As Daniel suggested, it makes more sense and reduces the conflicts.
Also, while we're at it, tidy up the section title from all lower
letters.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Enable support for HDMI LPE audio mode on Baytrail and
Cherrytrail when HDaudio controller is not detected
Setup minimum required resources during i915_driver_load:
1. Create a platform device to share MMIO/IRQ resources
2. Make the platform device child of i915 device for runtime PM.
3. Create IRQ chip to forward HDMI LPE audio irqs.
HDMI LPE audio driver (a standalone sound driver) probes the
LPE audio device and creates a new sound card.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Jerome Anand <jerome.anand@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The usual small smattering of driver specific fixes. A few bits that
stand out here:
- The R-Car patches adding fallbacks are just adding new compatible
strings to the driver so that device trees are written in a more
robustly future proof fashion, this isn't strictly a fix but it's
just new IDs and it's better to get it into mainline sooner to
improve the ABI.
- The DesignWare "switch to new API part 2" patch is actually a
misleadingly titled fix for a bit that got missed in the original
conversion.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAliA0xcTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0O/kB/9XpR63v5Ej1surlHLJdX7GEk1Oaoy9
CoCHcwBCPfAlLstkVARbvQegdEl3WKZ7FFhIRKhuiW62hVPV8otOv6chyX++zdWo
sYcLHESyuVDydvFdsoMZOvxP22tUNGom6Dhmsf2sXSbWwV/Q2yFahouhAeMPZJ+c
kiZ1OUqae6YIL8EIt0fIFiLp1m2vVpXPLYAYr24a6G4P7nrnLwdMfD2+NnbE9YG8
5zTkFrzh7d7izj3QqGGvW/zMPB7fvP+kY2MdDHx2/lEFjMB4qg/i6C+8bRZGRnWO
FE3Z++LDQZmKpKcPKZlV53yiX1anEpR3mpKGEGSon9zZlBRZhvYJGZtN
=EoLd
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"The usual small smattering of driver specific fixes. A few bits that
stand out here:
- the R-Car patches adding fallbacks are just adding new compatible
strings to the driver so that device trees are written in a more
robustly future proof fashion, this isn't strictly a fix but it's
just new IDs and it's better to get it into mainline sooner to
improve the ABI
- the DesignWare "switch to new API part 2" patch is actually a
misleadingly titled fix for a bit that got missed in the original
conversion"
* tag 'spi-fix-v4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: davinci: use dma_mapping_error()
spi: spi-axi: Free resources on error path
spi: pxa2xx: add missed break
spi: dw-mid: switch to new dmaengine_terminate_* API (part 2)
spi: dw: Make debugfs name unique between instances
spi: sh-msiof: Do not use C++ style comment
spi: armada-3700: Set mode bits correctly
spi: armada-3700: fix unsigned compare than zero on irq
spi: sh-msiof: Add R-Car Gen 2 and 3 fallback bindings
spi: SPI_FSL_DSPI should depend on HAS_DMA
Pull networking fixes from David Miller:
1) Handle multicast packets properly in fast-RX path of mac80211, from
Johannes Berg.
2) Because of a logic bug, the user can't actually force SW
checksumming on r8152 devices. This makes diagnosis of hw
checksumming bugs really annoying. Fix from Hayes Wang.
3) VXLAN route lookup does not take the source and destination ports
into account, which means IPSEC policies cannot be matched properly.
Fix from Martynas Pumputis.
4) Do proper RCU locking in netvsc callbacks, from Stephen Hemminger.
5) Fix SKB leaks in mlxsw driver, from Arkadi Sharshevsky.
6) If lwtunnel_fill_encap() fails, we do not abort the netlink message
construction properly in fib_dump_info(), from David Ahern.
7) Do not use kernel stack for DMA buffers in atusb driver, from Stefan
Schmidt.
8) Openvswitch conntack actions need to maintain a correct checksum,
fix from Lance Richardson.
9) ax25_disconnect() is missing a check for ax25->sk being NULL, in
fact it already checks this, but not in all of the necessary spots.
Fix from Basil Gunn.
10) Action GET operations in the packet scheduler can erroneously bump
the reference count of the entry, making it unreleasable. Fix from
Jamal Hadi Salim. Jamal gives a great set of example command lines
that trigger this in the commit message.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (46 commits)
net sched actions: fix refcnt when GETing of action after bind
net/mlx4_core: Eliminate warning messages for SRQ_LIMIT under SRIOV
net/mlx4_core: Fix when to save some qp context flags for dynamic VST to VGT transitions
net/mlx4_core: Fix racy CQ (Completion Queue) free
net: stmmac: don't use netdev_[dbg, info, ..] before net_device is registered
net/mlx5e: Fix a -Wmaybe-uninitialized warning
ax25: Fix segfault after sock connection timeout
bpf: rework prog_digest into prog_tag
tipc: allocate user memory with GFP_KERNEL flag
net: phy: dp83867: allow RGMII_TXID/RGMII_RXID interface types
ip6_tunnel: Account for tunnel header in tunnel MTU
mld: do not remove mld souce list info when set link down
be2net: fix MAC addr setting on privileged BE3 VFs
be2net: don't delete MAC on close on unprivileged BE3 VFs
be2net: fix status check in be_cmd_pmac_add()
cpmac: remove hopeless #warning
ravb: do not use zero-length alignment DMA descriptor
mlx4: do not call napi_schedule() without care
openvswitch: maintain correct checksum state in conntrack actions
tcp: fix tcp_fastopen unaligned access complaints on sparc
...
