Make the code a bit easier to read by providing symbolic names
for the reply_type (ACK vs. NAK). Also clean up some brace stuff
while at it.
v2: s/DP_REPLY/DP_SIDEBAND_REPLY/ (DK)
Fix some checkpatch issues
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190122200301.18633-1-ville.syrjala@linux.intel.com
This is only used by drm_irq_install(), which is an optional helper.
For legacy pci devices this is required (due to interrupt sharing without
msi/msi-x), and just making this the default exactly matches the behaviour
of all existing drivers using the drm_irq_install() helpers. In case that
ever becomes wrong drivers can roll their own irq handling, as many
drivers already do (for other reasons like needing a threaded interrupt
handler, or having an entire pile of different interrupt sources).
v2: Rebase
v3: Improve commit message (Emil)
Cc: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129104248.26607-3-daniel.vetter@ffwll.ch
And move the documenation we alreay have into kerneldoc, plus a bit of
polish while at it.
v2:
- Ditch FIXME from commit message, I've resolved that already before
sending out the first version.
- Put the legacy DRIVER_ flags at the end (Sam).
Cc: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129104248.26607-2-daniel.vetter@ffwll.ch
Having the probe helper stuff (which pretty much everyone needs) in
the drm_crtc_helper.h file (which atomic drivers should never need) is
confusing. Split them out.
To make sure I actually achieved the goal here I went through all
drivers. And indeed, all atomic drivers are now free of
drm_crtc_helper.h includes.
v2: Make it compile. There was so much compile fail on arm drivers
that I figured I'll better not include any of the acks on v1.
v3: Massive rebase because i915 has lost a lot of drmP.h includes, but
not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h
there was still one, which this patch largely removes. Which means
rolling out lots more includes all over.
This will also conflict with ongoing drmP.h cleanup by others I
expect.
v3: Rebase on top of atomic bochs.
v4: Review from Laurent for bridge/rcar/omap/shmob/core bits:
- (re)move some of the added includes, use the better include files in
other places (all suggested from Laurent adopted unchanged).
- sort alphabetically
v5: Actually try to sort them, and while at it, sort all the ones I
touch.
v6: Rebase onto i915 changes.
v7: Rebase once more.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: CK Hu <ck.hu@mediatek.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: virtualization@lists.linux-foundation.org
Cc: etnaviv@lists.freedesktop.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: spice-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-tegra@vger.kernel.org
Cc: xen-devel@lists.xen.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190117210334.13234-1-daniel.vetter@ffwll.ch
- Fastset updates to make sure DRRS and PSR are properly enabled (Hans)
- Header include clean-up (Brajeswar, Jani)
- Improvements and clean-up on debugfs (Chris, Jani)
- Avoid division by zero on CNL clocks setup (Xiao)
- Restrict PSMI context load w/a to Haswell GT1 (Chris)
- Remove HW semaphores for gen7 inter-engine sync (Chris)
- Pull the render flush into breadcrumb emission (Chris)
- i915_params copy and free helpers and other reorgs and docs (Jani)
- Remove has_pooled_eu static initializer (Tvrtko)
- Updates on kerneldoc (Chris)
- Remove redundant trailing request flush (Chris)
- ringbuffer irq seqno fixes and clean-up (Chris)
- splitting off runtime device info and other clean-up around (Jani)
- Selftests improvements (Chris, Daniele)
- Flush RING_IMR changes before changing the global GT IMR on gen6 and HSW (Chris)
- Some improvements and fixes around GPU reset and GPU hang report (Chris)
- Remove partial attempt to swizzle on pread/pwrite (Chris)
- Return immediately if trylock fails for direct-reclaim (Chris)
- Downgrade scare message for unknown HuC firmware (Jani)
- ACPI / PMIC for MIPI / DSI (Hans)
- Reduce i915_request_alloc retirement to local context (Chris)
- Init per-engine WAs for all engines (Daniele)
- drop DPF code for gen8+ (Daniele)
- Guard error capture against unpinned vma (Chris)
- Use mutex_lock_killable from inside the shrinker (Chris)
- Removing pooling from struct_mutex from vmap shrinker (Chris)
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJcN9waAAoJEPpiX2QO6xPKW3oH/AkR8oFAcCF8VCYtPHnRUV6F
AsKYG57NMfWH3tfJRg+W5gVtPV+gxOv5IIf6DHjoT2nR0N/r57sGlpKaR4uhq14r
NUK6+cEoNDSDr3zdGt5QI3p8YokEo5MFIVYNPD9THO0hz4uvlzowru1bSC5bJvjn
RvMsb4SUYFMA3BmHNsSczPPVuJLccndl5JFv8oUOrtA5ksct/8G3CI6V2KSOwT7W
ebjrQ56vFMLuDMYwgfrss5sFMoRT60Da0C6dCroHKOzB9L/w7oPOVfwNE9miDRCx
7IRIfICiPTCB2GsJ635sXet2sMV7RFxSjKkDND5iwV2vp96yqAwEjhXJq3t8MCE=
=MqY8
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2019-01-10' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Unwind failure on pinning the gen7 PPGTT (Chris)
