Apparently, some machines used to report DRAM errors through a PCI SERR
NMI. This is why we have a call into EDAC in the NMI handler. See
c0d1217202 ("drivers/edac: add new nmi rescan").
From looking at the patch above, that's two drivers: e752x_edac.c and
e7xxx_edac.c. Now, I wanna say those are old machines which are probably
decommissioned already.
Tony says that "[t]the newest CPU supported by either of those drivers
is the Xeon E7520 (a.k.a. "Nehalem") released in Q1'2010. Possibly some
folks are still using these ... but people that hold onto h/w for 7
years generally cling to old s/w too ... so I'd guess it unlikely that
we will get complaints for breaking these in upstream."
So even if there is a small number still in use, we did load EDAC with
edac_op_state == EDAC_OPSTATE_POLL by default (we still do, in fact)
which means a default EDAC setup without any parameters supplied on the
command line or otherwise would never even log the error in the NMI
handler because we're polling by default:
inline int edac_handler_set(void)
{
if (edac_op_state == EDAC_OPSTATE_POLL)
return 0;
return atomic_read(&edac_handlers);
}
So, long story short, I'd like to get rid of that nastiness called
edac_stub.c and confine all the EDAC drivers solely to drivers/edac/. If
we ever have to do stuff like that again, it should be notifiers we're
using and not some insanity like this one.
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Remove the WARNING message associated with multiple NMI handlers as
there are at least two that are legitimate. These are the KGDB and the
UV handlers and both want to be called if the NMI has not been claimed
by any other NMI handler.
Use of the UNKNOWN NMI call chain dramatically lowers the NMI call rate
when high frequency NMI tools are in use, notably the perf tools. It is
required on systems that cannot sustain a high NMI call rate without
adversely affecting the system operation.
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Reviewed-by: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Russ Anderson <russ.anderson@hpe.com>
Cc: Frank Ramsay <frank.ramsay@hpe.com>
Cc: Tony Ernst <tony.ernst@hpe.com>
Link: http://lkml.kernel.org/r/20170307210841.730959611@asylum.americas.sgi.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We are going to split <linux/sched/debug.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.
Create a trivial placeholder <linux/sched/debug.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We are going to split <linux/sched/clock.h> out of <linux/sched.h>, which
will have to be picked up from other headers and .c files.
Create a trivial placeholder <linux/sched/clock.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When building random configurations, we now occasionally get a new
build error:
In file included from include/linux/kernel.h:13:0,
from include/linux/list.h:8,
from include/linux/preempt.h:10,
from include/linux/spinlock.h:50,
from arch/x86/kernel/nmi.c:13:
arch/x86/kernel/nmi.c: In function 'nmi_max_handler':
include/linux/printk.h:375:9: error: type defaults to 'int' in declaration of 'DEFINE_RATELIMIT_STATE' [-Werror=implicit-int]
static DEFINE_RATELIMIT_STATE(_rs, \
^
arch/x86/kernel/nmi.c:110:2: note: in expansion of macro 'printk_ratelimited'
printk_ratelimited(KERN_INFO
^~~~~~~~~~~~~~~~~~
This was working before the rtc rework series because linux/ratelimit.h
was included implictly through asm/mach_traps.h -> asm/mc146818rtc.h
-> linux/mc146818rtc.h -> linux/rtc.h -> linux/device.h.
We clearly shouldn't rely on this indirect inclusion, so this adds
an explicit #include in the file that needs it.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Fixes: 5ab788d738 ("rtc: cmos: move mc146818rtc code out of asm-generic/rtc.h")
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
ignore_nmis is used in two distinct places:
1. modified through {stop,restart}_nmi by alternative_instructions
2. read by do_nmi to determine if default_do_nmi should be called or not
thus the access pattern conforms to __read_mostly and do_nmi() is a fastpath.