Just NAND updates from Boris:
" - Forbid compiling xway NAND controller driver as a module
- Fix tango NAND DT binding and make sure the controller is in a clean
state at probe time
- Add dependency on HAS_IOMEM to the oxnas NAND driver
- Fix irq number validity check in the lpc32xx driver
"
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=AjRR
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20170116' of git://git.infradead.org/linux-mtd
Pull MTD fixes from Brian Norris:
"Just NAND updates from Boris:
- avoid compiling xway NAND controller driver as a module (which
didn't work)
- fix tango NAND DT binding and make sure the controller is in a
clean state at probe time
- add dependency on HAS_IOMEM to the oxnas NAND driver
- fix irq number validity check in the lpc32xx driver"
* tag 'for-linus-20170116' of git://git.infradead.org/linux-mtd:
mtd: nand: lpc32xx: fix invalid error handling of a requested irq
mtd: nand: tango: Reset pbus to raw mode in probe
mtd: nand: tango: Update DT binding description
mtd: nand: oxnas_nand: fix build errors on arch/um, require HAS_IOMEM
mtd: nand: xway: fix build because of module functions
mtd: nand: xway: disable module support
Currently dp83867 driver returns error if phy interface type
PHY_INTERFACE_MODE_RGMII_RXID is used to set the rx only internal
delay. Similarly issue happens for PHY_INTERFACE_MODE_RGMII_TXID.
Fix this by checking also the interface type if a particular delay
value is missing in the phy dt bindings. Also update the DT document
accordingly.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here is a single patch being reverted to remove a feature that was added
in 4.10-rc1 that isn't quite ready for release. It will be redone as a
debugfs file instead of a sysfs file in the future.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWHtr+A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymkJQCfZgr9tNZfzUZxojP6lEIiSAEsDO0Anj8l1ZZf
PRICi50BvVtENhOyE25m
=arvB
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fix from Greg KH:
"Here is a single patch being reverted to remove a feature that was
added in 4.10-rc1 that isn't quite ready for release.
It will be redone as a debugfs file instead of a sysfs file in the
future"
* tag 'driver-core-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Revert "driver core: Add deferred_probe attribute to devices in sysfs"
Pull i2c fixes from Wolfram Sang:
"Bugfixes for I2C. Mostly core this time which is a bit unusual but
nothing really scary in there"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: piix4: Avoid race conditions with IMC
i2c: fix spelling mistake: "insufficent" -> "insufficient"
i2c: print correct device invalid address
i2c: do not enable fall back to Host Notify by default
i2c: fix kernel memory disclosure in dev interface
This reverts commit 6751667a29.
Rob Herring objected to it, and a replacement for it will be added using
debugfs in the future.
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Falling back unconditionally to HostNotify as primary client's interrupt
breaks some drivers which alter their functionality depending on whether
interrupt is present or not, so let's introduce a board flag telling I2C
core explicitly if we want wired interrupt or HostNotify-based one:
I2C_CLIENT_HOST_NOTIFY.
For DT-based systems we introduce "host-notify" property that we convert
to I2C_CLIENT_HOST_NOTIFY board flag.
Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This is a first pass at trying to add documentation for the page_frag
APIs. They may still change over time but for now I thought I would try
to get these documented so that as more network drivers and stack calls
make use of them we have one central spot to document how they are meant
to be used.
Link: http://lkml.kernel.org/r/20170104024157.13451.6758.stgit@localhost.localdomain
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull swiotlb fixes from Konrad Rzeszutek Wilk:
"This has one fix to make i915 work when using Xen SWIOTLB, and a
feature from Geert to aid in debugging of devices that can't do DMA
outside the 32-bit address space.
The feature from Geert is on top of v4.10 merge window commit
(specifically you pulling my previous branch), as his changes were
dependent on the Documentation/ movement patches.
I figured it would just easier than me trying than to cherry-pick the
Documentation patches to satisfy git.
The patches have been soaking since 12/20, albeit I updated the last
patch due to linux-next catching an compiler error and adding an
Tested-and-Reported-by tag"
* 'stable/for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
swiotlb: Export swiotlb_max_segment to users
swiotlb: Add swiotlb=noforce debug option
swiotlb: Convert swiotlb_force from int to enum
x86, swiotlb: Simplify pci_swiotlb_detect_override()
- Fix a device enumeration issue leading to incorrect associations
between ACPI device objects and platform device objects representing
physical devices if the given device object has both _ADR and _HID
(Rafael Wysocki).
- Avoid passing NULL to acpi_put_table() during IOMMU initialization
which triggers a (rightful) warning from ACPICA (Rafael Wysocki).
- Drop an excessive call to acpi_dma_deconfigure() from the core
code that binds ACPI device objects to device objects representing
physical devices (Lorenzo Pieralisi).
- Update an error message in the ACPI WDAT watchdog driver to make it
provide more useful information (Mika Westerberg).
- Add a mechanism to work around issues with unhandled GPE notifications
that occur during system initialization and cannot be prevented by
means of sysfs (Lv Zheng).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=F+Lm
-----END PGP SIGNATURE-----
Merge tag 'acpi-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix a device enumeration problem related to _ADR matching and an
IOMMU initialization issue related to the DMAR table missing, remove
an excessive function call from the core ACPI code, update an error
message in the ACPI WDAT watchdog driver and add a way to work around
problems with unhandled GPE notifications.
Specifics:
- Fix a device enumeration issue leading to incorrect associations
between ACPI device objects and platform device objects
representing physical devices if the given device object has both
_ADR and _HID (Rafael Wysocki).
- Avoid passing NULL to acpi_put_table() during IOMMU initialization
which triggers a (rightful) warning from ACPICA (Rafael Wysocki).
- Drop an excessive call to acpi_dma_deconfigure() from the core code
that binds ACPI device objects to device objects representing
physical devices (Lorenzo Pieralisi).
- Update an error message in the ACPI WDAT watchdog driver to make it
provide more useful information (Mika Westerberg).
