->fault(), ->page_mkwrite(), and ->pfn_mkwrite() calls do not need to
take a vma and vmf parameter when the vma already resides in vmf.
Remove the vma parameter to simplify things.
[arnd@arndb.de: fix ARM build]
Link: http://lkml.kernel.org/r/20170125223558.1451224-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/148521301778.19116.10840599906674778980.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Instead of receiving the num_crts as a parameter, we can read it
directly from the mode_config structure. I audited the drivers that
invoke this helper and I believe all of them initialize the mode_config
struct accordingly, prior to calling the fb_helper.
I used the following coccinelle hack to make this transformation, except
for the function headers and comment updates. The first and second
rules are split because I couldn't find a way to remove the unused
temporary variables at the same time I removed the parameter.
// <smpl>
@r@
expression A,B,D,E;
identifier C;
@@
(
- drm_fb_helper_init(A,B,C,D)
+ drm_fb_helper_init(A,B,D)
|
- drm_fbdev_cma_init_with_funcs(A,B,C,D,E)
+ drm_fbdev_cma_init_with_funcs(A,B,D,E)
|
- drm_fbdev_cma_init(A,B,C,D)
+ drm_fbdev_cma_init(A,B,D)
)
@@
expression A,B,C,D,E;
@@
(
- drm_fb_helper_init(A,B,C,D)
+ drm_fb_helper_init(A,B,D)
|
- drm_fbdev_cma_init_with_funcs(A,B,C,D,E)
+ drm_fbdev_cma_init_with_funcs(A,B,D,E)
|
- drm_fbdev_cma_init(A,B,C,D)
+ drm_fbdev_cma_init(A,B,D)
)
@@
identifier r.C;
type T;
expression V;
@@
- T C;
<...
when != C
- C = V;
...>
// </smpl>
Changes since v1:
- Rebased on top of the tip of drm-misc-next.
- Remove mention to sti since a proper fix got merged.
Suggested-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170202162640.27261-1-krisman@collabora.co.uk
No longer true since commit 07f8d9bdb2 ("drm/qxl: add support for > 1
output"). qxl_num_crtc defaults to 4 and is configurable as a module
parameter.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170127010548.27970-1-krisman@collabora.co.uk
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The additional housekeeping had too much CPU overhead,
let's use the BO priorities instead.
agd: also revert hibmc changes
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-Tested-by: Roger.He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ensure that the driver can listen to evictions even when they don't take the
path through ttm_bo_driver::move.
This is crucial for amdgpu, which relies on an eviction counter to skip
re-binding page tables when possible.
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This avoids using the deprecated drm_put_dev() and unload() hook
interfaces in the qxl driver.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170119134806.8926-2-krisman@collabora.co.uk
This avoids using the deprecated drm_get_pci_dev() and load() hook
interfaces in the qxl driver.
The only tricky part is to ensure TTM debugfs initialization happens
after the debugfs root node is created, which is done by moving that
code into the debufs_init() hook.
Tested on qemu with igt and running a WM on top of X.
Changes since v1:
- Drop verification for primary minor in qxl_debugsfs_init.
Changes since V2:
- Put new header together with other debugfs headers.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170119134806.8926-1-krisman@collabora.co.uk
Registering the connector explicitly right after creation is not
necessary for modesetting drivers, because drm_dev_register already takes
care of this on the core side, by calling drm_modeset_register_all.
In addition, performing the initialization too early will get in the way
of the load() hook removal, because the connector interface cannot be
published prior to registering the minors.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
CC: Dave Airlie <airlied@redhat.com>
CC: Daniel Vetter <daniel.vetter@ffwll.ch>
CC: dri-devel@lists.freedesktop.org
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170112161610.19924-1-krisman@collabora.co.uk
The integer returned by the unload hook is ignored by the drm core, so
let's make it void.
This patch was created using the following Coccinelle semantic script
(except for the declaration and comment in drm_drv.h):
Compile-tested only.
// <smpl>
@ get_name @
struct drm_driver drv;
identifier fn;
@@
drv.unload = fn;
@ replace_type @
identifier get_name.fn;
@@
- int
+ void
fn (...)
{
...
}
@ remove_return_param @
identifier get_name.fn;
@@
void fn (...)
{
<...
if (...)
return
- ...