Signed-off-by: Kostenzer Felix <fkostenzer@live.at>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now, multiple CPUs can receive an external NMI simultaneously by
specifying the "apic_extnmi=all" command line parameter. When we take
a crash dump by using external NMI with this option, we fail to save
registers into the crash dump. This happens as follows:
CPU 0 CPU 1
================================ =============================
receive an external NMI
default_do_nmi() receive an external NMI
spin_lock(&nmi_reason_lock) default_do_nmi()
io_check_error() spin_lock(&nmi_reason_lock)
panic() busy loop
...
kdump_nmi_shootdown_cpus()
issue NMI IPI -----------> blocked until IRET
busy loop...
Here, since CPU 1 is in NMI context, an additional NMI from CPU 0
remains unhandled until CPU 1 IRETs. However, CPU 1 will never execute
IRET so the NMI is not handled and the callback function to save
registers is never called.
To solve this issue, we check if the IPI for crash dumping was issued
while waiting for nmi_reason_lock to be released, and if so, call its
callback function directly. If the IPI is not issued (e.g. kdump is
disabled), the actual behavior doesn't change.
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: kexec@lists.infradead.org
Cc: linux-doc@vger.kernel.org
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/20151210065245.4587.39316.stgit@softrs
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Currently, kdump_nmi_shootdown_cpus(), a subroutine of crash_kexec(),
sends an NMI IPI to CPUs which haven't called panic() to stop them,
save their register information and do some cleanups for crash dumping.
However, if such a CPU is infinitely looping in NMI context, we fail to
save its register information into the crash dump.
For example, this can happen when unknown NMIs are broadcast to all
CPUs as follows:
CPU 0 CPU 1
=========================== ==========================
receive an unknown NMI
unknown_nmi_error()
panic() receive an unknown NMI
spin_trylock(&panic_lock) unknown_nmi_error()
crash_kexec() panic()
spin_trylock(&panic_lock)
panic_smp_self_stop()
infinite loop
kdump_nmi_shootdown_cpus()
issue NMI IPI -----------> blocked until IRET
infinite loop...
Here, since CPU 1 is in NMI context, the second NMI from CPU 0 is
blocked until CPU 1 executes IRET. However, CPU 1 never executes IRET,
so the NMI is not handled and the callback function to save registers is
never called.
In practice, this can happen on some servers which broadcast NMIs to all
CPUs when the NMI button is pushed.
To save registers in this case, we need to:
a) Return from NMI handler instead of looping infinitely
or
b) Call the callback function directly from the infinite loop
Inherently, a) is risky because NMI is also used to prevent corrupted
data from being propagated to devices. So, we chose b).
This patch does the following:
1. Move the infinite looping of CPUs which haven't called panic() in NMI
context (actually done by panic_smp_self_stop()) outside of panic() to
enable us to refer pt_regs. Please note that panic_smp_self_stop() is
still used for normal context.
2. Call a callback of kdump_nmi_shootdown_cpus() directly to save
registers and do some cleanups after setting waiting_for_crash_ipi which
is used for counting down the number of CPUs which handled the callback
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Gobinda Charan Maji <gobinda.cemk07@gmail.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Javi Merino <javi.merino@arm.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: kexec@lists.infradead.org
Cc: linux-doc@vger.kernel.org
Cc: lkml <linux-kernel@vger.kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Link: http://lkml.kernel.org/r/20151210014628.25437.75256.stgit@softrs
[ Cleanup comments, fixup formatting. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
If panic on NMI happens just after panic() on the same CPU, panic() is
recursively called. Kernel stalls, as a result, after failing to acquire
panic_lock.
To avoid this problem, don't call panic() in NMI context if we've
already entered panic().
For that, introduce nmi_panic() macro to reduce code duplication. In
the case of panic on NMI, don't return from NMI handlers if another CPU
already panicked.
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Gobinda Charan Maji <gobinda.cemk07@gmail.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Javi Merino <javi.merino@arm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: kexec@lists.infradead.org
Cc: linux-doc@vger.kernel.org
Cc: lkml <linux-kernel@vger.kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Link: http://lkml.kernel.org/r/20151210014626.25437.13302.stgit@softrs
[ Cleanup comments, fixup formatting. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
It has never had any effect. Remove it for comprehensibility.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/c91fa38507760d9e54a4b8737fa6409bde896b33.1437418322.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
I found the nested NMI documentation to be difficult to follow.