- Add a mechanism to work around issues with unhandled GPE
notifications that occur during system initialization and cannot be
prevented by means of sysfs (Lv Zheng)"
* tag 'acpi-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / DMAR: Avoid passing NULL to acpi_put_table()
ACPI / scan: Prefer devices without _HID/_CID for _ADR matching
ACPI / watchdog: Print out error number when device creation fails
ACPI / sysfs: Provide quirk mechanism to prevent GPE flooding
ACPI: Drop misplaced acpi_dma_deconfigure() call from acpi_bind_one()
- Fix a few intel_pstate driver issues: add missing locking it two places,
avoid exposing a useless debugfs interface and keep the attribute
values in sysfs in sync (Rafael Wysocki).
- Drop confusing kernel-doc references related to power management and
ACPI from the driver API manual (Rafael Wysocki).
- Make a false-positive compiler warning in the generic power domains
framework go away (Augusto Mecking Caringi).
- Fix two initialization issues in the devfreq subsystem and update
the MAINTAINERS entry for it (Chanwoo Choi).
- Add a new "compatible" string for APM X-Gene 2 to the generic DT
cpufreq driver (Hoan Tran).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABCAAGBQJYb6TJAAoJEILEb/54YlRxXUEP/RqRWadfoTDYsI58k+2SGwKd
apYDXFCWKeGmJWJJ2G/c7ttaAZasYVqp/IZhQ3QGOwqRlTJdJ3MArs+bIhDz6Ow7
3vshslN/+hNiJcjdcOFQIYRCS1HEmQ//r9IRZ+QQxu3QrRukl1lJFzQb/5GhqvvW
GF4yXK4Ouf10Q47mHweOwU+ojztvr5zRLF6vOh4hlPAIKhGyMNnI6RjjQvymbMbV
7QQt5+Cr9q6vUcqpmpPsG3TJAcyfzQn4djOjYo6Cvt3bbL8ig5bOVj1c4+IxfB7y
VbqSEdAqE6VwvhEYgWKjfU2B4+jWw3QjnhRp0igoGRK32kMommCiL0s8CUi7qTen
MsoXgTUKEWyGcC/eZiD8YEpklclQGIzAsRkO++aebzhMLdIM/681p8CIbsqxXUvf
LWbl32fnsxyDXpSXk/WzUHwCWzDDdILtOXgYO1omp1ik77hupN0wguAWCrHBBrzg
918ntVgYBOWnXnmHhme+im+P7pSlro+8i3uE4g1ieoW4TkiMiNF8qdbkLF5Y06eY
HC6TCTrgCpILAF+ShJO2ptIHgiZwmi0nTogUeikqfA2dUOMIKAnwxwLbH2CbrM8I
LOKxP4K4lZgtPIezYlFOamw/B7kEp6R/zaOAZbaUBqhqrb4RGzMwpETeFhkgx0fR
WotFRFIoGVoUrKNackdZ
=1qsV
-----END PGP SIGNATURE-----
Merge tag 'pm-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a few issues in the intel_pstate driver, a documetation
issue, a false-positive compiler warning in the generic power domains
framework and two problems in the devfreq subsystem. They also update
the MAINTAINERS entry for devfreq and add a new "compatible" string to
the generic cpufreq-dt driver.
Specifics:
- Fix a few intel_pstate driver issues: add missing locking it two
places, avoid exposing a useless debugfs interface and keep the
attribute values in sysfs in sync (Rafael Wysocki).
- Drop confusing kernel-doc references related to power management
and ACPI from the driver API manual (Rafael Wysocki).
- Make a false-positive compiler warning in the generic power domains
framework go away (Augusto Mecking Caringi).
- Fix two initialization issues in the devfreq subsystem and update
the MAINTAINERS entry for it (Chanwoo Choi).
- Add a new "compatible" string for APM X-Gene 2 to the generic DT
cpufreq driver (Hoan Tran)"
* tag 'pm-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: dt: Add support for APM X-Gene 2
PM / devfreq: exynos-bus: Fix the wrong return value
PM / devfreq: Fix the bug of devfreq_add_device when governor is NULL
MAINTAINERS: Add myself as reviewer for DEVFREQ subsystem support
PM / docs: Drop confusing kernel-doc references from infrastructure.rst
PM / domains: Fix 'may be used uninitialized' build warning
cpufreq: intel_pstate: Always keep all limits settings in sync
cpufreq: intel_pstate: Use locking in intel_cpufreq_verify_policy()
cpufreq: intel_pstate: Use locking in intel_pstate_resume()
cpufreq: intel_pstate: Do not expose PID parameters in passive mode
Christmas break. Most of these are relatively unimportant fixes for
regressions introduced during the merge window, and about half of
the changes are for mach-omap2.
A couple of patches are just cleanups and dead code removal that I would
not normally have considered for merging after -rc2, but I decided to
take them along with the fixes this time.
Notable fixes include:
- removing the skeleton.dtsi include broke a number of machines, and we
have to put empty /chosen nodes back to be able to pass kernel command
lines as before
- enabling Samsung platforms no longer hardwires CONFIG_HZ to 200,
as it had been for no good reason for a long time.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=J2uq
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"This is a rather large set of bugfixes, as we just returned from the
Christmas break. Most of these are relatively unimportant fixes for
regressions introduced during the merge window, and about half of the
changes are for mach-omap2.
A couple of patches are just cleanups and dead code removal that I
would not normally have considered for merging after -rc2, but I
decided to take them along with the fixes this time.