- Fastset updates to make sure DRRS and PSR are properly enabled (Hans)
- Header include clean-up (Brajeswar, Jani)
- Improvements and clean-up on debugfs (Chris, Jani)
- Avoid division by zero on CNL clocks setup (Xiao)
- Restrict PSMI context load w/a to Haswell GT1 (Chris)
- Remove HW semaphores for gen7 inter-engine sync (Chris)
- Pull the render flush into breadcrumb emission (Chris)
- i915_params copy and free helpers and other reorgs and docs (Jani)
- Remove has_pooled_eu static initializer (Tvrtko)
- Updates on kerneldoc (Chris)
- Remove redundant trailing request flush (Chris)
- ringbuffer irq seqno fixes and clean-up (Chris)
- splitting off runtime device info and other clean-up around (Jani)
- Selftests improvements (Chris, Daniele)
- Flush RING_IMR changes before changing the global GT IMR on gen6 and HSW (Chris)
- Some improvements and fixes around GPU reset and GPU hang report (Chris)
- Remove partial attempt to swizzle on pread/pwrite (Chris)
- Return immediately if trylock fails for direct-reclaim (Chris)
- Downgrade scare message for unknown HuC firmware (Jani)
- ACPI / PMIC for MIPI / DSI (Hans)
- Reduce i915_request_alloc retirement to local context (Chris)
- Init per-engine WAs for all engines (Daniele)
- drop DPF code for gen8+ (Daniele)
- Guard error capture against unpinned vma (Chris)
- Use mutex_lock_killable from inside the shrinker (Chris)
- Removing pooling from struct_mutex from vmap shrinker (Chris)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Fri 11 Jan 2019 09:58:18 AEST
# gpg: using RSA key FA625F640EEB13CA
# gpg: Good signature from "Rodrigo Vivi <rodrigo.vivi@intel.com>"
# gpg: aka "Rodrigo Vivi <rodrigo.vivi@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6D20 7068 EEDD 6509 1C2C E2A3 FA62 5F64 0EEB 13CA
# Conflicts:
# drivers/gpu/drm/i915/intel_dp.c
# drivers/gpu/drm/i915/intel_drv.h
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114183820.GA2855@intel.com
Reversed logic when writing the original comment, now fixed.
Fixes: e9eafcb589 ("drm: move drm_can_sleep() to drm_util.h")
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190120171217.12508-1-sam@ravnborg.org
Display engine drivers often need to distinguish between different types of
YUV sub-sampling. This introduces helpers to check for common sub-sampling
ratios in their commonly-used denomination from the DRM format info.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-3-paul.kocialkowski@bootlin.com
It is often useful to check whether the DRM format info retrieved from
the DRM framebuffer matches a specific YUV planes disposition.
This introduces helpers to quickly check that a provided format info
matches a YUV format with a specific disposition, in commonly-used
terminology.
The intent of providing helpers taking the format info instead of the
fourcc alone is to avoid the overhead of iterating through all formats
when the whole format info structure is available. As a result, these
helpers are very simple so they are made inline.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-2-paul.kocialkowski@bootlin.com
UAPI Changes:
- New fourcc identifier for ARM Framebuffer Compression v1.3
Cross-subsystem Changes:
Core Changes:
- Reorganisation of drm_device and drm_framebuffer headers
- Cleanup of the drmP inclusion
- Fix leaks in the fb-helpers
- Allow for depth different from bpp in fb-helper fbdev emulation
- Remove drm_mode_object from drm_display_mode
Driver Changes:
- Add reflection properties to rockchip
- a bunch of fixes for virtio
- a bunch of fixes for dp_mst and drivers using it, and introduction of a
new refcounting scheme
- Convertion of bochs to atomic and generic fbdev emulation
- Allow meson to remove the firmware framebuffers
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXD+OHgAKCRDj7w1vZxhR
xe3IAP4s59sFVMZseVJpwSe41OJ1ipD/cyIbtXU94X6nFd6zCAD+Jm4q+XIIS+uv
7ElmJ2BD7rwicqSViWNG8tteHYfjrAU=
=XPsb
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-01-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.1:
UAPI Changes:
- New fourcc identifier for ARM Framebuffer Compression v1.3
Cross-subsystem Changes:
Core Changes:
- Reorganisation of drm_device and drm_framebuffer headers
- Cleanup of the drmP inclusion
- Fix leaks in the fb-helpers
- Allow for depth different from bpp in fb-helper fbdev emulation
- Remove drm_mode_object from drm_display_mode
Driver Changes:
- Add reflection properties to rockchip
- a bunch of fixes for virtio
- a bunch of fixes for dp_mst and drivers using it, and introduction of a
new refcounting scheme
- Convertion of bochs to atomic and generic fbdev emulation
- Allow meson to remove the firmware framebuffers
[airlied: patch rcar-du to add drm_modes.h]
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190116200428.u2n4jbk4mzza7n6e@flea
This switches to drm_atomic_helper_dirtyfb() as the framebuffer dirty
handler. All flushing will now happen in the pipe functions.
