Commit Graph

9 Commits

Author SHA1 Message Date
Liav Rehana 28923f6b74 ARC: [plat-eznps] handle extra aux regs #2: kernel/entry exit
Preserve eflags and gpa1 aux during entry/exit into kernel as these
could be modified by kernel mode

These registers used by compare exchange instructions.
  - GPA1 is used for compare value,
  - EFLAGS got bit reflects atomic operation response.

EFLAGS is zeroed for each new user task so it won't get its
parent value.

Signed-off-by: Liav Rehana <liavr@mellanox.com>
Signed-off-by: Noam Camus <noamc@ezchip.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-08-28 15:17:36 -07:00
Andrea Gelmini 2547476a5e Fix typos
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-30 10:07:32 +05:30
Noam Camus 86c25466f7 ARC: [plat-eznps] Use dedicated identity auxiliary register.
With generic "identity" num of CPUs is limited to 256 (8 bit).
We use our alternative AUX register GLOBAL_ID (12 bit).
Now we can support up to 4096 CPUs.

Signed-off-by: Noam Camus <noamc@ezchip.com>
2016-05-09 09:32:33 +05:30
Adam Buchbinder 7423cc0cae ARC: Fix misspellings in comments.
Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-03-11 14:59:53 +05:30
Vineet Gupta 55a2ae775a ARC: [arcompact] entry.S: Improve early return from exception
The requirement is to
 - Reenable Exceptions (AE cleared)
 - Reenable Interrupts (E1/E2 set)

We need to do wiggle these bits into ERSTATUS and call RTIE.

Prev version used the pre-exception STATUS32 as starting point for what
goes into ERSTATUS. This required explicit fixups of U/DE/L bits.

Instead, use the current (in-exception) STATUS32 as starting point.
Being in exception handler U/DE/L can be safely assumed to be correct.
Only AE/E1/E2 need to be fixed.

So the new implementation is slightly better
 -Avoids read form memory
 -Is 4 bytes smaller for the typical 1 level of intr configuration
 -Depicts the semantics more clearly

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-10-17 17:48:22 +05:30
Vineet Gupta 5793e273a1 ARC: intc: split into ARCompact ISA specific, common bits
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19 18:09:40 +05:30
Vineet Gupta 5a343b9fe2 ARC: entry.S: [arcompact] simplify SWITCH_TO_KERNEL_STK
Previously this macro was overloaded with stack switching, saving SP at right
slot in pt_regs, saving/setup of r25 and setting SP baseline to where
pt_regs->sp is saved (vs. bottom of pt_regs)

Now it only does SP switch, and leaves SP pointing to bottom of pt_regs.

r25 saving is no longer done here to allow for future reordering of
regfile in pt_regs w/o touching this macro

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19 18:09:40 +05:30
Vineet Gupta 62fb64034d ARC: entry.S: micro-optimize Trap handler
Elide the need to re-read ECR in Trap handler by ensuring that
EXCEPTION_PROLOGUE does that at the very end just before returning
to Trap handler

ARCv2 EXCEPTION_PROLOGUE already did that, so same for ARcompact and the
common trap handler adjusted to use cached ECR

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19 18:09:39 +05:30
Vineet Gupta 6d1a20b1d2 ARC: entry.S: split into ARCompact ISA specific, common bits
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19 18:09:38 +05:30