Remove local variable that is then used just once and replace it with
fs_info::csum_size.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The fs_info value is 32bit, switch also the local u16 variables. This
leads to a better assembly code generated due to movzwl.
This simple change will shave some bytes on x86_64 and release config:
text data bss dec hex filename
1090000 17980 14912 1122892 11224c pre/btrfs.ko
1089794 17980 14912 1122686 11217e post/btrfs.ko
DELTA: -206
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_get_16 shows up in the system performance profiles (helper to read
16bit values from on-disk structures). This is partially because of the
checksum size that's frequently read along with data reads/writes, other
u16 uses are from item size or directory entries.
Replace all calls to btrfs_super_csum_size by the cached value from
fs_info.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_csum_bytes_to_leaves shows up in system profiles, which makes it a
candidate for optimizations. After the 64bit division has been replaced
by shift, there's still a calculation done each time the function is
called: checksums per leaf.
As this is a constant value for the entire filesystem lifetime, we
can calculate it once at mount time and reuse. This also allows to
reduce the division to 64bit/32bit as we know the constant will always
fit the 32bit type.
Replace the open-coded rounding up with a macro that internally handles
the 64bit division and as it's now a short function, make it static
inline (slight code increase, slight stack usage reduction).
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In many places we need the checksum size and it is inefficient to read
it from the raw superblock. Store the value into fs_info, actual use
will be in followup patches. The size is u32 as it allows to generate
better assembly than with u16.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The value of super_block::s_blocksize_bits is the same as
fs_info::sectorsize_bits, but we don't need to do the extra dereferences
in many functions and storing the bits as u32 (in fs_info) generates
shorter assembly.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Change free_space_bitmap_size to take btrfs_fs_info so we can get the
sectorsize_bits to do calculations.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We do a lot of calculations where we divide or multiply by sectorsize.
We also know and make sure that sectorsize is a power of two, so this
means all divisions can be turned to shifts and avoid eg. expensive
u64/u32 divisions.
The type is u32 as it's more register friendly on x86_64 compared to u8
and the resulting assembly is smaller (movzbl vs movl).
There's also superblock s_blocksize_bits but it's usually one more
pointer dereference farther than fs_info.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The variable @page_size in submit_extent_page() is not related to page
size.
It can already be smaller than PAGE_SIZE, so rename it to io_size to
reduce confusion, this is especially important for later subpage
support.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we're reading partial page, btrfs will warn about this as read/write
is always done in sector size, which now equals page size.
But for the upcoming subpage read-only support, our data read is only
aligned to sectorsize, which can be smaller than page size.
Thus here we change the warning condition to check it against
sectorsize, the behavior is not changed for regular sectorsize ==
PAGE_SIZE case, and won't report error for subpage read.
Also, pass the proper start/end with bv_offset for check_data_csum() to
handle.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Function process_pages_contig() does not only handle page locking but
also other operations. Rename the local variable pages_locked to
pages_processed to reduce confusion.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For check_data_csum(), the page we're using is directly from the inode
mapping, thus it has valid page_offset().
We can use (page_offset() + pg_off) to replace @start parameter
completely, while the @len should always be sectorsize.
Since we're here, also add some comment, as there are quite some
confusion in words like start/offset, without explaining whether it's
file_offset or logical bytenr.
This should not affect the existing behavior, as for current sectorsize
== PAGE_SIZE case, @pgoff should always be 0, and len is always
PAGE_SIZE (or sectorsize from the dio read path).
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All callers of btrfs_wq_submit_bio() pass struct inode as @private_data,
so there is no need for it to be (void *), replace it with "struct inode
*inode".
While we can extract fs_info from struct inode, also remove the @fs_info
parameter.
Since we're here, also replace all the (void *private_data) into (struct
inode *inode).
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The @failed_start parameter is only paired with @exclusive_bits, and
those parameters are only used for EXTENT_LOCKED bit, which have their
own wrappers lock_extent_bits().
Thus for regular set_extent_bit() calls, the failed_start makes no
sense, just sink the parameter.
Also, since @failed_start and @exclusive_bits are used in pairs, add
an assert to make it obvious.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The pitfall here is, if the parameter @bits has multiple bits set, we
will return the first range which just has one of the specified bits
set.
This is a little tricky if we want an exact match. Anyway, update the
comment to make that clear.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The return value of that function is completely wrong.
That function only returns 0 if the extent buffer doesn't need to be
submitted. The "ret = 1" and "ret = 0" are determined by the return
value of "test_and_clear_bit(EXTENT_BUFFER_DIRTY, &eb->bflags)".
And if we get ret == 1, it's because the extent buffer is dirty, and we
set its status to EXTENT_BUFFER_WRITE_BACK, and continue to page
locking.
While if we get ret == 0, it means the extent is not dirty from the
beginning, so we don't need to write it back.
The caller also follows this, in btree_write_cache_pages(), if
lock_extent_buffer_for_io() returns 0, we just skip the extent buffer
completely.
So the comment is completely wrong.
Since we're here, also change the description a little. The write bio
flushing won't be visible to the caller, thus it's not an major feature.
In the main description, only describe the locking part to make the
point more clear.
For reference, added in commit 2e3c25136a ("btrfs: extent_io: add
proper error handling to lock_extent_buffer_for_io()")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Long time ago the explicit casts were necessary for u64 but we don't
need it. Remove casts where the type matches, leaving only cases that
cast sector_t or loff_t.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The drop_level member is used directly unlike all the other int types in
root_item. Add the definition and use it everywhere. The type is u8 so
there's no conversion necessary and the helpers are properly inlined,
this is for consistency.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For consistency use the available helpers to set flags and limit.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's one raw use of le->cpu conversion but we have a helper to do
that for us, so use it.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have helpers to access the on-disk item members, use that for
root_item::ctransid instead of raw le64_to_cpu.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The names in btrfs_lockdep_keysets are generated from a simple pattern
using snprintf but we can generate them directly with some macro magic
and remove the helpers.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
BTRFS_MAX_LEVEL is 8 and the keyset table is supposed to have a key for
each level, but we'll never have more than 8 levels. The values passed
to btrfs_set_buffer_lockdep_class are always derived from a valid extent
buffer. Set the array sizes to the right value.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This effectively reverts 09745ff88d93 ("btrfs: dio iomap DSYNC
workaround") now that the iomap API has been updated to allow
iomap_dio_complete() not to be called under i_rwsem anymore.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If direct writes are called with O_DIRECT | O_DSYNC, it will result in a
deadlock because iomap_dio_rw() is called under i_rwsem which calls:
iomap_dio_complete()
generic_write_sync()
btrfs_sync_file()
btrfs_sync_file() requires i_rwsem, so call __iomap_dio_rw() with the
i_rwsem locked, and call iomap_dio_complete() after unlocking i_rwsem.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The inode dio_sem can be eliminated because all DIO synchronization is
now performed through inode->i_rwsem that provides the same guarantees.
This reduces btrfs_inode size by 40 bytes.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Direct writes within EOF are safe to be performed with inode shared lock
to improve parallelization with other direct writes or reads because EOF
is not changed and there is no race with truncate().
Direct reads are already performed under shared inode lock.
This patch is precursor to removing btrfs_inode->dio_sem.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Push inode locking and unlocking closer to where we perform the I/O. For
this we need to move the write checks inside the respective functions as
well.
pos is evaluated after generic_write_checks because O_APPEND can change
iocb->ki_pos.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_inode_lock/unlock() are wrappers around inode locks, separating
the type of lock and actual locking.
- 0 - default, exclusive lock
- BTRFS_ILOCK_SHARED - for shared locks, for possible parallel DIO
- BTRFS_ILOCK_TRY - for the RWF_NOWAIT sequence
The bits SHARED and TRY can be combined together.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_write_check() checks write parameters in one place before
beginning a write. This does away with inode_unlock() after every check.
In the later patches, it will help push inode_lock/unlock() in buffered
and direct write functions respectively.
generic_write_checks needs to be called before as it could truncate
iov_iter and its return used as count.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
fs_info::fs_state is a filesystem bit check as opposed to inode and can
be performed before we begin with write checks. This eliminates inode
lock/unlock in case the error bit is set.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While we do this, correct the call to pagecache_isize_extended:
- pagecache_isize_extended needs to be called to the start of the write
as opposed to i_size
- we don't need to check range before the call, this is done in the
function
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The read and write DIO don't have anything in common except for the
call to iomap_dio_rw. Extract the write call into a new function to get
rid of conditional statements for direct write.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Add
/sys/fs/btrfs/UUID/read_policy
attribute so that the read policy for the raid1, raid1c34 and raid10 can
be tuned.
When this attribute is read, it will show all available policies, with
active policy in [ ]. The read_policy attribute can be written using one
of the items listed in there.
For example:
$ cat /sys/fs/btrfs/UUID/read_policy
[pid]
$ echo pid > /sys/fs/btrfs/UUID/read_policy
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As of now, we use the pid method to read striped mirrored data, which
means process id determines the stripe id to read. This type of routing
typically helps in a system with many small independent processes tying
to read random data. On the other hand, the pid based read IO policy is
inefficient because if there is a single process trying to read a large
file, the overall disk bandwidth remains underutilized.
So this patch introduces a read policy framework so that we could add
more read policies, such as IO routing based on the device's wait-queue
or manual when we have a read-preferred device or a policy based on the
target storage caching.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add a generic helper to match the string in a given buffer, and ignore
the leading and trailing whitespace.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ rename variables, add comments ]
Signed-off-by: David Sterba <dsterba@suse.com>
We do not need anymore to start writeback for delalloc of roots that are
being snapshotted and wait for it to complete. This was done in commit
609e804d77 ("Btrfs: fix file corruption after snapshotting due to mix
of buffered/DIO writes") to fix a type of file corruption where files in a
snapshot end up having their i_size updated in a non-ordered way, leaving
implicit file holes, when buffered IO writes that increase a file's size
are followed by direct IO writes that also increase the file's size.
This is not needed anymore because we now have a more generic mechanism
to prevent a non-ordered i_size update since commit 9ddc959e80
("btrfs: use the file extent tree infrastructure"), which addresses this
scenario involving snapshots as well.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Historically we've implemented our own locking because we wanted to be
able to selectively spin or sleep based on what we were doing in the
tree. For instance, if all of our nodes were in cache then there's
rarely a reason to need to sleep waiting for node locks, as they'll
likely become available soon. At the time this code was written the
rw_semaphore didn't do adaptive spinning, and thus was orders of
magnitude slower than our home grown locking.
However now the opposite is the case. There are a few problems with how
we implement blocking locks, namely that we use a normal waitqueue and
simply wake everybody up in reverse sleep order. This leads to some
suboptimal performance behavior, and a lot of context switches in highly
contended cases. The rw_semaphores actually do this properly, and also
have adaptive spinning that works relatively well.
The locking code is also a bit of a bear to understand, and we lose the
benefit of lockdep for the most part because the blocking states of the
lock are simply ad-hoc and not mapped into lockdep.
So rework the locking code to drop all of this custom locking stuff, and
simply use a rw_semaphore for everything. This makes the locking much
simpler for everything, as we can now drop a lot of cruft and blocking
transitions. The performance numbers vary depending on the workload,
because generally speaking there doesn't tend to be a lot of contention
on the btree. However, on my test system which is an 80 core single
socket system with 256GiB of RAM and a 2TiB NVMe drive I get the
following results (with all debug options off):
dbench 200 baseline
Throughput 216.056 MB/sec 200 clients 200 procs max_latency=1471.197 ms
dbench 200 with patch
Throughput 737.188 MB/sec 200 clients 200 procs max_latency=714.346 ms
Previously we also used fs_mark to test this sort of contention, and
those results are far less impressive, mostly because there's not enough
tasks to really stress the locking
fs_mark -d /d[0-15] -S 0 -L 20 -n 100000 -s 0 -t 16
baseline
Average Files/sec: 160166.7
p50 Files/sec: 165832
p90 Files/sec: 123886
p99 Files/sec: 123495
real 3m26.527s
user 2m19.223s
sys 48m21.856s
patched
Average Files/sec: 164135.7
p50 Files/sec: 171095
p90 Files/sec: 122889
p99 Files/sec: 113819
real 3m29.660s
user 2m19.990s
sys 44m12.259s
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Just open code it in its sole caller and remove a level of indirection.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we have the building blocks for some better recovery options
with corrupted file systems, add a rescue=all option to enable all of
the relevant rescue options. This will allow distros to simply default
to rescue=all for the "oh dear lord the world's on fire" recovery
without needing to know all the different options that we have and may
add in the future.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are cases where you can end up with bad data csums because of
misbehaving applications. This happens when an application modifies a
buffer in-flight when doing an O_DIRECT write. In order to recover the
file we need a way to turn off data checksums so you can copy the file
off, and then you can delete the file and restore it properly later.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In the face of extent root corruption, or any other core fs wide root
corruption we will fail to mount the file system. This makes recovery
kind of a pain, because you need to fall back to userspace tools to
scrape off data. Instead provide a mechanism to gracefully handle bad
roots, so we can at least mount read-only and possibly recover data from
the file system.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The standalone option usebackuproot was intended as one-time use and it
was not necessary to keep it in the option list. Now that we're going to
have more rescue options, it's desirable to keep them intact as it could
be confusing why the option disappears.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ remove the btrfs_clear_opt part from open_ctree ]
Signed-off-by: David Sterba <dsterba@suse.com>
We're going to have a lot of rescue options, add a helper to collapse
the /proc/mounts output to rescue=option1:option2:option3 format.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We're going to be adding a variety of different rescue options, we
should advertise which ones we support to make user spaces life easier
in the future.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When we move to being able to handle NULL csum_roots it'll be cleaner to
just check in btrfs_lookup_bio_sums instead of at all of the caller
locations, so push the NODATASUM check into it as well so it's unified.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We're going to be adding more options that require RDONLY, so add a
helper to do the check and error out if we don't have RDONLY set.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When scrubbing a stripe of a block group we always start readahead for the
checksums btree and wait for it to complete, however when the blockgroup is
not a data block group (or a mixed block group) it is a waste of time to do
it, since there are no checksums for metadata extents in that btree.
