POSIX says that exit takes an unsigned integer between 0 and 255, so
using -1 doesn't work on POSIX shells.
There is already a well-defined failure code, $FAIL (1), so use that.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
If the stack tracer (CONFIG_STACK_TRACER) is disabled, the
fgraph-filter-stack test blows chunks:
[8] ftrace - function graph filters with stack tracer [FAIL]
+ reset_tracer
+ echo nop
./ftracetest: 19: /home/michael/selftests/ftrace/test.d/ftrace/fgraph-filter-stack.tc:
cannot create /proc/sys/kernel/stack_tracer_enabled: Directory nonexistent
Fix it by checking if the proc file exists before echoing to it. With
the patch applied it fails correctly with:
[8] ftrace - function graph filters with stack tracer [UNSUPPORTED]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
rtctest.c checks to see if PIE is functioning by testing if 20 interrupts occur
at rates from 2HZ to 64HZ. While this check is good, it does not check to
see if the correct amount of time has actually passed. This misses
situations where the RTC may be operating at a higher or lower frequency
than expected.
This patch introduces a simple check to verify if the time passed is
less than 10% of what was programmed into the RTC.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Cc: corbet@lwn.net
Cc: rtc-linux@googlegroups.com
Cc: linux-doc@vger.kernel.org
Cc: a.zummo@towertech.it
Cc: prarit@redhat.com
Cc: john.stultz@linaro.org
Cc: shuahkh@osg.samsung.com
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This patch splits rtc.txt into two separate files, one for the
documentation itself, and the other for the rtctest.c file. The rtctest
file is moved into the kernel tools/testing/selftests/timers directory.
This will make automated testing easier. Note that the only difference in
the rtc.txt file is that the location of the rtctest.c file has changed.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Acked-by: John Stultz <john.stultz@linaro.org>
Cc: corbet@lwn.net
Cc: rtc-linux@googlegroups.com
Cc: linux-doc@vger.kernel.org
Cc: a.zummo@towertech.it
Cc: prarit@redhat.com
Cc: john.stultz@linaro.org
Cc: shuahkh@osg.samsung.com
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
gen_kselftest_tar.sh tool generates kselftest tar archive. This tool
supports uncompressed tar, gz, bz, and xz compression formats and the
default compression format is gzip. This tool runs kselftest install
tool as its back-end.
Usage:
cd tools/testing/selftests
./gen_kselftest_tar [ tar | targz | tarbz2 | tarxz ]
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
kselftest_install.sh tool installs selftests in default location
which is tools/testing/selftests/kselftest or an user specified
location. This tool invokes back-end selftests install target with
the install location.
Usage:
cd tools/testing/selftests
./kselftest_install.sh [ install_dir ]
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This avoids repeating the logic in every Makefile. We mimic the
top-level Makefile and use $(CROSS_COMPILE)gcc.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
The bulk of the selftests are actually below the powerpc sub directory.
This adds support for installing them, when on a powerpc machine, or if
ARCH and CROSS_COMPILE are set appropriately.
This is a little more complicated because of the sub directory structure
under powerpc, but much of the common logic in lib.mk is still used. The
net effect of the patch is still a reduction in code.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Change the timers Makefile to make use of shared run and install logic
in lib.mk. Destructive tests are installed but not run by default.
Add a new variable, TEST_PROGS_EXTENDED, which is a list of extra
programs to install, but which are not run by the default run_tests
logic.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
In order to keep the kselftest Makefiles simpler, set the threadtest
default values to the ones used in standard run_tests
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This adds make install support to selftests. The basic usage is:
$ cd tools/testing/selftests
$ make install
That installs into tools/testing/selftests/install, which can then be
copied where ever necessary.
The install destination is also configurable using eg:
$ INSTALL_PATH=/mnt/selftests make install
The implementation uses two targets in the child makefiles. The first
"install" is expected to install all files into $(INSTALL_PATH).
The second, "emit_tests", is expected to emit the test instructions (ie.
bash script) on stdout. Separating this from install means the child
makefiles need no knowledge of the location of the test script.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This adds a Make include file which most selftests can then include to
get the run_tests logic.