Notable fixes include:
- removing the skeleton.dtsi include broke a number of machines, and
we have to put empty /chosen nodes back to be able to pass kernel
command lines as before
- enabling Samsung platforms no longer hardwires CONFIG_HZ to 200, as
it had been for no good reason for a long time"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (46 commits)
MAINTAINERS: extend PSCI entry to cover the newly add PSCI checker code
drivers: psci: annotate timer on stack to silence odebug messages
ARM64: defconfig: enable DRM_MESON as module
ARM64: dts: meson-gx: Add Graphic Controller nodes
ARM64: dts: meson-gxl: fix GPIO include
ARM: dts: imx6: Disable "weim" node in the dtsi files
ARM: dts: qcom: apq8064: Add missing scm clock
ARM: davinci: da8xx: Fix sleeping function called from invalid context
ARM: davinci: Make __clk_{enable,disable} functions public
ARM: davinci: da850: don't add emac clock to lookup table twice
ARM: davinci: da850: fix infinite loop in clk_set_rate()
ARM: i.MX: remove map_io callback
ARM: dts: vf610-zii-dev-rev-b: Add missing newline
ARM: dts: imx6qdl-nitrogen6x: remove duplicate iomux entry
ARM: dts: imx31: fix AVIC base address
ARM: dts: am572x-idk: Add gpios property to control PCIE_RESETn
arm64: dts: vexpress: Support GICC_DIR operations
ARM: dts: vexpress: Support GICC_DIR operations
firmware: arm_scpi: fix reading sensor values on pre-1.0 SCPI firmwares
arm64: dts: msm8996: Add required memory carveouts
...
- Forbid compiling xway NAND controller driver as a module
- Fix tango NAND DT binding and make sure the controller is in a clean
state at probe time
- Add dependency on HAS_IOMEM to the oxnas NAND driver
- Fix irq number validity check in the lpc32xx driver
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJYbVWqAAoJEGXtNgF+CLcAd8kQAJ9m//rpcPf6wkRwzJ8RYqg0
N8V6/7SpA8BfiweWqazWsxOhQgmyz9w7RskuigGPBx8TG4zpVEbJHoOaUTjAHfPN
cjkAbcC2Glv3fdQBLDIfMgibJ4N1JDEjn6uHgaOo4Pe/kO0uGOKk8hNMsNl/5v32
VinL7Fj3phiic8rVDXkJAxMxef/m8ZFYravxh3+jM4NS/Bdjnf8FPBGJGWhs3q13
RMOU18uYWNoEW+nTP1T5qseEzNbZr98h2WgTmK0qG6xsi5ngEFYhiPHAyiYYsaZL
o8rp589yXWopEBEJWijXxKIAGmFJg1J4KaTvgDWaXWVUpOJ4A5cNi0voTme/C380
RSxChC4X57GADRCEjMowLWAXOHez7xx76Gq03qE1A+MeT1Q0j+f0eEycd59Xf5nz
LFEsPX+id+cv12NXCoMNPS3Igrqh78YeqKFkJu29roeJocKHElQVSgm7AyWkQKW+
oHRmJWK6EyH5SV3/LZBmrEbfxemHI48DyRaYjs7qOE9n7mS1A/2D19oNVlmxkWEP
j/jRTy5NZU/A71TIO/xckf4ogewJySH++0Evs3NucKd5I5XiUKKD3BzYTT5WseRq
UCa/qfDTrxVQ1ShHwGdeXD41MnZzT6CiPWVNpjVqJs4+Mk2kyRPnE2bubxUZe7CZ
LH0jw4KA2/R1EaIpSSJx
=Dg9f
-----END PGP SIGNATURE-----
Merge tag 'nand/fixes-for-4.10-rc3' of github.com:linux-nand/linux
From Boris Brezillon:
"""
Fixes for 4.10-rc3
- Forbid compiling xway NAND controller driver as a module
- Fix tango NAND DT binding and make sure the controller is in a clean
state at probe time
- Add dependency on HAS_IOMEM to the oxnas NAND driver
- Fix irq number validity check in the lpc32xx driver
"""
Pull networking fixes from David Miller:
1) stmmac_drv_probe() can race with stmmac_open() because we register
the netdevice too early. Fix from Florian Fainelli.
2) UFO handling in __ip6_append_data() and ip6_finish_output() use
different tests for deciding whether a frame will be fragmented or
not, put them in sync. Fix from Zheng Li.
3) The rtnetlink getstats handlers need to validate that the netlink
request is large enough, fix from Mathias Krause.
4) Use after free in mlx4 driver, from Jack Morgenstein.
5) Fix setting of garbage UID value in sockets during setattr() calls,
from Eric Biggers.
6) Packet drop_monitor doesn't format the netlink messages properly
such that nlmsg_next fails to work, fix from Reiter Wolfgang.
7) Fix handling of wildcard addresses in l2tp lookups, from Guillaume
Nault.
8) __skb_flow_dissect() can crash on pptp packets, from Ian Kumlien.
9) IGMP code doesn't reset group query timers properly, from Michal
Tesar.
10) Fix overzealous MAIN/LOCAL route table combining in ipv4, from
Alexander Duyck.
11) vxlan offload check needs to be more strict in be2net driver, from
Sabrina Dubroca.
12) Moving l3mdev to packet hooks lost RX stat counters unintentionally,
fix from David Ahern.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits)
sh_eth: enable RX descriptor word 0 shift on SH7734
sfc: don't report RX hash keys to ethtool when RSS wasn't enabled
dpaa_eth: Initialize CGR structure before init
dpaa_eth: cleanup after init_phy() failure
net: systemport: Pad packet before inserting TSB
net: systemport: Utilize skb_put_padto()
LiquidIO VF: s/select/imply/ for PTP_1588_CLOCK
libcxgb: fix error check for ip6_route_output()
net: usb: asix_devices: add .reset_resume for USB PM
net: vrf: Add missing Rx counters
drop_monitor: consider inserted data in genlmsg_end
benet: stricter vxlan offloading check in be_features_check
ipv4: Do not allow MAIN to be alias for new LOCAL w/ custom rules
net: macb: Updated resource allocation function calls to new version of API.
net: stmmac: dwmac-oxnas: use generic pm implementation
net: stmmac: dwmac-oxnas: fix fixed-link-phydev leaks
net: stmmac: dwmac-oxnas: fix of-node leak
Documentation/networking: fix typo in mpls-sysctl
igmp: Make igmp group member RFC 3376 compliant
flow_dissector: Update pptp handling to avoid null pointer deref.
