This patch moves the rsb hash table handling to atomic flag operations.
The flag operations for DLM_RTF_SHRINK are protected by
ls->ls_rsbtbl[b].lock. However we switch to atomic ops if new possible
flags will be used in a different way and don't assume such lock
dependencies.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will move the lkb_flags value to the recently introduced
lkb_iflags value. For lkb_iflags we use atomic bit operations because
some flags like DLM_IFL_CB_PENDING are used while non rsb lock is held
to avoid issues with other flag manipulations which might run at the
same time we switch to atomic bit operations. Snapshot the bit values to
an uint32_t value is only used for debugging/logging use cases and don't
need to be 100% correct.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Currently manipulating lkb_dflags assumes to held the rsb lock assigned
to the lkb. This is held by dlm message processing after certain
time to lookup the right rsb from the received lkb message id. For user
space locks flags, which is currently the only use case for lkb_dflags,
flags are also being set during dlm character device handling without
holding the rsb lock. To minimize the risk that bit operations are
getting corrupted we switch to atomic bit operations. This patch will
also introduce helpers to snapshot atomic bit values in an non atomic
way. There might be still issues with the flag handling e.g. running in
case of manipulating bit ops and snapshot them at the same time, but this
patch minimize them and will start to use atomic bit operations.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch stores lkb distributed flags value in an separate value
instead of sharing internal and distributed flags in lkb->lkb_flags value.
This has the advantage to not mask/write back flag values in
receive_flags() functionality. The dlm debug_fs does not provide the
distributed flags anymore, those can be added in future.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The DLM_IFL_LOCAL_MS flag is an internal non shared flag but used in
m_flags of dlm messages. It is not shared because it is only used for
local messaging. Instead using DLM_IFL_LOCAL_MS in dlm messages we pass a
parameter around to signal local messaging or not. This patch is adding
the local parameter to signal local messaging.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch renames DLM_IFL_STUB_MS to DLM_IFL_LOCAL_MS flag. The
DLM_IFL_STUB_MS flag is somewhat misnamed, it means the dlm message is
used for local message transfer only. It is used by recovery to resolve
lock states if a node got fenced.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch removes code parts which was declared deprecated by
commit 6b0afc0cc3 ("fs: dlm: don't use deprecated timeout features by
default"). This contains the following dlm functionality:
- start a cancel of a dlm request did not complete after certain timeout:
The current way how dlm cancellation works and interfering with other
dlm requests triggered by the user can end in an overlapping and
returning in -EBUSY. The most user don't handle this case and are
unaware that DLM can return such errno in such situation. Due the
timeout the user are mostly unaware when this happens.
- start a netlink warning messages for user space if dlm requests did
not complete after certain timeout:
This feature was never being built in the only known dlm user space side.
As we are to remove the timeout cancellation feature we can directly
remove this feature as well.
There might be the possibility to bring the timeout cancellation feature
back. However the current way of handling the -EBUSY case which is only
a software limitation and not a hardware limitation should be changed.
We minimize the current code base in DLM cancellation feature to not have
to deal with those existing features while solving the DLM cancellation
feature in general.
UAPI define DLM_LSFL_TIMEWARN is commented as deprecated and reserved
value. We should avoid at first to give it a new meaning but let
possible users still compile by keeping this define. In far future we
can give this flag a new meaning. The same for the DLM_LKF_TIMEOUT lock
request flag.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will add the WQ_UNBOUND flag to the lowcomms dlm_io workqueue
which handles socket io handling to send and receive dlm messages.
The amount of sockets will be 2 for a 3 node cluster. Each socket has
two different workers for doing send and receive work by calling socket
API functionality. Each worker will do their task in order to send dlm
messages in a ordered stream based socket communication. On receive
side the receive buffer will be queued up for an ordered dlm_process
workqueue to parse received dlm messages. The parsing need to be done
currently in an ordered synchronized way because the dlm message processing
is not being made to parse parallel.
After explaining all those workqueue behaviours in lowcomms, the dlm_io
workqueue is only being used for socket handling. Each socket handling
has 2 workers (send and receive). In a 3 cluster node we will end up
with 4 workers. Without the WQ_UNBOUND flag the workers are tight to a
CPU and can never switch, this could be an advantage because local CPU
execution. However with dlm_locktorture testcase I expierenced not all
workers are always in use and my assumption is that some workers are
bound to the same CPU. We should always send or receive when we are
ready to do so, one reason why we disable nigel algorithm on sockets.
We should be safe to do the socket io handling on any CPU which can be
switched during runtime. There is no assumption that the worker stays on
the same CPU. There is no need to respect any workqueue concurrency
model that each worker can only run on one CPU. Lowcomms queue_work()
mechanism has an higher level flag to be sure that it can't schedule
work if the previous worker did not signal it to keep ordered socket
handling. Therefore this patch sets the WQ_UNBOUND flag to allow workers
being executed by any available CPU.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch introduce a new internal flag per lkb value to handle
internal flags which are handled not on wire. The current lkb internal
flags stored as lkb->lkb_flags are split in upper and lower bits, the
lower bits are used to share internal flags over wire for other cluster
wide lkb copies on other nodes.
In commit 61bed0baa4 ("fs: dlm: use a non-static queue for callbacks")
we introduced a new internal flag for pending callbacks for the dlm
callback queue. This flag is protected by the lkb->lkb_cb_lock lock.
This patch overlooked that on dlm receive path and the mentioned upper
and lower bits, that dlm will read the flags, mask it and write it
back. As example receive_flags() in fs/dlm/lock.c. This flag
manipulation is not done atomically and is not protected by
lkb->lkb_cb_lock. This has unknown side effects of the current callback
handling.
In future we should move to set/clear/test bit functionality and avoid
read, mask and writing back flag values. In later patches we will move
the upper parts to the new introduced internal lkb flags which are not
shared between other cluster nodes to the new non shared internal flag
field to avoid similar issues.
Cc: stable@vger.kernel.org
Fixes: 61bed0baa4 ("fs: dlm: use a non-static queue for callbacks")
Reported-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Here is the large set of driver core changes for 6.3-rc1.
There's a lot of changes this development cycle, most of the work falls
into two different categories:
- fw_devlink fixes and updates. This has gone through numerous review
cycles and lots of review and testing by lots of different devices.
Hopefully all should be good now, and Saravana will be keeping a
watch for any potential regression on odd embedded systems.
- driver core changes to work to make struct bus_type able to be moved
into read-only memory (i.e. const) The recent work with Rust has
pointed out a number of areas in the driver core where we are
passing around and working with structures that really do not have
to be dynamic at all, and they should be able to be read-only making
things safer overall. This is the contuation of that work (started
last release with kobject changes) in moving struct bus_type to be
constant. We didn't quite make it for this release, but the
remaining patches will be finished up for the release after this
one, but the groundwork has been laid for this effort.
Other than that we have in here:
- debugfs memory leak fixes in some subsystems
- error path cleanups and fixes for some never-able-to-be-hit
codepaths.
- cacheinfo rework and fixes
- Other tiny fixes, full details are in the shortlog
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/ipdg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynL3gCgwzbcWu0So3piZyLiJKxsVo9C2EsAn3sZ9gN6
6oeFOjD3JDju3cQsfGgd
=Su6W
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.3-rc1.
There's a lot of changes this development cycle, most of the work
falls into two different categories:
- fw_devlink fixes and updates. This has gone through numerous review
cycles and lots of review and testing by lots of different devices.
Hopefully all should be good now, and Saravana will be keeping a
watch for any potential regression on odd embedded systems.
