The BD9571 PMIC is present on the Renesas Salvator-X(S) and R-Car
Starter Kit Premier/Pro development boards.
Signed-off-by: Dien Pham <dien.pham.ry@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Here are the main updates for SoC support (besides DT additions) for ARM
32- and 64-bit platforms. The branch also contains defconfig updates to
turn on drivers and options as needed on the various platforms.
The largest parts of the delta are from cleanups moving platform data
and board file setup of TI platforms to ti-sysc bus drivers. There are
also some sweeping changes of eeprom and nand setup on Davinci, i.MX
and other platforms.
Samsung is removing support for Exynos5440, which was an oddball SoC
that hasn't been seen much use in designs.
Renesas is adding support for new SoCs (R-Car E3, RZ/G1C and RZ/N1D).
Linus Walleij is also removing support for ux500 (Sony Ericsson)
U8540/9540 SoCs that never made it to significant mass production and
products.
-----BEGIN PGP SIGNATURE-----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=S5wc
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates from Olof Johansson:
"Here are the main updates for SoC support (besides DT additions) for
ARM 32- and 64-bit platforms. The branch also contains defconfig
updates to turn on drivers and options as needed on the various
platforms.
The largest parts of the delta are from cleanups moving platform data
and board file setup of TI platforms to ti-sysc bus drivers. There are
also some sweeping changes of eeprom and nand setup on Davinci, i.MX
and other platforms.
Samsung is removing support for Exynos5440, which was an oddball SoC
that hasn't been seen much use in designs.
Renesas is adding support for new SoCs (R-Car E3, RZ/G1C and RZ/N1D).
Linus Walleij is also removing support for ux500 (Sony Ericsson)
U8540/9540 SoCs that never made it to significant mass production and
products"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits)
MAINTAINERS: add NXP linux team maillist as i.MX reviewer
ARM: stm32: Don't select DMA unconditionally on STM32MP157C
arm64: defconfig: Enable PCIe on msm8996 and db820c
ARM: pxa3xx: enable external wakeup pins
ARM: pxa: stargate2: use device properties for at24 eeprom
arm64: defconfig: Enable HISILICON_LPC
arm64: defconfig: enable drivers for Poplar support
arm64: defconfig: Enable UFS on msm8996
ARM: berlin: switch to SPDX license identifier
arm: berlin: remove non-necessary flush_cache_all()
ARM: berlin: extend BG2CD Kconfig entry
OMAP: CLK: CLKSRC: Add suspend resume hooks
ARM: AM43XX: Add functions to save/restore am43xx control registers
ASoC: ams_delta: use GPIO lookup table
ARM: OMAP1: ams-delta: add GPIO lookup tables
bus: ti-sysc: Fix optional clocks array access
ARM: OMAP2+: Make sure LOGICRETSTATE bits are not cleared
ARM: OMAP2+: prm44xx: Inroduce cpu_pm notifiers for context save/restore
ARM: OMAP2+: prm44xx: Introduce context save/restore for am43 PRCM IO
ARM: OMAP2+: powerdomain: Introduce cpu_pm notifiers for context save/restore
...
* Enable UFS and PCIe for Qualcomm msm8996/db820c
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=sPLc
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/defconfig
Qualcomm ARM64 Based defconfig Updates for v4.18
* Enable UFS and PCIe for Qualcomm msm8996/db820c
* tag 'qcom-arm64-defconfig-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
arm64: defconfig: Enable PCIe on msm8996 and db820c
arm64: defconfig: Enable UFS on msm8996
Signed-off-by: Olof Johansson <olof@lixom.net>
- Enable the support of ethernet, eMMC, Combo/INNO phy
and PCIe for Hi3798CV200
- Enable the LPC for hip06 and hip07
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=l2fi
-----END PGP SIGNATURE-----
Merge tag 'hisi-defconfig-for-4.18v3' of git://github.com/hisilicon/linux-hisi into next/defconfig
ARM64: hisilicon: defconfig updates for 4.18
- Enable the support of ethernet, eMMC, Combo/INNO phy
and PCIe for Hi3798CV200
- Enable the LPC for hip06 and hip07
* tag 'hisi-defconfig-for-4.18v3' of git://github.com/hisilicon/linux-hisi:
arm64: defconfig: Enable HISILICON_LPC
arm64: defconfig: enable drivers for Poplar support
Signed-off-by: Olof Johansson <olof@lixom.net>
The msm8996 PCIe sits behind the "agnoc0", which is represented as a
simple-pm-bus, so enable support for this. Then enable the QMP phy
driver.
Also enable the atl1c ethernet driver and ath10k wlan driver to support
these components on the DragonBoard820c.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Now that the driver has been merged for the HiSilicon
LPC host, enable the relevant config.
Turning on this config will also enable config
INDIRECT_PIO, which would have not been enabled
previously - see config info for more details.
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
It enables driver support of Ethernet, eMMC, Combo/INNO phy and PCIe
for Hi3798CV200 Poplar platform.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Adding thermal for Armada 7K/8K and SPI for Armada 3700
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWv7/MgAKCRALBhiOFHI7
1SyaAKCbxPDR48yWie2ZLxneKc/xZu/QwQCffSpKG1EARKRgk/rz5frnF1vwUuw=
=olHS
-----END PGP SIGNATURE-----
Merge tag 'mvebu-arm64-4.18-1' of git://git.infradead.org/linux-mvebu into next/defconfig
mvebu arm64 for 4.18 (part 1)
Adding thermal for Armada 7K/8K and SPI for Armada 3700
* tag 'mvebu-arm64-4.18-1' of git://git.infradead.org/linux-mvebu:
arm64: defconfig: enable the Armada thermal driver
arm64: defconfig: enable CONFIG_SPI_ARMADA_3700
Signed-off-by: Olof Johansson <olof@lixom.net>
* Enable in ARM64 defconfig:
- Recently mainlined support for R-Car E3 (r8a77990) SoC
- HDMI sound and depdencies.
HDMI sound is used by R-Car Gen 3. These options are enabled as
modules to avoid unnecesesarily enlarging the kernel image.
-----BEGIN PGP SIGNATURE-----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=pmB3
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-defconfig-for-v4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig
Renesas ARM64 Based SoC Defconfig Updates for v4.18
* Enable in ARM64 defconfig:
- Recently mainlined support for R-Car E3 (r8a77990) SoC
- HDMI sound and depdencies.
HDMI sound is used by R-Car Gen 3. These options are enabled as
modules to avoid unnecesesarily enlarging the kernel image.
* tag 'renesas-arm64-defconfig-for-v4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: defconfig: enable R8A77990 SoC
arm64: defconfig: Enable CONFIG_SND_AUDIO_GRAPH_CARD
arm64: defconfig: makes SND_SIMPLE_CARD to module
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable GLINK RPM so that we get RPM regulators and clocks and enable the
UFS host controller driver and the Qualcomm UFS platform driver. The UFS
phy is selected by the Qualcomm UFS driver.
The simple ondemand devfreq governor must be builtin, as there's no
mechanism for automatically loading it, causing UFS HCD initialization
to fail.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch enables the Armada thermal driver to support thermal
management on Marvell EBU Armada SoCs (7K,8K).
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Enable the Renesas R-Car E3 (R8A77990) SoC in the ARM64 defconfig.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
as well as general cros-ec, hid, touchscreen bluetooth and wifi-drivers
on 64bit arm platforms.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlr5d3UQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgV6yB/9Xckx6aeyzem9wP6qFBX5v3hGit9inN+F9
mCf/0HlWpMs1TvB5HIraXf63Z8xRlqD+X+SQjKOjzyXPbFtPW7Ib++rpZAjod/GZ
THyEPnniW0KnxOqPRG0AkZZLpxUxpC2895VI1E+o8DMA6Pxt5cVqaxEktXdMFoqW
3zsJSGMKa8Cyih+K/ZZGyQTmnxEd8o4nkZS7tjx3YSINVKKoFPKg2kLABTqHr5Ru
kZZ/hhfSkrn+j4l3aZ+gVDeHDpjy5sJZ4w5O+xxuTcnDPhGgRcTwI3Qr6x24Bzqi
HPFjZuf7Utxl4LYXqKebdpQLYC9v4k7GMZKfFm00ur8pE6Iwt7ja
=+n7b
-----END PGP SIGNATURE-----
Merge tag 'v4.18-rockchip-defconfig64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/defconfig
Enablement of Rockchip-specific efuse, io-domain and typec drivers
as well as general cros-ec, hid, touchscreen bluetooth and wifi-drivers
on 64bit arm platforms.
* tag 'v4.18-rockchip-defconfig64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: defconfig: enable rockchip efuse
arm64: defconfig: Enable bluetooth USB support
arm64: defconfig: Enable Marvell WiFi-Ex PCIe driver
arm64: defconfig: Enable Atmel Maxtouch driver
arm64: defconfig: Enable HID over I2C drivers
arm64: defconfig: Enable ChromeOS EC drivers for supported Chromebooks.
arm64: defconfig: Enable Rockchip io-domain driver
arm64: defconfig: Enable typec-phy and extcon-usbc-cros-ec for rk3399
Signed-off-by: Olof Johansson <olof@lixom.net>
The VC4 needs more memory than the default setting (16 MB):
vc4-drm soc:gpu: swiotlb: coherent allocation failed, size=16777216
[drm:vc4_bo_create [vc4]] *ERROR* Failed to allocate from CMA:
vc4_v3d 3fc00000.v3d: Failed to allocate memory for tile binning: -12.