So skip that when the block group does not have the data flag set, saving
some time doing memory allocations, queueing a job in the readahead work
queue, waiting for it to complete and potentially avoiding some IO as well
(when csum tree extents are not in memory already).
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When we drop the last reference of a zone, we end up releasing it through
the callback reada_zone_release(), which deletes the zone from a device's
reada_zones radix tree. This tree is protected by the global readahead
lock at fs_info->reada_lock. Currently all places that are sure that they
are dropping the last reference on a zone, are calling kref_put() in a
critical section delimited by this lock, while all other places that are
sure they are not dropping the last reference, do not bother calling
kref_put() while holding that lock.
When working on the previous fix for hangs and use-after-frees in the
readahead code, my initial attempts were different and I actually ended
up having reada_zone_release() called when not holding the lock, which
resulted in weird and unexpected problems. So just add an assertion
there to detect such problem more quickly and make the dependency more
obvious.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Set the extent bits EXTENT_NORESERVE inside btrfs_dirty_pages() as
opposed to calling set_extent_bits again later.
Fold check for written length within the function.
Note: EXTENT_NORESERVE is set before unlocking extents.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
round_down looks prettier than the bit mask operations.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While using compression, a submitted bio is mapped with a compressed bio
which performs the read from disk, decompresses and returns uncompressed
data to original bio. The original bio must reflect the uncompressed
size (iosize) of the I/O to be performed, or else the page just gets the
decompressed I/O length of data (disk_io_size). The compressed bio
checks the extent map and gets the correct length while performing the
I/O from disk.
This came up in subpage work when only compressed length of the original
bio was filled in the page. This worked correctly for pagesize ==
sectorsize because both compressed and uncompressed data are at pagesize
boundaries, and would end up filling the requested page.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
write_bytes can change in btrfs_check_nocow_lock(). Calculate variables
such as num_pages and reserve_bytes once we are sure of the value of
write_bytes so there is no need to re-calculate.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If transaction_kthread is woken up before btrfs_fs_info::commit_interval
seconds have elapsed it will sleep for a fixed period of 5 seconds. This
is not a problem per-se but is not accurate. Instead the code should
sleep for an interval which guarantees on next wakeup commit_interval
would have passed. Since time tracking is not precise subtract 1 second
from delta to ensure the delay we end up waiting will be longer than
than the wake up period.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Rename 'now' to 'delta' and store there the delta between transaction
start time and current time. This is in preparation for optimising the
sleep logic in the next patch. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The value obtained from ktime_get_seconds() is guaranteed to be
monotonically increasing since it's taken from CLOCK_MONOTONIC. As
transaction_kthread obtains a reference to the currently running
transaction under holding btrfs_fs_info::trans_lock it's guaranteed to:
a) see an initialized 'cur', whose start_time is guaranteed to be smaller
than 'now'
or
b) not obtain a 'cur' and simply go to sleep.
Given this remove the unnecessary check, if it sees
now < cur->start_time this would imply there are far greater problems on
the machine.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The kernel provides easy to understand helpers to convert from human
understandable units to the kernel-friendly 'jiffies'. So let's use
those to make the code easier to understand. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Matching with the information that's available from the ioctl
FS_INFO, add generation to the per-filesystem directory
/sys/fs/btrfs/UUID/generation, which could be used by scripts.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=kcxn
-----END PGP SIGNATURE-----
Merge tag 'for-5.10-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few fixes for various warnings that accumulated over past two weeks:
- tree-checker: add missing return values for some errors
- lockdep fixes
- when reading qgroup config and starting quota rescan
- reverse order of quota ioctl lock and VFS freeze lock
- avoid accessing potentially stale fs info during device scan,
reported by syzbot
- add scope NOFS protection around qgroup relation changes
- check for running transaction before flushing qgroups
- fix tracking of new delalloc ranges for some cases"
* tag 'for-5.10-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix lockdep splat when enabling and disabling qgroups
btrfs: do nofs allocations when adding and removing qgroup relations
btrfs: fix lockdep splat when reading qgroup config on mount
btrfs: tree-checker: add missing returns after data_ref alignment checks
btrfs: don't access possibly stale fs_info data for printing duplicate device
btrfs: tree-checker: add missing return after error in root_item
btrfs: qgroup: don't commit transaction when we already hold the handle
btrfs: fix missing delalloc new bit for new delalloc ranges
When adding or removing a qgroup relation we are doing a GFP_KERNEL
allocation which is not safe because we are holding a transaction
handle open and that can make us deadlock if the allocator needs to
recurse into the filesystem. So just surround those calls with a
nofs context.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are sectorsize alignment checks that are reported but then
check_extent_data_ref continues. This was not intended, wrong alignment
is not a minor problem and we should return with error.
CC: stable@vger.kernel.org # 5.4+
Fixes: 0785a9aacf ("btrfs: tree-checker: Add EXTENT_DATA_REF check")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Syzbot reported a possible use-after-free when printing a duplicate device
warning device_list_add().
At this point it can happen that a btrfs_device::fs_info is not correctly
setup yet, so we're accessing stale data, when printing the warning
message using the btrfs_printk() wrappers.
==================================================================
BUG: KASAN: use-after-free in btrfs_printk+0x3eb/0x435 fs/btrfs/super.c:245
Read of size 8 at addr ffff8880878e06a8 by task syz-executor225/7068
CPU: 1 PID: 7068 Comm: syz-executor225 Not tainted 5.9.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1d6/0x29e lib/dump_stack.c:118
print_address_description+0x66/0x620 mm/kasan/report.c:383
__kasan_report mm/kasan/report.c:513 [inline]
kasan_report+0x132/0x1d0 mm/kasan/report.c:530
btrfs_printk+0x3eb/0x435 fs/btrfs/super.c:245
device_list_add+0x1a88/0x1d60 fs/btrfs/volumes.c:943
btrfs_scan_one_device+0x196/0x490 fs/btrfs/volumes.c:1359
btrfs_mount_root+0x48f/0xb60 fs/btrfs/super.c:1634
legacy_get_tree+0xea/0x180 fs/fs_context.c:592
vfs_get_tree+0x88/0x270 fs/super.c:1547
fc_mount fs/namespace.c:978 [inline]
vfs_kern_mount+0xc9/0x160 fs/namespace.c:1008
btrfs_mount+0x33c/0xae0 fs/btrfs/super.c:1732
legacy_get_tree+0xea/0x180 fs/fs_context.c:592
vfs_get_tree+0x88/0x270 fs/super.c:1547
do_new_mount fs/namespace.c:2875 [inline]
path_mount+0x179d/0x29e0 fs/namespace.c:3192
do_mount fs/namespace.c:3205 [inline]
__do_sys_mount fs/namespace.c:3413 [inline]
__se_sys_mount+0x126/0x180 fs/namespace.c:3390
do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x44840a
RSP: 002b:00007ffedfffd608 EFLAGS: 00000293 ORIG_RAX: 00000000000000a5
RAX: ffffffffffffffda RBX: 00007ffedfffd670 RCX: 000000000044840a
RDX: 0000000020000000 RSI: 0000000020000100 RDI: 00007ffedfffd630
RBP: 00007ffedfffd630 R08: 00007ffedfffd670 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000293 R12: 000000000000001a
R13: 0000000000000004 R14: 0000000000000003 R15: 0000000000000003
Allocated by task 6945:
kasan_save_stack mm/kasan/common.c:48 [inline]
kasan_set_track mm/kasan/common.c:56 [inline]
__kasan_kmalloc+0x100/0x130 mm/kasan/common.c:461
kmalloc_node include/linux/slab.h:577 [inline]
kvmalloc_node+0x81/0x110 mm/util.c:574
kvmalloc include/linux/mm.h:757 [inline]
kvzalloc include/linux/mm.h:765 [inline]
btrfs_mount_root+0xd0/0xb60 fs/btrfs/super.c:1613
legacy_get_tree+0xea/0x180 fs/fs_context.c:592
vfs_get_tree+0x88/0x270 fs/super.c:1547
fc_mount fs/namespace.c:978 [inline]
vfs_kern_mount+0xc9/0x160 fs/namespace.c:1008
btrfs_mount+0x33c/0xae0 fs/btrfs/super.c:1732
legacy_get_tree+0xea/0x180 fs/fs_context.c:592
vfs_get_tree+0x88/0x270 fs/super.c:1547
do_new_mount fs/namespace.c:2875 [inline]
path_mount+0x179d/0x29e0 fs/namespace.c:3192
do_mount fs/namespace.c:3205 [inline]
__do_sys_mount fs/namespace.c:3413 [inline]
__se_sys_mount+0x126/0x180 fs/namespace.c:3390
do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Freed by task 6945:
kasan_save_stack mm/kasan/common.c:48 [inline]
kasan_set_track+0x3d/0x70 mm/kasan/common.c:56
kasan_set_free_info+0x17/0x30 mm/kasan/generic.c:355
__kasan_slab_free+0xdd/0x110 mm/kasan/common.c:422
__cache_free mm/slab.c:3418 [inline]
kfree+0x113/0x200 mm/slab.c:3756
deactivate_locked_super+0xa7/0xf0 fs/super.c:335
btrfs_mount_root+0x72b/0xb60 fs/btrfs/super.c:1678
legacy_get_tree+0xea/0x180 fs/fs_context.c:592
vfs_get_tree+0x88/0x270 fs/super.c:1547
fc_mount fs/namespace.c:978 [inline]
vfs_kern_mount+0xc9/0x160 fs/namespace.c:1008
btrfs_mount+0x33c/0xae0 fs/btrfs/super.c:1732
legacy_get_tree+0xea/0x180 fs/fs_context.c:592
vfs_get_tree+0x88/0x270 fs/super.c:1547
do_new_mount fs/namespace.c:2875 [inline]
path_mount+0x179d/0x29e0 fs/namespace.c:3192
do_mount fs/namespace.c:3205 [inline]
__do_sys_mount fs/namespace.c:3413 [inline]
__se_sys_mount+0x126/0x180 fs/namespace.c:3390
do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The buggy address belongs to the object at ffff8880878e0000
which belongs to the cache kmalloc-16k of size 16384
The buggy address is located 1704 bytes inside of
16384-byte region [ffff8880878e0000, ffff8880878e4000)
The buggy address belongs to the page:
page:0000000060704f30 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x878e0
head:0000000060704f30 order:3 compound_mapcount:0 compound_pincount:0
flags: 0xfffe0000010200(slab|head)
raw: 00fffe0000010200 ffffea00028e9a08 ffffea00021e3608 ffff8880aa440b00
raw: 0000000000000000 ffff8880878e0000 0000000100000001 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8880878e0580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8880878e0600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8880878e0680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8880878e0700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8880878e0780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
The syzkaller reproducer for this use-after-free crafts a filesystem image
and loop mounts it twice in a loop. The mount will fail as the crafted
image has an invalid chunk tree. When this happens btrfs_mount_root() will
call deactivate_locked_super(), which then cleans up fs_info and
fs_info::sb. If a second thread now adds the same block-device to the
filesystem, it will get detected as a duplicate device and
device_list_add() will reject the duplicate and print a warning. But as
the fs_info pointer passed in is non-NULL this will result in a
use-after-free.
Instead of printing possibly uninitialized or already freed memory in
btrfs_printk(), explicitly pass in a NULL fs_info so the printing of the
device name will be skipped altogether.
There was a slightly different approach discussed in
https://lore.kernel.org/linux-btrfs/20200114060920.4527-1-anand.jain@oracle.com/t/#u
Link: https://lore.kernel.org/linux-btrfs/000000000000c9e14b05afcc41ba@google.com
Reported-by: syzbot+582e66e5edf36a22c7b0@syzkaller.appspotmail.com
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's a missing return statement after an error is found in the
root_item, this can cause further problems when a crafted image triggers
the error.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=210181
Fixes: 259ee7754b ("btrfs: tree-checker: Add ROOT_ITEM check")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
When running the following script, btrfs will trigger an ASSERT():
#/bin/bash
mkfs.btrfs -f $dev
mount $dev $mnt
xfs_io -f -c "pwrite 0 1G" $mnt/file
sync
btrfs quota enable $mnt
btrfs quota rescan -w $mnt
# Manually set the limit below current usage
btrfs qgroup limit 512M $mnt $mnt
# Crash happens
touch $mnt/file
The dmesg looks like this:
assertion failed: refcount_read(&trans->use_count) == 1, in fs/btrfs/transaction.c:2022
------------[ cut here ]------------
kernel BUG at fs/btrfs/ctree.h:3230!
invalid opcode: 0000 [#1] SMP PTI
RIP: 0010:assertfail.constprop.0+0x18/0x1a [btrfs]
btrfs_commit_transaction.cold+0x11/0x5d [btrfs]
try_flush_qgroup+0x67/0x100 [btrfs]
__btrfs_qgroup_reserve_meta+0x3a/0x60 [btrfs]
btrfs_delayed_update_inode+0xaa/0x350 [btrfs]
btrfs_update_inode+0x9d/0x110 [btrfs]
btrfs_dirty_inode+0x5d/0xd0 [btrfs]
touch_atime+0xb5/0x100
iterate_dir+0xf1/0x1b0
__x64_sys_getdents64+0x78/0x110
do_syscall_64+0x33/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fb5afe588db
[CAUSE]
In try_flush_qgroup(), we assume we don't hold a transaction handle at
all. This is true for data reservation and mostly true for metadata.
