Commit Graph

41 Commits

Author SHA1 Message Date
Uwe Kleine-König a0386bba70
spi: make remove callback a void function
The value returned by an spi driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)

So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Claudius Heine <ch@denx.de>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Acked-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Acked-by: Łukasz Stelmach <l.stelmach@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220123175201.34839-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-09 13:00:45 +00:00
Uwe Kleine-König b4a0de29f0 mtd: sst25l: Warn about failure to unregister mtd device
mtd_device_unregister() shouldn't fail. Wail loudly if it does anyhow.

This matches how other drivers (e.g. nand/raw/nandsim.c) use
mtd_device_unregister().

By returning 0 in the spi remove callback a generic error message by the
spi framework (and nothing else) is suppressed.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211108093153.63792-4-u.kleine-koenig@pengutronix.de
2021-12-03 14:27:19 +01:00
Thomas Gleixner 8d36fe1e9e treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 420
Based on 1 normalized pattern(s):

  this code is free software you can redistribute it and or modify it
  under the terms of the gnu general public license version 2 as
  published by the free software foundation

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 6 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190113.627158185@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:37:15 +02:00
Rafał Miłecki 39675caa06 mtd: sst25l: use mtd_device_register()
This driver doesn't specify parsers so it can use that little helper.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-07-18 16:32:38 +02:00
Boris Brezillon e7bfb3fdbd mtd: Stop updating erase_info->state and calling mtd_erase_callback()
MTD users are no longer checking erase_info->state to determine if the
erase operation failed or succeeded. Moreover, mtd_erase_callback() is
now a NOP.

We can safely get rid of all mtd_erase_callback() calls and all
erase_info->state assignments. While at it, get rid of the
erase_info->state field, all MTD_ERASE_XXX definitions and the
mtd_erase_callback() function.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Bert Kenward <bkenward@solarflare.com>
---
Changes in v2:
- Address a few coding style issues (reported by Miquel)
- Remove comments that are no longer valid (reported by Miquel)
2018-03-21 09:50:56 +01:00
Linus Torvalds 02f0d3f758 MTD updates for 4.4-rc1:
Core
 
   * WARN (in some cases) when a struct mtd_info is registered multiple times;
     in the past this was "supported", but it's still error prone for future
     development. There's only one ugly case of this left in the tree (that
     we're aware of) and the owners are aware of the problems there.
 
   * fix potential deadlock in the blkdev removal path
     NOTE: the (potential) deadlock was introduced in a for-stable patch. This
     one is also marked for -stable.
 
   * ioctl(BLKPG) compat_ioctl support; resolves issues with 32-bit user space
     vs. 64-bit kernel space
 
   * Set MTD parent device correctly throughout the tree, so the tree structure
     appears correctly in sysfs; many drivers were missing this (soft)
     requirement
 
   * Move device tree partitions (ofpart) into a dedicated 'partitions' subnode;
     this helps to disambiguate whether a node is a partition or some other
     auxiliary data
 
   * Improve error handling for partitioning failures
 
  NAND
 
   * General: Increase timeout period, for corner-case systems with
     less-than-accurate jiffies
 
   * Fix OF-based autoloading of several NAND drivers when built as modules
 
   * pxa3xx_nand:
     - Rework timing configuration to be more dynamic
     - Refactor PM support
 
   * brcmnand: prepare for NorthStar 2 support (ARM64, 16-bit NAND chips)
 