...
Pull block layer fixes from Jens Axboe:
"A set of fixes for the current series, one fixing a regression with
block size < page cache size in the alias series from Jan. Outside of
that, two small cleanups for wbt from Bart, a nvme pull request from
Christoph, and a few small fixes of documentation updates"
* 'for-linus' of git://git.kernel.dk/linux-block:
block: fix up io_poll documentation
block: Avoid that sparse complains about context imbalance in __wbt_wait()
block: Make wbt_wait() definition consistent with declaration
clean_bdev_aliases: Prevent cleaning blocks that are not in block range
genhd: remove dead and duplicated scsi code
block: add back plugging in __blkdev_direct_IO
nvmet/fcloop: remove some logically dead code performing redundant ret checks
nvmet: fix KATO offset in Set Features
nvme/fc: simplify error handling of nvme_fc_create_hw_io_queues
nvme/fc: correct some printk information
nvme/scsi: Remove START STOP emulation
nvme/pci: Delete misleading queue-wrap comment
nvme/pci: Fix whitespace problem
nvme: simplify stripe quirk
nvme: update maintainers information
to deal with various regressions noticed during the merge
window and to fix various device tree configurations for
boards. Also included is removal of mach-omap2/gpio.c that
is now dead code with device tree based booting that should
be OK for the early -rc cycle:
- A series of fixes to add empty chosen node to fix regressions
caused for bootloaders that don't create chosen node as the
decompressor needs the chosen node to merge command line and
ATAGs into it
- Fix missing logicpd-som-lv-37xx-devkit.dtb entry in Makefile
- Fix regression for am437x timers
- Fix wrong strcat for non-NULL terminated string
- A series of changes to fix tps65217 interrupts to not use
defines as we don't do that for interrupts
- Two patches to fix USB VBUS detection on am57xx-idk and force it
to peripheral mode until dwc3 role detection is working
- Add missing dra72-evm-tps65917 missing voltage supplies
accidentally left out of an earlier patch
- Fix n900 eMMC detection when booted on qemu
- Remove unwanted pr_err on failed memory allocation for
prm_common.c
- Remove legacy mach-omap2/gpio.c that now is dead code
since we boot mach-omap2 in device tree only mode
- Fix am572x-idk pcie1 by adding the missing gpio reset pin
-----BEGIN PGP SIGNATURE-----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=UNWK
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.10/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Pull "omap fixes for v4.10-rc cycle" from Tony Lindgren:
Fist set of fixes for omaps for v4.10-rc cycle, mostly
to deal with various regressions noticed during the merge
window and to fix various device tree configurations for
boards. Also included is removal of mach-omap2/gpio.c that
is now dead code with device tree based booting that should
be OK for the early -rc cycle:
- A series of fixes to add empty chosen node to fix regressions
caused for bootloaders that don't create chosen node as the
decompressor needs the chosen node to merge command line and
ATAGs into it
- Fix missing logicpd-som-lv-37xx-devkit.dtb entry in Makefile
- Fix regression for am437x timers
- Fix wrong strcat for non-NULL terminated string
- A series of changes to fix tps65217 interrupts to not use
defines as we don't do that for interrupts
- Two patches to fix USB VBUS detection on am57xx-idk and force it
to peripheral mode until dwc3 role detection is working
- Add missing dra72-evm-tps65917 missing voltage supplies
accidentally left out of an earlier patch
- Fix n900 eMMC detection when booted on qemu
- Remove unwanted pr_err on failed memory allocation for
prm_common.c
- Remove legacy mach-omap2/gpio.c that now is dead code
since we boot mach-omap2 in device tree only mode
- Fix am572x-idk pcie1 by adding the missing gpio reset pin
* tag 'omap-for-v4.10/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (23 commits)
ARM: dts: am572x-idk: Add gpios property to control PCIE_RESETn
ARM: OMAP2+: PRM: Delete an error message for a failed memory allocation
ARM: dts: n900: Mark eMMC slot with no-sdio and no-sd flags
ARM: dts: dra72-evm-tps65917: Add voltage supplies to usb_phy, mmc, dss
ARM: dts: am57xx-idk: Put USB2 port in peripheral mode
ARM: dts: am57xx-idk: Support VBUS detection on USB2 port
dt-bindings: input: Specify the interrupt number of TPS65217 power button
dt-bindings: power/supply: Update TPS65217 properties
dt-bindings: mfd: Remove TPS65217 interrupts
ARM: dts: am335x: Fix the interrupt name of TPS65217
ARM: omap2+: fixing wrong strcat for Non-NULL terminated string
ARM: omap2+: am437x: rollback to use omap3_gptimer_timer_init()
ARM: dts: omap3: Add DTS for Logic PD SOM-LV 37xx Dev Kit
ARM: dts: dra7: Add an empty chosen node to top level DTSI
ARM: dts: dm816x: Add an empty chosen node to top level DTSI
ARM: dts: dm814x: Add an empty chosen node to top level DTSI
ARM: dts: am4372: Add an empty chosen node to top level DTSI
ARM: dts: am33xx: Add an empty chosen node to top level DTSI
ARM: dts: omap5: Add an empty chosen node to top level DTSI
ARM: dts: omap4: Add an empty chosen node to top level DTSI
...
Visually separate register ranges (address/size pairs) in reg prop.
Change DMA channel name, for consistency with other drivers.
Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
The references to drivers/base/power/main.c and
drivers/acpi/scan.c from Documentation/driver-api/infrastructure.rst
are confusing. They both cause descriptions of functions that are
not relevant to device drivers at all to be generated and none of
them is sufficient to cover the API in a meaningful way.