Improve the comments.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
32-bit kernels handle nested NMIs in C. Enable the exact same
handling on 64-bit kernels as well. This isn't currently
necessary, but it will become necessary once the asm code starts
allowing limited nesting.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use NOKPROBE_SYMBOL macro for protecting functions
from kprobes instead of __kprobes annotation under
arch/x86.
This applies nokprobe_inline annotation for some cases,
because NOKPROBE_SYMBOL() will inhibit inlining by
referring the symbol address.
This just folds a bunch of previous NOKPROBE_SYMBOL()
cleanup patches for x86 to one patch.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/r/20140417081814.26341.51656.stgit@ltc230.yrl.intra.hitachi.co.jp
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fernando Luis Vázquez Cao <fernando_b1@lab.ntt.co.jp>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Lebon <jlebon@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Calling printk() from NMI context is bad (TM), so move it to IRQ
context.
In doing so we slightly change (probably wreck) the debugfs
nmi_longest_ns thingy, in that it doesn't update to reflect the
longest, nor does writing to it reset the count.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Link: http://lkml.kernel.org/n/tip-rdw0au56a5ymis1u8p48c12d@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
OK, so what I'm actually seeing on my WSM is that sched/clock.c is
'broken' for the purpose we're using it for.
What triggered it is that my WSM-EP is broken :-(
[ 0.001000] tsc: Fast TSC calibration using PIT
[ 0.002000] tsc: Detected 2533.715 MHz processor
[ 0.500180] TSC synchronization [CPU#0 -> CPU#6]:
[ 0.505197] Measured 3 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.004000] tsc: Marking TSC unstable due to check_tsc_sync_source failed
For some reason it consistently detects TSC skew, even though NHM+
should have a single clock domain for 'reasonable' systems.
This marks sched_clock_stable=0, which means that we do fancy stuff to
try and get a 'sane' clock. Part of this fancy stuff relies on the tick,
clearly that's gone when NOHZ=y. So for idle cpus time gets stuck, until
it either wakes up or gets kicked by another cpu.
While this is perfectly fine for the scheduler -- it only cares about
actually running stuff, and when we're running stuff we're obviously not
idle. This does somewhat break down for perf which can trigger events
just fine on an otherwise idle cpu.
So I've got NMIs get get 'measured' as taking ~1ms, which actually
don't last nearly that long:
<idle>-0 [013] d.h. 886.311970: rcu_nmi_enter <-do_nmi
...
<idle>-0 [013] d.h. 886.311997: perf_sample_event_took: HERE!!! : 1040990
So ftrace (which uses sched_clock(), not the fancy bits) only sees
~27us, but we measure ~1ms !!
Now since all this measurement stuff lives in x86 code, we can actually
fix it.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: mingo@kernel.org
Cc: dave.hansen@linux.intel.com
Cc: eranian@google.com
Cc: Don Zickus <dzickus@redhat.com>
Cc: jmario@redhat.com
Cc: acme@infradead.org
Link: http://lkml.kernel.org/r/20131017133350.GG3364@laptop.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
I completely botched understanding the calling conventions of
do_div(). I assumed that do_div() returned the result instead
of realizing that it modifies its argument and returns a
remainder. The side-effect from this would be bogus numbers
for the "msecs" value in the warning messages:
INFO: NMI handler (perf_event_nmi_handler) took too long to run: 0.114 msecs
Note, there was a second fix posted by Stephane Eranian for
a separate patch which I also botched:
http://lkml.kernel.org/r/20130704223010.GA30625@quad
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Hansen <dave@sr71.net>
Link: http://lkml.kernel.org/r/20130708214404.B0B6EA66@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch has been invaluable in my adventures finding
issues in the perf NMI handler. I'm as big a fan of
printk() as anybody is, but using printk() in NMIs is
deadly when they're happening frequently.
