Everyone who implements connector_helper_funcs->atomic_check reaches
into the connector state to get the atomic state. Instead of continuing
this pattern, change the callback signature to just give atomic state
and let the driver determine what it does and does not need from it.
Eventually all atomic functions should do this, but that's just too much
busy work for me.
Changes in v3:
- Added to the set
Changes in v4:
- None
Changes in v5:
- intel_digital_connector_atomic_check declaration moved to i915_atomic.h
Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-5-sean@poorly.run
Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-5-sean@poorly.run
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: Eric Anholt <eric@anholt.net>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [for rcar lvds]
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-5-sean@poorly.run
- Engine discovery query (Tvrtko)
- Support for DP YCbCr4:2:0 outputs (Gwan-gyeong)
- HDCP revocation support, refactoring (Ramalingam)
- Remove DRM_AUTH from IOCTLs which also have DRM_RENDER_ALLOW (Christian König)
- Asynchronous display power disabling (Imre)
- Perma-pin uC firmware and re-enable global reset (Fernando)
- GTT remapping for display, for bigger fb size and stride (Ville)
- Enable pipe HDR mode on ICL if only HDR planes are used (Ville)
- Kconfig to tweak the busyspin durations for i915_wait_request (Chris)
- Allow multiple user handles to the same VM (Chris)
- GT/GEM runtime pm improvements using wakerefs (Chris)
- Gen 4&5 render context support (Chris)
- Allow userspace to clone contexts on creation (Chris)
- SINGLE_TIMELINE flags for context creation (Chris)
- Allow specification of parallel execbuf (Chris)
Refactoring:
- Header refactoring (Jani)
- Move GraphicsTechnology files under gt/ (Chris)
- Sideband code refactoring (Chris)
Fixes:
- ICL DSI state readout and checker fixes (Vandita)
- GLK DSI picture corruption fix (Stanislav)
- HDMI deep color fixes (Clinton, Aditya)
- Fix driver unbinding from a device in use (Janusz)
- Fix clock gating with pipe scaling (Radhakrishna)
- Disable broken FBC on GLK (Daniel Drake)
- Miscellaneous GuC fixes (Michal)
- Fix MG PHY DP register programming (Imre)
- Add missing combo PHY lane power setup (Imre)
- Workarounds for early ICL VBT issues (Imre)
- Fix fastset vs. pfit on/off on HSW EDP transcoder (Ville)
- Add readout and state check for pch_pfit.force_thru (Ville)
- Miscellaneous display fixes and refactoring (Ville)
- Display workaround fixes (Ville)
- Enable audio even if ELD is bogus (Ville)
- Fix use-after-free in reporting create.size (Chris)
- Sideband fixes to avoid BYT hard lockups (Chris)
- Workaround fixes and improvements (Chris)
Maintainer shortcomings:
- Failure to adequately describe and give credit for all changes (Jani)
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEFWWmW3ewYy4RJOWc05gHnSar7m8FAlzoK8oACgkQ05gHnSar
7m8jZg//UuIkz4bIu7A0YfN/VH3/h3fthxboejj27HpO4OO9eFqLVqaEUFEngGvf
66fnFKNwtLdW7Dsx9iQsKNsVTcdsEE5PvSA6FZ3rVtYOwBdZ9OKYRxci2KcSnjqz
F0/8Jxgz2G0gu9TV6dgTLrfdJiuJrCbidRV3G5id0XHNEGbpABtmVxYfsbj/w9mU
luckCgKyRDZNzfhyGIPV763bNGZWLQPcbP99yrZf4+EcsiQ2MfjHJdwe5Ko+iGDk
sO3lFg/1iEf41gqaD4LPokOtUKZfXI1Sujs1w/0djDbqs9USq0eY1L5C3ZBq5Si1
woz7ATXO71FfBcNRxLTejNqCVlQMLix/185/ItkDA4gDlHwWZPYaT5VTNgRtEEy6
XNtscZyM6Z1ghqRqahWWu40g80sOdfYuiTFEAYonVbDAUootgF46uWO/2ib0Hya+
tYlm60M097eMealzaXEyHPHlW1OeUUJTKxl9j7nHmqVn542OI8gn7xvIXX2VsYDY
7D4gVPoFg0UpGXM2uuSHVgvxwtg4t083Wu+utYu76RjmwNye4LkHewWGFjmOkYRf
BraHoA+gKPFtAJjjtkyE/ZnlT4c3tDoQ0a6+gRKVurXzu/Y6JVzquhJvH5mShyZ7
oTv+erupcz7JEnEeKzgMCyon/Drumiut5I6zr29GNQ3eelpf4jQ=
=U/nc
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2019-05-24' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
Features:
- Engine discovery query (Tvrtko)
- Support for DP YCbCr4:2:0 outputs (Gwan-gyeong)
- HDCP revocation support, refactoring (Ramalingam)
- Remove DRM_AUTH from IOCTLs which also have DRM_RENDER_ALLOW (Christian König)
- Asynchronous display power disabling (Imre)
- Perma-pin uC firmware and re-enable global reset (Fernando)
- GTT remapping for display, for bigger fb size and stride (Ville)
- Enable pipe HDR mode on ICL if only HDR planes are used (Ville)
- Kconfig to tweak the busyspin durations for i915_wait_request (Chris)
- Allow multiple user handles to the same VM (Chris)
- GT/GEM runtime pm improvements using wakerefs (Chris)
- Gen 4&5 render context support (Chris)
- Allow userspace to clone contexts on creation (Chris)
- SINGLE_TIMELINE flags for context creation (Chris)
- Allow specification of parallel execbuf (Chris)
Refactoring:
- Header refactoring (Jani)
- Move GraphicsTechnology files under gt/ (Chris)
- Sideband code refactoring (Chris)
Fixes:
- ICL DSI state readout and checker fixes (Vandita)
- GLK DSI picture corruption fix (Stanislav)
- HDMI deep color fixes (Clinton, Aditya)
- Fix driver unbinding from a device in use (Janusz)
- Fix clock gating with pipe scaling (Radhakrishna)
- Disable broken FBC on GLK (Daniel Drake)
- Miscellaneous GuC fixes (Michal)
- Fix MG PHY DP register programming (Imre)
- Add missing combo PHY lane power setup (Imre)
- Workarounds for early ICL VBT issues (Imre)
- Fix fastset vs. pfit on/off on HSW EDP transcoder (Ville)
- Add readout and state check for pch_pfit.force_thru (Ville)
- Miscellaneous display fixes and refactoring (Ville)
- Display workaround fixes (Ville)
- Enable audio even if ELD is bogus (Ville)
- Fix use-after-free in reporting create.size (Chris)
- Sideband fixes to avoid BYT hard lockups (Chris)
- Workaround fixes and improvements (Chris)
Maintainer shortcomings:
- Failure to adequately describe and give credit for all changes (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87sgt3n45z.fsf@intel.com
Cross-subsystem Changes:
- Fix device tree bindings in drm-misc-next after a botched merge.