You may need to enable CMA or give it more memory.
vc4-drm soc:gpu: failed to bind 3fc00000.v3d (ops vc4_v3d_ops [vc4]): -12
vc4-drm soc:gpu: master bind failed: -12
vc4-drm: probe of soc:gpu failed with error -12
So increase the value to 32 MB and fix this issue.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Now Rockchip PCIe drivers could support both of RC mode and EP
mode, so we need to rename the config name. This patch updates
defconfig to reflect the fact that we want to build Rockchip PCIe
controller as RC mode, into a module as before.
Cc: linux-arm-kernel@lists.infradead.org
Cc: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
The efuses on Rockchip socs often contain informations
about specifics of the chip its running on (leakage currents etc)
which components might want to read to adjust settings accordingly.
So enable the efuse early for that.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
CONFIG_SND_AUDIO_GRAPH_CARD is needed to use HDMI sound with video
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Recently kernelCI reported the board mt7622-rfb1 has a fail test with
kernel: ERROR: did not start booting whose details could be seen at [1].
The cause is that UART0 can't output anything when it's missing a proper
pin setup with current DTS, so the essential driver is always getting
enabled to fix up the issue.
[1] https://kernelci.org/boot/id/5ad7d62759b51461bfb1f829/
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: stable@vger.kernel.org
Fixes: ae457b7679 ("arm64: dts: mt7622: add SoC and peripheral related device nodes")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Enable the Bluetooth USB controller which is present
in the RK3399 Kevin Chromebook.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Enable the wireless network driver to support the WiFi adapter
present in RK3399 Kevin Chromebooks. Note that this also
enables Bluetooth via USB.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Enable the Atmel Maxtouch driver to support the touchscreen
and touchpad present in RK3399 Kevin Chromebooks.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Enable the HID-I2C driver to support the stylus
present in RK3399 Kevin Chromebooks.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Heiko Stübner justified pretty well the change in commit e330eb86ba
("ARM: multi_v7_defconfig: enable Rockchip io-domain driver"). This
change is also needed for arm64 rockchip boards, so, do the same for arm64.
The io-domain driver is necessary to notify the soc about voltages
changes happening on supplying regulators. Probably the most important
user right now is the mmc tuning code, where the soc needs to get
notified when the voltage is dropped to the 1.8V point.
As this option is necessary to successfully tune UHS cards etc, it
should get built in. Otherwise, tuning will fail with,
dwmmc_rockchip fe320000.dwmmc: All phases bad!
mmc0: tuning execution failed: -5
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Enables typec phyter and extcon driver for cable detection that is used by
USB 3.0 controller for Rockchip rk3399 SoCs.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Alexandre Courbot <acourbot@chromium.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Raspberry Pi 3 B+ has a Microchip LAN7515 (connect via USB) and
a Cypress CYW43455 (connect via UART). This patch enables the necessary
drivers.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
Enable the following to allow them to be more widely exercised:
* Newly added R8A77965 and R8A77980 SoCs
* PWM and USB as used on R-Car Gen3 SoCs
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE4nzZofWswv9L/nKF189kaWo3T74FAlqrsFAACgkQ189kaWo3
T74aUA//XqcEz2mbp+CnO6tfAhRnWP9tAQ4MTOvs9TaWR0k97dFIWskVta5Q78eE
NHsHtmsck0WX+MsBq/aLJ6Vch2QsUn+e/KcaV2UyjLOeL4g4KJYLF2S0iVoiNRW+
7HmL0Lv5HyI64fGRHzO8BrrGFEYm0l54eRkg74GiQoLApyJmd/2sMsgxT7cWVpp7
pjQzTfIzI+Z0h5S83paCInZVaLztmvTnm1ZVoxjHwgtHOHgjmm+6Tn5YDyv5AxG1
xkfYH5rREOPpdj7ZcLktzQ7XPfXqGiwT3qPmx8MuXSRrG4AcTaNSYtqfr2S6yLm5
PlY0352xLSt+sBZw3va0sobcZOGxkPAmwwycw6yU0FST/hSgpbVIKmCetFD2aYIg
jltBUzRN5ST1A0/i9IAG1lruwYyzzVH/h40AQcH4CT5HvLI8k1e0Omp0N2eJie4c
1esYFW453l1+VyHPGan7Nmj/dgh8pDvu1GQyqdEPnMoP1YnkiMkhc9JuMDTrARWS
KdRLc9ysPUpHsyEh1RH/0nlc0262tw7l+HEQiPCT8iaY+x6iYLoxwXkRz8KYiwN9
MrZo3eqOjJdL5FXO8C/Z577jOYaZv8/do9FeEQdmVdqObgnDcJdKYenFxBXpr3RX
mruqjrctjcUwQ632ZSR0gf/su7E4rS3qpH+X8T8D6RxbER232fg=
=heZq
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-defconfig-for-v4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
Pull "Renesas ARM64 Based SoC Defconfig Updates for v4.17" from Simon Horman:
Enable the following to allow them to be more widely exercised:
* Newly added R8A77965 and R8A77980 SoCs
* PWM and USB as used on R-Car Gen3 SoCs
* tag 'renesas-arm64-defconfig-for-v4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: defconfig: enable R8A77965 SoC
arm64: defconfig: Enable PWM and USB for R-Car
arm64: defconfig: enable R8A77980 SoC
Enable the BPMP thermal and CPU frequency drivers as well as make sure
that the Tegra SMMU is enabled by default because there's no fun without
it. Also enable initial Tegra194 support.
-----BEGIN PGP SIGNATURE-----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=Lnk+
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.17-arm64-defconfig' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/soc
Pull "arm64: Default configuration updates for v4.17-rc1" from Thierry Reding:
Enable the BPMP thermal and CPU frequency drivers as well as make sure
that the Tegra SMMU is enabled by default because there's no fun without
it. Also enable initial Tegra194 support.
* tag 'tegra-for-4.17-arm64-defconfig' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: defconfig: Enable the Tegra SMMU by default
arm64: defconfig: Enable CONFIG_TEGRA_BPMP_THERMAL
arm64: defconfig: Enable CONFIG_ARM_TEGRA186_CPUFREQ
arm64: defconfig: Enable NVIDIA Tegra194 support
This patch enables the CONFIG_STMMAC_ETH to the default arm64 defconfig:
-CONFIG_STMMAC_ETH=m
+CONFIG_STMMAC_ETH=y
+CONFIG_DWMAC_IPQ806X=m
+CONFIG_DWMAC_MESON=m
+CONFIG_DWMAC_ROCKCHIP=m
+CONFIG_DWMAC_SUNXI=m
+CONFIG_DWMAC_SUN8I=m
The STMMAC ethernet controller is on the Stratix10 platform, and thus needs
driver to be in the kernel image for NFS to work.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Display and graphics can't work together without an SMMU, so it is
effectively always getting enabled anyway.
Signed-off-by: Thierry Reding <treding@nvidia.com>
- Enable deadline IO scheduler to improve the performnace for some
usecaese without changing the default IO scheduler
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=BscW
-----END PGP SIGNATURE-----
Merge tag 'hisi-defconfig-for-4.17' of git://github.com/hisilicon/linux-hisi into next/soc
Pull "ARM64: hisilicon: defconfig updates for 4.17" from Wei Xu:
- Enable deadline IO scheduler to improve the performnace for some
usecaese without changing the default IO scheduler
* tag 'hisi-defconfig-for-4.17' of git://github.com/hisilicon/linux-hisi:
arm64: defconfig: enable IOSCHED_DEADLINE
Enable Tegra BPMP thermal sensor support by default, built as a module.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable Tegra186 CPU frequency scaling support by default.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable the various CPUFREQ governors and statistics to ease development.
Don't change the default governor - performance governor.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Enable the driver for the TSENS IP that is present across several QCOM
SoCs.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The APCS block is present on several Qualcomm SoCs e.g. 8916, 8996. On the
8916 it is needed to enable the clock controller that in turn enables
cpufreq on the platform while on the 8996 it is needed for communication
with RPM.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Enable NVIDIA Tegra194 support in the default 64-bit ARM configuration.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable support in arm64's defconfig for Socionext SynQuacer based
platforms, by enabling the arch Kconfig symbol, and enabling builtin
support for the ethernet, GPIO and SDHCI controllers
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
New crypto drivers have been introduced in v4.16 that implement the
SHA-512, SHA3 and SM3 secure hash algorithms using ARMv8.2 optional
instructions. Add these drivers to arm64's defconfig as modules.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
For certain workloads the deadline IO scheduler offers
particular advantages over other schedulers and has shown
to perform better, so enable it.
The default IO scheduler is unaffected by this change, and
currently is CFQ.
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Enable the Renesas R-Car M3-N (R8A77965) SoC in the ARM64 defconfig.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Enables PWM controller, USB-DMAC that is used by HS-USB, USB 3.0
peripheral controller and USB 3.0 PHY for R-Car SoCs.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Enable the Renesas R-Car V3H (R8A77980) SoC in the ARM64 defconfig.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
These are mostly minor bugfixes, cleanup and many defconfig updates to
support added drivers. In particular OMAP and PXA keep cleaning up the
legacy code base, as usual.
