Commit Graph

249492 Commits

Author SHA1 Message Date
Emmanuel Grumbach 41c5054266 iwlagn: transport layer receives struct iwl_trans*
It still holds a pointer to iwl_priv. But hopefully this will disappear at some point.
Also add the multiple inclusion protection to iwl-trans.h that was forgotten.
Move iwl-trans structures to iwl-trans.h

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-07-21 07:29:48 -07:00
Emmanuel Grumbach 0286cee0d2 iwlagn: move iwl_prepare_card_hw to the transport layer
This function is really related to the transport layer - move it.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-07-21 07:29:35 -07:00
Emmanuel Grumbach 392f8b789a iwlagn: move more functions from the start flow to the transport layer
Basically all the nic_init flow should be in the transport layer.
iwl_prepare_card_hw will move to the transport too in a separate patch.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-07-21 07:29:22 -07:00
Emmanuel Grumbach 48d42c4269 iwlagn: SCD configuration for AMPDU moves to transport layer
All the configurations of the HW for AMPDU are now in the transport layer.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-07-21 07:29:12 -07:00
Wey-Yi Guy 2e27799621 iwlagn: radio sensor offset in le16 format
For temperature offset calibration, send radio sensor offset in le16 format

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-07-21 07:29:03 -07:00
Wey-Yi Guy ad3f71244c iwlagn: define valid init calibration mask
Use the valid calibration mask for init calibration

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-07-21 07:28:51 -07:00
Wey-Yi Guy a21321c154 iwlagn: remove legacy calibration command
IWL_PHY_CALIBRATE_DIFF_GAIN_CMD is for legacy device, remove it

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-07-21 07:28:35 -07:00
Wey-Yi Guy df2a4dc802 iwlagn: set correct calibration flag
Set calibration config flag for complete notification

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-07-21 07:28:24 -07:00
Emmanuel Grumbach 6bd4dba3d2 iwlagn: kill iwlagn_setup_deferred_work
Since iwlagn_setup_deferred_work is always called, fold it into
iwl_setup_deferred_work. BT related works are setup by the new
bt_setup_deferred_work lib_ops.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.guy@intel.com>
2011-07-21 07:28:03 -07:00
Emmanuel Grumbach 8d30119346 iwlagn: kill iwlagn_rx_handler_setup
Since iwlagn_rx_handler_setup is always called, fold it into
iwl_rx_handler_setup. BT related handlers are setup by the new
bt_rx_handler_setup lib_ops.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.guy@intel.com>
2011-07-21 07:27:55 -07:00
Emmanuel Grumbach 56d90f4c8a iwlagn: add kick_nic API to transport layer
kick_nic means to remove the RESET bit from the embedded CPU

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.guy@intel.com>
2011-07-21 07:27:45 -07:00
Daniel Drake d931998669 libertas: only enable mesh when interface is active
Previously, the mesh was running whenever the appropriate hardware
and firmware was present.

Now we only run the mesh when the interface is running.

Also simplifies interface management a little.

Signed-off-by: Daniel Drake <dsd@laptop.org>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-20 15:04:41 -04:00
Daniel Drake 3db4f98938 libertas: mesh: misc cleanup
Remove unused blindlist code.

Mark a few items const and static where possible. Involved some
code re-ordering, but no code changes.

Signed-off-by: Daniel Drake <dsd@laptop.org>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-20 15:04:40 -04:00
Andy Shevchenko 037b559a16 wireless: mwifiex: print hw address via %pM
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-20 15:04:40 -04:00
Andy Shevchenko 8f895026e8 wireless: ath9k: use %pM to print MAC
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: "Luis R. Rodriguez" <lrodriguez@atheros.com>
Cc: ath9k-devel@lists.ath9k.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-20 15:04:39 -04:00
Andy Shevchenko 1d15b5f2d3 wireless: rtlwifi: throw away MAC_FMT and use %pM instead
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-20 15:04:38 -04:00
Johannes Berg a401d2bb36 cfg80211: fix scan crash on single-band cards
commit 58389c69150e6032504dfcd3edca6b1975c8b5bc
Author: Johannes Berg <johannes.berg@intel.com>
Date:   Mon Jul 18 18:08:35 2011 +0200

     cfg80211: allow userspace to control supported rates in scan

made single-band cards crash since it would always
access all wiphy->bands[]. Fix this and reject any
attempts in the new helper ieee80211_get_ratemask()
to do the same, rejecting rates configuration for
unsupported bands.

