The Lenovo Yoga 9 (14INTL5)'s ACPI _LID is bugged:
After hibernation the lid is initially reported as closed.
Once closing and then reopening the lid reports the lid as
open again. This leads to the conclusion that the initial
notification of the lid is missing but subsequent
notifications are correct.
In order fo the Linux LID code to handle this device properly
the lid_init_state must be set to ACPI_BUTTON_LID_INIT_OPEN.
Signed-off-by: Ulrich Huber <ulrich@huberulrich.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix some coding style issues reported by checkpatch.pl, including the
following types:
WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line
ERROR: code indent should use tabs where possible
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Replace the ACPI_DEBUG_PRINT() instance in button.c with an
acpi_handle_debug() call, drop the _COMPONENT and ACPI_MODULE_NAME()
definitions that are not used any more, drop the no longer needed
ACPI_BUTTON_COMPONENT definition from the headers and update the
documentation accordingly.
While at it, replace the direct printk() invocations with pr_info()
(that changes the excessive log level for some of them too) and drop
the unneeded PREFIX sybmbol definition from battery.c.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The Medion Akoya E2228T's ACPI _LID implementation is quite broken,
it has the same issues as the one from the Medion Akoya E2215T:
1. For notifications it uses an ActiveLow Edge GpioInt, rather then
an ActiveBoth one, meaning that the device is only notified when the
lid is closed, not when it is opened.
2. Matching with this its _LID method simply always returns 0 (closed)
In order for the Linux LID code to work properly with this implementation,
the lid_init_state selection needs to be set to ACPI_BUTTON_LID_INIT_OPEN,
add a DMI quirk for this.
While working on this I also found out that the MD60### part of the model
number differs per country/batch while all of the E2215T and E2228T models
have this issue, so also remove the " MD60198" part from the E2215T quirk.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 78a5b53e9f ("Input: soc_button_array - work around DSDTs which
modify the irqflags") adds a workaround for DSDTs with a _LID method
which play tricks with the irqflags, assuming that the OS is using
an irq-type of IRQ_TYPE_LEVEL_LOW.
Now that this workaround is in place, we no longer need to disable the
lid functionality on the Acer SW5-012.
Fixes: 78a5b53e9f ("Input: soc_button_array - work around DSDTs which modify the irqflags")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The original intent of 84d3f6b764 was to delay evaluating lid state until
all drivers have been loaded, with input device being opened from userspace
serving as a signal for this condition. Let's ensure that state updates
happen even if userspace closed (or in the future inhibited) input device.
Note that if we go through suspend/resume cycle we assume the system has
been fully initialized even if LID input device has not been opened yet.
This has a side-effect of fixing access to input->users outside of
input->mutex protections by the way of eliminating said accesses and using
driver private flag.
Fixes: 84d3f6b764 ("ACPI / button: Delay acpi_lid_initialize_state() until first user space open")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Cc: 4.15+ <stable@vger.kernel.org> # 4.15+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Those were used to create files in /proc/acpi long ago
and were missed when that code was deleted.
Signed-off-by: Pascal Terjan <pterjan@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 17e5888e4e ("x86: Select HARDIRQS_SW_RESEND on x86") fixes
the edge-triggered embedded-controller (WC) IRQ not being replayed after
resume when woken by opening the lid, which gets signaled by the EC.
This means that the lid_init_state=ACPI_BUTTON_LID_INIT_OPEN quirk for
the Asus T200TA is no longer necessary, the lid now works properly
without it, so drop the quirk.
Fixes: 17e5888e4e ("x86: Select HARDIRQS_SW_RESEND on x86")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This makes it possible to use ACPI_BUTTON_HID_POWER in another driver.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Running evemu-record on the lid switch event shows that the lid reports
the first "close" but then never reports an "open". This causes systemd
to continuously re-suspend the laptop every 30s. Resetting the _LID to
"open" fixes the issue.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Acer Switch 10 SW5-032 _LID method is quite broken, it looks like this:
Method (_LID, 0, NotSerialized) // _LID: Lid Status
{
If ((STAS & One))
{
Local0 = One
PBCG |= 0x05000000
HMCG |= 0x05000000
}
Else
{
Local0 = Zero
PBCG &= 0xF0FFFFFF
HMCG &= 0xF0FFFFFF
}
^^PCI0.GFX0.CLID = Local0
Return (Local0)
}
The problem here is the accesses to the PBCG and HMCG, these are the
pinconf0 registers for the power, resp. the home button GPIO,
e.g. PBCG is declared as:
OperationRegion (PWBT, SystemMemory, 0xFED0E080, 0x10)
Field (PWBT, DWordAcc, NoLock, Preserve)
{
PBCG, 32,
PBV1, 32,
PBSA, 32,
PBV2, 32
}
Where 0xFED0E000 is the base address of the GPO2 device and 0x80 is
the offset for the pin used for the powerbutton.
