And thus another call to kvm_vcpu_map() can die.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20211115165030.7422-7-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Kill another mostly gratuitous kvm_vcpu_map() which could just use the
userspace HVA for it.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20211115165030.7422-6-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20211115165030.7422-4-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using kvm_vcpu_map() for reading from the guest is entirely gratuitous,
when all we do is a single memcpy and unmap it again. Fix it up to use
kvm_read_guest()... but in fact I couldn't bring myself to do that
without also making it use a gfn_to_hva_cache for both that *and* the
copy in the other direction.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20211115165030.7422-5-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In commit 319afe6856 ("KVM: xen: do not use struct gfn_to_hva_cache") we
stopped storing this in-kernel as a GPA, and started storing it as a GFN.
Which means we probably should have stopped calling gpa_to_gfn() on it
when userspace asks for it back.
Cc: stable@vger.kernel.org
Fixes: 319afe6856 ("KVM: xen: do not use struct gfn_to_hva_cache")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20211115165030.7422-2-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Incorporate EFER.LMA into kvm_mmu_extended_role, as it used to compute the
guest root level and is not reflected in kvm_mmu_page_role.level when TDP
is in use. When simply running the guest, it is impossible for EFER.LMA
and kvm_mmu.root_level to get out of sync, as the guest cannot transition
from PAE paging to 64-bit paging without toggling CR0.PG, i.e. without
first bouncing through a different MMU context. And stuffing guest state
via KVM_SET_SREGS{,2} also ensures a full MMU context reset.
However, if KVM_SET_SREGS{,2} is followed by KVM_SET_NESTED_STATE, e.g. to
set guest state when migrating the VM while L2 is active, the vCPU state
will reflect L2, not L1. If L1 is using TDP for L2, then root_mmu will
have been configured using L2's state, despite not being used for L2. If
L2.EFER.LMA != L1.EFER.LMA, and L2 is using PAE paging, then root_mmu will
be configured for guest PAE paging, but will match the mmu_role for 64-bit
paging and cause KVM to not reconfigure root_mmu on the next nested VM-Exit.
Alternatively, the root_mmu's role could be invalidated after a successful
KVM_SET_NESTED_STATE that yields vcpu->arch.mmu != vcpu->arch.root_mmu,
i.e. that switches the active mmu to guest_mmu, but doing so is unnecessarily
tricky, and not even needed if L1 and L2 do have the same role (e.g., they
are both 64-bit guests and run with the same CR4).
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20211115131837.195527-3-mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When loading nested state, don't use check vcpu->arch.efer to get the
L1 host's 64-bit vs. 32-bit state and don't check it for consistency
with respect to VM_EXIT_HOST_ADDR_SPACE_SIZE, as register state in vCPU
may be stale when KVM_SET_NESTED_STATE is called---and architecturally
does not exist. When restoring L2 state in KVM, the CPU is placed in
non-root where nested VMX code has no snapshot of L1 host state: VMX
(conditionally) loads host state fields loaded on VM-exit, but they need
not correspond to the state before entry. A simple case occurs in KVM
itself, where the host RIP field points to vmx_vmexit rather than the
instruction following vmlaunch/vmresume.
However, for the particular case of L1 being in 32- or 64-bit mode
on entry, the exit controls can be treated instead as the source of
truth regarding the state of L1 on entry, and can be used to check
that vmcs12.VM_EXIT_HOST_ADDR_SPACE_SIZE matches vmcs12.HOST_EFER if
vmcs12.VM_EXIT_LOAD_IA32_EFER is set. The consistency check on CPU
EFER vs. vmcs12.VM_EXIT_HOST_ADDR_SPACE_SIZE, instead, happens only
on VM-Enter. That's because, again, there's conceptually no "current"
L1 EFER to check on KVM_SET_NESTED_STATE.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20211115131837.195527-2-mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In 64-bit mode, x86 instruction encoding allows us to use the low 8 bits
of any GPR as an 8-bit operand. In 32-bit mode, however, we can only use
the [abcd] registers. For which, GCC has the "q" constraint instead of
the less restrictive "r".
Also fix st->preempted, which is an input/output operand rather than an
input.
