Encapsulate the creation of a snapshot context for rbd in a new
function rbd_snap_context_create(). Define rbd wrappers for getting
and dropping references to them once they're created.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Change some calls to WARN_ON() so they use rbd_warn() instead, so we
get consistent messaging. A few remain but they can probably just
go away eventually.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
This commit added fetching if fancy striping parameters:
09186ddb rbd: get and check striping parameters
They are almost unused, but the two fields storing the information
really belonged in the rbd_image_header structure.
This patch moves them there.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Make the names and image id in an rbd_spec be pointers to constant
data. This required the use of a local variable to hold the
snapshot name in rbd_add_parse_args() to avoid a warning.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Set the rbd spec's snapshot id for an image getting mapped in
rbd_dev_probe_update_spec() rather than rbd_dev_set_mapping().
This is the more logical place for that to happen (even though
it means we might look up the snapshot by name twice).
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
A function called snap_by_name() ought to just look up a snapshot by
name. It does that, but then it assigns some stuff to the rbd
device structure as well.
Change the function to do just the lookup, and have the caller do
the assignments that follow.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
If a format 2 image id is found for an image being mapped, but the
subsequent probe of the image fails, rbd_dev_probe() quits without
freeing the image id. Fix that.
Also drop a redundant hunk of code in rbd_dev_image_id().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Currently, rbd_dev_probe() assumes that any error returned by
rbd_dev_image_id() is most likely -ENOENT, and responds by
calling the format 1 probe routine, rbd_dev_v1_probe(). Then,
at the top of rbd_dev_v1_probe(), an empty string is allocated
for the image id.
This is sort of unbalanced. Fix this by having rbd_dev_image_id()
look for -ENOENT from its "get_id" method call. If that is seen,
have it allocate the empty string there rather than depending on
rbd_dev_v1_probe() to do it.
Given that this is effectively defining the format of the image,
set rbd_dev->image_format inside rbd_dev_image_id() rather than in
the format-specific probe routines.
Also drop a redundant hunk of code in rbd_dev_image_id().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
I found during some failure injection testing that the call to
rbd_free_disk() in the error path of rbd_dev_probe_finish() was
dropping an extra reference to the disk queue. The problem
occurred when put_disk tried to drop a reference to the disk's
queue. A call to blk_cleanup_queue() just prior to that will have
also dropped a reference to the queue.
The problem is that the reference dropped by put_disk() is assumed
to have been taken by add_disk(). Our code has error paths that can
occur after the disk and its queue are initialized, but before the
call to add_disk(), and in those paths we won't have that extra
reference.
The fix is easy though. In rbd_free_disk() we're already checking
the disk's GENHD_FL_UP flag. That flag is an indication that
add_disk() has been called, so just call blk_cleanup_queue()
conditional on that flag being set.
This resolves:
http://tracker.ceph.com/issues/4800
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Now that rbd_obj_method_sync() returns the number of bytes
returned by the method call, that value should be used by
callers to ensure we don't overrun the valid portion of the
buffer.
Fix the two spots that remained that weren't doing that,
rbd_dev_image_name() and rbd_dev_v2_snap_name().
Rearrange the error path slightly in rbd_dev_v2_snap_name().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
When the snapshot context for an rbd device gets updated (or the
initial one is recorded) a a list of snapshot structures is created
to represent them, one entry per snapshot. Each entry includes a
dynamically-allocated copy of the snapshot name.
Currently the name is allocated in rbd_snap_create(), as a duplicate
of the passed-in name.
For format 1 images, the snapshot name provided is just a pointer to
an existing name. But for format 2 images, the passed-in name is
already dynamically allocated, and in the the process of duplicating
it here we are leaking the passed-in name.
Fix this by dynamically allocating the name for format 1 snapshots
also, and then stop allocating a duplicate in rbd_snap_create().
Change rbd_dev_v1_snap_info() so none of its parameters is
side-effected unless it's going to return success.
This is part of:
http://tracker.ceph.com/issues/4803
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Rename __rbd_add_snap_dev() to be rbd_snap_create(). We no longer
have devices for non-mapped snapshots, and we're not actually
"adding" it to the list in this function, just creating it.
Rename rbd_remove_snap_dev() to be rbd_snap_destroy() for reasons
similar to the above. Stop having this function delete the snapshot
from its list (to be symmetrical with its create counterpart) and do
that in the caller instead.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Change rbd_dev_v2_snap_info() so it only ever sets values of the
size and features parameters if looking up the snapshot name was
successful.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Only one of the two callers of _rbd_dev_v2_snap_size() needs the
order value returned. So make that an optional argument--a null
pointer if the caller doesn't need it.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
When an rbd image is initially mapped, its snapshot context is
collected, and then a list of snapshot entries representing the
snapshots in that context is created. The list is created using
rbd_dev_snaps_update(). (This function also supports updating an
existing snapshot list based on a new snapshot context.)
If an error occurs, updating the list is aborted, and the list is
currently left as-is, in an inconsistent state. At that point,
there may be a partially-constructed list, but the calling functions
(rbd_dev_probe_finish() from rbd_dev_probe() from rbd_add()) never
clean them up. So this constitutes a leak.
A snapshot list that is inconsistent with the current snapshot
context is of no use, and might even be actively bad. So rather
than just having the caller clean it up, have rbd_dev_snaps_update()
just clear out the entire snapshot list in the event an error
occurs.
The other place rbd_dev_snaps_update() is used is when a refresh is
triggered, either because of a watch callback or via a write to the
/sys/bus/rbd/devices/<id>/refresh interface. An error while
updating the snapshots has no substantive effect in either of those
cases, but one of them issues a warning. Move that warning to the
common rbd_dev_refresh() function so it gets issued regardless of
how it got initiated.
This is part of:
http://tracker.ceph.com/issues/4803
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
When an rbd image gets mapped a device entry gets created for it
under /sys/bus/rbd/devices/<id>/. Inside that directory there are
sysfs files that contain information about the image: its size,
feature bits, major device number, and so on.
Additionally, if that image has any snapshots, a device entry gets
created for each of those as a "child" of the mapped device. Each
of these is a subdirectory of the mapped device, and each directory
contains a few files with information about the snapshot (its
snapshot id, size, and feature mask).
There is no clear benefit to having those device entries for the
snapshots. The information provided via sysfs of of little real
value--and all of it is available via rbd CLI commands. If we
still wanted to see the kernel's view of this information it could
be done much more simply by including it in a single sysfs file for
the mapped image.
But there *is* a clear cost to supporting them. Every time a snapshot
context changes, these entries need to be updated (deleted snapshots
removed, new snapshots created). The rbd driver is notified of
changes to the snapshot context via callbacks from an osd, and care
must be taken to coordinate removal of snapshot data structures
with the possibility of one these notifications occurring.
Things would be considerably simpler if we just didn't have to
maintain device entries for the snapshots.