Also enable the damage plane property for all except repaper which can
only do full updates.
ili9225:
This change made ili9225_init() equal to mipi_dbi_init() so use it.
v3: Include vblank header (Sam)
ili9225 and st7586 can't use mipi_dbi_enable_flush() (David)
v2: Remove fb check in mipi_dbi_enable_flush() it can't be NULL
(kbuild test robot)
Cc: David Lechner <david@lechnology.com>
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: David Lechner <david@lechnology.com>
Reviewed-by: David Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190115043643.2364-5-noralf@tronnes.org
This prepares for the switch to drm_atomic_helper_dirtyfb() in the next
patch. The damage helper returns a drm_rect so switch to that everywhere
including using a pointer in the dirty functions.
This is a non-functional change except for the debug print which looks a
bit different.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190115043643.2364-4-noralf@tronnes.org
Useful for drivers that only care about the combined damage.
v2: Remove unnecessary clearing of damage clips
Cc: Deepak Rawat <drawat@vmware.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190115043643.2364-3-noralf@tronnes.org
This adds a .fb_create helper that sets the .dirty callback to
drm_atomic_helper_dirtyfb().
v2: Improve docs (Daniel)
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190115043643.2364-2-noralf@tronnes.org
CMA helper drivers have been converted to drm_fbdev_generic_setup()
so the fbdev code can be removed.
v3: Remove CMA specific conditional in the generic fbdev client
v2: Clean up the includes some more (Laurent)
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114121059.20704-1-noralf@tronnes.org
0-DAY reported the following bug:
tree: git://anongit.freedesktop.org/drm/drm-misc drm-misc-next
head: 21376e2c3c
commit: e9eafcb589 [1/2] drm: move drm_can_sleep() to drm_util.h
config: alpha-allmodconfig (attached as .config)
...
In file included from include/linux/irqflags.h:16:0,
from include/drm/drm_util.h:35,
from drivers/gpu/drm/qxl/qxl_cmd.c:28:
>> arch/alpha/include/asm/irqflags.h:58:15: error: unknown type name 'bool'
static inline bool arch_irqs_disabled_flags(unsigned long flags)
^~~~
And later following bug:
tree: git://anongit.freedesktop.org/drm/drm-misc drm-misc-next
head: 21376e2c3c
commit: e9eafcb589 [1/2] drm: move drm_can_sleep() to drm_util.h
config: ia64-allyesconfig (attached as .config)
...
In file included from arch/ia64/include/asm/irqflags.h:14,
from include/linux/irqflags.h:16,
from include/drm/drm_util.h:35,
from drivers/gpu/drm/qxl/qxl_cmd.c:28:
arch/ia64/include/asm/pal.h: In function 'ia64_pal_tr_read':
arch/ia64/include/asm/pal.h:1703:64: error: implicit declaration of function 'ia64_tpa'; did you mean 'ia64_pal'? [-Werror=implicit-function-declaration]
PAL_CALL_PHYS_STK(iprv, PAL_VM_TR_READ, reg_num, tr_type,(u64)ia64_tpa(tr_buffer));
^~~~~~~~
...
So we have a situation where we do not pull in <linux/types.h>
when building for alpha and for ia64 we need even more definitions
are required.
Two invasive fixes where considered:
- Change all declarations of arch_irqs_disabled_flags() to use bool
- Add include of <linux/types.h> to all files that uses bool for
arch_irqs_disabled_flags
To invasive with a too high pain/benefit ratio, so dropped.
They would not cover ia64 either.
