Commit Graph

1012 Commits

Author SHA1 Message Date
Paul Mundt 20c2df83d2 mm: Remove slab destructors from kmem_cache_create().
Slab destructors were no longer supported after Christoph's
c59def9f22 change. They've been
BUGs for both slab and slub, and slob never supported them
either.

This rips out support for the dtor pointer from kmem_cache_create()
completely and fixes up every single callsite in the kernel (there were
about 224, not including the slab allocator definitions themselves,
or the documentation references).

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20 10:11:58 +09:00
Kristoffer Ericson e509ac4bbc sh: sh-rtc support for SH7709.
Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-16 09:51:39 +09:00
Paul Mundt 2b1bd1ac5d sh: Preliminary support for the SH-X3 CPU.
This adds basic support for UP SH-X3.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-20 18:27:10 +09:00
Paul Mundt 027e56e685 sh: Hook up hard_smp_processor_id() for INTC2 block.
We need to know the CPU ID in order to calculate the mask and ack
registers effectively. Stub this in for UP.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-20 18:23:49 +09:00
Magnus Damm 68abdbbb03 sh: rework ipr code
This patch reworks the ipr code by grouping the offset array together
with the ipr_data structure in a new data structure called ipr_desc.
This new structure also contains the name of the controller in struct
irq_chip. The idea behind putting struct irq_chip in there is that we
can use offsetof() to locate the base addresses in the irq_chip
callbacks. This strategy has much in common with the recently merged
intc2 code.

One logic change has been made - the original ipr code enabled the
interrupts by default but with this patch they are all disabled by
default.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-15 18:56:19 +09:00
Magnus Damm d619500aed sh: rework intc2 code
The shared intc2 code currently contains cpu-specific #ifdefs.
This is a tad unclean and it prevents us from using the shared code
to drive board-specific irqs on the se7780 board.

This patch reworks the intc2 code by moving the base addresses of
the intc2 registers into struct intc2_desc. This new structure also
contains the name of the controller in struct irq_chip. The idea
behind putting struct irq_chip in there is that we can use offsetof()
to locate the base addresses in the irq_chip callbacks.

One logic change has been made - the original shared intc2 code
enabled the interrupts by default but with this patch they are all
disabled by default.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-15 10:41:54 +09:00
Paul Mundt 9f9a5de466 sh: Fixup misaligned data for sh2 lockdep.
lockdep/irqflags tracing on SH-2 ends up with a misaligned
branch, fix it.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-11 15:33:44 +09:00
Paul Mundt 357d59469c sh: Tidy up dependencies for SH-2 build.
SH-2 can presently get in to some pretty bogus states, so
we tidy up the dependencies a bit and get it all building
again.

This gets us a bit closer to a functional allyesconfig
and allmodconfig, though there are still a few things to
fix up.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-11 15:32:07 +09:00
Paul Mundt b9601c5e59 sh: Kill off dead SH7604 support.
This was added during 2.5.x, but was never moved along. This
can easily be resurrected if someone has one they wish to work
with, but it's not worth keeping around in its current form.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08 11:55:28 +09:00
Paul Mundt 5bbeafca8d sh: Fix the SH7722 flatmem build.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08 02:43:50 +00:00
Paul Mundt 520588f47f sh: URAM node support for SH7722.
This adds the URAM block on SH7722 as a separate node.
Sparsemem is required for this, or it can simply be disabled
by explicitly selecting a flatmem model.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08 02:43:49 +00:00
Paul Mundt 05627486ab sh: Fix SH-4 CPU selects.
Now that select no longer works for selecting the "closest" CPU,
we have to explicitly reference the precise sub-type in the few
places where it actually matters (presently only setup code and
some legacy sh-sci cruft).

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08 02:43:40 +00:00
Paul Mundt 907c9d7004 sh: Fix SH4-202 clock fwk set_rate() mismatch.
With the SH7722 changes, ->set_rate() also takes an algo_id,
SH4-202 was overlooked when this change went in.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-04 10:51:59 +09:00
Paul Mundt c596b1a380 sh: Fix in_nmi symbol build error.
If CONFIG_KGDB_NMI is disabled, we're left with a stray in_nmi
reference that can't be resolved. Move the symbol under the ifdef,
too.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-04 10:39:50 +09:00
Evgeniy Polyakov 66c5227ecd sh: trivial build cleanups.
Several errors were spotted during building for custom config (SMP
included). Although SMP still does not compile (no ipi and
__smp_call_function) and does not work, this looks a bit cleaner.
Some other errors obtained via gcc-4.1.0 build.

Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-31 13:46:21 +09:00
Takashi YOSHII 370ac91aab sh: Fix pcrel too far for in_nmi label.
Add lost in_nmi definition to solve pcrel too far.

Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-31 13:42:21 +09:00
dmitry pervushin dfbbbe9295 sh: Fix clock multiplier on SH7722.
This fixes up the master clock multiplier and initial rate
propagation for the SH7722 clocks.

Signed-off-by: dmitry pervushin <dimka@nomadgs.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-21 14:34:45 +09:00
Paul Mundt 27641dee99 sh: Fix up various compile warnings for SE boards.
- setup-sh7750.c only defines the sh7751_ipr_map when building
  with SH7751 support.

- 7722 Solution Engine was missing a mach-type entry, causing
  the macro in cf-enabler to be undefined.

- arch/sh/mm/init.c needs linux/pagemap.h.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-21 14:32:47 +09:00
Simon Arlott e868d61272 spelling fixes: arch/sh/
Spelling fixes in arch/sh/.

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-21 14:31:39 +09:00
Linus Torvalds d84c4124c4 Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: Fix stacktrace simplification fallout.
  sh: SH7760 DMABRG support.
  sh: clockevent/clocksource/hrtimers/nohz TMU support.
  sh: Truncate MAX_ACTIVE_REGIONS for the common case.
  rtc: rtc-sh: Fix rtc_dev pointer for rtc_update_irq().
  sh: Convert to common die chain.
  sh: Wire up utimensat syscall.
  sh: landisk mv_nr_irqs definition.
  sh: Fixup ndelay() xloops calculation for alternate HZ.
  sh: Add 32-bit opcode feature CPU flag.
  sh: Fix PC adjustments for varying opcode length.
  sh: Support for SH-2A 32-bit opcodes.
  sh: Kill off redundant __div64_32 symbol export.
  sh: Share exception vector table for SH-3/4.
  sh: Always define TRAPA_BUG_OPCODE.
  sh: __GFP_REPEAT for pte allocations, too.
  rtc: rtc-sh: Fix up dev_dbg() warnings.
  sh: generic quicklist support.
2007-05-09 13:08:20 -07:00
Uwe Kleine-König 5886269962 fix file specification in comments
Many files include the filename at the beginning, serveral used a wrong one.

Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-05-09 08:58:16 +02:00
Paul Mundt 074f98df05 sh: Add 32-bit opcode feature CPU flag.
Add a CPU flag for the CPUs that support 32-bit opcodes, which
gets passed down to userspace.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-09 01:35:01 +00:00
Paul Mundt 53f983a90d sh: Fix PC adjustments for varying opcode length.
There are a few different cases for figuring out how to
size the instruction. We read in the instruction located
at regs->pc - 4 when rewinding the opcode to figure out if
there's a 32-bit opcode before the faulting instruction, with
a default of a - 2 adjustment on a mismatch. In practice this
works for the cases where pc - 4 is just another 16-bit opcode,
or we happen to have a 32-bit and a 16-bit immediately
preceeding the pc value.

In the cases where we aren't rewinding, this is much less ugly..

We also don't bother fixing up the places where we're explicitly
dealing with 16-bit instructions, since this might lead to
confusion regarding the encoding size possibilities on other
CPU variants.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-09 01:35:01 +00:00
Paul Mundt bd0799977c sh: Support for SH-2A 32-bit opcodes.
SH-2A supports both 16 and 32-bit instructions, add a simple helper
for figuring out the instruction size in the places where there are
hardcoded 16-bit assumptions.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-09 01:35:01 +00:00
Paul Mundt 00bf0610e4 sh: Share exception vector table for SH-3/4.
The only difference between these at the moment are the FPU
exceptions, and these are hidden away under CONFIG_SH_FPU
(which is only set for the SH-4 case anyways..).

This consolidates the two tables, and updates SH-4 to use
the updated copy.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-09 01:35:01 +00:00
Ryusuke Sakato 39374aadcd sh: R7785RP board updates.
Some fixups for the R7785RP board. Gets iVDR working.

Signed-off-by: Ryusuke Sakato <sakato.ryusuke@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:11:57 +00:00
Takashi YOSHII 70fe4d87bf sh: Wire up more IRQs for SH7709.
hp6xx requires some additional IRQs that aren't currently enabled in
the SH7709 setup code. Wire them up.

Signed-off-by: Takashi YOSHII <takashi.yoshii.ze@hitachi.com>
Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:11:57 +00:00
Paul Mundt db62e5bd29 sh: Move clock reporting to its own proc entry.
Previously this was done in cpuinfo, but with the number of clocks
growing, it makes more sense to place this in a different proc entry.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:11:56 +00:00
Nobuhiro Iwamatsu 2a8ff4596c sh: Solution Engine SH7705 board and CPU updates.
This fixes up SH7705 CPU support and the SE7705 board
for some of the recent changes.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.zh@hitachi.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:11:56 +00:00
dmitry pervushin 1929cb340b sh: SH7722 clock framework support.
This adds support for the SH7722 (MobileR) to the clock framework.