- driver core changes to work to make struct bus_type able to be
moved into read-only memory (i.e. const) The recent work with Rust
has pointed out a number of areas in the driver core where we are
passing around and working with structures that really do not have
to be dynamic at all, and they should be able to be read-only
making things safer overall. This is the contuation of that work
(started last release with kobject changes) in moving struct
bus_type to be constant. We didn't quite make it for this release,
but the remaining patches will be finished up for the release after
this one, but the groundwork has been laid for this effort.
Other than that we have in here:
- debugfs memory leak fixes in some subsystems
- error path cleanups and fixes for some never-able-to-be-hit
codepaths.
- cacheinfo rework and fixes
- Other tiny fixes, full details are in the shortlog
All of these have been in linux-next for a while with no reported
problems"
[ Geert Uytterhoeven points out that that last sentence isn't true, and
that there's a pending report that has a fix that is queued up - Linus ]
* tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits)
debugfs: drop inline constant formatting for ERR_PTR(-ERROR)
OPP: fix error checking in opp_migrate_dentry()
debugfs: update comment of debugfs_rename()
i3c: fix device.h kernel-doc warnings
dma-mapping: no need to pass a bus_type into get_arch_dma_ops()
driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place
Revert "driver core: add error handling for devtmpfs_create_node()"
Revert "devtmpfs: add debug info to handle()"
Revert "devtmpfs: remove return value of devtmpfs_delete_node()"
driver core: cpu: don't hand-override the uevent bus_type callback.
devtmpfs: remove return value of devtmpfs_delete_node()
devtmpfs: add debug info to handle()
driver core: add error handling for devtmpfs_create_node()
driver core: bus: update my copyright notice
driver core: bus: add bus_get_dev_root() function
driver core: bus: constify bus_unregister()
driver core: bus: constify some internal functions
driver core: bus: constify bus_get_kset()
driver core: bus: constify bus_register/unregister_notifier()
driver core: remove private pointer from struct bus_type
...
Core
----
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used
to describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols
---------
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP
path manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF
---
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key
to better support decap on GRE tunnel devices not operating
in collect metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk
and bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols
by livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter
---------
- Remove the CLUSTERIP target. It has been marked as obsolete
for years, and we still have WARN splats wrt. races of
the out-of-band /proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to
the existing 'delete' commands, but do not return an error if
the referenced object (set, chain, rule...) did not exist.
Driver API
----------
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into multiple
files, drop some of the unnecessarily granular locks and factor out
common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless Extensions
for Wi-Fi 7 devices at all. Everyone should switch to using nl80211
interface instead.
- Improve the CAN bit timing configuration. Use extack to return error
messages directly to user space, update the SJW handling, including
the definition of a new default value that will benefit CAN-FD
controllers, by increasing their oscillator tolerance.
New hardware / drivers
----------------------
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers
-------
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- enetc: support XDP_REDIRECT for XDP non-linear buffers
- enetc: improve reconfig, avoid link flap and waiting for idle
- enetc: support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=xXhC
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used to
describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on
boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols:
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF:
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
better support decap on GRE tunnel devices not operating in collect
metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk and
bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols by
livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter:
- Remove the CLUSTERIP target. It has been marked as obsolete for
years, and we still have WARN splats wrt races of the out-of-band
/proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to the
existing 'delete' commands, but do not return an error if the
referenced object (set, chain, rule...) did not exist.
Driver API:
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into
multiple files, drop some of the unnecessarily granular locks and
factor out common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless
Extensions for Wi-Fi 7 devices at all. Everyone should switch to
using nl80211 interface instead.
- Improve the CAN bit timing configuration. Use extack to return
error messages directly to user space, update the SJW handling,
including the definition of a new default value that will benefit
CAN-FD controllers, by increasing their oscillator tolerance.
New hardware / drivers:
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers:
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- support XDP_REDIRECT for XDP non-linear buffers
- improve reconfig, avoid link flap and waiting for idle
- support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q,
8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation"
* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
page_pool: add a comment explaining the fragment counter usage
net: ethtool: fix __ethtool_dev_mm_supported() implementation
ethtool: pse-pd: Fix double word in comments
xsk: add linux/vmalloc.h to xsk.c
sefltests: netdevsim: wait for devlink instance after netns removal
selftest: fib_tests: Always cleanup before exit
net/mlx5e: Align IPsec ASO result memory to be as required by hardware
net/mlx5e: TC, Set CT miss to the specific ct action instance
net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
net/mlx5: Refactor tc miss handling to a single function
net/mlx5: Kconfig: Make tc offload depend on tc skb extension
net/sched: flower: Support hardware miss to tc action
net/sched: flower: Move filter handle initialization earlier
net/sched: cls_api: Support hardware miss to tc action
net/sched: Rename user cookie and act cookie
sfc: fix builds without CONFIG_RTC_LIB
sfc: clean up some inconsistent indentings
net/mlx4_en: Introduce flexible array to silence overflow warning
net: lan966x: Fix possible deadlock inside PTP
net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
...
This patch set fixes some races in the lowcomms startup and shutdown code
that were found by targetted stress testing that quickly and repeatedly
joins and leaves lockspaces.
-----BEGIN PGP SIGNATURE-----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=4Def
-----END PGP SIGNATURE-----
Merge tag 'dlm-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
"This fixes some races in the lowcomms startup and shutdown code that
were found by targeted stress testing that quickly and repeatedly
joins and leaves lockspaces"
* tag 'dlm-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
fs: dlm: remove unnecessary waker_up() calls
fs: dlm: move state change into else branch
fs: dlm: remove newline in log_print
fs: dlm: reduce the shutdown timeout to 5 secs
fs: dlm: make dlm sequence id more robust
fs: dlm: wait until all midcomms nodes detect version
fs: dlm: ignore unexpected non dlm opts msgs
fs: dlm: bring back previous shutdown handling
fs: dlm: send FIN ack back in right cases
fs: dlm: move sending fin message into state change handling
fs: dlm: don't set stop rx flag after node reset
fs: dlm: fix race setting stop tx flag
fs: dlm: be sure to call dlm_send_queue_flush()
fs: dlm: fix use after free in midcomms commit
fs: dlm: start midcomms before scand
fs/dlm: Remove "select SRCU"
fs: dlm: fix return value check in dlm_memory_init()
The uevent() callback in struct kset_uevent_ops does not modify the
kobject passed into it, so make the pointer const to enforce this
restriction. When doing so, fix up all existing uevent() callbacks to
have the correct signature to preserve the build.
Cc: Christine Caulfield <ccaulfie@redhat.com>
Cc: David Teigland <teigland@redhat.com>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230111113018.459199-17-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The wake_up() is already handled inside of midcomms_node_reset() when
switching the state to CLOSED state. So there is not need to call it
after midcomms_node_reset() again.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Currently we can switch at first into DLM_CLOSE_WAIT state and then do
another state change if a condition is true. Instead of doing two state
changes we handle the other state change inside an else branch of this
condition.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
There is an API difference between log_print() and other printk()s to
put a newline or not. This one was introduced by mistake because
log_print() adds a newline.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
When a shutdown is stuck, time out after 5 seconds instead of
3 minutes. After this timeout we try a forced shutdown.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
When joining a new lockspace, use a random number to initialize
a sequence number used in messages. This makes it easier to detect
sequence number mismatches in message replies during tests that
repeatedly join and leave a lockspace.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The current dlm version detection is very complex due to backwards
compatablilty with earlier dlm protocol versions. It takes some time to
detect if a peer node has a specific DLM version. If it's not detected,
we just cut the socket connection. There could be cases where the local
node has not detected the version yet, but the peer node has. In these
cases, we are trying to shutdown the dlm connection with a FIN/ACK message
exchange to be sure the other peer is ready to shutdown the connection on
dlm application level. However this mechanism is only available on DLM
protocol version 3.2 and we need to be sure the DLM version is detected
before.