Even hacking in trace_printk() ended up eating enough
CPU to throw off some of the measurements I was making.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus@samba.org
Cc: acme@ghostprotocols.net
Cc: Dave Hansen <dave@sr71.net>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
I have a system which is causing all kinds of problems. It has
8 NUMA nodes, and lots of cores that can fight over cachelines.
If things are not working _perfectly_, then NMIs can take longer
than expected.
If we get too many of them backed up to each other, we can
easily end up in a situation where we are doing nothing *but*
running NMIs. The biggest problem, though, is that this happens
_silently_. You might be lucky to get an hrtimer warning, but
most of the time system simply hangs.
This patch should at least give us some warning before we fall
off the cliff. the warnings look like this:
nmi_handle: perf_event_nmi_handler() took: 26095071 ns
The message is triggered whenever we notice the longest NMI
we've seen to date. You can always view and reset this value
via the debugfs interface if you like.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus@samba.org
Cc: acme@ghostprotocols.net
Cc: Dave Hansen <dave@sr71.net>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Avi Kivity reported that page faults in NMIs could cause havic if
the NMI preempted another page fault handler:
The recent changes to NMI allow exceptions to take place in NMI
handlers, but I think that a #PF (say, due to access to vmalloc space)
is still problematic. Consider the sequence
#PF (cr2 set by processor)
NMI
...
#PF (cr2 clobbered)
do_page_fault()
IRET
...
IRET
do_page_fault()
address = read_cr2()
The last line reads the overwritten cr2 value.
This is the i386 version, which has the luxury of doing the work
in C code.
Link: http://lkml.kernel.org/r/4FBB8C40.6080304@redhat.com
Reported-by: Avi Kivity <avi@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
I've been informed by someone on LWN called 'slashdot' that
some i386 machines do not support a true cmpxchg. The cmpxchg
used by the i386 NMI nesting code must be a true cmpxchg as
disabling interrupts will not work for NMIs (which is the work
around for i386s that do not have a true cmpxchg).
This 'slashdot' character also suggested a fix to the issue.
As the state of the nesting NMIs goes as follows:
NOT_RUNNING -> EXECUTING
EXECUTING -> NOT_RUNNING
EXECUTING -> LATCHED
LATCHED -> EXECUTING
Having these states as enum values of:
NOT_RUNNING = 0
EXECUTING = 1
LATCHED = 2
Instead of a cmpxchg to make EXECUTING -> NOT_RUNNING a
dec_and_test() would work as well. If the dec_and_test brings
the state to NOT_RUNNING, that is the same as a cmpxchg
succeeding to change EXECUTING to NOT_RUNNING. If a nested NMI
were to come in and change it to LATCHED, the dec_and_test() would
convert the state to EXECUTING (what we want it to be in such a
case anyway).
I asked 'slashdot' to post this as a patch, but it never came to
be. I decided to do the work instead.
Thanks to H. Peter Anvin for suggesting to use this_cpu_dec_and_return()
instead of local_dec_and_test(&__get_cpu_var()).
Link: http://lwn.net/Articles/484932/
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When an NMI goes off and it sees that it preempted the debug stack,
to keep the debug stack safe, it changes the IDT to point to one that
does not modify the stack on breakpoint (to allow breakpoints in NMIs).
But the variable that gets set to know to undo it on exit never gets
cleared on exit. Thus every NMI will reset it on exit the first time
it is done even if it does not need to be reset.
[ Added H. Peter Anvin's suggestion to use this_cpu_read/write ]
Cc: <stable@vger.kernel.org> # v3.3
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull the MCA deletion branch from Paul Gortmaker:
"It was good that we could support MCA machines back in the day, but
realistically, nobody is using them anymore. They were mostly limited
to 386-sx 16MHz CPU and some 486 class machines and never more than
64MB of RAM. Even the enthusiast hobbyist community seems to have
dried up close to ten years ago, based on what you can find searching
various websites dedicated to the relatively short lived hardware.
