty-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here are the big set of tty and serial driver updates for 5.6-rc1
Included in here are:
- dummy_con cleanups (touches lots of arch code)
- sysrq logic cleanups (touches lots of serial drivers)
- samsung driver fixes (wasn't really being built)
- conmakeshash move to tty subdir out of scripts
- lots of small tty/serial driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (140 commits)
tty: n_hdlc: Use flexible-array member and struct_size() helper
tty: baudrate: SPARC supports few more baud rates
tty: baudrate: Synchronise baud_table[] and baud_bits[]
tty: serial: meson_uart: Add support for kernel debugger
serial: imx: fix a race condition in receive path
serial: 8250_bcm2835aux: Document struct bcm2835aux_data
serial: 8250_bcm2835aux: Use generic remapping code
serial: 8250_bcm2835aux: Allocate uart_8250_port on stack
serial: 8250_bcm2835aux: Suppress register_port error on -EPROBE_DEFER
serial: 8250_bcm2835aux: Suppress clk_get error on -EPROBE_DEFER
serial: 8250_bcm2835aux: Fix line mismatch on driver unbind
serial_core: Remove unused member in uart_port
vt: Correct comment documenting do_take_over_console()
vt: Delete comment referencing non-existent unbind_con_driver()
arch/xtensa/setup: Drop dummy_con initialization
arch/x86/setup: Drop dummy_con initialization
arch/unicore32/setup: Drop dummy_con initialization
arch/sparc/setup: Drop dummy_con initialization
arch/sh/setup: Drop dummy_con initialization
arch/s390/setup: Drop dummy_con initialization
...
Pull scheduler updates from Ingo Molnar:
"These were the main changes in this cycle:
- More -rt motivated separation of CONFIG_PREEMPT and
CONFIG_PREEMPTION.
- Add more low level scheduling topology sanity checks and warnings
to filter out nonsensical topologies that break scheduling.
- Extend uclamp constraints to influence wakeup CPU placement
- Make the RT scheduler more aware of asymmetric topologies and CPU
capacities, via uclamp metrics, if CONFIG_UCLAMP_TASK=y
- Make idle CPU selection more consistent
- Various fixes, smaller cleanups, updates and enhancements - please
see the git log for details"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits)
sched/fair: Define sched_idle_cpu() only for SMP configurations
sched/topology: Assert non-NUMA topology masks don't (partially) overlap
idle: fix spelling mistake "iterrupts" -> "interrupts"
sched/fair: Remove redundant call to cpufreq_update_util()
sched/psi: create /proc/pressure and /proc/pressure/{io|memory|cpu} only when psi enabled
sched/fair: Fix sgc->{min,max}_capacity calculation for SD_OVERLAP
sched/fair: calculate delta runnable load only when it's needed
sched/cputime: move rq parameter in irqtime_account_process_tick
stop_machine: Make stop_cpus() static
sched/debug: Reset watchdog on all CPUs while processing sysrq-t
sched/core: Fix size of rq::uclamp initialization
sched/uclamp: Fix a bug in propagating uclamp value in new cgroups
sched/fair: Load balance aggressively for SCHED_IDLE CPUs
sched/fair : Improve update_sd_pick_busiest for spare capacity case
watchdog: Remove soft_lockup_hrtimer_cnt and related code
sched/rt: Make RT capacity-aware
sched/fair: Make EAS wakeup placement consider uclamp restrictions
sched/fair: Make task_fits_capacity() consider uclamp restrictions
sched/uclamp: Rename uclamp_util_with() into uclamp_rq_util_with()
sched/uclamp: Make uclamp util helpers use and return UL values
...
con_init in tty/vt.c will now set conswitchp to dummy_con if it's unset.
Drop it from arch setup code.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20191218214506.49252-9-nivedita@alum.mit.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the x86 MM code we'd like to untangle various types of historic
header dependency spaghetti, but for this we'd need to pass to
the generic vmalloc code various vmalloc related defines that
customarily come via the <asm/page.h> low level arch header.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by CONFIG_PREEMPT_RT.
Both PREEMPT and PREEMPT_RT require the same functionality which today
depends on CONFIG_PREEMPT.