Some less invasive fixes was also considered:
- Add include of <linux/types.h> to drm_util.h
- Add include of <linux/interrupt.h> to drm_util.h
The first was dropped as this did not cover the ia64 case.
The latter was considered the best option as there could
be other similar cases and we would like the header files below
include/drm/ to be selfcontained.
So we end up pulling in a lot of stuff not needed, but this is
the price we pay in drm/ because the kernel headers are not all
selfcontained.
While at it, ordred the includefiles in drm_util in alphabetical order.
Build tested with alpha,ia64,arm,x86 with allmodconfig and allyesconfig.
v2:
- fix ia64 build, changed to include interrupt.h
- sort include files alphabetically
Fixes: 733748ac37b45 ("drm: move drm_can_sleep() to drm_util.h")
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190115214845.8117-1-sam@ravnborg.org
This patch finalizes the KMS cleanup task dependency from
drm_display_mode. It removes the use of drm_mode_object
from drm_display_mode struct and it removes the use of
base.id and base.type from drm_display_mode struct
print string.
Signed-off-by: Shayenne Moura <shayenneluzmoura@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/f40e904e665fe3e3ae3ae86e837024bee3b8ca6d.1547214023.git.shayenneluzmoura@gmail.com
On i965gm we need to adjust max_vblank_count dynamically
depending on whether the TV encoder is used or not. To
that end add a per-crtc max_vblank_count that takes
precedence over its device wide counterpart. The driver
can now call drm_crtc_set_max_vblank_count() to configure
the per-crtc value before calling drm_vblank_on().
Also looks like there was some discussion about exynos needing
similar treatment.
v2: Drop the extra max_vblank_count!=0 check for the
WARN(last!=current), will take care of it in i915 code (Daniel)
WARN_ON(!inmodeset) (Daniel)
WARN_ON(dev->max_vblank_count)
Pimp up the docs (Daniel)
Cc: stable@vger.kernel.org
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181127182004.28885-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In the quest to get rid of drmP.h move the newly
added EXPORT_SYMBOL_FOR_TESTS_ONLY to drm_util.h.
Fix the single user.
Add a note to drmP.h to avoid further use of it.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190112193251.20450-3-sam@ravnborg.org
Move drm_can_sleep() out of drmP.h to allow users
to get rid of the drmP.h include.
There was no header file that was a good match for this helper function.
So add this to drm_util with the relevant includes.
Add include of drm_util.h to all users.
v2:
- Update comments to use kernel-doc style (Daniel)
- Add FIXME to drm_can_sleep and add note that this
function should not be used in new code (Daniel)
v3:
- Fix kernel-doc syntax (Daniel)
- Plug drm_util.h into drm-internels.rst (Daniel)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190112193251.20450-2-sam@ravnborg.org
The mode and ajusted_mode passed to the bridge .mode_set() operation
should never be modified by the bridge (and are not in any of the
existing bridge drivers). Make them const to make this clear.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It's not a core function, and the matching atomic functions are also
not in the core. Plus the suspend/resume helper is also already there.
Needs a tiny bit of open-coding, but less midlayer beats that I think.
v2: Rebase onto ast (which gained a new user).
Cc: Sam Bobroff <sbobroff@linux.ibm.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: Rex Zhu <Rex.Zhu@amd.com>
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Shaoyun Liu <Shaoyun.Liu@amd.com>
Cc: Monk Liu <Monk.Liu@amd.com>
Cc: nouveau@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20181217194303.14397-4-daniel.vetter@ffwll.ch
drm-next has been forwarded to 5.0-rc1, and we need it to apply the damage
helper for dirtyfb series from Noralf Trønnes.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
It's a legacy kms only thing, good to hide it better now that all
those old drivers use the legacy crtc helpers directly.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Link: https://patchwork.freedesktop.org/patch/msgid/20181217194303.14397-3-daniel.vetter@ffwll.ch
There has been a TODO waiting for quite a long time in
drm_dp_mst_topology.c:
/* We cannot rely on port->vcpi.num_slots to update
* topology_state->avail_slots as the port may not exist if the parent
* branch device was unplugged. This should be fixed by tracking
* per-port slot allocation in drm_dp_mst_topology_state instead of
* depending on the caller to tell us how many slots to release.
*/
That's not the only reason we should fix this: forcing the driver to
track the VCPI allocations throughout a state's atomic check is
error prone, because it means that extra care has to be taken with the
order that drm_dp_atomic_find_vcpi_slots() and
drm_dp_atomic_release_vcpi_slots() are called in in order to ensure
idempotency. Currently the only driver actually using these helpers,
i915, doesn't even do this correctly: multiple ->best_encoder() checks
with i915's current implementation would not be idempotent and would
over-allocate VCPI slots, something I learned trying to implement
fallback retraining in MST.