Signed-off-by: dmitry pervushin <dimka@nomadgs.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:11:56 +00:00
Nobuhiro Iwamatsu 9465a54fa4 sh: MS7712SE01 board support.
Support the SH7712 (SH3-DSP) Solution Engine reference board.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:10:54 +00:00
Paul Mundt 32351a28a7 sh: Add SH7785 Highlander board support (R7785RP).
This adds preliminary support for the SH7785-based Highlander board.
Some of the Highlander support code is reordered so that most of it
can be reused directly.

This also plugs in missing SH7785 checks in the places that need it,
as this is the first board to support the CPU.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:10:53 +00:00
Paul Mundt 45ed285b54 sh: speculative execution support for SH7780.
SH7780 has a speculative execution mode where it can speculatively
perform an instruction fetch for subroutine returns, this allows it
to be enabled. There are some various pitfalls associated with this
mode, so it's left as depending on CONFIG_EXPERIMENTAL and not
enabled by default.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:10:51 +00:00
Paul Mundt 3afb209a43 sh: Fix bogus regs pointer in do_IRQ().
SH-3 and SH-4 were trampling the register, and SH-2 wasn't even
setting it in the first place. This ended up with some rather
broken behaviour in the sysrq show_regs().

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-03-14 13:03:35 +09:00
Paul Mundt ffe1b4e9f4 sh: Fix SH-3 cache entry_mask and way_size calculation.
The code for performing the calculation was only in the SH-4 probe
path, move it out to the common path so the other parts get this
right too.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-03-12 16:15:22 +09:00
Tobias Klauser c5a69d57eb Storage class should be before const qualifier
The C99 specification states in section 6.11.5:

The placement of a storage-class specifier other than at the
beginning of the declaration specifiers in a declaration is an
obsolescent feature.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-17 20:11:19 +01:00
Paul Mundt 9c57548f17 sh: rts7751r2d board updates.
This tidies up some of the rts7751r2d mess and gets it booting
again. Update the defconfig, too.

Signed-off-by: Masayuki Hosokawa <hosokawa@ace-jp.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-15 18:20:52 +09:00
Paul Mundt db2e1fa3f0 sh: Revert TLB miss fast-path changes that broke PTEA parts.
This ended up causing problems for older parts (particularly ones
using PTEA). Revert this for now, it can be added back in once it's
had some more testing.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-14 14:13:10 +09:00
Paul Mundt 11c1965687 sh: Fixup cpu_data references for the non-boot CPUs.
There are a lot of bogus cpu_data-> references that only end up working
for the boot CPU, convert these to current_cpu_data to fixup SMP.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:45 +09:00
Paul Mundt aec5e0e1c1 sh: Use a per-cpu ASID cache.
Previously this was implemented using a global cache, cache
this per-CPU instead and bump up the number of context IDs to
match NR_CPUS.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:45 +09:00
Manuel Lauss 9f8a5e3a44 sh: SH-DMAC compile fixes
This patch does the following:
- remove the make_ipr_irq stuff from dma-sh.c and replace it
  with a simple channel<->irq mapping table.
- add DMTEx_IRQ constants for sh4 cpus
- fix sh7751 DMAE irq number

The SH7780 uses the same IRQs for DMA as other SH4 types, so
I put the constants on top of the dma.h file.

Other CPU types need to #define their own DMTEx_IRQ contants
in their appropriate header.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:45 +09:00
Manuel Lauss 6dcda6f1ec sh: add SH7760 IPR IRQ data
Add SH7760 IPR IRQ data; makes 2.6.20-rc bootable again.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:45 +09:00
Paul Mundt 26b7a78c55 sh: Lazy dcache writeback optimizations.
This converts the lazy dcache handling to the model described in
Documentation/cachetlb.txt and drops the ptep_get_and_clear() hacks
used for the aliasing dcaches on SH-4 and SH7705 in 32kB mode. As a
bonus, this slightly cuts down on the cache flushing frequency.

With that and the PTEA handling out of the way, the update_mmu_cache()
implementations can be consolidated, and we no longer have to worry
about which configuration the cache is in for the SH7705 case.

And finally, explicitly disable the lazy writeback on SMP (SH-4A).

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:44 +09:00
Paul Mundt 7a847f8190 sh: More tidying for large base pages.
There were a few more things that needed fixing up, namely THREAD_SIZE
and the TLB miss handler where certain PTRS_PER_PGD == PTRS_PER_PTE
assumptions were being made.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:44 +09:00
Takashi YOSHII f725b5ee1e sh: shmin updates.
This fixes up shmin (and SH7706/SH7708) IPR support for some of the
recent API changes.

Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:44 +09:00
Yoshinori Sato 5c67cd05e3 sh: sh7619 / sh7206 IPR initialize update
IPR initialize proceduere update.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:43 +09:00
Yoshinori Sato 4aa362bbdd sh: Update SH-2 to use the debug trap jump table.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:43 +09:00
Paul Mundt f413d0d9fa sh: Use a jump call table for debug trap handlers.
This rips out most of the needlessly complicated sh_bios and kgdb
trap handling, and forces it all through a common fast dispatch path.
As more debug traps are inserted, it's important to keep them in sync
for all of the parts, not just SH-3/4.

As the SH-2 parts are unable to do traps in the >= 0x40 range, we
restrict the debug traps to the 0x30-0x3f range on all parts, and
also bump the kgdb breakpoint trap down in to this range (from 0xff
to 0x3c) so it's possible to use for nommu.

Optionally, this table can be padded out to catch spurious traps for
SH-3/4, but we don't do that yet..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:43 +09:00
Yoshinori Sato e9cfc147df sh: Fixup SH-2 BUG() trap handling.
This adds in support for the BUG() trap on SH-2.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12 09:11:45 +09:00
Paul Mundt 05c8690d95 sh: Hook up SH7722 scif ipr interrupts.
Add the SCIF IRQs to the IPR table for SH7722.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12 08:49:06 +09:00
Paul Mundt 41504c3972 sh: SH-MobileR SH7722 CPU support.
This adds CPU support for the SH7722.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12 08:42:09 +09:00
Paul Mundt 37bda1da45 sh: Convert remaining remap_area_pages() users to ioremap_page_range().
A couple of these were missed.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12 08:42:08 +09:00
Yoshinori Sato 780a156888 sh: IPR IRQ updates for SH7619/SH7206.
This updates the SH7619 and SH7206 code for the IPR IRQ changes.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12 08:42:07 +09:00
Jamie Lenehan 417d6b9edb sh: register rtc resources for sh775x.
Register the RTC resources for the sh775x subtype so that the new
generic RTC support in drivers/rtc/rtc-sh.c will work.

Signed-off-by: Jamie Lenehan <lenehan@twibble.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12 08:42:07 +09:00
Christoph Lameter e18b890bb0 [PATCH] slab: remove kmem_cache_t
Replace all uses of kmem_cache_t with struct kmem_cache.

The patch was generated using the following script:

	#!/bin/sh
	#
	# Replace one string by another in all the kernel sources.
	#

	set -e

	for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do
		quilt add $file
		sed -e "1,\$s/$1/$2/g" $file >/tmp/$$
		mv /tmp/$$ $file
		quilt refresh
	done

The script was run like this

	sh replace kmem_cache_t "struct kmem_cache"

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:25 -08:00
Jamie Lenehan ea0f8feaa0 sh: sh775x/titan fixes for irq header changes.
The following moves the creation of IPR interupts into setup-7750.c
and updates a few other things to make it all work after the "Drop
CPU subtype IRQ headers" commit. It boots and runs fine on my titan
board.

 - adds an ipr_idx to the ipr_data and uses a function in the subtype
   code to calculate the address of the IPR registers

 - adds a function to enable individual interrupt mode for externals
   in the subtype code and calls that from the titan board code
   instead of doing it directly.

 - I changed the shift in the ipr_data to be the actual # of bits to
   shift, instead of the numnber / 4 - made it easier to match with
   the manual.

Signed-off-by: Jamie Lenehan <lenehan@twibble.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 12:05:02 +09:00
Paul Mundt afbfb52e47 sh: stacktrace/lockdep/irqflags tracing support.
Wire up all of the essentials for lockdep..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:40 +09:00
Paul Mundt 1d118562c2 sh: Clock framework tidying.
This syncs up the SH clock framework with the linux/clk.h API,
for which there were only some minor changes required, namely
the clk_get() dev_id and subsequent callsites.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:40 +09:00
Paul Mundt 9f650cf2b8 sh: Fix store queue bitmap end.
The end of the store queue bitmap is miscalculated when searching
for a free range in sq_remap(), missing the PAGE_SHIFT shift that's
done in sq_api_init(). This runs in to workloads where we can scan
beyond the end of the bitmap.

Spotted by Paul Jackson:

	http://marc.theaimsgroup.com/?l=linux-kernel&m=116493191224097&w

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:39 +09:00
Paul Mundt 510c72ad2d sh: Fixup various PAGE_SIZE == 4096 assumptions.
There were a number of places that made evil PAGE_SIZE == 4k
assumptions that ended up breaking when trying to play with
8k and 64k page sizes, this fixes those up.