So get rid of them.
The ability to map a snapshot of an rbd image will remain; the only
thing lost will be the ability to query these sysfs directories for
information about snapshots of mapped images.
This resolves:
http://tracker.ceph.com/issues/4796
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Now that we have most everything in place to support layered rbd
images, enable support for them in the kernel client. Issue a
warning to the log that the support is considered experimental
whenever a format 2 layered image is mapped.
Note that we also have to claim to support the STRIPINGV2 feature,
due to a mistake in the way the rbd CLI set up those flags. This
feature can work if it has the right parameters, and safeguards
have been put in place to reject those images that do not have
compatible parameters.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
If an rbd format 2 image indicates it supports the STRIPINGV2
feature we need to find out its stripe unit and stripe count in
order to know whether we can use it. We don't yet support fancy
striping fully, but if the default parameters are used the behavior
is indistinguishible from non-fancy striping.
This is necessary because some images require the STRIPINGV2 feature
even if they use the default parameters. (Which is to say the feature
bit was erroneously set even if the feature was not used.)
This resolves:
http://tracker.ceph.com/issues/4709
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Callers of rbd_obj_method_sync() don't know how many bytes of data
got returned by the class method call. As a result, they have been
assuming enough got returned to decode whatever was expected.
This isn't safe. We know how many bytes got transferred, so have
rbd_obj_method_sync() return that amount (rather than just 0) if
the call is successful.
Change all callers to use this return value to ensure decoding of
the results is done safely.
On the other hand, most callers of rbd_obj_method_sync() only
indicate success or failure, so all of *their* callers can simply
test for non-zero result.
This resolves:
http://tracker.ceph.com/issues/4773
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Make the inbound and outbound data parameters have void rather than
character type for rbd_obj_method_sync(). This makes it more clear
they don't expect typed data, and eliminates the need for some silly
type casts.
One more unrelated change: define the features buffer used in
_rbd_dev_v2_snap_features() to be a packed data structure.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Make the buf parameter into which the data is to be read have type
void pointer.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
A clone image has a defined overlap point with its parent image.
That is the byte offset beyond which the parent image has no
defined data to back the clone, and anything thereafter can be
viewed as being zero-filled by the clone image.
This is needed because a clone image can be resized. If it gets
resized larger than the snapshot it is based on, the overlap defines
the original size. If the clone gets resized downward below the
original size the new clone size defines the overlap. If the clone
is subsequently resized to be larger, the overlap won't be increased
because the previous resize invalidated any parent data beyond that
point.
This resolves:
http://tracker.ceph.com/issues/4724
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
This implements the main copyup functionality for layered writes.
Here we add a copyup_pages field to the object request, which is
used only for copyup requests to keep track of the page array
containing data read from the parent image.
A copyup request is currently the only request rbd has that requires
two osd operations. Because of this we handle copyup specially.
All image object requests get an osd request allocated when they are
created. For a write request, if a copyup is required, the osd
request originally allocated is released, and a new one (with room
for two osd ops) is allocated to replace it. A new function
rbd_osd_req_create_copyup() allocates an osd request suitable for
a copyup request.
The first op is then filled with a copyup object class method call,
supplying the array of pages containing data read from the parent.
The second op is filled in with the original write request.
The original request otherwise remains intact, and it describes the
original write request (found in the second osd op). The presence
of the copyup op is sort of implicit; a non-null copyup_pages field
could be used to distinguish between a "normal" write request and a
request containing both a copyup call and a write.
This resolves:
http://tracker.ceph.com/issues/3419
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
As a step toward implementing layered writes, implement reading the
data for a target object from the parent image for a write request
whose target object is known to not exist. Add a copyup_pages field
to an image request to track the page array used (only) for such a
request.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
If rbd disk is open and rbd resize is done, new size is not
visible by filesystem. Like is done in virtio-blk and dm driver,
revalidate_disk() permits to update the bd_inode size.
Signed-off-by: Laurent Barbe <laurent@ksperis.com>
Reviewed-by: Alex Elder <elder@inktank.com>
This patch adds the ability to build an image request whose data
will be written from or read into memory described by a page array.
(Previously only bio lists were supported.)
Originally this was going to define a new function for this purpose
but it was largely identical to the rbd_img_request_fill_bio(). So
instead, rbd_img_request_fill_bio() has been generalized to handle
both types of image request.
For the moment we still only fill image requests with bio data.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Define a new function zero_pages() that zeroes a range of memory
defined by a page array, along the lines of zero_bio_chain(). It
saves and the irq flags like bvec_kmap_irq() does, though I'm not
sure at this point that it's necessary.
Update rbd_img_obj_request_read_callback() to use the new function
if the object request contains page rather than bio data.
For the moment, only bio data is used for osd READ ops.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Object requests that are part of an image request are subject to
some additional handling. Define rbd_img_obj_request_submit() to
encapsulate that, and use it when initially submitting an image
object request, and when re-submitting it during callback of
an object existence check.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Separate rbd_osd_req_format() into two functions, one for read
requests and the other for write requests.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
This is a step toward fully implementing layered writes.
Add checks before request submission for the object(s) associated
with an image request. For write requests, if we don't know that
the target object exists, issue a STAT request to find out. When
that request completes, mark the known and exists flags for the
original object request accordingly and re-submit the object
request. (Note that this still does the existence check only; the
copyup operation is not yet done.)
A new object request is created to perform the existence check. A
pointer to the original request is added to that object request to
allow the stat request to re-issue the original request after
updating its flags. If there is a failure with the stat request
the error code is stored with the original request, which is then
completed.
This resolves:
http://tracker.ceph.com/issues/3418
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
This creates two new flags for object requests to indicate what is
known about the existence of the object to which a request is to be
sent. The KNOWN flag will be true if the the EXISTS flag is
meaningful. That is:
KNOWN EXISTS
----- ------
0 0 don't know whether the object exists
0 1 (not used/invalid)
1 0 object is known to not exist
1 0 object is known to exist
This will be used in determining how to handle write requests for
data objects for layered rbd images.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
In a few spots, whether the an object request's img_request pointer
is null is used to determine whether an object request is being done
as part of an image data request.
Stop doing that, and instead always use the object request IMG_DATA
flag for that purpose. Swap the order of the definition of the
IMG_DATA and DONE flag helpers, because obj_request_done_set() now
refers to obj_request_img_data_set() to get its rbd_dev value.
This will become important because the img_request pointer is
about to become part of a union.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
An extra reference is taken when an object request is added as one
of the requests making up an image object. A reference is dropped
again when the image's object requests get submitted.
The original reference for the object request will remain throughout
this period, so we don't need to add and then take away an extra
one.