Since data space reservation always happens before we start a
transaction, and for most metadata operation we reserve space in
start_transaction().
But there is an exception, btrfs_delayed_inode_reserve_metadata().
It holds a transaction handle, while still trying to reserve extra
metadata space.
When we hit EDQUOT inside btrfs_delayed_inode_reserve_metadata(), we
will join current transaction and commit, while we still have
transaction handle from qgroup code.
[FIX]
Let's check current->journal before we join the transaction.
If current->journal is unset or BTRFS_SEND_TRANS_STUB, it means
we are not holding a transaction, thus are able to join and then commit
transaction.
If current->journal is a valid transaction handle, we avoid committing
transaction and just end it
This is less effective than committing current transaction, as it won't
free metadata reserved space, but we may still free some data space
before new data writes.
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1178634
Fixes: c53e965360 ("btrfs: qgroup: try to flush qgroup space when we get -EDQUOT")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When doing a buffered write, through one of the write family syscalls, we
look for ranges which currently don't have allocated extents and set the
'delalloc new' bit on them, so that we can report a correct number of used
blocks to the stat(2) syscall until delalloc is flushed and ordered extents
complete.
However there are a few other places where we can do a buffered write
against a range that is mapped to a hole (no extent allocated) and where
we do not set the 'new delalloc' bit. Those places are:
- Doing a memory mapped write against a hole;
- Cloning an inline extent into a hole starting at file offset 0;
- Calling btrfs_cont_expand() when the i_size of the file is not aligned
to the sector size and is located in a hole. For example when cloning
to a destination offset beyond EOF.
So after such cases, until the corresponding delalloc range is flushed and
the respective ordered extents complete, we can report an incorrect number
of blocks used through the stat(2) syscall.
In some cases we can end up reporting 0 used blocks to stat(2), which is a
particular bad value to report as it may mislead tools to think a file is
completely sparse when its i_size is not zero, making them skip reading
any data, an undesired consequence for tools such as archivers and other
backup tools, as reported a long time ago in the following thread (and
other past threads):
https://lists.gnu.org/archive/html/bug-tar/2016-07/msg00001.html
Example reproducer:
$ cat reproducer.sh
#!/bin/bash
MNT=/mnt/sdi
DEV=/dev/sdi
mkfs.btrfs -f $DEV > /dev/null
# mkfs.xfs -f $DEV > /dev/null
# mkfs.ext4 -F $DEV > /dev/null
# mkfs.f2fs -f $DEV > /dev/null
mount $DEV $MNT
xfs_io -f -c "truncate 64K" \
-c "mmap -w 0 64K" \
-c "mwrite -S 0xab 0 64K" \
-c "munmap" \
$MNT/foo
blocks_used=$(stat -c %b $MNT/foo)
echo "blocks used: $blocks_used"
if [ $blocks_used -eq 0 ]; then
echo "ERROR: blocks used is 0"
fi
umount $DEV
$ ./reproducer.sh
blocks used: 0
ERROR: blocks used is 0
So move the logic that decides to set the 'delalloc bit' bit into the
function btrfs_set_extent_delalloc(), since that is what we use for all
those missing cases as well as for the cases that currently work well.
This change is also preparatory work for an upcoming patch that fixes
other problems related to tracking and reporting the number of bytes used
by an inode.
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=3FTR
-----END PGP SIGNATURE-----
Merge tag 'for-5.10-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A handful of minor fixes and updates:
- handle missing device replace item on mount (syzbot report)
- fix space reservation calculation when finishing relocation
- fix memory leak on error path in ref-verify (debugging feature)
- fix potential overflow during defrag on 32bit arches
- minor code update to silence smatch warning
- minor error message updates"
* tag 'for-5.10-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: ref-verify: fix memory leak in btrfs_ref_tree_mod
btrfs: dev-replace: fail mount if we don't have replace item with target device
btrfs: scrub: update message regarding read-only status
btrfs: clean up NULL checks in qgroup_unreserve_range()
btrfs: fix min reserved size calculation in merge_reloc_root
btrfs: print the block rsv type when we fail our reservation
btrfs: fix potential overflow in cluster_pages_for_defrag on 32bit arch
There is one error handling path that does not free ref, which may cause
a minor memory leak.
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If there is a device BTRFS_DEV_REPLACE_DEVID without the device replace
item, then it means the filesystem is inconsistent state. This is either
corruption or a crafted image. Fail the mount as this needs a closer
look what is actually wrong.
As of now if BTRFS_DEV_REPLACE_DEVID is present without the replace
item, in __btrfs_free_extra_devids() we determine that there is an
extra device, and free those extra devices but continue to mount the
device.
However, we were wrong in keeping tack of the rw_devices so the syzbot
testcase failed:
WARNING: CPU: 1 PID: 3612 at fs/btrfs/volumes.c:1166 close_fs_devices.part.0+0x607/0x800 fs/btrfs/volumes.c:1166
Kernel panic - not syncing: panic_on_warn set ...
CPU: 1 PID: 3612 Comm: syz-executor.2 Not tainted 5.9.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x198/0x1fd lib/dump_stack.c:118
panic+0x347/0x7c0 kernel/panic.c:231
__warn.cold+0x20/0x46 kernel/panic.c:600
report_bug+0x1bd/0x210 lib/bug.c:198
handle_bug+0x38/0x90 arch/x86/kernel/traps.c:234
exc_invalid_op+0x14/0x40 arch/x86/kernel/traps.c:254
asm_exc_invalid_op+0x12/0x20 arch/x86/include/asm/idtentry.h:536
RIP: 0010:close_fs_devices.part.0+0x607/0x800 fs/btrfs/volumes.c:1166
RSP: 0018:ffffc900091777e0 EFLAGS: 00010246
RAX: 0000000000040000 RBX: ffffffffffffffff RCX: ffffc9000c8b7000
RDX: 0000000000040000 RSI: ffffffff83097f47 RDI: 0000000000000007
RBP: dffffc0000000000 R08: 0000000000000001 R09: ffff8880988a187f
R10: 0000000000000000 R11: 0000000000000001 R12: ffff88809593a130
R13: ffff88809593a1ec R14: ffff8880988a1908 R15: ffff88809593a050
close_fs_devices fs/btrfs/volumes.c:1193 [inline]
btrfs_close_devices+0x95/0x1f0 fs/btrfs/volumes.c:1179
open_ctree+0x4984/0x4a2d fs/btrfs/disk-io.c:3434
btrfs_fill_super fs/btrfs/super.c:1316 [inline]
btrfs_mount_root.cold+0x14/0x165 fs/btrfs/super.c:1672
The fix here is, when we determine that there isn't a replace item
then fail the mount if there is a replace target device (devid 0).
CC: stable@vger.kernel.org # 4.19+
Reported-by: syzbot+4cfe71a4da060be47502@syzkaller.appspotmail.com
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Based on user feedback update the message printed when scrub fails to
start due to write requirements. To make a distinction add a device id
to the messages.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Smatch complains that this code dereferences "entry" before checking
whether it's NULL on the next line. Fortunately, rb_entry() will never
return NULL so it doesn't cause a problem. We can clean up the NULL
checking a bit to silence the warning and make the code more clear.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
To help with debugging, print the type of the block rsv when we fail to
use our target block rsv in btrfs_use_block_rsv.
This now produces:
[ 544.672035] BTRFS: block rsv 1 returned -28
which is still cryptic without consulting the enum in block-rsv.h but I
guess it's better than nothing.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add note from Nikolay ]
Signed-off-by: David Sterba <dsterba@suse.com>
On 32-bit systems, this shift will overflow for files larger than 4GB as
start_index is unsigned long while the calls to btrfs_delalloc_*_space
expect u64.
CC: stable@vger.kernel.org # 4.4+
Fixes: df480633b8 ("btrfs: extent-tree: Switch to new delalloc space reserve and release")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Sterba <dsterba@suse.com>
[ define the variable instead of repeating the shift ]
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=bR/o
-----END PGP SIGNATURE-----
Merge tag 'for-5.10-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- lockdep fixes:
- drop path locks before manipulating sysfs objects or qgroups
- preliminary fixes before tree locks get switched to rwsem
- use annotated seqlock
- build warning fixes (printk format)
- fix relocation vs fallocate race
- tree checker properly validates number of stripes and parity
- readahead vs device replace fixes
- iomap dio fix for unnecessary buffered io fallback
* tag 'for-5.10-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: convert data_seqcount to seqcount_mutex_t
btrfs: don't fallback to buffered read if we don't need to
btrfs: add a helper to read the tree_root commit root for backref lookup
btrfs: drop the path before adding qgroup items when enabling qgroups
btrfs: fix readahead hang and use-after-free after removing a device
btrfs: fix use-after-free on readahead extent after failure to create it
btrfs: tree-checker: validate number of chunk stripes and parity
btrfs: tree-checker: fix incorrect printk format
btrfs: drop the path before adding block group sysfs files
btrfs: fix relocation failure due to race with fallocate
By doing so we can associate the sequence counter to the chunk_mutex
for lockdep purposes (compiled-out otherwise), the mutex is otherwise
used on the write side.
Also avoid explicitly disabling preemption around the write region as it
will now be done automatically by the seqcount machinery based on the
lock type.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since we switched to the iomap infrastructure in b5ff9f1a96e8f ("btrfs:
switch to iomap for direct IO") we're calling generic_file_buffered_read()
directly and not via generic_file_read_iter() anymore.
If the read could read everything there is no need to bother calling
generic_file_buffered_read(), like it is handled in
generic_file_read_iter().