Core Changes:
- Docbook fix for drm_hdmi_infoframe_set_hdr_metadata.
Driver Changes:
- mediatek: Fix compiler warning after merging the HDR series.
- vc4: Rework binner bo handling.
-----BEGIN PGP SIGNATURE-----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=2K7c
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-05-24' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.3, try #2:
UAPI Changes:
- Add HDR source metadata property.
- Make drm.h compile on GNU/kFreeBSD by including stdint.h
- Clarify how the userspace reviewer has to review new kernel UAPI.
- Clarify that for using new UAPI, merging to drm-next or drm-misc-next should be enough.
Cross-subsystem Changes:
- video/hdmi: Add unpack function for DRM infoframes.
- Device tree bindings:
* Updating a property for Mali Midgard GPUs
* Updating a property for STM32 DSI panel
* Adding support for FriendlyELEC HD702E 800x1280 panel
* Adding support for Evervision VGG804821 800x480 5.0" WVGA TFT panel
* Adding support for the EDT ET035012DM6 3.5" 320x240 QVGA 24-bit RGB TFT.
* Adding support for Three Five displays TFC S9700RTWV43TR-01B 800x480 panel
with resistive touch found on TI's AM335X-EVM.
* Adding support for EDT ETM0430G0DH6 480x272 panel.
- Add OSD101T2587-53TS driver with DT bindings.
- Add Samsung S6E63M0 panel driver with DT bindings.
- Add VXT VL050-8048NT-C01 800x480 panel with DT bindings.
- Dma-buf:
- Make mmap callback actually optional.
- Documentation updates.
- Fix debugfs refcount inbalance.
- Remove unused sync_dump function.
- Fix device tree bindings in drm-misc-next after a botched merge.
Core Changes:
- Add support for HDR infoframes and related EDID parsing.
- Remove prime sg_table caching, now done inside dma-buf.
- Add shiny new drm_gem_vram helpers for simple VRAM drivers;
with some fixes to the new API on top.
- Small fix to job cleanup without timeout handler.
- Documentation fixes to drm_fourcc.
- Replace lookups of drm_format with struct drm_format_info;
remove functions that become obsolete by this conversion.
- Remove double include in bridge/panel.c and some drivers.
- Remove drmP.h include from drm/edid and drm/dp.
- Fix null pointer deref in drm_fb_helper_hotplug_event().
- Remove most members from drm_fb_helper_crtc, only mode_set is kept.
- Remove race of fb helpers with userspace; only restore mode
when userspace is not master.
- Move legacy setup from drm_file.c to drm_legacy_misc.c
- Rework scheduler job destruction.
- drm/bus was removed, remove from TODO.
- Add __drm_atomic_helper_crtc_reset() to subclass crtc_state,
and convert some drivers to use it (conversion is not complete yet).
- Bump vblank timeout wait to 100 ms for atomic.
- Docbook fix for drm_hdmi_infoframe_set_hdr_metadata.
Driver Changes:
- sun4i: Use DRM_GEM_CMA_VMAP_DRIVER_OPS instead of definining manually.
- v3d: Small cleanups, adding support for compute shaders,
reservation/synchronization fixes and job management refactoring,
fixes MMU and debugfs.
- lima: Fix null pointer in irq handler on startup, set default timeout for scheduled jobs.
- stm/ltdc: Assorted fixes and adding FB modifier support.
- amdgpu: Avoid hw reset if guilty job was already signaled.
- virtio: Add seqno to fences, add trace events, use correct flags for fence allocation.
- Convert AST, bochs, mgag200, vboxvideo, hisilicon to the new drm_gem_vram API.
- sun6i_mipi_dsi: Support DSI GENERIC_SHORT_WRITE_2 transfers.
- bochs: Small fix to use PTR_RET_OR_ZERO and driver unload.
- gma500: header fixes
- cirrus: Remove unused files.
- mediatek: Fix compiler warning after merging the HDR series.
