The `usbip list -l' command shows your local usb-devices.
Example:
$ usbip list -l
$ Local USB devices
$ =================
$ - busid 1-1 (13fe:1d00)
$ 1-1:1.0 -> usb-storage
$
$ - busid 1-2 (0409:55aa)
$ 1-2:1.0 -> hub
However this list command doesn't show which device is connected
to this busid. Therefore you have to use another tool e.g. lsusb
to determine that.
This patches adds the possibility to see which device that is.
Example:
$ usbip list -l
$ Local USB devices
$ =================
$ - busid 1-1 (13fe:1d00)
$ Kingston Technology Company Inc. : DataTraveler 2.0 1GB/4GB Flash Drive / Patriot Xporter 4GB Flash
$ 1-1:1.0 -> usb-storage
$
$ - busid 1-2 (0409:55aa)
$ NEC Corp. : Hub (0409:55aa)
$ 1-2:1.0 -> hub
If parsable is specified the info will be not printed.
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The command `usbip attach' uses --host for specifing
the remote host, while `usbip list' uses --remote.
This is confusing and this patch adapts this.
In Addition changed the manpage and README accordingly.
Before:
$ usbip attach --host <host> -b <busid>
$ usbip list --remote <host>
Now:
$ usbip attach --remote <host> -b <busid>
$ usbip list --remote <host>
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the names.c/names.h are taken from another project, some
functions which names.c provides aren't used by usbipd.
This patch fixes:
- removed useless comments
- unified debug/error messages by using the macros
provided by usbip_common.h
- removed unnused code
The code cleanup includes:
- remove unused data structures
- remove code to create them
- remove code to access them
The file names.c is used to parse the `usb.ids' file. The parser
stores a lot of information about usb devices that is never used.
The `usb.ids' file has several sections. Some variables (like
`lasthut') store the ID of the current section, and those variables
are used to decide which section is currently being parsed (i.e. in
which data structure the current line will be stored).
We removed the code to read those IDs because they are never used
anyway. We replaced them by the pseudo-ID `1' (instead of reading the
ID from the file) to indicate that the parser is in a section that
can be ignored. If the parser is in such a section, the current line
(which contains sub-items for this section) is discarded.
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since no usbip_name function is used in usbipd, it's not
necessary to parse "usb.ids" file at startup.
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch simplified "stub_device_free" cleanup function:
- changed return type to void, since the return value is
not checked anywhere
- kfree is NULL-safe, so removed if statement
- deleted debug-message
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This for loop is not needed, since STUB_BUSID_OTHER is defined as 0.
In Addition added a comment if STUB_BUSID_OTHER changes sometime.
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In each if-else case "return" is called. This is why
these if-else-statements are useless. Removing them
improves understanding and readability.
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In each errorcase spin_unlock_irq is called and -EINVAL is returned.
To simplify that I created a label called "err" doing that.
On Success count will be returned.
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove broken preprocessor macro "hardware". It is unused and it
references an element (pdev in vhci_hcd) that does not exist.
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enumerations for one comment makes no sense.
This is why this should be removed.
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reformat function stub_recv_cmd_unlink() to improve readability.
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following checkpatch warning:
-WARNING: line over 80 characters
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following checkpatch errors:
-ERROR: space required after that ','
-ERROR: spaces required around that '='
-ERROR: space prohibited before that close parenthesis
-WARNING: please, no space before tabs
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following checkpatch warning:
-WARNING: braces {} are not necessary for any arm of this statement
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following checkpatch warning:
-WARNING: missing space after enum definition
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following checkpatch error:
-ERROR: do not use assignment in if condition
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes some of the following checkpatch warnings:
-WARNING: line over 80 characters
We did not split format strings for readability.
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following checkpatch error:
-ERROR: "(foo*)" should be "(foo *)"
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following checkpatch error:
-ERROR: spaces required around that '='
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following checkpatch errors:
-ERROR: do not initialise statics to 0 or NULL
-ERROR: do not initialise globals to 0 or NULL
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following checkpatch warning:
-ERROR: code indent should use tabs where possible
-WARNING: suspect code indent for conditional statements
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull vfs pile (part one) from Al Viro:
"Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent
locking violations, etc.