If we call generic_file_buffered_read() in this case we can hit a
situation where we do an invalid readahead and cause this UBSAN splat
in fstest generic/091:
run fstests generic/091 at 2020-10-21 10:52:32
================================================================================
UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13
shift exponent 64 is too large for 64-bit type 'long unsigned int'
CPU: 0 PID: 656 Comm: fsx Not tainted 5.9.0-rc7+ #821
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4-rebuilt.opensuse.org 04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:77
dump_stack+0x57/0x70 lib/dump_stack.c:118
ubsan_epilogue+0x5/0x40 lib/ubsan.c:148
__ubsan_handle_shift_out_of_bounds.cold+0x61/0xe9 lib/ubsan.c:395
__roundup_pow_of_two ./include/linux/log2.h:57
get_init_ra_size mm/readahead.c:318
ondemand_readahead.cold+0x16/0x2c mm/readahead.c:530
generic_file_buffered_read+0x3ac/0x840 mm/filemap.c:2199
call_read_iter ./include/linux/fs.h:1876
new_sync_read+0x102/0x180 fs/read_write.c:415
vfs_read+0x11c/0x1a0 fs/read_write.c:481
ksys_read+0x4f/0xc0 fs/read_write.c:615
do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9 arch/x86/entry/entry_64.S:118
RIP: 0033:0x7fe87fee992e
RSP: 002b:00007ffe01605278 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 000000000004f000 RCX: 00007fe87fee992e
RDX: 0000000000004000 RSI: 0000000001677000 RDI: 0000000000000003
RBP: 000000000004f000 R08: 0000000000004000 R09: 000000000004f000
R10: 0000000000053000 R11: 0000000000000246 R12: 0000000000004000
R13: 0000000000000000 R14: 000000000007a120 R15: 0000000000000000
================================================================================
BTRFS info (device nullb0): has skinny extents
BTRFS info (device nullb0): ZONED mode enabled, zone size 268435456 B
BTRFS info (device nullb0): enabling ssd optimizations
Fixes: f85781fb50 ("btrfs: switch to iomap for direct IO")
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
I got the following lockdep splat with tree locks converted to rwsem
patches on btrfs/104:
======================================================
WARNING: possible circular locking dependency detected
5.9.0+ #102 Not tainted
------------------------------------------------------
btrfs-cleaner/903 is trying to acquire lock:
ffff8e7fab6ffe30 (btrfs-root-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x32/0x170
but task is already holding lock:
ffff8e7fab628a88 (&fs_info->commit_root_sem){++++}-{3:3}, at: btrfs_find_all_roots+0x41/0x80
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (&fs_info->commit_root_sem){++++}-{3:3}:
down_read+0x40/0x130
caching_thread+0x53/0x5a0
btrfs_work_helper+0xfa/0x520
process_one_work+0x238/0x540
worker_thread+0x55/0x3c0
kthread+0x13a/0x150
ret_from_fork+0x1f/0x30
-> #2 (&caching_ctl->mutex){+.+.}-{3:3}:
__mutex_lock+0x7e/0x7b0
btrfs_cache_block_group+0x1e0/0x510
find_free_extent+0xb6e/0x12f0
btrfs_reserve_extent+0xb3/0x1b0
btrfs_alloc_tree_block+0xb1/0x330
alloc_tree_block_no_bg_flush+0x4f/0x60
__btrfs_cow_block+0x11d/0x580
btrfs_cow_block+0x10c/0x220
commit_cowonly_roots+0x47/0x2e0
btrfs_commit_transaction+0x595/0xbd0
sync_filesystem+0x74/0x90
generic_shutdown_super+0x22/0x100
kill_anon_super+0x14/0x30
btrfs_kill_super+0x12/0x20
deactivate_locked_super+0x36/0xa0
cleanup_mnt+0x12d/0x190
task_work_run+0x5c/0xa0
exit_to_user_mode_prepare+0x1df/0x200
syscall_exit_to_user_mode+0x54/0x280
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #1 (&space_info->groups_sem){++++}-{3:3}:
down_read+0x40/0x130
find_free_extent+0x2ed/0x12f0
btrfs_reserve_extent+0xb3/0x1b0
btrfs_alloc_tree_block+0xb1/0x330
alloc_tree_block_no_bg_flush+0x4f/0x60
__btrfs_cow_block+0x11d/0x580
btrfs_cow_block+0x10c/0x220
commit_cowonly_roots+0x47/0x2e0
btrfs_commit_transaction+0x595/0xbd0
sync_filesystem+0x74/0x90
generic_shutdown_super+0x22/0x100
kill_anon_super+0x14/0x30
btrfs_kill_super+0x12/0x20
deactivate_locked_super+0x36/0xa0
cleanup_mnt+0x12d/0x190
task_work_run+0x5c/0xa0
exit_to_user_mode_prepare+0x1df/0x200
syscall_exit_to_user_mode+0x54/0x280
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #0 (btrfs-root-00){++++}-{3:3}:
__lock_acquire+0x1167/0x2150
lock_acquire+0xb9/0x3d0
down_read_nested+0x43/0x130
__btrfs_tree_read_lock+0x32/0x170
__btrfs_read_lock_root_node+0x3a/0x50
btrfs_search_slot+0x614/0x9d0
btrfs_find_root+0x35/0x1b0
btrfs_read_tree_root+0x61/0x120
btrfs_get_root_ref+0x14b/0x600
find_parent_nodes+0x3e6/0x1b30
btrfs_find_all_roots_safe+0xb4/0x130
btrfs_find_all_roots+0x60/0x80
btrfs_qgroup_trace_extent_post+0x27/0x40
btrfs_add_delayed_data_ref+0x3fd/0x460
btrfs_free_extent+0x42/0x100
__btrfs_mod_ref+0x1d7/0x2f0
walk_up_proc+0x11c/0x400
walk_up_tree+0xf0/0x180
btrfs_drop_snapshot+0x1c7/0x780
btrfs_clean_one_deleted_snapshot+0xfb/0x110
cleaner_kthread+0xd4/0x140
kthread+0x13a/0x150
ret_from_fork+0x1f/0x30
other info that might help us debug this:
Chain exists of:
btrfs-root-00 --> &caching_ctl->mutex --> &fs_info->commit_root_sem
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&fs_info->commit_root_sem);
lock(&caching_ctl->mutex);
lock(&fs_info->commit_root_sem);
lock(btrfs-root-00);
*** DEADLOCK ***
3 locks held by btrfs-cleaner/903:
#0: ffff8e7fab628838 (&fs_info->cleaner_mutex){+.+.}-{3:3}, at: cleaner_kthread+0x6e/0x140
#1: ffff8e7faadac640 (sb_internal){.+.+}-{0:0}, at: start_transaction+0x40b/0x5c0
#2: ffff8e7fab628a88 (&fs_info->commit_root_sem){++++}-{3:3}, at: btrfs_find_all_roots+0x41/0x80
stack backtrace:
CPU: 0 PID: 903 Comm: btrfs-cleaner Not tainted 5.9.0+ #102
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014
Call Trace:
dump_stack+0x8b/0xb0
check_noncircular+0xcf/0xf0
__lock_acquire+0x1167/0x2150
? __bfs+0x42/0x210
lock_acquire+0xb9/0x3d0
? __btrfs_tree_read_lock+0x32/0x170
down_read_nested+0x43/0x130
? __btrfs_tree_read_lock+0x32/0x170
__btrfs_tree_read_lock+0x32/0x170
__btrfs_read_lock_root_node+0x3a/0x50
btrfs_search_slot+0x614/0x9d0
? find_held_lock+0x2b/0x80
btrfs_find_root+0x35/0x1b0
? do_raw_spin_unlock+0x4b/0xa0
btrfs_read_tree_root+0x61/0x120
btrfs_get_root_ref+0x14b/0x600
find_parent_nodes+0x3e6/0x1b30
btrfs_find_all_roots_safe+0xb4/0x130
btrfs_find_all_roots+0x60/0x80
btrfs_qgroup_trace_extent_post+0x27/0x40
btrfs_add_delayed_data_ref+0x3fd/0x460
btrfs_free_extent+0x42/0x100
__btrfs_mod_ref+0x1d7/0x2f0
walk_up_proc+0x11c/0x400
walk_up_tree+0xf0/0x180
btrfs_drop_snapshot+0x1c7/0x780
? btrfs_clean_one_deleted_snapshot+0x73/0x110
btrfs_clean_one_deleted_snapshot+0xfb/0x110
cleaner_kthread+0xd4/0x140
? btrfs_alloc_root+0x50/0x50
kthread+0x13a/0x150
? kthread_create_worker_on_cpu+0x40/0x40
ret_from_fork+0x1f/0x30
BTRFS info (device sdb): disk space caching is enabled
BTRFS info (device sdb): has skinny extents
This happens because qgroups does a backref lookup when we create a
delayed ref. From here it may have to look up a root from an indirect
ref, which does a normal lookup on the tree_root, which takes the read
lock on the tree_root nodes.
To fix this we need to add a variant for looking up roots that searches
the commit root of the tree_root. Then when we do the backref search
using the commit root we are sure to not take any locks on the tree_root
nodes. This gets rid of the lockdep splat when running btrfs/104.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When enabling qgroups we walk the tree_root and then add a qgroup item
for every root that we have. This creates a lock dependency on the
tree_root and qgroup_root, which results in the following lockdep splat
(with tree locks using rwsem), eg. in tests btrfs/017 or btrfs/022:
======================================================
WARNING: possible circular locking dependency detected
5.9.0-default+ #1299 Not tainted
------------------------------------------------------
btrfs/24552 is trying to acquire lock:
ffff9142dfc5f630 (btrfs-quota-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x35/0x1c0 [btrfs]
but task is already holding lock:
ffff9142dfc5d0b0 (btrfs-root-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x35/0x1c0 [btrfs]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (btrfs-root-00){++++}-{3:3}:
__lock_acquire+0x3fb/0x730
lock_acquire.part.0+0x6a/0x130
down_read_nested+0x46/0x130
__btrfs_tree_read_lock+0x35/0x1c0 [btrfs]
__btrfs_read_lock_root_node+0x3a/0x50 [btrfs]
btrfs_search_slot_get_root+0x11d/0x290 [btrfs]
btrfs_search_slot+0xc3/0x9f0 [btrfs]
btrfs_insert_item+0x6e/0x140 [btrfs]
btrfs_create_tree+0x1cb/0x240 [btrfs]
btrfs_quota_enable+0xcd/0x790 [btrfs]
btrfs_ioctl_quota_ctl+0xc9/0xe0 [btrfs]
__x64_sys_ioctl+0x83/0xa0
do_syscall_64+0x2d/0x70
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #0 (btrfs-quota-00){++++}-{3:3}:
check_prev_add+0x91/0xc30
validate_chain+0x491/0x750
__lock_acquire+0x3fb/0x730
lock_acquire.part.0+0x6a/0x130
down_read_nested+0x46/0x130
__btrfs_tree_read_lock+0x35/0x1c0 [btrfs]
__btrfs_read_lock_root_node+0x3a/0x50 [btrfs]
btrfs_search_slot_get_root+0x11d/0x290 [btrfs]
btrfs_search_slot+0xc3/0x9f0 [btrfs]
btrfs_insert_empty_items+0x58/0xa0 [btrfs]
add_qgroup_item.part.0+0x72/0x210 [btrfs]
btrfs_quota_enable+0x3bb/0x790 [btrfs]
btrfs_ioctl_quota_ctl+0xc9/0xe0 [btrfs]
__x64_sys_ioctl+0x83/0xa0
do_syscall_64+0x2d/0x70
entry_SYSCALL_64_after_hwframe+0x44/0xa9
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(btrfs-root-00);
lock(btrfs-quota-00);
lock(btrfs-root-00);
lock(btrfs-quota-00);
*** DEADLOCK ***
5 locks held by btrfs/24552:
#0: ffff9142df431478 (sb_writers#10){.+.+}-{0:0}, at: mnt_want_write_file+0x22/0xa0
#1: ffff9142f9b10cc0 (&fs_info->subvol_sem){++++}-{3:3}, at: btrfs_ioctl_quota_ctl+0x7b/0xe0 [btrfs]
#2: ffff9142f9b11a08 (&fs_info->qgroup_ioctl_lock){+.+.}-{3:3}, at: btrfs_quota_enable+0x3b/0x790 [btrfs]
#3: ffff9142df431698 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x406/0x510 [btrfs]
#4: ffff9142dfc5d0b0 (btrfs-root-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x35/0x1c0 [btrfs]
stack backtrace:
CPU: 1 PID: 24552 Comm: btrfs Not tainted 5.9.0-default+ #1299
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014
Call Trace:
dump_stack+0x77/0x97
check_noncircular+0xf3/0x110
check_prev_add+0x91/0xc30
validate_chain+0x491/0x750
__lock_acquire+0x3fb/0x730
lock_acquire.part.0+0x6a/0x130
? __btrfs_tree_read_lock+0x35/0x1c0 [btrfs]
? lock_acquire+0xc4/0x140
? __btrfs_tree_read_lock+0x35/0x1c0 [btrfs]
down_read_nested+0x46/0x130
? __btrfs_tree_read_lock+0x35/0x1c0 [btrfs]
__btrfs_tree_read_lock+0x35/0x1c0 [btrfs]
? btrfs_root_node+0xd9/0x200 [btrfs]
__btrfs_read_lock_root_node+0x3a/0x50 [btrfs]
btrfs_search_slot_get_root+0x11d/0x290 [btrfs]
btrfs_search_slot+0xc3/0x9f0 [btrfs]
btrfs_insert_empty_items+0x58/0xa0 [btrfs]
add_qgroup_item.part.0+0x72/0x210 [btrfs]
btrfs_quota_enable+0x3bb/0x790 [btrfs]
btrfs_ioctl_quota_ctl+0xc9/0xe0 [btrfs]
__x64_sys_ioctl+0x83/0xa0
do_syscall_64+0x2d/0x70
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fix this by dropping the path whenever we find a root item, add the
qgroup item, and then re-lookup the root item we found and continue
processing roots.
Reported-by: David Sterba <dsterba@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Very sporadically I had test case btrfs/069 from fstests hanging (for
years, it is not a recent regression), with the following traces in
dmesg/syslog:
[162301.160628] BTRFS info (device sdc): dev_replace from /dev/sdd (devid 2) to /dev/sdg started
[162301.181196] BTRFS info (device sdc): scrub: finished on devid 4 with status: 0
[162301.287162] BTRFS info (device sdc): dev_replace from /dev/sdd (devid 2) to /dev/sdg finished
[162513.513792] INFO: task btrfs-transacti:1356167 blocked for more than 120 seconds.
[162513.514318] Not tainted 5.9.0-rc6-btrfs-next-69 #1
[162513.514522] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[162513.514747] task:btrfs-transacti state:D stack: 0 pid:1356167 ppid: 2 flags:0x00004000
[162513.514751] Call Trace:
[162513.514761] __schedule+0x5ce/0xd00
[162513.514765] ? _raw_spin_unlock_irqrestore+0x3c/0x60
[162513.514771] schedule+0x46/0xf0
[162513.514844] wait_current_trans+0xde/0x140 [btrfs]
[162513.514850] ? finish_wait+0x90/0x90
[162513.514864] start_transaction+0x37c/0x5f0 [btrfs]
[162513.514879] transaction_kthread+0xa4/0x170 [btrfs]
[162513.514891] ? btrfs_cleanup_transaction+0x660/0x660 [btrfs]
[162513.514894] kthread+0x153/0x170
[162513.514897] ? kthread_stop+0x2c0/0x2c0
[162513.514902] ret_from_fork+0x22/0x30
[162513.514916] INFO: task fsstress:1356184 blocked for more than 120 seconds.