;
...>
}
@ drop_final_return @
identifier get_name.fn;
@@
void fn (...)
{
...
- return 0;
}
// </smpl>
Suggested-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Acked-by: Christian König <christian.koenig@amd.com>.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170106175731.29196-1-krisman@collabora.co.uk
Including all drivers. I thought about keeping small compat functions
to avoid having to change all drivers. But I really like the
drm_printer idea, so figured spreading it more widely is a good thing.
v2: Review from Chris:
- Natural argument order and better name for drm_mm_print.
- show_mm() macro in the selftest.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1483009764-8281-1-git-send-email-daniel.vetter@ffwll.ch
<drm/drm_crtc.h> used to define most of the in-kernel KMS API. It has
now been split into separate files for each object type, but still
includes most other KMS headers to avoid breaking driver compilation.
As a step towards fixing that problem, remove the inclusion of
<drm/drm_encoder.h> from <drm/drm_crtc.h> and include it instead where
appropriate. Also remove the forward declarations of the drm_encoder and
drm_encoder_helper_funcs structures from <drm/drm_crtc.h> as they're not
needed in the header.
<drm/drm_encoder.h> now has to include <drm/drm_mode.h> and contain a
forward declaration of struct drm_encoder in order to allow including it
as the first header in a compilation unit.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sinclair Yeh <syeh@vmware.com> # For vmwgfx
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1481709550-29226-2-git-send-email-laurent.pinchart+renesas@ideasonboard.com
We want framebuffers to be mostly useable already before
drm_framebuffer_init() is called, and so we will start demanding that
all the interesting format/size/etc. information be filled in before
drm_framebuffer_init(). drm_helper_mode_fill_fb_struct() will do that
for us, so let's make sure it gets called before drm_framebuffer_init().
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-16-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Backmerge v4.9-rc8 to get at
commit e94bd1736f
Author: Michel Dänzer <michel.daenzer@amd.com>
Date: Wed Nov 30 17:30:01 2016 +0900
drm: Don't call drm_for_each_crtc with a non-KMS driver
so I can apply Michel's follow-up patch.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
In function qxl_release_alloc(), when kmalloc() returns a NULL pointer,
it returns value 0 and parameter *ret is uninitialized. 0 means no error
to the callers of qxl_release_alloc(). The callers keep going and will
try to reference the uninitialized variable. This patch fixes the bug,
returning "-ENOMEM" when kmalloc() fails.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188911
Signed-off-by: Pan Bian <bianpan2016@163.com>
[seanpaul fixed up subject prefix]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1480777902-7648-1-git-send-email-bianpan2016@163.com
They're gone since 8a357d1004 ("drm: Nerf DRM_CONTROL nodes").
Spotted while doing a full audit when revieng a similar patch from
Nicolai for radeon.
v2: Drink coffee first aka don't forget the unregister side.
Cc: Dave Airlie <airlied@redhat.com>
Fixes: 8a357d1004 ("drm: Nerf DRM_CONTROL nodes")
Cc: Nicolai Stange <nicstange@gmail.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161205072926.12546-1-daniel.vetter@ffwll.ch
drm/qxl: various bugfixes and cleanups,
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=OYiT
-----END PGP SIGNATURE-----
Merge tag 'drm-qemu-20161121' of git://git.kraxel.org/linux into drm-next
drm/virtio: fix busid in a different way, allocate more vbufs.
drm/qxl: various bugfixes and cleanups,
* tag 'drm-qemu-20161121' of git://git.kraxel.org/linux: (224 commits)
drm/virtio: allocate some extra bufs
qxl: Allow resolution which are not multiple of 8
qxl: Don't notify userspace when monitors config is unchanged
qxl: Remove qxl_bo_init() return value
qxl: Call qxl_gem_{init, fini}
qxl: Add missing '\n' to qxl_io_log() call
qxl: Remove unused prototype
qxl: Mark some internal functions as static
Revert "drm: virtio: reinstate drm_virtio_set_busid()"
drm/virtio: fix busid regression
drm: re-export drm_dev_set_unique
Linux 4.9-rc5
gp8psk: Fix DVB frontend attach
gp8psk: fix gp8psk_usb_in_op() logic
dvb-usb: move data_mutex to struct dvb_usb_device
iio: maxim_thermocouple: detect invalid storage size in read()
aoe: fix crash in page count manipulation
lightnvm: invalid offset calculation for lba_shift
Kbuild: enable -Wmaybe-uninitialized warnings by default
pcmcia: fix return value of soc_pcmcia_regulator_set
...
