Commit Graph

105 Commits

Author SHA1 Message Date
Edward Cree 93841000ed sfc: remove duplicate declaration of efx_enqueue_skb_tso()
Define it in nic_common.h, even though the ef100 driver will have a
 different implementation backing it (actually a WARN_ON_ONCE as it
 should never get called by ef100.  But it needs to still exist because
 common TX path code references it).

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-30 13:09:09 -07:00
Edward Cree 850b722756 sfc: commonise drain event handling
Avoids a call from generic MCDI code into ef10.c.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-29 17:37:49 -07:00
Edward Cree 9043f48fd3 sfc: split up nic.h
The new nic_common.h contains the inlines for NIC-type function dispatch,
 declarations for NIC-generic functions in nic.c, and other similar NIC-
 generic functionality.  Retained in nic.h are NIC-specific declarations
 such as the siena and ef10 nic_data structs and various farch functions.

The EF100 driver will thus include nic_common.h but not nic.h.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-29 17:37:48 -07:00
Edward Cree d3142c193d sfc: refactor EF10 stats handling
Separate the generation-count handling from the format conversion, to
 make it easier to re-use both for EF100.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-29 17:37:48 -07:00
Edward Cree dbf2c66906 sfc: move rx_rss_context_exclusive into struct efx_mcdi_filter_table
It's both set and used solely by mcdi_filters.c, so there's no reason
 for it to be in ef10-specific nic_data.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-11 13:31:49 -07:00
Edward Cree e4fe938cff sfc: move 'must restore' flags out of ef10-specific nic_data
Common code in mcdi_filters.c uses these flags, so by moving them to
 either struct efx_nic (in the case of must_realloc_vis) or struct
 efx_mcdi_filter_table (for must_restore_rss_contexts and
 must_restore_filters), decouple this code from ef10's nic_data.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-11 13:31:49 -07:00
Edward Cree dfcabb0788 sfc: move vport_id to struct efx_nic
Remove some usage of ef10-specific nic_data structs from common MCDI
 functions, in preparation for using them from a non-EF10 driver.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-11 13:31:49 -07:00
Alex Maftei (amaftei) e1253f3910 sfc: add new headers in preparation for code split
New headers contain prototypes of functions that will be common between
ef10 and upcoming driver.
Removed static modifier from the affected functions.
Some function prototypes were removed from existing headers.

Signed-off-by: Alexandru-Mihai Maftei <amaftei@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-08 13:28:02 -08:00
Ben Hutchings edf4579123 sfc: Remove unnecessary dependencies on I2C
Only the SFC4000 code, now moved to sfc-falcon, needed I2C.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02 16:23:18 -08:00
Thomas Gleixner d2912cb15b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:55 +02:00
Bert Kenward 458bd99e49 sfc: remove ctpio_dmabuf_start from stats
The ctpio_dmabuf_start entry is not actually a stat and shouldn't
be exposed to ethtool.

Fixes: 2c0b6ee837 ("sfc: expose CTPIO stats on NICs that support them")
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-04 12:07:22 -04:00
Edward Cree e0a65e3c5e sfc: protect list of RSS contexts under a mutex
Otherwise races are possible between ethtool ops and
 efx_ef10_rx_restore_rss_contexts().
Also, don't try to perform the restore on every reset, only after an MC
 reboot, otherwise we'll leak RSS contexts on the NIC.

Fixes: 42356d9a13 ("sfc: support RSS spreading of ethtool ntuple filters")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 13:33:20 -04:00
Edward Cree 3af0f34290 sfc: replace asynchronous filter operations
Instead of having an efx->type->filter_rfs_insert() method, just use
 workitems with a worker function that calls efx->type->filter_insert().
The only user of this is efx_filter_rfs(), which now queues a call to
 efx_filter_rfs_work().
Similarly, efx_filter_rfs_expire() is now a worker function called on a
 new channel->filter_work work_struct, so the method
 efx->type->filter_rfs_expire_one() is no longer called in atomic context.
 We also add a new mutex efx->rps_mutex to protect the RPS state (efx->
 rps_expire_channel, efx->rps_expire_index, and channel->rps_flow_id) so
 that the taking of efx->filter_lock can be moved to
 efx->type->filter_rfs_expire_one().
Thus, all filter table functions are now called in a sleepable context,
 allowing them to use sleeping locks in a future patch.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 13:33:19 -04:00
Edward Cree 42356d9a13 sfc: support RSS spreading of ethtool ntuple filters
Use a linked list to associate user-facing context IDs with FW-facing
 context IDs (since the latter can change after an MC reset).