Fixes: 7e2175ebd6 ("KVM: x86: Fix recording of guest steal time / preempted status")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <89bf72db1b859990355f9c40713a34e0d2d86c98.camel@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The lack a static declaration currently results in:
arch/x86/kvm/cpuid.c:128:26: warning: no previous prototype for function 'kvm_find_kvm_cpuid_features'
when compiling with "W=1".
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 760849b147 ("KVM: x86: Make sure KVM_CPUID_FEATURES really are KVM_CPUID_FEATURES")
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Message-Id: <20211115144131.5943-1-pdurrant@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since ata_ncq_sdev_attrs is a local struct, declare it static. This
avoids a sparse warning at compile time.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
The StorageD3Enable _DSD is used for the vendor to indicate that the disk
should be opted into or out of a different behavior based upon the platform
design.
For AMD's Renoir and Green Sardine platforms it's important that any
attached SATA storage has transitioned into DevSlp when s2idle is used.
If the disk is left in active/partial/slumber, then the system is not able
to resume properly.
When the StorageD3Enable _DSD is detected, check the system is using s2idle
and DevSlp is enabled and if so explicitly wait long enough for the disk to
enter DevSlp.
Cc: Nehal-bakulchandra Shah <Nehal-bakulchandra.Shah@amd.com>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214091
Link: https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/power-management-for-storage-hardware-devices-intro
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
AMD requires that the SATA controller be configured for devsleep in order
for S0i3 entry to work properly.
commit b1a9585cc3 ("ata: ahci: Enable DEVSLP by default on x86 with
SLP_S0") sets up a kernel policy to enable devsleep on Intel mobile
platforms that are using s0ix. Add the PCI ID for the SATA controller in
Green Sardine platforms to extend this policy by default for AMD based
systems using s0i3 as well.
Cc: Nehal-bakulchandra Shah <Nehal-bakulchandra.Shah@amd.com>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214091
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
ata_dev_config_ncq_prio() and ata_dev_config_devslp() both access pages
of the IDENTIFY DEVICE data log. Before calling ata_read_log_page(),
make sure to check for the existence of the IDENTIFY DEVICE data log and
of the log page accessed using ata_identify_page_supported(). This
avoids useless error messages from ata_read_log_page() and failures with
some LLDD scsi drivers using libsas.
Reported-by: Nikolay <knv418@gmail.com>
Cc: stable@kernel.org # 5.15
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Matthew Perkowski <mgperkow@gmail.com>
The user supplies the "count" value to say how big its read buffer is.
The rvu_dbg_lmtst_map_table_display() function does not take the "count"
into account but instead just copies the whole table, potentially
corrupting the user's data.
Introduce the "ret" variable to store how many bytes we can copy. Also
I changed the type of "off" to size_t to make using min() simpler.
Fixes: 0daa55d033 ("octeontx2-af: cn10k: debugfs for dumping LMTST map table")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211117073454.GD5237@kili
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are two sites that calls queue_work() after the
destroy_workqueue() and lead to possible UAF.
The first site is nci_send_cmd(), which can happen after the
nci_close_device as below
nfcmrvl_nci_unregister_dev | nfc_genl_dev_up
nci_close_device |
flush_workqueue |
del_timer_sync |
nci_unregister_device | nfc_get_device
destroy_workqueue | nfc_dev_up
nfc_unregister_device | nci_dev_up
device_del | nci_open_device
| __nci_request
| nci_send_cmd
| queue_work !!!
Another site is nci_cmd_timer, awaked by the nci_cmd_work from the
nci_send_cmd.
... | ...
nci_unregister_device | queue_work
destroy_workqueue |
nfc_unregister_device | ...
device_del | nci_cmd_work
| mod_timer
| ...
| nci_cmd_timer
| queue_work !!!
For the above two UAF, the root cause is that the nfc_dev_up can race
between the nci_unregister_device routine. Therefore, this patch
introduce NCI_UNREG flag to easily eliminate the possible race. In
addition, the mutex_lock in nci_close_device can act as a barrier.
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Fixes: 6a2968aaf5 ("NFC: basic NCI protocol implementation")
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211116152732.19238-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a potential UAF between the unregistration routine and the NFC
netlink operations.