To make it more robust we introduce a a "best effort" wait to wait for the
version detection before shutdown the dlm connection. This need to be
done before the kthread recoverd for recovery handling is stopped,
because recovery handling will trigger enough messages to have a version
detection going on.
It is a corner case which was detected by modprobe dlm_locktroture module
and rmmod dlm_locktorture module directly afterwards (in a looping
behaviour). In practice probably nobody would leave a lockspace immediately
after joining it.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch ignores unexpected RCOM_NAMES/RCOM_STATUS messages.
To be backwards compatible, those messages are not part of the new
reliable DLM OPTS encapsulation header, and have their own
retransmit handling using sequence number matching When we get
unexpected non dlm opts messages, we should allow them and let
RCOM message handling filter them out using sequence numbers.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch mostly reverts commit 4f567acb0b ("fs: dlm: remove socket
shutdown handling"). There can be situations where the dlm midcomms nodes
hash and lowcomms connection hash are not equal, but we need to guarantee
that the lowcomms are all closed on a last release of a dlm lockspace,
when a shutdown is invoked. This patch guarantees that we always close
all sockets managed by the lowcomms connection hash, and calls shutdown
for the last message sent. This ensures we don't cut the socket, which
could cause the peer to get a connection reset.
In future we should try to merge the midcomms/lowcomms hashes into one
hash and not handle both in separate hashes.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch moves to send a ack back for receiving a FIN message only
when we are in valid states. In other cases and there might be a sender
waiting for a ack we just let it timeout at the senders time and
hopefully all other cleanups will remove the FIN message on their
sending queue. As an example we should never send out an ACK being in
LAST_ACK state or we cannot assume a working socket communication when
we are in CLOSED state.
Cc: stable@vger.kernel.org
Fixes: 489d8e559c ("fs: dlm: add reliable connection if reconnect")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch moves the send fin handling, which should appear in a specific
state change, into the state change handling while the per node
state_lock is held. I experienced issues with other messages because
we changed the state and a fin message was sent out in a different state.
Cc: stable@vger.kernel.org
Fixes: 489d8e559c ("fs: dlm: add reliable connection if reconnect")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Similar to the stop tx flag, the rx flag should warn about a dlm message
being received at DLM_FIN state change, when we are assuming no other
dlm application messages. If we receive a FIN message and we are in the
state DLM_FIN_WAIT2 we call midcomms_node_reset() which puts the
midcomms node into DLM_CLOSED state. Afterwards we should not set the
DLM_NODE_FLAG_STOP_RX flag any more. This patch changes the setting
DLM_NODE_FLAG_STOP_RX in those state changes when we receive a FIN
message and we assume there will be no other dlm application messages
received until we hit DLM_CLOSED state.
Cc: stable@vger.kernel.org
Fixes: 489d8e559c ("fs: dlm: add reliable connection if reconnect")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch sets the stop tx flag before we commit the dlm message.
This flag will report about unexpected transmissions after we
send the DLM_FIN message out, which should be the last message sent.
When we commit the dlm fin message, it could be that we already
got an ack back and the CLOSED state change already happened.
We should not set this flag when we are in CLOSED state. To avoid this
race we simply set the tx flag before the state change can be in
progress by moving it before dlm_midcomms_commit_mhandle().
Cc: stable@vger.kernel.org
Fixes: 489d8e559c ("fs: dlm: add reliable connection if reconnect")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
If we release a midcomms node structure, there should be nothing left
inside the dlm midcomms send queue. However, sometimes this is not true
because I believe some DLM_FIN message was not acked... if we run
into a shutdown timeout, then we should be sure there is no pending send
dlm message inside this queue when releasing midcomms node structure.
Cc: stable@vger.kernel.org
Fixes: 489d8e559c ("fs: dlm: add reliable connection if reconnect")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The scand kthread can send dlm messages out, especially dlm remove
messages to free memory for unused rsb on other nodes. To send out dlm
messages, midcomms must be initialized. This patch moves the midcomms
start before scand is started.
Cc: stable@vger.kernel.org
Fixes: e7fd41792f ("[DLM] The core of the DLM for GFS2/CLVM")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
As suggested by Cong, introduce a tracepoint for all ->sk_data_ready()
callback implementations. For example:
<...>
iperf-609 [002] ..... 70.660425: sk_data_ready: family=2 protocol=6 func=sock_def_readable
iperf-609 [002] ..... 70.660436: sk_data_ready: family=2 protocol=6 func=sock_def_readable
<...>
Suggested-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The file locking definitions have lived in fs.h since the dawn of time,
but they are only used by a small subset of the source files that
include it.
Move the file locking definitions to a new header file, and add the
appropriate #include directives to the source files that need them. By
doing this we trim down fs.h a bit and limit the amount of rebuilding
that has to be done when we make changes to the file locking APIs.
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Howells <dhowells@redhat.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: Steve French <stfrench@microsoft.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Now that the SRCU Kconfig option is unconditionally selected, there is
no longer any point in selecting it. Therefore, remove the "select SRCU"
Kconfig statements.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: David Teigland <teigland@redhat.com>
It should check 'cb_cache', after calling kmem_cache_create("dlm_cb").
Fixes: 61bed0baa4 ("fs: dlm: use a non-static queue for callbacks")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Since moving to memalloc_nofs_save/restore, SUNRPC has stopped setting the
GFP_NOIO flag on sk_allocation which the networking system uses to decide
when it is safe to use current->task_frag. The results of this are
unexpected corruption in task_frag when SUNRPC is involved in memory
reclaim.
The corruption can be seen in crashes, but the root cause is often
difficult to ascertain as a crashing machine's stack trace will have no
evidence of being near NFS or SUNRPC code. I believe this problem to
be much more pervasive than reports to the community may indicate.
Fix this by having kernel users of sockets that may corrupt task_frag due
to reclaim set sk_use_task_frag = false. Preemptively correcting this
situation for users that still set sk_allocation allows them to convert to
memalloc_nofs_save/restore without the same unexpected corruptions that are
sure to follow, unlikely to show up in testing, and difficult to bisect.
CC: Philipp Reisner <philipp.reisner@linbit.com>
CC: Lars Ellenberg <lars.ellenberg@linbit.com>
CC: "Christoph Böhmwalder" <christoph.boehmwalder@linbit.com>
CC: Jens Axboe <axboe@kernel.dk>
CC: Josef Bacik <josef@toxicpanda.com>
CC: Keith Busch <kbusch@kernel.org>
CC: Christoph Hellwig <hch@lst.de>
CC: Sagi Grimberg <sagi@grimberg.me>
CC: Lee Duncan <lduncan@suse.com>
CC: Chris Leech <cleech@redhat.com>
CC: Mike Christie <michael.christie@oracle.com>
CC: "James E.J. Bottomley" <jejb@linux.ibm.com>
CC: "Martin K. Petersen" <martin.petersen@oracle.com>
CC: Valentina Manea <valentina.manea.m@gmail.com>
CC: Shuah Khan <shuah@kernel.org>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: David Howells <dhowells@redhat.com>
CC: Marc Dionne <marc.dionne@auristor.com>
CC: Steve French <sfrench@samba.org>
CC: Christine Caulfield <ccaulfie@redhat.com>
CC: David Teigland <teigland@redhat.com>
CC: Mark Fasheh <mark@fasheh.com>
CC: Joel Becker <jlbec@evilplan.org>
CC: Joseph Qi <joseph.qi@linux.alibaba.com>
CC: Eric Van Hensbergen <ericvh@gmail.com>
CC: Latchesar Ionkov <lucho@ionkov.net>
CC: Dominique Martinet <asmadeus@codewreck.org>
CC: Ilya Dryomov <idryomov@gmail.com>
CC: Xiubo Li <xiubli@redhat.com>
CC: Chuck Lever <chuck.lever@oracle.com>
CC: Jeff Layton <jlayton@kernel.org>
CC: Trond Myklebust <trond.myklebust@hammerspace.com>
CC: Anna Schumaker <anna@kernel.org>
CC: Steffen Klassert <steffen.klassert@secunet.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch uses assert_spin_locked() instead of lockdep_is_held()
where it's available to use because lockdep_is_held() is only available
if CONFIG_LOCKDEP is set.