So lets remove the support relating to CONFIG_MCA. There is no point
carrying this forward, wasting cycles doing routine maintenance on it;
wasting allyesconfig build time on validating it, wasting I/O on git
grep'ping over it, and so on."
Let's see if anybody screams. It generally has compiled, and James
Bottomley pointed out that there was a MCA extension from NCR that
allowed for up to 4GB of memory and PPro-class machines. So in *theory*
there may be users out there.
But even James (technically listed as a maintainer) doesn't actually
have a system, and while Alan Cox claims to have a machine in his cellar
that he offered to anybody who wants to take it off his hands, he didn't
argue for keeping MCA support either.
So we could bring it back. But somebody had better speak up and talk
about how they have actually been using said MCA hardware with modern
kernels for us to do that. And David already took the patch to delete
all the networking driver code (commit a5e371f61ad3: "drivers/net:
delete all code/drivers depending on CONFIG_MCA").
* 'delete-mca' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
MCA: delete all remaining traces of microchannel bus support.
scsi: delete the MCA specific drivers and driver code
serial: delete the MCA specific 8250 support.
arm: remove ability to select CONFIG_MCA
Pull perf changes from Ingo Molnar:
"Lots of changes:
- (much) improved assembly annotation support in perf report, with
jump visualization, searching, navigation, visual output
improvements and more.
- kernel support for AMD IBS PMU hardware features. Notably 'perf
record -e cycles:p' and 'perf top -e cycles:p' should work without
skid now, like PEBS does on the Intel side, because it takes
advantage of IBS transparently.
- the libtracevents library: it is the first step towards unifying
tracing tooling and perf, and it also gives a tracing library for
external tools like powertop to rely on.
- infrastructure: various improvements and refactoring of the UI
modules and related code
- infrastructure: cleanup and simplification of the profiling
targets code (--uid, --pid, --tid, --cpu, --all-cpus, etc.)
- tons of robustness fixes all around
- various ftrace updates: speedups, cleanups, robustness
improvements.
- typing 'make' in tools/ will now give you a menu of projects to
build and a short help text to explain what each does.
- ... and lots of other changes I forgot to list.
The perf record make bzImage + perf report regression you reported
should be fixed."
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (166 commits)
tracing: Remove kernel_lock annotations
tracing: Fix initial buffer_size_kb state
ring-buffer: Merge separate resize loops
perf evsel: Create events initially disabled -- again
perf tools: Split term type into value type and term type
perf hists: Fix callchain ip printf format
perf target: Add uses_mmap field
ftrace: Remove selecting FRAME_POINTER with FUNCTION_TRACER
ftrace/x86: Have x86 ftrace use the ftrace_modify_all_code()
ftrace: Make ftrace_modify_all_code() global for archs to use
ftrace: Return record ip addr for ftrace_location()
ftrace: Consolidate ftrace_location() and ftrace_text_reserved()
ftrace: Speed up search by skipping pages by address
ftrace: Remove extra helper functions
ftrace: Sort all function addresses, not just per page
tracing: change CPU ring buffer state from tracing_cpumask
tracing: Check return value of tracing_dentry_percpu()
ring-buffer: Reset head page before running self test
ring-buffer: Add integrity check at end of iter read
ring-buffer: Make addition of pages in ring buffer atomic
...
Hardware with MCA bus is limited to 386 and 486 class machines
that are now 20+ years old and typically with less than 32MB
of memory. A quick search on the internet, and you see that
even the MCA hobbyist/enthusiast community has lost interest
in the early 2000 era and never really even moved ahead from
the 2.4 kernels to the 2.6 series.
This deletes anything remaining related to CONFIG_MCA from core
kernel code and from the x86 architecture. There is no point in
carrying this any further into the future.
One complication to watch for is inadvertently scooping up
stuff relating to machine check, since there is overlap in
the TLA name space (e.g. arch/x86/boot/mca.c).