The use of drm_cvt_mode() in qxl_add_monitors_config_modes() means that
the resolutions we are going to present to user-space are going to be
rounded down to a multiple of 8. In the QXL arbitrary resolution case,
this is not useful.
This commit forces the actual width/height that was requested by the
client in the drm_display_mode structure rather than keeping the
rounded version.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Message-id: 20161108091209.25568-8-cfergeau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When the QXL driver receives a QXL_INTERRUPT_CLIENT_MONITORS_CONFIG interrupt,
we currently always notify userspace that there was some hotplug event.
However, gnome-shell/mutter is reacting to this event by attempting a
resolution change, which it does by issueing drmModeRmFB, drmModeAddFB,
and then drmModeSetCrtc. This has the side-effect of causing
qxl_crtc_mode_set() to tell the QXL virtual hardware that a primary
surface was destroyed and created. After going through QEMU and then the
remote SPICE client, a new identical monitors config message will be
sent, resulting in a QXL_INTERRUPT_CLIENT_MONITORS_CONFIG interrupt to
be emitted, and the same scenario occurring again.
As destroying/creating the primary surface causes a visible screen
flicker, this makes the guest hard to use (
https://bugzilla.redhat.com/show_bug.cgi?id=1266484 ).
This commit checks if the screen configuration we received is the same
one as the current one, and does not notify userspace about it if that's
the case.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
Message-id: 20161108091209.25568-7-cfergeau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
qdev->gem.objects was initialized directly in qxl_device_init() rather
than going through qxl_gem_init(), and qxl_gem_fini() was never called.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Message-id: 20161108091209.25568-5-cfergeau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The message has to be terminated by a newline as it's not going to get
added automatically.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
Message-id: 20161108091209.25568-4-cfergeau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
qxl_crtc_set_from_monitors_config() is defined in qxl_drv.h but never
implemented.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
Message-id: 20161108091209.25568-3-cfergeau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
They are not used outside of their respective source file
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
Message-id: 20161108091209.25568-2-cfergeau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Pull request already again to get the s/fence/dma_fence/ stuff in and
allow everyone to resync. Otherwise really just misc stuff all over, and a
new bridge driver.
* tag 'topic/drm-misc-2016-10-27' of git://anongit.freedesktop.org/git/drm-intel:
drm/bridge: fix platform_no_drv_owner.cocci warnings
drm/bridge: fix semicolon.cocci warnings
drm: Print some debug/error info during DP dual mode detect
drm: mark drm_of_component_match_add dummy inline
drm/bridge: add Silicon Image SiI8620 driver
dt-bindings: add Silicon Image SiI8620 bridge bindings
video: add header file for Mobile High-Definition Link (MHL) interface
drm: convert DT component matching to component_match_add_release()
dma-buf: Rename struct fence to dma_fence
dma-buf/fence: add an lockdep_assert_held()
drm/dp: Factor out helper to distinguish between branch and sink devices
drm/edid: Only print the bad edid when aborting
drm/msm: add missing header dependencies
drm/msm/adreno: move function declarations to header file
drm/i2c/tda998x: mark symbol static where possible
doc: add missing docbook parameter for fence-array
drm: RIP mode_config->rotation_property
drm/msm/mdp5: Advertize 180 degree rotation
drm/msm/mdp5: Use per-plane rotation property
This way the driver can decide if it is valuable to evict a BO or not.
The current implementation is added as default to all existing drivers.