The most significant change is the way we load THREAD_SIZE,
previously this was done via:

	mov	#(THREAD_SIZE >> 8), reg
	shll8	reg

to avoid a memory access and allow the immediate load. With
a 64k PAGE_SIZE, we're out of range for the immediate load
size without resorting to special instructions available in
later ISAs (movi20s and so on). The "workaround" for this is
to bump up the shift to 10 and insert a shll2, which gives a
bit more flexibility while still being much cheaper than a
memory access.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:39 +09:00
Stuart Menefy 9b3a53ab76 sh: TLB miss fast-path optimizations.
Handle simple TLB miss faults which can be resolved completely
from the page table in assembler.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:38 +09:00
Stuart Menefy b5a1bcbee4 sh: Set up correct siginfo structures for page faults.
Remove the previous saving of fault codes into the thread_struct
as they are never used, and appeared to be inherited from x86.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:38 +09:00
Stuart Menefy f0bc814cfb sh: gcc4 support.
This fixes up the kernel for gcc4. The existing exception handlers
needed some wrapping for pt_regs access, acessing the registers
via a RELOC_HIDE() pointer.

The strcpy() issues popped up here too, so add -ffreestanding and
kill off the symbol export.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:38 +09:00
Paul Mundt 9a7ef6d59f sh: Drop CPU subtype IRQ headers.
This drops the various IRQ headers that were floating around
and primarily providing hardcoded IRQ definitions for the
various CPU subtypes. This quickly got to be an unmaintainable
mess, made even more evident by the subtle breakage introduced
by the SH-2 and SH-2A changes.

Now that subtypes are able to register IRQ maps directly, just
rip all of the headers out.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:37 +09:00
Paul Mundt 417528a2e3 sh: Configurable timer IRQ.
All of the various CPU subtypes currently hardcode TIMER_IRQ,
switch this to a config option in the few places we need this.

This allows further removal of hardcoded IRQ headers..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:37 +09:00
Paul Mundt 716067f289 sh: Fixup entry-common path breakage for SH-3.
The nommu patches broke the path for the common bits, get it building
for the SH-3/4 case again.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:37 +09:00
Yoshinori Sato de39840646 sh: Exception vector rework and SH-2/SH-2A support.
This splits out common bits from the existing exception handler for
use between SH-2/SH-2A and SH-3/4, and adds support for the SH-2/2A
exceptions.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:36 +09:00
Yoshinori Sato 9d4436a6fb sh: Add support for SH7206 and SH7619 CPU subtypes.
This implements initial support for the SH7206 (SH-2A) and SH7619
(SH-2) MMU-less CPUs.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:36 +09:00
Jamie Lenehan bd71ab88de sh: Fix IPR-IRQ's for IRQ-chip change breakage.
The conversion from IPR-IRQ to IRQ-chip resulted in the
ipr data being allocated in a local variable in
make_ipr_irq - breaking anything using IPR interrupts.

This changes all of the callers of make_ipr_irq to
allocate a static structure containing the IPR data which
is then passed to make_ipr_irq. This removes the need for
make_ipr_irq to allocate any additional space for the IPR
information.

Signed-off-by: Jamie Lenehan <lenehan@twibble.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-31 12:53:28 +09:00
Paul Mundt 66a740572d sh: Convert INTC2 to IRQ table registration.
Currently the INTC2 code contains a fixed IRQ table that it
iterates through to set the handler type, we move this in to
the CPU subtype setup code instead and allow for submitting
the table that way.

This drops the ST40 tables, as nothing has been happening
with those processors, while converting the only existing
users to use the new table directly (SH7760 and SH7780).

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-20 15:30:55 +09:00
Paul Mundt 709bc44c31 sh: Updates for irq-flow-type naming changes.
handle_irq_name() and set_irq_chip_and_handler() disappeared,
update for desc->name and set_irq_chip_and_handler_name() use.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-19 17:32:56 +09:00
Paul Mundt 1f666587db sh: Fix exception_handling_table alignment.
With the recent change ripping out interrupt_table, explicit
padding of the table was missing, causing bad things to happen
when manually inserting handlers in to the table. This problem
particularly showed up in relation to do_fpu_state_restore()
which was inserted quite deeply in to the table and ended up
scribbling over a slab object.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-19 16:30:32 +09:00
Paul Mundt baf4326e49 sh: interrupt exception handling rework
Kill off interrupt_table for all of the CPU subtypes, we now
default in to stepping in to do_IRQ() for _all_ IRQ exceptions
and counting the spurious ones, rather than simply flipping on
the ones we cared about. This and enabling the IRQ by default
automatically has already uncovered a couple of bugs and IRQs
that weren't being caught, as well as some that are being
generated far too often (SCI Tx Data Empty, for example).