So: simplify this whole mess, and teach drm_dp_atomic_find_vcpi_slots()
and drm_dp_atomic_release_vcpi_slots() to track the VCPI allocations for
each port. This allows us to ensure idempotency without having to rely
on the driver as much. Additionally: the driver doesn't need to do any
kind of VCPI slot tracking anymore if it doesn't need it for it's own
internal state.
Additionally; this adds a new drm_dp_mst_atomic_check() helper which
must be used by atomic drivers to perform validity checks for the new
VCPI allocations incurred by a state.
Also: update the documentation and make it more obvious that these
/must/ be called by /all/ atomic drivers supporting MST.
Changes since v9:
* Add some missing changes that were requested by danvet that I forgot
about after I redid all of the kref stuff:
* Remove unnecessary state changes in intel_dp_mst_atomic_check
* Cleanup atomic check logic for VCPI allocations - all we need to check in
compute_config is whether or not this state disables a CRTC, then free
VCPI based off that
Changes since v8:
* Fix compile errors, whoops!
Changes since v7:
- Don't check for mixed stale/valid VCPI allocations, just rely on
connector registration to stop such erroneous modesets
Changes since v6:
- Keep a kref to all of the ports we have allocations on. This required
a good bit of changing to when we call drm_dp_find_vcpi_slots(),
mainly that we need to ensure that we only redo VCPI allocations on
actual mode or CRTC changes, not crtc_state->active changes.
Additionally, we no longer take the registration of the DRM connector
for each port into account because so long as we have a kref to the
port in the new or previous atomic state, the connector will stay
registered.
- Use the small changes to drm_dp_put_port() to add even more error
checking to make misusage of the helpers more obvious. I added this
after having to chase down various use-after-free conditions that
started popping up from the new helpers so no one else has to
troubleshoot that.
- Move some accidental DRM_DEBUG_KMS() calls to DRM_DEBUG_ATOMIC()
- Update documentation again, note that find/release() should both not be
called on the same port in a single atomic check phase (but multiple
calls to one or the other is OK)
Changes since v4:
- Don't skip the atomic checks for VCPI allocations if no new VCPI
allocations happen in a state. This makes the next change I'm about
to list here a lot easier to implement.
- Don't ignore VCPI allocations on destroyed ports, instead ensure that
when ports are destroyed and still have VCPI allocations in the
topology state, the only state changes allowed are releasing said
ports' VCPI. This prevents a state with a mix of VCPI allocations
from destroyed ports, and allocations from valid ports.
Changes since v3:
- Don't release VCPI allocations in the topology state immediately in
drm_dp_atomic_release_vcpi_slots(), instead mark them as 0 and skip
over them in drm_dp_mst_duplicate_state(). This makes it so
drm_dp_atomic_release_vcpi_slots() is still idempotent while also
throwing warnings if the driver messes up it's book keeping and tries
to release VCPI slots on a port that doesn't have any pre-existing
VCPI allocation - danvet
- Change mst_state/state in some debugging messages to "mst state"
Changes since v2:
- Use kmemdup() for duplicating MST state - danvet
- Move port validation out of duplicate state callback - danvet
- Handle looping through MST topology states in
drm_dp_mst_atomic_check() so the driver doesn't have to do it
- Fix documentation in drm_dp_atomic_find_vcpi_slots()
- Move the atomic check for each individual topology state into it's
own function, reduces indenting
- Don't consider "stale" MST ports when calculating the bandwidth
requirements. This is needed because originally we relied on the
state duplication functions to prune any stale ports from the new
state, which would prevent us from incorrectly considering their
bandwidth requirements alongside legitimate new payloads.
- Add function references in drm_dp_atomic_release_vcpi_slots() - danvet
- Annotate atomic VCPI and atomic check functions with __must_check
- danvet
Changes since v1:
- Don't use the now-removed ->atomic_check() for private objects hook,
just give drivers a function to call themselves
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-19-lyude@redhat.com
Changes since v6:
- Move EXPORT_SYMBOL() for drm_dp_mst_topology_state_funcs to this
commit
- Document __drm_dp_mst_state_iter_get() and note that it shouldn't be
called directly
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-18-lyude@redhat.com
The current way of handling refcounting in the DP MST helpers is really
confusing and probably just plain wrong because it's been hacked up many
times over the years without anyone actually going over the code and
seeing if things could be simplified.