On its own this has the advantage of some reduction in repetition, and
also means the pass/fail message is defined in fewer places.
However the key advantage is it will allow us to implement install very
simply in a subsequent patch.
The default implementation just executes each program in $(TEST_PROGS).
We use a variable to hold the default implementation of $(RUN_TESTS)
because that gives us a clean way to override it if necessary, ie. using
override. The mount, memory-hotplug and mqueue tests use that to provide
a different implementation.
Tests are not run via /bin/bash, so if they are scripts they must be
executable, we add a+x to several.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Adds the set-2038 test which sets the time to near-edge cases
like the start and end of the 32 bit epoch and checks that
time behaves properly. There is also a dangerous mode, which
lets the clock roll over past 2038 on 32bit systems, which
on some older kernels will cause system hangs.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This patch adds the set-tai test which ensures the tai offset
can be set properly from adjtimex.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This change adds the leapcrash test which tests to see if a
leapsecond deadlock which was observed from 2.6.26 to 3.3
is present on this system.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This change adds the leap-a-day test which sets STA_INS and
STA_DEL each day to trigger leapseconds each day. It also
has a mode to jump the time to right before the end of the
day each iteration.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Adds the clocksource-switch tests which continually switches the
current clocksource between all the available ones, watching for
any timekeeping inconsistencies.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This change adds the skew_consistency test, which twists the
ADJ_FREQUENCY knob back and forth and watches for timekeeping
inconsistencies.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This patch adds the change_skew test which validates the
adjtimex freq can be set to various values and then using
the inconsistency-check, raw_skew, and nanosleep tests
ensures time behaves properly.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This adds the alarmtimer-suspend test from the timetests suite,
which tests that the alarmtimers wake the system up from suspend
shortly after the time they were set to fire.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This adds a adjtimex validation test which checks the behavior
for a set of valida and invalid inputs. So far this only tests
ADJ_FREQUENCY, but hopefully will grow.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Add test to validate mqueue timeout latency from the timetest suite
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Add the threaded time inconsistency test from the timetest suite.
This checks for time inconsistencies between cpus, usually associated
with clock skew as sometimes found w/ TSCs.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Add my set-timer-lat test from the timetest suite. This
test checks the latency from set_timer and reports if
any are unreasonable (>40ms).
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This adds my clock skew estimation test from the timetest suite.
It measures the drift between CLOCK_MONOTONIC and CLOCK_MONOTONIC_RAW
and compares it with the current frequency value from adjtimex.
It sometimes can trigger false failures when ntpd isn't in a
steady state, but its a useful too when doing adjtimex testing.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Adds my nanosleep latency test from the timetest suite.
This checks to make sure we don't see "unreasonable"
latencies (> 40ms) when calling nanosleep.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This adds my inconsistency-test from my timetests suite,
which checks for (single threaded) time inconsistencies
across the various clockids.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Add my basic nanosleep test from my timetest suite.
This test validates that nanosleep doesn't return early
against a number of clockids.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
The posix_timers.c test has a loop that tries to keep it in
kernel space, repeatedly calling brk(). However, it doesn't
check the return value, which causes warnings.
This patch adds a err value which captures the return value
and modifies the test so it will quit if a failure occurs.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Try to streamline the makefile so its easier to add timer/timekeeping
tests.
Also adds support for the CROSS_COMPILE variable.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Including:
- Update of all defconfigs
- Addition of a bunch of config options to modernise our defconfigs
- Some PS3 updates from Geoff
- Optimised memcmp for 64 bit from Anton
- Fix for kprobes that allows 'perf probe' to work from Naveen
- Several cxl updates from Ian & Ryan
- Expanded support for the '24x7' PMU from Cody & Sukadev
- Freescale updates from Scott:
"Highlights include 8xx optimizations, some more work on datapath device
tree content, e300 machine check support, t1040 corenet error reporting,
and various cleanups and fixes."