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-08 21:54:52 -05:00
Martin Habets c1d0d33946 sfc: MAC TX timestamp handling on the 8000 series
TX timestamps on 8000 series are supplied from the MAC. This timestamp is
 only 48 bits long. The high order bits from the last time sync event are
 used for the top 16 bits.

Signed-off-by: Martin Habets <mhabets@solarflare.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25 16:05:14 -05:00
Martin Habets 50663fe180 sfc: only enable TX timestamping if the adapter is licensed for it
If we try to enable the feature and do not have the license for it, the
 MCPU will refuse and fail our TX queue init.

Signed-off-by: Martin Habets <mhabets@solarflare.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25 16:05:14 -05:00
Martin Habets 9c3afb33ae sfc: add function to determine which TX timestamping method to use
Use MC capability MC_CMD_GET_CAPABILITIES_V2_OUT_TX_MAC_TIMESTAMPING to
 detect whether the NIC supports timestamping packets sent out the main
 datapath.

Signed-off-by: Martin Habets <mhabets@solarflare.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25 16:05:14 -05:00
Martin Habets b9b603d46d sfc: handle TX timestamps in the normal data path
Before this work, TX timestamping is done by sending each SKB to the MC.
On the 8000 series (Medford1) we have high speed timestamping via the
 MAC, which means we can use normal TX queues for this without a
 significant drop in bandwidth.  On the X2000 series (Medford2) support
 for transmitting via the MC is removed, so the new way must be used.

This patch enables timestamping on a TX queue, if requested.
It also enhances TX event handling to process the extra completion events,
 and puts the time in the SKB.

Signed-off-by: Martin Habets <mhabets@solarflare.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25 16:05:13 -05:00
Bert Kenward 2c0b6ee837 sfc: expose CTPIO stats on NICs that support them
While the Linux driver doesn't use CTPIO ('cut-through programmed I/O'),
 other drivers on the same port might, so if we're responsible for
 reporting per-port stats we need to include the CTPIO stats.

Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-21 15:14:27 -05:00
Edward Cree f411b54d6b sfc: expose FEC stats on Medford2
There's no explicit capability bit, so we just condition them on having
 efx->num_mac_stats >= MC_CMD_MAC_NSTATS_V2.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-21 15:14:26 -05:00
Mark Rutland 6aa7de0591 locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE()
Please do not apply this to mainline directly, instead please re-run the
coccinelle script shown below and apply its output.

For several reasons, it is desirable to use {READ,WRITE}_ONCE() in
preference to ACCESS_ONCE(), and new code is expected to use one of the
former. So far, there's been no reason to change most existing uses of
ACCESS_ONCE(), as these aren't harmful, and changing them results in
churn.

However, for some features, the read/write distinction is critical to
correct operation. To distinguish these cases, separate read/write
accessors must be used. This patch migrates (most) remaining
ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following
coccinelle script:

----
// Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and
// WRITE_ONCE()

// $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch

virtual patch

@ depends on patch @
expression E1, E2;
@@

- ACCESS_ONCE(E1) = E2
+ WRITE_ONCE(E1, E2)

@ depends on patch @
expression E;
@@

- ACCESS_ONCE(E)
+ READ_ONCE(E)
----

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: davem@davemloft.net
Cc: linux-arch@vger.kernel.org
Cc: mpe@ellerman.id.au
Cc: shuah@kernel.org
Cc: snitzer@redhat.com
Cc: thor.thayer@linux.intel.com
Cc: tj@kernel.org
Cc: viro@zeniv.linux.org.uk
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-25 11:01:08 +02:00
Bert Kenward 42e6cae1b3 sfc: revert changes to NIC revision numbers
The revision enum values (eg EFX_REV_HUNT_A0) form part of our API,
 and are included in ethtool. If these are inconsistent then ethtool
 will print garbage for a register dump (ethtool -d).