This can be interpreted as the image request inheriting the original
object request's reference.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
In the incremental move toward supporting distinct data items in an
osd request some of the functions had "write_request" parameters to
indicate, basically, whether the data belonged to in_data or the
out_data. Now that we maintain the data fields in the op structure
there is no need to indicate the direction, so get rid of the
"write_request" parameters.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Implement layered read requests for format 2 rbd images.
If an rbd image is a clone of a snapshot, the snapshot will be the
clone's "parent" image. When an object read request on a clone
comes back with ENOENT it indicates that the clone is not yet
populated with that portion of the image's data, and the parent
image should be consulted to satisfy the read.
When this occurs, a new image request is created, directed to the
parent image. The offset and length of the image are the same as
the image-relative offset and length of the object request that
produced ENOENT. Data from the parent image therefore satisfies the
object read request for the original image request.
While this code works, it will not be active until we enable the
layering feature (by adding RBD_FEATURE_LAYERING to the value of
RBD_FEATURES_SUPPORTED).
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Call the probe function for the parent device if one is present.
Since we don't formally support the layering feature we won't
be using this functionality just yet.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Add a flag to distinguish between object requests being done on
standalone objects and requests being sent for objects representing
rbd image data (i.e., object requests that are the result of image
request).
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
We're going to need some more Boolean values for object requests,
so create a flags bit field and use it to record whether the request
is done.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Encapsulate the code that completes processing of an object request
that's part of an image request.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Define a flag indicating whether an image request is for a layered
image (one with a parent image to which requests will be redirected
if the target object of a request does not exist). The code that
checks this flag will be added shortly.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Define a flag indicating whether an image request originated from
the Linux block layer (from blk_fetch_request()) or whether it was
initiated in order to satisfy an object request for a child image
of a layered rbd device. For image requests initiated by objects of
child images we'll save a pointer to the object request rather than
the Linux block request.
For now, only block requests are used.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
There are several Boolean values we'll be maintaining for image
requests. Switch from the single write_request field to a
general-purpose flags field, and use one if its bits to represent
the direction of I/O for the image request. Define helper functions
for setting and testing that flag.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
For an image object request we will need to know what offset within
the rbd image the request covers. Record that when the object
request gets created.
Update the I/O error warnings so they use this so what's reported
is more informative.
Rename a local variable to fit the convention used everywhere else.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Compute the total number of bytes transferred for an image
request--the sum across each of the request's object requests.
To avoid contention do it only when all object requests are
complete, in rbd_img_request_complete().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
If any image object request produces a non-zero result, preserve
that as the result of the overall image request. If multiple
objects have non-zero results, save only the first one.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
There is a new rbd feature bit defined for "fancy striping." Add
it to the ones defined in the kernel client.
Change RBD_FEATURES_ALL so it represents the set of all feature
bits (rather than just the ones we support). Define a new symbol
RBD_FEATURES_SUPPORTED to indicate the supported ones.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Right now the data for a method call is specified via a pointer and
length, and it's copied--along with the class and method name--into
a pagelist data item to be sent to the osd. Instead, encode the
data in a data item separate from the class and method names.
This will allow large amounts of data to be supplied to methods
without copying. Only rbd uses the class functionality right now,
and when it really needs this it will probably need to use a page
array rather than a page list. But this simple implementation
demonstrates the functionality on the osd client, and that's enough
for now.
This resolves:
http://tracker.ceph.com/issues/4104
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
This ends up being a rather large patch but what it's doing is
somewhat straightforward.
Basically, this is replacing two calls with one. The first of the
two calls is initializing a struct ceph_osd_data with data (either a
page array, a page list, or a bio list); the second is setting an
osd request op so it associates that data with one of the op's
parameters. In place of those two will be a single function that
initializes the op directly.
That means we sort of fan out a set of the needed functions:
- extent ops with pages data
- extent ops with pagelist data
- extent ops with bio list data
and
- class ops with page data for receiving a response
We also have define another one, but it's only used internally:
- class ops with pagelist data for request parameters
Note that we *still* haven't gotten rid of the osd request's
r_data_in and r_data_out fields. All the osd ops refer to them for
their data. For now, these data fields are pointers assigned to the
appropriate r_data_* field when these new functions are called.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
This patch just trivially moves around some code for consistency.
In preparation for initializing osd request data fields in
ceph_osdc_build_request(), I wanted to verify that rbd did in fact
call that immediately before it called ceph_osdc_start_request().
It was true (although image requests are built in a group and then
started as a group). But I made the changes here just to make
it more obvious, by making all of the calls follow a common
sequence:
osd_req_op_<optype>_init();
ceph_osd_data_<type>_init()
osd_req_op_<optype>_<datafield>()
rbd_osd_req_format()
...
ret = rbd_obj_request_submit()
I moved the initialization of the callback for image object requests
into rbd_img_request_fill_bio(), again, for consistency. To avoid
a forward reference, I moved the definition of rbd_img_obj_callback()
up in the file.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The osd data for a request is currently initialized inside
rbd_osd_req_create(), but that assumes an object request's data
belongs in the osd request's data in or data out field.
There are only three places where requests with data are set up, and
it turns out it's easier to call just the osd data init routines
directly there rather than handling it in rbd_osd_req_create().
(The real motivation here is moving toward getting rid of the
osd request in and out data fields.)
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Currently an object request has its osd request's data field set in
rbd_osd_req_format_op(). That assumes a single osd op per object
request, and that won't be the case for long.
Move the code that sets this out and into the caller.
Rename rbd_osd_req_format_op() to be just rbd_osd_req_format(),
removing the notion that it's doing anything op-specific.
This and the next patch resolve:
http://tracker.ceph.com/issues/4658
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
An osd request now holds all of its source op structures, and every
place that initializes one of these is in fact initializing one
of the entries in the the osd request's array.
So rather than supplying the address of the op to initialize, have
caller specify the osd request and an indication of which op it
would like to initialize. This better hides the details the
op structure (and faciltates moving the data pointers they use).
Since osd_req_op_init() is a common routine, and it's not used
outside the osd client code, give it static scope. Also make
it return the address of the specified op (so all the other
init routines don't have to repeat that code).
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
An extent type osd operation currently implies that there will
be corresponding data supplied in the data portion of the request
(for write) or response (for read) message. Similarly, an osd class
method operation implies a data item will be supplied to receive
the response data from the operation.
Add a ceph_osd_data pointer to each of those structures, and assign
it to point to eithre the incoming or the outgoing data structure in
the osd message. The data is not always available when an op is
initially set up, so add two new functions to allow setting them
after the op has been initialized.
Begin to make use of the data item pointer available in the osd
operation rather than the request data in or out structure in
places where it's convenient. Add some assertions to verify
pointers are always set the way they're expected to be.
This is a sort of stepping stone toward really moving the data
into the osd request ops, to allow for some validation before
making that jump.
This is the first in a series of patches that resolve:
http://tracker.ceph.com/issues/4657
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
An osd request keeps a pointer to the osd operations (ops) array
that it builds in its request message.