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=xDU3
-----END PGP SIGNATURE-----
Merge tag 'powerpc-3.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux
Pull powerpc updates from Michael Ellerman:
- Update of all defconfigs
- Addition of a bunch of config options to modernise our defconfigs
- Some PS3 updates from Geoff
- Optimised memcmp for 64 bit from Anton
- Fix for kprobes that allows 'perf probe' to work from Naveen
- Several cxl updates from Ian & Ryan
- Expanded support for the '24x7' PMU from Cody & Sukadev
- Freescale updates from Scott:
"Highlights include 8xx optimizations, some more work on datapath
device tree content, e300 machine check support, t1040 corenet
error reporting, and various cleanups and fixes"
* tag 'powerpc-3.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (102 commits)
cxl: Add missing return statement after handling AFU errror
cxl: Fail AFU initialisation if an invalid configuration record is found
cxl: Export optional AFU configuration record in sysfs
powerpc/mm: Warn on flushing tlb page in kernel context
powerpc/powernv: Add OPAL soft-poweroff routine
powerpc/perf/hv-24x7: Document sysfs event description entries
powerpc/perf/hv-gpci: add the remaining gpci requests
powerpc/perf/{hv-gpci, hv-common}: generate requests with counters annotated
powerpc/perf/hv-24x7: parse catalog and populate sysfs with events
perf: define EVENT_DEFINE_RANGE_FORMAT_LITE helper
perf: add PMU_EVENT_ATTR_STRING() helper
perf: provide sysfs_show for struct perf_pmu_events_attr
powerpc/kernel: Avoid initializing device-tree pointer twice
powerpc: Remove old compile time disabled syscall tracing code
powerpc/kernel: Make syscall_exit a local label
cxl: Fix device_node reference counting
powerpc/mm: bail out early when flushing TLB page
powerpc: defconfigs: add MTD_SPI_NOR (new dependency for M25P80)
perf/powerpc: reset event hw state when adding it to the PMU
powerpc/qe: Use strlcpy()
...
This patch includes all of the powerpc test binaries into the .gitignore
file listing in their respective directories. This will make sure that
git ignores all of these test binaries when displaying status.
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Pull RCU updates from Paul E. McKenney:
- Documentation updates.
- Miscellaneous fixes.
- Preemptible-RCU fixes, including fixing an old bug in the
interaction of RCU priority boosting and CPU hotplug.
- SRCU updates.
- RCU CPU stall-warning updates.
- RCU torture-test updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A system misconfiguration that prevents qemu from running at all (for
example, a missing dynamically linked library) will keep the console.log
file from the previous run. This can fool the developer into thinking
that this failed run actually completed correctly. This commit therefore
overwrites the console.log file just before launching qemu.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
More recent qemu implementations really want "-enable-kvm", and the
"-soundhw pcspk" makes the script a bit less dependent on odd audio
libraries being installed. This commit therefore adds both to the
default qemu command line.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The mpstat command recently added the %gnice column, which messes up
the cpu2use.sh script's idle-CPU calculations. This commit therefore
uses $NF instead of $12 to select the last (%idle) column.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Normal rcutorture checking overestimates grace periods somewhat due to
the fact that there is a delay from a grace-period request until the
start of the corresponding grace period and another delay from the end
of that grace period to notification of the requestor. This means that
rcutorture's detection of RCU bugs is less sensitive than it might be.
It turns out that rcutorture also checks the underlying grace-period
"completed" counter (displayed in Reader Batch output), which in theory
allows rcutorture to do exact checks. In practice, memory misordering
(by both compiler and CPU) can result in false positives. However,
experience on x86 shows that these false positives are quite rare,
occurring less than one time per 1,000 hours of testing. This commit
therefore does the exact checking, giving a warning if any Reader Batch
blows happen, and flagging an error if they happen more often than
once every three hours in long tests.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
add -lrt to fix undefined reference to `clock_gettime'
error seen when the test is compiled using gcc 4.6.4.
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
We can't use a char type to check for a negative return value since char
isn't guaranteed to be signed. Indeed, the char type tends to be unsigned on
ARM.