The race that cause that UAF can be shown as below:
(FREE) | (USE)
nfcmrvl_nci_unregister_dev | nfc_genl_dev_up
nci_close_device |
nci_unregister_device | nfc_get_device
nfc_unregister_device | nfc_dev_up
rfkill_destory |
device_del | rfkill_blocked
... | ...
The root cause for this race is concluded below:
1. The rfkill_blocked (USE) in nfc_dev_up is supposed to be placed after
the device_is_registered check.
2. Since the netlink operations are possible just after the device_add
in nfc_register_device, the nfc_dev_up() can happen anywhere during the
rfkill creation process, which leads to data race.
This patch reorder these actions to permit
1. Once device_del is finished, the nfc_dev_up cannot dereference the
rfkill object.
2. The rfkill_register need to be placed after the device_add of nfc_dev
because the parent device need to be created first. So this patch keeps
the order but inject device_lock to prevent the data race.
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Fixes: be055b2f89 ("NFC: RFKILL support")
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211116152652.19217-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a possible data race as shown below:
thread-A in nci_request() | thread-B in nci_close_device()
| mutex_lock(&ndev->req_lock);
test_bit(NCI_UP, &ndev->flags); |
... | test_and_clear_bit(NCI_UP, &ndev->flags)
mutex_lock(&ndev->req_lock); |
|
This race will allow __nci_request() to be awaked while the device is
getting removed.
Similar to commit e2cb6b891a ("bluetooth: eliminate the potential race
condition when removing the HCI controller"). this patch alters the
function sequence in nci_request() to prevent the data races between the
nci_close_device().
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Fixes: 6a2968aaf5 ("NFC: basic NCI protocol implementation")
Link: https://lore.kernel.org/r/20211115145600.8320-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In function amdgpu_get_xgmi_hive, when kobject_init_and_add failed
There is a potential memleak if not call kobject_put.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In SRIOV configuration, the reset may failed to bring asic back to normal but stop cpsch
already been called, the start_cpsch will not be called since there is no resume in this
case. When reset been triggered again, driver should avoid to do uninitialization again.
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add support that allow the userspace tool like RGP to get the GFX clock
value at runtime, the fix follow the old way to show the min/current/max
clocks level for compatible consideration.
=== Test ===
$ cat /sys/class/drm/card0/device/pp_dpm_sclk
0: 200Mhz *
1: 1100Mhz
2: 1600Mhz
then run stress test on one APU system.
$ cat /sys/class/drm/card0/device/pp_dpm_sclk
0: 200Mhz
1: 1040Mhz *
2: 1600Mhz
The current GFXCLK value is updated at runtime.
BugLink: https://gitlab.freedesktop.org/mesa/mesa/-/issues/5260
Reviewed-by: Huang Ray <Ray.Huang@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
amdgpu_connector_vga_get_modes missed function amdgpu_get_native_mode
which assign amdgpu_encoder->native_mode with *preferred_mode result in
amdgpu_encoder->native_mode.clock always be 0. That will cause
amdgpu_connector_set_property returned early on:
if ((rmx_type != DRM_MODE_SCALE_NONE) &&
(amdgpu_encoder->native_mode.clock == 0))
when we try to set scaling mode Full/Full aspect/Center.
Add the missing function to amdgpu_connector_vga_get_mode can fix this.
It also works on dvi connectors because
amdgpu_connector_dvi_helper_funcs.get_mode use the same method.
Signed-off-by: hongao <hongao@uniontech.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
After commit ("drm/amdgpu/display: add support for multiple backlights")
number of eDPs is defined while registering backlight device.
However the panel's extended caps get updated once before register call.
That leads to regression with extended caps like oled brightness control.
[How]
Update connector ext caps after register_backlight_device
Fixes: 7fd13baeb7 ("drm/amdgpu/display: add support for multiple backlights")
Link: https://www.reddit.com/r/AMDLaptops/comments/qst0fm/after_updating_to_linux_515_my_brightness/
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Samuel Čavoj <samuel@cavoj.net>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jasdeep Dhillon <Jasdeep.Dhillon@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Fix misleading display error in dmesg if tc filter return fail.
Only i40e status error code should be converted to string, not linux
error code. Otherwise, we return false information about the error.
Fixes: 2f4b411a3d ("i40e: Enable cloud filters via tc-flower")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reject TCs creation with proper message if the first queue
assignment is not equal to the power of two.