The general rationale is to use a marker for interrupt exceptions,
test for it in the handle_exception() path, and skip out to
do_IRQ() if it's found. Everything else follows the same behaviour
of finding the cached EXPEVT value in r2/r2_bank, we just rip out
the INTEVT read from entry.S entirely (except for in the kGDB NMI
case, which is another matter).

Note that while this changes the do_IRQ() semantics regarding r4
handling, they were fundamentally broken anyways (relying entirely
on r2_bank for the cached code). With this, we do the INTEVT read
from do_IRQ() itself (in the CONFIG_CPU_HAS_INTEVT case), or fall
back on r4 for the muxed IRQ number, which should also be closer
to what SH-2 and SH-2A want anyways.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-12 12:03:04 +09:00
Paul Mundt 0f13804ae9 sh: Convert IPR-IRQ to IRQ chip.
One more initial conversion..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-06 17:55:25 +09:00
Paul Mundt 525ccc452c sh: Convert INTC2 IRQ handler to irq_chip.
More struct irq_chip conversions, this time the INTC2 handlers.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-06 17:35:48 +09:00
Uwe Zeisberger f30c226954 fix file specification in comments
Many files include the filename at the beginning, serveral used a wrong one.

Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03 23:01:26 +02:00
Paul Mundt f3c2575818 sh: Calculate shm alignment at runtime.
Set the SHM alignment at runtime, based off of probed cache desc.
Optimize get_unmapped_area() to only colour align shared mappings.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 18:36:17 +09:00
Paul Mundt d15f456043 sh: More intelligent entry_mask/way_size calculation.
Figure out the cache desc entry_mask at runtime, and remove
hard-coded assumption about the cacheline size.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 18:28:34 +09:00
Paul Mundt 72c35543f8 sh: Support for L2 cache on newer SH-4A CPUs.
This implements preliminary support for the L2 caches found
on newer SH-4A CPUs.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 18:27:43 +09:00
Paul Mundt 315bb96824 sh: CPU flags in AT_HWCAP in ELF auxvt.
Encode processor flags in AT_HWCAP in the ELF auxiliary vector.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 18:22:53 +09:00
Paul Mundt a6a3113989 sh: Add support for 4K stacks.
This enables support for 4K stacks on SH.

Currently this depends on DEBUG_KERNEL, but likely all boards
will switch to this as the default in the future.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 18:22:14 +09:00
Paul Mundt 8599cf0592 sh: Cleanup IRQ disabling for hardirq handlers.
The generic hardirq layer already takes care of a lot of the
appropriate locking and disabling for us, no need to duplicate
it in the handlers..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 18:03:34 +09:00
Paul Mundt ba463937ef sh: maskreg IRQ support.
Formerly implemented by ADX, we can use this generically,
so move it over.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 18:01:16 +09:00
Paul Mundt 91550f715b sh: Kill off the rest of the legacy rtc mess.
With the new RTC class driver, we can get rid of most of the
old left over cruft.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 17:45:01 +09:00
Paul Mundt e5723e0eeb sh: Add support for SH7706/SH7710/SH7343 CPUs.
This adds support for the aforementioned CPU subtypes, and cleans
up some build issues encountered as a result.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 17:38:11 +09:00
Paul Mundt 7dec62e96b sh: Add setup code for various CPU subtypes.
This adds some simple setup code for most of the CPU subtypes,
primarily simple platform device registration.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 17:30:35 +09:00
Paul Mundt 237b98f61d sh: sem2mutex conversion for clock framework.
Simple sem2mutex conversion.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 17:28:20 +09:00
Paul Mundt 959f85f8a3 sh: Consolidated SH7751/SH7780 PCI support.
This cleans up quite a lot of the PCI mess that we
currently have, and attempts to consolidate the
duplication in the SH7780 and SH7751 PCI controllers.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 16:43:28 +09:00
Paul Mundt 5283ecb5cc sh: Add support for R7780RP and R7780MP boards.
This adds support for the Renesas SH7780 development boards,
R7780RP and R7780MP.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 15:59:17 +09:00
Paul Mundt d7c30c682a sh: Store Queue API rework.
Rewrite the store queue API for a per-cpu interface in the driver
model. The old miscdevice is dropped, due to TASK_SIZE limitations,
and no one was using it anyways.