Nvidia adds some more SoC support code for Tegra 186.
For the first time on years, we are actually adding a non-DT platform for,
the EP93xx based Liebherr controller BK3.1. It's a minor variation of
the EP93xx reference design and in active use, while EP93xx apparently
doesn't have enough new development to have any device tree support.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=frm4
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates from Arnd Bergmann:
"These are mostly minor bugfixes, cleanup and many defconfig updates to
support added drivers. In particular OMAP and PXA keep cleaning up the
legacy code base, as usual.
Nvidia adds some more SoC support code for Tegra 186.
For the first time on years, we are actually adding a non-DT platform
for the EP93xx based Liebherr controller BK3.1. It's a minor variation
of the EP93xx reference design and in active use, while EP93xx
apparently doesn't have enough new development to have any device tree
support"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits)
ARM: omap: hwmod: fix section mismatch warnings
ARM: pxa/tosa-bt: add MODULE_LICENSE tag
arm64: defconfig: enable CONFIG_ACPI_APEI_EINJ
arm64: defconfig: enable EDAC GHES option
arm64: defconfig: enable CONFIG_ACPI_APEI_MEMORY_FAILURE
ARM: imx_v6_v7_defconfig: enable CONFIG_CPU_FREQ_STAT
Wind down ARM/TANGO port
ARM: davinci: constify gpio_led
ARM: davinci: drop unneeded newline
soc: Add SoC driver for Gemini
ARM: SAMSUNG: Add SPDX license identifiers
ARM: S5PV210: Add SPDX license identifiers
ARM: S3C64XX: Add SPDX license identifiers
ARM: S3C24XX: Add SPDX license identifiers
ARM: EXYNOS: Add SPDX license identifiers
ARM: imx: remove unused imx3 pm definitions
ARM: imx: don't abort MMDC probe if power saving status doesn't match
ARM: imx_v6_v7_defconfig: enable RTC_DRV_MXC_V2
ARM: imx_v6_v7_defconfig: Add missing config for DART-MX6 SoM
ARM: davinci: Use PTR_ERR_OR_ZERO()
...
Enable APEI EINJ for ARM64 to support the error injection.
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Acked-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable CONFIG_EDAC_GHES option for ARM64,so that the memory errors
are processed and reported to the user space.
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Acked-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable ACPI APEI MEMORY FAILURE option for ARM64,
so that memory errors will be handled.
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Acked-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Choose to compile and embed marvell_nand.c as NAND controller driver
instead of the legacy pxa3xx_nand.c for platforms with Marvell EBU
SoCs.
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Enables MUSB driver and the Allwinner glue layer driver by default.
All Allwinner SoCs (excluding the A80) have the Mentor Graphics Inventra
Multi-Point Hi-Speed OTG Controller (MHDRC). Enabling this extends test
coverage to this peripheral.
-----BEGIN PGP SIGNATURE-----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=ykqf
-----END PGP SIGNATURE-----
Merge tag 'sunxi-config64-for-4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/soc
Allwinner arm64 defconfig changes for 4.16
Enables MUSB driver and the Allwinner glue layer driver by default.
All Allwinner SoCs (excluding the A80) have the Mentor Graphics Inventra
Multi-Point Hi-Speed OTG Controller (MHDRC). Enabling this extends test
coverage to this peripheral.
* tag 'sunxi-config64-for-4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: defconfig: enable MUSB HDRC along with Allwinner glue
Signed-off-by: Olof Johansson <olof@lixom.net>
Adding the cpu frequency scaling support for Armada 37xx
-----BEGIN PGP SIGNATURE-----
iIEEABECAEEWIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWjzhHyMcZ3JlZ29yeS5j
bGVtZW50QGZyZWUtZWxlY3Ryb25zLmNvbQAKCRALBhiOFHI71WygAJ9poqfM0F76
GCywSaql9D//YLIMBwCggBJU4OCJCgNJx/KN9n0+WmaM65M=
=D4Xs
-----END PGP SIGNATURE-----
Merge tag 'mvebu-arm64-4.16-1' of git://git.infradead.org/linux-mvebu into next/soc
mvebu arm64 for 4.16 (part 1)
Adding the cpu frequency scaling support for Armada 37xx
* tag 'mvebu-arm64-4.16-1' of git://git.infradead.org/linux-mvebu:
arm64: defconfig: enable ARM_ARMADA_37XX_CPUFREQ
Signed-off-by: Olof Johansson <olof@lixom.net>
No Qualcomm SoC requires the "phy-qcom-8x16-usb.c" USB phy driver
support any more. Remove the code, and remove the config option
from the arm64 defconfig.
Suggested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
No Qualcomm SoC requires the "phy-msm-usb.c" USB phy driver support
any more. Remove the code, and remove the config option from the
arm64 defconfig.
Suggested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
No Qualcomm SoC requires the "ehci-msm.c" code any more. So remove
the code, and remove the config option from the arm64 defconfig.
Suggested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Most development boards and devices have one or more LEDs. It is useful
during debugging if they can be wired to show different behaviours such as
disk or cpu activity or a load-average dependent heartbeat. Enable panic
and disk activity triggers so they can be tied to LED activity during
debugging as well.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add the cpu frequency scaling support for Armada 37xx by default, this
should allow a better coverage in kernel continuous integration tests.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Allwinner SoCs typically have a Mentor Graphics Inventra MUSB
dual role controller for USB OTG. This is need for verifying
gadget functions, so enable them by default.
Tested 'otg' mode with mass storage function.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
For Armada 7K/8K, enable NAND, RTC, comphy and 10G PHY in the
defconfig
-----BEGIN PGP SIGNATURE-----
iIEEABECAEEWIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWeoQjSMcZ3JlZ29yeS5j
bGVtZW50QGZyZWUtZWxlY3Ryb25zLmNvbQAKCRALBhiOFHI71SAGAJwN7iJ6Xywi
3DGgmYy/KtEm0/ZxcwCfZ6dFcGrSWo4IsPictpUL+x4TETk=
=Gmg4
-----END PGP SIGNATURE-----
Merge tag 'mvebu-arm64-4.15-1' of git://git.infradead.org/linux-mvebu into next/soc
Pull "mvebu arm64 for 4.15 (part 1)" from Gregory CLEMENT:
For Armada 7K/8K, enable NAND, RTC, comphy and 10G PHY in the
defconfig
* tag 'mvebu-arm64-4.15-1' of git://git.infradead.org/linux-mvebu:
arm64: defconfig: enable RTC on Armada 7K/8K SoCs
arm64: defconfig: enable NAND on Armada 7K/8K SoCs
arm64: defconfig: enable Marvell CP110 comphy
arm64: defconfig: enable the Marvell 10G PHY as a module
This enables the PCI host controller on 64-bit ARM. It is supported and
enabled via device tree on Tegra210 and Tegra186.
-----BEGIN PGP SIGNATURE-----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=nDdS
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.15-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/soc
Pull "arm64: tegra: Default configuration updates for v4.15-rc1" from Thierry Reding:
This enables the PCI host controller on 64-bit ARM. It is supported and
enabled via device tree on Tegra210 and Tegra186.
* tag 'tegra-for-4.15-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: defconfig: Enable Tegra PCI controller
Enable QCOM IOMMU driver for 'B' family devices, such as APQ8016 found on the
Dragonboard 410c. With this change, graphics console and GPU are working
fine (using mesa/freedreno for GPU driver).
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ThunderX needs its PCI host drivers to do anything useful, and
it's probably helpful to have networking by default too.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The driver has supported the 64-bit Tegra210 for a while now, so enable
it in the defconfig.
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Stephen Boyd reworked some Qualcomm USB code earlier this year.
The result requires a few different config options to be enabled
in order for the USB on the DragonBoard 410c to continue working,
but these were never added to arm64 "defconfig". As a result, USB
on that board stopped working during the v4.13-rc1 merge window.
Re-enable this functionality by setting the needed config options
in the arm64 "defconfig" file.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The Armada 38x RTC driver supports also the RTC controller found on the
Armada 7K/8K SoCs, so enable it.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Enable QCOM IOMMU driver for 'B' family devices, such as APQ8016 found on the
Dragonboard 410c. With this change, graphics console and GPU are working
fine (using mesa/freedreno for GPU driver).
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The PXA3xx NAND driver supports also the NAND controller found on the
Armada 7K/8K SoCs, so enable it.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Enable the Renesas R-Car V3M (R8A77970) SoC in the ARM64 defconfig.
Suggested-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The comphy is an hardware block giving access to common PHYs that can be
used by various other engines (Network, SATA, ...). This is used on
Marvell 7k/8k platforms for now. Enable the corresponding driver.
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The Marvell 10G PHY is present on mvebu platforms. Enable it as a module
so that the network works on these platforms.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
We want this driver to detect critical temperatures in time.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Enable support for the Renesas R-Car D3 SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This branch contains platform updates for 32- and 64-bit ARM,
including defconfig updates to enable new options, drivers and
platforms. There are also a few fixes and cleanups for some existing vendors.