To the best of my understanding, the current scheme works like this:
drm_dp_mst_port and drm_dp_mst_branch both have a single refcount. When
this refcount hits 0 for either of the two, they're removed from the
topology state, but not immediately freed. Both ports and branch devices
will reinitialize their kref once it's hit 0 before actually destroying
themselves. The intended purpose behind this is so that we can avoid
problems like not being able to free a remote payload that might still
be active, due to us having removed all of the port/branch device
structures in memory, as per:
commit 91a25e4631 ("drm/dp/mst: deallocate payload on port destruction")
Which may have worked, but then it caused use-after-free errors. Being
new to MST at the time, I tried fixing it;
commit 263efde31f ("drm/dp/mst: Get validated port ref in drm_dp_update_payload_part1()")
But, that was broken: both drm_dp_mst_port and drm_dp_mst_branch structs
are validated in almost every DP MST helper function. Simply put, this
means we go through the topology and try to see if the given
drm_dp_mst_branch or drm_dp_mst_port is still attached to something
before trying to use it in order to avoid dereferencing freed memory
(something that has happened a LOT in the past with this library).
Because of this it doesn't actually matter whether or not we keep keep
the ports and branches around in memory as that's not enough, because
any function that validates the branches and ports passed to it will
still reject them anyway since they're no longer in the topology
structure. So, use-after-free errors were fixed but payload deallocation
was completely broken.
Two years later, AMD informed me about this issue and I attempted to
come up with a temporary fix, pending a long-overdue cleanup of this
library:
commit c54c7374ff ("drm/dp_mst: Skip validating ports during destruction, just ref")
But then that introduced use-after-free errors, so I quickly reverted
it:
commit 9765635b30 ("Revert "drm/dp_mst: Skip validating ports during destruction, just ref"")
And in the process, learned that there is just no simple fix for this:
the design is just broken. Unfortunately, the usage of these helpers are
quite broken as well. Some drivers like i915 have been smart enough to
avoid accessing any kind of information from MST port structures, but
others like nouveau have assumed, understandably so, that
drm_dp_mst_port structures are normal and can just be accessed at any
time without worrying about use-after-free errors.
After a lot of discussion, me and Daniel Vetter came up with a better
idea to replace all of this.
To summarize, since this is documented far more indepth in the
documentation this patch introduces, we make it so that drm_dp_mst_port
and drm_dp_mst_branch structures have two different classes of
refcounts: topology_kref, and malloc_kref. topology_kref corresponds to
the lifetime of the given drm_dp_mst_port or drm_dp_mst_branch in it's
given topology. Once it hits zero, any associated connectors are removed
and the branch or port can no longer be validated. malloc_kref
corresponds to the lifetime of the memory allocation for the actual
structure, and will always be non-zero so long as the topology_kref is
non-zero. This gives us a way to allow callers to hold onto port and
branch device structures past their topology lifetime, and dramatically
simplifies the lifetimes of both structures. This also finally fixes the
port deallocation problem, properly.
Additionally: since this now means that we can keep ports and branch
devices allocated in memory for however long we need, we no longer need
a significant amount of the port validation that we currently do.
Additionally, there is one last scenario that this fixes, which couldn't
have been fixed properly beforehand:
- CPU1 unrefs port from topology (refcount 1->0)
- CPU2 refs port in topology(refcount 0->1)
Since we now can guarantee memory safety for ports and branches
as-needed, we also can make our main reference counting functions fix
this problem by using kref_get_unless_zero() internally so that topology
refcounts can only ever reach 0 once.