Reported-by: Pavel Roskin <proski@gnu.org>
Tested-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-20 15:04:38 -04:00
Pavel Roskin 70126f6105 carl9170: fix sparse warnings enabled by CONFIG_SPARSE_RCU_POINTER
Signed-off-by: Pavel Roskin <proski@gnu.org>
Acked-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-20 15:04:37 -04:00
Eliad Peller 0a557ed3a0 mac80211: check sta_info_get() return value
ieee80211_stop_rx_ba_session() was calling sta_info_get()
without rcu locking, and the return value was not
checked.
This resulted in the following panic:

[<bf05726c>] (ieee80211_stop_rx_ba_session+0x0/0x60 [mac80211])
[<bf0abd94>] (wl1271_event_handle+0x0/0xdc8 [wl12xx])
[<bf0a7308>] (wl1271_irq+0x0/0x4a0 [wl12xx])
[<c00c40a8>] (irq_thread+0x0/0x254)
[<c00a7398>] (kthread+0x0/0x8c)

Signed-off-by: Eliad Peller <eliad@wizery.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-20 15:04:36 -04:00
Eliad Peller 5966f2ddcd cfg80211: enter psm when working as p2p_cli
cfg80211_netdev_notifier_call() is configuring psm in case
of NL80211_IFTYPE_STATION interface type (on NETDEV_UP).
do the same for NL80211_IFTYPE_P2P_CLIENT interface type.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-20 15:04:35 -04:00
Johannes Berg b2abb6e2bc mac80211: sync driver before TX
In P2P client mode, the GO (AP) to connect to might
have periods of time where it is not available due
to powersave. To allow the driver to sync with it
and send frames to the GO only when it is available
add a new callback tx_sync (and the corresponding
finish_tx_sync). These callbacks can sleep unlike
the actual TX.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-20 15:04:35 -04:00
Pavel Roskin e0d687bd9d ath5k: merge ath5k_hw and ath5k_softc
Both ath5k_hw and ath5k_softc represent one instance of the hardware.
This duplication is historical and is not needed anymore.

Keep the name "ath5k_hw" for the merged structure and "ah" for the
variable pointing to it.  "ath5k_hw" is shorter than "ath5k_softc", more
descriptive and more widely used.

Put the combined structure to ath5k.h where the old ath5k_softc used to
be. Move some code from base.h to ath5k.h as needed.

Remove memory allocation for struct ath5k_hw and the corresponding error
handling.  Merge iobase and ah_iobase fields.

Signed-off-by: Pavel Roskin <proski@gnu.org>
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-20 15:04:33 -04:00
Rafał Miłecki 491735929b b43: bcma: implement full core reset
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19 17:03:12 -04:00
Rafał Miłecki 6f53912fc3 bcma: allow enabling PLL
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19 17:03:11 -04:00
Rafał Miłecki 7424dd0d03 bcma: allow setting FAST clockmode for a core
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19 17:03:11 -04:00
Rafał Miłecki 3de1a7748f bcma: trivial: add helpers for masking/setting
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19 17:03:09 -04:00
Rafał Miłecki bb932ad980 bcma: move define of BCMA_CLKCTLST register
Recent experiments have shown many cores share 0x1E0 register used for
clock management.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19 17:03:08 -04:00
Rafał Miłecki 2729df2555 b43: correctly display longer chipsets ids
Some of the newer Broadcom chipsets have longe names like BCM43224,
BCM43225, etc. However Broadcom decided to keep using u16 for storing
them. Use %X or %d depending on chip_id value to avoid BCMA8D8, etc.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19 16:50:01 -04:00
Johannes Berg 85a237fe30 mac80211: implement scan supported rates
Scanning currently uses the TX rate mask to
restrict the rate set, which is bogus. Make
it use the new set of rates from userspace.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19 16:50:00 -04:00
Johannes Berg 34850ab25d cfg80211: allow userspace to control supported rates in scan
Some P2P scans are not allowed to advertise
11b rates, but that is a rather special case
so instead of having that, allow userspace
to request the rate sets (per band) that are
advertised in scan probe request frames.