Signed-off-by: dann frazier <dann.frazier@canonical.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
When the shell fails to invoke a script because its path name
is too long (ENAMETOOLONG), most shells return 127 to indicate
command not found. However, some systems report 126 (which POSIX
suggests should indicate a non-executable file) for this case,
so allow that too.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David Drysdale <drysdale@google.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
The current rcutorture scripting checks for actual stalls (via the "Call
Trace:" check), but fails to spot the case where a stall ends just as it
is being detected. This commit therefore adds a check for this case.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
On 32-bit:
execveat.c: In function 'check_execveat_pathmax':
execveat.c:183: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'size_t'
execveat.c:187: warning: format '%lu' expects type 'long unsigned int', but argument 2 has type 'size_t'
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This list is supposed to be sorted, to reduce patch collisions.
Cc: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull user namespace related fixes from Eric Biederman:
"As these are bug fixes almost all of thes changes are marked for
backporting to stable.
The first change (implicitly adding MNT_NODEV on remount) addresses a
regression that was created when security issues with unprivileged
remount were closed. I go on to update the remount test to make it
easy to detect if this issue reoccurs.
Then there are a handful of mount and umount related fixes.
Then half of the changes deal with the a recently discovered design
bug in the permission checks of gid_map. Unix since the beginning has
allowed setting group permissions on files to less than the user and
other permissions (aka ---rwx---rwx). As the unix permission checks
stop as soon as a group matches, and setgroups allows setting groups
that can not later be dropped, results in a situtation where it is
possible to legitimately use a group to assign fewer privileges to a
process. Which means dropping a group can increase a processes
privileges.
The fix I have adopted is that gid_map is now no longer writable
without privilege unless the new file /proc/self/setgroups has been
set to permanently disable setgroups.
The bulk of user namespace using applications even the applications
using applications using user namespaces without privilege remain
unaffected by this change. Unfortunately this ix breaks a couple user
space applications, that were relying on the problematic behavior (one
of which was tools/selftests/mount/unprivileged-remount-test.c).
To hopefully prevent needing a regression fix on top of my security
fix I rounded folks who work with the container implementations mostly
like to be affected and encouraged them to test the changes.
> So far nothing broke on my libvirt-lxc test bed. :-)
> Tested with openSUSE 13.2 and libvirt 1.2.9.
> Tested-by: Richard Weinberger <richard@nod.at>
> Tested on Fedora20 with libvirt 1.2.11, works fine.
> Tested-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
> Ok, thanks - yes, unprivileged lxc is working fine with your kernels.
> Just to be sure I was testing the right thing I also tested using
> my unprivileged nsexec testcases, and they failed on setgroup/setgid
> as now expected, and succeeded there without your patches.
> Tested-by: Serge Hallyn <serge.hallyn@ubuntu.com>
> I tested this with Sandstorm. It breaks as is and it works if I add
> the setgroups thing.
> Tested-by: Andy Lutomirski <luto@amacapital.net> # breaks things as designed :("
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
userns: Unbreak the unprivileged remount tests
userns; Correct the comment in map_write
userns: Allow setting gid_maps without privilege when setgroups is disabled
userns: Add a knob to disable setgroups on a per user namespace basis
userns: Rename id_map_mutex to userns_state_mutex
userns: Only allow the creator of the userns unprivileged mappings
userns: Check euid no fsuid when establishing an unprivileged uid mapping
userns: Don't allow unprivileged creation of gid mappings
userns: Don't allow setgroups until a gid mapping has been setablished
userns: Document what the invariant required for safe unprivileged mappings.
groups: Consolidate the setgroups permission checks
mnt: Clear mnt_expire during pivot_root
mnt: Carefully set CL_UNPRIVILEGED in clone_mnt
mnt: Move the clear of MNT_LOCKED from copy_tree to it's callers.
umount: Do not allow unmounting rootfs.