The most visible changes here are death of FS_REVAL_DOT (replaced with
"has ->d_weak_revalidate()") and a new helper getting from struct file
to inode. Some bits of preparation to xattr method interface changes.
Misc patches by various people sent this cycle *and* ocfs2 fixes from
several cycles ago that should've been upstream right then.
PS: the next vfs pile will be xattr stuff."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
saner proc_get_inode() calling conventions
proc: avoid extra pde_put() in proc_fill_super()
fs: change return values from -EACCES to -EPERM
fs/exec.c: make bprm_mm_init() static
ocfs2/dlm: use GFP_ATOMIC inside a spin_lock
ocfs2: fix possible use-after-free with AIO
ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path
get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero
target: writev() on single-element vector is pointless
export kernel_write(), convert open-coded instances
fs: encode_fh: return FILEID_INVALID if invalid fid_type
kill f_vfsmnt
vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op
nfsd: handle vfs_getattr errors in acl protocol
switch vfs_getattr() to struct path
default SET_PERSONALITY() in linux/elf.h
ceph: prepopulate inodes only when request is aborted
d_hash_and_lookup(): export, switch open-coded instances
9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate()
9p: split dropping the acls from v9fs_set_create_acl()
...
sparse complains about these functions:
usbip/stub_dev.c:529:5: warning: symbol 'stub_pre_reset' was not declared. Should it be static?
usbip/stub_dev.c:535:5: warning: symbol 'stub_post_reset' was not declared. Should it be static?
-> add static keyword to silence the warning and make sparse happy.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
alloc failures already get standardized OOM
messages and a dump_stack.
For the affected mallocs around these OOM messages:
Converted kzallocs with multiplies to kcalloc.
Converted kmallocs with multiplies to kmalloc_array.
Converted a kmalloc/strlen/strncpy to kstrdup.
Moved a spin_lock below a removed OOM message and
removed a now unnecessary spin_unlock.
Neatened alignment and whitespace.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On the client side, we have a virtual hcd driver, there actually no
hardware interrupts, so we do not need worry about race conditions
caused by irq with spinlock held. Turning off irq is not good for system
performance after all. Just replace them with a non interrupt safe
version.
Signed-off-by: Harvey Yang <harvey.huawei.yang@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function 'usbip_event_add()' may be called in interrupt context on
the stub side:
'stub_complete'->'stub_enqueue_ret_unlink'->'usbip_event_add'.
In this function it tries to get the lock 'ud->lock', so we should
disable irq when we get this lock in process context.
Signed-off-by: Harvey Yang <harvey.huawei.yang@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add missing angle bracket before and after the URL.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If mkdir() of VHCI_STATE_PATH fails because the directory
already exists, that's not an error. This patch fixes
annoying "record connection" errors that would typically
come up on attach.
Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Acked-by: David Chang <dchang@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This comes handy when hacking with different cross
compilers, some of which may or may not have
_FORTIFY_SOURCE turned on by default. This patch
allows us to turn _FORTIFY_SOURCE on by specifying
--with-fortify option at configuration time (or
to turn it off by specifying --without-fortify).
If nothing is specified, default compiler behavior
is assumed.
Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USBIP daemon relies on functions available in glib2 library
to spawn handler code for incoming connection. This makes the
whole program dependent on glib2 library, which is a GNOME library
that on systems that don't have GNOME results in pulling more
dependency, only to be able to run a relatively trivial
socket-based program.
While this may not seem to be a problem on full-blown desktops
that already have the necessary libraries, it is a big issue
on small embedded systems (think USB hub with an Ethernet port)
that only have bare essentials in their file systems.
This patch eliminates glib2 dependency by reworking the
code to use lower level system calls to dispatch connection
handler. Instead of using glib2-style event loop and dispatching
mechanism, just do a ppoll(2) system call in our own loop and call
accept(2) followed by fork(2) on the socket that has incoming
connection. Stevens' books taught us that more than twenty
years ago. No need for anything smarter in a simple server, such
as usbipd.
Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are a bunch of automatically generated files that git
should not care about.
Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
File doc/usbip_bind_driver.8 does not exist any more but it is
listed in dist_man_MANS. This breaks the build of the userspace.
Remove the file from the list.
Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Acked-by: David Chang <dchang@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer
needed.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Matt Mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
with the last detached port state file remaining, usbip reports error on
attaching. So clean up the state files on detaching.
Signed-off-by: Harvey Yang <harvey.huawei.yang@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If probe returns with error, the kthread is still alive even when all
usbip modules unloaded. So do cleanups in error handler.
Signed-off-by: harvey.yang <harvey.huawei.yang@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
HC_STATE_RUNNING is already set by the usb core.
Signed-off-by: Bernard Blackham <b-linuxgit@largestprime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usbip takes a reference on a struct file which is passed in via
sysfs. Previously, this reference was never cleaned up, although
the socket it referred to was.
This patch drops the corresponding reference (found with the
socket's ->file backpointer) instead of just closing the socket.
Signed-off-by: Bernard Blackham <b-linuxgit@largestprime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replaced pointer arithmetic by using array indexing, and changed
function return type for usbip_alloc_iso_desc_pdu from 'void*' to
'struct usbip_iso_packet_descriptor'.
Signed-off-by: Bart Westgeest <bart@elbrys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here is the big USB pull request for 3.7-rc1
There are lots of gadget driver changes (including copying a bunch of
files into the drivers/staging/ccg/ directory so that the other gadget
drivers can be fixed up properly without breaking that driver), and we
remove the old obsolete ub.c driver from the tree. There are also the
usual XHCI set of updates, and other various driver changes and updates.
We also are trying hard to remove the old dbg() macro, but the final
bits of that removal will be coming in through the networking tree
before we can delete it for good.
All of these patches have been in the linux-next tree.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlBp3+AACgkQMUfUDdst+ym5vwCfe93FyJyXn/RDkGz7iBemvWFd
vrwAoIxjaOa4/yWZWcgrWc5bP4aO3ssc
=jYDr
-----END PGP SIGNATURE-----
Merge tag 'usb-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB changes from Greg Kroah-Hartman:
"Here is the big USB pull request for 3.7-rc1
There are lots of gadget driver changes (including copying a bunch of
files into the drivers/staging/ccg/ directory so that the other gadget
drivers can be fixed up properly without breaking that driver), and we
remove the old obsolete ub.c driver from the tree.
There are also the usual XHCI set of updates, and other various driver
changes and updates. We also are trying hard to remove the old dbg()
macro, but the final bits of that removal will be coming in through
the networking tree before we can delete it for good.
All of these patches have been in the linux-next tree.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
Fix up several annoying - but fairly mindless - conflicts due to the
termios structure having moved into the tty device, and often clashing
with dbg -> dev_dbg conversion.
* tag 'usb-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (339 commits)
USB: ezusb: move ezusb.c from drivers/usb/serial to drivers/usb/misc
USB: uas: fix gcc warning
USB: uas: fix locking
USB: Fix race condition when removing host controllers
USB: uas: add locking
USB: uas: fix abort
USB: uas: remove aborted field, replace with status bit.
USB: uas: fix task management
USB: uas: keep track of command urbs
xhci: Intel Panther Point BEI quirk.
powerpc/usb: remove checking PHY_CLK_VALID for UTMI PHY
USB: ftdi_sio: add TIAO USB Multi-Protocol Adapter (TUMPA) support
Revert "usb : Add sysfs files to control port power."
USB: serial: remove vizzini driver
usb: host: xhci: Fix Null pointer dereferencing with 71c731a for non-x86 systems
Increase XHCI suspend timeout to 16ms
USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq
USB: sierra_ms: don't keep unused variable
fsl/usb: Add support for USB controller version 2.4
USB: qcaux: add Pantech vendor class match
...
As discussed at the kernel summit this year, CONFIG_EXPERIMENTAL means
nothing, so let's get rid of it.
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kurt Kanzenbach