In order to allow each op in the array to have its own distinct
data, we will need to keep track of each op's data, and that
information does not go over the wire.
As long as we're tracking the data we might as well just track the
entire (source) op definition for each of the ops. And if we're
doing that, we'll have no more need to keep a pointer to the
wire-encoded version.
This patch makes the array of source ops be kept with the osd
request structure, and uses that instead of the version encoded in
the message in places where that was previously used. The array
will be embedded in the request structure, and the maximum number of
ops we ever actually use is currently 2. So reduce CEPH_OSD_MAX_OP
to 2 to reduce the size of the structure.
The result of doing this sort of ripples back up, and as a result
various function parameters and local variables become unnecessary.
Make r_num_ops be unsigned, and move the definition of struct
ceph_osd_req_op earlier to ensure it's defined where needed.
It does not yet add per-op data, that's coming soon.
This resolves:
http://tracker.ceph.com/issues/4656
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Define rbd_osd_req_format_op(), which encapsulates formatting
an osd op into an object request's osd request message. Only
one op is supported right now.
Stop calling ceph_osdc_build_request() in rbd_osd_req_create().
Instead, call rbd_osd_req_format_op() in each of the callers of
rbd_osd_req_create().
This is to prepare for the next patch, in which the source ops for
an osd request will be held in the osd request itself. Because of
that, we won't have the source op to work with until after the
request is created, so we can't format the op until then.
This an the next patch resolve:
http://tracker.ceph.com/issues/4656
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Define and use functions that encapsulate the initializion of a
ceph_osd_data structure.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
When rbd creates an object request containing an object method call
operation it is passing 0 for the size. I originally thought this
was because the length was not needed for method calls, but I think
it really should be supplied, to describe how much space is
available to receive response data. So provide the supplied length.
This resolves:
http://tracker.ceph.com/issues/4659
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
When assigning a bio pointer to an osd request, we don't have an
efficient way of knowing the total length bytes in the bio list.
That information is available at the point it's set up by the rbd
code, so record it with the osd data when it's set.
This and the next patch are related to maintaining the length of a
message's data independent of the message header, as described here:
http://tracker.ceph.com/issues/4589
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The rbd code has a function that allocates and populates a
ceph_osd_req_op structure (the in-core version of an osd request
operation). When reviewed, Josh suggested two things: that the
big varargs function might be better split into type-specific
functions; and that this functionality really belongs in the osd
client rather than rbd.
This patch implements both of Josh's suggestions. It breaks
up the rbd function into separate functions and defines them
in the osd client module as exported interfaces. Unlike the
rbd version, however, the functions don't allocate an osd_req_op
structure; they are provided the address of one and that is
initialized instead.
The rbd function has been eliminated and calls to it have been
replaced by calls to the new routines. The rbd code now now use a
stack (struct) variable to hold the op rather than allocating and
freeing it each time.
For now only the capabilities used by rbd are implemented.
Implementing all the other osd op types, and making the rest of the
code use it will be done separately, in the next few patches.
Note that only the extent, cls, and watch portions of the
ceph_osd_req_op structure are currently used. Delete the others
(xattr, pgls, and snap) from its definition so nobody thinks it's
actually implemented or needed. We can add it back again later
if needed, when we know it's been tested.
This (and a few follow-on patches) resolves:
http://tracker.ceph.com/issues/3861
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Move some definitions for max integer values out of the rbd code and
into the more central "decode.h" header file. These really belong
in a Linux (or libc) header somewhere, but I haven't gotten around
to proposing that yet.
This is in preparation for moving some code out of rbd.c and into
the osd client.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The length of outgoing data in an osd request is dependent on the
osd ops that are embedded in that request. Each op is encoded into
a request message using osd_req_encode_op(), so that should be used
to determine the amount of outgoing data implied by the op as it
is encoded.
Have osd_req_encode_op() return the number of bytes of outgoing data
implied by the op being encoded, and accumulate and use that in
ceph_osdc_build_request().
As a result, ceph_osdc_build_request() no longer requires its "len"
parameter, so get rid of it.
Using the sum of the op lengths rather than the length provided is
a valid change because:
- The only callers of osd ceph_osdc_build_request() are
rbd and the osd client (in ceph_osdc_new_request() on
behalf of the file system).
- When rbd calls it, the length provided is only non-zero for
write requests, and in that case the single op has the
same length value as what was passed here.
- When called from ceph_osdc_new_request(), (it's not all that
easy to see, but) the length passed is also always the same
as the extent length encoded in its (single) write op if
present.
This resolves:
http://tracker.ceph.com/issues/4406
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Record the byte count for an osd request rather than the page count.
The number of pages can always be derived from the byte count (and
alignment/offset) but the reverse is not true.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
An osd request defines information about where data to be read
should be placed as well as where data to write comes from.
Currently these are represented by common fields.
Keep information about data for writing separate from data to be
read by splitting these into data_in and data_out fields.
This is the key patch in this whole series, in that it actually
identifies which osd requests generate outgoing data and which
generate incoming data. It's less obvious (currently) that an osd
CALL op generates both outgoing and incoming data; that's the focus
of some upcoming work.
This resolves:
http://tracker.ceph.com/issues/4127
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
An osd request uses either pages or a bio list for its data. Use a
union to record information about the two, and add a data type
tag to select between them.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Pull the fields in an osd request structure that define the data for
the request out into a separate structure.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
It's possible that the reference to the object request dropped
inside the loop in rbd_img_request_submit() will be the last
one, in which case the content of the object pointer can't be
trusted.
Use a safe form of the object request list traversal to avoid
problems.
This resolves:
http://tracker.ceph.com/issues/4705
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Tejun writes:
-----
This is the pull request for the earlier patchset[1] with the same
name. It's only three patches (the first one was committed to
workqueue tree) but the merge strategy is a bit involved due to the
dependencies.
* Because the conversion needs features from wq/for-3.10,
block/for-3.10/core is based on rc3, and wq/for-3.10 has conflicts
with rc3, I pulled mainline (rc5) into wq/for-3.10 to prevent those
workqueue conflicts from flaring up in block tree.
* Resolving the issue that Jan and Dave raised about debugging
requires arch-wide changes. The patchset is being worked on[2] but
it'll have to go through -mm after these changes show up in -next,
and not included in this pull request.
The three commits are located in the following git branch.
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq.git writeback-workqueue
Pulling it into block/for-3.10/core produces a conflict in
drivers/md/raid5.c between the following two commits.
e3620a3ad5 ("MD RAID5: Avoid accessing gendisk or queue structs when not available")
2f6db2a707 ("raid5: use bio_reset()")
The conflict is trivial - one removes an "if ()" conditional while the
other removes "rbi->bi_next = NULL" right above it. We just need to
remove both. The merged branch is available at
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq.git block-test-merge
so that you can use it for verification. The test merge commit has
proper merge description.