The first queue number was checked too late in the second queue
iteration, if second queue was configured at all. Now if first queue value
is not a power of two, then trying to create qdisc will be rejected.
Fixes: 8f88b3034d ("i40e: Add infrastructure for queue channel support")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Restore part of reset functionality used when reset is called
from the VF to reset itself. Without this fix warning message
is displayed when VF is being removed via sysfs.
Fix the crash of the VF during reset by ensuring
that the PF receives the reset message successfully.
Refactor code to use one function instead of two.
Fixes: 5c3c48ac6b ("i40e: implement virtual device interface")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Karen Sornek <karen.sornek@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
* The current iomap_file_buffered_write behavior of failing the entire
write when part of the user buffer cannot be faulted in leads to an
endless loop in gfs2. Work around that in gfs2 for now.
* Various other bugs all over the place.
-----BEGIN PGP SIGNATURE-----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=/Vqx
-----END PGP SIGNATURE-----
Merge tag 'gfs2-v5.16-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fixes from Andreas Gruenbacher:
- The current iomap_file_buffered_write behavior of failing the entire
write when part of the user buffer cannot be faulted in leads to an
endless loop in gfs2. Work around that in gfs2 for now.
- Various other bugs all over the place.
* tag 'gfs2-v5.16-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Prevent endless loops in gfs2_file_buffered_write
gfs2: Fix "Introduce flag for glock holder auto-demotion"
gfs2: Fix length of holes reported at end-of-file
gfs2: release iopen glock early in evict
gfs2: Fix atomic bug in gfs2_instantiate
gfs2: Only dereference i->iov when iter_is_iovec(i)
Print Navi1x fine grained clocks in a consistent manner with other SOCs.
Don't show aritificial DPM level when the current clock equals min or max.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Driver initialization is driven by IP version from IP
discovery table. So add error print when failing to add
ip block during driver initialization, this will be more
friendly to user to know which IP version is not correct.
[ 40.467361] [drm] host supports REQ_INIT_DATA handshake
[ 40.474076] [drm] add ip block number 0 <nv_common>
[ 40.474090] [drm] add ip block number 1 <gmc_v10_0>
[ 40.474101] [drm] add ip block number 2 <psp>
[ 40.474103] [drm] add ip block number 3 <navi10_ih>
[ 40.474114] [drm] add ip block number 4 <smu>
[ 40.474119] [drm] add ip block number 5 <amdgpu_vkms>
[ 40.474134] [drm] add ip block number 6 <gfx_v10_0>
[ 40.474143] [drm] add ip block number 7 <sdma_v5_2>
[ 40.474147] amdgpu 0000:00:08.0: amdgpu: Fatal error during GPU init
[ 40.474545] amdgpu 0000:00:08.0: amdgpu: amdgpu: finishing device.
v2: use dev_err to multi-GPU system
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Also print the message index and parameter of the stuck command.
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hooray! We've managed to hit enough bugs upstream that I've been able to
come up with a pretty solid explanation for how backlight controls are
actually supposed to be detected and used these days. As well, having the
rest of the PWM bits in VESA's backlight interface implemented seems to
have fixed all of the problematic brightness controls laptop panels that
we've hit so far.
So, let's actually document this instead of just calling the laptop panels
liars. As well, I would like to formally apologize to all of the laptop
panels I called liars. I'm sorry laptop panels, hopefully you can all
forgive me and we can move past this~
Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211105183342.130810-6-lyude@redhat.com
Now that we've added support to i915 for controlling panel backlights that
need PWM to be enabled/disabled, let's finalize this and add support for
controlling brightness levels via PWM as well. This should hopefully put us
towards the path of supporting _ALL_ backlights via VESA's DPCD interface
which would allow us to finally start trusting the DPCD again.
Note however that we still don't enable using this by default on i915 when
it's not needed, primarily because I haven't yet had a chance to confirm if
it's safe to do this on the one machine in Intel's CI that had an issue
with this: samus-fi-bdw. I have done basic testing of this on other
machines though, by manually patching i915 to force it into PWM-only mode
on some of my laptops.
v2:
* Correct documentation (thanks Doug!)