Fixes: 5a6681e22c ("sfc: separate out SFC4000 ("Falcon") support into new sfc-falcon driver")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-12 12:22:53 -04:00
Jon Cooper e5fbd97764 sfc: configure UDP tunnel offload ports
Implement ndo_udp_tunnel_{add,del} to update the NIC's list of VXLAN and
 GENEVE UDP ports.  Also reset the port list to empty on driver load and
 on driver unload, with appropriate flag set on the unload case.
These port numbers are used for RX inner checksum offload, and in future
 will also be used for TX inner checksum offload and encapsulated TSO.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 16:47:53 -05:00
Edward Cree a707d18851 sfc: read back RX hash config from the NIC when querying it with ethtool -x
Ensures that we report the key and indirection table the NIC is using,
 rather than (if setting them failed earlier) what we wanted it to use.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-17 15:49:52 -05:00
Edward Cree c634700f7e sfc: get PIO buffer size from the NIC
The 8000 series SFC NICs have 4K PIO buffers, rather than the 2K of
 the 7000 series.  Rather than having a hard-coded PIO buffer size
 (ER_DZ_TX_PIOBUF_SIZE), read it from the GET_CAPABILITIES_V2 MCDI
 response.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-16 14:00:46 -05:00
Edward Cree de1deff994 sfc: allow PIO more often
If an option descriptor has been sent on a queue but not followed by a
 packet, there will have been no completion event, so the read and write
 counts won't match and we'll think we can't do PIO.  This combines with
 the fact that we have two TX queues (for en/disable checksum offload),
 and that both must be empty for PIO to happen.
This patch adds a separate "packet_write_count" that tracks the most
 recent write_count we expect to see a completion event for; this excludes
 option descriptors but _includes_ PIO descriptors (even though they look
 like option descriptors).  This is then used, rather than write_count,
 in efx_nic_tx_is_empty().
We only bother to maintain packet_write_count on EF10, since on Siena
 (a) there are no option descriptors and it always equals write_count, and
 (b) there's no PIO, so we don't need it anyway.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-16 14:00:46 -05:00
Edward Cree 5a6681e22c sfc: separate out SFC4000 ("Falcon") support into new sfc-falcon driver
Rationale: The differences between Falcon and Siena are in many ways larger
 than those between Siena and EF10 (despite Siena being nominally "Falcon-
 architecture"); for instance, Falcon has no MCPU, so there is no MCDI.
 Removing Falcon support from the sfc driver should simplify the latter,
 and avoid the possibility of Falcon support being broken by changes to sfc
 (which are rarely if ever tested on Falcon, it being end-of-lifed hardware).

The sfc-falcon driver created in this changeset is essentially a copy of the
 sfc driver, but with Siena- and EF10-specific code, including MCDI, removed
 and with the "efx_" identifier prefix changed to "ef4_" (for "EFX 4000-
 series") to avoid collisions when both drivers are built-in.

This changeset removes Falcon from the sfc driver's PCI ID table; then in
 sfc I've removed obvious Falcon-related code: I removed the Falcon NIC
 functions, Falcon PHY code, and EFX_REV_FALCON_*, then fixed up everything
 that referenced them.

Also, increment minor version of both drivers (to 4.1).

For now, CONFIG_SFC selects CONFIG_SFC_FALCON, so that updating old configs
 doesn't cause Falcon support to disappear; but that should be undone at
 some point in the future.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30 10:16:58 -05:00
Bert Kenward e9117e5099 sfc: Firmware-Assisted TSO version 2
Add support for FATSOv2 to the driver. FATSOv2 offloads far more of the task
 of TCP segmentation to the firmware, such that we now just pass a single
 super-packet to the NIC. This means TSO has a great deal in common with a
 normal DMA transmit, apart from adding a couple of option descriptors.
 NIC-specific checks have been moved off the fast path and in to
 initialisation where possible.

This also moves FATSOv1/SWTSO to a new file (tx_tso.c).  The end of transmit
 and some error handling is now outside TSO, since it is common with other
 code.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-18 11:55:38 -05:00
Jon Cooper 942e298eba sfc: work around TRIGGER_INTERRUPT command not working on SFC9140
MC_CMD_TRIGGER_INTERRUPT does not work on the SFC9140, as used in the
sfn7x42q and sfn7x24f.
Check for this using the MCDI workaround mechanism.
The command is only used during self test.  If it's not supported, skip
the interrupt test.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26 21:43:52 -07:00
Bert Kenward 539de7c524 sfc: set interrupt moderation via MCDI
SFN8000-series NICs require a new method of setting interrupt moderation,
via MCDI. This is indicated by a workaround flag. This new MCDI command
takes an explicit time value rather than a number of ticks. It therefore
makes sense to also store the moderation values in terms of time, since
that is what the ethtool interface is interested in.

Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-12 20:42:20 -07:00
Bert Kenward ca889a052c sfc: retrieve second word of datapath capabilities
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-12 20:42:19 -07:00
Andrew Rybchenko 34813fe26e sfc: Implement list of VLANs added over interface
Right now it contains dummy VLAN entry with unspecified VID only.
The entry is used for the case when HW VLAN filtering is not used.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 22:26:26 -07:00
Daniel Pieczko 46e612b0fc sfc: enable cascaded multicast filters in MCFW
After creating event queue 0, check to see if the workaround is enabled,
 and enable it if necessary.  This will be called during PCI probe and
 also when coming back up after a reset.  The nic_data->workaround_26807
 will be used in the future to control the filter insertion behaviour
 based on this workaround.

Only the primary PF can enable this workaround, so tolerate an EPERM
 error and continue.  Otherwise, if any step in the checking and enabling
 of the workaround fails, the event queue must be removed.

We check that workaround is implemented before trying to enable it,
 and store the current workaround setting before trying to change it.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21 22:21:31 -07:00
Daniel Pieczko 3c36a2aded sfc: display vadaptor statistics for all interfaces
All interfaces will display vadaptor statistics, so set all the
relevant bits in the stats bitmask. Only functions with the
LINKCTRL flag will see other stats, including (per-port) MAC stats.

The vadaptor stats are from rx_unicast to tx_overflow.

Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-02 12:57:28 -07:00
Daniel Pieczko e80ca01399 sfc: add "port_" prefix to MAC stats
The MAC stats are per-port and will only be displayed on the PF
with control of the link (one per physical port). Vadapter stats
will also be displayed for this PF, so distinguish the MAC stats
by adding a prefix of "port_".

Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-02 12:57:27 -07:00
Shradha Shah 1d051e0098 sfc: Implement ndo_gets_phys_port_id() for EF10 VFs
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-02 12:57:26 -07:00
Shradha Shah 88a37de674 sfc: Store vf_index in nic_data for Ef10.
Added function efx_ef10_get_vf_index to store the vf_index
in nic_data during probe

vf_index is needed in future patches to access a particular
VF in the VF data structure.

Moved efx_ef10_probe_pf and efx_ef10_probe_vf in order to
used efx_ef10_remove

Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-21 18:43:52 -04:00
Jon Cooper 267c01571b sfc: Add use of shared RSS contexts.
Allow PFs to allocate shared RSS contexts if we exhaust our
exclusive RSS contexts. Make VFs use shared RSS contexts in
all cases.
Spruce up error handling so that the shadow copy of the RSS
table is updated after successful update, rather than in all
cases, so that we report the actual contents of the RSS table
after a failure to set it, rather than what we'd like it to be.

Populate context_size parameter when vacuously allocating RSS
context of size 1.

Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09 16:16:48 -04:00
Shradha Shah 3c5eb87605 sfc: create vports for VFs and assign random MAC addresses
The parent PF creates vports for all its child VFs and adds MAC
addresses to these.  When the VF driver loads, it can make an MCDI
call to get the MAC address that the parent PF assigned it.

The parent PF also assigns a mac address to its own vport because
implicit creation of a vAdaptor will only work on evb ports with
MAC addresses assigned.

The vport MAC address needs to be stored in the PF's nic_data
struct as it can later be changed on the vadaptor (and its net_dev
struct). When removing a vport the original MAC address must be
deleted.

A new flag is needed in the VF data structure to identify whether
a vport has been assigned to the VF.  This is to determine whether
it needs to be un-assigned before freeing the vport.  Also,
attempting to un-assign a vport which is not assigned will result
in an EALREADY error.

Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09 16:16:48 -04:00
Shradha Shah 02246a7f96 sfc: Prepare to bind the sfc driver to the VF.
Added efx_nic_type structure for VF.
Mapped a different BAR for VF as it uses BAR 0 for memory.
Added functions sriov_init and sriov_fini.

Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09 16:16:47 -04:00
Daniel Pieczko 1cd9ecbbe6 sfc: get the PF number and record in nic_data
Use MC_CMD_GET_FUNCTION_INFO to record the PF number in nic_data.
This will be needed when assigned vports to VFs.

Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09 16:16:47 -04:00
Daniel Pieczko 6d8aaaf6f7 sfc: create VEB vswitch and vport above default firmware setup
Adds functions to allocate and free vswitches and vports; vadaptors
are automatically allocated and freed when TX/RX queues are
initialised and finalised.  This vswitching structure is only created
if the firmware supports it, so a check that full-featured firmware
is running is performed first.

If the MC resets, the vswitching infrastructure will need to be
recreated, so mark the "must_probe_vswitching" flag when an MC reboot
is detected.

Don't try to create a vswitch if vf-count=0

This allocation of vswitches and vports does not currently support
configuring VLAN tags, but that can be added in a future change.

Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09 16:16:47 -04:00
Daniel Pieczko 45b2449e3f sfc: record the PF's vport ID in nic_data
The default port ID of EVB_PORT_ID_ASSIGNED is a "magic" number
for the MCFW to select the physical port of the PF.  If other
vswitches and vports are created on top of the default firmware
configuration, the ID of the newly created vport is then required
when passed to MCDI commands.  Currently, this doesn't happen so
the vport_id is never changed, but a subsequent patch will change
this behaviour so that other vswitches and vports are created.

The vport_id recorded in nic_data is only relevant for PFs.
VFs will have their vports created by their parent PF, and in
that case the parent PF will record the vport ID of each VF.
For a VF, nic_data->vport_id is expected to remain at the default
value.

Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09 16:16:47 -04:00
Daniel Pieczko 8d9f9dd448 sfc: Record [rt]x_dpcpu_fw_id in EF10 nic_data
The (future) code to add/remove vswitches and vports will be
dependent on the firmware variant.
To simplify the checking of the firmware variant, record
values for rx_dpcpu_fw_id and tx_dpcpu_fw_id in EF10 nic_data.

There was only one place where this was previously used:
efx_mcdi_print_fwver() in ethtool.c.
The MC_CMD_GET_CAPABILITIES can be replaced and the values from
nic_data used instead.

Note that the printing of "?" if the MC command fails or if the
outlength is incorrect no longer apply, because errors are returned
in efx_ef10_init_datapath_caps() in both of these cases.

Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09 16:16:47 -04:00
Daniel Pieczko bf3d0156c5 sfc: Move and rename efx_vf struct to siena_vf
The efx_vf struct contains Siena-specific fields for VFs,
so rename to siena_vf.
Also move it into the siena_nic_data struct, as EF10 will
track its VFs in its own ef10_nic_data, storing much less
information about them since VFDI is no longer used.

Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09 16:16:46 -04:00
Shradha Shah 7fa8d54704 sfc: Own header for nic-specific sriov functions, single instance of netdev_ops and sriov removed from Falcon code
By putting all the efx_{siena,ef10}_sriov_* declarations in
{siena,ef10}_sriov.h, ensure they cannot be called from nic-generic code.
Also fixes up an instance of this, where mcdi.c was calling
efx_siena_sriov_flr.

The single instance of netdev_ops should call general high level
functions that can then call something adapter specific in efx_nic_type.
We should only do adapter specialisation via efx_nic_type.

Removal of sriov functionality from the Falcon code means that tests
are needed for the presence of some callbacks.

Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09 16:16:46 -04:00
Shradha Shah d98a4ffe0d sfc: Add NIC type operations to replace direct calls from efx.c into siena_sriov.c
Also add dummy functions where required to avoid NULL pointer dereference.

Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06 14:43:09 -05:00
Shradha Shah 327c685eb7 sfc: Rename implementations in siena_sriov.c to have a 'siena' prefix
Patch in preparation for the upcoming EF10 sriov support.

Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06 14:43:08 -05:00
Shradha Shah 2dc313eca3 sfc: Move the current VF state from efx_nic into siena_nic_data
This patch series provides a base and cleanup for the
upcoming EF10 SRIOV support.

This patch moves the VF state into siena_nic_data as a basis to
save the VF state based on nic type.

Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06 14:43:08 -05:00
Edward Cree 70b33fb0dd sfc: add support for skb->xmit_more
Don't ring the doorbell, and don't do PIO.  This will also prevent
 TX Push, because there will be more than one buffer waiting when
 the doorbell is rung.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-17 23:47:32 -04:00