Switch the entry code over to use CONFIG_PREEMPTION.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Guo Ren <guoren@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20191015191821.11479-7-bigeasy@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- improve dma-debug scalability (Eric Dumazet)
- tiny dma-debug cleanup (Dan Carpenter)
- check for vmap memory in dma_map_single (Kees Cook)
- check for dma_addr_t overflows in dma-direct when using
DMA offsets (Nicolas Saenz Julienne)
- switch the x86 sta2x11 SOC to use more generic DMA code
(Nicolas Saenz Julienne)
- fix arm-nommu dma-ranges handling (Vladimir Murzin)
- use __initdata in CMA (Shyam Saini)
- replace the bus dma mask with a limit (Nicolas Saenz Julienne)
- merge the remapping helpers into the main dma-direct flow (me)
- switch xtensa to the generic dma remap handling (me)
- various cleanups around dma_capable (me)
- remove unused dev arguments to various dma-noncoherent helpers (me)
-----BEGIN PGP SIGNATURE-----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=e5wO
-----END PGP SIGNATURE-----
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux; tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- improve dma-debug scalability (Eric Dumazet)
- tiny dma-debug cleanup (Dan Carpenter)
- check for vmap memory in dma_map_single (Kees Cook)
- check for dma_addr_t overflows in dma-direct when using DMA offsets
(Nicolas Saenz Julienne)
- switch the x86 sta2x11 SOC to use more generic DMA code (Nicolas
Saenz Julienne)
- fix arm-nommu dma-ranges handling (Vladimir Murzin)
- use __initdata in CMA (Shyam Saini)
- replace the bus dma mask with a limit (Nicolas Saenz Julienne)
- merge the remapping helpers into the main dma-direct flow (me)
- switch xtensa to the generic dma remap handling (me)
- various cleanups around dma_capable (me)
- remove unused dev arguments to various dma-noncoherent helpers (me)
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux:
* tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping: (22 commits)
dma-mapping: treat dev->bus_dma_mask as a DMA limit
dma-direct: exclude dma_direct_map_resource from the min_low_pfn check
dma-direct: don't check swiotlb=force in dma_direct_map_resource
dma-debug: clean up put_hash_bucket()
powerpc: remove support for NULL dev in __phys_to_dma / __dma_to_phys
dma-direct: avoid a forward declaration for phys_to_dma
dma-direct: unify the dma_capable definitions
dma-mapping: drop the dev argument to arch_sync_dma_for_*
x86/PCI: sta2x11: use default DMA address translation
dma-direct: check for overflows on 32 bit DMA addresses
dma-debug: increase HASH_SIZE
dma-debug: reorder struct dma_debug_entry fields
xtensa: use the generic uncached segment support
dma-mapping: merge the generic remapping helpers into dma-direct
dma-direct: provide mmap and get_sgtable method overrides
dma-direct: remove the dma_handle argument to __dma_direct_alloc_pages
dma-direct: remove __dma_direct_free_pages
usb: core: Remove redundant vmap checks
kernel: dma-contiguous: mark CMA parameters __initdata/__initconst
dma-debug: add a schedule point in debug_dma_dump_mappings()
...
- clean up various obsolete ioremap and iounmap variants
- add a new generic ioremap implementation and switch csky, nds32 and
riscv over to it
-----BEGIN PGP SIGNATURE-----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=ooiA
-----END PGP SIGNATURE-----
Merge tag 'ioremap-5.5' of git://git.infradead.org/users/hch/ioremap
Pull generic ioremap support from Christoph Hellwig:
"This adds the remaining bits for an entirely generic ioremap and
iounmap to lib/ioremap.c. To facilitate that, it cleans up the giant
mess of weird ioremap variants we had with no users outside the arch
code.
For now just the three newest ports use the code, but there is more
than a handful others that can be converted without too much work.
Summary:
- clean up various obsolete ioremap and iounmap variants
- add a new generic ioremap implementation and switch csky, nds32 and
riscv over to it"
* tag 'ioremap-5.5' of git://git.infradead.org/users/hch/ioremap: (21 commits)
nds32: use generic ioremap
csky: use generic ioremap
csky: remove ioremap_cache
riscv: use the generic ioremap code
lib: provide a simple generic ioremap implementation
sh: remove __iounmap
nios2: remove __iounmap
hexagon: remove __iounmap
m68k: rename __iounmap and mark it static
arch: rely on asm-generic/io.h for default ioremap_* definitions
asm-generic: don't provide ioremap for CONFIG_MMU
asm-generic: ioremap_uc should behave the same with and without MMU
xtensa: clean up ioremap
x86: Clean up ioremap()
parisc: remove __ioremap
nios2: remove __ioremap
alpha: remove the unused __ioremap wrapper
hexagon: clean up ioremap
ia64: rename ioremap_nocache to ioremap_uc
unicore32: remove ioremap_cached
...
These are pure cache maintainance routines, so drop the unused
struct device argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Anshuman Khandual