Some of the things worth highlighting here are:
- Enabling new crypt drivers on arm64 defconfig
- QCOM IPQ8074 clocks and pinctrl drivers on arm64 defconfig
- Debug support enabled for Renesas r8a7743
- Various config updates for Renesas platforms (sound, USB, other drivers)
- Platform support (including SMP) for TI dra762
- OMAP cleanups: Move to use generic 8250 debug_ll, removal of stale DMA code
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=g8cF
-----END PGP SIGNATURE-----
Merge tag 'armsoc-platforms' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM/arm64 SoC platform updates from Olof Johansson: "This branch
contains platform updates for 32- and 64-bit ARM, including defconfig
updates to enable new options, drivers and platforms. There are also a
few fixes and cleanups for some existing vendors.
Some of the things worth highlighting here are:
- Enabling new crypt drivers on arm64 defconfig
- QCOM IPQ8074 clocks and pinctrl drivers on arm64 defconfig
- Debug support enabled for Renesas r8a7743
- Various config updates for Renesas platforms (sound, USB, other
drivers)
- Platform support (including SMP) for TI dra762
- OMAP cleanups: Move to use generic 8250 debug_ll, removal of stale
DMA code"
* tag 'armsoc-platforms' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (109 commits)
ARM: multi_v7_defconfig: make eSDHC driver built-in
arm64: defconfig: enable rockchip graphics
MAINTAINERS: Update Cavium ThunderX2 entry
ARM: config: aspeed: Add I2C, VUART, LPC Snoop
ARM: configs: aspeed: Update Aspeed G4 with VMSPLIT_2G
ARM: s3c24xx: Fix NAND ECC mode for mini2440 board
ARM: davinci_all_defconfig: enable tinydrm and ST7586
arm64: defconfig: Enable QCOM IPQ8074 clock and pinctrl
ARM: defconfig: tegra: Enable ChipIdea UDC driver
ARM: configs: Add Tegra I2S interfaces to multi_v7_defconfig
ARM: tegra: Add Tegra I2S interfaces to defconfig
ARM: tegra: Update default configuration for v4.13-rc1
MAINTAINERS: update ARM/ZTE entry
soc: versatile: remove unnecessary static in realview_soc_probe()
ARM: Convert to using %pOF instead of full_name
ARM: hisi: Fix typo in comment
ARM: multi_v7_defconfig: add CONFIG_BRCMSTB_THERMAL
arm64: defconfig: add CONFIG_BRCMSTB_THERMAL
arm64: defconfig: add recently added crypto drivers as modules
arm64: defconfig: enable CONFIG_UNIPHIER_WATCHDOG
...
Enable the graphics-related options needed by Rockchip boards.
This includes the pwm-backlight which will be needed by the internal
displays used on Gru Chrome-devices.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Mark yao <mark.yao@rock-chips.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable X-Powers AXP series PMIC mfd and regulator support by default.
-----BEGIN PGP SIGNATURE-----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=Xxj3
-----END PGP SIGNATURE-----
Merge tag 'sunxi-config64-for-4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/arm64
Pull "Allwinner arm64 defconfig changes for 4.14" from Chen-Yu Tsai:
Enable X-Powers AXP series PMIC mfd and regulator support by default.
* tag 'sunxi-config64-for-4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: defconfig: Enable REGULATOR_AXP20X
arm64: defconfig: Enable MFD_AXP20X_RSB
SoCs for 4.14, please pull the following:
- Markus enables the Broadcom STB AVS thermal monitoring driver as a module
which is currently queued in Rui Zhang's tree
-----BEGIN PGP SIGNATURE-----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=xrY6
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.14/defconfig-arm64' of http://github.com/Broadcom/stblinux into next/arm64
Pull "Broadcom defconfig-arm64 changes for 4.14" from Florian Fainelli:
This pull request contains ARM64 defconfig changes for Broadcom ARM64-based
SoCs for 4.14, please pull the following:
- Markus enables the Broadcom STB AVS thermal monitoring driver as a module
which is currently queued in Rui Zhang's tree
* tag 'arm-soc/for-4.14/defconfig-arm64' of http://github.com/Broadcom/stblinux:
arm64: defconfig: add CONFIG_BRCMSTB_THERMAL
These configs are required for booting kernel in QCOM
IPQ8074 boards.
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
- Enable Kirin PCIe host, hi6421v530 mfd and regulator,
syscon reboot mode, serdev bus, OP-TEE and K3 DMA support
for hikey and hikey960
- Enable pcie based sas controller support for hip08 SoC
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=AEey
-----END PGP SIGNATURE-----
Merge tag 'hisi-defconfig-for-4.14' of git://github.com/hisilicon/linux-hisi into next/arm64
Pull "ARM64: hisilicon: defconfig updates for 4.14" from Wei Xu:
- Enable Kirin PCIe host, hi6421v530 mfd and regulator,
syscon reboot mode, serdev bus, OP-TEE and K3 DMA support
for hikey and hikey960
- Enable pcie based sas controller support for hip08 SoC
* tag 'hisi-defconfig-for-4.14' of git://github.com/hisilicon/linux-hisi:
arm64: defconfig: enable DMA driver for hi3660
arm64: defconfig: enable OP-TEE
arm64: defconfig: enable support for serial port connected device
arm64: defconfig: enable CONFIG_SYSCON_REBOOT_MODE
arm64: defconfig: enable support hi6421v530 PMIC
arm64: defconfig: enable Kirin PCIe
arm64: defconfig: enable SCSI_HISI_SAS_PCI
Add the arm64 crypto drivers that have been added over the past
couple of kernel releases to its defconfig as modules.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enabling nop-xceiv PHY driver in the defconfig, needed for USB support
on A8K SoC based board.
Enabling fine-grained task level IRQ time accounting for ARMv8 as it was
already done for x86
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlmNg88ACgkQCwYYjhRyO9UgWwCeLnJikdCOF4YoN3fxw6NxNivN
cAwAn0z2IYh42j7UoBwxINih2byehBL8
=ZHwt
-----END PGP SIGNATURE-----
Merge tag 'mvebu-arm64-4.14-1' of git://git.infradead.org/linux-mvebu into next/arm64
Pull "mvebu arm64 for 4.14 (part 1)" from Gregory CLEMENT:
Enabling nop-xceiv PHY driver in the defconfig, needed for USB support
on A8K SoC based board.
Enabling fine-grained task level IRQ time accounting for ARMv8 as it was
already done for x86
* tag 'mvebu-arm64-4.14-1' of git://git.infradead.org/linux-mvebu:
arm64: defconfig: enable fine-grained task level IRQ time accounting
arm64: defconfig: enable nop-xceiv PHY driver
* compile ak4613 and renesas sound as modules
This is intended to reduce the size of a kernel image compiled
using the defconfig. This is timely as it brings the kernel image
back below the size that can be booted in my environment, a limit
it crept over in v4.13-rc1.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=PAs6
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-defconfig-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/arm64
Pull "Renesas ARM64 Based SoC Defconfig Updates for v4.14" from Simon Horman:
* compile ak4613 and renesas sound as modules
This is intended to reduce the size of a kernel image compiled
using the defconfig. This is timely as it brings the kernel image
back below the size that can be booted in my environment, a limit
it crept over in v4.13-rc1.
* tag 'renesas-arm64-defconfig-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: defconfig: compile ak4613 and renesas sound as modules
commit cee22a1505 ("workqueues: Introduce new flag WQ_POWER_EFFICIENT
for power oriented workqueues") introduced the concept of power
efficient workqueues (4 years back), but it was never enabled in
upstream kernel configs.
Power efficient workqueues are simply marked as "unbound," so that jobs
queued to them can run on any CPU in the system. It leaves the target
CPU selection to the scheduler, which is the best place for such
decision making. This improves power efficiency for workqueues which are
otherwise pinned to a CPU.
Enable it for ARM64 platforms as ARM platforms were the main target for
the introduction of power efficient workqueues.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch enables these configs:
+CONFIG_SERIAL_DEV_BUS=y
+CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
As example, a bluetooth device connected to UART port can be supported by
this.
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Enable HiSilicon SAS controller based on PCI device,
which is included in hip08 SoC.
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
The Allwinner A64 SoC is paired with the X-Powers AXP803 PMIC over the
Reduced Serial Bus (RSB). The regulators of this PMIC supply all power
rails of the SoC and many external peripherals.
Enable the driver for the regulators of this PMIC.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[wens@csie.org: refined commit message]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The Allwinner A64 SoC is paired with the X-Powers AXP803 PMIC over the
Reduced Serial Bus (RSB).
Enable the driver for this PMIC.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[wens@csie.org: Refined commit message]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Make the rockchip PHY driver built into the kernel.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tests showed, that under certain conditions, the summary number of jiffies
spent on softirq/idle, which are counted by system statistics can be even
below 10% of expected value, resulting in false load presentation.
The issue was observed on the quad-core Marvell Armada 8k SoC, whose two
10G ports were bound into L2 bridge. Load was controlled by bidirectional
UDP traffic, produced by a packet generator. Under such condition,
the dominant load is softirq. With 100% single CPU occupation or without
any activity (all CPUs 100% idle), total number of jiffies is 10000 (2500
per each core) in 10s interval. Also with other kind of load this was
true.
However below a saturation threshold it was observed, that with CPU which
was occupied almost by softirqs only, the statistic were awkward. See
the mpstat output:
CPU %usr %nice %sys %iowait %irq %soft %steal %guest %gnice %idle
all 0.00 0.00 0.13 0.00 0.00 0.55 0.00 0.00 0.00 99.32
0 0.00 0.00 0.00 0.00 0.00 23.08 0.00 0.00 0.00 76.92
1 0.00 0.00 0.40 0.00 0.00 0.00 0.00 0.00 0.00 99.60
2 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00
3 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00
Above would mean basically no total load, debug CPU0 occupied in 25%.