   * sunxi_nand: refactoring and a few bug fixes
 
   * vf610: new NAND driver
 
   * FSMC: add SW BCH support; support common NAND DT bindings
 
   * lpc32xx_slc: refactor and improve timing calculations logic
 
   * denali: support for rev 5.1
 
  SPI NOR
 
   * Layering improvements
 
   * Added Winbond lock/unlock support
 
   * Added mtd_is_locked() (i.e., ioctl(MEMISLOCKED)) support
 
   * Increase full-chip-erase timeout linearly with flash size
 
   * fsl-quadspi: fix compile for non-ARM architectures
 
   * New flash support
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWPPj0AAoJEFySrpd9RFgtJEgP/RnfXRHBX51cUl4r8XrxiGtz
 zlH5zFOCYWEOtlGjoD25wp+A5RRjWi62At6KmLJZncf0clJ65fyKHjt/JEg6YuI6
 DUTMepTwyC2Wh7Ux1ZEH3KOnl64xh5p+Wf7Tl4yUr0DCd26VEwE9o7tPRlahv9nx
 OhGCWS+uSsxW0Q2wDLCypFzXsnDBeoGxDO7VCIzle4d3aJ4PCcQIXINlr6ZYpocT
 VTTadPCMsmYq6AgV5W3KYGYLj62ITiN2YxdJRacg+QkKLfl21u2wVy9Ahk/oj5TG
 bV0DHiz6ky1F2K/bvJibcRFABiYup9UXIo1IzwLloSxEJ/GfennMC29xn9K/0gid
 e2kO/Ajh/bihgJXzoAoZD/40YJK40X5VW9rQZgo482sMBGLmJOzZiOHOIEXaVohs
 djQ7sbCwPmLwqp7C+6WTn8frp6ntIe9iXdmjDuR/WlPP0Sh5rI3cUeBQrJXEYxwc
 aYt1Zxkst6gEMPQJ/S2TiKwWm0BxVWEUEjKmt9FPWOaQnwmoeju0Y/6jIvs1TQKM
 vO8cmS17QyPUWT2kGIDmZ51KayY26uDC8/NA2t1HDYCiFbpDp61kgu2wyoBUTg7q
 YIAvjtnwOaG9qk0SLfZu4FEgNi4a/bC1bxGxChsi+S2krpNQAeMlPY394cf6OdsE
 j+CV/Ko0DguO26bO0MWr
 =UzSW
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20151106' of git://git.infradead.org/linux-mtd

Pull MTD updates from Brian Norris:
 "Core:

   - WARN (in some cases) when a struct mtd_info is registered multiple
     times; in the past this was "supported", but it's still error prone
     for future development.  There's only one ugly case of this left in
     the tree (that we're aware of) and the owners are aware of the
     problems there.

   - fix potential deadlock in the blkdev removal path NOTE: the
     (potential) deadlock was introduced in a for-stable patch.  This
     one is also marked for -stable.

   - ioctl(BLKPG) compat_ioctl support; resolves issues with 32-bit user
     space vs 64-bit kernel space

   - Set MTD parent device correctly throughout the tree, so the tree
     structure appears correctly in sysfs; many drivers were missing
     this (soft) requirement

   - Move device tree partitions (ofpart) into a dedicated 'partitions'
     subnode; this helps to disambiguate whether a node is a partition
     or some other auxiliary data

   - Improve error handling for partitioning failures

  NAND:

   - General: Increase timeout period, for corner-case systems with
     less-than-accurate jiffies

   - Fix OF-based autoloading of several NAND drivers when built as
     modules

   - pxa3xx_nand:
      - Rework timing configuration to be more dynamic
      - Refactor PM support

   - brcmnand: prepare for NorthStar 2 support (ARM64, 16-bit NAND
     chips)

   - sunxi_nand: refactoring and a few bug fixes

   - vf610: new NAND driver

   - FSMC: add SW BCH support; support common NAND DT bindings

   - lpc32xx_slc: refactor and improve timing calculations logic

   - denali: support for rev 5.1

  SPI NOR:

   - Layering improvements

   - Added Winbond lock/unlock support

   - Added mtd_is_locked() (i.e., ioctl(MEMISLOCKED)) support

   - Increase full-chip-erase timeout linearly with flash size

   - fsl-quadspi: fix compile for non-ARM architectures

   - New flash support"

* tag 'for-linus-20151106' of git://git.infradead.org/linux-mtd: (169 commits)
  mtd: don't WARN about overloaded users of mtd->reboot_notifier.notifier_call
  mtd: nand: sunxi: avoid retrieving data before ECC pass
  mtd: nand: sunxi: fix sunxi_nfc_hw_ecc_read/write_chunk()
  mtd: blkdevs: fix potential deadlock + lockdep warnings
  mtd: ofpart: move ofpart partitions to a dedicated dt node
  doc: dt: mtd: support partitions in a special 'partitions' subnode
  mtd: brcmnand: Force 8bit mode before doing nand_scan_ident()
  mtd: brcmnand: factor out CFG and CFG_EXT bitfields
  mtd: mtdpart: Do not fail mtd probe when parsing partitions fails
  mtd: fsl-quadspi: fix macro collision problems with READ/WRITE
  mtd: warn when registering the same master many times
  mtd: fixup corner case error handling in mtd_device_parse_register()
  mtd: tests: Replace timeval with ktime_t
  mtd: fsmc_nand: Add BCH4 SW ECC support for SPEAr600
  mtd: nand: vf610_nfc: use nand_check_erased_ecc_chunk() helper
  mtd: nand: increase ready wait timeout and report timeouts
  mtd: docg3: off by one in doc_register_sysfs()
  mtd: pxa3xx_nand: clean up the pxa3xx timings
  mtd: pxa3xx_nand: rework flash detection and timing setup
  mtd: pxa3xx_nand: add helpers to setup the timings
  ...
2015-11-06 11:50:24 -08:00
Andrew F. Davis 3821a065f5 spi: Drop owner assignment from spi_drivers
An spi_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-28 10:30:17 +09:00
Frans Klaver 90b997527e mtd: devices: sst251: show parent device in sysfs
Fix a bug where mtd parent device symlinks aren't shown in sysfs.