Changes since v4:
* Change the kernel-figure summary for dp-mst/topology-figure-1.dot a
bit - danvet
* Remove figure numbers - danvet
Changes since v3:
* Remove rebase detritus - danvet
* Split out purely style changes into separate patches - hwentlan
Changes since v2:
* Fix commit message - checkpatch
* s/)-1/) - 1/g - checkpatch
Changes since v1:
* Remove forward declarations - danvet
* Move "Branch device and port refcounting" section from documentation
into kernel-doc comments - danvet
* Export internal topology lifetime functions into their own section in
the kernel-docs - danvet
* s/@/&/g for struct references in kernel-docs - danvet
* Drop the "when they are no longer being used" bits from the kernel
docs - danvet
* Modify diagrams to show how the DRM driver interacts with the topology
and payloads - danvet
* Make suggested documentation changes for
drm_dp_mst_topology_get_mstb() and drm_dp_mst_topology_get_port() -
danvet
* Better explain the relationship between malloc refs and topology krefs
in the documentation for drm_dp_mst_topology_get_port() and
drm_dp_mst_topology_get_mstb() - danvet
* Fix "See also" in drm_dp_mst_topology_get_mstb() - danvet
* Rename drm_dp_mst_topology_get_(port|mstb)() ->
drm_dp_mst_topology_try_get_(port|mstb)() and
drm_dp_mst_topology_ref_(port|mstb)() ->
drm_dp_mst_topology_get_(port|mstb)() - danvet
* s/should/must in docs - danvet
* WARN_ON(refcount == 0) in topology_get_(mstb|port) - danvet
* Move kdocs for mstb/port structs inline - danvet
* Split drm_dp_get_last_connected_port_and_mstb() changes into their own
commit - danvet
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-7-lyude@redhat.com
Move the CEA-861 QS bit handling entirely into the edid code. No
need to bother the drivers with this.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: Eric Anholt <eric@anholt.net> (supporter:DRM DRIVERS FOR VC4)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108172828.15184-4-ville.syrjala@linux.intel.com
Make life easier for drivers by simply passing the connector
to drm_hdmi_avi_infoframe_from_display_mode() and
drm_hdmi_avi_infoframe_quant_range(). That way drivers don't
need to worry about is_hdmi2_sink mess.
v2: Make is_hdmi2_sink() return true for sil-sii8620
Adapt to omap/vc4 changes
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108172828.15184-1-ville.syrjala@linux.intel.com
With all dependencies fixed we can now remove
drmP.h from drm_gem_cma_helper.h.
It is replaced by the include files required,
or forward declarations as appropritate.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108192939.15255-13-sam@ravnborg.org
No further changes required.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108192939.15255-8-sam@ravnborg.org
drmP.h is an relic from the days when there was a single header file.
To enable the removal of drmP.h from all users drop include
of drmP.h from bridge/dw_hdmi.h.
A few files relied on the file included in drmP.h - add explicit
include statements or forward declarations to these files.
Build tested with arm and x86.
v2:
- prefer forward declarations when possible (Laurent Pinchart)
- sort include files (Laurent Pinchart)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108192939.15255-7-sam@ravnborg.org
Add forward declaration and pull in include
file to make drm_framebuffer.h self contained.
While add it order include files alphabetically.
The use of TASK_COMM_LEN is the reason for including sched.h.
I could not see any good way to avoid this dependency,
and users of drm_framebuffer.comm already use
TASK_COMM_LEN to check for length etc.
v2:
- Added forward declaration of drm_gem_object (Noralf)
- Added ack from Noralf
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108192939.15255-4-sam@ravnborg.org
Move DRM_SWITCH_POWER out of drmP.h to allow users
to get rid of the drmP include.
Moved to drm_device.h because drm_device.switch_power_state
is the only user.
Converted to enum and added sparse kerneldoc comments.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108192939.15255-3-sam@ravnborg.org
Updated comment style to kernel-doc format in drm_device.h
In struct drm_device there are 12 struct members without doc:
- registered
- filelist_mutex
- filelist
- irq
- vbl_lock
- event_lock
- hose
- sigdata
- sigdata.context
- sigdata.lock
- agp_buffer_map
- agp_buffer_token
They all need proper documentation, a task left for someone
that knows their usage.
drm_device is not plugged into Documentation/gpu/drm-internals.rst
as this would create a new load of warnings.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108192939.15255-2-sam@ravnborg.org
UAPI Changes:
Cross-subsystem Changes:
- Turn dma-buf fence sequence numbers into 64 bit numbers
Core Changes:
- Move to a common helper for the DP MST hotplug for radeon, i915 and
amdgpu
- i2c improvements for drm_dp_mst
- Removal of drm_syncobj_cb
- Introduction of an helper to create and attach the TV margin properties
Driver Changes:
- Improve cache flushes for v3d
- Reflection support for vc4
- HDMI overscan support for vc4
- Add implicit fencing support for rockchip and sun4i
- Switch to generic fbdev emulation for virtio
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXDOTqAAKCRDj7w1vZxhR
xZ8QAQD4j8m9Ea3bzY5Rr8BYUx1k+Cjj6Y6abZmot2rSvdyOHwD+JzJFIFAPZjdd
uOKhLnDlubaaoa6OGPDQShjl9p3gyQE=
=WQGO
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-01-07-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.1:
UAPI Changes:
Cross-subsystem Changes:
- Turn dma-buf fence sequence numbers into 64 bit numbers
Core Changes:
- Move to a common helper for the DP MST hotplug for radeon, i915 and
amdgpu
- i2c improvements for drm_dp_mst
- Removal of drm_syncobj_cb
- Introduction of an helper to create and attach the TV margin properties
Driver Changes:
- Improve cache flushes for v3d
- Reflection support for vc4
- HDMI overscan support for vc4
- Add implicit fencing support for rockchip and sun4i
- Switch to generic fbdev emulation for virtio
Signed-off-by: Dave Airlie <airlied@redhat.com>
[airlied: applied amdgpu merge fixup]
From: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190107180333.amklwycudbsub3s5@flea
Generally catch up with 5.0-rc1, and specifically get the changes:
96d4f267e4 ("Remove 'type' argument from access_ok() function")
0b2c8f8b6b ("i915: fix missing user_access_end() in page fault exception case")
594cc251fd ("make 'user_access_begin()' do 'access_ok()'")
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
-----BEGIN PGP SIGNATURE-----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=Jnao
-----END PGP SIGNATURE-----
Merge tag 'topic/drmp-cleanup-2019-01-02' of git://anongit.freedesktop.org/drm/drm-intel into drm-intel-next-queued
Make some drm headers self-contained with includes and forward
declarations.