In other cases like lockdep_sock_is_held() we surround it by a
CONFIG_LOCKDEP idef.
Fixes: dbb751ffab ("fs: dlm: parallelize lowcomms socket handling")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch is rework of lowcomms handling, the main goal was here to
handle recvmsg() and sendpage() to run parallel. Parallel in two senses:
1. per connection and 2. that recvmsg()/sendpage() doesn't block each
other.
Currently recvmsg()/sendpage() cannot run parallel because two
workqueues "dlm_recv" and "dlm_send" are ordered workqueues. That means
only one work item can be executed. The amount of queue items will be
increased about the amount of nodes being inside the cluster. The current
two workqueues for sending and receiving can also block each other if the
same connection is executed at the same time in dlm_recv and dlm_send
workqueue because a per connection mutex for the socket handling.
To make it more parallel we introduce one "dlm_io" workqueue which is
not an ordered workqueue, the amount of workers are not limited. Due
per connection flags SEND/RECV pending we schedule workers ordered per
connection and per send and receive task. To get rid of the mutex
blocking same workers to do socket handling we switched to a semaphore
which handles socket operations as read lock and sock releases as write
operations, to prevent sock_release() being called while the socket is
being used.
There might be more optimization removing the semaphore and replacing it
with other synchronization mechanism, however due other circumstances
e.g. othercon behaviour it seems complicated to doing this change. I
added comments to remove the othercon handling and moving to a different
synchronization mechanism as this is done. We need to do that to the next
dlm major version upgrade because it is not backwards compatible with the
current connect mechanism.
The processing of dlm messages need to be still handled by a ordered
workqueue. An dlm_process ordered workqueue was introduced which gets
filled by the receive worker. This is probably the next bottleneck of
DLM but the application can't currently parse dlm messages parallel. A
comment was introduced to lift the workqueue context of dlm processing
in a non-sleepable softirq to get messages processing done fast.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch removes a init of an error value to -EINVAL which is not
necessary.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch changes the handling of calling the original
sk_error_report() by not putting it on the stack and calling it later.
If the listen_sock.sk_error_report() is NULL in this moment it indicates
a bug in our implementation.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch removes null checks on private data for sockets. If we have a
null dereference there we having a bug in our implementation that such
callback occurs in this state.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch merges the dlm_node_addrs lookup list to the connection
structure. It is a per node mapping to some configuration setup by
configfs. We don't need two lookup structures. The connection hash has
now a lifetime like the dlm_node_addrs entries. Means we add only new
entries when configure cluster and not while new connections are coming
in, remove connection when a node got fenced and cleanup all connection
when the dlm exits. It should work the same and even will show more
issues because we don't try to somehow keep those two data structures in
sync with the current cluster configuration.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch removes to allocate the dlm_local_addr[] pointers on the
heap. Instead we directly store the type of "struct sockaddr_storage".
This removes function deinit_local() because it was freeing memory only.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch removes save_listen_callbacks() and add_listen_sock() as they
are only used once in lowcomms functionality. For shutdown lowcomms it's
not necessary to whole flush the workqueues to synchronize with
restoring the old sk_data_ready() callback. Only the listen con receive
work need to be cancelled. For each individual node shutdown we should be
sure that last ack was been transmitted which is done by flushing per
connection swork worker.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Since commit 489d8e559c ("fs: dlm: add reliable connection if
reconnect") we have functionality like TCP offers for half-closed
sockets on dlm application protocol layer. This feature is required
because the cluster manager events about leaving resource memberships
can be locally already occurred but other cluster nodes having a pending
leaving membership over the cluster manager protocol happening. In this
time the local dlm node already shutdown it's connection and don't
transmit anymore any new dlm messages, but however it still needs to be
able to accept dlm messages because the pending leave membership request
of the cluster manager protocol which the dlm kernel implementation has
no control about it.
We have this functionality on the application for two reasons, the main
reason is that SCTP does not support such functionality on socket
layer. But we can do it inside application layer.
Another small issue is that this feature is broken in the TCP world
because some NAT devices does not implement such functionality
correctly. This is the same reason why the reliable connection session
layer in DLM exists. We give up on middle devices in the networking
which sends e.g. TCP resets out. In DLM we cannot have any message
dropping and we ensure it over a session layer that it can't happen.
Back to the half-closed grace shutdown handling. It's not necessary
anymore to do it on socket layer (which is only support for TCP sockets)
because we do it on application layer. This patch removes this handling,
if there are still issues then we have a problem on the application
layer for such handling.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will switch from dlm_allow_conn to check if dlm lowcomms is
running or not to if we actually have a listen socket set or not. The
list socket will be set and unset in lowcomms start and shutdown
functionality. To synchronize with data_ready() callback we will set the
socket callback to NULL while socket lock is held.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Instead of check on list_empty() we can do the same with
list_first_entry_or_null() and return NULL if the returned value is NULL.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch removed a twice INIT_WORK() functionality. We already doing
this inside of dlm_lowcomms_init() functionality which is called only
once dlm is loaded.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch introduces leftovers of init, start, stop and exit
functionality. The dlm application layer should always call the midcomms
layer which getting aware of such event and redirect it to the lowcomms
layer. Some functionality which is currently handled inside the start
functionality of midcomms and lowcomms should be handled in the init
functionality as it only need to be initialized once when dlm is loaded.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
In DLM when we send a dlm message it is easy to add the lock resource
name, but additional lookup is required when to trace the receive
message side. The idea here is to move the lookup work to the user by
using a lookup to find the right send message with recv message. As note
DLM can't drop any message which is guaranteed by a special session
layer.