While these changes are a bit of pain to route, they make code simpler
and even have, while minute, measureable performance gain[3] even on a
workload which isn't particularly favorable to showing the benefits of
this conversion.
----
Fixed up the conflict.
Conflicts:
drivers/md/raid5.c
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A result of ENOENT from a read request for an object that's part of
an rbd image indicates that there is a hole in that portion of the
image. Similarly, a short read for such an object indicates that
the remainder of the read should be interpreted a full read with
zeros filling out the end of the request.
This behavior is not correct for objects that are not backing rbd
image data. Currently rbd_img_obj_request_callback() assumes it
should be done for all objects.
Change rbd_img_obj_request_callback() so it only does this zeroing
for image objects. Encapsulate that special handling in its own
function. Add an assertion that the image object request is a bio
request, since we assume that (and we currently don't support any
other types).
This resolves a problem identified here:
http://tracker.ceph.com/issues/4559
The regression was introduced by bf0d5f503d.
Reported-by: Dan van der Ster <dan@vanderster.com>
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-off-by: Sage Weil <sage@inktank.com>
__bio_for_each_segment() iterates bvecs from the specified index
instead of bio->bv_idx. Currently, the only usage is to walk all the
bvecs after the bio has been advanced by specifying 0 index.
For immutable bvecs, we need to split these apart;
bio_for_each_segment() is going to have a different implementation.
This will also help document the intent of code that's using it -
bio_for_each_segment_all() is only legal to use for code that owns the
bio.
Signed-off-by: Kent Overstreet <koverstreet@google.com>
CC: Jens Axboe <axboe@kernel.dk>
CC: Neil Brown <neilb@suse.de>
CC: Boaz Harrosh <bharrosh@panasas.com>
Use the new version of the encoding for osd requests and replies. In the
process, update the way we are tracking request ops and reply lengths and
results in the struct ceph_osd_request. Update the rbd and fs/ceph users
appropriately.
The main changes are:
- we keep pointers into the request memory for fields we need to update
each time the request is sent out over the wire
- we keep information about the result in an array in the request struct
where the users can easily get at it.
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
The only thing type-specific osd completion functions do with their
osd op parameter is (in some cases) extract the number of bytes
transferred from it. In the other cases, the xferred bytes field
is not used, and total message data transfer byte count (which may
well be zero) is used.
Just set the object request transfer count in the main osd request
callback function and provide that to the other routines. There is
then no longer any need to pass the op pointer to the type-specific
completion routines, so drop those parameters.
Stop doing anything with the total message data length.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
This function is slightly out of place, probably the result
of an errant automatic merge or something.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Fengguang Wu reminded me that there were outstanding sparse reports
in the ceph and rbd code. This patch fixes these problems in rbd
that lead to those reports:
- Convert functions that are never referenced externally to have
static scope.
- Add a lockdep annotation to rbd_request_fn(), because it
releases a lock before acquiring it again.
This partially resolves:
http://tracker.ceph.com/issues/4184
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Add dout() calls to facilitate tracing of image and object requests.
Change a few existing calls so they use __func__ rather than the
hard-coded function name. Have calls always add ":" after the name
of the function, and prefix pointer values with a consistent tag
indicating what it represents. (Note that there remain some older
dout() calls that are left untouched by this patch.)
Issue a warning if rbd_osd_write_callback() ever gets a short write.
This resolves:
http://tracker.ceph.com/issues/4235
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Let's go shopping!
I'm afraid this may not have gotten it right:
07741308 rbd: add barriers near done flag operations
The smp_wmb() should have been done *before* setting the done flag,
to ensure all other data was valid before marking the object request
done.
Switch to use atomic_inc_return() here to set the done flag, which
allows us to verify we don't mark something done more than once.
Doing this also implies general barriers before and after the call.
And although a read memory barrier might have been sufficient before
reading the done flag, convert this to a full memory barrier just
to put this issue to bed.
This resolves:
http://tracker.ceph.com/issues/4238
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The old request code simply ignored zero-length requests. We should
still operate that same way to avoid any changes in behavior. We
can implement handling for special zero-length requests separately
(see http://tracker.ceph.com/issues/4236).
Add some assertions based on this new constraint.
This resolves:
http://tracker.ceph.com/issues/4237
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The return values provided for ceph_copy_to_page_vector() and
ceph_copy_from_page_vector() serve no purpose, so get rid of them.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The result of ceph_copy_from_page_vector() is simply the length
argument it is provided.
This is called by rbd_obj_method_sync(), which returns the result if
it's non-negative. But we always either ignore or overwrite that
return value. So explicitly ignore what's returned by the copy
function, and have rbd_obj_method_sync() always return either a
negative errno or 0.
We also return the result of ceph_copy_from_page_vector() in
rbd_obj_read_sync(). There we still want to return the number of
bytes transferred, but we can use the value we already have in hand
rather than what ceph_copy_from_page_vector() provides.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
In rbd_obj_read_sync(), verify the number of bytes transferred won't
exceed what can be represented by a size_t before using it to
indicate the number of bytes to copy to the result buffer.
(The real motivation for this is to prepare for the next patch.)
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Add support for CEPH_OSD_OP_STAT operations in the osd client
and in rbd.
This operation sends no data to the osd; everything required is
encoded in identity of the target object.
The result will be ENOENT if the object doesn't exist. If it does
exist and no other error occurs the server returns the size and last
modification time of the target object as output data (in little
endian format). The size is a 64 bit unsigned and the time is
ceph_timespec structure (two unsigned 32-bit integers, representing
a seconds and nanoseconds value).
This resolves:
http://tracker.ceph.com/issues/4007
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The for_each_obj_request*() macros should parenthesize their uses of
the ireq parameter.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
There is only one caller of ceph_osdc_create_event(), and it
provides 0 as its "one_shot" argument. Get rid of that argument and
just use 0 in its place.
Replace the code in handle_watch_notify() that executes if one_shot
is nonzero in the event with a BUG_ON() call.
While modifying "osd_client.c", give handle_watch_notify() static
scope.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Somehow, I missed this little item in Documentation/atomic_ops.txt:
*** WARNING: atomic_read() and atomic_set() DO NOT IMPLY BARRIERS! ***
Create and use some helper functions that include the proper memory
barriers for manipulating the done field.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
This commit:
bc7a62ee5 rbd: prevent open for image being removed
added checking for removing rbd before allowing an open, and used
the same request spinlock for protecting that and updating the open
count as is used for the request queue.
However it used the non-irq protected version of the spinlocks.
Fix that.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
There is a check in the completion path for osd requests that
ensures the number of pages allocated is enough to hold the amount
of incoming data expected.
For bio requests coming from rbd the "number of pages" is not really
meaningful (although total length would be). So stop requiring that
nr_pages be supplied for bio requests. This is done by checking
whether the pages pointer is null before checking the value of
nr_pages.