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: x86@kernel.org
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
What was called show_registers() so far already showed a stack
trace for kernel faults, and kernel_stack_pointer() isn't even
valid to be used for faults from user mode, hence it was
pointless for show_regs() to call show_trace() after
show_registers().
Simply rename show_registers() to show_regs() and eliminate
the old definition.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/4FAA3D3902000078000826E1@nat28.tlf.novell.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
As ftrace function tracing would require modifying code that could
be executed in NMI context, which is not stopped with stop_machine(),
ftrace had to do a complex algorithm with various stages of setup
and memory barriers to make it work.
With the new breakpoint method, this is no longer required. The changes
to the code can be done without any problem in NMI context, as well as
without stop machine altogether. Remove the complex code as it is
no longer needed.
Also, a lot of the notrace annotations could be removed from the
NMI code as it is now safe to trace them. With the exception of
do_nmi itself, which does some special work to handle running in
the debug stack. The breakpoint method can cause NMIs to double
nest the debug stack if it's not setup properly, and that is done
in do_nmi(), thus that function must not be traced.
(Note the arch sh may want to do the same)
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch tries to fix the problem of page fault exception
caused by accessing nmiaction structure in nmi if kmemcheck
is enabled.
If kmemcheck is enabled, the memory allocated through slab are
in pages that are marked non-present, so that some checks could
be done in the page fault handling code ( e.g. whether the
memory is read before written to ).
As nmiaction is allocated in this way, so it resides in a
non-present page. Then there is a page fault while the nmi code
accessing the nmiaction structure, which would then cause a
warning by WARN_ON_ONCE(in_nmi()) in kmemcheck_fault(), called
by do_page_fault().
This significantly simplifies the code as well, as the whole
dynamic allocation dance goes away.
v2: as Peter suggested, changed the nmiaction to use static
storage.
v3: as Peter suggested, use macro to shorten the codes. Also
keep the original usage of register_nmi_handler, so users of
this call doesn't need change.
Tested-by: Seiji Aguchi <seiji.aguchi@hds.com>
Fixes: https://lkml.org/lkml/2012/3/2/356
Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com>
[ simplified the wrappers ]
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: thomas.mingarelli@hp.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1333051877-15755-4-git-send-email-dzickus@redhat.com
[ tidied the patch a bit ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In discussions with Thomas Mingarelli about hpwdt, he explained
to me some issues they were some when using their virtual NMI
button to test the hpwdt driver.
It turns out the virtual NMI button used on HP's machines do no
send unknown NMIs but instead send IO_CHK NMIs. The way the
kernel code is written, the hpwdt driver can not register itself
against that type of NMI and therefore can not successfully
capture system information before panic'ing.
To solve this I created two new NMI queues to allow driver to
register against the IO_CHK and SERR NMIs. Or in the hpwdt all
three (if you include unknown NMIs too).
The change is straightforward and just mimics what the unknown
NMI does.
Reported-and-tested-by: Thomas Mingarelli <thomas.mingarelli@hp.com>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1333051877-15755-3-git-send-email-dzickus@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
With i386, NMIs and breakpoints use the current stack and they
do not reset the stack pointer to a fix point that might corrupt
a previous NMI or breakpoint (as it does in x86_64). But NMIs are
still not made to be re-entrant, and need to prevent the case that
an NMI hitting a breakpoint (which does an iret), doesn't allow
another NMI to run.
The fix is to let the NMI be in 3 different states:
1) not running
2) executing
3) latched
When no NMI is executing on a given CPU, the state is "not running".
When the first NMI comes in, the state is switched to "executing".
On exit of that NMI, a cmpxchg is performed to switch the state
back to "not running" and if that fails, the NMI is restarted.