Raw statistics, printed every 10s from /proc/stat unveiled a root
cause - summary idle/softirq jiffies on loaded CPU were below 200,
i.e. over 90% samples lost. All problems were gone after enabling
fine granulity IRQ time accounting.
This patch fixes possible wrong statistics processing by enabling
CONFIG_IRQ_TIME_ACCOUNTING for arm64 platfroms, which is by
default done on other architectures, e.g. x86 and arm. Tests
showed no noticeable performance penalty, nor stability impact.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The hardware spinlock drivers now depend on HWSPINLOCK (instead of
selecting it), so we need to explicitly enable it after commit
35fc8a07d7 ("Make HWSPINLOCK a menuconfig to ease disabling")
Without HWSPINLOCK, various drivers are left with unsatisfied
dependencies and Qcom boards using shared memory based communication
to request regulators are failing to boot and mount rootfs.
Fix this by explicitly enabling HWSPINLOCK in defconfig.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Compile the renesas sound and ak4613 drivers as modules to reduce the ARM64
kernel size. These modules are currently only used by Renesas platforms so
there should little risk of negative impact of this change on other users.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
[simon: consolidated two patches into one]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This commit enables the nop-xceiv PHY driver, which is needed for USB
support to work on the MacchiatoBin platform (Marvell Armada 8K).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Changes to platform code for 64-bit ARM platforms.
Andreas Färber adds two new platforms with initial code: Realtek RTD1295
and Action Semi S900. Both are fairly similar chips, used mainly in
set-top-boxes, but with other possible applications, and additional
members in the respective product families that could be added in the
future. The code here is fairly minimal, as all the interesting parts
are in device drivers and dts files.
The Broadcom Vulcan platform gets dropped, as no products ever became
available, and Cavium integrated the platform under a new name.
Among some other defconfig changes, Timur Tabi enables a number of
options that are typically required for server platforms.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=771F
-----END PGP SIGNATURE-----
Merge tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC 64-bit updates from Arnd Bergmann:
"Changes to platform code for 64-bit ARM platforms.
Andreas Färber adds two new platforms with initial code: Realtek
RTD1295 and Action Semi S900. Both are fairly similar chips, used
mainly in set-top-boxes, but with other possible applications, and
additional members in the respective product families that could be
added in the future. The code here is fairly minimal, as all the
interesting parts are in device drivers and dts files.
The Broadcom Vulcan platform gets dropped, as no products ever became
available, and Cavium integrated the platform under a new name.
Among some other defconfig changes, Timur Tabi enables a number of
options that are typically required for server platforms"
* tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: defconfig: remove duplicate entry
arm64: defconfig: enable Qualcomm Technologies EMAC and some PHY drivers
arm64: defconfig: enable QCOM_L2_PMU and QCOM_L3_PMU
arm64: defconfig: enable EDAC options
arm64: defconfig: enable APEI and GHES features
arm64: defconfig: enable support for PCIe hotplug
arm64: defconfig: enable EFI_CAPSULE_LOADER
arm64: defconfig: enable BLK_DEV_NVME
arm64: defconfig: enable ACPI_CPPC_CPUFREQ
arm64: marvell: enable ICU and GICP drivers
arm64: marvell: enable the Armada 7K/8K pinctrl driver
arm64: Prepare Actions Semi S900
ARM64: defconfig: enable meson SPICC as module
ARM64: defconfig: enable IR core, decoders and Meson IR device
arm64: defconfig: enable Simple Sound Card support
arm64: defconfig: Enable ARCH_BRCMSTB
arm64: defconfig: drop ARCH_VULCAN
arm64: disable Broadcom Vulcan platform
MAINTAINERS: Add Realtek section
ARM64: Prepare Realtek RTD1295
The EMAC is present on Qualcomm Technologies' server and some mobile
chips, and is used as the primary Ethernet interface.
Systems that have these SOCs typically have an Atheros 803x or
Marvell 88e1111 PHY in them, so enable those drivers too.
Signed-off-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Now that the drivers are available, enable support for L2 and L3
performance monitoring Qualcomm Datacenter Technologies Centriq SoCs.
These PMU drivers provide support for performance optimization.
Signed-off-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable EDAC (Error Detection and Correction) support for ARM64 server
systems that feature it, so that user space applications can be
notified of memory errors.
Signed-off-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ARM64 server platforms can support ACPI Platform Error Interface (APEI)
and Generic Hardware Error Source (GHES) features, so enable them.
Platforms which support the firmware-first RAS error reporting model
require APEI and GHES functionality for the OS to receive and report
error records provided by the platform.
PCIe AER functionality is required for PCIe AER errors to be properly
reported and recovered from.
Signed-off-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Some ARM64 server systems support PCIe hotplug, so enable the options
for that.
Signed-off-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
CONFIG_EFI_CAPSULE_LOADER allows the user to update the EFI firmware,
which is useful on ARM64 server platforms.
Signed-off-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
NVME is non-volatile storage media attached via PCIe. NVME devices
typically have much higher potential throughput than other block
devices, like SATA, NVME is a must-have requirement for ARM64 based
servers.
Signed-off-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The CPPC CPUFreq driver is used on many ACPI-based ARM64 server systems.
Signed-off-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- enable meson SPICC as module
- enable IR core, decoders and Meson IR device
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=MTfE
-----END PGP SIGNATURE-----
Merge tag 'amlogic-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/arm64
Amlogic arm64 defconfig changes for v4.13
- enable meson SPICC as module
- enable IR core, decoders and Meson IR device
* tag 'amlogic-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM64: defconfig: enable meson SPICC as module
ARM64: defconfig: enable IR core, decoders and Meson IR device
Signed-off-by: Olof Johansson <olof@lixom.net>
following:
- Florian enables ARCH_BRCMSTB in the arm64 defconfig to get more build coverage
-----BEGIN PGP SIGNATURE-----
iQIcBAABCAAGBQJZPs3NAAoJEIfQlpxEBwcEkMQP/REAq/Mso8ChSoohC2xZekMs
qgW07yvitr4LrqF7gmYXTqrE+vLrHOK4anNztg4fGJO4+NbrNoiPiK8SUGUzrKSB
caPz4G/zn9rY3DbjeayZUcT1+DhbNCZ6eLLyqadHoBqBghUIpiNE34O+rDNErF6f
TnMptJYzSp4RdrgWDfQ9EMrRIF7atp3TLJKYm5SIvQg1sUNUen6Fff0l6x3gjqBZ
QR8/Pd6aGjyvZbyOEsFd4WqFr55UM9JtYj69iJwRtHaqmaZT+AztqNZrQhOmHVxS
GF2gWnCS3OIIJh9KHEKERC5mXDN2rL9ooQSDCsgBUjAXi3C0nI4MaRB89cn76SG8
0CCbb85hJqRf1qAoAX4r6qFHrkIumPSML9PNuHe9xEBQrnpkqzC/JtsnvuhsKrU3
xOzQ5HG3OFREJO5WlIXkoTboKbWr0hDRSDs28MZAJ5FyD0sfMrQNSsKFo8R6VXJP
omP2mNMpUt7o0TwlgtGv+ADCW7IxHEfyONQuFxCHJBiINf+sRSnuvMHWMPVDdMzU
vjTUtW5K4HmPhp7DXTWssQFNVG9fsX37CFFSWlnq+0r1qQSN624QqHr81xeNhezo
IXUhFLvDy8Rob0I9gH0I2cIMU+UazVFC3XJHisC1tTyo6OXU/HYWat8U4vOe4R/m
38H7iERBTSb2naSZTp7e
=EPCT
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.13/defconfig-arm64' of http://github.com/Broadcom/stblinux into next/arm64
This pull request contains ARM64 defconfig changes for 4.13, please pull the
following:
- Florian enables ARCH_BRCMSTB in the arm64 defconfig to get more build coverage
* tag 'arm-soc/for-4.13/defconfig-arm64' of http://github.com/Broadcom/stblinux:
arm64: defconfig: Enable ARCH_BRCMSTB
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch enable the SPI Communications Controller driver as module for the
Amlogic platform.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This patch enables the MEDIA Infrared RC Decoders and Meson Infrared
decoder for ARM64 defconfig.
These drivers are selected as modules by default.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[khilman: make RC_CORE modular too]
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
ARCH_BRCMSTB was one of the few platforms that were not enabled by
default, since we are now adding more and more drivers relevant to that
platform get some proper build coverage.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
ARCH_VULCAN (Broadcom Vulcan) has been discontinued and all its
dependencies have been moved to ARCH_THUNDER2. It can be dropped
from defconfig now.
Signed-off-by: Jayachandran C <jnair@caviumnetworks.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable some very core config options used on 64bit Rockchip socs.
As built-in driver enable the Rockchip spi driver as well as the
cros-ec-spi and cros-ec keyboard driver, as this may be helpful
in case an initrd does not work as expected and drops the user
into a shell. Another built-in is the fan53555 regulator driver,
as it and its register-compatible cousins Silergy syr827 and syr828
are often used on Rockchip socs as cpu-supply next to regular pmic.
The rest can be enabled as modules and contains the pcie host
controller and its phy, the sucessive approximation adc (saradc)
that gets often used for additional buttons on Rockchip boards
as well as the adc-keys Keyboard driver for these keys.