Drop them for now.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Rather than hoping for good behavior by marking some elements
internal, enforce it by making the entire structure private and
creating an accessor function for the one useful external field.
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Jike Song <jike.song@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed by: Kirti Wankhede <kwankhede@nvidia.com>
Add an mdev_ prefix so we're not poluting the namespace so much.
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Jike Song <jike.song@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed by: Kirti Wankhede <kwankhede@nvidia.com>
In the actual implementation ether_addr_equal function tests for equality to 0
when returning. It seems in commit 0d74c4 it is somehow overlooked to change
this operator to reflect the actual function.
Signed-off-by: Cihangir Akturk <cakturk@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The 80211.tmpl DocBook file was removed in commit 819bf59376 ("docs-rst:
sphinxify 802.11 documentation"), but the 80211.xml target was re-added to
the Makefile by commit 7ddedebb03 ("ALSA: doc: ReSTize
writing-an-alsa-driver document"), leading to a failure when building the
documentation:
*** No rule to make target 'Documentation/DocBook/80211.xml', needed by
'Documentation/DocBook/80211.aux.xml'.
cc: stable@vger.kernel.org
Signed-off-by: John Brooks <john@fastquake.com>
Mea-culpa-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Specify the power button interrupt number which is from the datasheet.
Signed-off-by: Milo Kim <woogyom.kim@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add interrupt specifiers for USB and AC charger input. Interrupt numbers
are from the datasheet.
Fix wrong property for compatible string.
Signed-off-by: Milo Kim <woogyom.kim@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Sometimes, the users may require a quirk to be provided from ACPI subsystem
core to prevent a GPE from flooding.
Normally, if a GPE cannot be dispatched, ACPICA core automatically prevents
the GPE from firing. But there are cases the GPE is dispatched by _Lxx/_Exx
provided via AML table, and OSPM is lacking of the knowledge to get
_Lxx/_Exx correctly executed to handle the GPE, thus the GPE flooding may
still occur.
The existing quirk mechanism can be enabled/disabled using the following
commands to prevent such kind of GPE flooding during runtime:
# echo mask > /sys/firmware/acpi/interrupts/gpe00
# echo unmask > /sys/firmware/acpi/interrupts/gpe00
To avoid GPE flooding during boot, we need a boot stage mechanism.
This patch provides such a boot stage quirk mechanism to stop this kind of
GPE flooding. This patch doesn't fix any feature gap but since the new
feature gaps could be found in the future endlessly, and can disappear if
the feature gaps are filled, providing a boot parameter rather than a DMI
table should suffice.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=53071
Link: https://bugzilla.kernel.org/show_bug.cgi?id=117481
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/887793
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull x86 fixes from Ingo Molnar:
"There's a number of fixes:
- a round of fixes for CPUID-less legacy CPUs
- a number of microcode loader fixes
- i8042 detection robustization fixes
- stack dump/unwinder fixes
- x86 SoC platform driver fixes
- a GCC 7 warning fix
- virtualization related fixes"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
Revert "x86/unwind: Detect bad stack return address"
x86/paravirt: Mark unused patch_default label
x86/microcode/AMD: Reload proper initrd start address
x86/platform/intel/quark: Add printf attribute to imr_self_test_result()
x86/platform/intel-mid: Switch MPU3050 driver to IIO
x86/alternatives: Do not use sync_core() to serialize I$
x86/topology: Document cpu_llc_id
x86/hyperv: Handle unknown NMIs on one CPU when unknown_nmi_panic
x86/asm: Rewrite sync_core() to use IRET-to-self
x86/microcode/intel: Replace sync_core() with native_cpuid()
Revert "x86/boot: Fail the boot if !M486 and CPUID is missing"
x86/asm/32: Make sync_core() handle missing CPUID on all 32-bit kernels
x86/cpu: Probe CPUID leaf 6 even when cpuid_level == 6
x86/tools: Fix gcc-7 warning in relocs.c
x86/unwind: Dump stack data on warnings
x86/unwind: Adjust last frame check for aligned function stacks
x86/init: Fix a couple of comment typos
x86/init: Remove i8042_detect() from platform ops
Input: i8042 - Trust firmware a bit more when probing on X86
x86/init: Add i8042 state to the platform data
...
This is mostly stuff which missed the initial pull. There's a new
driver: qedi, some ufs, ibmvscsis and ncr5380 updates plus some
assorted driver fixes and also a fix for the bug where if a device
goes into a blocked state between configuration and sysfs device add
(which can be a long time under async probing) it would become
permanently blocked.
Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Zofc
-----END PGP SIGNATURE-----
Merge tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull late SCSI updates from James Bottomley:
"This is mostly stuff which missed the initial pull.
There's a new driver: qedi, and some ufs, ibmvscsis and ncr5380
updates plus some assorted driver fixes and also a fix for the bug
where if a device goes into a blocked state between configuration and
sysfs device add (which can be a long time under async probing) it
would become permanently blocked"
* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (30 commits)
scsi: avoid a permanent stop of the scsi device's request queue
scsi: mpt3sas: Recognize and act on iopriority info
scsi: qla2xxx: Fix Target mode handling with Multiqueue changes.
scsi: qla2xxx: Add Block Multi Queue functionality.
scsi: qla2xxx: Add multiple queue pair functionality.
scsi: qla2xxx: Utilize pci_alloc_irq_vectors/pci_free_irq_vectors calls.
scsi: qla2xxx: Only allow operational MBX to proceed during RESET.
scsi: hpsa: remove memory allocate failure message
scsi: Update 3ware driver email addresses
scsi: zfcp: fix rport unblock race with LUN recovery
scsi: zfcp: do not trace pure benign residual HBA responses at default level
scsi: zfcp: fix use-after-"free" in FC ingress path after TMF
scsi: libcxgbi: return error if interface is not up
scsi: cxgb4i: libcxgbi: add missing module_put()
scsi: cxgb4i: libcxgbi: cxgb4: add T6 iSCSI completion feature
scsi: cxgb4i: libcxgbi: add active open cmd for T6 adapters
scsi: cxgb4i: use cxgb4_tp_smt_idx() to get smt_idx
scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.
scsi: aacraid: remove wildcard for series 9 controllers
scsi: ibmvscsi: add write memory barrier to CRQ processing
...