- vc4: Rework binner bo handling.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/052875a5-27ba-3832-60c2-193d950afdff@linux.intel.com
-----BEGIN PGP SIGNATURE-----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=4Wu/
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2019-05-24-1' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Nothing too unusual here for rc2. Except the amdgpu DMCU firmware
loading fix caused build breakage with a different set of Kconfig
options. I've just reverted it for now until the AMD folks can rewrite
it to avoid that problem.
i915:
- boosting fix
- bump ready task fixes
- GVT - reset fix, error return, TRTT handling fix
amdgpu:
- DMCU firmware loading fix
- Polaris 10 pci id for kfd
- picasso screen corruption fix
- SR-IOV fixes
- vega driver reload fixes
- SMU locking fix
- compute profile fix for kfd
vmwgfx:
- integer overflow fixes
- dma sg fix
sun4i:
- HDMI phy fixes
gma500:
- LVDS detection fix
panfrost:
- devfreq selection fix"
* tag 'drm-fixes-2019-05-24-1' of git://anongit.freedesktop.org/drm/drm: (32 commits)
Revert "drm/amd/display: Don't load DMCU for Raven 1"
drm/panfrost: Select devfreq
drm/gma500/cdv: Check vbt config bits when detecting lvds panels
drm/vmwgfx: integer underflow in vmw_cmd_dx_set_shader() leading to an invalid read
drm/vmwgfx: NULL pointer dereference from vmw_cmd_dx_view_define()
drm/vmwgfx: Use the dma scatter-gather iterator to get dma addresses
drm/vmwgfx: Fix compat mode shader operation
drm/vmwgfx: Fix user space handle equal to zero
drm/vmwgfx: Don't send drm sysfs hotplug events on initial master set
drm/i915/gvt: Fix an error code in ppgtt_populate_spt_by_guest_entry()
drm/i915/gvt: do not let TRTTE and 0x4dfc write passthrough to hardware
drm/i915/gvt: add 0x4dfc to gen9 save-restore list
drm/i915/gvt: Tiled Resources mmios are in-context mmios for gen9+
drm/i915/gvt: use cmd to restore in-context mmios to hw for gen9 platform
drm/i915/gvt: emit init breadcrumb for gvt request
drm/amdkfd: Fix compute profile switching
drm/amdgpu: skip fw pri bo alloc for SRIOV
drm/amd/powerplay: fix locking in smu_feature_set_supported()
drm/amdgpu/gmc9: set vram_width properly for SR-IOV
drm/amdgpu/soc15: skip reset on init
...
Setting bit5 (headerless msg for preemptible GPGPU context) of SAMPLER_MODE
register to enable support for the headless msgs on gen11. None of existing
use cases will be affected by this as this change makes both types of
message - headerless and w/ header supported at the same time. It also
complies with the new recommendation for the default bit value for the
next gen.
v2: rewrote commit message to include more information
v3: setting the bit in icl_ctx_workarounds_init()
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190425055005.21790-1-chris@chris-wilson.co.uk
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Having deferred the vma destruction to a worker where we can acquire the
struct_mutex, we have to avoid chasing back into the now destroyed
ppgtt. The pd_vma is special in having a custom unbind function to scan
for unused pages despite the VMA itself being notionally part of the
GGTT. As such, we need to disable that callback to avoid a
use-after-free.
This unfortunately blew up so early during boot that CI declared the
machine unreachable as opposed to being the major failure it was. Oops.
Fixes: d3622099c7 ("drm/i915/gtt: Always acquire struct_mutex for gen6_ppgtt_cleanup")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Tomi Sarvela <tomi.p.sarvela@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524064529.20514-1-chris@chris-wilson.co.uk
This patch removes IO_TLB_SEGPAGES which is no longer used since
commit 5584f1b1d7 ("drm/i915: fix i915 running as dom0 under Xen").
As the define of both IO_TLB_SEGSIZE and IO_TLB_SHIFT are from swiotlb,
IO_TLB_SEGPAGES should be defined on swiotlb side if it is required in the
future.
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1558413639-22568-1-git-send-email-dongli.zhang@oracle.com
We may skip reset preparation steps if GuC is already sanitized.
v2: replace USES_GUC with guc_is_loaded
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190522193203.23932-10-michal.wajdeczko@intel.com
Knowing that GuC will be reset soon, we may stop all communication
immediately without doing graceful cleanup as it is not needed.
This patch will also help us capture any unwanted/unexpected attempts
to talk with GuC after we decided to reset it. And we need to keep
'disable' part as current and upcoming firmware still expect graceful
cleanup.
v2: update commit msg
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190523172555.2780-1-michal.wajdeczko@intel.com
We should not attempt to unwind GuC hardware/firmware setup
if we already have sanitized GuC.
v2: replace USES_GUC with guc_is_loaded
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190522193203.23932-8-michal.wajdeczko@intel.com
We already have helper function for checking GuC firmware
load status. Replace existing open-coded checks.
v2: drop redundant USES_GUC check
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190522193203.23932-7-michal.wajdeczko@intel.com
Explicitly sanitize GuC/HuC on load failure and when we finish
using them to make sure our fw state tracking is always correct.
While around, use new helper in uc_reset_prepare.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190522193203.23932-6-michal.wajdeczko@intel.com
This function just check our software flag, while 'is_alive'
may suggest that we are checking runtime firmware status.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190522193203.23932-5-michal.wajdeczko@intel.com
We were testing full GPU reset in atomic context without correctly
wrapping it by prepare/finish steps. This could confuse our GuC
reset handling code.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190522193203.23932-4-michal.wajdeczko@intel.com
Split igt_atomic_reset selftests into separate full & engines parts,
so we can move former to the dedicated reset selftests file.