While at it, make use of the default owner value set by mtdcore.

Signed-off-by: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13 09:21:16 -07:00
Paul Gortmaker 3ea5b037e7 mtd: delete non-required instances of include <linux/init.h>
None of these files are actually using any __init type directives
and hence don't need to include <linux/init.h>.  Most are just a
left over from __devinit and __cpuinit removal, or simply due to
code getting copied from one driver to the next.

Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
[Brian: dropped one incorrect hunk]
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-03-10 22:42:22 -07:00
Sachin Kamat b38be28814 mtd: sst25l: Use devm_kzalloc
devm_kzalloc is device managed and makes code simpler.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06 23:32:48 -08:00
Sachin Kamat fcfd9f2dd7 mtd: sst25l: Remove redundant spi_set_drvdata
Driver core will set the driver data to NULL upon detach
or probe failure.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06 23:32:48 -08:00
Jingoo Han 0278fd3fa3 mtd: devices: use dev_get_platdata()
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-30 21:34:31 +01:00
Jingoo Han 1594908ac0 mtd: sst25l: use spi_get_drvdata() and spi_set_drvdata()
Use the wrapper functions for getting and setting the driver data using
spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we
can directly pass a struct spi_device.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-05 19:05:37 +01:00
Bill Pemberton 810b7e060c mtd: remove use of __devexit
CONFIG_HOTPLUG is going away as an option so __devexit is no
longer needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-22 12:07:03 +02:00
Bill Pemberton 042a190944 mtd: remove use of __devinitdata
CONFIG_HOTPLUG is going away as an option so __devinitdata is no
longer needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-22 12:07:03 +02:00
Bill Pemberton 06f2551069 mtd: remove use of __devinit
CONFIG_HOTPLUG is going away as an option so __devinit is no longer
needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-22 12:07:03 +02:00
Bill Pemberton 5153b88cac mtd: remove use of __devexit_p
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer
needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-22 12:07:02 +02:00
Artem Bityutskiy 42d7fbe223 mtd: do not use plain 0 as NULL
The first 3 arguments of 'mtd_device_parse_register()' are pointers,
but many callers pass '0' instead of 'NULL'. Fix this globally. Thanks
to coccinelle for making it easy to do with the following semantic patch:

 @@
 expression mtd, types, parser_data, parts, nr_parts;
 @@
 (
 -mtd_device_parse_register(mtd, 0, parser_data, parts, nr_parts)
 +mtd_device_parse_register(mtd, NULL, parser_data, parts, nr_parts)
 |
 -mtd_device_parse_register(mtd, types, 0, parts, nr_parts)
 +mtd_device_parse_register(mtd, types, NULL, parts, nr_parts)
 |
 -mtd_device_parse_register(mtd, types, parser_data, 0, nr_parts)
 +mtd_device_parse_register(mtd, types, parser_data, NULL, nr_parts)
 )

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-03-27 00:53:20 +01:00
Artem Bityutskiy bcb1d23871 mtd: move zero length verification to MTD API functions
In many places in drivers we verify for the zero length, but this is very
inconsistent across drivers. This is obviously the right thing to do, though.
This patch moves the check to the MTD API functions instead and removes a lot
of duplication.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-03-27 00:32:19 +01:00
Artem Bityutskiy 834247ec7e mtd: remove retlen zeroing duplication
The MTD API function now zero the 'retlen' parameter before calling
the driver's method — do not do this again in drivers. This removes
duplicated '*retlen = 0' assignent from the following methods:

    'mtd_point()'
    'mtd_read()'
    'mtd_write()'
    'mtd_writev()'
    'mtd_panic_write()'