- Further fix thread wake-up for requests
- Use a bounce buffer to fix DMA issue for SSR register read
MMC host:
- sdhci: Fix a regression for runtime PM
- sdhci-cadence: Add a proper SoC specific DT compatible
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=PDPZ
-----END PGP SIGNATURE-----
Merge tag 'mmc-v4.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- further fix thread wake-up for requests
- use a bounce buffer to fix DMA issue for SSR register read
MMC host:
- sdhci: Fix a regression for runtime PM
- sdhci-cadence: Add a proper SoC specific DT compatible"
* tag 'mmc-v4.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sd: Meet alignment requirements for raw_ssr DMA
mmc: core: Further fix thread wake-up
mmc: sdhci: Fix to handle MMC_POWER_UNDEFINED
mmc: sdhci-cadence: add Socionext UniPhier specific compatible string
Pull x86 cache allocation interface from Thomas Gleixner:
"This provides support for Intel's Cache Allocation Technology, a cache
partitioning mechanism.
The interface is odd, but the hardware interface of that CAT stuff is
odd as well.
We tried hard to come up with an abstraction, but that only allows
rather simple partitioning, but no way of sharing and dealing with the
per package nature of this mechanism.
In the end we decided to expose the allocation bitmaps directly so all
combinations of the hardware can be utilized.
There are two ways of associating a cache partition:
- Task
A task can be added to a resource group. It uses the cache
partition associated to the group.
- CPU
All tasks which are not member of a resource group use the group to
which the CPU they are running on is associated with.
That allows for simple CPU based partitioning schemes.
The main expected user sare:
- Virtualization so a VM can only trash only the associated part of
the cash w/o disturbing others
- Real-Time systems to seperate RT and general workloads.
- Latency sensitive enterprise workloads
- In theory this also can be used to protect against cache side
channel attacks"
[ Intel RDT is "Resource Director Technology". The interface really is
rather odd and very specific, which delayed this pull request while I
was thinking about it. The pull request itself came in early during
the merge window, I just delayed it until things had calmed down and I
had more time.
But people tell me they'll use this, and the good news is that it is
_so_ specific that it's rather independent of anything else, and no
user is going to depend on the interface since it's pretty rare. So if
push comes to shove, we can just remove the interface and nothing will
break ]
* 'x86-cache-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
x86/intel_rdt: Implement show_options() for resctrlfs
x86/intel_rdt: Call intel_rdt_sched_in() with preemption disabled
x86/intel_rdt: Update task closid immediately on CPU in rmdir and unmount
x86/intel_rdt: Fix setting of closid when adding CPUs to a group
x86/intel_rdt: Update percpu closid immeditately on CPUs affected by changee
x86/intel_rdt: Reset per cpu closids on unmount
x86/intel_rdt: Select KERNFS when enabling INTEL_RDT_A
x86/intel_rdt: Prevent deadlock against hotplug lock
x86/intel_rdt: Protect info directory from removal
x86/intel_rdt: Add info files to Documentation
x86/intel_rdt: Export the minimum number of set mask bits in sysfs
x86/intel_rdt: Propagate error in rdt_mount() properly
x86/intel_rdt: Add a missing #include
MAINTAINERS: Add maintainer for Intel RDT resource allocation
x86/intel_rdt: Add scheduler hook
x86/intel_rdt: Add schemata file
x86/intel_rdt: Add tasks files
x86/intel_rdt: Add cpus file
x86/intel_rdt: Add mkdir to resctrl file system
x86/intel_rdt: Add "info" files to resctrl file system
...
Pull networking fixes and cleanups from David Miller:
1) Use rb_entry() instead of hardcoded container_of(), from Geliang
Tang.
2) Use correct memory barriers in stammac driver, from Pavel Machek.
3) Fix assoc bind address handling in SCTP, from Xin Long.
4) Make the length check for UFO handling consistent between
__ip_append_data() and ip_finish_output(), from Zheng Li.
5) HSI driver compatible strings were busted fro hix5hd2, from Dongpo
Li.
6) Handle devm_ioremap() errors properly in cavium driver, from Arvind
Yadav.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (22 commits)
RDS: use rb_entry()
net_sched: sch_netem: use rb_entry()
net_sched: sch_fq: use rb_entry()
net/mlx5: use rb_entry()
ethernet: sfc: Add Kconfig entry for vendor Solarflare
sctp: not copying duplicate addrs to the assoc's bind address list
sctp: reduce indent level in sctp_copy_local_addr_list
ARM: dts: hix5hd2: don't change the existing compatible string
net: hix5hd2_gmac: fix compatible strings name
openvswitch: Add a missing break statement.
net: netcp: ethss: fix 10gbe host port tx pri map configuration
net: netcp: ethss: fix errors in ethtool ops
fsl/fman: enable compilation on ARM64
fsl/fman: A007273 only applies to PPC SoCs
powerpc: fsl/fman: remove fsl,fman from of_device_ids[]
fsl/fman: fix 1G support for QSGMII interfaces
dt: bindings: net: use boolean dt properties for eee broken modes
net: phy: use boolean dt properties for eee broken modes
net: phy: fix sign type error in genphy_config_eee_advert
ipv4: Should use consistent conditional judgement for ip fragment in __ip_append_data and ip_finish_output
...