While here change engines test to loop first over atomic phases and
then loop over available engines.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190522193203.23932-3-michal.wajdeczko@intel.com
igt_global_reset and igt_wedged_reset testcases are first candidates.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190522193203.23932-2-michal.wajdeczko@intel.com
Bspec describes that GEN10 only supports capability of YUV 4:2:0 output to
HDMI port and GEN11 supports capability of YUV 4:2:0 output to both DP and
HDMI ports.
v2: Minor style fix.
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190521121721.32010-7-gwan-gyeong.mun@intel.com
Data M/N calculations were assumed a bpp as RGB format. But when we are
using YCbCr 4:2:0 output format on DP, we should change bpp calculations
as YCbCr 4:2:0 format. The pipe_bpp value was assumed RGB format,
therefore, it was multiplied with 3. But YCbCr 4:2:0 requires a multiplier
value to 1.5.
Therefore we need to divide pipe_bpp to 2 while DP output uses YCbCr4:2:0
format.
- RGB format bpp = bpc x 3
- YCbCr 4:2:0 format bpp = bpc x 1.5
But Link M/N values are calculated and applied based on the Full Clock for
YCbCr 4:2:0. And DP YCbCr 4:2:0 does not need to pixel clock double for
a dotclock caluation. Only for HDMI YCbCr 4:2:0 needs to pixel clock double
for a dot clock calculation.
It only affects dp and edp port which use YCbCr 4:2:0 output format.
And for now, it does not consider a use case of DSC + YCbCr 4:2:0.
v2:
Addressed review comments from Ville.
Remove a changing of pipe_bpp on intel_ddi_set_pipe_settings().
Because the pipe is running at the full bpp, keep pipe_bpp as RGB
even though YCbCr 4:2:0 output format is used.
Add a link bandwidth computation for YCbCr4:2:0 output format.
v3:
Addressed reivew comments from Ville.
In order to make codes simple, it adds and uses intel_dp_output_bpp()
function.
v6:
Link M/N values are calculated and applied based on the Full Clock for
YCbCr420. The Bit per Pixel needs to be adjusted for YUV420 mode as it
requires only half of the RGB case.
- Link M/N values are calculated and applied based on the Full Clock
- Data M/N values needs to be calculated considering the data is half
due to subsampling
Remove a doubling of pixel clock on a dot clock calculator for
DP YCbCr 4:2:0.
Rebase and remove a duplicate setting of vsc_sdp.DB17.
Add a setting of dynamic range bit to vsc_sdp.DB17.
Change Content Type bit to "Graphics" from "Not defined".
Change a dividing of pipe_bpp to muliplying to constant values on a
switch-case statement.
v7:
Addressed review comments from Ville.
Move a setting of dynamic range bit and a setting of bpc which is based
on pipe_bpp to a "drm/i915/dp: Program VSC Header and DB for Pixel
Encoding/Colorimetry Format" commit.
Change Content Type bit to "Not defined" from "Graphics".
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190521121721.32010-6-gwan-gyeong.mun@intel.com
When YCBCR 4:2:0 outputs is used for DP, we should program YCBCR 4:2:0 to
MSA and VSC SDP.
As per DP 1.4a spec section 2.2.4.3 [MSA Field for Indication of Color
Encoding Format and Content Color Gamut] while sending YCBCR 420 signals
we should program MSA MISC1 fields which indicate VSC SDP for the Pixel
Encoding/Colorimetry Format.
v2: Block comment style fix.
v6:
Fix an wrong setting of MSA MISC1 fields for Pixel Encoding/Colorimetry
Format indication. As per DP 1.4a spec Table 2-96 [MSA MISC1 and MISC0
Fields for Pixel Encoding/Colorimetry Format Indication]
When MISC1, bit 6, is Set to 1, a Source device uses a VSC SDP to
indicate the Pixel Encoding/Colorimetry Format. On the wrong version
it set a bit 5 of MISC1, now it set a bit 6 of MISC1.
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190521121721.32010-5-gwan-gyeong.mun@intel.com
Function intel_pixel_encoding_setup_vsc handles vsc header and data block
setup for pixel encoding / colorimetry format.
Setup VSC header and data block in function intel_pixel_encoding_setup_vsc
for pixel encoding / colorimetry format as per dp 1.4a spec,
section 2.2.5.7.1, table 2-119: VSC SDP Header Bytes, section 2.2.5.7.5,
table 2-120:VSC SDP Payload for DB16 through DB18.
v2:
Minor style fix. [Maarten]
Refer to commit ids instead of patchwork. [Maarten]
v6: Rebase
v7:
Rebase and addressed review comments from Ville.
Use a structure initializer instead of memset().
Fix non-standard comment format.
Remove a referring to specific commit.
Add a setting of dynamic range bit to vsc_sdp.DB17.
Add a setting of bpc which is based on pipe_bpp.
Remove duplicated checking of connector's ycbcr_420_allowed from
intel_pixel_encoding_setup_vsc(). It is already checked from
intel_dp_ycbcr420_config().