[162513.515192] Not tainted 5.9.0-rc6-btrfs-next-69 #1
[162513.515431] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[162513.515680] task:fsstress state:D stack: 0 pid:1356184 ppid:1356177 flags:0x00004000
[162513.515682] Call Trace:
[162513.515688] __schedule+0x5ce/0xd00
[162513.515691] ? _raw_spin_unlock_irqrestore+0x3c/0x60
[162513.515697] schedule+0x46/0xf0
[162513.515712] wait_current_trans+0xde/0x140 [btrfs]
[162513.515716] ? finish_wait+0x90/0x90
[162513.515729] start_transaction+0x37c/0x5f0 [btrfs]
[162513.515743] btrfs_attach_transaction_barrier+0x1f/0x50 [btrfs]
[162513.515753] btrfs_sync_fs+0x61/0x1c0 [btrfs]
[162513.515758] ? __ia32_sys_fdatasync+0x20/0x20
[162513.515761] iterate_supers+0x87/0xf0
[162513.515765] ksys_sync+0x60/0xb0
[162513.515768] __do_sys_sync+0xa/0x10
[162513.515771] do_syscall_64+0x33/0x80
[162513.515774] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[162513.515781] RIP: 0033:0x7f5238f50bd7
[162513.515782] Code: Bad RIP value.
[162513.515784] RSP: 002b:00007fff67b978e8 EFLAGS: 00000206 ORIG_RAX: 00000000000000a2
[162513.515786] RAX: ffffffffffffffda RBX: 000055b1fad2c560 RCX: 00007f5238f50bd7
[162513.515788] RDX: 00000000ffffffff RSI: 000000000daf0e74 RDI: 000000000000003a
[162513.515789] RBP: 0000000000000032 R08: 000000000000000a R09: 00007f5239019be0
[162513.515791] R10: fffffffffffff24f R11: 0000000000000206 R12: 000000000000003a
[162513.515792] R13: 00007fff67b97950 R14: 00007fff67b97906 R15: 000055b1fad1a340
[162513.515804] INFO: task fsstress:1356185 blocked for more than 120 seconds.
[162513.516064] Not tainted 5.9.0-rc6-btrfs-next-69 #1
[162513.516329] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[162513.516617] task:fsstress state:D stack: 0 pid:1356185 ppid:1356177 flags:0x00000000
[162513.516620] Call Trace:
[162513.516625] __schedule+0x5ce/0xd00
[162513.516628] ? _raw_spin_unlock_irqrestore+0x3c/0x60
[162513.516634] schedule+0x46/0xf0
[162513.516647] wait_current_trans+0xde/0x140 [btrfs]
[162513.516650] ? finish_wait+0x90/0x90
[162513.516662] start_transaction+0x4d7/0x5f0 [btrfs]
[162513.516679] btrfs_setxattr_trans+0x3c/0x100 [btrfs]
[162513.516686] __vfs_setxattr+0x66/0x80
[162513.516691] __vfs_setxattr_noperm+0x70/0x200
[162513.516697] vfs_setxattr+0x6b/0x120
[162513.516703] setxattr+0x125/0x240
[162513.516709] ? lock_acquire+0xb1/0x480
[162513.516712] ? mnt_want_write+0x20/0x50
[162513.516721] ? rcu_read_lock_any_held+0x8e/0xb0
[162513.516723] ? preempt_count_add+0x49/0xa0
[162513.516725] ? __sb_start_write+0x19b/0x290
[162513.516727] ? preempt_count_add+0x49/0xa0
[162513.516732] path_setxattr+0xba/0xd0
[162513.516739] __x64_sys_setxattr+0x27/0x30
[162513.516741] do_syscall_64+0x33/0x80
[162513.516743] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[162513.516745] RIP: 0033:0x7f5238f56d5a
[162513.516746] Code: Bad RIP value.
[162513.516748] RSP: 002b:00007fff67b97868 EFLAGS: 00000202 ORIG_RAX: 00000000000000bc
[162513.516750] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f5238f56d5a
[162513.516751] RDX: 000055b1fbb0d5a0 RSI: 00007fff67b978a0 RDI: 000055b1fbb0d470
[162513.516753] RBP: 000055b1fbb0d5a0 R08: 0000000000000001 R09: 00007fff67b97700
[162513.516754] R10: 0000000000000004 R11: 0000000000000202 R12: 0000000000000004
[162513.516756] R13: 0000000000000024 R14: 0000000000000001 R15: 00007fff67b978a0
[162513.516767] INFO: task fsstress:1356196 blocked for more than 120 seconds.
[162513.517064] Not tainted 5.9.0-rc6-btrfs-next-69 #1
[162513.517365] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[162513.517763] task:fsstress state:D stack: 0 pid:1356196 ppid:1356177 flags:0x00004000
[162513.517780] Call Trace:
[162513.517786] __schedule+0x5ce/0xd00
[162513.517789] ? _raw_spin_unlock_irqrestore+0x3c/0x60
[162513.517796] schedule+0x46/0xf0
[162513.517810] wait_current_trans+0xde/0x140 [btrfs]
[162513.517814] ? finish_wait+0x90/0x90
[162513.517829] start_transaction+0x37c/0x5f0 [btrfs]
[162513.517845] btrfs_attach_transaction_barrier+0x1f/0x50 [btrfs]
[162513.517857] btrfs_sync_fs+0x61/0x1c0 [btrfs]
[162513.517862] ? __ia32_sys_fdatasync+0x20/0x20
[162513.517865] iterate_supers+0x87/0xf0
[162513.517869] ksys_sync+0x60/0xb0
[162513.517872] __do_sys_sync+0xa/0x10
[162513.517875] do_syscall_64+0x33/0x80
[162513.517878] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[162513.517881] RIP: 0033:0x7f5238f50bd7
[162513.517883] Code: Bad RIP value.
[162513.517885] RSP: 002b:00007fff67b978e8 EFLAGS: 00000206 ORIG_RAX: 00000000000000a2
[162513.517887] RAX: ffffffffffffffda RBX: 000055b1fad2c560 RCX: 00007f5238f50bd7
[162513.517889] RDX: 0000000000000000 RSI: 000000007660add2 RDI: 0000000000000053
[162513.517891] RBP: 0000000000000032 R08: 0000000000000067 R09: 00007f5239019be0
[162513.517893] R10: fffffffffffff24f R11: 0000000000000206 R12: 0000000000000053
[162513.517895] R13: 00007fff67b97950 R14: 00007fff67b97906 R15: 000055b1fad1a340
[162513.517908] INFO: task fsstress:1356197 blocked for more than 120 seconds.
[162513.518298] Not tainted 5.9.0-rc6-btrfs-next-69 #1
[162513.518672] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[162513.519157] task:fsstress state:D stack: 0 pid:1356197 ppid:1356177 flags:0x00000000
[162513.519160] Call Trace:
[162513.519165] __schedule+0x5ce/0xd00
[162513.519168] ? _raw_spin_unlock_irqrestore+0x3c/0x60
[162513.519174] schedule+0x46/0xf0
[162513.519190] wait_current_trans+0xde/0x140 [btrfs]
[162513.519193] ? finish_wait+0x90/0x90
[162513.519206] start_transaction+0x4d7/0x5f0 [btrfs]
[162513.519222] btrfs_create+0x57/0x200 [btrfs]
[162513.519230] lookup_open+0x522/0x650
[162513.519246] path_openat+0x2b8/0xa50
[162513.519270] do_filp_open+0x91/0x100
[162513.519275] ? find_held_lock+0x32/0x90
[162513.519280] ? lock_acquired+0x33b/0x470
[162513.519285] ? do_raw_spin_unlock+0x4b/0xc0
[162513.519287] ? _raw_spin_unlock+0x29/0x40
[162513.519295] do_sys_openat2+0x20d/0x2d0
[162513.519300] do_sys_open+0x44/0x80
[162513.519304] do_syscall_64+0x33/0x80
[162513.519307] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[162513.519309] RIP: 0033:0x7f5238f4a903
[162513.519310] Code: Bad RIP value.
[162513.519312] RSP: 002b:00007fff67b97758 EFLAGS: 00000246 ORIG_RAX: 0000000000000055
[162513.519314] RAX: ffffffffffffffda RBX: 00000000ffffffff RCX: 00007f5238f4a903
[162513.519316] RDX: 0000000000000000 RSI: 00000000000001b6 RDI: 000055b1fbb0d470
[162513.519317] RBP: 00007fff67b978c0 R08: 0000000000000001 R09: 0000000000000002
[162513.519319] R10: 00007fff67b974f7 R11: 0000000000000246 R12: 0000000000000013
[162513.519320] R13: 00000000000001b6 R14: 00007fff67b97906 R15: 000055b1fad1c620
[162513.519332] INFO: task btrfs:1356211 blocked for more than 120 seconds.
[162513.519727] Not tainted 5.9.0-rc6-btrfs-next-69 #1
[162513.520115] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[162513.520508] task:btrfs state:D stack: 0 pid:1356211 ppid:1356178 flags:0x00004002
[162513.520511] Call Trace:
[162513.520516] __schedule+0x5ce/0xd00
[162513.520519] ? _raw_spin_unlock_irqrestore+0x3c/0x60
[162513.520525] schedule+0x46/0xf0
[162513.520544] btrfs_scrub_pause+0x11f/0x180 [btrfs]
[162513.520548] ? finish_wait+0x90/0x90
[162513.520562] btrfs_commit_transaction+0x45a/0xc30 [btrfs]
[162513.520574] ? start_transaction+0xe0/0x5f0 [btrfs]
[162513.520596] btrfs_dev_replace_finishing+0x6d8/0x711 [btrfs]
[162513.520619] btrfs_dev_replace_by_ioctl.cold+0x1cc/0x1fd [btrfs]
[162513.520639] btrfs_ioctl+0x2a25/0x36f0 [btrfs]
[162513.520643] ? do_sigaction+0xf3/0x240
[162513.520645] ? find_held_lock+0x32/0x90
[162513.520648] ? do_sigaction+0xf3/0x240
[162513.520651] ? lock_acquired+0x33b/0x470
[162513.520655] ? _raw_spin_unlock_irq+0x24/0x50
[162513.520657] ? lockdep_hardirqs_on+0x7d/0x100
[162513.520660] ? _raw_spin_unlock_irq+0x35/0x50
[162513.520662] ? do_sigaction+0xf3/0x240
[162513.520671] ? __x64_sys_ioctl+0x83/0xb0
[162513.520672] __x64_sys_ioctl+0x83/0xb0
[162513.520677] do_syscall_64+0x33/0x80
[162513.520679] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[162513.520681] RIP: 0033:0x7fc3cd307d87
[162513.520682] Code: Bad RIP value.
[162513.520684] RSP: 002b:00007ffe30a56bb8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
[162513.520686] RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007fc3cd307d87
[162513.520687] RDX: 00007ffe30a57a30 RSI: 00000000ca289435 RDI: 0000000000000003
[162513.520689] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
[162513.520690] R10: 0000000000000008 R11: 0000000000000202 R12: 0000000000000003
[162513.520692] R13: 0000557323a212e0 R14: 00007ffe30a5a520 R15: 0000000000000001
[162513.520703]
Showing all locks held in the system:
[162513.520712] 1 lock held by khungtaskd/54:
[162513.520713] #0: ffffffffb40a91a0 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x15/0x197
[162513.520728] 1 lock held by in:imklog/596:
[162513.520729] #0: ffff8f3f0d781400 (&f->f_pos_lock){+.+.}-{3:3}, at: __fdget_pos+0x4d/0x60
[162513.520782] 1 lock held by btrfs-transacti/1356167:
[162513.520784] #0: ffff8f3d810cc848 (&fs_info->transaction_kthread_mutex){+.+.}-{3:3}, at: transaction_kthread+0x4a/0x170 [btrfs]
[162513.520798] 1 lock held by btrfs/1356190:
[162513.520800] #0: ffff8f3d57644470 (sb_writers#15){.+.+}-{0:0}, at: mnt_want_write_file+0x22/0x60
[162513.520805] 1 lock held by fsstress/1356184:
[162513.520806] #0: ffff8f3d576440e8 (&type->s_umount_key#62){++++}-{3:3}, at: iterate_supers+0x6f/0xf0
[162513.520811] 3 locks held by fsstress/1356185:
[162513.520812] #0: ffff8f3d57644470 (sb_writers#15){.+.+}-{0:0}, at: mnt_want_write+0x20/0x50
[162513.520815] #1: ffff8f3d80a650b8 (&type->i_mutex_dir_key#10){++++}-{3:3}, at: vfs_setxattr+0x50/0x120
[162513.520820] #2: ffff8f3d57644690 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40e/0x5f0 [btrfs]
[162513.520833] 1 lock held by fsstress/1356196:
[162513.520834] #0: ffff8f3d576440e8 (&type->s_umount_key#62){++++}-{3:3}, at: iterate_supers+0x6f/0xf0
[162513.520838] 3 locks held by fsstress/1356197:
[162513.520839] #0: ffff8f3d57644470 (sb_writers#15){.+.+}-{0:0}, at: mnt_want_write+0x20/0x50
[162513.520843] #1: ffff8f3d506465e8 (&type->i_mutex_dir_key#10){++++}-{3:3}, at: path_openat+0x2a7/0xa50
[162513.520846] #2: ffff8f3d57644690 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40e/0x5f0 [btrfs]
[162513.520858] 2 locks held by btrfs/1356211:
[162513.520859] #0: ffff8f3d810cde30 (&fs_info->dev_replace.lock_finishing_cancel_unmount){+.+.}-{3:3}, at: btrfs_dev_replace_finishing+0x52/0x711 [btrfs]
[162513.520877] #1: ffff8f3d57644690 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40e/0x5f0 [btrfs]
This was weird because the stack traces show that a transaction commit,
triggered by a device replace operation, is blocking trying to pause any
running scrubs but there are no stack traces of blocked tasks doing a
scrub.