Merge final set of updates from Andrew Morton:
- a series to make IMA play better across kexec
- a handful of random fixes
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
printk: fix typo in CONSOLE_LOGLEVEL_DEFAULT help text
ratelimit: fix WARN_ON_RATELIMIT return value
kcov: make kcov work properly with KASLR enabled
arm64: setup: introduce kaslr_offset()
mm: fadvise: avoid expensive remote LRU cache draining after FADV_DONTNEED
ima: platform-independent hash value
ima: define a canonical binary_runtime_measurements list format
ima: support restoring multiple template formats
ima: store the builtin/custom template definitions in a list
ima: on soft reboot, save the measurement list
powerpc: ima: send the kexec buffer to the next kernel
ima: maintain memory size needed for serializing the measurement list
ima: permit duplicate measurement list entries
ima: on soft reboot, restore the measurement list
powerpc: ima: get the kexec buffer passed by the previous kernel
developers, in their wisdom, broke the API in the 0.13 release. This fix
detects the breakage and allows the docs to be built with both the old and
new versions.
-----BEGIN PGP SIGNATURE-----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=h7OP
-----END PGP SIGNATURE-----
Merge tag 'doc-4.10-3' of git://git.lwn.net/linux
Pull documentation fix from Jonathan Corbet:
"A single fix for the build system.
It would appear that the docutils developers, in their wisdom, broke
the API in the 0.13 release. This fix detects the breakage and allows
the docs to be built with both the old and new versions"
* tag 'doc-4.10-3' of git://git.lwn.net/linux:
docs: sphinx-extensions: make rstFlatTable work with docutils 0.13
The SoC hix5hd2 compatible string has the suffix "-gmac" and
we should not change its compatible string.
So we should name all the compatible string with the suffix "-gmac".
Creating a new name suffix "-gemac" is unnecessary.
We also add another SoC compatible string in dt binding documentation
and describe which generic version the SoC belongs to.
Fixes: d0fb6ba75d ("net: hix5hd2_gmac: add generic compatible string")
Signed-off-by: Dongpo Li <lidongpo@hisilicon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The patches regarding eee-broken-modes was merged before all people
involved could find an agreement on the best way to move forward.
While we agreed on having a DT property to mark particular modes as broken,
the value used for eee-broken-modes mapped the phy register in very direct
way. Because of this, the concern is that it could be used to implement
configuration policies instead of describing a broken HW.
In the end, having a boolean property for each mode seems to be preferred
over one bit field value mapping the register (too) directly.
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The IMA binary_runtime_measurements list is currently in platform native
format.
To allow restoring a measurement list carried across kexec with a
different endianness than the targeted kernel, this patch defines
little-endian as the canonical format. For big endian systems wanting
to save/restore the measurement list from a system with a different
endianness, a new boot command line parameter named "ima_canonical_fmt"
is defined.
Considerations: use of the "ima_canonical_fmt" boot command line option
will break existing userspace applications on big endian systems
expecting the binary_runtime_measurements list to be in platform native
format.
Link: http://lkml.kernel.org/r/1480554346-29071-10-git-send-email-zohar@linux.vnet.ibm.com
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andreas Steffen <andreas.steffen@strongswan.org>
Cc: Josh Sklar <sklar@linux.vnet.ibm.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a Socionext SoC specific compatible (suggested by Rob Herring).
No SoC specific data are associated with the compatible strings for
now, but other SoC vendors may use this IP and want to differentiate
IP variants in the future.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
It means different things on Intel and AMD so write it down so that
there's no confusion.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yazen Ghannam <yazen.ghannam@amd.com>
Link: http://lkml.kernel.org/r/20161117094557.jm6hwzdd52h7iwnj@pd.tnic
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
lockdep/might_sleep splat has a real fix provided by Andrea.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJYV/xYAAoJEL/70l94x66DalgH/0dMqN9nGDJfCR3tmEJEs4AH
WiFFsu7rHfXac2QeO5Eq30XLFghQjlcj9GkBYgF33wU/VMQ7xcDje+lHKQZ8e4b/
gc4BSwDGPpWW6IXfVVeMz9Zxfi7WE6J03kQQ+uxDbwaF65AsrSQQq5SCgcmo8Gof
SS138Ws6v5/Us/UAJNI8x5xhcJnE4p4YV2yzTIJkKmZDEAYY9Y9CuKd3na4lRjoc
Seuigldo1zY6oYF1Xqwb1efik1xTH4oJdmG8dnf1fvBw0P70Gs4s1eFXm6TFQhTK
mdZxfxMw0YtzxroAMwXNjPcTy+Sn4Zx47dpHMspnN2cPePw53YfPS25en9/W09g=
=jQbY
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Early fixes for x86.
Instead of the (botched) revert, the lockdep/might_sleep splat has a
real fix provided by Andrea"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: nVMX: Allow L1 to intercept software exceptions (#BP and #OF)
kvm: take srcu lock around kvm_steal_time_set_preempted()
kvm: fix schedule in atomic in kvm_steal_time_set_preempted()
KVM: hyperv: fix locking of struct kvm_hv fields
KVM: x86: Expose Intel AVX512IFMA/AVX512VBMI/SHA features to guest.
kvm: nVMX: Correct a VMX instruction error code for VMPTRLD
On architectures like arm64, swiotlb is tied intimately to the core
architecture DMA support. In addition, ZONE_DMA cannot be disabled.
To aid debugging and catch devices not supporting DMA to memory outside
the 32-bit address space, add a kernel command line option
"swiotlb=noforce", which disables the use of bounce buffers.
If specified, trying to map memory that cannot be used with DMA will
fail, and a rate-limited warning will be printed.
Note that io_tlb_nslabs is set to 1, which is the minimal supported
value.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Takashi Iwai