Remove comments for VSC_SDP_EXTENSION_FOR_COLORIMETRY_SUPPORTED. It is
already implemented on intel_dp_get_colorimetry_status().
v8:
A missing of setting bpc to VSC setup is the pretty fatal case, it
replaces DRM_DEBUG_KMS() to MISSING_CASE(). [Maarten]
v9: Use a changed member name of struct dp_sdp. it renamed to db from DB.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190521121721.32010-4-gwan-gyeong.mun@intel.com
VSC SDP Payload for PSR is one of data block type of SDP (Secondaray Data
Packet). In order to generalize SDP packet structure name, it renames
struct edp_vsc_psr to struct dp_sdp. And each SDP data blocks have
different usages, each SDP type has different reserved data blocks and
Video_Stream_Configuration Extension VESA SDP might use all of Data Blocks
as Extended INFORFRAME Data Byte. so it makes Data Block variables as
array type. And it adds comments of details of DB of VSC SDP Payload
for Pixel Encoding/Colorimetry Format. This comments follows DP 1.4a spec,
section 2.2.5.7.5, chapter "VSC SDP Payload for Pixel Encoding/Colorimetry
Format".
v7: Addressed review comments from Ville.
v9: Rename a member value name DB to db on struct dp_sdp [Laurent]
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190521121721.32010-3-gwan-gyeong.mun@intel.com
This patch checks a support of YCBCR420 outputs on an encoder level.
If the input mode is YCBCR420-only mode then it prepares DP as an YCBCR420
output, else it continues with RGB output mode.
It set output_format to INTEL_OUTPUT_FORMAT_YCBCR420 in order to using
a pipe scaler as RGB to YCbCr 4:4:4.
v2:
Addressed review comments from Ville.
Style fixed with few naming.
%s/config/crtc_state/
%s/intel_crtc/crtc/
If lscon is active, it makes not to call intel_dp_ycbcr420_config()
to avoid to clobber of lspcon_ycbcr420_config() routine.
And it move the 420_only check into the intel_dp_ycbcr420_config().
v3: Fix uninitialized return value and it is reported by Dan Carpenter.
v4:
Addressed review comments from Ville.
In order to avoid the extra indentation, it inverts if-clause on
intel_dp_ycbcr420_config().
Remove the error print where no errors print are allowed.
v6: Rebase
v7:
Move intel_dp_get_colorimetry_status() to intel_dp from intel_psr.
intel_dp_get_colorimetry_status() checks
VSC_SDP_EXTENSION_FOR_COLORIMETRY_SUPPORTED bit in the
DPRX_FEATURE_ENUMERATION_LIST register.
And intel_dp_ycbcr420_config() uses intel_dp_get_colorimetry_status().
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190521121721.32010-2-gwan-gyeong.mun@intel.com
Engine discovery query allows userspace to enumerate engines, probe their
configuration features, all without needing to maintain the internal PCI
ID based database.
A new query for the generic i915 query ioctl is added named
DRM_I915_QUERY_ENGINE_INFO, together with accompanying structure
drm_i915_query_engine_info. The address of latter should be passed to the
kernel in the query.data_ptr field, and should be large enough for the
kernel to fill out all known engines as struct drm_i915_engine_info
elements trailing the query.
As with other queries, setting the item query length to zero allows
userspace to query minimum required buffer size.
Enumerated engines have common type mask which can be used to query all
hardware engines, versus engines userspace can submit to using the execbuf
uAPI.
Engines also have capabilities which are per engine class namespace of
bits describing features not present on all engine instances.
v2:
* Fixed HEVC assignment.
* Reorder some fields, rename type to flags, increase width. (Lionel)
* No need to allocate temporary storage if we do it engine by engine.
(Lionel)
v3:
* Describe engine flags and mark mbz fields. (Lionel)
* HEVC only applies to VCS.
v4:
* Squash SFC flag into main patch.
* Tidy some comments.
v5:
* Add uabi_ prefix to engine capabilities. (Chris Wilson)
* Report exact size of engine info array. (Chris Wilson)
* Drop the engine flags. (Joonas Lahtinen)
* Added some more reserved fields.
* Move flags after class/instance.
v6:
* Do not check engine info array was zeroed by userspace but zero the
unused fields for them instead.
v7:
* Simplify length calculation loop. (Lionel Landwerlin)
v8:
* Remove MBZ comments where not applicable.
* Rename ABI flags to match engine class define naming.
* Rename SFC ABI flag to reflect it applies to VCS and VECS.
* SFC is wired to even _logical_ engine instances.
* SFC applies to VCS and VECS.
* HEVC is present on all instances on Gen11. (Tony)
* Simplify length calculation even more. (Chris Wilson)
* Move info_ptr assigment closer to loop for clarity. (Chris Wilson)
* Use vdbox_sfc_access from runtime info.
* Rebase for RUNTIME_INFO.
* Refactor for lower indentation.
* Rename uAPI class/instance to engine_class/instance to avoid C++
keyword.
v9:
* Rebase for s/num_rings/num_engines/ in RUNTIME_INFO.
v10:
* Use new copy_query_item.
v11:
* Consolidate with struct i915_engine_class_instnace.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tony Ye <tony.ye@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> # v7
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190522090054.6007-1-tvrtko.ursulin@linux.intel.com
Test context workarounds have been correctly applied in newly created
contexts.
To accomplish this the existing engine_wa_list_verify helper is extended
to take in a context from which reading of the workaround list will be
done.
Context workaround verification is done from the existing subtests, which
have been renamed to reflect they are no longer only about GT and engine
workarounds.
v2:
* Test after resets and refactor to use intel_context more. (Chris)
v3:
* Use ce->engine->i915 instead of ce->gem_context->i915. (Chris)
* gem_engine_iter.idx is engine->id + 1. (Chris)
v4:
* Make local function static.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190520142546.12493-1-tvrtko.ursulin@linux.intel.com
There is a desire to split a task onto two engines and have them run at
the same time, e.g. scanline interleaving to spread the workload evenly.