If a breakpoint is hit and does an iret, which re-enables NMIs,
and another NMI comes in before the first NMI finished, it will
detect that the state is not in the "not running" state and the
current NMI is nested. In this case, the state is switched to "latched"
to let the interrupted NMI know to restart the NMI handler, and
the nested NMI exits without doing anything.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Paul Turner <pjt@google.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
We want to allow NMI handlers to have breakpoints to be able to
remove stop_machine from ftrace, kprobes and jump_labels. But if
an NMI interrupts a current breakpoint, and then it triggers a
breakpoint itself, it will switch to the breakpoint stack and
corrupt the data on it for the breakpoint processing that it
interrupted.
Instead, have the NMI check if it interrupted breakpoint processing
by checking if the stack that is currently used is a breakpoint
stack. If it is, then load a special IDT that changes the IST
for the debug exception to keep the same stack in kernel context.
When the NMI is done, it puts it back.
This way, if the NMI does trigger a breakpoint, it will keep
using the same stack and not stomp on the breakpoint data for
the breakpoint it interrupted.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
with "apic=verbose" the print_IO_APIC() function tries to print
IRQ to pin mappings for every active irq. It assumes chip_data
is of type irq_cfg and may cause an oops if not.
As the print_IO_APIC() is called from a late_initcall other
chained irq chips may already be registered with custom
chip_data information, causing an oops. This is the case with
intel MID SoC devices with gpio demuxers registered as irq_chips.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
[ -v2: fixed build failure ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Moorestown/Medfield platform does not have port 0x61 to report
NMI status, nor does it have external NMI sources. The only NMI
sources are from lapic, as results of perf counter overflow or
IPI, e.g. NMI watchdog or spin lock debug.
Reading port 0x61 on Moorestown will return 0xff which misled
NMI handlers to false critical errors such memory parity error.
The subsequent ioport access for NMI handling can also cause
undefined behavior on Moorestown.
This patch allows kernel process NMI due to watchdog or backrace
dump without unnecessary hangs.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
[hand applied]
Signed-off-by: Alan Cox <alan@linux.intel.com>
These files were implicitly getting EXPORT_SYMBOL via device.h
which was including module.h, but that will be fixed up shortly.
By fixing these now, we can avoid seeing things like:
arch/x86/kernel/rtc.c:29: warning: type defaults to ‘int’ in declaration of ‘EXPORT_SYMBOL’
arch/x86/kernel/pci-dma.c:20: warning: type defaults to ‘int’ in declaration of ‘EXPORT_SYMBOL’
arch/x86/kernel/e820.c:69: warning: type defaults to ‘int’ in declaration of ‘EXPORT_SYMBOL_GPL’
[ with input from Randy Dunlap <rdunlap@xenotime.net> and also
from Stephen Rothwell <sfr@canb.auug.org.au> ]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
nmi.c needs an #include <linux/mca.h>:
arch/x86/kernel/nmi.c: In function ‘unknown_nmi_error’:
arch/x86/kernel/nmi.c:286:6: error: ‘MCA_bus’ undeclared (first use in this function)
arch/x86/kernel/nmi.c:286:6: note: each undeclared identifier is reported only once for each function it appears in
Another one is the hpwdt driver:
drivers/watchdog/hpwdt.c:507:9: error: ‘NMI_DONE’ undeclared (first use in this function)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Now that the NMI handler are broken into lists, increment the appropriate
stats for each list. This allows us to see what is going on when they
get printed out in the next patch.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1317409584-23662-6-git-send-email-dzickus@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Previous patches allow the NMI subsystem to process multipe NMI events
in one NMI. As previously discussed this can cause issues when an event
triggered another NMI but is processed in the current NMI. This causes the
next NMI to go unprocessed and become an 'unknown' NMI.
To handle this, we first have to flag whether or not the NMI handler handled
more than one event or not. If it did, then there exists a chance that
the next NMI might be already processed. Once the NMI is flagged as a
candidate to be swallowed, we next look for a back-to-back NMI condition.
This is determined by looking at the %rip from pt_regs. If it is the same
as the previous NMI, it is assumed the cpu did not have a chance to jump
back into a non-NMI context and execute code and instead handled another NMI.
If both of those conditions are true then we will swallow any unknown NMI.