v2: fix some typos found during internal testing
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- more core cleanup patches to prep drm_file to be used for
kernel-internal contexts (David Herrmann)
- more split-up+docs for drm_crtc.c
- lots of small fixes and polish all over
* tag 'topic/drm-misc-2016-09-25' of git://anongit.freedesktop.org/drm-intel: (37 commits)
drm: bridge: analogix/dp: mark symbols static where possible
drm/bochs: mark bochs_connector_get_modes() static
drm/bridge: analogix_dp: Improve panel on time
drm/bridge: analogix_dp: Don't read EDID if panel present
drm/bridge: analogix_dp: Remove duplicated code
Revert "drm/i2c: tda998x: don't register the connector"
drm: Fix plane type uabi breakage
dma-buf/sync_file: free fences array in num_fences is 1
drm/i2c: tda998x: don't register the connector
drm: Don't swallow error codes in drm_dev_alloc()
drm: Distinguish no name from ENOMEM in set_unique()
drm: Remove dirty property from docs
drm/doc: Document color space handling
drm: Extract drm_color_mgmt.[hc]
drm/doc: Polish plane composition property docs
drm: Conslidate blending properties in drm_blend.[hc]
drm/doc: Polish for drm_plane.[hc]
drm: Extract drm_plane.[hc]
drm/tilcdc: Add atomic and crtc headers to crtc.c
drm: Fix typo in encoder docs
...
The qxl driver currently destroys and recreates the
qxl "primary" any time the first crtc is set.
A side-effect of destroying the primary is mouse state
associated with the crtc is lost, which leads to
disappearing mouse cursors on wayland sessions.
This commit changes the driver to reapply the cursor
any time SetCrtc is called. It achieves this by keeping
a reference to the cursor bo on the qxl_crtc struct.
Signed-off-by: Ray Strode <rstrode@redhat.com>
Message-id: 1473433745-11016-1-git-send-email-halfline@gmail.comhttps://bugzilla.redhat.com/show_bug.cgi?id=1200901
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
More radeon and amdgpu changes for 4.9. Highlights:
- Initial SI support for amdgpu (controlled by a Kconfig option)
- misc ttm cleanups
- runtimepm fixes
- S3/S4 fixes
- power improvements
- lots of code cleanups and optimizations
* 'drm-next-4.9' of git://people.freedesktop.org/~agd5f/linux: (151 commits)
drm/ttm: remove cpu_address member from ttm_tt
drm/radeon/radeon_device: remove unused function
drm/amdgpu: clean function declarations in amdgpu_ttm.c up
drm/amdgpu: use the new ring ib and dma frame size callbacks (v2)
drm/amdgpu/vce3: add ring callbacks for ib and dma frame size
drm/amdgpu/vce2: add ring callbacks for ib and dma frame size
drm/amdgpu/vce: add common ring callbacks for ib and dma frame size
drm/amdgpu/uvd6: add ring callbacks for ib and dma frame size
drm/amdgpu/uvd5: add ring callbacks for ib and dma frame size
drm/amdgpu/uvd4.2: add ring callbacks for ib and dma frame size
drm/amdgpu/sdma3: add ring callbacks for ib and dma frame size
drm/amdgpu/sdma2.4: add ring callbacks for ib and dma frame size
drm/amdgpu/cik_sdma: add ring callbacks for ib and dma frame size
drm/amdgpu/si_dma: add ring callbacks for ib and dma frame size
drm/amdgpu/gfx8: add ring callbacks for ib and dma frame size
drm/amdgpu/gfx7: add ring callbacks for ib and dma frame size
drm/amdgpu/gfx6: add ring callbacks for ib and dma frame size
drm/amdgpu/ring: add an interface to get dma frame and ib size
drm/amdgpu/sdma3: drop unused functions
drm/amdgpu/gfx6: drop gds_switch callback
...
Rather than using "struct file*", use "struct drm_file*" as tag VM tag for
BOs. This will pave the way for "struct drm_file*" without any "struct
file*" back-pointer.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20160901124837.680-3-dh.herrmann@gmail.com
Instead of keeping a bunch of potentially unused flags, just define
the start for private memory types and remove the rest.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For reasons that entirely elude me fb.h exposes all the structures,
even when it is not enabled. Except for special stuff like fb_defio.
Which means all the drivers which haven't yet switched over to the
defio support in the helpers and still roll their own, will fail
to compile when fbdev emulation is disabled. Protect just those
bits, as a gnarly reminder that conversion to the core defio helpers
would be good.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1470847958-28465-6-git-send-email-daniel.vetter@ffwll.ch
Signed-off-by: Dave Airlie <airlied@redhat.com>
First drm-next pull for radeon and amdgpu for 4.9. Highlights:
- powerplay support for iceland asics
- improved GPU reset (both full asic and per block)
- UVD and VCE powergating for CZ and ST
- VCE clockgating for CZ and ST
- Support for pre-initialized (e.g., zeroed) vram buffers
- ttm cleanups
- virtual display support
- core and radeon/amdgpu support for page_flip_target
- lots of bug fixes and clean ups
* 'drm-next-4.9' of git://people.freedesktop.org/~agd5f/linux: (171 commits)
drm/amdgpu: use memcpy_toio for VCE firmware upload
drm/amdgpu: use memcpy_to/fromio for UVD fw upload
drm/amd/powerplay: delete useless code in iceland_hwmgr.c.