umount: Disallow unprivileged mount force
mnt: Update unprivileged remount test
mnt: Implicitly add MNT_NODEV on remount when it was implicitly added by mount
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJUj0wTAAoJEAsCRMQNDUMc/jEQAIcMbtui9jj2B7gfgYpRHX/7
osfaYgjm2aMc0ccC8hn2WVotnhR2tcg3nOaYRf8/VssNhcQYoAReN2+nHp0LZ/kl
A8gdh7xq79asM9fZ8pkrvqyyeyBXAZsfQnwOfu1iDa6h0GGGzz7MJZ+f2ky1bPJs
zf4P2JTpr5jh6lflU1mY+STXOcFojHfy5wr9zgGpGUGxXihiUyVjv31+HbZaVoRV
7khTuIMPIIkyVXQKTJSJpqZkShoKj6DVResIjEai9oH2LM1WbXVDqitgsEdyErOG
jm9aF0FRdQm3chXN5KKgOvIcatdhP+kypis/3zSb7zO0aAtIVkNo4PSEaYoC9Huz
BfFKJbm+j+3alEb/51R0XCcj04qcjhhbx+vhEQpucGb1dnT9C9kRSCYDZH/o0+YZ
ozgGaiH4IGxoZraxL2QuwxDs5/x8QzAOg/p/bgztgIVkjvjLk8G8+wTo21946vGr
lpE/fz3DILxL1mQNPjohjFm/FSXb94fQGWb4RQ34x/sJJgus7bz7ftzaeVNqBSbU
PILJG2QuwT1xxEV44eXTCQycQTZQ/v8o2R0QzjzqR5hU7Oz6d86Rt+ijNO+JFWuA
kFCm1EdhSirzZ5R2V3IjQKJGhwXZMs4+BINA14FP9zik1xYSH2Sx+o2fWJ335rzm
geA73v1btvT1xQ0mrI+K
=DL3K
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest update from Shuah Khan:
"kselftest updates for 3.19-rc1:
- kcmp test include file cleanup
- kcmp change to build on all architectures
- A light weight kselftest framework that provides a set of
interfaces for tests to use to report results. In addition,
several tests are updated to use the framework.
- A new runtime system size test that prints the amount of RAM that
the currently running system is using"
* tag 'linux-kselftest-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftest: size: Add size test for Linux kernel
selftests/kcmp: Always try to build the test
selftests/kcmp: Don't include kernel headers
kcmp: Move kcmp.h into uapi
selftests/timers: change test to use ksft framework
selftests/kcmp: change test to use ksft framework
selftests/ipc: change test to use ksft framework
selftests/breakpoints: change test to use ksft framework
selftests: add kselftest framework for uniform test reporting
selftests/user: move test out of Makefile into a shell script
selftests/net: move test out of Makefile into a shell script
Merge second patchbomb from Andrew Morton:
- the rest of MM
- misc fs fixes
- add execveat() syscall
- new ratelimit feature for fault-injection
- decompressor updates
- ipc/ updates
- fallocate feature creep
- fsnotify cleanups
- a few other misc things
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (99 commits)
cgroups: Documentation: fix trivial typos and wrong paragraph numberings
parisc: percpu: update comments referring to __get_cpu_var
percpu: update local_ops.txt to reflect this_cpu operations
percpu: remove __get_cpu_var and __raw_get_cpu_var macros
fsnotify: remove destroy_list from fsnotify_mark
fsnotify: unify inode and mount marks handling
fallocate: create FAN_MODIFY and IN_MODIFY events
mm/cma: make kmemleak ignore CMA regions
slub: fix cpuset check in get_any_partial
slab: fix cpuset check in fallback_alloc
shmdt: use i_size_read() instead of ->i_size
ipc/shm.c: fix overly aggressive shmdt() when calls span multiple segments
ipc/msg: increase MSGMNI, remove scaling
ipc/sem.c: increase SEMMSL, SEMMNI, SEMOPM
ipc/sem.c: change memory barrier in sem_lock() to smp_rmb()
lib/decompress.c: consistency of compress formats for kernel image
decompress_bunzip2: off by one in get_next_block()
usr/Kconfig: make initrd compression algorithm selection not expert
fault-inject: add ratelimit option
ratelimit: add initialization macro
...
Michael Ellerman