After poking around with drgn, I noticed there was a scrub task that was
constantly running and blocking for shorts periods of time:
>>> t = find_task(prog, 1356190)
>>> prog.stack_trace(t)
#0 __schedule+0x5ce/0xcfc
#1 schedule+0x46/0xe4
#2 schedule_timeout+0x1df/0x475
#3 btrfs_reada_wait+0xda/0x132
#4 scrub_stripe+0x2a8/0x112f
#5 scrub_chunk+0xcd/0x134
#6 scrub_enumerate_chunks+0x29e/0x5ee
#7 btrfs_scrub_dev+0x2d5/0x91b
#8 btrfs_ioctl+0x7f5/0x36e7
#9 __x64_sys_ioctl+0x83/0xb0
#10 do_syscall_64+0x33/0x77
#11 entry_SYSCALL_64+0x7c/0x156
Which corresponds to:
int btrfs_reada_wait(void *handle)
{
struct reada_control *rc = handle;
struct btrfs_fs_info *fs_info = rc->fs_info;
while (atomic_read(&rc->elems)) {
if (!atomic_read(&fs_info->reada_works_cnt))
reada_start_machine(fs_info);
wait_event_timeout(rc->wait, atomic_read(&rc->elems) == 0,
(HZ + 9) / 10);
}
(...)
So the counter "rc->elems" was set to 1 and never decreased to 0, causing
the scrub task to loop forever in that function. Then I used the following
script for drgn to check the readahead requests:
$ cat dump_reada.py
import sys
import drgn
from drgn import NULL, Object, cast, container_of, execscript, \
reinterpret, sizeof
from drgn.helpers.linux import *
mnt_path = b"/home/fdmanana/btrfs-tests/scratch_1"
mnt = None
for mnt in for_each_mount(prog, dst = mnt_path):
pass
if mnt is None:
sys.stderr.write(f'Error: mount point {mnt_path} not found\n')
sys.exit(1)
fs_info = cast('struct btrfs_fs_info *', mnt.mnt.mnt_sb.s_fs_info)
def dump_re(re):
nzones = re.nzones.value_()
print(f're at {hex(re.value_())}')
print(f'\t logical {re.logical.value_()}')
print(f'\t refcnt {re.refcnt.value_()}')
print(f'\t nzones {nzones}')
for i in range(nzones):
dev = re.zones[i].device
name = dev.name.str.string_()
print(f'\t\t dev id {dev.devid.value_()} name {name}')
print()
for _, e in radix_tree_for_each(fs_info.reada_tree):
re = cast('struct reada_extent *', e)
dump_re(re)
$ drgn dump_reada.py
re at 0xffff8f3da9d25ad8
logical 38928384
refcnt 1
nzones 1
dev id 0 name b'/dev/sdd'
$
So there was one readahead extent with a single zone corresponding to the
source device of that last device replace operation logged in dmesg/syslog.
Also the ID of that zone's device was 0 which is a special value set in
the source device of a device replace operation when the operation finishes
(constant BTRFS_DEV_REPLACE_DEVID set at btrfs_dev_replace_finishing()),
confirming again that device /dev/sdd was the source of a device replace
operation.
Normally there should be as many zones in the readahead extent as there are
devices, and I wasn't expecting the extent to be in a block group with a
'single' profile, so I went and confirmed with the following drgn script
that there weren't any single profile block groups:
$ cat dump_block_groups.py
import sys
import drgn
from drgn import NULL, Object, cast, container_of, execscript, \
reinterpret, sizeof
from drgn.helpers.linux import *
mnt_path = b"/home/fdmanana/btrfs-tests/scratch_1"
mnt = None
for mnt in for_each_mount(prog, dst = mnt_path):
pass
if mnt is None:
sys.stderr.write(f'Error: mount point {mnt_path} not found\n')
sys.exit(1)
fs_info = cast('struct btrfs_fs_info *', mnt.mnt.mnt_sb.s_fs_info)
BTRFS_BLOCK_GROUP_DATA = (1 << 0)
BTRFS_BLOCK_GROUP_SYSTEM = (1 << 1)
BTRFS_BLOCK_GROUP_METADATA = (1 << 2)
BTRFS_BLOCK_GROUP_RAID0 = (1 << 3)
BTRFS_BLOCK_GROUP_RAID1 = (1 << 4)
BTRFS_BLOCK_GROUP_DUP = (1 << 5)
BTRFS_BLOCK_GROUP_RAID10 = (1 << 6)
BTRFS_BLOCK_GROUP_RAID5 = (1 << 7)
BTRFS_BLOCK_GROUP_RAID6 = (1 << 8)
BTRFS_BLOCK_GROUP_RAID1C3 = (1 << 9)
BTRFS_BLOCK_GROUP_RAID1C4 = (1 << 10)
def bg_flags_string(bg):
flags = bg.flags.value_()
ret = ''
if flags & BTRFS_BLOCK_GROUP_DATA:
ret = 'data'
if flags & BTRFS_BLOCK_GROUP_METADATA:
if len(ret) > 0:
ret += '|'
ret += 'meta'
if flags & BTRFS_BLOCK_GROUP_SYSTEM:
if len(ret) > 0:
ret += '|'
ret += 'system'
if flags & BTRFS_BLOCK_GROUP_RAID0:
ret += ' raid0'
elif flags & BTRFS_BLOCK_GROUP_RAID1:
ret += ' raid1'
elif flags & BTRFS_BLOCK_GROUP_DUP:
ret += ' dup'
elif flags & BTRFS_BLOCK_GROUP_RAID10:
ret += ' raid10'
elif flags & BTRFS_BLOCK_GROUP_RAID5:
ret += ' raid5'
elif flags & BTRFS_BLOCK_GROUP_RAID6:
ret += ' raid6'
elif flags & BTRFS_BLOCK_GROUP_RAID1C3:
ret += ' raid1c3'
elif flags & BTRFS_BLOCK_GROUP_RAID1C4:
ret += ' raid1c4'
else:
ret += ' single'
return ret
def dump_bg(bg):
print()
print(f'block group at {hex(bg.value_())}')
print(f'\t start {bg.start.value_()} length {bg.length.value_()}')
print(f'\t flags {bg.flags.value_()} - {bg_flags_string(bg)}')
bg_root = fs_info.block_group_cache_tree.address_of_()
for bg in rbtree_inorder_for_each_entry('struct btrfs_block_group', bg_root, 'cache_node'):
dump_bg(bg)
$ drgn dump_block_groups.py
block group at 0xffff8f3d673b0400
start 22020096 length 16777216
flags 258 - system raid6
block group at 0xffff8f3d53ddb400
start 38797312 length 536870912
flags 260 - meta raid6
block group at 0xffff8f3d5f4d9c00
start 575668224 length 2147483648
flags 257 - data raid6
block group at 0xffff8f3d08189000
start 2723151872 length 67108864
flags 258 - system raid6
block group at 0xffff8f3db70ff000
start 2790260736 length 1073741824
flags 260 - meta raid6
block group at 0xffff8f3d5f4dd800
start 3864002560 length 67108864
flags 258 - system raid6
block group at 0xffff8f3d67037000
start 3931111424 length 2147483648
flags 257 - data raid6
$
So there were only 2 reasons left for having a readahead extent with a
single zone: reada_find_zone(), called when creating a readahead extent,
returned NULL either because we failed to find the corresponding block
group or because a memory allocation failed. With some additional and
custom tracing I figured out that on every further ocurrence of the
problem the block group had just been deleted when we were looping to
create the zones for the readahead extent (at reada_find_extent()), so we
ended up with only one zone in the readahead extent, corresponding to a
device that ends up getting replaced.
So after figuring that out it became obvious why the hang happens:
1) Task A starts a scrub on any device of the filesystem, except for
device /dev/sdd;
2) Task B starts a device replace with /dev/sdd as the source device;
3) Task A calls btrfs_reada_add() from scrub_stripe() and it is currently
starting to scrub a stripe from block group X. This call to
btrfs_reada_add() is the one for the extent tree. When btrfs_reada_add()
calls reada_add_block(), it passes the logical address of the extent
tree's root node as its 'logical' argument - a value of 38928384;
4) Task A then enters reada_find_extent(), called from reada_add_block().
It finds there isn't any existing readahead extent for the logical
address 38928384, so it proceeds to the path of creating a new one.
It calls btrfs_map_block() to find out which stripes exist for the block
group X. On the first iteration of the for loop that iterates over the
stripes, it finds the stripe for device /dev/sdd, so it creates one
zone for that device and adds it to the readahead extent. Before getting
into the second iteration of the loop, the cleanup kthread deletes block
group X because it was empty. So in the iterations for the remaining
stripes it does not add more zones to the readahead extent, because the
calls to reada_find_zone() returned NULL because they couldn't find
block group X anymore.
As a result the new readahead extent has a single zone, corresponding to
the device /dev/sdd;
4) Before task A returns to btrfs_reada_add() and queues the readahead job
for the readahead work queue, task B finishes the device replace and at
btrfs_dev_replace_finishing() swaps the device /dev/sdd with the new
device /dev/sdg;
5) Task A returns to reada_add_block(), which increments the counter
"->elems" of the reada_control structure allocated at btrfs_reada_add().
Then it returns back to btrfs_reada_add() and calls
reada_start_machine(). This queues a job in the readahead work queue to
run the function reada_start_machine_worker(), which calls
__reada_start_machine().
At __reada_start_machine() we take the device list mutex and for each
device found in the current device list, we call
reada_start_machine_dev() to start the readahead work. However at this
point the device /dev/sdd was already freed and is not in the device
list anymore.
This means the corresponding readahead for the extent at 38928384 is
never started, and therefore the "->elems" counter of the reada_control
structure allocated at btrfs_reada_add() never goes down to 0, causing
the call to btrfs_reada_wait(), done by the scrub task, to wait forever.
Note that the readahead request can be made either after the device replace
started or before it started, however in pratice it is very unlikely that a
device replace is able to start after a readahead request is made and is
able to complete before the readahead request completes - maybe only on a
very small and nearly empty filesystem.
This hang however is not the only problem we can have with readahead and
device removals. When the readahead extent has other zones other than the
one corresponding to the device that is being removed (either by a device
replace or a device remove operation), we risk having a use-after-free on
the device when dropping the last reference of the readahead extent.
For example if we create a readahead extent with two zones, one for the
device /dev/sdd and one for the device /dev/sde:
1) Before the readahead worker starts, the device /dev/sdd is removed,
and the corresponding btrfs_device structure is freed. However the
readahead extent still has the zone pointing to the device structure;
2) When the readahead worker starts, it only finds device /dev/sde in the
current device list of the filesystem;
3) It starts the readahead work, at reada_start_machine_dev(), using the
device /dev/sde;
4) Then when it finishes reading the extent from device /dev/sde, it calls
__readahead_hook() which ends up dropping the last reference on the
readahead extent through the last call to reada_extent_put();
5) At reada_extent_put() it iterates over each zone of the readahead extent
and attempts to delete an element from the device's 'reada_extents'
radix tree, resulting in a use-after-free, as the device pointer of the
zone for /dev/sdd is now stale. We can also access the device after
dropping the last reference of a zone, through reada_zone_release(),
also called by reada_extent_put().
And a device remove suffers the same problem, however since it shrinks the
device size down to zero before removing the device, it is very unlikely to
still have readahead requests not completed by the time we free the device,
the only possibility is if the device has a very little space allocated.
While the hang problem is exclusive to scrub, since it is currently the
only user of btrfs_reada_add() and btrfs_reada_wait(), the use-after-free
problem affects any path that triggers readhead, which includes
btree_readahead_hook() and __readahead_hook() (a readahead worker can
trigger readahed for the children of a node) for example - any path that
ends up calling reada_add_block() can trigger the use-after-free after a
device is removed.
So fix this by waiting for any readahead requests for a device to complete
before removing a device, ensuring that while waiting for existing ones no
new ones can be made.
This problem has been around for a very long time - the readahead code was
added in 2011, device remove exists since 2008 and device replace was
introduced in 2013, hard to pick a specific commit for a git Fixes tag.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we fail to find suitable zones for a new readahead extent, we end up
leaving a stale pointer in the global readahead extents radix tree
(fs_info->reada_tree), which can trigger the following trace later on:
[13367.696354] BUG: kernel NULL pointer dereference, address: 00000000000000b0
[13367.696802] #PF: supervisor read access in kernel mode
[13367.697249] #PF: error_code(0x0000) - not-present page
[13367.697721] PGD 0 P4D 0
[13367.698171] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI
[13367.698632] CPU: 6 PID: 851214 Comm: btrfs Tainted: G W 5.9.0-rc6-btrfs-next-69 #1
[13367.699100] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[13367.700069] RIP: 0010:__lock_acquire+0x20a/0x3970
[13367.700562] Code: ff 1f 0f b7 c0 48 0f (...)