* Get rid of backlight caps
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Cc: Rajeev Nandan <rajeevny@codeaurora.org>
Cc: Satadru Pramanik <satadru@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211105183342.130810-5-lyude@redhat.com
As it turns out, apparently some machines will actually leave additional
backlight functionality like dynamic backlight control on before the OS
loads. Currently we don't take care to disable unsupported features when
writing back the backlight mode, which can lead to some rather strange
looking behavior when adjusting the backlight.
So, let's fix this by just not reading back the current backlight mode on
initial enable. I don't think there should really be any downsides to this,
and this will ensure we don't leave any unsupported functionality enabled.
This should fix at least one (but not all) of the issues seen with DPCD
backlight support on fi-bdw-samus
v5:
* Just avoid reading back DPCD register - Doug Anderson
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 867cf9cd73 ("drm/dp: Extract i915's eDP backlight code into DRM helpers")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211105183342.130810-4-lyude@redhat.com
Since we don't support hybrid AUX/PWM backlights in nouveau right now,
let's add some explicit checks so that we don't break nouveau once we
enable support for these backlights in other drivers.
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211105183342.130810-3-lyude@redhat.com
This simply adds proper support for panel backlights that can be controlled
via VESA's backlight control protocol, but which also require that we
enable and disable the backlight via PWM instead of via the DPCD interface.
We also enable this by default, in order to fix some people's backlights
that were broken by not having this enabled.
For reference, backlights that require this and use VESA's backlight
interface tend to be laptops with hybrid GPUs, but this very well may
change in the future.
v4:
* Make sure that we call intel_backlight_level_to_pwm() in
intel_dp_aux_vesa_enable_backlight() - vsyrjala
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/3680
Fixes: fe7d52bcca ("drm/i915/dp: Don't use DPCD backlights that need PWM enable/disable")
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.12+
Link: https://patchwork.freedesktop.org/patch/msgid/20211105183342.130810-2-lyude@redhat.com
The edp_panel_entry members 'delay' and 'name' are documented, but
without the correct syntax for kernel doc.
This generates the following warnings:
drivers/gpu/drm/panel/panel-edp.c:204: warning: Function parameter or member 'delay' not described in 'edp_panel_entry'
drivers/gpu/drm/panel/panel-edp.c:204: warning: Function parameter or member 'name' not described in 'edp_panel_entry'
Fix them accordingly.
Fixes: 5540cf8f3e ("drm/panel-edp: Implement generic "edp-panel"s probed by EDID")
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211117163239.529781-1-kieran.bingham+renesas@ideasonboard.com
Through log and waveform, we can see that there will be additional
suspend/resume when booting. This timing does not meet the ps8640 spec.
It seems that the delay of 500ms does not satisfied drm_panel_get_modes.
I increased it to 900ms and it seems that this problem can be solved.
To be safe, I'd just round up to a full 1000.
Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211112084302.2447931-1-yangcong5@huaqin.corp-partner.google.com
-----BEGIN PGP SIGNATURE-----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=beJ8
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.16-1' of git://linux-nfs.org/~bfields/linux
Pull nfsd bugfix from Bruce Fields:
"This is just one bugfix for a buffer overflow in knfsd's xdr decoding"
* tag 'nfsd-5.16-1' of git://linux-nfs.org/~bfields/linux:
NFSD: Fix exposure in nfsd4_decode_bitmap()
Revert commit c10383e8dd ("ACPI: scan: Release PM resources blocked
by unused objects"), because it causes boot issues to appear on some
platforms.
Reported-by: Kyle D. Pelton <kyle.d.pelton@intel.com>
Reported-by: Saranya Gopal <saranya.gopal@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Properly reconfigure VF VSIs after VF request ADQ.
Created new function to update queue mapping and queue pairs per TC
with AQ update VSI. This sets proper RSS size on NIC.
VFs num_queue_pairs should not be changed during setup of queue maps.
Previously, VF main VSI in ADQ had configured too many queues and had
wrong RSS size, which lead to packets not being consumed and drops in
connectivity.
Fixes: bc6d33c8d9 ("i40e: Fix the number of queues available to be mapped for use")
Co-developed-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Eryk Rybak <eryk.roch.rybak@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently, the i40e_vsi_setup_queue_map is basing the count of queues in
TCs on a VSI's alloc_queue_pairs member which is not changed throughout
any user's action (for example via ethtool's set_channels callback).