Note that this value is passed on to the messenger, but there it's
only used for debugging--it's never used for validation.
While here, change another spot that used r_pages in a debug message
inappropriately, and also invalidate the r_con_filling_msg pointer
after dropping a reference to it.
This resolves:
http://tracker.ceph.com/issues/3875
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Currently, if the OSD client finds an osd request has had a bio list
attached to it, it drops a reference to it (or rather, to the first
entry on that list) when the request is released.
The code that added that reference (i.e., the rbd client) is
therefore required to take an extra reference to that first bio
structure.
The osd client doesn't really do anything with the bio pointer other
than transfer it from the osd request structure to outgoing (for
writes) and ingoing (for reads) messages. So it really isn't the
right place to be taking or dropping references.
Furthermore, the rbd client already holds references to all bio
structures it passes to the osd client, and holds them until the
request is completed. So there's no need for this extra reference
whatsoever.
So remove the bio_put() call in ceph_osdc_release_request(), as
well as its matching bio_get() call in rbd_osd_req_create().
This change could lead to a crash if old libceph.ko was used with
new rbd.ko. Add a compatibility check at rbd initialization time to
avoid this possibilty.
This resolves:
http://tracker.ceph.com/issues/3798 and
http://tracker.ceph.com/issues/3799
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
An open request for a mapped rbd image can arrive while removal of
that mapping is underway. We need to prevent such an open request
from succeeding. (It appears that Maciej Galkiewicz ran into this
problem.)
Define and use a "removing" flag to indicate a mapping is getting
removed. Set it in the remove path after verifying nothing holds
the device open. And check it in the open path before allowing the
open to proceed. Acquire the rbd device's lock around each of these
spots to avoid any races accessing the flags and open_count fields.
This addresses:
http://tracker.newdream.net/issues/3427
Reported-by: Maciej Galkiewicz <maciejgalkiewicz@ragnarson.com>
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Define a new rbd device flags field, manipulated using bit
operations. Replace the use of the current "exists" flag with a bit
in this new "flags" field. Add a little commentary about the
"exists" flag, which does not need to be manipulated atomically.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
When we register an osd request to linger, it means that request
will stay around (under control of the osd client) until we've
unregistered it. We do that for an rbd image's header object, and
we keep a pointer to the object request associated with it.
Keep a reference to the watch object request for as long as it is
registered to linger. Drop it again after we've removed the linger
registration.
This resolves:
http://tracker.ceph.com/issues/3937
(Note: this originally came about because the osd client was
issuing a callback more than once. But that behavior will be
changing soon, documented in tracker issue 3967.)
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Decrement the obj_request_count value when deleting an object
request from its image request's list. Rearrange a few lines
in the surrounding code.
This resolves:
http://tracker.ceph.com/issues/3940
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Switch to keeping track of the object request pointer rather than
the osd request used to watch the rbd image header object.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Move the code that unregisters an rbd device's lingering header
object watch request into rbd_dev_header_watch_sync(), so it
occurs in the same function that originally sets up that request.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Get rid rbd_req_sync_exec() because it is no longer used. That
eliminates the last use of rbd_req_sync_op(), so get rid of that
too. And finally, that leaves rbd_do_request() unreferenced, so get
rid of that.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Reimplement synchronous object method calls using the new request
tracking code. Use the name rbd_obj_method_sync()
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
When we receive notification of a change to an rbd image's header
object we need to refresh our information about the image (its
size and snapshot context). Once we have refreshed our rbd image
we need to acknowledge the notification.
This acknowledgement was previously done synchronously, but there's
really no need to wait for it to complete.
Change it so the caller doesn't wait for the notify acknowledgement
request to complete. And change the name to reflect it's no longer
synchronous.
This resolves:
http://tracker.newdream.net/issues/3877
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Get rid rbd_req_sync_notify_ack() because it is no longer used.
As a result rbd_simple_req_cb() becomes unreferenced, so get rid
of that too.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Use the new object request tracking mechanism for handling a
notify_ack request.
Move the callback function below the definition of this so we don't
have to do a pre-declaration.
This resolves:
http://tracker.newdream.net/issues/3754
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Get rid of rbd_req_sync_watch(), because it is no longer used.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Implement a new function to set up or tear down a watch event
for an mapped rbd image header using the new request code.
Create a new object request type "nodata" to handle this. And
define rbd_osd_trivial_callback() which simply marks a request done.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Delete rbd_req_sync_read() is no longer used, so get rid of it.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Reimplement the synchronous read operation used for reading a
version 1 header using the new request tracking code. Name the
resulting function rbd_obj_read_sync() to better reflect that
it's a full object operation, not an object request. To do this,
implement a new OBJ_REQUEST_PAGES object request type.
This implements a new mechanism to allow the caller to wait for
completion for an rbd_obj_request by calling rbd_obj_request_wait().
This partially resolves:
http://tracker.newdream.net/issues/3755
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The two remaining callers of rbd_do_request() always pass a null
collection pointer, so the "coll" and "coll_index" parameters are
not needed. There is no other use of that data structure, so it
can be eliminated.
Deleting them means there is no need to allocate a rbd_request
structure for the callback function. And since that's the only use
of *that* structure, it too can be eliminated.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Now that the request function has been replaced by one using the new
request management data structures the old one can go away.
Deleting it makes rbd_dev_do_request() no longer needed, and
deleting that makes other functions unneeded, and so on.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
This patch fully implements the new request tracking code for rbd
I/O requests.
Each I/O request to an rbd image will get an rbd_image_request
structure allocated to track it. This provides access to all
information about the original request, as well as access to the
set of one or more object requests that are initiated as a result
of the image request.
An rbd_obj_request structure defines a request sent to a single osd
object (possibly) as part of an rbd image request. An rbd object
request refers to a ceph_osd_request structure built up to represent
the request; for now it will contain a single osd operation. It
also provides space to hold the result status and the version of the
object when the osd request completes.
An rbd_obj_request structure can also stand on its own. This will
be used for reading the version 1 header object, for issuing
acknowledgements to event notifications, and for making object
method calls.
All rbd object requests now complete asynchronously with respect
to the osd client--they supply a common callback routine.
This resolves:
http://tracker.newdream.net/issues/3741
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
When an rbd image is initially mapped a watch event is registered so
we can do something if the header object changes.
The code that does this currently loops if initiating the watch
request results in an ERANGE error. The osds will never return
ERANGE, so there's no reason to do this loop, so get rid of it.