The problem here is this line in _LID:
PBCG |= 0x05000000
This changes the trigger flags of the GPIO, changing when it generates
interrupts. Note it does not clear the original flags. Linux uses an
edge triggered interrupt on both positive and negative edges. This |=
adds the BYT_TRIG_LVL flag to this, so now it is turned into a level
interrupt which fires both when low and high, iow it simply always
fires leading to an interrupt storm, the tablet immediately waking up
from suspend again, etc.
There is nothing we can do to fix this, except for a DSDT override,
which the user needs to do manually. The only thing we can do is
never call _LID, which requires disabling the lid-switch functionality
altogether.
This commit adds a quirk for this, as no lid-switch function is better
then the interrupt storm. A user manually applying a DSDT override can
also override the quirk on the kernel cmdline.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There are no users of the acpi_lid_notifier_[un]register functions,
so lets remove them.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Asus T200TA lid has some weird behavior where _LID keeps reporting
closed after every second openening of the lid. Causing immediate
re-suspend after opening every other open.
I've looked at the AML code but it involves talking to the EC and we
have no idea what the EC is doing. Setting lid_init_state to
ACPI_BUTTON_LID_INIT_OPEN fixes the unwanted behavior, so this commit
adds a DMI based quirk to use ACPI_BUTTON_LID_INIT_OPEN on the T200TA.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Medion Akoya E2215T's ACPI _LID implementation is quite broken:
1. For notifications it uses an ActiveLow Edge GpioInt, rather then
an ActiveBoth one, meaning that the device is only notified when the
lid is closed, not when it is opened.
2. Matching with this its _LID method simply always returns 0 (closed)
In order for the Linux LID code to work properly with this implementation,
the lid_init_state selection needs to be set to ACPI_BUTTON_LID_INIT_OPEN.
This commit adds a DMI quirk for this.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 3540c32a9a ("ACPI / button: Add quirks for initial lid state
notification") added 3 different modes to the LID handling code to deal
with various buggy implementations.
Until now users which need one of the 2 non-default modes to get their
HW to work have to pass a kernel commandline option for this.
E.g. https://bugzilla.kernel.org/show_bug.cgi?id=106151 was closed with a
note that the user has to add "button.lid_init_state=open" to the kernel
commandline to get the LID code to not cause undesirable suspends on his
Samsung N210 Plus.
This commit modifies the existing lid_blacklst DMI table so that it can
be used not only to completely disable the LID code on devices where
the ACPI tables are broken beyond repair, but also to select one of the 2
non default LID handling modes on devices where this is necessary.
This will allow us to add quirks to make the LID work OOTB on broken
devices. Getting this working OOTB is esp. important because the typical
breakage is false LID closed reporting, causing undesirable suspends which
basically make the system unusable.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add a new "disabled" value for the lid_init_state module option, which can
be used to disable LID support on devices where it is completely broken.
Sometimes devices seem to spontaneously suspend and the cause for this is
not clear. The LID switch is known to be one possible cause for this,
this commit allows easily disabling the LID switch for testing if it
is the cause.
For example some devices which do not even have a lid, still have a LID
device in their ACPI tables, pointing to a floating GPIO.
This is not really related to the initial LID state, but re-using the
existing option keeps things simple and it will make it much easier to
add DMI quirks which can either disable the LID completely or set another
non-default lid_init_state value, both of which are necessary on some
devices.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Replace the weird strncmp() calls in param_set_lid_init_state(),
which look to me like they will also accept things like "opennnn"
to use sysfs_match_string instead.
Also rewrite param_get_lid_init_state() using the new lid_init_state_str
array. Instead of doing a straightforward one line replacement, e.g. :
return sprintf(buffer, lid_init_state_str[lid_init_state]);
print all possible values, putting [] around the selected value, so
that users can easily find out what the possible values are.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Based on 3 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [kishon] [vijay] [abraham]
[i] [kishon]@[ti] [com] this program is distributed in the hope that
it will be useful but without any warranty without even the implied
warranty of merchantability or fitness for a particular purpose see
the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [graeme] [gregory]
[gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i]
[kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema]
[hk] [hemahk]@[ti] [com] this program is distributed in the hope
that it will be useful but without any warranty without even the
implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1105 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With commit dfa46c50f6 ("ACPI / button: Fix an issue in
button.lid_init_state=ignore mode"), the lid device is considered to be
not compliant to SW_LID if the Lid state is unchanged when updating it.