For doing the lookup a 3 tupel is required as an unique identification
which is dst nodeid, src nodeid and sequence number. This patch adds the
destination nodeid to the dlm message trace points. The source nodeid is
given by the h_nodeid field inside the header.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch renames DLM_IFL_NEED_SCHED to DLM_IFL_CB_PENDING because
CB_PENDING is a proper name to describe this flag. This flag is set when
callback enqueue will return DLM_ENQUEUE_CALLBACK_NEED_SCHED because the
callback worker need to be queued. The flag tells that callbacks are
currently pending to be called and will be unset if the callback work
for the specific lkb is done. The term need schedule is part of this
time but a proper name is to say that there are some callbacks pending
to being called.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch changes the ast hotpath functionality in very unlikely cases
that we do WARN_ON_ONCE() instead of WARN_ON() to not spamming the
console output if we run into states that it would occur over and over
again.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will drop the lkb reference in an very unlikely case which
should in practice not happened. However if it happens we cleanup the
reference just in case.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
To not get the console spammed about WARN_ON() of invalid states in the
dlm midcomms hot path handling we switch to WARN_ON_ONCE() to get it
only once that there might be an issue with the midcomms state handling.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will fix a small issue when printing out that
dlm_midcomms_start() failed to start and it was printing out that the
dlm subcomponent lowcomms was failed but lowcomms is behind the midcomms
layer.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will catch a possible dlm_add_member() and delivers it to the
dlm recovery handling.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch drops additionally the sock_mutex when there is a sending
message burst. Since we have acknowledge handling we free sending
buffers only when we receive an ack back, but if we are stuck in
send_to_sock() looping because dlm sends a lot of messages and we never
leave the loop the sending buffer fill up very quickly. We can't receive
during this iteration because the sock_mutex is held. This patch will
unlock the sock_mutex so it should be possible to receive messages when
a burst of sending messages happens. This will allow to free up memory
because acks which are already received can be processed.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch removes the ls_remove_wait waitqueue handling. The current
handling tries to wait before a lookup is send out for a identically
resource name which is going to be removed. Hereby the remove message
should be send out before the new lookup message. The reason is that
after a lookup request and response will actually use the specific
remote rsb. A followed remove message would delete the rsb on the remote
side but it's still being used.
To reach a similar behaviour we simple send the remove message out while
the rsb lookup lock is held and the rsb is removed from the toss list.
Other find_rsb() calls would never have the change to get a rsb back to
live while a remove message will be send out (without holding the lock).
This behaviour requires a non-sleepable context which should be provided
now and might be the reason why it was not implemented so in the first
place.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch allows to give the use control about the allocation context
based on a per message basis. Currently all messages forced to be
created under GFP_NOFS context.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will introducde a queue implementation for callbacks by using
the Linux lists. The current callback queue handling is implemented by a
static limit of 6 entries, see DLM_CALLBACKS_SIZE. The sequence number
inside the callback structure was used to see if the entries inside the
static entry is valid or not. We don't need any sequence numbers anymore
with a dynamic datastructure with grows and shrinks during runtime to
offer such functionality.
We assume that every callback will be delivered to the DLM user if once
queued. Therefore the callback flag DLM_CB_SKIP was dropped and the
check for skipping bast was moved before worker handling and not skip
while the callback worker executes. This will reduce unnecessary queues
of the callback worker.
All last callback saves are pointers now and don't need to copied over.
There is a reference counter for callback structures which will care
about to free the callback structures at the right time if they are not
referenced anymore.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch moves the debugging information of the last cast and bast
time when calling the last and bast function call.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
There is no need to use a mutex in those hot path sections. We change it
to spin lock to serve callbacks more faster by not allowing schedule.
The locked sections will not be locked for a long time.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch converts the ls_cb_mutex mutex to a spinlock, there is no
sleepable context when this lock is held.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Instead of using list_entry() this patch moves to using the
list_first_entry() macro.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
We should allow dlm_add_cb() to call queue_work() only after the
recovery queued pending for delayed lkbs. This patch will move the
switch LSFL_CB_DELAY after the delayed lkb work was processed.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds tracepoints for send and recv cases of dlm messages and
dlm rcom messages. In case of send and dlm message we add the dlm rsb
resource name this dlm messages belongs to. This has the advantage to
follow dlm messages on a per lock basis. In case of recv message the
resource name can be extracted by follow the send message sequence
number.
The dlm message DLM_MSG_PURGE doesn't belong to a lock request and will
not set the resource name in a dlm_message trace. The same for all rcom
messages.
There is additional handling required for this debugging functionality
which is tried to be small as possible. Also the midcomms layer gets
aware of lock resource names, for now this is required to make a
connection between sequence number and lock resource names. It is for
debugging purpose only.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
To allow more than just dereferencing the inner header we directly point
to the inner dlm packet which allows us to dereference the header, rcom
or message structure.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch removes the send repeat remove handling. This handling is
there to repeatingly DLM_MSG_REMOVE messages in cases the dlm stack
thinks it was not received at the first time. In cases of message drops
this functionality is necessary, but since the DLM midcomms layer
guarantees there are no messages drops between cluster nodes this
feature became not strict necessary anymore. Due message
delays/processing it could be that two send_repeat_remove() are sent out
while the other should be still on it's way. We remove the repeat remove
handling because we are sure that the message cannot be dropped due
communication errors.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch fixes a race if we get two times an socket data ready event
while the listen connection worker is queued. Currently it will be
served only once but we need to do it (in this case twice) until we hit
-EAGAIN which tells us there is no pending accept going on.
This patch wraps an do while loop until we receive a return value which
is different than 0 as it was done before commit d11ccd451b ("fs: dlm:
listen socket out of connection hash").
Cc: stable@vger.kernel.org
Fixes: d11ccd451b ("fs: dlm: listen socket out of connection hash")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch fixes a double sock_release() call when the listen() is
called for the dlm lowcomms listen socket. The caller of
dlm_listen_for_all should never care about releasing the socket if
dlm_listen_for_all() fails, it's done now only once if listen() fails.
Cc: stable@vger.kernel.org
Fixes: 2dc6b1158c ("fs: dlm: introduce generic listen")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Core
----
- Introduce and use a single page frag cache for allocating small skb
heads, clawing back the 10-20% performance regression in UDP flood
test from previous fixes.
- Run packets which already went thru HW coalescing thru SW GRO.
This significantly improves TCP segment coalescing and simplifies
deployments as different workloads benefit from HW or SW GRO.
- Shrink the size of the base zero-copy send structure.
- Move TCP init under a new slow / sleepable version of DO_ONCE().
BPF
---
- Add BPF-specific, any-context-safe memory allocator.
- Add helpers/kfuncs for PKCS#7 signature verification from BPF
programs.
- Define a new map type and related helpers for user space -> kernel
communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF).
- Allow targeting BPF iterators to loop through resources of one
task/thread.
- Add ability to call selected destructive functions.
Expose crash_kexec() to allow BPF to trigger a kernel dump.
Use CAP_SYS_BOOT check on the loading process to judge permissions.
- Enable BPF to collect custom hierarchical cgroup stats efficiently
by integrating with the rstat framework.
- Support struct arguments for trampoline based programs.
Only structs with size <= 16B and x86 are supported.
- Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping
sockets (instead of just TCP and UDP sockets).
- Add a helper for accessing CLOCK_TAI for time sensitive network
related programs.
- Support accessing network tunnel metadata's flags.
- Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open.
- Add support for writing to Netfilter's nf_conn:mark.
Protocols
---------
- WiFi: more Extremely High Throughput (EHT) and Multi-Link
Operation (MLO) work (802.11be, WiFi 7).
- vsock: improve support for SO_RCVLOWAT.
- SMC: support SO_REUSEPORT.
- Netlink: define and document how to use netlink in a "modern" way.
Support reporting missing attributes via extended ACK.
- IPSec: support collect metadata mode for xfrm interfaces.
- TCPv6: send consistent autoflowlabel in SYN_RECV state
and RST packets.
- TCP: introduce optional per-netns connection hash table to allow
better isolation between namespaces (opt-in, at the cost of memory
and cache pressure).
- MPTCP: support TCP_FASTOPEN_CONNECT.
- Add NEXT-C-SID support in Segment Routing (SRv6) End behavior.
- Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets.
- Open vSwitch:
- Allow specifying ifindex of new interfaces.
- Allow conntrack and metering in non-initial user namespace.