The cros-ec-pwm also can be a module, as it is normally only used to
drive display backlights as well as the Rockchip thermal controller
that allows to read the cpu and gpu temperatures and affect frequency
scaling if necessary.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable Qualcomm drivers needed to boot Dragonboard 410c with HDMI. This
enables support for clocks, regulators, and USB PHY.
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
[Olof: Turned off _RPM configs per follow-up email]
Signed-off-by: Olof Johansson <olof@lixom.net>
Sync the defconfig with savedefconfig as config options change/move over
time.
Generated with the following commands:
make defconfig
make savedefconfig
cp defconfig arch/arm64/configs/defconfig
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Changes to platform code for 64-bit ARM platforms.
Most of these are small changes to the one defconfig we use on arm64
(no per-platform configs there), to enable new drivers.
There are also a few other changes. Broadcom sold off their 'Vulcan'
design to Cavium, where it is now called ThunderX2. While we normally
don't rename stuff based on marketing's whims, it seemed appropriate to
bring in renames on a few things such as MAINTAINERS, etc.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=NJ8c
-----END PGP SIGNATURE-----
Merge tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC 64-bit changes from Olof Johansson:
"Changes to platform code for 64-bit ARM platforms.
Most of these are small changes to the one defconfig we use on arm64
(no per-platform configs there), to enable new drivers.
There are also a few other changes. Broadcom sold off their 'Vulcan'
design to Cavium, where it is now called ThunderX2. While we normally
don't rename stuff based on marketing's whims, it seemed appropriate
to bring in renames on a few things such as MAINTAINERS, etc"
* tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: sunxi: always enable reset controller
arm64: defconfig: enable the Safexcel crypto engine as a module
arm64: configs: enable SDHCI driver for Xenon
MAINTAINERS: Broadcom Vulcan is now Cavium ThunderX2
arm64: defconfig: add Allwinner USB PHY
arm64: defconfig: enable MVPP2
arm64: defconfig: Enable video, DRM and LPASS drivers for Exynos5433 and Exynos7
arm64: exynos: Enable Exynos PMU and PM domains drivers
arm64: only select PINCTRL for Allwinner platforms
arm64: set CONFIG_MMC_BCM2835=y in defconfig
arm64: defconfig: enable I2C_PXA
arm64: defconfig: enable MVNETA
ARM64: defconfig: enable the leds-pwm driver and default-on trigger
arm64: defconfig: Enable SH Mobile I2C controller
Select two new drivers for ARM64 mvebu SoCs:
- Xenon SDHCI controller on Armada 37xx and Armada 7K/8K
- Safexcel crypto engine on Armada 7K/8K
-----BEGIN PGP SIGNATURE-----
iIEEABECAEEWIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWO+j/yMcZ3JlZ29yeS5j
bGVtZW50QGZyZWUtZWxlY3Ryb25zLmNvbQAKCRALBhiOFHI71SnoAJ9r0d9MIBvq
3TWmgUDmImgaucJ5HACggm9+Jqh/GgXTBlxFnszhN9/BuCM=
=Le5K
-----END PGP SIGNATURE-----
Merge tag 'mvebu-defconfig64-4.12-2' of git://git.infradead.org/linux-mvebu into next/arm64
mvebu defconfig64 for 4.12 (part 2)
Select two new drivers for ARM64 mvebu SoCs:
- Xenon SDHCI controller on Armada 37xx and Armada 7K/8K
- Safexcel crypto engine on Armada 7K/8K
* tag 'mvebu-defconfig64-4.12-2' of git://git.infradead.org/linux-mvebu:
arm64: defconfig: enable the Safexcel crypto engine as a module
arm64: configs: enable SDHCI driver for Xenon
Signed-off-by: Olof Johansson <olof@lixom.net>
1. Exynos power management drivers support now ARMv8 SoC - Exynos5433 - so
select them in ARCH_EXYNOS.
2. Enable few Exynos drivers for supported ARMv8 SoCs.
-----BEGIN PGP SIGNATURE-----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=lXKo
-----END PGP SIGNATURE-----
Merge tag 'samsung-soc64-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/arm64
Samsung ARM64 update for v4.12:
1. Exynos power management drivers support now ARMv8 SoC - Exynos5433 - so
select them in ARCH_EXYNOS.
2. Enable few Exynos drivers for supported ARMv8 SoCs.
* tag 'samsung-soc64-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: defconfig: Enable video, DRM and LPASS drivers for Exynos5433 and Exynos7
arm64: exynos: Enable Exynos PMU and PM domains drivers
Signed-off-by: Olof Johansson <olof@lixom.net>
Two patches to change our Kconfig option and add new options in the
defconfig.
-----BEGIN PGP SIGNATURE-----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=twCP
-----END PGP SIGNATURE-----
Merge tag 'sunxi-config64-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/arm64
Allwinner arm64 config changes for 4.12
Two patches to change our Kconfig option and add new options in the
defconfig.
* tag 'sunxi-config64-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: defconfig: add Allwinner USB PHY
arm64: only select PINCTRL for Allwinner platforms
Signed-off-by: Olof Johansson <olof@lixom.net>
The Safexcel EIP197 cryptographic engine is used on some Marvell SoCs,
such as Armada 7040 and Armada 8040. Enable this driver as a module in
the ARM64 defconfig.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
This patch enables the driver for the SDHCI controller found on the
Marvell Armada 3700 and 7K/8K ARM64 SoCs.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Kdump is enabled by default as kexec is.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
4.12, please pull the following:
- Gerd enables the BCM2835 MMC driver which yields better performance than the
default one (iProc)
-----BEGIN PGP SIGNATURE-----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=KRAt
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.12/defconfig-arm64' of http://github.com/Broadcom/stblinux into next/arm64
Pull "Broadcom defconfig-arm64 changes for 4.12" from Florian Fainelli:
This pull request contains Broadcom ARM64-based SoCs defconfig updates for
4.12, please pull the following:
- Gerd enables the BCM2835 MMC driver which yields better performance than the
default one (iProc)
* tag 'arm-soc/for-4.12/defconfig-arm64' of http://github.com/Broadcom/stblinux:
arm64: set CONFIG_MMC_BCM2835=y in defconfig
Update arm64 defconfig by adding MVPP2 for Marvell Armada 7K/8K and
MVNETA and I2C_PXA for Armada 37xx.
-----BEGIN PGP SIGNATURE-----
iIEEABECAEEWIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWNVU1SMcZ3JlZ29yeS5j
bGVtZW50QGZyZWUtZWxlY3Ryb25zLmNvbQAKCRALBhiOFHI71fVYAJ9Yp1KsFB7n
e2/64YGab3J5nQMFKwCeNQFTo4tZeU1Bnew1V83xfFpLXPQ=
=pCdd
-----END PGP SIGNATURE-----
Merge tag 'mvebu-defconfig64-4.12-1' of git://git.infradead.org/linux-mvebu into next/arm64
Pull "mvebu defconfig64 for 4.12 (part 1)" from Gregory CLEMENT:
Update arm64 defconfig by adding MVPP2 for Marvell Armada 7K/8K and
MVNETA and I2C_PXA for Armada 37xx.
* tag 'mvebu-defconfig64-4.12-1' of git://git.infradead.org/linux-mvebu:
arm64: defconfig: enable MVPP2
arm64: defconfig: enable I2C_PXA
arm64: defconfig: enable MVNETA
The arm64 defconfig covers the Allwinner A64 SoC boards quite well,
but USB support is not enabled.
Add the PHY config symbol to allow defconfig kernels to use USB.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The MVPP2 network driver is used for the ARM64 Marvell Armada 7K and 8K
platforms, so enable it in the arm64 defconfig.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Enable drivers specific to Exynos5433 and Exynos7:
1. MFD Low Power Audio SubSystem (LPASS),
2. DRM drivers (DECON display, outputs),
3. Drivers for video-related sub-blocks (JPEG, Multi Format Codec,
GScaler).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
We need to enable this controller so that we can switch the SD card's
pinmux over to it by default, which will improve storage performance.
Read access (dd with 64k blocks on rpi2):
CONFIG_MMC_SDHCI_IPROC: 11-12 MB/s
CONFIG_MMC_BCM2835: 19-20 MB/s
Differences on write access are pretty much in the noise.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Now that the Armada 37xx SoCs support the mvneta driver, enable it by
default. It is especially useful when booting on an NFS root.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
This enables the leds-pwm driver to support LEDs which are PWM-powered
(and thus dimmable). Additionally we have to enable the "default-on"
trigger - this was not required before because the gpio-leds driver has
a separate "default-state" property which can be used to enable the LED
by default.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Enable SH Mobile I2C controller for use on R-Car Gen3 SoCs.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Defconfig additions, removals, etc. Almost all of them just turn on
drivers that we want on some platform, usually after the driver
has been merged into mainline.
There is now a new defconfig file for tango4.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=noKQ
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig updates from Arnd Bergmann:
"Defconfig additions, removals, etc. Almost all of them just turn on
drivers that we want on some platform, usually after the driver has
been merged into mainline.