This is not wrong, but we overlooked the resume case, where Lid state is
updated unconditionally in the button driver .resume() callback. And this
results in warning message "ACPI: button: The lid device is not compliant
to SW_LID." after resume, if the machine is suspended with Lid opened and
then resumed with Lid opened.
Fix this by flushing the cached lid state before updating the Lid device
in .resume() callback.
Fixes: dfa46c50f6 ("ACPI / button: Fix an issue in button.lid_init_state=ignore mode")
Reported-and-tested-by: Zhao Lijian <lijian.zhao@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix a build warning in the ACPI button driver when CONFIG_PROC_FS
is not enabled by marking the unused function as __maybe_unused.
../drivers/acpi/button.c:252:12: warning: 'acpi_button_state_seq_show' defined but not used [-Wunused-function]
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Because acpi_lid_initialize_state() is called on every system
resume and it triggers acpi_lid_notify_state() which invokes
acpi_pm_wakeup_event() for the lid device, the lid's wakeup count is
incremented even if the lid was not the source of the event that woke up
the system. That behavior confuses user space deamons using
wakeup_count to identify the potential system wakeup source. To avoid
the confusion, only trigger acpi_pm_wakeup_event() in the
acpi_button_notify() path and don't do that in the
acpi_lid_initialize_state() path.
Signed-off-by: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Variants of proc_create{,_data} that directly take a seq_file show
callback and drastically reduces the boilerplate code in the callers.
All trivial callers converted over.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Modules such as nouveau.ko and i915.ko have a link time dependency on
acpi_lid_open(), and due to its use of acpi_bus_register_driver(),
the button.ko module that provides it is only loadable when booted in
ACPI mode. However, the ACPI button driver can be built into the core
kernel as well, in which case the dependency can always be satisfied,
and the dependent modules can be loaded regardless of whether the
system was booted in ACPI mode or not.
So let's fix this asymmetry by making the ACPI button driver loadable
as a module even if not booted in ACPI mode, so it can provide the
acpi_lid_open() symbol in the same way as when built into the kernel.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[ rjw: Minor adjustments of comments, whitespace and names. ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The GP-electronic T701 tablet does not have a LID switch, but it
does define a LID device in its DSDT. The _LID method points to
the "\\_SB.GPO2" pin 0x18 GPIO with a pull setting of "PullDefault",
which leaves the pin floating.
This causes the ACPI button driver to cause spurious LID closed events,
causing the device to suspend while the user is using it. There is
nothing the ACPI button driver (or the gpio code) can do to fix this,
so the only solution is to add a DMI based blacklist and ignore the LID
device on these tablets.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
I've been debugging some spurious suspend issues on various devices,
at least on some devices these spurious suspends are caused by surious
LID closed events being send to userspace.
Running e.g. evemu-record after noticing a spurious suspend is too late
to detect that a LID closed event it the (probable) cause of this.
This commit adds an acpi_handle_debug call to help debugging this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Summary of modules changes for the 4.15 merge window:
- Treewide module_param_call() cleanup, fix up set/get function
prototype mismatches, from Kees Cook
- Minor code cleanups
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=c8vb
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
"Summary of modules changes for the 4.15 merge window:
- treewide module_param_call() cleanup, fix up set/get function
prototype mismatches, from Kees Cook
- minor code cleanups"
* tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: Do not paper over type mismatches in module_param_call()
treewide: Fix function prototypes for module_param_call()
module: Prepare to convert all module_param_call() prototypes
kernel/module: Delete an error message for a failed memory allocation in add_module_usage()
ACPI _LID methods may depend on OpRegions and do not always handle
handlers for those OpRegions not being present properly e.g. :
Method (_LID, 0, NotSerialized) // _LID: Lid Status
{
If ((^^I2C5.PMI1.AVBL == One) && (^^GPO2.AVBL == One))
{
Return (^^GPO2.LPOL) /* \_SB_.GPO2.LPOL */
}
}
Note the missing Return (1) when either of the OpRegions is not available,
this causes (in this case) a report of the lid-switch being closed,
which causes userspace to do an immediate suspend at boot.
This commit delays getting the initial state and thus calling _LID for
the first time until userspace opens the /dev/input/event# node. This
ensures that all drivers will have had a chance to load and registerer
their OpRegions before the first _LID call, fixing this issue.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Several function prototypes for the set/get functions defined by
module_param_call() have a slightly wrong argument types. This fixes
those in an effort to clean up the calls when running under type-enforced
compiler instrumentation for CFI. This is the result of running the
following semantic patch:
@match_module_param_call_function@
declarer name module_param_call;
identifier _name, _set_func, _get_func;
expression _arg, _mode;
@@
module_param_call(_name, _set_func, _get_func, _arg, _mode);
@fix_set_prototype
depends on match_module_param_call_function@
identifier match_module_param_call_function._set_func;
identifier _val, _param;
type _val_type, _param_type;
@@
int _set_func(
-_val_type _val
+const char * _val
,
-_param_type _param
+const struct kernel_param * _param
) { ... }
@fix_get_prototype
depends on match_module_param_call_function@
identifier match_module_param_call_function._get_func;
identifier _val, _param;
type _val_type, _param_type;
@@
int _get_func(
-_val_type _val
+char * _val
,
-_param_type _param
+const struct kernel_param * _param
) { ... }
Two additional by-hand changes are included for places where the above
Coccinelle script didn't notice them:
drivers/platform/x86/thinkpad_acpi.c
fs/lockd/svc.c
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
- Update the ACPICA code in the kernel to upstream revision
revision 20170531 (which covers all of the new material from
ACPI 6.2) including:
* Support for the PinFunction(), PinConfig(), PinGroup(),
PinGroupFunction(), and PinGroupConfig() resource descriptors
(Mika Westerberg).
* Support for new subtables in HEST and SRAT, new notify value
for HEST, header support for TPM2 table changes, and BGRT
Status field update (Bob Moore).
* Support for new PCCT subtables (David Box).
* Support for _LSI, _LSR, _LSW, and _HMA as predefined methods
(Erik Schmauss).
* Support for the new WSMT, HMAT, and PPTT tables (Lv Zheng).
* New UUID values for Processor Properties (Bob Moore).
* New notify values for memory attributes and graceful shutdown
(Bob Moore).
* Fix related to the PCAT_COMPAT MADT flag (Janosch Hildebrand).
* Resource to AML conversion fix for resources containing GPIOs
(Mika Westerberg).
* Disassembler-related updates (Bob Moore, David Box, Erik
Schmauss).
* Assorted fixes and cleanups (Bob Moore, Erik Schmauss, Lv Zheng,
Cao Jin).
- Modify ACPICA to always use designated initializers for function
pointer structures to make the structure layout randomization GCC
plugin work with it (Kees Cook).
- Update the tables configfs interface to unload SSDTs on configfs
entry removal (Jan Kiszka).
- Add support for the GPI1 regulator to the xpower PMIC Operation
Region handler (Hans de Goede).
- Fix ACPI EC issues related to conflicting EC definitions in the
ECDT and in the ACPI namespace (Lv Zheng, Carlo Caione, Chris
Chiu).
- Fix an interrupt storm issue in the EC driver and make its debug
output work with dynamic debug as expected (Lv Zheng).
- Add ACPI backlight quirk for Dell Precision 7510 (Shih-Yuan Lee).
- Fix whitespace in pr_fmt() to align log entries properly in some
places in the ACPI subsystem (Vincent Legoll).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=ImFw
-----END PGP SIGNATURE-----
Merge tag 'acpi-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These mostly update the ACPICA code in the kernel to upstream revision
20170531 which covers all of the new material from ACPI 6.2, including
new tables (WSMT, HMAT, PPTT), new subtables and definition changes
for some existing tables (BGRT, HEST, SRAT, TPM2, PCCT), new resource
descriptor macros for pin control, support for new predefined methods
(_LSI, _LSR, _LSW, _HMA), fixes and cleanups.
On top of that, an additional ACPICA change from Kees (which also is
upstream already) switches all of the definitions of function pointer
structures in ACPICA to use designated initializers so as to make the
structure layout randomization GCC plugin work with it.
The rest is a few fixes and cleanups in the EC driver, an xpower PMIC
driver update, a new backlight blacklist entry, and update of the
tables configfs interface and a messages formatting cleanup.
Specifics:
- Update the ACPICA code in the kernel to upstream revision revision
20170531 (which covers all of the new material from ACPI 6.2)
including:
* Support for the PinFunction(), PinConfig(), PinGroup(),
PinGroupFunction(), and PinGroupConfig() resource descriptors
(Mika Westerberg).
* Support for new subtables in HEST and SRAT, new notify value for
HEST, header support for TPM2 table changes, and BGRT Status
field update (Bob Moore).
* Support for new PCCT subtables (David Box).
* Support for _LSI, _LSR, _LSW, and _HMA as predefined methods
(Erik Schmauss).
* Support for the new WSMT, HMAT, and PPTT tables (Lv Zheng).
* New UUID values for Processor Properties (Bob Moore).
* New notify values for memory attributes and graceful shutdown
(Bob Moore).
* Fix related to the PCAT_COMPAT MADT flag (Janosch Hildebrand).
* Resource to AML conversion fix for resources containing GPIOs
(Mika Westerberg).
* Disassembler-related updates (Bob Moore, David Box, Erik
Schmauss).
* Assorted fixes and cleanups (Bob Moore, Erik Schmauss, Lv Zheng,
Cao Jin).
- Modify ACPICA to always use designated initializers for function
pointer structures to make the structure layout randomization GCC
plugin work with it (Kees Cook).
- Update the tables configfs interface to unload SSDTs on configfs
entry removal (Jan Kiszka).
- Add support for the GPI1 regulator to the xpower PMIC Operation
Region handler (Hans de Goede).
- Fix ACPI EC issues related to conflicting EC definitions in the
ECDT and in the ACPI namespace (Lv Zheng, Carlo Caione, Chris
Chiu).
- Fix an interrupt storm issue in the EC driver and make its debug
output work with dynamic debug as expected (Lv Zheng).
- Add ACPI backlight quirk for Dell Precision 7510 (Shih-Yuan Lee).
- Fix whitespace in pr_fmt() to align log entries properly in some
places in the ACPI subsystem (Vincent Legoll)"
* tag 'acpi-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (63 commits)
ACPI / EC: Add quirk for GL720VMK
ACPI / EC: Fix media keys not working problem on some Asus laptops
ACPI / EC: Add support to skip boot stage DSDT probe
ACPI / EC: Enhance boot EC sanity check
ACPI / video: Add quirks for the Dell Precision 7510
ACPI: EC: Fix EC command visibility for dynamic debug
ACPI: EC: Fix an EC event IRQ storming issue
ACPICA: Use designated initializers
ACPICA: Update version to 20170531
ACPICA: Update a couple of debug output messages
ACPICA: acpiexec: enhance local signal handler
ACPICA: Simplify output for the ACPI Debug Object
ACPICA: Unix application OSL: Correctly handle control-c (EINTR)
ACPICA: Improvements for debug output only
ACPICA: Disassembler: allow conflicting external declarations to be emitted.
ACPICA: Disassembler: add external op to namespace on first pass
ACPICA: Disassembler: prevent external op's from opening a new scope
ACPICA: Changed Gbl_disasm_flag to acpi_gbl_disasm_flag
ACPICA: Changing External to a named object
ACPICA: Update two error messages to emit control method name
...
The ACPI SCI (System Control Interrupt) is set up as a wakeup IRQ
during suspend-to-idle transitions and, consequently, any events
signaled through it wake up the system from that state. However,
on some systems some of the events signaled via the ACPI SCI while
suspended to idle should not cause the system to wake up. In fact,
quite often they should just be discarded.
Arguably, systems should not resume entirely on such events, but in
order to decide which events really should cause the system to resume
and which are spurious, it is necessary to resume up to the point
when ACPI SCIs are actually handled and processed, which is after
executing dpm_resume_noirq() in the system resume path.
For this reasons, add a loop around freeze_enter() in which the
platforms can process events signaled via multiplexed IRQ lines
like the ACPI SCI and add suspend-to-idle hooks that can be
used for this purpose to struct platform_freeze_ops.
In the ACPI case, the ->wake hook is used for checking if the SCI
has triggered while suspended and deferring the interrupt-induced
system wakeup until the events signaled through it are actually
processed sufficiently to decide whether or not the system should
resume. In turn, the ->sync hook allows all of the relevant event
queues to be flushed so as to prevent events from being missed due
to race conditions.
In addition to that, some ACPI code processing wakeup events needs
to be modified to use the "hard" version of wakeup triggers, so that
it will cause a system resume to happen on device-induced wakeup
events even if the "soft" mechanism to prevent the system from
suspending is not enabled. However, to preserve the existing
behavior with respect to suspend-to-RAM, this only is done in
the suspend-to-idle case and only if an SCI has occurred while
suspended.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Revert commit eed4d47efe (ACPI / sleep: Ignore spurious SCI wakeups
from suspend-to-idle) as it turned out to be premature and triggered
a number of different issues on various systems.
That includes, but is not limited to, premature suspend-to-RAM aborts
on Dell XPS 13 (9343) reported by Dominik.
The issue the commit in question attempted to address is real and
will need to be taken care of going forward, but evidently more work
is needed for this purpose.
Reported-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Revert commit 77e9a4aa9d (ACPI / button: Change default behavior to
lid_init_state=open) which changed the kernel's behavior on laptops
that boot with closed lids and expect the lid switch state to be
reported accurately by the kernel.
If you boot or resume your laptop with the lid closed on a docking
station while using an external monitor connected to it, both internal
and external displays will light on, while only the external should.
There is a design choice in gdm to only provide the greeter on the
internal display when lit on, so users only see a gray area on the
external monitor. Also, the cursor will not show up as it's by
default on the internal display too.
To "fix" that, users have to open the laptop once and close it once
again to sync the state of the switch with the hardware state.
Even if the "method" operation mode implementation can be buggy on
some platforms, the "open" choice is worse. It breaks docking
stations basically and there is no way to have a user-space hwdb to
fix that.
On the contrary, it's rather easy in user-space to have a hwdb
with the problematic platforms. Then, libinput (1.7.0+) can fix
the state of the lid switch for us: you need to set the udev
property LIBINPUT_ATTR_LID_SWITCH_RELIABILITY to 'write_open'.
When libinput detects internal keyboard events, it will overwrite the
state of the switch to open, making it reliable again. Given that
logind only checks the lid switch value after a timeout, we can
assume the user will use the internal keyboard before this timeout
expires.
For example, such a hwdb entry is:
libinput:name:*Lid Switch*:dmi:*svnMicrosoftCorporation:pnSurface3:*
LIBINPUT_ATTR_LID_SWITCH_RELIABILITY=write_open
Link: https://bugzilla.gnome.org/show_bug.cgi?id=782380
Cc: 4.11+ <stable@vger.kernel.org> # 4.11+
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This reverts commit ecb10b694b.
The only expected ACPI control method lid device's usage model is
1. Listen to the lid notification,
2. Evaluate _LID after being notified by BIOS,
3. Suspend the system (if users configure to do so) after seeing "close".
It's not ensured that BIOS will notify OS after boot/resume, and
it's not ensured that BIOS will always generate "open" event upon
opening the lid.
But there are 2 wrong usage models:
1. When the lid device is responsible for suspend/resume the system,
userspace requires to see "open" event to be paired with "close" after
the system is resumed, or it will suspend the system again.
2. When an external monitor connects to the laptop attached docks,
userspace requires to see "close" event after the system is resumed so
that it can determine whether the internal display should remain dark
and the external display should be lit on.
After we made default kernel behavior to be suitable for usage model 1,
users of usage model 2 start to report regressions for such behavior
change.
Reversion of button.lid_init_state=method doesn't actually reverts to old
default behavior as doing so can enter a regression loop, but facilitates
users to work the reported regressions around with
button.lid_init_state=method.
Fixes: ecb10b694b (ACPI / button: Remove lid_init_state=method mode)
Cc: 4.11+ <stable@vger.kernel.org> # 4.11+
Link: https://bugzilla.kernel.org/show_bug.cgi?id=195455
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1430259
Tested-by: Steffen Weber <steffen.weber@gmail.com>
Tested-by: Julian Wiedmann <julian.wiedmann@jwi.name>
Reported-by: Joachim Frieben <jfrieben@hotmail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The ACPI SCI (System Control Interrupt) is set up as a wakeup IRQ
during suspend-to-idle transitions and, consequently, any events
signaled through it wake up the system from that state. However,
on some systems some of the events signaled via the ACPI SCI while
suspended to idle should not cause the system to wake up. In fact,
quite often they should just be discarded.
Arguably, systems should not resume entirely on such events, but in
order to decide which events really should cause the system to resume
and which are spurious, it is necessary to resume up to the point
when ACPI SCIs are actually handled and processed, which is after
executing dpm_resume_noirq() in the system resume path.
For this reasons, add a loop around freeze_enter() in which the
platforms can process events signaled via multiplexed IRQ lines
like the ACPI SCI and add suspend-to-idle hooks that can be
used for this purpose to struct platform_freeze_ops.
In the ACPI case, the ->wake hook is used for checking if the SCI
has triggered while suspended and deferring the interrupt-induced
system wakeup until the events signaled through it are actually
processed sufficiently to decide whether or not the system should
resume. In turn, the ->sync hook allows all of the relevant event
queues to be flushed so as to prevent events from being missed due
to race conditions.
In addition to that, some ACPI code processing wakeup events needs
to be modified to use the "hard" version of wakeup triggers, so that
it will cause a system resume to happen on device-induced wakeup
events even if the "soft" mechanism to prevent the system from
suspending is not enabled (that also helps to catch device-induced
wakeup events occurring during suspend transitions in progress).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The mode is buggy, and lid_init__state=open is more useful than this
mode, so this patch makes it deprecated.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
More and more platforms need the button.lid_init_state=open quirk. This
patch sets it the default behavior.
If a platform doesn't send lid open event or lid open event is lost due to
the underlying system problems, then we can compare various combinations:
1. systemd/acpid is used to suspend system or not, systemd has a special
logic forcing open event after resuming;
2. _LID returns a cached value or not.
The result is as follows:
1. lid_init_state=method
1. cached
1. resumed by lid:
(x) event=close
(x) systemd=suspends again
(x) acpid=suspends again
(x) state=close
2. resumed by other:
(o) event=close
(x) systemd=suspends again
(x) acpid=suspends again
(o) state=close
2. non-cached
1. resumed by lid:
(o) event=open
(o) systemd=resumes
(o) acpid=resumes
(o) state=open
2. resumed by other:
(o) event=close
(x) systemd=suspends again
(x) acpid=suspends again
(o) state=close
2. lid_init_state=open
1. cached
1. resumed by lid:
(o) event=open
(o) systemd=resumes
(o) acpid=resumes
(x) state=close
2. resumed by other:
(x) event=open
(o) systemd=resumes
(o) acpid=resumes
(o) state=close
2. non-cached
1. resumed by lid:
(o) event=open
(o) systemd=resumes
(o) acpid=resumes
(o) state=open
2. resumed by other:
(x) event=open
(o) systemd=resumes
(o) acpid=resumes
(o) state=close
3. lid_init_state=ignore
1. cached
1. resumed by lid:
(o) event=none
(x) systemd=suspends again
(o) acpid=resumes
(x) state=close
2. resumed by other:
(o) event=none
(x) systemd=suspends again
(o) acpid=resumes
(o) state=close
2. non-cached
1. resumed by lid:
(o) event=none
(x) systemd=suspends again
(o) acpid=resumes
(o) state=open
2. resumed by other:
(o) event=none
(x) systemd=suspends again
(o) acpid=resumes
(o) state=close
As a conclusion:
1. With systemd changed, lid_init_state=ignore has only one problem and the
problem comes from an underlying issue, not userspace and kernel lid
handling.
2. Without systemd changed, lid_init_state=open can be the default
behavior as the pass ratio is not much worse than lid_init_state=ignore.
3. lid_init_state=method is buggy, we can have a separate patch to make it
deprectated.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=187271
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On most platforms, _LID returning value, lid open/close events are all
reliable, but there are exceptions. Some AML tables report wrong initial
lid state [1], and some of them never report lid open state [2].
The usage model on such buggy platforms is:
1. The initial lid state returned from _LID is not reliable;
2. The lid open event is not reliable;
3. The lid close event is always reliable, used by the platform firmware to
trigger OSPM power saving operations.
This usage model is not compliant to the Linux SW_LID model as the Linux
userspace is very strict to the reliability of the open events.
In order not to trigger issues on such buggy platforms, the ACPI button
driver currently implements a lid_init_state=open quirk to send additional
"open" event after resuming. However, this is still not sufficient because:
1. Some special usage models (e.x., the dark resume scenario) cannot be
supported by this mode.
2. If a "close" event is not used to trigger "suspend", then the subsequent
"close" events cannot be seen by the userspace.
So we need to stop sending the additional "open" event and switch the
driver to lid_init_state=ignore mode and make sure the platform triggered
events can be reliably delivered to the userspace. The userspace programs
then can be changed to not to be strict to the "open" events on such buggy
platforms.
Why will the subsequent "close" events be lost? This is because the input
layer automatically filters redundant events for switch events. Thus given
that the buggy AML tables do not guarantee paired "open"/"close" events,
the ACPI button driver currently is not able to guarantee that the platform
triggered reliable events can be always be seen by the userspace via
SW_LID.
This patch adds a mechanism to insert lid events as a compensation for the
platform triggered ones to form a complete event switches in order to make
sure that the platform triggered events can always be reliably delivered
to the userspace. This essentially guarantees that the platform triggered
reliable "close" events will always be relibly delivered to the userspace.
However this mechanism is not suitable for lid_init_state=open/method as
it should not send the complement switch event for the unreliable initial
lid state notification. 2 unreliable events can trigger unexpected
behavior. Thus this patch only implements this mechanism for
lid_init_state=ignore.
Known issues:
1. Possible alternative approach
This approach is based on the fact that Linux requires a switch event
type for LID events. Another approach is to use key event type to
implement ACPI lid events.
With SW event type, since ACPI button driver inserts wrong lid events,
there could be a potential issue that an "open" event issued from some
AML update methods could result in a wrong "close" event to be delivered
to the userspace. While using KEY event type, there is no such problem.
However there may not be such a kind of real case, and if there is such
a case, it is worked around in this patch as the complement switch event
is only generated for "close" event in order to deliver the reliable
"close" event to the userspace.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=89211 # [1]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=106151 # [1]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=106941 # [2]
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When we removed the procfs dir on error or if the driver is
unbound, the two variables acpi_lid_dir and acpi_button_dir
were not reset. On the next rebind, those static variables
were not null and we couldn't re-register the device again.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Linux userspace (systemd-logind) keeps on rechecking lid state when the
lid state is closed. If it failed to update the lid state to open after
boot/resume, the system suspending right after the boot/resume could be
resulted.
Graphics drivers also use the lid notifications to implment
MODESET_ON_LID_OPEN option.
Before the situation is improved from the userspace and from the graphics
driver, users can simply configure ACPI button driver to send initial
"open" lid state using button.lid_init_state=open to avoid such kind of
issues.
And our ultimate target should be making button.lid_init_state=ignore
the default behavior. This patch implements the 2 options and keep the
old behavior (button.lid_init_state=method).
Link: https://lkml.org/2016/3/7/460
Link: https://github.com/systemd/systemd/issues/2087
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(Correct a wrong macro usage.)
This patch simplies the code by merging some redundant code.
No functional changes.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The _LID control method's initial returning value is not reliable.
The _LID control method is described to return the "current" lid state.
However the word of "current" has ambiguity, many BIOSen return the lid
state upon the last lid notification instead of returning the lid state
upon the last _LID evaluation. There won't be difference when the _LID
control method is evaluated during the runtime, the problem is its initial
returning value. When the BIOSen implement this control method with cached
value, the initial returning value is likely not reliable. There are simply
so many examples retuning "close" as initial lid state (Link 1), sending
this state to the userspace causes suspending right after booting/resuming.
Since the lid state is implemented by the BIOSen, the kernel lid driver has
no idea how it can be correct, this patch stops sending the initial lid
state to the userspace to try to avoid sending the wrong lid state to the
userspace to trigger such kind of wrong suspending. This actually reverts
the following commit introduced for fixing a Novell bug:
Commit: 23de5d9ef2
Subject: ACPI: button: send initial lid state after add and resume
Link: https://bugzilla.kernel.org/show_bug.cgi?id=89211
Link: https://bugzilla.kernel.org/show_bug.cgi?id=106151
Link: https://bugzilla.kernel.org/show_bug.cgi?id=106941
Link: https://bugzilla.novell.com/show_bug.cgi?id=326814
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is no need to carry potentially outdated Free Software Foundation
mailing address in file headers since the COPYING file includes it.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
During system suspend mark ACPI buttons (other than the lid) as
"suspended" and if in that state, report wakeup events on button
events, but do not propagate those events up the stack.
This prevents systems from being turned off after a button-triggered
wakeup from the "freeze" sleep state.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=77611
Tested-on: Acer Aspire S5, Toshiba Portege R500
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 1696d9d (ACPI: Remove the old /proc/acpi/event interface)
removed ACPI Button event which originally was sent to userspace via
/proc/acpi/event. This caused ACPI shutdown regression on gentoo
in VirtualBox. Now ACPI events are sent to userspace via netlink,
so add ACPI Button event back via netlink routine.
References: https://bugzilla.kernel.org/show_bug.cgi?id=71721
Reported-and-tested-by: Richard Musil <richard.musil@gmail.com>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Cc: 3.11+ <stable@vger.kernel.org> # 3.11+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The ACPI button driver defines acpi_button_resume() when
CONFIG_PM_SLEEP is defined. This results in the following
compile error when CONFIG_PM_SLEEP is undefined:
drivers/acpi/button.c:85:8: error: ‘acpi_button_resume’ undeclared here (not in a function)
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Ulrich Huber