There still exists a chance that we accidentally swallow a real unknown NMI,
but for now things seem better.
An optimization has also been added to the nmi notifier rountine. Because x86
can latch up to one NMI while currently processing an NMI, we don't have to
worry about executing _all_ the handlers in a standalone NMI. The idea is
if multiple NMIs come in, the second NMI will represent them. For those
back-to-back NMI cases, we have the potentail to drop NMIs. Therefore only
execute all the handlers in the second half of a detected back-to-back NMI.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1317409584-23662-5-git-send-email-dzickus@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Just convert all the files that have an nmi handler to the new routines.
Most of it is straight forward conversion. A couple of places needed some
tweaking like kgdb which separates the debug notifier from the nmi handler
and mce removes a call to notify_die.
[Thanks to Ying for finding out the history behind that mce call
https://lkml.org/lkml/2010/5/27/114
And Boris responding that he would like to remove that call because of it
https://lkml.org/lkml/2011/9/21/163]
The things that get converted are the registeration/unregistration routines
and the nmi handler itself has its args changed along with code removal
to check which list it is on (most are on one NMI list except for kgdb
which has both an NMI routine and an NMI Unknown routine).
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Corey Minyard <minyard@acm.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Corey Minyard <minyard@acm.org>
Cc: Jack Steiner <steiner@sgi.com>
Link: http://lkml.kernel.org/r/1317409584-23662-4-git-send-email-dzickus@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The NMI handlers used to rely on the notifier infrastructure. This worked
great until we wanted to support handling multiple events better.
One of the key ideas to the nmi handling is to process _all_ the handlers for
each NMI. The reason behind this switch is because NMIs are edge triggered.
If enough NMIs are triggered, then they could be lost because the cpu can
only latch at most one NMI (besides the one currently being processed).
In order to deal with this we have decided to process all the NMI handlers
for each NMI. This allows the handlers to determine if they recieved an
event or not (the ones that can not determine this will be left to fend
for themselves on the unknown NMI list).
As a result of this change it is now possible to have an extra NMI that
was destined to be received for an already processed event. Because the
event was processed in the previous NMI, this NMI gets dropped and becomes
an 'unknown' NMI. This of course will cause printks that scare people.
However, we prefer to have extra NMIs as opposed to losing NMIs and as such
are have developed a basic mechanism to catch most of them. That will be
a later patch.
To accomplish this idea, I unhooked the nmi handlers from the notifier
routines and created a new mechanism loosely based on doIRQ. The reason
for this is the notifier routines have a couple of shortcomings. One we
could't guarantee all future NMI handlers used NOTIFY_OK instead of
NOTIFY_STOP. Second, we couldn't keep track of the number of events being
handled in each routine (most only handle one, perf can handle more than one).
Third, I wanted to eventually display which nmi handlers are registered in
the system in /proc/interrupts to help see who is generating NMIs.
The patch below just implements the new infrastructure but doesn't wire it up
yet (that is the next patch). Its design is based on doIRQ structs and the
atomic notifier routines. So the rcu stuff in the patch isn't entirely untested
(as the notifier routines have soaked it) but it should be double checked in
case I copied the code wrong.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1317409584-23662-3-git-send-email-dzickus@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The nmi stuff is changing a lot and adding more functionality. Split it
out from the traps.c file so it doesn't continue to pollute that file.
This makes it easier to find and expand all the future nmi related work.
No real functional changes here.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1317409584-23662-2-git-send-email-dzickus@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
arch/x86/kernel/ is getting a bit crowded, and the APIC
drivers are scattered into various different files.
Move them to arch/x86/kernel/apic/*, and also remove
the 'gen' prefix from those which had it.
Also move APIC related functionality: the IO-APIC driver,
the NMI and the IPI code.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
make it simpler, don't need have one extra struct.
v2: fix the sgi_uv build
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We are getting rid of subarchitecture support - move the hook files
to asm/. (These are now stale and should be replaced with more explicit
runtime mechanisms - but the transition is simpler this way.)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Linus Torvalds