[13367.701609] RSP: 0018:ffffb14448f57790 EFLAGS: 00010046
[13367.702140] RAX: 0000000000000000 RBX: 29b935140c15e8cf RCX: 0000000000000000
[13367.702698] RDX: 0000000000000002 RSI: ffffffffb3d66bd0 RDI: 0000000000000046
[13367.703240] RBP: ffff8a52ba8ac040 R08: 00000c2866ad9288 R09: 0000000000000001
[13367.703783] R10: 0000000000000001 R11: 00000000b66d9b53 R12: ffff8a52ba8ac9b0
[13367.704330] R13: 0000000000000000 R14: ffff8a532b6333e8 R15: 0000000000000000
[13367.704880] FS: 00007fe1df6b5700(0000) GS:ffff8a5376600000(0000) knlGS:0000000000000000
[13367.705438] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[13367.705995] CR2: 00000000000000b0 CR3: 000000022cca8004 CR4: 00000000003706e0
[13367.706565] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[13367.707127] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[13367.707686] Call Trace:
[13367.708246] ? ___slab_alloc+0x395/0x740
[13367.708820] ? reada_add_block+0xae/0xee0 [btrfs]
[13367.709383] lock_acquire+0xb1/0x480
[13367.709955] ? reada_add_block+0xe0/0xee0 [btrfs]
[13367.710537] ? reada_add_block+0xae/0xee0 [btrfs]
[13367.711097] ? rcu_read_lock_sched_held+0x5d/0x90
[13367.711659] ? kmem_cache_alloc_trace+0x8d2/0x990
[13367.712221] ? lock_acquired+0x33b/0x470
[13367.712784] _raw_spin_lock+0x34/0x80
[13367.713356] ? reada_add_block+0xe0/0xee0 [btrfs]
[13367.713966] reada_add_block+0xe0/0xee0 [btrfs]
[13367.714529] ? btrfs_root_node+0x15/0x1f0 [btrfs]
[13367.715077] btrfs_reada_add+0x117/0x170 [btrfs]
[13367.715620] scrub_stripe+0x21e/0x10d0 [btrfs]
[13367.716141] ? kvm_sched_clock_read+0x5/0x10
[13367.716657] ? __lock_acquire+0x41e/0x3970
[13367.717184] ? scrub_chunk+0x60/0x140 [btrfs]
[13367.717697] ? find_held_lock+0x32/0x90
[13367.718254] ? scrub_chunk+0x60/0x140 [btrfs]
[13367.718773] ? lock_acquired+0x33b/0x470
[13367.719278] ? scrub_chunk+0xcd/0x140 [btrfs]
[13367.719786] scrub_chunk+0xcd/0x140 [btrfs]
[13367.720291] scrub_enumerate_chunks+0x270/0x5c0 [btrfs]
[13367.720787] ? finish_wait+0x90/0x90
[13367.721281] btrfs_scrub_dev+0x1ee/0x620 [btrfs]
[13367.721762] ? rcu_read_lock_any_held+0x8e/0xb0
[13367.722235] ? preempt_count_add+0x49/0xa0
[13367.722710] ? __sb_start_write+0x19b/0x290
[13367.723192] btrfs_ioctl+0x7f5/0x36f0 [btrfs]
[13367.723660] ? __fget_files+0x101/0x1d0
[13367.724118] ? find_held_lock+0x32/0x90
[13367.724559] ? __fget_files+0x101/0x1d0
[13367.724982] ? __x64_sys_ioctl+0x83/0xb0
[13367.725399] __x64_sys_ioctl+0x83/0xb0
[13367.725802] do_syscall_64+0x33/0x80
[13367.726188] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[13367.726574] RIP: 0033:0x7fe1df7add87
[13367.726948] Code: 00 00 00 48 8b 05 09 91 (...)
[13367.727763] RSP: 002b:00007fe1df6b4d48 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[13367.728179] RAX: ffffffffffffffda RBX: 000055ce1fb596a0 RCX: 00007fe1df7add87
[13367.728604] RDX: 000055ce1fb596a0 RSI: 00000000c400941b RDI: 0000000000000003
[13367.729021] RBP: 0000000000000000 R08: 00007fe1df6b5700 R09: 0000000000000000
[13367.729431] R10: 00007fe1df6b5700 R11: 0000000000000246 R12: 00007ffd922b07de
[13367.729842] R13: 00007ffd922b07df R14: 00007fe1df6b4e40 R15: 0000000000802000
[13367.730275] Modules linked in: btrfs blake2b_generic xor (...)
[13367.732638] CR2: 00000000000000b0
[13367.733166] ---[ end trace d298b6805556acd9 ]---
What happens is the following:
1) At reada_find_extent() we don't find any existing readahead extent for
the metadata extent starting at logical address X;
2) So we proceed to create a new one. We then call btrfs_map_block() to get
information about which stripes contain extent X;
3) After that we iterate over the stripes and create only one zone for the
readahead extent - only one because reada_find_zone() returned NULL for
all iterations except for one, either because a memory allocation failed
or it couldn't find the block group of the extent (it may have just been
deleted);
4) We then add the new readahead extent to the readahead extents radix
tree at fs_info->reada_tree;
5) Then we iterate over each zone of the new readahead extent, and find
that the device used for that zone no longer exists, because it was
removed or it was the source device of a device replace operation.
Since this left 'have_zone' set to 0, after finishing the loop we jump
to the 'error' label, call kfree() on the new readahead extent and
return without removing it from the radix tree at fs_info->reada_tree;
6) Any future call to reada_find_extent() for the logical address X will
find the stale pointer in the readahead extents radix tree, increment
its reference counter, which can trigger the use-after-free right
away or return it to the caller reada_add_block() that results in the
use-after-free of the example trace above.
So fix this by making sure we delete the readahead extent from the radix
tree if we fail to setup zones for it (when 'have_zone = 0').
Fixes: 3194502118 ("btrfs: reada: bypass adding extent when all zone failed")
CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If there's no parity and num_stripes < ncopies, a crafted image can
trigger a division by zero in calc_stripe_length().
The image was generated through fuzzing.
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=209587
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch addresses a compile warning:
fs/btrfs/extent-tree.c: In function '__btrfs_free_extent':
fs/btrfs/extent-tree.c:3187:4: warning: format '%lu' expects argument of type 'long unsigned int', but argument 8 has type 'unsigned int' [-Wformat=]
Fixes: 1c2a07f598 ("btrfs: extent-tree: kill BUG_ON() in __btrfs_free_extent()")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Pujin Shi <shipujin.t@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When doing a fallocate() we have a short time window, after reserving an
extent and before starting a transaction, where if relocation for the block
group containing the reserved extent happens, we can end up missing the
extent in the data relocation inode causing relocation to fail later.
This only happens when we don't pass a transaction to the internal
fallocate function __btrfs_prealloc_file_range(), which is for all the
cases where fallocate() is called from user space (the internal use cases
include space cache extent allocation and relocation).
When the race triggers the relocation failure, it produces a trace like
the following:
[200611.995995] ------------[ cut here ]------------
[200611.997084] BTRFS: Transaction aborted (error -2)
[200611.998208] WARNING: CPU: 3 PID: 235845 at fs/btrfs/ctree.c:1074 __btrfs_cow_block+0x3a0/0x5b0 [btrfs]
[200611.999042] Modules linked in: dm_thin_pool dm_persistent_data (...)
[200612.003287] CPU: 3 PID: 235845 Comm: btrfs Not tainted 5.9.0-rc6-btrfs-next-69 #1
[200612.004442] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[200612.006186] RIP: 0010:__btrfs_cow_block+0x3a0/0x5b0 [btrfs]
[200612.007110] Code: 1b 00 00 02 72 2a 83 f8 fb 0f 84 b8 01 (...)
[200612.007341] BTRFS warning (device sdb): Skipping commit of aborted transaction.
[200612.008959] RSP: 0018:ffffaee38550f918 EFLAGS: 00010286
[200612.009672] BTRFS: error (device sdb) in cleanup_transaction:1901: errno=-30 Readonly filesystem
[200612.010428] RAX: 0000000000000000 RBX: ffff9174d96f4000 RCX: 0000000000000000
[200612.011078] BTRFS info (device sdb): forced readonly
[200612.011862] RDX: 0000000000000001 RSI: ffffffffa8161978 RDI: 00000000ffffffff
[200612.013215] RBP: ffff9172569a0f80 R08: 0000000000000000 R09: 0000000000000000
[200612.014263] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9174b8403b88
[200612.015203] R13: ffff9174b8400a88 R14: ffff9174c90f1000 R15: ffff9174a5a60e08
[200612.016182] FS: 00007fa55cf878c0(0000) GS:ffff9174ece00000(0000) knlGS:0000000000000000
[200612.017174] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[200612.018418] CR2: 00007f8fb8048148 CR3: 0000000428a46003 CR4: 00000000003706e0
[200612.019510] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[200612.020648] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[200612.021520] Call Trace:
[200612.022434] btrfs_cow_block+0x10b/0x250 [btrfs]
[200612.023407] do_relocation+0x54e/0x7b0 [btrfs]
[200612.024343] ? do_raw_spin_unlock+0x4b/0xc0
[200612.025280] ? _raw_spin_unlock+0x29/0x40
[200612.026200] relocate_tree_blocks+0x3bc/0x6d0 [btrfs]
[200612.027088] relocate_block_group+0x2f3/0x600 [btrfs]
[200612.027961] btrfs_relocate_block_group+0x15e/0x340 [btrfs]
[200612.028896] btrfs_relocate_chunk+0x38/0x110 [btrfs]
[200612.029772] btrfs_balance+0xb22/0x1790 [btrfs]
[200612.030601] ? btrfs_ioctl_balance+0x253/0x380 [btrfs]
[200612.031414] btrfs_ioctl_balance+0x2cf/0x380 [btrfs]
[200612.032279] btrfs_ioctl+0x620/0x36f0 [btrfs]
[200612.033077] ? _raw_spin_unlock+0x29/0x40
[200612.033948] ? handle_mm_fault+0x116d/0x1ca0
[200612.034749] ? up_read+0x18/0x240
[200612.035542] ? __x64_sys_ioctl+0x83/0xb0
[200612.036244] __x64_sys_ioctl+0x83/0xb0
[200612.037269] do_syscall_64+0x33/0x80
[200612.038190] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[200612.038976] RIP: 0033:0x7fa55d07ed87
[200612.040127] Code: 00 00 00 48 8b 05 09 91 0c 00 64 c7 00 26 (...)
[200612.041669] RSP: 002b:00007ffd5ebf03e8 EFLAGS: 00000206 ORIG_RAX: 0000000000000010
[200612.042437] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fa55d07ed87
[200612.043511] RDX: 00007ffd5ebf0470 RSI: 00000000c4009420 RDI: 0000000000000003
[200612.044250] RBP: 0000000000000003 R08: 000055d8362642a0 R09: 00007fa55d148be0
[200612.044963] R10: fffffffffffff52e R11: 0000000000000206 R12: 00007ffd5ebf1614
[200612.045683] R13: 00007ffd5ebf0470 R14: 0000000000000002 R15: 00007ffd5ebf0470
[200612.046361] irq event stamp: 0
[200612.047040] hardirqs last enabled at (0): [<0000000000000000>] 0x0
[200612.047725] hardirqs last disabled at (0): [<ffffffffa6eb5ab3>] copy_process+0x823/0x1bc0
[200612.048387] softirqs last enabled at (0): [<ffffffffa6eb5ab3>] copy_process+0x823/0x1bc0
[200612.049024] softirqs last disabled at (0): [<0000000000000000>] 0x0
[200612.049722] ---[ end trace 49006c6876e65227 ]---
The race happens like this:
1) Task A starts an fallocate() (plain or zero range) and it calls
__btrfs_prealloc_file_range() with the 'trans' parameter set to NULL;
2) Task A calls btrfs_reserve_extent() and gets an extent that belongs to
block group X;
3) Before task A gets into btrfs_replace_file_extents(), through the call
to insert_prealloc_file_extent(), task B starts relocation of block
group X;
4) Task B enters btrfs_relocate_block_group() and it sets block group X to
RO mode;
5) Task B enters relocate_block_group(), it calls prepare_to_relocate()
whichs joins/starts a transaction and then commits the transaction;
6) Task B then starts scanning the extent tree looking for extents that
belong to block group X - it does not find yet the extent reserved by
task A, since that extent was not yet added to the extent tree, as its
delayed reference was not even yet created at this point;
7) The data relocation inode ends up not having the extent reserved by
task A associated to it;
8) Task A then starts a transaction through btrfs_replace_file_extents(),
inserts a file extent item in the subvolume tree pointing to the
reserved extent and creates a delayed reference for it;
9) Task A finishes and returns success to user space;
10) Later on, while relocation is still in progress, the leaf where task A
inserted the new file extent item is COWed, so we end up at
__btrfs_cow_block(), which calls btrfs_reloc_cow_block(), and that in
turn calls relocation.c:replace_file_extents();
11) At relocation.c:replace_file_extents() we iterate over all the items in
the leaf and find the file extent item pointing to the extent that was
allocated by task A, and then call relocation.c:get_new_location(), to
find the new location for the extent;
12) However relocation.c:get_new_location() fails, returning -ENOENT,
because it couldn't find a corresponding file extent item associated
with the data relocation inode. This is because the extent was not seen
in the extent tree at step 6). The -ENOENT error is propagated to
__btrfs_cow_block(), which aborts the transaction.
So fix this simply by decrementing the block group's number of reservations
after calling insert_prealloc_file_extent(), as relocation waits for that
counter to go down to zero before calling prepare_to_relocate() and start
looking for extents in the extent tree.