There is now a new defconfig file for tango4"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits)
ARM: multi_v7_defconfig: enable pstore configs
ARM: multi_v7_defconfig: enable some newly added crypto modules
ARM: davinci_all_defconfig: enable SATA modules
arm64: defconfig: enable CONFIG_MTD_NAND and CONFIG_MTD_NAND_DENALI_DT
arm64: defconfig: enable CONFIG_MTD_BLOCK
ARM: Import tango4_defconfig
ARM: omap2plus_defconfig: Enable support for RTC M41T80
ARM: omap2plus_defconfig: Enable support for micrell phys
ARM: vf610m4: defconfig: enable EXT4 filesystem
ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6
arm64: defconfig: Enable NUMA and NUMA_BALANCING
arm64: defconfig: enable SMMUv3 config
ARM: davinci_all_defconfig: enable iio
ARM: Keystone: Enable ARCH_HAS_RESET_CONTROLLER
ARM: configs: stm32: Add RTC support in STM32 defconfig
ARM: defconfig: qcom: add APQ8060 DragonBoard devices
ARM: qcom_defconfig: enable thermal sensors
ARM: qcom_defconfig: add ahci configs
ARM: qcom_defconfig: add pcie and atl1c ethernet configs
ARM: qcom_defconfig: add usb related configs
...
Changes to platform code for 64-bit ARM platforms, only trivial
stuff this time, a few defconfig changes to enable drivers, and
a new entry for the Cavium ThunderX2 platform.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Ymi+
-----END PGP SIGNATURE-----
Merge tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC 64-bit updates from Arnd Bergmann:
"Changes to platform code for 64-bit ARM platforms, only trivial stuff
this time, a few defconfig changes to enable drivers, and a new entry
for the Cavium ThunderX2 platform"
* tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
MAINTAINERS: Add Cavium ThunderX2 entry
arm64: add ARCH_THUNDER2 to defconfig
arm64: add THUNDER2 processor family
MAINTAINERS: Extend ARM/Mediatek SoC support section
arm64: defconfig: enable CONFIG_MMC_SDHCI_CADENCE
arm64: defconfig: enable XORv2 for Marvell Armada 7K/8K
The PMULL based CRC32 implementation already contains code based on the
separate, optional CRC32 instructions to fallback to when operating on
small quantities of data. We can expose these routines directly on systems
that lack the 64x64 PMULL instructions but do implement the CRC32 ones,
which makes the driver that is based solely on those CRC32 instructions
redundant. So remove it.
Note that this aligns arm64 with ARM, whose accelerated CRC32 driver
also combines the CRC32 extension based and the PMULL based versions.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This will allow the default kernel build to boot on Cavium ThunderX2
CN99XX processors.
Signed-off-by: Jayachandran C <jnair@caviumnetworks.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the NAND framework and the Denali NAND controller driver.
This NAND controller is used on UniPhier SoCs.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable the block layer support for MTD devices.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable the Cadence SD/SDIO/eMMC controller. This is used on
Socionext UniPhier SoC family.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Since much more arm64 SoCs with numa nodes, it's better to enable
NUMA and NUMA_BALANCING to improve the performance on test.
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Update arm64 defconfig by adding XORv2 for Marvell Armada 7K/8K
-----BEGIN PGP SIGNATURE-----
iIEEABECAEEWIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWHkE/iMcZ3JlZ29yeS5j
bGVtZW50QGZyZWUtZWxlY3Ryb25zLmNvbQAKCRALBhiOFHI71XkoAJ9NBtmwvDxp
Rqi2aEq7ki6oU/jybwCdG0CYDLRyzoR4HKVy0mVtgnsMnLw=
=lET3
-----END PGP SIGNATURE-----
Merge tag 'mvebu-defconfig64-4.11-1' of git://git.infradead.org/linux-mvebu into next/arm64
mvebu defconfig64 for 4.11 (part 1)
Update arm64 defconfig by adding XORv2 for Marvell Armada 7K/8K
* tag 'mvebu-defconfig64-4.11-1' of git://git.infradead.org/linux-mvebu:
arm64: defconfig: enable XORv2 for Marvell Armada 7K/8K
Signed-off-by: Olof Johansson <olof@lixom.net>
This commit enables the XORv2 DMA driver, which is used on the ARM64
Marvell Armada 7K and 8K platforms.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Changes to platform code for 64-bit ARM platforms. We are not adding
any new platforms that require code or Kconfig changes this time, so
it's basically just defconfig changes to enable support for more
drivers used on the existing platforms.
This is mainly interesting for the Raspberry Pi 3, which should
now work much better with the default build.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=B+Lz
-----END PGP SIGNATURE-----
Merge tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC 64-bit updates from Arnd Bergmann:
"Changes to platform code for 64-bit ARM platforms. We are not adding
any new platforms that require code or Kconfig changes this time, so
it's basically just defconfig changes to enable support for more
drivers used on the existing platforms.
This is mainly interesting for the Raspberry Pi 3, which should now
work much better with the default build"
* tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: defconfig: drop GPIO_SYSFS on multiplatforms
arm64: defconfig: Do not lower CONFIG_LOG_BUF_SHIFT
arm64: defconfig: allow rk3399-based boards to boot from mmc and usb
arm64: defconfig: enable RK808 components
arm64: defconfig: enable I2C and DW MMC controller on rockchip platform
arm64: defconfig: Enable Tegra186 SoC
ARM64: configs: Activate Internal PHY for Meson GXL
arm64: qcom: enable GPIOLIB in Kconfig
arm64: configs: enable configs for msm899(2/4) basic support
ARM64: bcm2835: add thermal driver to default config
ARM64: configs: Add Platform MHU in defconfig
MAINTAINERS: Update Broadcom Vulcan maintainer email
arm64: defconfig: enable EEPROM_AT25 config option
arm64: Enable HIBERNATION in defconfig
arm64: defconfig: Enable DRM DU and V4L2 FCP + VSP modules
ARM64: defconfig: Enable MMC related configs
arm64: Add BCM2835 (Raspberry Pi 3) support to the defconfig
- struct thread_info moved off-stack (also touching
include/linux/thread_info.h and include/linux/restart_block.h)
- cpus_have_cap() reworked to avoid __builtin_constant_p() for static
key use (also touching drivers/irqchip/irq-gic-v3.c)
- Uprobes support (currently only for native 64-bit tasks)
- Emulation of kernel Privileged Access Never (PAN) using TTBR0_EL1
switching to a reserved page table
- CPU capacity information passing via DT or sysfs (used by the
scheduler)
- Support for systems without FP/SIMD (IOW, kernel avoids touching these
registers; there is no soft-float ABI, nor kernel emulation for
AArch64 FP/SIMD)
- Handling of hardware watchpoint with unaligned addresses, varied
lengths and offsets from base
- Use of the page table contiguous hint for kernel mappings
- Hugetlb fixes for sizes involving the contiguous hint
- Remove unnecessary I-cache invalidation in flush_cache_range()
- CNTHCTL_EL2 access fix for CPUs with VHE support (ARMv8.1)
- Boot-time checks for writable+executable kernel mappings
- Simplify asm/opcodes.h and avoid including the 32-bit ARM counterpart
and make the arm64 kernel headers self-consistent (Xen headers patch
merged separately)
- Workaround for broken .inst support in certain binutils versions
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=8Uk9
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- struct thread_info moved off-stack (also touching
include/linux/thread_info.h and include/linux/restart_block.h)
- cpus_have_cap() reworked to avoid __builtin_constant_p() for static
key use (also touching drivers/irqchip/irq-gic-v3.c)
- uprobes support (currently only for native 64-bit tasks)
- Emulation of kernel Privileged Access Never (PAN) using TTBR0_EL1
switching to a reserved page table
- CPU capacity information passing via DT or sysfs (used by the
scheduler)
- support for systems without FP/SIMD (IOW, kernel avoids touching
these registers; there is no soft-float ABI, nor kernel emulation for
AArch64 FP/SIMD)
- handling of hardware watchpoint with unaligned addresses, varied
lengths and offsets from base
- use of the page table contiguous hint for kernel mappings
- hugetlb fixes for sizes involving the contiguous hint
- remove unnecessary I-cache invalidation in flush_cache_range()
- CNTHCTL_EL2 access fix for CPUs with VHE support (ARMv8.1)
- boot-time checks for writable+executable kernel mappings
- simplify asm/opcodes.h and avoid including the 32-bit ARM counterpart
and make the arm64 kernel headers self-consistent (Xen headers patch
merged separately)
- Workaround for broken .inst support in certain binutils versions
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (60 commits)
arm64: Disable PAN on uaccess_enable()
arm64: Work around broken .inst when defective gas is detected
arm64: Add detection code for broken .inst support in binutils
arm64: Remove reference to asm/opcodes.h
arm64: Get rid of asm/opcodes.h
arm64: smp: Prevent raw_smp_processor_id() recursion
arm64: head.S: Fix CNTHCTL_EL2 access on VHE system
arm64: Remove I-cache invalidation from flush_cache_range()
arm64: Enable HIBERNATION in defconfig
arm64: Enable CONFIG_ARM64_SW_TTBR0_PAN
arm64: xen: Enable user access before a privcmd hvc call
arm64: Handle faults caused by inadvertent user access with PAN enabled
arm64: Disable TTBR0_EL1 during normal kernel execution
arm64: Introduce uaccess_{disable,enable} functionality based on TTBR0_EL1
arm64: Factor out TTBR0_EL1 post-update workaround into a specific asm macro
arm64: Factor out PAN enabling/disabling into separate uaccess_* macros
arm64: Update the synchronous external abort fault description
selftests: arm64: add test for unaligned/inexact watchpoint handling
arm64: Allow hw watchpoint of length 3,5,6 and 7
arm64: hw_breakpoint: Handle inexact watchpoint addresses
...
to basically boot.