Carve up and allocate store queue space with a bitmap, back sq
mapping objects with a slab cache, and let userspace worry about
its own prefetching.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 15:49:57 +09:00
Paul Mundt 749cf48692 sh: Add flag for MMU PTEA capability.
Add CPU_HAS_PTEA, refactor some of the cpu flag settings.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 14:55:41 +09:00
Paul Mundt 5b19c9081f sh: Support for SH7770/SH7780 CPU subtypes.
Merge support for SH7770 and SH7780 SH-4A subtypes.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 14:31:40 +09:00
Paul Mundt 73388cc7c6 sh: Refactor PRR masking to catch newer SH7760 cuts.
Newer SH7760 cuts have a range of acceptable PRR values..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 14:11:33 +09:00
Richard Curnow b638d0b921 sh: Optimized cache handling for SH-4/SH-4A caches.
This reworks some of the SH-4 cache handling code to more easily
accomodate newer-style caches (particularly for the > direct-mapped
case), as well as optimizing some of the old code.

Signed-off-by: Richard Curnow <richard.curnow@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 14:09:26 +09:00
Paul Mundt e4c2cfee5d sh: Various cosmetic cleanups.
We had quite a bit of whitespace damage, clean most of it up..

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Arthur Othieno <a.othieno@bluewin.ch>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 12:31:01 +09:00
Neil Horman 757be18612 [PATCH] sh: fix proc file removal for superh store queue module
Clean up proc file removal in sq module for superh arch.  currently on a
failed module load or on module unload a proc file is left registered which
can cause a random memory execution or oopses if read after unload.  This
patch cleans up that deregistration.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-06 08:57:48 -07:00
Jörn Engel 6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Linus Torvalds 602cada851 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/devfs-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/devfs-2.6: (22 commits)
  [PATCH] devfs: Remove it from the feature_removal.txt file
  [PATCH] devfs: Last little devfs cleanups throughout the kernel tree.
  [PATCH] devfs: Rename TTY_DRIVER_NO_DEVFS to TTY_DRIVER_DYNAMIC_DEV
  [PATCH] devfs: Remove the tty_driver devfs_name field as it's no longer needed
  [PATCH] devfs: Remove the line_driver devfs_name field as it's no longer needed
  [PATCH] devfs: Remove the videodevice devfs_name field as it's no longer needed
  [PATCH] devfs: Remove the gendisk devfs_name field as it's no longer needed
  [PATCH] devfs: Remove the miscdevice devfs_name field as it's no longer needed
  [PATCH] devfs: Remove the devfs_fs_kernel.h file from the tree
  [PATCH] devfs: Remove devfs_remove() function from the kernel tree
  [PATCH] devfs: Remove devfs_mk_cdev() function from the kernel tree
  [PATCH] devfs: Remove devfs_mk_bdev() function from the kernel tree
  [PATCH] devfs: Remove devfs_mk_symlink() function from the kernel tree
  [PATCH] devfs: Remove devfs_mk_dir() function from the kernel tree
  [PATCH] devfs: Remove devfs_*_tape() functions from the kernel tree
  [PATCH] devfs: Remove devfs support from the sound subsystem
  [PATCH] devfs: Remove devfs support from the ide subsystem.
  [PATCH] devfs: Remove devfs support from the serial subsystem
  [PATCH] devfs: Remove devfs from the init code
  [PATCH] devfs: Remove devfs from the partition code
  ...
2006-06-29 14:19:21 -07:00
Ingo Molnar d1bef4ed5f [PATCH] genirq: rename desc->handler to desc->chip
This patch-queue improves the generic IRQ layer to be truly generic, by adding
various abstractions and features to it, without impacting existing
functionality.

While the queue can be best described as "fix and improve everything in the
generic IRQ layer that we could think of", and thus it consists of many
smaller features and lots of cleanups, the one feature that stands out most is
the new 'irq chip' abstraction.

The irq-chip abstraction is about describing and coding and IRQ controller
driver by mapping its raw hardware capabilities [and quirks, if needed] in a
straightforward way, without having to think about "IRQ flow"
(level/edge/etc.) type of details.

This stands in contrast with the current 'irq-type' model of genirq
architectures, which 'mixes' raw hardware capabilities with 'flow' details.
The patchset supports both types of irq controller designs at once, and
converts i386 and x86_64 to the new irq-chip design.

As a bonus side-effect of the irq-chip approach, chained interrupt controllers
(master/slave PIC constructs, etc.) are now supported by design as well.

The end result of this patchset intends to be simpler architecture-level code
and more consolidation between architectures.

We reused many bits of code and many concepts from Russell King's ARM IRQ
layer, the merging of which was one of the motivations for this patchset.

This patch:

rename desc->handler to desc->chip.

Originally i did not want to do this, because it's a big patch.  But having
both "desc->handler", "desc->handle_irq" and "action->handler" caused a
large degree of confusion and made the code appear alot less clean than it
truly is.

I have also attempted a dual approach as well by introducing a
desc->chip alias - but that just wasnt robust enough and broke
frequently.