- TLS: support the Korean ARIA-GCM crypto algorithm.
- Remove DECnet support.
Driver API
----------
- Allow selecting the conduit interface used by each port
in DSA switches, at runtime.
- Ethernet Power Sourcing Equipment and Power Device support.
- Add tc-taprio support for queueMaxSDU parameter, i.e. setting
per traffic class max frame size for time-based packet schedules.
- Support PHY rate matching - adapting between differing host-side
and link-side speeds.
- Introduce QUSGMII PHY mode and 1000BASE-KX interface mode.
- Validate OF (device tree) nodes for DSA shared ports; make
phylink-related properties mandatory on DSA and CPU ports.
Enforcing more uniformity should allow transitioning to phylink.
- Require that flash component name used during update matches one
of the components for which version is reported by info_get().
- Remove "weight" argument from driver-facing NAPI API as much
as possible. It's one of those magic knobs which seemed like
a good idea at the time but is too indirect to use in practice.
- Support offload of TLS connections with 256 bit keys.
New hardware / drivers
----------------------
- Ethernet:
- Microchip KSZ9896 6-port Gigabit Ethernet Switch
- Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs
- Analog Devices ADIN1110 and ADIN2111 industrial single pair
Ethernet (10BASE-T1L) MAC+PHY.
- Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP).
- Ethernet SFPs / modules:
- RollBall / Hilink / Turris 10G copper SFPs
- HALNy GPON module
- WiFi:
- CYW43439 SDIO chipset (brcmfmac)
- CYW89459 PCIe chipset (brcmfmac)
- BCM4378 on Apple platforms (brcmfmac)
Drivers
-------
- CAN:
- gs_usb: HW timestamp support
- Ethernet PHYs:
- lan8814: cable diagnostics
- Ethernet NICs:
- Intel (100G):
- implement control of FCS/CRC stripping
- port splitting via devlink
- L2TPv3 filtering offload
- nVidia/Mellanox:
- tunnel offload for sub-functions
- MACSec offload, w/ Extended packet number and replay
window offload
- significantly restructure, and optimize the AF_XDP support,
align the behavior with other vendors
- Huawei:
- configuring DSCP map for traffic class selection
- querying standard FEC statistics
- querying SerDes lane number via ethtool
- Marvell/Cavium:
- egress priority flow control
- MACSec offload
- AMD/SolarFlare:
- PTP over IPv6 and raw Ethernet
- small / embedded:
- ax88772: convert to phylink (to support SFP cages)
- altera: tse: convert to phylink
- ftgmac100: support fixed link
- enetc: standard Ethtool counters
- macb: ZynqMP SGMII dynamic configuration support
- tsnep: support multi-queue and use page pool
- lan743x: Rx IP & TCP checksum offload
- igc: add xdp frags support to ndo_xdp_xmit
- Ethernet high-speed switches:
- Marvell (prestera):
- support SPAN port features (traffic mirroring)
- nexthop object offloading
- Microchip (sparx5):
- multicast forwarding offload
- QoS queuing offload (tc-mqprio, tc-tbf, tc-ets)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- support RGMII cmode
- NXP (felix):
- standardized ethtool counters
- Microchip (lan966x):
- QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets)
- traffic policing and mirroring
- link aggregation / bonding offload
- QUSGMII PHY mode support
- Qualcomm 802.11ax WiFi (ath11k):
- cold boot calibration support on WCN6750
- support to connect to a non-transmit MBSSID AP profile
- enable remain-on-channel support on WCN6750
- Wake-on-WLAN support for WCN6750
- support to provide transmit power from firmware via nl80211
- support to get power save duration for each client
- spectral scan support for 160 MHz
- MediaTek WiFi (mt76):
- WiFi-to-Ethernet bridging offload for MT7986 chips
- RealTek WiFi (rtw89):
- P2P support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Gsio
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Introduce and use a single page frag cache for allocating small skb
heads, clawing back the 10-20% performance regression in UDP flood
test from previous fixes.
- Run packets which already went thru HW coalescing thru SW GRO. This
significantly improves TCP segment coalescing and simplifies
deployments as different workloads benefit from HW or SW GRO.
- Shrink the size of the base zero-copy send structure.
- Move TCP init under a new slow / sleepable version of DO_ONCE().
BPF:
- Add BPF-specific, any-context-safe memory allocator.
- Add helpers/kfuncs for PKCS#7 signature verification from BPF
programs.
- Define a new map type and related helpers for user space -> kernel
communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF).
- Allow targeting BPF iterators to loop through resources of one
task/thread.
- Add ability to call selected destructive functions. Expose
crash_kexec() to allow BPF to trigger a kernel dump. Use
CAP_SYS_BOOT check on the loading process to judge permissions.
- Enable BPF to collect custom hierarchical cgroup stats efficiently
by integrating with the rstat framework.
- Support struct arguments for trampoline based programs. Only
structs with size <= 16B and x86 are supported.
- Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping
sockets (instead of just TCP and UDP sockets).
- Add a helper for accessing CLOCK_TAI for time sensitive network
related programs.
- Support accessing network tunnel metadata's flags.
- Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open.
- Add support for writing to Netfilter's nf_conn:mark.
Protocols:
- WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation
(MLO) work (802.11be, WiFi 7).
- vsock: improve support for SO_RCVLOWAT.
- SMC: support SO_REUSEPORT.
- Netlink: define and document how to use netlink in a "modern" way.
Support reporting missing attributes via extended ACK.
- IPSec: support collect metadata mode for xfrm interfaces.
- TCPv6: send consistent autoflowlabel in SYN_RECV state and RST
packets.
- TCP: introduce optional per-netns connection hash table to allow
better isolation between namespaces (opt-in, at the cost of memory
and cache pressure).
- MPTCP: support TCP_FASTOPEN_CONNECT.
- Add NEXT-C-SID support in Segment Routing (SRv6) End behavior.
- Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets.
- Open vSwitch:
- Allow specifying ifindex of new interfaces.
- Allow conntrack and metering in non-initial user namespace.
- TLS: support the Korean ARIA-GCM crypto algorithm.
- Remove DECnet support.
Driver API:
- Allow selecting the conduit interface used by each port in DSA
switches, at runtime.
- Ethernet Power Sourcing Equipment and Power Device support.
- Add tc-taprio support for queueMaxSDU parameter, i.e. setting per
traffic class max frame size for time-based packet schedules.
- Support PHY rate matching - adapting between differing host-side
and link-side speeds.
- Introduce QUSGMII PHY mode and 1000BASE-KX interface mode.
- Validate OF (device tree) nodes for DSA shared ports; make
phylink-related properties mandatory on DSA and CPU ports.
Enforcing more uniformity should allow transitioning to phylink.
- Require that flash component name used during update matches one of
the components for which version is reported by info_get().
- Remove "weight" argument from driver-facing NAPI API as much as
possible. It's one of those magic knobs which seemed like a good
idea at the time but is too indirect to use in practice.
- Support offload of TLS connections with 256 bit keys.
New hardware / drivers:
- Ethernet:
- Microchip KSZ9896 6-port Gigabit Ethernet Switch
- Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs
- Analog Devices ADIN1110 and ADIN2111 industrial single pair
Ethernet (10BASE-T1L) MAC+PHY.
- Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP).