Since it's needed in two places now, factor
out some common code parsing a rate array.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19 16:49:58 -04:00
Rafał Miłecki 0b5dd734d3 b43: HT-PHY: fix masks in radio ctl
Old masks were causing ugly, delayed lock ups.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19 16:49:57 -04:00
Rafał Miłecki 40c6226967 b43: bcma: read info about supported bands
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19 16:49:56 -04:00
Rafał Miłecki 124cc11175 b43: bcma: define 80211 core specific IO status bits
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19 16:49:55 -04:00
Rafał Miłecki 2b5e3322b8 bcma: define IO status register
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19 16:49:54 -04:00
Kalle Valo 856799d582 ieee80211: add few wmm tspec values
These are needed by ath6kl for parsing tspec status from an IE.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19 16:49:54 -04:00
Rafał Miłecki eb1577b7c4 bcma: handle alternative SPROM location
Some cards do not use additional 0x30 offset for SPROM location. We do
not know the real condition for it yet, make it BCM4331 specific for
now.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19 16:49:53 -04:00
Rafał Miłecki b473bc1767 b43: HT-PHY: fix typo in 0x2059 radio init
Following operation was incorrectly translated:
 radio_read(0x0011) -> 0xffff
radio_write(0x0011) <- 0xfff7

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19 16:49:52 -04:00
Rafał Miłecki 49ac26fa5b b43: HT-PHY: find channel entry with regs data
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19 16:49:51 -04:00
Rafał Miłecki 315a685f26 b43: HT-PHY: switch to channel after enabling radio
Also change the default channel to 11. This is the first channel closed
driver switches to.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19 16:49:50 -04:00
Rafał Miłecki 3667787410 b43: use agent R/W ops for BCMA_IOCTL
BCMA_IOCTL is register in agent (AKA wrapper) core, we need to use
special R/W ops for it.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-19 15:43:40 -04:00
Rajkumar Manoharan 02c5172c31 ath9k: Fix some smatch warnings
drivers/net/wireless/ath/ath9k/hif_usb.c +135 hif_usb_mgmt_cb(6) warn:
variable dereferenced before check 'cmd'
drivers/net/wireless/ath/ath9k/btcoex.c +77 ath9k_hw_init_btcoex_hw(38)
error: buffer overflow 'ah->hw_gen_timers.gen_timer_index' 32 <=
2009813776

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-18 14:29:46 -04:00
Luciano Coelho f9ab38ba95 MAINTAINERS: change maintainer of the wl1251 driver
Kalle Valo has asked me to take over the maintenance of the wl1251
driver.  Thanks Kalle for all his work on the wl1251 driver, I'll try
to keep up with his good work from now on.

At the same time, update the Web URL to something more specific.
There's not much in that page, but we will try to update it soon.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Acked-by: Kalle Valo <kvalo@adurom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-18 14:29:45 -04:00
Rajkumar Manoharan 5479de6e87 ath9k: Fix sparse warnings
drivers/net/wireless/ath/ath9k/init.c:199:21: warning: context imbalance
in 'ath9k_reg_rmw' - different lock contexts for basic block
drivers/net/wireless/ath/ath9k/xmit.c:1175:31: warning: context
imbalance in 'ath_drain_txq_list' - unexpected unlock
drivers/net/wireless/ath/ath9k/xmit.c:2047:23: warning: context
imbalance in 'ath_tx_process_buffer' - unexpected unlock
drivers/net/wireless/ath/ath9k/ar9003_eeprom.c:3041:24: warning: cast to
restricted __le32

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-18 14:29:45 -04:00
Rafał Miłecki 0901edb758 b43: bus: drop inline from SSB functions
We use all that functions by pointers only. This forces compiler to
create additional duplicated functions that are not inline.
Noticed by Michael in similar bcma code.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-18 14:29:44 -04:00
Christian Lamparter 5829656728 carl9170: set beacon xmit power to the max
Harshal Chhaya discovered during network tests, that
several of his clients dropped-off the network. The
captured packets shows that the beacons sent by the
AP are at a much lower power than the other data
packets.

The reason for this mishap: The driver never updated
the beacon phy register, so all beacons were always
sent at the lowest power.

Reference: http://marc.info/?l=linux-wireless&m=131067225105801
Reported-by: Harshal Chhaya <harshal@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-18 14:29:44 -04:00
Christian Lamparter 943c33996f carl9170: move beacon_update into tx.c
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-18 14:29:43 -04:00
Christian Lamparter 43b52a5ae9 carl9170 firmware: update firmware headers
* reserves feature bit for CCA counters

 * extends hardware register file definitions

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-18 14:29:43 -04:00
Pavel Roskin 21ec489d00 ath9k: use ath_opmode_to_string()
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-18 14:29:43 -04:00
Pavel Roskin 6c2c1ed864 ath9k: remove defines in reg.h that exist in ../reg.h
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-18 14:29:42 -04:00
Pavel Roskin 78fa99abd7 ath9k: use get_unaligned_{b16, le16, le32} where possible
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-18 14:29:42 -04:00