This topic branch has already been merged to drm-misc-next as commit
1c95f662fc ("Merge tag 'topic/drmp-cleanup-2019-01-02' of
git://anongit.freedesktop.org/drm/drm-intel into drm-misc-next"). Now
merge it to drm-intel-next-queued to unblock some further drmP.h cleanup
without having to wait for a backmerge.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87pntfl6pa.fsf@intel.com
-----BEGIN PGP SIGNATURE-----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=Jnao
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXDNznAAKCRDj7w1vZxhR
xQQZAP9mge2KtO8ZApoXbo230EeOs+7z12VM6Y6dMgMRqhnRmgEAso0bqMzDl5rI
pBapyqsMIuN2prQZSXHi7r/C6AS4uwI=
=WFPo
-----END PGP SIGNATURE-----
Merge tag 'topic/drmp-cleanup-2019-01-02' of git://anongit.freedesktop.org/drm/drm-intel into drm-misc-next
Make some drm headers self-contained with includes and forward declarations
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
# gpg: Signature made Wed 02 Jan 2019 10:47:51 AM CET
# gpg: using RSA key 1565A65B77B0632E1124E59CD398079D26ABEE6F
# gpg: Can't check signature: No public key
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87pntfl6pa.fsf@intel.com
drm_syncobj.h uses struct drm_file pointers, forward declare struct
drm_file to make the header self-contained. This prepares for dropping
drmP.h from files including drm_syncobj.h.
Switch from "" to <> includes while at it.
v2: forward declare instead of including drm_file.h (Daniel)
[Updated commit message per Laurent's review while applying.]
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181228082815.10797-1-jani.nikula@intel.com
drm_hdcp.h uses kernel integer types, make it self-contained by
including linux/kernel.h. This prepares for dropping drmP.h from files
including drm_hdcp.h.
[Updated commit message per Laurent's review while applying.]
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/adfc79941e827b49eb6186f317cbeff0fb365f33.1545915059.git.jani.nikula@intel.com
drm_file.h embeds idr structures in DRM-specific structures. Include the
corresponding header to make drm_file.h self-contained. Make it easier
to drop drmP.h includes.
[Updated commit message per Laurent's review while applying.]
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2818b15332ab562722dfc324cf977b7eb4a04401.1545915059.git.jani.nikula@intel.com
intel-gtt.h uses kernel and agp pointers, make it self-contained by
including the relevant headers. This prepares for dropping drmP.h from
files including intel-gtt.h.
[Updated commit message per Laurent's review while applying.]
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9414800f89d6f326c6e9173233bf6c4dee254d9a.1545915059.git.jani.nikula@intel.com
Un-inline drm_legacy_findmap() to not depend on struct drm_device
definition within drm_legacy.h, so that a forward declaration suffices.
Also include drm_hashtab.h in drm_legacy.h to make it more
self-contained. Make it easier to drop drmP.h includes.
v2: avoid including drm_device.h by un-inlining (Daniel)
[Updated commit message per Laurent's review while applying.]
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181228130446.22141-1-jani.nikula@intel.com
Move DRM_IF_VERSION out of drmP.h to allow users
to get rid of the drmP include.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181226210353.13993-1-sam@ravnborg.org
TV margins properties can only be added as part of the SDTV TV
connector properties creation, but we might need those props for HDMI
TVs too, so let's move the margins props creation in a separate
function and expose it to drivers.
We also add an helper to attach margins props to a connector.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181206142439.10441-4-boris.brezillon@bootlin.com
Ville Syrjälä