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-03-27 00:29:34 +01:00
Artem Bityutskiy 5def48982b mtd: do not duplicate length and offset checks in drivers
We already verify that offset and length are within the MTD device size
in the MTD API functions. Let's remove the duplicated checks in drivers.
This patch only affects the following API's:

'mtd_erase()'
'mtd_point()'
'mtd_unpoint()'
'mtd_get_unmapped_area()'
'mtd_read()'
'mtd_write()'
'mtd_panic_write()'
'mtd_lock()'
'mtd_unlock()'
'mtd_is_locked()'
'mtd_block_isbad()'
'mtd_block_markbad()'

This patch adds a bit of noise by removing too sparse empty lines, but this is
not too bad.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-03-27 00:28:18 +01:00
Artem Bityutskiy c4cc625ea5 mtd: sst25l: initialize writebufsize
The writebufsize concept was introduce by commit
"0e4ca7e mtd: add writebufsize field to mtd_info struct" and it represents
the maximum amount of data the device writes to the media at a time. This is
an important parameter for UBIFS which is used during recovery and which
basically defines how big a corruption caused by a power cut can be.

Set writebufsize to the flash page size because it is the maximum amount of
data it writes at a time.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: stable@kernel.org [2.6.38+]
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-03-27 00:23:22 +01:00
Artem Bityutskiy 3c3c10bba1 mtd: add leading underscore to all mtd functions
This patch renames all MTD functions by adding a "_" prefix:

mtd->erase -> mtd->_erase
mtd->read_oob -> mtd->_read_oob
...

The reason is that we are re-working the MTD API and from now on it is
an error to use MTD function pointers directly - we have a corresponding
API call for every pointer. By adding a leading "_" we achieve the following:

1. Make sure we convert every direct pointer users
2. A leading "_" suggests that this interface is internal and it becomes
   less likely that people will use them directly
3. Make sure all the out-of-tree modules stop compiling and the owners
   spot the big API change and amend them.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-03-27 00:20:01 +01:00
Axel Lin c9d1b75293 mtd: convert drivers/mtd/* to use module_spi_driver()
This patch converts the drivers in drivers/mtd/* to use the
module_spi_driver() macro which makes the code smaller and a bit simpler.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-03-27 00:16:18 +01:00
Artem Bityutskiy d81a32f2c1 mtd: sst25l: kill unused variable
Fix the following gcc warning:
drivers/mtd/devices/sst25l.c: In function ‘sst25l_probe’:
drivers/mtd/devices/sst25l.c:381:11: warning: unused variable ‘i’ [-Wunused-variable]

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09 18:26:01 +00:00
Lars-Peter Clausen 5d3667eee4 mtd: Remove redundant spi driver bus initialization
In ancient times it was necessary to manually initialize the bus field of an
spi_driver to spi_bus_type. These days this is done in spi_driver_register(),
so we can drop the manual assignment.

The patch was generated using the following coccinelle semantic patch:
// <smpl>
@@
identifier _driver;
@@
struct spi_driver _driver = {
	.driver = {
-		.bus = &spi_bus_type,
	},
};
// </smpl>

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09 18:07:31 +00:00
Brian Norris 289c052221 mtd: replace DEBUG() with pr_debug()
Start moving away from the MTD_DEBUG_LEVEL messages. The dynamic
debugging feature is a generic kernel feature that provides more
flexibility.

(See Documentation/dynamic-debug-howto.txt)

Also fix some punctuation, indentation, and capitalization that went
along with the affected lines.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11 15:02:16 +03:00
Dmitry Eremin-Solenikov 81939afce2 mtd: sst25l.c: use mtd_device_parse_register
Replace custom invocations of parse_mtd_partitions and mtd_device_register
with common mtd_device_parse_register call. This would bring: standard
handling of all errors, fallback to default partitions, etc.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-09-11 15:02:05 +03:00
Dmitry Eremin-Solenikov adaf2a5d08 mtd: sst25l don't specify default parsing options
Since 'cmdline, NULL' is now a default for parse_mtd_partitions, don't specify
this in every driver, instead pass NULL to force parse_mtd_partitions
to use default.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-09-11 15:01:59 +03:00
Ryan Mallon 1c5454eed8 Change Ryan Mallon's email address across the kernel
I no longer work at Bluewater Systems. Update my email address accordingly. I
have deleted my email address from C files rather than change it. This
was suggested by several people, since the commit from my new email
address will cause scripts/get_maintainer.pl to function properly. I
have not added the .mailmap entry as suggested by Joe because I think
it is no longer necessary if I touch all the files which had my name
in them.