Through the use of the out-fence from the first execbuf, we can
coordinate secondary execbuf to only become ready simultaneously with
the first, so that with all things idle the second execbufs are executed
in parallel with the first. The key difference here between the new
EXEC_FENCE_SUBMIT and the existing EXEC_FENCE_IN is that the in-fence
waits for the completion of the first request (so that all of its
rendering results are visible to the second execbuf, the more common
userspace fence requirement).
Since we only have a single input fence slot, userspace cannot mix an
in-fence and a submit-fence. It has to use one or the other! This is not
such a harsh requirement, since by virtue of the submit-fence, the
secondary execbuf inherit all of the dependencies from the first
request, and for the application the dependencies should be common
between the primary and secondary execbuf.
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Testcase: igt/gem_exec_fence/parallel
Link: https://github.com/intel/media-driver/pull/546
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190521211134.16117-10-chris@chris-wilson.co.uk
Some users require that when a master batch is executed on one particular
engine, a companion batch is run simultaneously on a specific slave
engine. For this purpose, we introduce virtual engine bonding, allowing
maps of master:slaves to be constructed to constrain which physical
engines a virtual engine may select given a fence on a master engine.
For the moment, we continue to ignore the issue of preemption deferring
the master request for later. Ideally, we would like to then also remove
the slave and run something else rather than have it stall the pipeline.
With load balancing, we should be able to move workload around it, but
there is a similar stall on the master pipeline while it may wait for
the slave to be executed. At the cost of more latency for the bonded
request, it may be interesting to launch both on their engines in
lockstep. (Bubbles abound.)
Opens: Also what about bonding an engine as its own master? It doesn't
break anything internally, so allow the silliness.
v2: Emancipate the bonds
v3: Couple in delayed scheduling for the selftests
v4: Handle invalid mutually exclusive bonding
v5: Mention what the uapi does
v6: s/nbond/num_bonds/
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190521211134.16117-9-chris@chris-wilson.co.uk
In the next patch, we will want to configure the slave request
depending on which physical engine the master request is executed on.
For this, we introduce a callback from the execute fence to convey this
information.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190521211134.16117-8-chris@chris-wilson.co.uk
Allow the user to direct which physical engines of the virtual engine
they wish to execute one, as sometimes it is necessary to override the
load balancing algorithm.
v2: Only kick the virtual engines on context-out if required
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190521211134.16117-7-chris@chris-wilson.co.uk
Having allowed the user to define a set of engines that they will want
to only use, we go one step further and allow them to bind those engines
into a single virtual instance. Submitting a batch to the virtual engine
will then forward it to any one of the set in a manner as best to
distribute load. The virtual engine has a single timeline across all
engines (it operates as a single queue), so it is not able to concurrently
run batches across multiple engines by itself; that is left up to the user
to submit multiple concurrent batches to multiple queues. Multiple users
will be load balanced across the system.
The mechanism used for load balancing in this patch is a late greedy
balancer. When a request is ready for execution, it is added to each
engine's queue, and when an engine is ready for its next request it
claims it from the virtual engine. The first engine to do so, wins, i.e.
the request is executed at the earliest opportunity (idle moment) in the
system.
As not all HW is created equal, the user is still able to skip the
virtual engine and execute the batch on a specific engine, all within the
same queue. It will then be executed in order on the correct engine,
with execution on other virtual engines being moved away due to the load
detection.
A couple of areas for potential improvement left!
- The virtual engine always take priority over equal-priority tasks.
Mostly broken up by applying FQ_CODEL rules for prioritising new clients,
and hopefully the virtual and real engines are not then congested (i.e.
all work is via virtual engines, or all work is to the real engine).
- We require the breadcrumb irq around every virtual engine request. For
normal engines, we eliminate the need for the slow round trip via
interrupt by using the submit fence and queueing in order. For virtual
engines, we have to allow any job to transfer to a new ring, and cannot
coalesce the submissions, so require the completion fence instead,
forcing the persistent use of interrupts.
- We only drip feed single requests through each virtual engine and onto
the physical engines, even if there was enough work to fill all ELSP,
leaving small stalls with an idle CS event at the end of every request.
Could we be greedy and fill both slots? Being lazy is virtuous for load
distribution on less-than-full workloads though.
Other areas of improvement are more general, such as reducing lock
contention, reducing dispatch overhead, looking at direct submission
rather than bouncing around tasklets etc.
sseu: Lift the restriction to allow sseu to be reconfigured on virtual
engines composed of RENDER_CLASS (rcs).
v2: macroize check_user_mbz()
v3: Cancel virtual engines on wedging
v4: Commence commenting
v5: Replace 64b sibling_mask with a list of class:instance
v6: Drop the one-element array in the uabi
v7: Assert it is an virtual engine in to_virtual_engine()
v8: Skip over holes in [class][inst] so we can selftest with (vcs0, vcs2)
Link: https://github.com/intel/media-driver/pull/283
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190521211134.16117-6-chris@chris-wilson.co.uk
A usecase arose out of handling context recovery in mesa, whereby they
wish to recreate a context with fresh logical state but preserving all
other details of the original. Currently, they create a new context and
iterate over which bits they want to copy across, but it would much more
convenient if they were able to just pass in a target context to clone
during creation. This essentially extends the setparam during creation
to pull the details from a target context instead of the user supplied
parameters.
The ideal here is that we don't expose control over anything more than
can be obtained via CONTEXT_PARAM. That is userspace retains explicit
control over all features, and this api is just convenience.