So lets get over with this quickly.  The conversion was done automatically
via scripts and converts all the code in the kernel.

This renaming patch is the first one amongst the patches, so that the
remaining patches can stay flexible and can be merged and split up
without having some big monolithic patch act as a merge barrier.

[akpm@osdl.org: build fix]
[akpm@osdl.org: another build fix]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-29 10:26:21 -07:00
Greg Kroah-Hartman 96192ff1a9 [PATCH] devfs: Remove the miscdevice devfs_name field as it's no longer needed
Also fixes all drivers that set this field.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26 12:25:08 -07:00
OGAWA Hirofumi 9b41046cd0 [PATCH] Don't pass boot parameters to argv_init[]
The boot cmdline is parsed in parse_early_param() and
parse_args(,unknown_bootoption).

And __setup() is used in obsolete_checksetup().

	start_kernel()
		-> parse_args()
			-> unknown_bootoption()
				-> obsolete_checksetup()

If __setup()'s callback (->setup_func()) returns 1 in
obsolete_checksetup(), obsolete_checksetup() thinks a parameter was
handled.

If ->setup_func() returns 0, obsolete_checksetup() tries other
->setup_func().  If all ->setup_func() that matched a parameter returns 0,
a parameter is seted to argv_init[].

Then, when runing /sbin/init or init=app, argv_init[] is passed to the app.
If the app doesn't ignore those arguments, it will warning and exit.

This patch fixes a wrong usage of it, however fixes obvious one only.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:53 -08:00
Matt Mackall 4f3a36a7d0 [PATCH] RTC: Remove some duplicate BCD definitions
Remove some duplicate BCD definitions

Signed-off-by: Matt Mackall <mpm@selenic.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 09:16:01 -08:00
Paul Mundt 37cc794378 [PATCH] sh: convert voyagergx to platform device, drop sh-bus
Trivial patch updating the voyagergx cchip code to reference a platform device
instead, now that the dma mask is taken care of.  Given this, there's no
longer any reason to drag around the SH-bus code, so kill that off entirely.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 08:53:20 -08:00
Paul Mundt 8d27e08191 [PATCH] sh: drop maskpos from make_ipr_irq(), remove duplicate irq definitions
Clean up some of the subtype IRQ definitions for IPR IRQ, and consolidate the
make_ipr_irq() definitions by dropping maskpos.  SH-4A was the only thing
interested in the maskpos, and this should be handled through INTC2 rather
than IPR.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 08:53:20 -08:00
Paul Mundt 134ed1420e [PATCH] sh: Make peripheral clock frequency setting mandatory
Pretty much every subtype does this now anyways, and as we depend on it in a
few places being set to something sensible quite early on, it's better for a
new subtype to simply set a sensible default.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 08:53:19 -08:00
Paul Mundt 36ddf31b68 [PATCH] sh: Simplistic clock framework
This adds a relatively simplistic clock framework for sh.  The initial goal
behind this is to clean up the arch/sh/kernel/time.c mess and to get the CPU
subtype-specific frequency setting and calculation code moved somewhere more
sensible.

This only deals with the core clocks at the moment, though it's trivial for
other drivers to define their own clocks as desired.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-16 23:15:28 -08:00
Paul Mundt bf3a00f88c [PATCH] sh: IRQ handler updates
This moves the various IRQ controller drivers into a new subdirectory, and
also extends the INTC2 IRQ handler to also deal with SH7760 and SH7780
interrupts, rather than just ST-40.

The old CONFIG_SH_GENERIC has also been removed from the IRQ definitions, as
new ports are expected to be based off of CONFIG_SH_UNKNOWN.  Since there are
plenty of incompatible machvecs, CONFIG_SH_GENERIC doesn't make sense anymore.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-16 23:15:28 -08:00
Paul Mundt 0d831770b1 [PATCH] sh: DMA updates
This extends the current SH DMA API somewhat to support a proper virtual
channel abstraction, and also works to represent this through the driver model
by giving each DMAC its own platform device.

There's also a few other minor changes to support a few new CPU subtypes, and
make TEI generation for the SH DMAC configurable.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-16 23:15:27 -08:00
Russell King c6a09196ba [PATCH] Add sh_bus_type probe and remove methods
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-13 11:26:06 -08:00
Thomas Gleixner 08d0fd07c3 [PATCH] SH: C99 initializers for hw_interrupt_type structures
Convert the initializers of hw_interrupt_type structures to C99 initializers.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 10:06:27 -07:00
Pavel Machek 3bfffd97ef [PATCH] fix u32 vs. pm_message_t in rest of the tree
This fixes u32 vs.  pm_message_t confusion in remaining places.  Fortunately
there's few of them.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:25:37 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00