This implies that vsi->tc_config.tc_info[n].qcount value that is given
to the kernel via netdev_set_tc_queue() that notifies about the count of
queues per particular traffic class is constant even if user has changed
the total count of queues.
This in turn caused the kernel warning after setting the queue count to
the lower value than the initial one:
$ ethtool -l ens801f0
Channel parameters for ens801f0:
Pre-set maximums:
RX: 0
TX: 0
Other: 1
Combined: 64
Current hardware settings:
RX: 0
TX: 0
Other: 1
Combined: 64
$ ethtool -L ens801f0 combined 40
[dmesg]
Number of in use tx queues changed invalidating tc mappings. Priority
traffic classification disabled!
Reason was that vsi->alloc_queue_pairs stayed at 64 value which was used
to set the qcount on TC0 (by default only TC0 exists so all of the
existing queues are assigned to TC0). we update the offset/qcount via
netdev_set_tc_queue() back to the old value but then the
netif_set_real_num_tx_queues() is using the vsi->num_queue_pairs as a
value which got set to 40.
Fix it by using vsi->req_queue_pairs as a queue count that will be
distributed across TCs. Do it only for non-zero values, which implies
that user actually requested the new count of queues.
For VSIs other than main, stay with the vsi->alloc_queue_pairs as we
only allow manipulating the queue count on main VSI.
Fixes: bc6d33c8d9 ("i40e: Fix the number of queues available to be mapped for use")
Co-developed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Co-developed-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Eryk Rybak <eryk.roch.rybak@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Remove the reason of null pointer dereference in sync VSI filters.
Added new I40E_VSI_RELEASING flag to signalize deleting and releasing
of VSI resources to sync this thread with sync filters subtask.
Without this patch it is possible to start update the VSI filter list
after VSI is removed, that's causing a kernel oops.
Fixes: 41c445ff0f ("i40e: main driver core")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com>
Reviewed-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Reviewed-by: Witold Fijalkowski <witoldx.fijalkowski@intel.com>
Reviewed-by: Jaroslaw Gawin <jaroslawx.gawin@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Setting VLAN port increasing RX queue max_pkt_size
by 4 bytes to take VLAN tag into account.
Trigger the VF reset when setting port VLAN for
VF to renegotiate its capabilities and reinitialize.
Fixes: ba4e003d29 ("i40e: don't hold spinlock while resetting VF")
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Eryk Rybak <eryk.roch.rybak@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Change the values of EVENT_* constants from bit masks to bit numbers as
accepted by {clear,set,test}_bit() functions.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
virtio_net_hdr_to_skb does not set the skb's gso_size and gso_type
correctly for UFO packets received via virtio-net that are a little over
the GSO size. This can lead to problems elsewhere in the networking
stack, e.g. ovs_vport_send dropping over-sized packets if gso_size is
not set.
This is due to the comparison
if (skb->len - p_off > gso_size)
not properly accounting for the transport layer header.
p_off includes the size of the transport layer header (thlen), so
skb->len - p_off is the size of the TCP/UDP payload.
gso_size is read from the virtio-net header. For UFO, fragmentation
happens at the IP level so does not need to include the UDP header.
Hence the calculation could be comparing a TCP/UDP payload length with
an IP payload length, causing legitimate virtio-net packets to have
lack gso_type/gso_size information.
Example: a UDP packet with payload size 1473 has IP payload size 1481.
If the guest used UFO, it is not fragmented and the virtio-net header's
flags indicate that it is a GSO frame (VIRTIO_NET_HDR_GSO_UDP), with
gso_size = 1480 for an MTU of 1500. skb->len will be 1515 and p_off
will be 42, so skb->len - p_off = 1473. Hence the comparison fails, and
shinfo->gso_size and gso_type are not set as they should be.
Instead, add the UDP header length before comparing to gso_size when
using UFO. In this way, it is the size of the IP payload that is
compared to gso_size.
Fixes: 6dd912f826 ("net: check untrusted gso_size at kernel entry")
Signed-off-by: Jonathan Davies <jonathan.davies@nutanix.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Woodhouse