This resolves:
http://tracker.newdream.net/issues/3860
Note that the problem this loop was intended to solve is a race
between collecting image header information and setting up the watch
on the header object. The real fix for that problem is described
here:
http://tracker.newdream.net/issues/3871
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The return type of rbd_get_num_segments() is int, but the values it
operates on are u64. Although it's not likely, there's no guarantee
the result won't exceed what can be respresented in an int. The
function is already designed to return -ERANGE on error, so just add
this possible overflow as another reason to return that.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Dan Mick <dan.mick@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
A few very minor changes to the rbd code:
- RBD_MAX_OPT_LEN is unused, so get rid of it
- Consolidate rbd options definitions
- Make rbd_segment_name() return pointer to const char
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Dan Mick <dan.mick@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The type of the snap_id local variable is defined with the
wrong byte order. Fix that.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Both rbd_req_sync_op() and rbd_do_request() have a "linger"
parameter, which is the address of a pointer that should refer to
the osd request structure used to issue a request to an osd.
Only one case ever supplies a non-null "linger" argument: an
CEPH_OSD_OP_WATCH start. And in that one case it is assigned
&rbd_dev->watch_request.
Within rbd_do_request() (where the assignment ultimately gets made)
we know the rbd_dev and therefore its watch_request field. We
also know whether the op being sent is CEPH_OSD_OP_WATCH start.
Stop opaquely passing down the "linger" pointer, and instead just
assign the value directly inside rbd_do_request() when it's needed.
This makes it unnecessary for rbd_req_sync_watch() to make
arrangements to hold a value that's not available until a
bit later. This more clearly separates setting up a watch
request from submitting it.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The two remaining osd ops used by rbd are CEPH_OSD_OP_WATCH and
CEPH_OSD_OP_NOTIFY_ACK. Move the setup of those operations into
rbd_osd_req_op_create(), and get rid of rbd_create_rw_op() and
rbd_destroy_op().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Move the initialization of the CEPH_OSD_OP_CALL operation into
rbd_osd_req_op_create().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Move the assignment of the extent offset and length and payload
length out of rbd_req_sync_op() and into its caller in the one spot
where a read (and note--no write) operation might be initiated.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
In rbd_do_request() there's a sort of last-minute assignment of the
extent offset and length and payload length for read and write
operations. Move those assignments into the caller (in those spots
that might initiate read or write operations)
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
When rbd_req_sync_notify_ack() calls rbd_do_request() it supplies
rbd_simple_req_cb() as its callback function. Because the callback
is supplied, an rbd_req structure gets allocated and populated so it
can be used by the callback. However rbd_simple_req_cb() is not
freeing (or even using) the rbd_req structure, so it's getting
leaked.
Since rbd_simple_req_cb() has no need for the rbd_req structure,
just avoid allocating one for this case. Of the three calls to
rbd_do_request(), only the one from rbd_do_op() needs the rbd_req
structure, and that call can be distinguished from the other two
because it supplies a non-null rbd_collection pointer.
So fix this leak by only allocating the rbd_req structure if a
non-null "coll" value is provided to rbd_do_request().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
When rbd_do_request() is called it allocates and populates an
rbd_req structure to hold information about the osd request to be
sent. This is done for the benefit of the callback function (in
particular, rbd_req_cb()), which uses this in processing when
the request completes.
Synchronous requests provide no callback function, in which case
rbd_do_request() waits for the request to complete before returning.
This case is not handling the needed free of the rbd_req structure
like it should, so it is getting leaked.
Note however that the synchronous case has no need for the rbd_req
structure at all. So rather than simply freeing this structure for
synchronous requests, just don't allocate it to begin with.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The rbd_req_sync_watch() and rbd_req_sync_unwatch() functions are
nearly identical. Combine them into a single function with a flag
indicating whether a watch is to be initiated or torn down.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Each osd message includes a layout structure, and for rbd it is
always the same (at least for osd's in a given pool).
Initialize a layout structure when an rbd_dev gets created and just
copy that into osd requests for the rbd image.
Replace an assertion that was done when initializing the layout
structures with code that catches and handles anything that would
trigger the assertion as soon as it is identified. This precludes
that (bad) condition from ever occurring.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
When rbd_do_request() has a request to process it initializes a ceph
file layout structure and uses it to compute offsets and limits for
the range of the request using ceph_calc_file_object_mapping().
The layout used is fixed, and is based on RBD_MAX_OBJ_ORDER (30).
It sets the layout's object size and stripe unit to be 1 GB (2^30),
and sets the stripe count to be 1.
The job of ceph_calc_file_object_mapping() is to determine which
of a sequence of objects will contain data covered by range, and
within that object, at what offset the range starts. It also
truncates the length of the range at the end of the selected object
if necessary.
This is needed for ceph fs, but for rbd it really serves no purpose.
It does its own blocking of images into objects, echo of which is
(1 << obj_order) in size, and as a result it ignores the "bno"
value returned by ceph_calc_file_object_mapping(). In addition,
by the point a request has reached this function, it is already
destined for a single rbd object, and its length will not exceed
that object's extent. Because of this, and because the mapping will
result in blocking up the range using an integer multiple of the
image's object order, ceph_calc_file_object_mapping() will never
change the offset or length values defined by the request.
In other words, this call is a big no-op for rbd data requests.
There is one exception. We read the header object using this
function, and in that case we will not have already limited the
request size. However, the header is a single object (not a file or
rbd image), and should not be broken into pieces anyway. So in fact
we should *not* be calling ceph_calc_file_object_mapping() when
operating on the header object.
So...
Don't call ceph_calc_file_object_mapping() in rbd_do_request(),
because useless for image data and incorrect to do sofor the image
header.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
This patch gets rid of rbd_calc_raw_layout() by simply open coding
it in its one caller.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
This is the first in a series of patches aimed at eliminating
the use of ceph_calc_raw_layout() by rbd.
It simply pulls in a copy of that function and renames it
rbd_calc_raw_layout().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
We now know that every of rbd_req_sync_op() passes an array of
exactly one operation, as evidenced by all callers passing 1 as its
num_op argument. So get rid of that argument, assuming a single op.
Similarly, we now know that all callers of rbd_do_request() pass 1
as the num_op value, so that parameter can be eliminated as well.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Throughout the rbd code there are spots where it appears we can
handle an osd request containing more than one osd request op.
But that is only the way it appears. In fact, currently only one
operation at a time can be supported, and supporting more than
one will require much more than fleshing out the support that's
there now.
This patch changes names to make it perfectly clear that anywhere
we're dealing with a block of ops, we're in fact dealing with
exactly one of them. We'll be able to simplify some things as
a result.
When multiple op support is implemented, we can update things again
accordingly.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Both ceph_osdc_alloc_request() and ceph_osdc_build_request() are
provided an array of ceph osd request operations. Rather than just
passing the number of operations in the array, the caller is
required append an additional zeroed operation structure to signal
the end of the array.
All callers know the number of operations at the time these
functions are called, so drop the silly zero entry and supply that
number directly. As a result, get_num_ops() is no longer needed.
This also means that ceph_osdc_alloc_request() never uses its ops
argument, so that can be dropped.