drm/radeon: switch UVD code to use UVD_NO_OP for padding
drm/amdgpu: switch UVD code to use UVD_NO_OP for padding
drm/radeon: add support for UVD_NO_OP register
drm/amdgpu: add support for UVD_NO_OP register
drm/amdgpu: fix VCE ib alignment value
drm/amdgpu: fix IB alignment for UVD
drm/amd/amdgpu: Print ring name in amdgpu_ib_schedule()
drm/radeon: remove dead code, si_mc_load_microcode (v2)
drm/radeon/cik: remove dead code (v2)
drm/amd/powerplay: avoid NULL dereference, cz_hwmgr.c
drm/amd/powerplay: avoid NULL pointer dereference
drm/amdgpu/gmc8: remove dead code (v2)
drm/amdgpu/gmc7: remove dead code (v2)
drm/amdgpu: Fix indentation in dce_v8_0_audio_write_sad_regs()
drm/amdgpu: Use correct mask in dce_v8_0_afmt_setmode() and fix comment typos.
drm/amdgpu: cleanup amdgpu_vm_bo_update params
drm/amdgpu: stop adding dummy entry in amdgpu_ttm_placement_init
...
For reasons that entirely elude me fb.h exposes all the structures,
even when it is not enabled. Except for special stuff like fb_defio.
Which means all the drivers which haven't yet switched over to the
defio support in the helpers and still roll their own, will fail
to compile when fbdev emulation is disabled. Protect just those
bits, as a gnarly reminder that conversion to the core defio helpers
would be good.
Cc: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1470847958-28465-6-git-send-email-daniel.vetter@ffwll.ch
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The drm_gem_object_unreference_unlocked() function tests whether
its argument is NULL and then returns immediately.
Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/913198fa-2aa4-4804-8616-dd495428c0a5@users.sourceforge.net
Backmerge drm-next to be able to apply Chris' connector_unregister_all
cleanup (need latest i915 and sun4i state for that).
Also there's a trivial conflict in ttm_bo.c that git rerere fails to
remember.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
I recovered dri-devel backlog from my vacation, more misc stuff:
- of_put_node fixes from Peter Chen (not all yet)
- more patches from Gustavo to use kms-native drm_crtc_vblank_* funcs
- docs sphinxification from Lukas Wunner
- bunch of fixes all over from Dan Carpenter
- more follow up work from Chris register/unregister rework in various
places
- vgem dma-buf export (for writing testcases)
- small things all over from tons of different people
* tag 'topic/drm-misc-2016-07-14' of git://anongit.freedesktop.org/drm-intel: (52 commits)
drm: Don't overwrite user ioctl arg unless requested
dma-buf/sync_file: improve Kconfig description for Sync Files
MAINTAINERS: add entry for the Sync File Framework
drm: Resurrect atomic rmfb code
drm/vgem: Use PAGE_KERNEL in place of x86-specific PAGE_KERNEL_IO
qxl: silence uninitialized variable warning
qxl: check for kmap failures
vga_switcheroo: Sphinxify docs
drm: Restore double clflush on the last partial cacheline
gpu: drm: rockchip_drm_drv: add missing of_node_put after calling of_parse_phandle
gpu: drm: sti_vtg: add missing of_node_put after calling of_parse_phandle
gpu: drm: sti_hqvdp: add missing of_node_put after calling of_parse_phandle
gpu: drm: sti_vdo: add missing of_node_put after calling of_parse_phandle
gpu: drm: sti_compositor: add missing of_node_put after calling of_parse_phandle
drm/tilcdc: use drm_crtc_handle_vblank()
drm/rcar-du: use drm_crtc_handle_vblank()
drm/nouveau: use drm_crtc_handle_vblank()
drm/atmel: use drm_crtc_handle_vblank()
drm/armada: use drm_crtc_handle_vblank()
drm: make drm_vblank_count_and_time() static
...
Dave Jiang