-----BEGIN PGP SIGNATURE-----
iQEtBAABCAAXBQJYNvxvEBxoZWlrb0BzbnRlY2guZGUACgkQ86Z5yZzRHYH13Af9
GN3Rx9JrPOKxmp8yQrjf2IvtbRCNcyJsYAcT2C33KFrT+jZE087i+BdMZ9cniwr/
Y3w2JLyi6DS2aeoEZnYDsSQiBNudKKOeyDih5uI+oFDPQfmmfPfjuJUW5NrnpHSd
SLmXADAwjkB46o7Z1gFwquhXB+LcxjsYE5eu7Eda4pSHuBw2ZtNMMrZNDujJx/vU
zu36utDBWYFx6yMx32U1TYz3pf9cbi784j/Y5wr1zSCmuOgS2AZpl8KFC//92ZtU
Wi8T3sRBupun99/pVj+xvWtB9aHdWr8QxeVkRIUhx5XpM7njy9rX7QcJIDMm4kBf
uSbKZCh/uAjRjT/TpQiOsw==
=Fv2o
-----END PGP SIGNATURE-----
Merge tag 'v4.10-rockchip-defconfig64' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/arm64
Pull "Rockchip defconfig64 changes for 4.10" from Heiko Stübner:
64bit defconfig changes to allow arm64 Rockchip socs
to basically boot.
* tag 'v4.10-rockchip-defconfig64' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: defconfig: allow rk3399-based boards to boot from mmc and usb
arm64: defconfig: enable RK808 components
arm64: defconfig: enable I2C and DW MMC controller on rockchip platform
The sysfs ABI to GPIO is marked obsolete and should not be
encouraged. Users should be encouraged to switch to using the
character device.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
please pull the following changes:
- Eric updates the ARMv8 defconfig to contain everything that is needed to run
a 64-bit kernel on the Raspberry Pi 3
- Scott enables the standard AT25 EEPROM driver as module for the ARM64 defconfig
- Martin enables the Raspberry Pi Thermal driver in the ARM64 defconfig
-----BEGIN PGP SIGNATURE-----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=mWnY
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.10/defconfig-arm64' of http://github.com/Broadcom/stblinux into next/arm64
Pull "Broadcom defconfig-arm64 changes for 4.10" from Florian Fainelli:
This pull request contains Broadcom ARM64-based SoCs defconfig changes for 4.10,
please pull the following changes:
- Eric updates the ARMv8 defconfig to contain everything that is needed to run
a 64-bit kernel on the Raspberry Pi 3
- Scott enables the standard AT25 EEPROM driver as module for the ARM64 defconfig
- Martin enables the Raspberry Pi Thermal driver in the ARM64 defconfig
* tag 'arm-soc/for-4.10/defconfig-arm64' of http://github.com/Broadcom/stblinux:
ARM64: bcm2835: add thermal driver to default config
arm64: defconfig: enable EEPROM_AT25 config option
arm64: Add BCM2835 (Raspberry Pi 3) support to the defconfig
The default value of 17 for CONFIG_LOG_BUF_SHIFT is much more suitable
than 14. The latter easily leads to lost kernel messages on systems with
only one CPU core.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Enable additional options necessary to boot rk3399-based boards to
boot from either emmc or usb devices, like the arasan sdhci and its phy
as well as the usb2 phy and general rockchip power-domain support.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Many rockchip based arm64 boards use RK808 as PMIC, so
enabe it here let the board bootup normally.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
[added rk808-rtc as module and rk808-clk output built in]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
I2C and MMC are very basic modules for a board to bootup, as I2C always
used to configure PMIC and MMC devices often used to store filesytem.
So enable them here to let the rockchip based arm64 boards can bootup.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Given the mimimal hardware support for msm899(2/4) currently.
A few config options are needed to allow for continued
development and booting.
The following are needed for continued development and
booting:
-8994 pinctrl for serial support
-Enable Global Glock Controller (gcc)
Signed-off-by: Jeremy McNicoll <jeremymc@redhat.com>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add the thermal driver for bcm2837 to list of compiled modules
in the default config.
Changelog:
V7 -> V8: rebased
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
* Enable R-Car DU and related drivers as modules in defconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Ztt2
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-defconfig-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/arm64
Renesas ARM64 Based SoC Defconfig Updates for v4.10
* Enable R-Car DU and related drivers as modules in defconfig
* tag 'renesas-arm64-defconfig-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: defconfig: Enable DRM DU and V4L2 FCP + VSP modules
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable support for on board SPI EEPROM by setting
CONFIG_EEPROM_AT25=m
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This patch adds CONFIG_HIBERNATION to the arm64 defconfig.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Extend the ARM64 defconfig to enable the DU DRM device as module
together with required dependencies of V4L2 FCP and VSP modules.
This enables VGA output on the r8a7795 Salvator-X board.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Enable MMC related defaults configs for MMC, PWM and PWM clock.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Most of the drivers are included as modules, except for serial (needed
for early console), WDT (required for reboot), and the dependency
chain of RASPBERRYPI_POWER (which is currently not buildable as a
module, but should be changed).
Signed-off-by: Eric Anholt <eric@anholt.net>
Enable CONFIG_GPIO_XGENE_SB.
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: Quan Nguyen <qnguyen@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Enable ZTE ZX family support in arm64 defconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJX25FiAAoJEFBXWFqHsHzOzJ4IAKAxI7W3Ubnhdxdu8akLYm6a
VHtnqSyr43kKCUEbg05+oTmPzXVF7YdnYmZpyy2mhA9+wpGC6vSwtSDM6Tj8KN8H
ZGzR5Op94GPN3RnLRyGlplltMEbH4I8l6A7SsiJ5VB4Uab2x4bmBagW/vG0O+XuP
exzGQoqlrI5N2gmiSf6P+2Y1oEM+JvClvWPdb9zkMb0B4i8kNJgh+efyNaCv7m/R
v0s9f9AhhK3Saj2TSaJuGuZNHw9vZpDUiOuyTOvnc35bJLjy0AsWqw4BfK8NegQE
4tgXiyVdZxOHvUtAQgw7b2Wkcxo+407zDJE1q6HxR2uudpuTHm0hyWxN62MuXm8=
=zgWs
-----END PGP SIGNATURE-----
Merge tag 'zte-defconfig64-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/arm64
Pull "ZTE arm64 defconfig updates for 4.9" from Shawn Guo:
- Enable ZTE ZX family support in arm64 defconfig
* tag 'zte-defconfig64-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: enable ZTE ZX related config
Enable common modules for power management; one is to enable
CPUFREQ_DT driver; the driver is used by many platforms by passing OPP
table from device tree.
Also enables thermal related drivers. Firstly we need enable
configuration CPU_THERMAL for CPU cooling device driver, this will bind
thermal zone with CPU cooling device; and enable 'power allocator'
thermal governor.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- add PCIe driver for Aardvark for Armada 3700
- enable xhci-platform for A7K/A8K
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlfMQewACgkQCwYYjhRyO9WrKgCeJWuHOFUlMYoZqEYKkdA5aJ9G
iPsAoIFQivT7yCn9p7rJKzKt2NI4skoy
=jIwM
-----END PGP SIGNATURE-----
Merge tag 'mvebu-defconfig64-4.9-1' of git://git.infradead.org/linux-mvebu into next/arm64
Pull "mvebu defconfig64 for 4.9 (part 1)" from Gregory CLEMENT:
- add PCIe driver for Aardvark for Armada 3700
- enable xhci-platform for A7K/A8K
* tag 'mvebu-defconfig64-4.9-1' of git://git.infradead.org/linux-mvebu:
arm64: configs: enable PCIe driver for Aardvark
arm64: defconfig: enable xhci-platform
drivers/char/hw_random/Kconfig has 'default m', so
simply removing this entry from the defconfig will
enable building HW random drivers as modules.
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Enable hisilicon SAS and XGE for hip05 and hip06
- Enable drm, powerkey, bluetooth and adv7511/adv7533 for hikey
- Add PINCTRL to HISI platform
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=y80h
-----END PGP SIGNATURE-----
Merge tag 'hisi-defconfig-for-4.9' of git://github.com/hisilicon/linux-hisi into next/arm64
Pull "ARM64: hisilicon: defconfig updates for 4.9" from Wei Xu:
- Enable hisilicon SAS and XGE for hip05 and hip06
- Enable drm, powerkey, bluetooth and adv7511/adv7533 for hikey
- Add PINCTRL to HISI platform
* tag 'hisi-defconfig-for-4.9' of git://github.com/hisilicon/linux-hisi:
Kconfig: ARCH_HISI: Add PINCTRL to HISI platform
arm64: defconfig: enable bluetooth supports as modules
arm64: defconfig: enable CONFIG_INPUT_HISI_POWERKEY for HiKey
arm64: defconfig: Enable HiSilicon kirin drm, adv7533 for HiKey
arm64: defconfig: Enable Hisi SAS and HNS
This allows use of the SDHI SD/SDIO controller present on R-Car Gen3 SoCs
and already enabled in the DT of the r8a7795/salvator-x (H3).
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Dien Pham