This issue only started to happen recently as of commit 8fccebfa53
("btrfs: fix metadata reservation for fallocate that leads to transaction
aborts"), because now we can reserve an extent before starting/joining a
transaction, and previously we always did it after that, so relocation
ended up waiting for a concurrent fallocate() to finish because before
searching for the extents of the block group, it starts/joins a transaction
and then commits it (at prepare_to_relocate()), which made it wait for the
fallocate task to complete first.
Fixes: 8fccebfa53 ("btrfs: fix metadata reservation for fallocate that leads to transaction aborts")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=LzyE
-----END PGP SIGNATURE-----
Merge tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- Series of merge handling cleanups (Baolin, Christoph)
- Series of blk-throttle fixes and cleanups (Baolin)
- Series cleaning up BDI, seperating the block device from the
backing_dev_info (Christoph)
- Removal of bdget() as a generic API (Christoph)
- Removal of blkdev_get() as a generic API (Christoph)
- Cleanup of is-partition checks (Christoph)
- Series reworking disk revalidation (Christoph)
- Series cleaning up bio flags (Christoph)
- bio crypt fixes (Eric)
- IO stats inflight tweak (Gabriel)
- blk-mq tags fixes (Hannes)
- Buffer invalidation fixes (Jan)
- Allow soft limits for zone append (Johannes)
- Shared tag set improvements (John, Kashyap)
- Allow IOPRIO_CLASS_RT for CAP_SYS_NICE (Khazhismel)
- DM no-wait support (Mike, Konstantin)
- Request allocation improvements (Ming)
- Allow md/dm/bcache to use IO stat helpers (Song)
- Series improving blk-iocost (Tejun)
- Various cleanups (Geert, Damien, Danny, Julia, Tetsuo, Tian, Wang,
Xianting, Yang, Yufen, yangerkun)
* tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (191 commits)
block: fix uapi blkzoned.h comments
blk-mq: move cancel of hctx->run_work to the front of blk_exit_queue
blk-mq: get rid of the dead flush handle code path
block: get rid of unnecessary local variable
block: fix comment and add lockdep assert
blk-mq: use helper function to test hw stopped
block: use helper function to test queue register
block: remove redundant mq check
block: invoke blk_mq_exit_sched no matter whether have .exit_sched
percpu_ref: don't refer to ref->data if it isn't allocated
block: ratelimit handle_bad_sector() message
blk-throttle: Re-use the throtl_set_slice_end()
blk-throttle: Open code __throtl_de/enqueue_tg()
blk-throttle: Move service tree validation out of the throtl_rb_first()
blk-throttle: Move the list operation after list validation
blk-throttle: Fix IO hang for a corner case
blk-throttle: Avoid tracking latency if low limit is invalid
blk-throttle: Avoid getting the current time if tg->last_finish_time is 0
blk-throttle: Remove a meaningless parameter for throtl_downgrade_state()
block: Remove redundant 'return' statement
...
Commit 8d875f95da ("btrfs: disable strict file flushes for
renames and truncates") eliminated the notion of ordered operations and
instead BTRFS_INODE_ORDERED_DATA_CLOSE only remained as a flag
indicating that a file's content should be synced to disk in case a
file is truncated and any writes happen to it concurrently. In fact
this intendend behavior was broken until it was fixed in
f6dc45c7a9 ("Btrfs: fix filemap_flush call in btrfs_file_release").
All things considered let's give the flag a more descriptive name. Also
slightly reword comments.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch fixes the following sparse errors in
fs/btrfs/super.c in function btrfs_show_devname()
fs/btrfs/super.c: error: incompatible types in comparison expression (different address spaces):
fs/btrfs/super.c: struct rcu_string [noderef] <asn:4> *
fs/btrfs/super.c: struct rcu_string *
The error was because of the following line in function btrfs_show_devname():
if (first_dev)
seq_escape(m, rcu_str_deref(first_dev->name), " \t\n\\");
Annotating the btrfs_device::name member with __rcu fixes the sparse
error.
Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik04@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Many things can happen after the device is scanned and before the device
is mounted. One such thing is losing the BTRFS_MAGIC on the device.
If it happens we still won't free that device from the memory and cause
the userland confusion.
For example: As the BTRFS_IOC_DEV_INFO still carries the device path
which does not have the BTRFS_MAGIC, 'btrfs fi show' still lists
device which does not belong to the filesystem anymore:
$ mkfs.btrfs -fq -draid1 -mraid1 /dev/sda /dev/sdb
$ wipefs -a /dev/sdb
# /dev/sdb does not contain magic signature
$ mount -o degraded /dev/sda /btrfs
$ btrfs fi show -m
Label: none uuid: 470ec6fb-646b-4464-b3cb-df1b26c527bd
Total devices 2 FS bytes used 128.00KiB
devid 1 size 3.00GiB used 571.19MiB path /dev/sda
devid 2 size 3.00GiB used 571.19MiB path /dev/sdb
We need to distinguish the missing signature and invalid superblock, so
add a specific error code ENODATA for that. This also fixes failure of
fstest btrfs/198.
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In fstest btrfs/064 a transaction abort in __btrfs_cow_block could lead
to a system lockup. It gets stuck trying to write back inodes, and the
write back thread was trying to lock an extent buffer:
$ cat /proc/2143497/stack
[<0>] __btrfs_tree_lock+0x108/0x250
[<0>] lock_extent_buffer_for_io+0x35e/0x3a0
[<0>] btree_write_cache_pages+0x15a/0x3b0
[<0>] do_writepages+0x28/0xb0
[<0>] __writeback_single_inode+0x54/0x5c0
[<0>] writeback_sb_inodes+0x1e8/0x510
[<0>] wb_writeback+0xcc/0x440
[<0>] wb_workfn+0xd7/0x650
[<0>] process_one_work+0x236/0x560
[<0>] worker_thread+0x55/0x3c0
[<0>] kthread+0x13a/0x150
[<0>] ret_from_fork+0x1f/0x30
This is because we got an error while COWing a block, specifically here
if (test_bit(BTRFS_ROOT_SHAREABLE, &root->state)) {
ret = btrfs_reloc_cow_block(trans, root, buf, cow);
if (ret) {
btrfs_abort_transaction(trans, ret);
return ret;
}
}
[16402.241552] BTRFS: Transaction aborted (error -2)
[16402.242362] WARNING: CPU: 1 PID: 2563188 at fs/btrfs/ctree.c:1074 __btrfs_cow_block+0x376/0x540
[16402.249469] CPU: 1 PID: 2563188 Comm: fsstress Not tainted 5.9.0-rc6+ #8
[16402.249936] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
[16402.250525] RIP: 0010:__btrfs_cow_block+0x376/0x540
[16402.252417] RSP: 0018:ffff9cca40e578b0 EFLAGS: 00010282
[16402.252787] RAX: 0000000000000025 RBX: 0000000000000002 RCX: ffff9132bbd19388
[16402.253278] RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff9132bbd19380
[16402.254063] RBP: ffff9132b41a49c0 R08: 0000000000000000 R09: 0000000000000000
[16402.254887] R10: 0000000000000000 R11: ffff91324758b080 R12: ffff91326ef17ce0
[16402.255694] R13: ffff91325fc0f000 R14: ffff91326ef176b0 R15: ffff9132815e2000
[16402.256321] FS: 00007f542c6d7b80(0000) GS:ffff9132bbd00000(0000) knlGS:0000000000000000
[16402.256973] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[16402.257374] CR2: 00007f127b83f250 CR3: 0000000133480002 CR4: 0000000000370ee0
[16402.257867] Call Trace:
[16402.258072] btrfs_cow_block+0x109/0x230
[16402.258356] btrfs_search_slot+0x530/0x9d0
[16402.258655] btrfs_lookup_file_extent+0x37/0x40
[16402.259155] __btrfs_drop_extents+0x13c/0xd60
[16402.259628] ? btrfs_block_rsv_migrate+0x4f/0xb0
[16402.259949] btrfs_replace_file_extents+0x190/0x820
[16402.260873] btrfs_clone+0x9ae/0xc00
[16402.261139] btrfs_extent_same_range+0x66/0x90
[16402.261771] btrfs_remap_file_range+0x353/0x3b1
[16402.262333] vfs_dedupe_file_range_one.part.0+0xd5/0x140
[16402.262821] vfs_dedupe_file_range+0x189/0x220
[16402.263150] do_vfs_ioctl+0x552/0x700
[16402.263662] __x64_sys_ioctl+0x62/0xb0
[16402.264023] do_syscall_64+0x33/0x40
[16402.264364] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[16402.264862] RIP: 0033:0x7f542c7d15cb
[16402.266901] RSP: 002b:00007ffd35944ea8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[16402.267627] RAX: ffffffffffffffda RBX: 00000000009d1968 RCX: 00007f542c7d15cb
[16402.268298] RDX: 00000000009d2490 RSI: 00000000c0189436 RDI: 0000000000000003
[16402.268958] RBP: 00000000009d2520 R08: 0000000000000036 R09: 00000000009d2e64
[16402.269726] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000002
[16402.270659] R13: 000000000001f000 R14: 00000000009d1970 R15: 00000000009d2e80
[16402.271498] irq event stamp: 0
[16402.271846] hardirqs last enabled at (0): [<0000000000000000>] 0x0
[16402.272497] hardirqs last disabled at (0): [<ffffffff910dbf59>] copy_process+0x6b9/0x1ba0
[16402.273343] softirqs last enabled at (0): [<ffffffff910dbf59>] copy_process+0x6b9/0x1ba0
[16402.273905] softirqs last disabled at (0): [<0000000000000000>] 0x0
[16402.274338] ---[ end trace 737874a5a41a8236 ]---
[16402.274669] BTRFS: error (device dm-9) in __btrfs_cow_block:1074: errno=-2 No such entry
[16402.276179] BTRFS info (device dm-9): forced readonly
[16402.277046] BTRFS: error (device dm-9) in btrfs_replace_file_extents:2723: errno=-2 No such entry
[16402.278744] BTRFS: error (device dm-9) in __btrfs_cow_block:1074: errno=-2 No such entry
[16402.279968] BTRFS: error (device dm-9) in __btrfs_cow_block:1074: errno=-2 No such entry
[16402.280582] BTRFS info (device dm-9): balance: ended with status: -30
The problem here is that as soon as we allocate the new block it is
locked and marked dirty in the btree inode. This means that we could
attempt to writeback this block and need to lock the extent buffer.
However we're not unlocking it here and thus we deadlock.
Fix this by unlocking the cow block if we have any errors inside of
__btrfs_cow_block, and also free it so we do not leak it.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since we now perform direct reads using i_rwsem, we can remove this
inode flag used to co-ordinate unlocked reads.
The truncate call takes i_rwsem. This means it is correctly synchronized
with concurrent direct reads.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jth@kernel.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
I noticed when fixing device stats for seed devices that we simply threw
away the return value from btrfs_search_slot(). This is because we may
not have stat items, but we could very well get an error, and thus miss
reporting the error up the chain.
Fix this by returning ret if it's an actual error, and then stop trying
to init the rest of the devices stats and return the error up the chain.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We recently started recording device stats across the fleet, and noticed
a large increase in messages such as this
BTRFS warning (device dm-0): get dev_stats failed, not yet valid
on our tiers that use seed devices for their root devices. This is
because we do not initialize the device stats for any seed devices if we
have a sprout device and mount using that sprout device. The basic
steps for reproducing are:
$ mkfs seed device
$ mount seed device
# fill seed device
$ umount seed device
$ btrfstune -S 1 seed device
$ mount seed device
$ btrfs device add -f sprout device /mnt/wherever
$ umount /mnt/wherever
$ mount sprout device /mnt/wherever
$ btrfs device stats /mnt/wherever
This will fail with the above message in dmesg.
Fix this by iterating over the fs_devices->seed if they exist in
btrfs_init_dev_stats. This fixed the problem and properly reports the
stats for both devices.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ rename to btrfs_device_init_dev_stats ]
Signed-off-by: David Sterba <dsterba@suse.com>
It's no longer used just remove the function and any related code which
was initialising it for inodes. No functional changes.
Removing 8 bytes from extent_io_tree in turn reduces size of other
structures where it is embedded, notably btrfs_inode where it reduces
size by 24 bytes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
No need to go through a function pointer indirection simply call
submit_bio_hook directly by exporting and renaming the helper to
btrfs_submit_metadata_bio. This makes the code more readable and should
result in somewhat faster code due to no longer paying the price for
specualtive attack mitigations that come with indirect function calls.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead export and rename the function to btrfs_submit_data_bio and
call it directly in submit_one_bio. This avoids paying the cost for
speculative attacks mitigations and improves code readability.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the is_data_inode helper.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
BTRFS has 2 inode types (for the purposes of the code in submit_one_bio)
- ordinary data inodes (including the freespace inode) and the btree
inode. Both of these implement submit_bio_hook so btrfsic_submit_bio can
never be called from submit_one_bio so just remove it.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's no longer used so let's remove it.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba