Introduce a new option to print counts after N milliseconds and update
'perf stat' documentation accordingly.
Show below is the output of the new option for perf stat.
$ perf stat --time 2000 -e cycles -a
Performance counter stats for 'system wide':
157,260,423 cycles
2.003060766 seconds time elapsed
We can print the count deltas after N milliseconds with this new
introduced option. This option is not supported with "-I" option.
In addition, according to Kangliang's patch(19afd10410), the
monitoring overhead for system-wide core event could be very high if the
interval-print parameter was below 100ms, and the limitation value is
10ms.
So the same warning will be displayed when the time is set between 10ms
to 100ms, and the minimal time is limited to 10ms. Users can make a
decision according to their spcific cases.
Committer notes:
This actually stops the workload after the specified time, then prints
the counts.
So I renamed the option to --timeout and updated the documentation to
state that it will not just print the counts after the specified time,
but will really stop the 'perf stat' session and print the counts.
The rename from 'time' to 'timeout' also fixes the build in systems
where 'time' is used by glibc and can't be used as a name of a variable,
such as centos:5 and centos:6.
Changes since v3:
- none.
Changes since v2:
- modify the time check in __run_perf_stat func to keep some consistency
with the workload case.
- add the warning when the time is set between 10ms to 100ms.
- add the pr_err when the time is set below 10ms.
Changes since v1:
- none.
Signed-off-by: yuzhoujian <yuzhoujian@didichuxing.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1517217923-8302-3-git-send-email-ufo19890607@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce a new option to print counts for fixed number of times and
update 'perf stat' documentation accordingly.
Show below is the output of the new option for perf stat.
$ perf stat -I 1000 --interval-count 2 -e cycles -a
# time counts unit events
1.002827089 93,884,870 cycles
2.004231506 56,573,446 cycles
We can just print the counts for several times with this newly
introduced option. The usage of it is a little like 'vmstat', and it
should be used together with "-I" option.
$ vmstat -n 1 2
procs ---------memory-------------- --swap- ----io-- -system-- ------cpu---
r b swpd free buff cache si so bi bo in cs us sy id wa st
0 0 0 78270544 547484 51732076 0 0 0 20 1 1 1 0 99 0 0
0 0 0 78270512 547484 51732080 0 0 0 16 477 1555 0 0 100 0 0
Changes since v3:
- merge interval_count check and times check to one line.
- fix the wrong indent in stat.h
- use stat_config.times instead of 'times' in cmd_stat function.
Changes since v2:
- none.
Changes since v1:
- change the name of the new option "times-print" to "interval-count".
- keep the new option interval specifically.
Signed-off-by: yuzhoujian <yuzhoujian@didichuxing.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1517217923-8302-2-git-send-email-ufo19890607@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add generic support for standalone metrics specified in JSON files to
perf stat. A metric is a formula that uses multiple events to compute a
higher level result (e.g. IPC).
Previously metrics were always tied to an event and automatically
enabled with that event. But now change it that we can have standalone
metrics. They are in the same JSON data structure as events, but don't
have an event name.
We also allow to organize the metrics in metric groups, which allows a
short cut to select several related metrics at once.
Add a new -M / --metrics option to perf stat that adds the metrics or
metric groups specified.
Add the core code to manage and parse the metric groups. They are
collected from the JSON data structures into a separate rblist. When
computing shadow values look for metrics in that list. Then they are
computed using the existing saved values infrastructure in stat-shadow.c
The actual JSON metrics are in a separate pull request.
% perf stat -M Summary --metric-only -a sleep 1
Performance counter stats for 'system wide':
Instructions CLKS CPU_Utilization GFLOPs SMT_2T_Utilization Kernel_Utilization
317614222.0 1392930775.0 0.0 0.0 0.2 0.1
1.001497549 seconds time elapsed
% perf stat -M GFLOPs flops
Performance counter stats for 'flops':
3,999,541,471 fp_comp_ops_exe.sse_scalar_single # 1.2 GFLOPs (66.65%)
14 fp_comp_ops_exe.sse_scalar_double (66.65%)
0 fp_comp_ops_exe.sse_packed_double (66.67%)
0 fp_comp_ops_exe.sse_packed_single (66.70%)
0 simd_fp_256.packed_double (66.70%)
0 simd_fp_256.packed_single (66.67%)
0 duration_time
3.238372845 seconds time elapsed
v2: Add missing header file
v3: Move find_map to pmu.c
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170831194036.30146-7-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As defined in tools/perf/util/pmu.c, the EVENT_SOURCE_DEVICE_PATH is
/sys/bus/event_source/devices/ (no traling 's' in event_source)
This patch corrects the path in the perf stat documentation
Signed-off-by: Jack Henschel <jackdev@mailbox.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jack Henschel <jackdev@mailbox.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: trivial@kernel.org
Link: http://lkml.kernel.org/r/20170824132022.10934-1-jackdev@mailbox.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Implementing a new --smi-cost mode in perf stat to measure SMI cost.
During the measurement, the /sys/device/cpu/freeze_on_smi will be set.
The measurement can be done with one counter (unhalted core cycles), and
two free running MSR counters (IA32_APERF and SMI_COUNT).
In practice, the percentages of SMI core cycles should be more useful
than absolute value. So the output will be the percentage of SMI core
cycles and SMI#. metric_only will be set by default.
SMI cycles% = (aperf - unhalted core cycles) / aperf
Here is an example output.
Performance counter stats for 'sudo echo ':
SMI cycles% SMI#
0.1% 1
0.010858678 seconds time elapsed
Users who wants to get the actual value can apply additional
--no-metric-only.
Signed-off-by: Kan Liang <Kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Elliott <elliott@hpe.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1495825538-5230-3-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The uncore PMU has a lot of duplicated PMUs for different subsystems.
When expanding an uncore alias we usually end up with a large
number of identically named aliases, which makes perf stat
output difficult to read.
Automatically sum them up in perf stat, unless --no-merge is specified.
This can be default because only the uncores generally have duplicated
aliases. Other PMUs have unique names.
Before:
% perf stat --no-merge -a -e unc_c_llc_lookup.any sleep 1
Performance counter stats for 'system wide':
694,976 Bytes unc_c_llc_lookup.any
706,304 Bytes unc_c_llc_lookup.any
956,608 Bytes unc_c_llc_lookup.any
782,720 Bytes unc_c_llc_lookup.any
605,696 Bytes unc_c_llc_lookup.any
442,816 Bytes unc_c_llc_lookup.any
659,328 Bytes unc_c_llc_lookup.any
509,312 Bytes unc_c_llc_lookup.any
263,936 Bytes unc_c_llc_lookup.any
592,448 Bytes unc_c_llc_lookup.any
672,448 Bytes unc_c_llc_lookup.any
608,640 Bytes unc_c_llc_lookup.any
641,024 Bytes unc_c_llc_lookup.any
856,896 Bytes unc_c_llc_lookup.any
808,832 Bytes unc_c_llc_lookup.any
684,864 Bytes unc_c_llc_lookup.any
710,464 Bytes unc_c_llc_lookup.any
538,304 Bytes unc_c_llc_lookup.any
1.002577660 seconds time elapsed
After:
% perf stat -a -e unc_c_llc_lookup.any sleep 1
Performance counter stats for 'system wide':
2,685,120 Bytes unc_c_llc_lookup.any
1.002648032 seconds time elapsed
v2: Split collect_aliases. Rename alias flag.
v3: Make sure unsupported/not counted is always printed.
v4: Factor out callback change into separate patch.
v5: Move check for bad results here
Move merged check into collect_data
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170320201711.14142-3-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Description of --no-aggr in perf-stat man page is outdated. --no-aggr
can also be used while profiling specific set of cpus. For ex,
$ perf stat -e cycles,instructions -C 1-2 --no-aggr -- sleep 1
Performance counter stats for 'CPU(s) 1-2':
CPU1 5,94,92,795 cycles
CPU2 2,69,72,403 cycles
CPU1 2,02,08,327 instructions # 0.34 insn per cycle
CPU2 73,17,123 instructions # 0.12 insn per cycle
1.000989132 seconds time elapsed
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1490013438-5713-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Boris asked for default -a option in case we monitor only uncore events.
While implementing that I thought it might be actually useful to make it
overall default.
Running 'perf stat' will now collect system wide data.
Committer note:
Testing it:
# perf stat
^C
Performance counter stats for 'system wide':
3571.559178 cpu-clock (msec) # 4.000 CPUs utilized
3,346 context-switches # 0.937 K/sec
277 cpu-migrations # 0.078 K/sec
57,271 page-faults # 0.016 M/sec
4,535,633,835 cycles # 1.270 GHz
6,389,736,516 instructions # 1.41 insn per cycle
1,541,293,875 branches # 431.547 M/sec
14,526,396 branch-misses # 0.94% of all branches
0.892950118 seconds time elapsed
#
Requested-and-Acked-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170217170034.GB15389@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add basic plumbing for TopDown in perf stat
TopDown is intended to replace the frontend cycles idle/ backend cycles
idle metrics in standard perf stat output. These metrics are not
reliable in many workloads, due to out of order effects.
This implements a new --topdown mode in perf stat (similar to
--transaction) that measures the pipe line bottlenecks using
standardized formulas. The measurement can be all done with 5 counters
(one fixed counter)
The result are four metrics:
FrontendBound, BackendBound, BadSpeculation, Retiring
that describe the CPU pipeline behavior on a high level.
The full top down methology has many hierarchical metrics. This
implementation only supports level 1 which can be collected without
multiplexing. A full implementation of top down on top of perf is
available in pmu-tools toplev. (http://github.com/andikleen/pmu-tools)
The current version works on Intel Core CPUs starting with Sandy Bridge,
and Atom CPUs starting with Silvermont. In principle the generic
metrics should be also implementable on other out of order CPUs.
TopDown level 1 uses a set of abstracted metrics which are generic to
out of order CPU cores (although some CPUs may not implement all of
them):
topdown-total-slots Available slots in the pipeline
topdown-slots-issued Slots issued into the pipeline
topdown-slots-retired Slots successfully retired
topdown-fetch-bubbles Pipeline gaps in the frontend
topdown-recovery-bubbles Pipeline gaps during recovery
from misspeculation
These metrics then allow to compute four useful metrics:
FrontendBound, BackendBound, Retiring, BadSpeculation.
Add a new --topdown options to enable events. When --topdown is
specified set up events for all topdown events supported by the kernel.
Add topdown-* as a special case to the event parser, as is needed for
all events containing -.
The actual code to compute the metrics is in follow-on patches.
v2: Use standard sysctl read function.
v3: Move x86 specific code to arch/
v4: Enable --metric-only implicitly for topdown.
v5: Add --single-thread option to not force per core mode
v6: Fix output order of topdown metrics
v7: Allow combining with -d
v8: Remove --single-thread again
v9: Rename functions, adding arch_ and topdown_.
v10: Expand man page and describe TopDown better
Paste intro into commit description.
Print error when malloc fails.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1464119559-17203-1-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add metric only support for -A too. This requires a new print function
that prints the metrics in the right order.
v2: Fix manpage
v3: Simplify nrcpus computation
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1457049458-28956-7-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a new mode to only print metrics. Sometimes we don't care about the
raw values, just want the computed metrics. This allows more compact
printing, so with -I each sample is only a single line. This also
allows easier plotting and processing with other tools.
The main target is with using --topdown, but it also works with -T and
standard perf stat. A few metrics are not supported.
To avoiding having to hardcode all the metrics in the code it uses a two
pass approach: first compute dummy metrics and only print the headers in
the print_metric callback. Then use the callback to print the actual
values.
There are some additional changes in the stat printout code to handle
all metrics being on a single line.
One issue is that the column code doesn't know in advance what events
are not supported by the CPU, and it would be hard to find out as this
could change based on dynamic conditions. That causes empty columns in
some cases.
The output can be fairly wide, often you may need more than 80 columns.
Example:
% perf stat -a -I 1000 --metric-only
1.001452803 frontend cycles idle insn per cycle stalled cycles per insn branch-misses of all branches
1.001452803 158.91% 0.66 2.39 2.92%
2.002192321 180.63% 0.76 2.08 2.96%
3.003088282 150.59% 0.62 2.57 2.84%
4.004369835 196.20% 0.98 1.62 3.79%
5.005227314 231.98% 0.84 1.90 4.71%
v2: Lots of updates.
v3: Use slightly narrower columns
v4: Add comment
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1457049458-28956-6-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With all the recently added fields in the perf stat CSV output we should
finally document them in the man page. Do this here.
v2: Fix fields in documentation (Jiri)
v3: fix order of fields again (Jiri)
v4: Change order again.
v5: Document more fields (Jiri)
v6: Move time stamp first
v7: More fixes (Jiri)
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1457049458-28956-5-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I'm surprised this remained undocumented since at least 2011. And it is
actually a very useful switch, as Steve and I came to realize recently.
Add the text from
2cba3ffb9a ("perf stat: Add -d -d and -d -d -d options to show more CPU events")
which added the incrementing aspect to -d.
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Davidlohr Bueso <dbueso@suse.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mel Gorman <mgorman@suse.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 2cba3ffb9a ("perf stat: Add -d -d and -d -d -d options to show more CPU events")
Link: http://lkml.kernel.org/r/1457347294-32546-1-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Allowing to override record aggr_mode. It's possible to use perf stat
like:
$ perf stat report -A
$ perf stat report --per-core
$ perf stat report --per-socket
To customize the recorded aggregate mode regardless what was used during
the stat record command.
Reported-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1446734469-11352-19-git-send-email-jolsa@kernel.org
[ Renamed 'stat' parameter to 'st' to fix 'already defined' build error with older distros (e.g. RHEL6.7) ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding 'perf stat report' command support. ATM it only processes attr
events and display nothing.
Reported-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1446734469-11352-12-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add 'perf stat record' command support. It creates simple (header only)
perf.data file ATM.
The record command could be specified anywhere among stat options. All
stat command options are valid for stat record command with '-o' option
exception. If specified for record command it denotes the perf data file
name.
Committer note:
Set sample_type to PERF_SAMPLE_IDENTIFIER, which should be harmless
while avoiding that older tools show confusing messages, for instance,
with sample_type = 0, we get:
$ perf stat record usleep 1
Performance counter stats for 'usleep 1':
0.630237 task-clock (msec) # 0.528 CPUs utilized
1 context-switches # 0.002 M/sec
0 cpu-migrations # 0.000 K/sec
52 page-faults # 0.083 M/sec
978,312 cycles # 1.552 GHz
671,931 stalled-cycles-frontend # 68.68% frontend cycles idle
<not supported> stalled-cycles-backend
646,379 instructions # 0.66 insns per cycle
# 1.04 stalled cycles per insn
131,046 branches # 207.931 M/sec
7,073 branch-misses # 5.40% of all branches
0.001193240 seconds time elapsed
$ oldperf evlist
WARNING: The perf.data file's data size field is 0 which is unexpected.
Was the 'perf record' command properly terminated?
non matching sample_type
$
While with sample_type set to PERF_SAMPLE_IDENTIFIER, after we re-run 'perf
stat record usleep' we get:
$ oldperf evlist
WARNING: The perf.data file's data size field is 0 which is unexpected.
Was the 'perf record' command properly terminated?
task-clock
context-switches
cpu-migrations
page-faults
cycles
stalled-cycles-frontend
stalled-cycles-backend
instructions
branches
branch-misses
$
Which at least shows the names of the events in the perf.data file.
Additionally, such files, when passed to 'perf report' will produce:
$ oldperf report --stdio
WARNING: The perf.data file's data size field is 0 which is unexpected.
Was the 'perf record' command properly terminated?
Warning:
Kernel address maps (/proc/{kallsyms,modules}) were restricted.
Check /proc/sys/kernel/kptr_restrict before running 'perf record'.
As no suitable kallsyms nor vmlinux was found, kernel samples
can't be resolved.
Samples in kernel modules can't be resolved as well.
Error:
The perf.data file has no samples!
# To display the perf.data header info, please use --header/--header-only options.
#
$
Which is confusing and can be solved by just adding the kernel mmap record,
which will also remove that warning about the data size field being equal to
zero, after generating the mmap record:
$ perf stat record usleep 1
Performance counter stats for 'usleep 1':
0.600796 task-clock (msec) # 0.478 CPUs utilized
1 context-switches # 0.002 M/sec
0 cpu-migrations # 0.000 K/sec
54 page-faults # 0.090 M/sec
886,844 cycles # 1.476 GHz
582,169 stalled-cycles-frontend # 65.65% frontend cycles idle
<not supported> stalled-cycles-backend
638,344 instructions # 0.72 insns per cycle
# 0.91 stalled cycles per insn
130,204 branches # 216.719 M/sec
7,500 branch-misses # 5.76% of all branches
0.001255897 seconds time elapsed
$ oldperf evlist
task-clock
context-switches
cpu-migrations
page-faults
cycles
stalled-cycles-frontend
stalled-cycles-backend
instructions
branches
branch-misses
$ oldperf report --stdio
Error:
The perf.data file has no samples!
# To display the perf.data header info, please use --header/--header-only options.
#
[acme@zoo linux]$
No warnings, sensible output about what are the events in the perf.data file and also
a "file has no samples" message, which indeed it doesn't.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: htp://lkml.kernel.org/r/1446734469-11352-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --interval-print parameter was limited to 100ms. However, for
example, 10ms is required to do sophisticated bandwidth analysis using
uncore events.
The test shows that the overhead of the system-wide uncore monitoring
with 10ms interval is only ~2%. So this patch reduces the minimal
interval-print allowd to 10ms.
But 10ms may not work well for all cases. For example, when the
cpus/threads number is very large, for system-wide core event monitoring
the overhead could be high.
To handle this issue, a warning will be displayed when the
interval-print is set between 10ms to 100ms. So users can make a
decision according to their specific cases.
# perf stat -e uncore_imc_1/cas_count_read/ -a --interval-print 10 -- sleep 1
print interval < 100ms. The overhead percentage could be high in some
cases. Please proceed with caution.
# time counts unit events
0.010200451 0.10 MiB uncore_imc_1/cas_count_read/
0.020475117 0.02 MiB uncore_imc_1/cas_count_read/
0.030692800 0.01 MiB uncore_imc_1/cas_count_read/
0.040948161 0.02 MiB uncore_imc_1/cas_count_read/
0.051159564 0.00 MiB uncore_imc_1/cas_count_read/
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1443776674-42511-1-git-send-email-kan.liang@intel.com
[ Added warning about overhead when using sub 100ms intervals to the man page ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently all the -p option PID arguments tasks values get aggregated
and printed as single values.
Adding --per-tasks option to print values per task.
$ perf stat -e cycles,instructions --per-thread -p 30190,30242
^C
Performance counter stats for process id '30190,30242':
cat-30190 0 cycles
yes-30242 3,842,525,421 cycles
cat-30190 0 instructions
yes-30242 10,370,817,010 instructions
1.143155657 seconds time elapsed
Also works under interval mode:
$ perf stat -e cycles,instructions --per-thread -p 30190,30242 -I 1000
# time comm-pid counts unit events
1.000073435 cat-30190 89,058 cycles
1.000073435 yes-30242 3,360,786,902 cycles (100.00%)
1.000073435 cat-30190 14,066 instructions
1.000073435 yes-30242 9,069,937,462 instructions
2.000204830 cat-30190 0 cycles
2.000204830 yes-30242 3,351,667,626 cycles
2.000204830 cat-30190 0 instructions
2.000204830 yes-30242 9,045,796,885 instructions
^C 2.771286639 cat-30190 0 cycles
2.771286639 yes-30242 2,593,884,166 cycles
2.771286639 cat-30190 0 instructions
2.771286639 yes-30242 7,001,171,191 instructions
It works only with -t and -p options, otherwise following error is
printed:
$ perf stat -e cycles --per-thread -I 1000 ls
The --per-thread option is only available when monitoring via -p -t options.
-p, --pid <pid> stat events on existing process id
-t, --tid <tid> stat events on existing thread id
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1435310967-14570-23-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --delay option was documented as --initial-delay in the manpage. Fix this.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1389132847-31982-1-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support to perf stat to print the basic transactional execution statistics:
Total cycles, Cycles in Transaction, Cycles in aborted transsactions
using the in_tx and in_tx_checkpoint qualifiers.
Transaction Starts and Elision Starts, to compute the average transaction
length.
This is a reasonable overview over the success of the transactions.
Also support architectures that have a transaction aborted cycles
counter like POWER8. Since that is awkward to handle in the kernel
abstract handle both cases here.
Enable with a new --transaction / -T option.
This requires measuring these events in a group, since they depend on each
other.
This is implemented by using TM sysfs events exported by the kernel
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@infradead.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1377128846-977-5-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When measuring workloads the startup phase -- doing page faults, dynamic
linking, opening files -- is often very different from the rest of the
workload. Especially with smaller kernels and using counter
multiplexing this can give significant measurement errors.
Multiplexing assumes that the workload is mostly the same over longer
periods. But at startup there is typically some spike of activity which
is relatively short. If many groups are multiplexing the one group
seeing the spike, and which is then scaled up over the time to run all
groups, may see a significant error.
Also in general it's often not useful to measure the startup, because it
is so different from the rest.
One way around this is to use interval mode and discard the first
sample, but this can be awkward because interval mode doesn't support
intervals of less than 100ms, and also a useful interval is not
necessarily the same as a useful startup delay.
This patch adds a new --initial-delay / -D option to skip measuring for
the startup phase. The time can be specified in ms
Here's a simple example:
perf stat -e page-faults bash -c 'for i in $(seq 100000) ; do true ; done'
...
3,721 page-faults
...
If we just wait 20 ms the number of page faults is 1/3 less:
perf stat -D 20 -e page-faults bash -c 'for i in $(seq 100000) ; do true ; done'
...
2,823 page-faults
...
So we filtered out most of the startup noise from bash.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375490473-1503-4-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds the --per-core option to perf stat.
This option is used to aggregate system-wide counts
on a per physical core basis. On processors with
hyperthreading, this means counts of all HT threads
running on a physical core are aggregated.
This mode is useful to find imblance between physical
cores running an uniform workload. Cores are identified
by socket: S0-C1, means physical core 1 on socket 0. Note
that cores are identified using their physical core id,
thus their numbering may not be continuous.
Per core aggregation can be combined with interval printing:
# perf stat -a --per-core -I 1000 -e cycles sleep 1000
# time core cpus counts events
1.000090030 S0-C0 1 4,765,747 cycles
1.000090030 S0-C1 1 5,580,647 cycles
1.000090030 S0-C2 1 221,181 cycles
1.000090030 S0-C3 1 266,092 cycles
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1360846649-6411-4-git-send-email-eranian@google.com
[ committer note: Remove parts already applied on 86ee6e1 to keep bisectability ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To make it more obvious what this option does as suggested by Andi on
LKML.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1360846649-6411-3-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The following patch causes 'perf stat --repeat 0' to be interpreted as
'forever', displaying the stats for every run.
We act as if a single run was asked, and reset the stats in each
iteration. In this mode SIGINT is passed to perf to be able to stop the
loop with Ctrl+C.
Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20130301180227.GA24385@ks398093.ip-192-95-24.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds per-processor socket count aggregation for system-wide
mode measurements. This is a useful mode to detect imbalance between
sockets.
To enable this mode, use --aggr-socket in addition
to -a. (system-wide).
The output includes the socket number and the number of online
processors on that socket. This is useful to gauge the amount of
aggregation.
# ./perf stat -I 1000 -a --aggr-socket -e cycles sleep 2
# time socket cpus counts events
1.000097680 S0 4 5,788,785 cycles
2.000379943 S0 4 27,361,546 cycles
2.001167808 S0 4 818,275 cycles
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1360161962-9675-3-git-send-email-eranian@google.com
[ committer note: Added missing man page entry based on above comments ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds a new printing mode for perf stat. It allows interval
printing. That means perf stat can now print event deltas at regular
time interval. This is useful to detect phases in programs.
The -I option enables interval printing. It expects an interval duration
in milliseconds. Minimum is 100ms. Once, activated perf stat prints
events deltas since last printout. All modes are supported.
$ perf stat -I 1000 -e cycles noploop 10
noploop for 10 seconds
# time counts events
1.000109853 2,388,560,546 cycles
2.000262846 2,393,332,358 cycles
3.000354131 2,393,176,537 cycles
4.000439503 2,393,203,790 cycles
5.000527075 2,393,167,675 cycles
6.000609052 2,393,203,670 cycles
7.000691082 2,393,175,678 cycles
The output format makes it easy to feed into a plotting program such as
gnuplot when the -I option is used in combination with the -x option:
$ perf stat -x, -I 1000 -e cycles noploop 10
noploop for 10 seconds
1.000084113,2378775498,cycles
2.000245798,2391056897,cycles
3.000354445,2392089414,cycles
4.000459115,2390936603,cycles
5.000565341,2392108173,cycles
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1359460064-3060-3-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to measure kernel builds, one has to do some pre/post cleanup
work in order to do the repeat build.
So provide --pre and --post command hooks to allow doing just that.
perf stat --repeat 10 --null --sync --pre 'make -s O=defconfig-build/clean' \
-- make -s -j64 O=defconfig-build/ bzImage
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Stephane Eranian <eranian@gmail.com>
Link: http://lkml.kernel.org/r/1350992414.13456.5.camel@twins
[ committer note: Added respective entries in Documentation/perf-stat.txt ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allow a user to collect events for multiple threads or processes
using a comma separated list.
e.g., collect data on a VM and its vhost thread:
perf top -p 21483,21485
perf stat -p 21483,21485 -ddd
perf record -p 21483,21485
or monitoring vcpu threads
perf top -t 21488,21489
perf stat -t 21488,21489 -ddd
perf record -t 21488,21489
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1328718772-16688-1-git-send-email-dsahern@gmail.com
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This perf stat option emulates valgrind's --log-fd option, allowing the
user to send perf results elsewhere, and leaving stderr for use by the
program under test. This complements --output file option, and is
mutually exclusive with it.
3>results perf stat --log-fd 3 -- $cmd
3>>results perf stat --log-fd 3 --append -- $cmd
The perl distro's make test.valgrind target uses valgrind's --log-fd
option, I've adapted it to invoke perf also, and tested this patch
there.
Link: http://lkml.kernel.org/r/1315437244-3788-2-git-send-email-jim.cromie@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds an option (-o) to save the output of perf stat into a
file. You could do this with perf record but not with perf stat.
Instead, you had to fiddle with stderr to save the counts into a
separate file.
The patch also adds the --append option so that results can be
concatenated into a single file across runs. Each run of the tool is
clearly separated by a comment line starting with a hash mark. The -A
option of perf record is already used by perf stat, so we only add a
long option.
$ perf stat -o res.txt date
$ cat res.txt
Performance counter stats for 'date':
0.791306 task-clock # 0.668 CPUs utilized
2 context-switches # 0.003 M/sec
0 CPU-migrations # 0.000 M/sec
197 page-faults # 0.249 M/sec
1878143 cycles # 2.373 GHz
<not supported> stalled-cycles-frontend
<not supported> stalled-cycles-backend
1083367 instructions # 0.58 insns per cycle
193027 branches # 243.935 M/sec
9014 branch-misses # 4.67% of all branches
0.001184746 seconds time elapsed
The option can be combined with -x to make the output file much easier
to parse.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20110815202233.GA18535@quad
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds the ability to filter monitoring based on container groups
(cgroups) for both perf stat and perf record. It is possible to monitor
multiple cgroup in parallel. There is one cgroup per event. The cgroups to
monitor are passed via a new -G option followed by a comma separated list of
cgroup names.
The cgroup filesystem has to be mounted. Given a cgroup name, the perf tool
finds the corresponding directory in the cgroup filesystem and opens it. It
then passes that file descriptor to the kernel.
Example:
$ perf stat -B -a -e cycles:u,cycles:u,cycles:u -G test1,,test2 -- sleep 1
Performance counter stats for 'sleep 1':
2,368,667,414 cycles test1
2,369,661,459 cycles
<not counted> cycles test2
1.001856890 seconds time elapsed
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d590290.825bdf0a.7d0a.4890@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds an option (-x/--field-separator) to print counts using a
CSV-style output. The user can pass a custom separator. This makes it very easy
to import counts directly into your favorite spreadsheet without having to
write scripts.
Example:
$ perf stat --field-separator=, -a -- sleep 1
4009.961740,task-clock-msecs
13,context-switches
2,CPU-migrations
189,page-faults
9596385684,cycles
3493659441,instructions
872897069,branches
41562,branch-misses
22424,cache-references
1289,cache-misses
Works also in non-aggregated mode:
$ perf stat -x , -a -A -- sleep 1
CPU0,1002.526168,task-clock-msecs
CPU1,1002.528365,task-clock-msecs
CPU2,1002.523360,task-clock-msecs
CPU3,1002.519878,task-clock-msecs
CPU0,1,context-switches
CPU1,5,context-switches
CPU2,5,context-switches
CPU3,6,context-switches
CPU0,0,CPU-migrations
CPU1,1,CPU-migrations
CPU2,0,CPU-migrations
CPU3,1,CPU-migrations
CPU0,2,page-faults
CPU1,6,page-faults
CPU2,9,page-faults
CPU3,174,page-faults
CPU0,2399439771,cycles
CPU1,2380369063,cycles
CPU2,2399142710,cycles
CPU3,2373161192,cycles
CPU0,872900618,instructions
CPU1,873030960,instructions
CPU2,872714525,instructions
CPU3,874460580,instructions
CPU0,221556839,branches
CPU1,218134342,branches
CPU2,218161730,branches
CPU3,218284093,branches
CPU0,18556,branch-misses
CPU1,1449,branch-misses
CPU2,3447,branch-misses
CPU3,12714,branch-misses
CPU0,8330,cache-references
CPU1,313844,cache-references
CPU2,47993728,cache-references
CPU3,826481,cache-references
CPU0,272,cache-misses
CPU1,5360,cache-misses
CPU2,1342193,cache-misses
CPU3,13992,cache-misses
This second version adds the ability to name a separator and uses
field-separator as the long option to be consistent with perf report.
Commiter note: Since we enabled --big-num by default in 201e0b0 and -x can't be
used with it, we need to notice if the user explicitely enabled or disabled -B,
add code to disable big_num if the user didn't explicitely set --big_num when
-x is used.
Cc: David S. Miller <davem@davemloft.net>
Cc: Frederik Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: paulus@samba.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
LKML-Reference: <4cf68aa7.0fedd80a.5294.1203@mx.google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds a new -A option to perf stat. If specified then perf stat does
not aggregate counts across all monitored CPUs in system-wide mode, i.e., when
using -a. This option is not supported in per-thread mode.
Being able to get a per-cpu breakdown is useful to detect imbalances between
CPUs when running a uniform workload than spans all monitored CPUs.
The second version corrects the missing cpumap[] support, so that it works when
the -C option is used.
The third version fixes a missing cpumap[] in print_counter() and removes a
stray patch in builtin-trace.c.
Examples on a 4-way system:
# perf stat -a -e cycles,instructions -- sleep 1
Performance counter stats for 'sleep 1':
9592808135 cycles
3490380006 instructions # 0.364 IPC
1.001584632 seconds time elapsed
# perf stat -a -A -e cycles,instructions -- sleep 1
Performance counter stats for 'sleep 1':
CPU0 2398163767 cycles
CPU1 2398180817 cycles
CPU2 2398217115 cycles
CPU3 2398247483 cycles
CPU0 872282046 instructions # 0.364 IPC
CPU1 873481776 instructions # 0.364 IPC
CPU2 872638127 instructions # 0.364 IPC
CPU3 872437789 instructions # 0.364 IPC
1.001556052 seconds time elapsed
Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
LKML-Reference: <4ce257b5.1e07e30a.7b6b.3aa9@mx.google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds a -C option to stat, record, top to designate a list of CPUs to
monitor. CPUs can be specified as a comma-separated list or ranges, no space
allowed.
Examples:
$ perf record -a -C0-1,4-7 sleep 1
$ perf top -C0-4
$ perf stat -a -C1,2,3,4 sleep 1
With perf record in per-thread mode with inherit mode on, samples are collected
only when the thread runs on the designated CPUs.
The -C option does not turn on system-wide mode automatically.
Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4bff9496.d345d80a.41fe.7b00@mx.google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is hard to read very large numbers so provide an option to perf stat
to separate thousands using a separator. The patch leverages the locale
support of stdio. You need to set your LC_NUMERIC appropriately, for
instance LC_NUMERIC=en_US.UTF8. You need to pass -B to activate this
feature. This way existing scripts parsing the output do not need to be
changed. Here is an example.
$ perf stat noploop 2
noploop for 2 seconds
Performance counter stats for 'noploop 2':
1998.347031 task-clock-msecs # 0.998 CPUs
61 context-switches # 0.000 M/sec
0 CPU-migrations # 0.000 M/sec
118 page-faults # 0.000 M/sec
4,138,410,900 cycles # 2070.917 M/sec (scaled from 70.01%)
2,062,650,268 instructions # 0.498 IPC (scaled from 70.01%)
2,057,653,466 branches # 1029.678 M/sec (scaled from 70.01%)
40,267 branch-misses # 0.002 % (scaled from 30.04%)
2,055,961,348 cache-references # 1028.831 M/sec (scaled from 30.03%)
53,725 cache-misses # 0.027 M/sec (scaled from 30.02%)
2.001393933 seconds time elapsed
$ perf stat -B noploop 2
noploop for 2 seconds
Performance counter stats for 'noploop 2':
1998.297883 task-clock-msecs # 0.998 CPUs
59 context-switches # 0.000 M/sec
0 CPU-migrations # 0.000 M/sec
119 page-faults # 0.000 M/sec
4,131,380,160 cycles # 2067.450 M/sec (scaled from 70.01%)
2,059,096,507 instructions # 0.498 IPC (scaled from 70.01%)
2,054,681,303 branches # 1028.216 M/sec (scaled from 70.01%)
25,650 branch-misses # 0.001 % (scaled from 30.05%)
2,056,283,014 cache-references # 1029.017 M/sec (scaled from 30.03%)
47,097 cache-misses # 0.024 M/sec (scaled from 30.02%)
2.001391016 seconds time elapsed
Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4bf28fe8.914ed80a.01ca.fffff5f5@mx.google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By default, event inheritance across fork and pthread_create was on but the -i
option of stat and record, which enabled inheritance, led to believe it was off
by default.
This patch fixes this logic by inverting the meaning of the -i option. By
default inheritance is on whether you attach to a process (-p), a thread (-t)
or start a process. If you pass -i, then you turn off inheritance. Turning off
inheritance if you don't need it, helps limit perf resource usage as well.
The patch also fixes perf stat -t xxxx and perf record -t xxxx which did not
start the counters.
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <4bea9d2f.d60ce30a.0b5b.08e1@mx.google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We want to use a coherent flag for -S/--stat across all tools,
so free up -S in perf stat.
Signed-off-by: Brice Goglin <Brice.Goglin@inria.fr>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus@samba.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
-l is not supported, it should be -S for scale.
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1245703959.6167.16.camel@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Several people have suggested that 'perf' has become a full-fledged
tool that should be moved out of Documentation/. Move it to the
(new) tools/ directory.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
yuzhoujian