Also rbd_create_rw_ops() no longer needs to add one to reserve room
for the additional op.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Add a num_op parameter to rbd_do_request() and rbd_req_sync_op() to
indicate the number of entries in the array. The callers of these
functions always know how many entries are in the array, so just
pass that information down.
This is in anticipation of eliminating the extra zero-filled entry
in these ops arrays.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Only one of the two callers of ceph_osdc_alloc_request() provides
page or bio data for its payload. And essentially all that function
was doing with those arguments was assigning them to fields in the
osd request structure.
Simplify ceph_osdc_alloc_request() by having the caller take care of
making those assignments
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The only thing ceph_osdc_alloc_request() really does with the
flags value it is passed is assign it to the newly-created
osd request structure. Do that in the caller instead.
Both callers subsequently call ceph_osdc_build_request(), so have
that function (instead of ceph_osdc_alloc_request()) issue a warning
if a request comes through with neither the read nor write flags set.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The osdc parameter to ceph_calc_raw_layout() is not used, so get rid
of it. Consequently, the corresponding parameter in calc_layout()
becomes unused, so get rid of that as well.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
A snapshot id must be provided to ceph_calc_raw_layout() even though
it is not needed at all for calculating the layout.
Where the snapshot id *is* needed is when building the request
message for an osd operation.
Drop the snapid parameter from ceph_calc_raw_layout() and pass
that value instead in ceph_osdc_build_request().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The len argument to ceph_osdc_build_request() is set up to be
passed by address, but that function never updates its value
so there's no need to do this. Tighten up the interface by
passing the length directly.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
For some reason, the snapid field of the osd request header is
explicitly set to CEPH_NOSNAP in rbd_do_request(). Just a few lines
later--with no code that would access this field in between--a call
is made to ceph_calc_raw_layout() passing the snapid provided to
rbd_do_request(), which encodes the snapid value it is provided into
that field instead.
In other words, there is no need to fill in CEPH_NOSNAP, and doing
so suggests it might be necessary. Don't do that any more.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The snapc and snapid parameters to rbd_req_sync_op() always take
the values NULL and CEPH_NOSNAP, respectively. So just get rid
of them and use those values where needed.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
All callers of rbd_req_sync_exec() pass CEPH_OSD_FLAG_READ as their
flags argument. Delete that parameter and use CEPH_OSD_FLAG_READ
within the function. If we find a need to support write operations
we can add it back again.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
There is only one caller of rbd_req_sync_read(), and it passes
CEPH_NOSNAP as the snapshot id argument. Delete that parameter
and just use CEPH_NOSNAP within the function.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The last two parameters to ceph_osd_build_request() describe the
object id, but the values passed always come from the osd request
structure whose address is also provided. Get rid of those last
two parameters.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Pull a block of code that initializes the layout structure in an osd
request into its own function so it can be reused.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Dan Mick <dan.mick@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Right now we get the snapshot context for an rbd image (under
protection of the header semaphore) for every request processed.
There's no need to get the snap context if we're doing a read,
so avoid doing so in that case.
Note that we no longer need to hold the header semaphore to
check the rbd_dev's existence flag.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The rbd_device->exists field can be updated asynchronously, changing
from set to clear if a mapped snapshot disappears from the base
image's snapshot context.
Currently, value of the "exists" flag is only read and modified
under protection of the header semaphore, but that will change with
the next patch. Making it atomic ensures this won't be a problem
because the a the non-existence of device will be immediately known.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Now that a big hunk in the middle of rbd_rq_fn() has been moved
into its own routine we can simplify it a little more.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Only one of the three callers of rbd_do_request() provide a
collection structure to aggregate status.
If an error occurs in rbd_do_request(), have the caller
take care of calling rbd_coll_end_req() if necessary in
that one spot.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
In rbd_rq_fn(), requests are fetched from the block layer and each
request is processed, looping through the request's list of bio's
until they've all been consumed.
Separate the handling for a single request into its own function to
make it a bit easier to see what's going on.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The result field in a ceph osd reply header is a signed 32-bit type,
but rbd code often casually uses int to represent it.
The following changes the types of variables that handle this result
value to be "s32" instead of "int" to be completely explicit about
it. Only at the point we pass that result to __blk_end_request()
does the type get converted to the plain old int defined for that
interface.
There is almost certainly no binary impact of this change, but I
prefer to show the exact size and signedness of the value since we
know it.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Dan Mick <dan.mick@inktank.com>
There are spots where a ceph_osds_request pointer variable is given
the name "req". Since we're dealing with (at least) three types of
requests (block layer, rbd, and osd), I find this slightly
distracting.
Change such instances to use "osd_req" consistently to make the
abstraction represented a little more obvious.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Dan Mick <dan.mick@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
There are two names used for items of rbd_request structure type:
"req" and "req_data". The former name is also used to represent
items of pointers to struct ceph_osd_request.
Change all variables that have these names so they are instead
called "rbd_req" consistently.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Dan Mick <dan.mick@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Josh suggested adding warnings to this function to help users
diagnose problems.
Other than memory allocatino errors, there are two places where
errors can be returned. Both represent problems that should
have been caught earlier, and as such might well have been
handled with BUG_ON() calls. But if either ever did manage to
happen, it will be reported.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Add a warning in bio_chain_clone_range() to help a user determine
what exactly might have led to a failure. There is only one; please
say something if you disagree with the following reasoning.
There are three places this can return abnormally:
- Initially, if there is nothing to clone. It turns out that
right now this cannot happen anyway. The test is in place
because the code below it doesn't work if those conditions
don't hold. As such they could be assertions but since I can
return a null to indicate an error I just do that instead.
I have not added a warning here because it won't happen.
- While processing bio's, if none remain but there are supposed
to be more bytes to clone. Here I have added a warning.
- If bio_clone_range() returns a null pointer. That function
will have already produced a warning (at least the first
time, via WARN_ON_ONCE()) to distinguish the cause of the
error. The only exception is memory exhaustion, and I'd
rather not pepper the code with warnings in all those spots.
So no warning is added in that place.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Tell the user (via dmesg) what was wrong with the arguments provided
via /sys/bus/rbd/add.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Dan Mick <dan.mick@inktank.com>
Define a new function rbd_warn() that produces a boilerplate warning
message, identifying in the resulting message the affected rbd
device in the best way available. Use it in a few places that now
use pr_warning().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Dan Mick <dan.mick@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
This replaces two kmalloc()/memcpy() combinations with a single
call to kmemdup().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: David Zafman <david.zafman@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
There is no real benefit to keeping the length of an image id, so
get rid of it.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: David Zafman <david.zafman@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
There may have been a benefit to hanging on to the length of an
image name before, but there is really none now. The only time it's
used is when probing for rbd images, so we can just compute the
length then.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: David Zafman <david.zafman@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Alex Elder