- Ethernet SFPs / modules:
- RollBall / Hilink / Turris 10G copper SFPs
- HALNy GPON module
- WiFi:
- CYW43439 SDIO chipset (brcmfmac)
- CYW89459 PCIe chipset (brcmfmac)
- BCM4378 on Apple platforms (brcmfmac)
Drivers:
- CAN:
- gs_usb: HW timestamp support
- Ethernet PHYs:
- lan8814: cable diagnostics
- Ethernet NICs:
- Intel (100G):
- implement control of FCS/CRC stripping
- port splitting via devlink
- L2TPv3 filtering offload
- nVidia/Mellanox:
- tunnel offload for sub-functions
- MACSec offload, w/ Extended packet number and replay window
offload
- significantly restructure, and optimize the AF_XDP support,
align the behavior with other vendors
- Huawei:
- configuring DSCP map for traffic class selection
- querying standard FEC statistics
- querying SerDes lane number via ethtool
- Marvell/Cavium:
- egress priority flow control
- MACSec offload
- AMD/SolarFlare:
- PTP over IPv6 and raw Ethernet
- small / embedded:
- ax88772: convert to phylink (to support SFP cages)
- altera: tse: convert to phylink
- ftgmac100: support fixed link
- enetc: standard Ethtool counters
- macb: ZynqMP SGMII dynamic configuration support
- tsnep: support multi-queue and use page pool
- lan743x: Rx IP & TCP checksum offload
- igc: add xdp frags support to ndo_xdp_xmit
- Ethernet high-speed switches:
- Marvell (prestera):
- support SPAN port features (traffic mirroring)
- nexthop object offloading
- Microchip (sparx5):
- multicast forwarding offload
- QoS queuing offload (tc-mqprio, tc-tbf, tc-ets)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- support RGMII cmode
- NXP (felix):
- standardized ethtool counters
- Microchip (lan966x):
- QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets)
- traffic policing and mirroring
- link aggregation / bonding offload
- QUSGMII PHY mode support
- Qualcomm 802.11ax WiFi (ath11k):
- cold boot calibration support on WCN6750
- support to connect to a non-transmit MBSSID AP profile
- enable remain-on-channel support on WCN6750
- Wake-on-WLAN support for WCN6750
- support to provide transmit power from firmware via nl80211
- support to get power save duration for each client
- spectral scan support for 160 MHz
- MediaTek WiFi (mt76):
- WiFi-to-Ethernet bridging offload for MT7986 chips
- RealTek WiFi (rtw89):
- P2P support"
* tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits)
eth: pse: add missing static inlines
once: rename _SLOW to _SLEEPABLE
net: pse-pd: add regulator based PSE driver
dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller
ethtool: add interface to interact with Ethernet Power Equipment
net: mdiobus: search for PSE nodes by parsing PHY nodes.
net: mdiobus: fwnode_mdiobus_register_phy() rework error handling
net: add framework to support Ethernet PSE and PDs devices
dt-bindings: net: phy: add PoDL PSE property
net: marvell: prestera: Propagate nh state from hw to kernel
net: marvell: prestera: Add neighbour cache accounting
net: marvell: prestera: add stub handler neighbour events
net: marvell: prestera: Add heplers to interact with fib_notifier_info
net: marvell: prestera: Add length macros for prestera_ip_addr
net: marvell: prestera: add delayed wq and flush wq on deinit
net: marvell: prestera: Add strict cleanup of fib arbiter
net: marvell: prestera: Add cleanup of allocated fib_nodes
net: marvell: prestera: Add router nexthops ABI
eth: octeon: fix build after netif_napi_add() changes
net/mlx5: E-Switch, Return EBUSY if can't get mode lock
...
This patch fixes a possible use after free if tracing for the specific
event is enabled. To avoid the use after free we introduce a out_put
label like all other user lock specific requests and safe in a boolean
to do a put or not which depends on the execution path of
dlm_user_request().
Cc: stable@vger.kernel.org
Fixes: 7a3de7324c ("fs: dlm: trace user space callbacks")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
We had historically not checked that genlmsghdr.reserved
is 0 on input which prevents us from using those precious
bytes in the future.
One use case would be to extend the cmd field, which is
currently just 8 bits wide and 256 is not a lot of commands
for some core families.
To make sure that new families do the right thing by default
put the onus of opting out of validation on existing families.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Paul Moore <paul@paul-moore.com> (NetLabel)
Signed-off-by: David S. Miller <davem@davemloft.net>
The resource name parameter should never be changed by DLM so we declare
it as const. At some point it is handled as a char pointer, a resource
name can be a non printable ascii string as well. This patch change it
to handle it as void pointer as it is offered by DLM API.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch only set/clear the LSFL_CB_DELAY bit when it's actually a
kernel lockspace signaled by if ls->ls_callback_wq is set or not set in
this case. User lockspaces will never evaluate this flag.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The DLM_LSFL_FS flag is set in lockspaces created directly
for a kernel user, as opposed to those lockspaces created
for user space applications. The user space libdlm allowed
this flag to be set for lockspaces created from user space,
but then used by a kernel user. No kernel user has ever
used this method, so remove the ability to do it.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds trace callbacks for user locks. Unfortenately user locks
are handled in a different way than kernel locks in some cases. User
locks never call the dlm_lock()/dlm_unlock() kernel API and use the next
step internal API of dlm. Adding those traces from user API callers
should make it possible for dlm trace system to see lock handling for
user locks as well.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch changes the ls_clear_proc_locks to a spinlock because there
is no need to handle it as a mutex as there is no sleepable context when
ls_clear_proc_locks is held. This allows us to call those functionality
in non-sleepable contexts.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch removes dlm_del_ast() prototype which is not being used in
the dlm subsystem because there is not implementation for it.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Currently we handle in dlm_receive_buffer() everything else than a
DLM_MSG type as DLM_RCOM message. Although a different message than
DLM_MSG should be a DLM_RCOM we should explicit check on DLM_RCOM and
drop a log_error() if we see something unexpected.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
A dlm user may not use the DLM_LKF_VALBLK flag in the DLM API,
so a zero lvblen should be allowed as a lockspace parameter.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
I experience issues when putting a lkbsb on the stack and have sb_lvbptr
field to a dangled pointer while not using DLM_LKF_VALBLK. It will crash
with the following kernel message, the dangled pointer is here
0xdeadbeef as example:
[ 102.749317] BUG: unable to handle page fault for address: 00000000deadbeef
[ 102.749320] #PF: supervisor read access in kernel mode
[ 102.749323] #PF: error_code(0x0000) - not-present page
[ 102.749325] PGD 0 P4D 0
[ 102.749332] Oops: 0000 [#1] PREEMPT SMP PTI
[ 102.749336] CPU: 0 PID: 1567 Comm: lock_torture_wr Tainted: G W 5.19.0-rc3+ #1565
[ 102.749343] Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.16.0-2.module+el8.7.0+15506+033991b0 04/01/2014
[ 102.749344] RIP: 0010:memcpy_erms+0x6/0x10
[ 102.749353] Code: cc cc cc cc eb 1e 0f 1f 00 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 <f3> a4 c3 0f 1f 80 00 00 00 00 48 89 f8 48 83 fa 20 72 7e 40 38 fe
[ 102.749355] RSP: 0018:ffff97a58145fd08 EFLAGS: 00010202
[ 102.749358] RAX: ffff901778b77070 RBX: 0000000000000000 RCX: 0000000000000040
[ 102.749360] RDX: 0000000000000040 RSI: 00000000deadbeef RDI: ffff901778b77070
[ 102.749362] RBP: ffff97a58145fd10 R08: ffff901760b67a70 R09: 0000000000000001
[ 102.749364] R10: ffff9017008e2cb8 R11: 0000000000000001 R12: ffff901760b67a70
[ 102.749366] R13: ffff901760b78f00 R14: 0000000000000003 R15: 0000000000000001
[ 102.749368] FS: 0000000000000000(0000) GS:ffff901876e00000(0000) knlGS:0000000000000000
[ 102.749372] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 102.749374] CR2: 00000000deadbeef CR3: 000000017c49a004 CR4: 0000000000770ef0
[ 102.749376] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 102.749378] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 102.749379] PKRU: 55555554
[ 102.749381] Call Trace:
[ 102.749382] <TASK>
[ 102.749383] ? send_args+0xb2/0xd0
[ 102.749389] send_common+0xb7/0xd0
[ 102.749395] _unlock_lock+0x2c/0x90
[ 102.749400] unlock_lock.isra.56+0x62/0xa0
[ 102.749405] dlm_unlock+0x21e/0x330
[ 102.749411] ? lock_torture_stats+0x80/0x80 [dlm_locktorture]
[ 102.749416] torture_unlock+0x5a/0x90 [dlm_locktorture]
[ 102.749419] ? preempt_count_sub+0xba/0x100
[ 102.749427] lock_torture_writer+0xbd/0x150 [dlm_locktorture]
[ 102.786186] kthread+0x10a/0x130
[ 102.786581] ? kthread_complete_and_exit+0x20/0x20
[ 102.787156] ret_from_fork+0x22/0x30
[ 102.787588] </TASK>
[ 102.787855] Modules linked in: dlm_locktorture torture rpcsec_gss_krb5 intel_rapl_msr intel_rapl_common kvm_intel iTCO_wdt iTCO_vendor_support kvm vmw_vsock_virtio_transport qxl irqbypass vmw_vsock_virtio_transport_common drm_ttm_helper crc32_pclmul joydev crc32c_intel ttm vsock virtio_scsi virtio_balloon snd_pcm drm_kms_helper virtio_console snd_timer snd drm soundcore syscopyarea i2c_i801 sysfillrect sysimgblt i2c_smbus pcspkr fb_sys_fops lpc_ich serio_raw
[ 102.792536] CR2: 00000000deadbeef
[ 102.792930] ---[ end trace 0000000000000000 ]---
This patch fixes the issue by checking also on DLM_LKF_VALBLK on exflags
is set when copying the lvbptr array instead of if it's just null which
fixes for me the issue.