For example, you could replace
struct context_param p = { .param = CONTEXT_PARAM_VM };
param.ctx_id = old_id;
gem_context_get_param(&p.param);
new_id = gem_context_create();
param.ctx_id = new_id;
gem_context_set_param(&p.param);
gem_vm_destroy(param.value); /* drop the ref to VM_ID handle */
with
struct create_ext_param p = {
{ .name = CONTEXT_CREATE_CLONE },
.clone_id = old_id,
.flags = CLONE_FLAGS_VM
}
new_id = gem_context_create_ext(&p);
and not have to worry about stray namespace pollution etc.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190521211134.16117-5-chris@chris-wilson.co.uk
The SINGLE_TIMELINE flag can be used to create a context such that all
engine instances within that context share a common timeline. This can
be useful for mixing operations between real and virtual engines, or
when using a composite context for a single client API context.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190521211134.16117-4-chris@chris-wilson.co.uk
Allow the user to specify a local engine index (as opposed to
class:index) that they can use to refer to a preset engine inside the
ctx->engine[] array defined by an earlier I915_CONTEXT_PARAM_ENGINES.
This will be useful for setting SSEU parameters on virtual engines that
are local to the context and do not have a valid global class:instance
lookup.
Note that due to the ambiguity in using class:instance with
ctx->engines[], if a user supplied engine map is active the user must
specify the engine to alter by its index into the ctx->engines[].
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190521211134.16117-3-chris@chris-wilson.co.uk
Over the last few years, we have debated how to extend the user API to
support an increase in the number of engines, that may be sparse and
even be heterogeneous within a class (not all video decoders created
equal). We settled on using (class, instance) tuples to identify a
specific engine, with an API for the user to construct a map of engines
to capabilities. Into this picture, we then add a challenge of virtual
engines; one user engine that maps behind the scenes to any number of
physical engines. To keep it general, we want the user to have full
control over that mapping. To that end, we allow the user to constrain a
context to define the set of engines that it can access, order fully
controlled by the user via (class, instance). With such precise control
in context setup, we can continue to use the existing execbuf uABI of
specifying a single index; only now it doesn't automagically map onto
the engines, it uses the user defined engine map from the context.
v2: Fixup freeing of local on success of get_engines()
v3: Allow empty engines[]
v4: s/nengine/num_engines/
v5: Replace 64 limit on num_engines with a note that execbuf is
currently limited to only using the first 64 engines.
v6: Actually use the engines_mutex to guard the ctx->engines.
Testcase: igt/gem_ctx_engines
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190521211134.16117-2-chris@chris-wilson.co.uk
Having hid the partially exposed new ABI from the PR, put it back again
for completion of context recovery. A significant part of context
recovery is the ability to reuse as much of the old context as is
feasible (to avoid expensive reconstruction). The biggest chunk kept
hidden at the moment is fine-control over the ctx->ppgtt (the GPU page
tables and associated translation tables and kernel maps), so make
control over the ctx->ppgtt explicit.
This allows userspace to create and share virtual memory address spaces
(within the limits of a single fd) between contexts they own, along with
the ability to query the contexts for the vm state.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190521211134.16117-1-chris@chris-wilson.co.uk
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
"ret" is uninitialized on this path but it should be -EINVAL.
Fixes: 930c8dfea4 ("drm/i915/gvt: Check if get_next_pt_type() always returns a valid value")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
the vGPU write on TRTTE and 0x4dfc is now write to vreg first. their
values all be restored hardware when context switching.
Fixes: e39c5add32 ("drm/i915/gvt: vGPU MMIO virtualization")
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
0x4dfc is in-context mmio for gen9+, but each vm have different settings
need to add it to save-restore list along with other trtt registers
Fixes: 1786571393 ("drm/i915/gvt: vGPU context switch")
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
for restore-inhibit context, hardware will not load in-context mmios
(engine context part) to hardware, but hardware will save the mmio
values in hardware back to context image. So, in order to save correct
values of vGPU back to context image, values of vGPU mmios have to be
loaded into hardware first for restore-inhibit context.
In this patch, the mechanism is applied to all gen9 platform.
The reason excluding gen8 platforms is only because of lacking of testing
on those platforms.
v3: for mocs registers, goto in-context mmios save-restore path for skl
platform as well (weinan li)
v2: update vreg when scanning indirect context for inhibit context for
gen9
Cc: Weinan Li <weinan.z.li@intel.com>
Acked-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
"To track whether a request has started on HW, we can emit a breadcrumb at
the beginning of the request and check its timeline's HWSP to see if the
breadcrumb has advanced past the start of this request." It means all the
request which timeline's has_init_breadcrumb is true, then the
emit_init_breadcrumb process must have before emitting the real commands,
otherwise, the scheduler might get a wrong state of this request during
reset. If the request is exactly the guilty one, the scheduler won't
terminate it with the wrong state. To avoid this, do emit_init_breadcrumb
for all the requests from gvt.
v2: cc to stable kernel
Fixes: 8547444137 ("drm/i915: Identify active requests")
Cc: stable@vger.kernel.org
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Weinan <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
In commit b7404c7ecb ("drm/i915: Bump ready tasks ahead of
busywaits"), I tried cutting a corner in order to not install a signal
for each of our dependencies, and only listened to requests on which we
were intending to busywait. The compromise that was made was that
instead of then being able to promote the request with a full
NOSEMAPHORE like its non-busywaiting brethren, as we had not ensured we
had cleared the semaphore chain, we settled for only using the NEWCLIENT
boost. With an over saturated system with multiple NEWCLIENTS in flight
at any time, this was found to be an inadequate promotion and left us
with a much poorer scheduling order than prior to using semaphores.