Signed-off-by: Ryan Mallon <rmallon@gmail.com>
Cc: Andre Renaud <andre@bluewatersys.com>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Andrew Victor <avictor.za@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Anton Vorontsov <cbou@mail.ru>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Liam Girdwood <lrg@ti.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Joe Perches <joe@perches.com>
Cc: Jesper Juhl <jj@chaosbits.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: trivial@kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-16 11:22:05 +02:00
Jamie Iles 98b3979b92 mtd: sst25l: convert to mtd_device_register()
Convert to mtd_device_register() and remove the check for
mtd_has_partitions() as we always have partitioning enabled now.

Signed-off-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-25 02:21:33 +01:00
Mike Frysinger 61cc8276fa mtd: sst25l: fix section markings
The previous section mismatch fix for this driver wasn't entirely correct.
The sst25l_flash_info array is now used in the devinit probe func, but is
marked as initdata, so building results in the warning:

WARNING: drivers/mtd/devices/sst25l.o(.devinit.text): Section mismatch
	in reference from the function sst25l_probe()
	to the variable .init.data:sst25l_flash_info

Further, the remove func should be devexit rather than exit to match the
probe func.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-25 02:02:57 +01:00
Fabio Estevam 6b2995b62e mtd: fix section mismatch on sst25l
Building the kernel with 'make CONFIG_DEBUG_SECTION_MISMATCH=y´

resulted in:

WARNING: vmlinux.o(.data+0x15938): Section mismatch in reference from
the variable sst25l_driver to the function .init.text:sst25l_probe()
The variable sst25l_driver references
the function __init sst25l_probe()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

Fix the section mismatch.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-12-03 16:34:55 +00:00
Dan Carpenter a4b81ca509 mtd: sst25l: check for null consistently
The rest of the function assumes that "data" can be null.  I don't know
the code well enough to say whether it can actually be null, but there
is no harm in checking here.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-02 09:00:45 +01:00
H Hartley Sweeten 0ffe0ce36e mtd: sst25l: fix multi-part messages with broken spi masters
Some SPI masters (ep93xx) have limitations when using the SFRMOUT
signal for the spi device chip select.  The SFRMOUT signal is
only asserted as long as the spi transmit fifo contains data.  As
soon as the last bit is clocked into the receive fifo it gets
deasserted.

The functions sst25l_status and sst25l_match_device use the API
function spi_write_then_read to write a command to the flash then
read the response back.  This API function creates a two part spi
message for the write then read.  When this message is transferred
the SFRMOUT signal ends up getting deasserted after the command
phase.  This causes the command to get aborted by the device so
the read phase returns invalid data.

By changing sst25l_status and sst25l_match_device to use a single
transfer synchronous message, the SFRMOUT signal stays asserted
during the entire message so the correct data always gets returned.

This change will have no effect on SPI masters which use a chip
select mechanism (GPIO's, etc.) which does stay asserted correctly.
As a bonus, the single transfer synchronous messages complete faster
than multi-part messages.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-05-14 01:52:24 +01:00
David Woodhouse 0ae28a35bc Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:
	drivers/mtd/mtdcore.c

Pull in the bdi fixes and ARM platform changes that other outstanding
patches depend on.
2010-05-10 14:32:46 +01:00
H Hartley Sweeten 29da3380de mtd: sst25l: remove unnecessary MTD_DEBUG_LEVEL2 messages
All the SST25L series flash parts have uniform erase sectors.  Remove
the extra MTD_DEBUG_LEVEL2 messages showing the eraseregions info
since they could never be shown.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-05-10 14:27:08 +01:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Alexey Dobriyan d43c36dc6b headers: remove sched.h from interrupt.h
After m68k's task_thread_info() doesn't refer to current,
it's possible to remove sched.h from interrupt.h and not break m68k!
Many thanks to Heiko Carstens for allowing this.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-10-11 11:20:58 -07:00
Jiri Slaby 2eaaa5ff87 mtd: sst25l, fix lock imbalance
Add an omitted unlock to one sst25l_erase fail path.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-19 10:56:53 -07:00
Ryan Mallon ec77e21b91 mtd: SST25L (non JEDEC) SPI Flash driver
Add support for the non JEDEC SST25L SPI Flash devices.

[dwmw2: Some cleanups]

Signed-off-by: Andre Renaud <andre@bluewatersys.com>
Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: "H Hartley Sweeten" <hartleys@visionengravers.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-19 10:54:45 -07:00