I think this patch can fix other dlm users as well, depending how they
handle the init, freeing memory handling of sb_lvbptr and don't set
DLM_LKF_VALBLK for some dlm_lock() calls. It might a there could be a
hidden issue all the time. However with checking on DLM_LKF_VALBLK the
user always need to provide a sb_lvbptr non-null value. There might be
more intelligent handling between per ls lvblen, DLM_LKF_VALBLK and
non-null to report the user the way how DLM API is used is wrong but can
be added for later, this will only fix the current behaviour.
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
If the user generates -EINVAL it's probably because they are
using DLM incorrectly. Change the log level to make these
errors more visible.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Avoid hard-coded function names inside message format strings.
(Prevents checkpatch warnings.)
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch checks for -EBUSY conditions in dlm_unlock() before
checking for -EINVAL conditions (except for CANCEL and
FORCEUNLOCK calls where a busy condition is expected.)
There are no problems with the current ordering of checks,
but this makes dlm_unlock() consistent with dlm_lock(), and
may avoid future problems if other checks are added.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
During lock arg validation, first check for -EBUSY cases, then for
-EINVAL cases. The -EINVAL checks look at lkb state variables
which are not stable when an lkb is busy and would cause an
-EBUSY result, e.g. lkb->lkb_grmode.
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch fixes a race by using ls_cb_mutex around the bit
operations and conditional code blocks for LSFL_CB_DELAY.
The function dlm_callback_stop() expects to stop all callbacks and
flush all currently queued onces. The set_bit() is not enough because
there can still be queue_work() after the workqueue was flushed.
To avoid queue_work() after set_bit(), surround both by ls_cb_mutex.
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The unhold_lkb() function decrements the lock's kref, and
asserts that the ref count was not the final one. Use the
kref_put release function (which should not be called) to
call the assert, rather than doing the assert based on the
kref_put return value. Using kill_lkb() as the release
function doesn't make sense if we only want to assert.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will disable use of deprecated timeout features if
CONFIG_DLM_DEPRECATED_API is not set. The deprecated features
will be removed in upcoming kernel release v6.2.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds a CONFIG_DLM_DEPRECATED_API Kconfig option
that must be enabled to use two timeout-related features
that we intend to remove in kernel v6.2. Warnings are
printed if either is enabled and used. Neither has ever
been used as far as we know.
. The DLM_LSFL_TIMEWARN lockspace creation flag will be
removed, along with the associated configfs entry for
setting the timeout. Setting the flag and configfs file
would cause dlm to track how long locks were waiting
for reply messages. After a timeout, a kernel message
would be logged, and a netlink message would be sent
to userspace. Recently, midcomms messages have been
added that produce much better logging about actual
problems with messages. No use has ever been found
for the netlink messages.
. The userspace libdlm API has allowed the DLM_LKF_TIMEOUT
flag with a timeout value to be set in lock requests.
The lock request would be cancelled after the timeout.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Remove the unused timeout parameter from dlm_user_adopt_orphan().
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch removes warning messages that could be logged when
remote requests had been waiting on a reply message for some timeout
period (which could be set through configfs, but was rarely enabled.)
The improved midcomms layer now carefully tracks all messages and
replies, and logs much more useful messages if there is an actual
problem.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch fixes some grammar output in lowcomms implementation by
removing the "successful" word which should be "successfully" but it
can never be unsuccessfully so we remove it.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds comments about the difference between the lower 2 bytes
of lkb flags and the 2 upper bytes of the lkb IFL flags. In short the
upper 2 bytes will be handled as internal flags whereas the lower 2
bytes are part of the DLM protocol and are used to exchange messages.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch cleans up the handling of recovery results by moving it from
ls_recover() to the caller do_ls_recovery(). This makes the error handling
clearer.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Make dlm_new_lockspace() wait until a full recovery completes
sucessfully or fails. Previously, dlm_new_lockspace() returned
to the caller after dlm_recover_members() finished, which is
only partially through recovery. The result of the previous
behavior is that the new lockspace would not be usable for some
time (especially with overlapping recoveries), and some errors
in the later part of recovery could not be returned to the caller.
Kernel callers gfs2 and cluster-md have their own wait handling to
wait for recovery to complete after calling dlm_new_lockspace().
This continues to work, but will be unnecessary.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
A lockspace can be "stopped" multiple times consecutively before
being "started" (when recoveries overlap.) In this case, the
lsop_recover_prep callback only needs to be called once when the
lockspace is first stopped, and not repeatedly for each stop.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Make clear that a particular recovery iteration must not be aborted
before membership changes are applied to the members list (ls_nodes)
and midcomms layer. Interrupting recovery before this can result
in missing node-specific changes in midcomms or through lsops.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds the resource name to dlm tracepoints. The name
usually comes through the lkb_resource, but in some cases a resource
may not yet be associated with an lkb, in which case the name and
namelen parameters are used.
It should be okay to access the lkb_resource and the res_name field at
the time when the tracepoint is invoked. The resource is assigned to a
lkb and it's reference is being held during the tracepoint call. During
this time the resource cannot be freed. Also a lkb will never switch
its assigned resource. The name of a dlm_rsb is assigned at creation
time and should never be changed during runtime as well.
The TP_printk() call uses always a hexadecimal string array
representation for the resource name (which is not necessarily ascii.)
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Alexander Aring