The outcome of this patch, is that all requests have NOSEMAPHORE
priority when they have no dependencies and are ready to run and not
busywait, restoring the pre-semaphore ordering on saturated systems.
We can demonstrate the effect of poor scheduling order by oversaturating
the system using gem_wsim on a system with multiple vcs engines
(i.e running the same workloads across more clients than required for
peak throughput, e.g. media_load_balance_17i7.wsim -c4 -b context):
x v5.1 (normalized)
+ tip
* fix
+------------------------------------------------------------------------+
| x |
| x |
| x |
| x |
| %x |
| %%x |
| %%x |
| %%x |
| %%x |
| %%x |
| %%x |
| %%x |
| %%x |
| %%x |
| %%x |
| %#x |
| %#x |
| %#x |
| %#x |
| %#x |
| + %#xx |
| + %#xx |
| + %%#xx |
| + %%#xx |
| + %%#xx |
| + %%#xx |
| + %%##x |
| +++ %%##x |
| +++ %%##x |
| +++ %%##x |
| ++++ %%##x |
| ++++ %%##x |
| ++++ %%##xx |
| ++++ %###xx |
| ++++ %###xx |
| ++++ %###xx |
| ++++ %###xx |
| ++++ + %#O#xx |
| ++++ + %#O#xx |
| ++++++ + %#O#xx |
| ++++++++++ %OOOxxx|
| ++++++++++ + %#OOO#xx|
| + ++++++++++++ ++ +++++ + ++ @@OOOO#xx|
| |A_| |
||__________M_______A____________________| |
| |A_| |
+------------------------------------------------------------------------+
N Min Max Median Avg Stddev
x 120 0.99456 1.00628 0.999985 1.0001545 0.0024387139
+ 120 0.873021 1.00037 0.884134 0.90148752 0.039190862
Difference at 99.5% confidence
-0.098667 +/- 0.0110762
-9.86517% +/- 1.10745%
(Student's t, pooled s = 0.0277657)
% 120 0.990207 1.00165 0.9970265 0.99699748 0.0021024
Difference at 99.5% confidence
-0.003157 +/- 0.000908245
-0.315651% +/- 0.0908105%
(Student's t, pooled s = 0.00227678)
Fixes: b7404c7ecb ("drm/i915: Bump ready tasks ahead of busywaits")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Cc: Dmitry Ermilov <dmitry.ermilov@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190515130052.4475-2-chris@chris-wilson.co.uk
(cherry picked from commit 17db337f50)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Commit 1413b2bc07 ("drm/i915: Trim NEWCLIENT boosting") had the
intended consequence of not allowing a sequence of work that merely
crossed into a new engine the privilege to be promoted to NEWCLIENT
status. It also had the unintended consequence of actually making
NEWCLIENT effective on heavily oversubscribed transcode machines and
impacting upon their throughput.
If we consider a client packet composed of (rcsA, rcsB, vcs) and 30 of
those clients, using the NEWCLIENT boost that will be scheduled as
rcsA x 30, (rcsB, vcs) x 30
where as before it would have been
(rcsA, rcsB, vcs) x 30
That is with NEWCLIENT only boosting the first request of each client,
we would execute all rcsA requests prior to running on the vcs engines;
acruing a lot of dead time as compared to the previous case where the
vcs engine would be started in parallel to processing the second client.
The previous patch has the effect of delaying submission until it is
required by a third party (either the user with an explicit wait, or by
another client/engine). We reduce the NEWCLIENT bump to a mere WAIT,
which has the effect of removing its preemptive grant and reducing it to
the same level as any other user interaction -- that it will not be
promoted above the interengine dependencies, and so preventing NEWCLIENTS
from starving other engines. This a large nerf to the rrul properties of
the current NEWCLIENT, but it still does give prioritised submission to
new requests from light workloads.
References: b16c765122 ("drm/i915: Priority boost for new clients")
Fixes: 1413b2bc07 ("drm/i915: Trim NEWCLIENT boosting") # customer impact
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Cc: Dmitry Ermilov <dmitry.ermilov@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190515130052.4475-4-chris@chris-wilson.co.uk
(cherry picked from commit 68fc728b01)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The handling of the no-preemption priority level imposes the restriction
that we need to maintain the implied ordering even though preemption is
disabled. Otherwise we may end up with an AB-BA deadlock across multiple
engine due to a real preemption event reordering the no-preemption
WAITs. To resolve this issue we currently promote all requests to WAIT
on unsubmission, however this interferes with the timeslicing
requirement that we do not apply any implicit promotion that will defeat
the round-robin timeslice list. (If we automatically promote the active
request it will go back to the head of the queue and not the tail!)
So we need implicit promotion to prevent reordering around semaphores
where we are not allowed to preempt, and we must avoid implicit
promotion on unsubmission. So instead of at unsubmit, if we apply that
implicit promotion on adding the dependency, we avoid the semaphore
deadlock and we also reduce the gains made by the promotion for user
space waiting. Furthermore, by keeping the earlier dependencies at a
higher level, we reduce the search space for timeslicing without
altering runtime scheduling too badly (no dependencies at all will be
assigned a higher priority for rrul).
v2: Limit the bump to external edges (as originally intended) i.e.
between contexts and out to the user.
Testcase: igt/gem_concurrent_blit
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190515130052.4475-3-chris@chris-wilson.co.uk
(cherry picked from commit 6e7eb7a807)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Sean Paul