Commit Graph

156 Commits

Author SHA1 Message Date
Akinobu Mita d6b09e754c fault-injection: fix failcmd.sh warning
"fault-injection: add tool to run command with failslab or
fail_page_alloc" added tools/testing/fault-injection/failcmd.sh to make it
easier to inject slab/page allocation failures by fault injection.

failcmd.sh prints the following warning when running with arguments
for command.

	# ./failcmd.sh echo aaa
	failcmd.sh: line 209: [: echo: binary operator expected
	aaa

This warning is caused by an improper check whether at least one
parameter is left after parsing command options.

Fix it by testing the length of $1 instead of $@

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 18:42:38 -07:00
Linus Torvalds 27c1ee3f92 Merge branch 'akpm' (Andrew's patch-bomb)
Merge Andrew's first set of patches:
 "Non-MM patches:

   - lots of misc bits

   - tree-wide have_clk() cleanups

   - quite a lot of printk tweaks.  I draw your attention to "printk:
     convert the format for KERN_<LEVEL> to a 2 byte pattern" which
     looks a bit scary.  But afaict it's solid.

   - backlight updates

   - lib/ feature work (notably the addition and use of memweight())

   - checkpatch updates

   - rtc updates

   - nilfs updates

   - fatfs updates (partial, still waiting for acks)

   - kdump, proc, fork, IPC, sysctl, taskstats, pps, etc

   - new fault-injection feature work"

* Merge emailed patches from Andrew Morton <akpm@linux-foundation.org>: (128 commits)
  drivers/misc/lkdtm.c: fix missing allocation failure check
  lib/scatterlist: do not re-write gfp_flags in __sg_alloc_table()
  fault-injection: add tool to run command with failslab or fail_page_alloc
  fault-injection: add selftests for cpu and memory hotplug
  powerpc: pSeries reconfig notifier error injection module
  memory: memory notifier error injection module
  PM: PM notifier error injection module
  cpu: rewrite cpu-notifier-error-inject module
  fault-injection: notifier error injection
  c/r: fcntl: add F_GETOWNER_UIDS option
  resource: make sure requested range is included in the root range
  include/linux/aio.h: cpp->C conversions
  fs: cachefiles: add support for large files in filesystem caching
  pps: return PTR_ERR on error in device_create
  taskstats: check nla_reserve() return
  sysctl: suppress kmemleak messages
  ipc: use Kconfig options for __ARCH_WANT_[COMPAT_]IPC_PARSE_VERSION
  ipc: compat: use signed size_t types for msgsnd and msgrcv
  ipc: allow compat IPC version field parsing if !ARCH_WANT_OLD_COMPAT_IPC
  ipc: add COMPAT_SHMLBA support
  ...
2012-07-30 17:25:34 -07:00
Akinobu Mita c24aa64d16 fault-injection: add tool to run command with failslab or fail_page_alloc
This adds tools/testing/fault-injection/failcmd.sh to run a command while
injecting slab/page allocation failures via fault injection.

Example:

Run a command "make -C tools/testing/selftests/ run_tests" with
injecting slab allocation failure.

	# ./tools/testing/fault-injection/failcmd.sh \
		-- make -C tools/testing/selftests/ run_tests

Same as above except to specify 100 times failures at most instead of
one time at most by default.

	# ./tools/testing/fault-injection/failcmd.sh --times=100 \
		-- make -C tools/testing/selftests/ run_tests

Same as above except to inject page allocation failure instead of slab
allocation failure.

	# env FAILCMD_TYPE=fail_page_alloc \
		./tools/testing/fault-injection/failcmd.sh --times=100 \
		-- make -C tools/testing/selftests/ run_tests

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-30 17:25:22 -07:00
Akinobu Mita d89dffa976 fault-injection: add selftests for cpu and memory hotplug
This adds two selftests

* tools/testing/selftests/cpu-hotplug/on-off-test.sh is testing script
for CPU hotplug

1. Online all hot-pluggable CPUs
2. Offline all hot-pluggable CPUs
3. Online all hot-pluggable CPUs again
4. Exit if cpu-notifier-error-inject.ko is not available
5. Offline all hot-pluggable CPUs in preparation for testing
6. Test CPU hot-add error handling by injecting notifier errors
7. Online all hot-pluggable CPUs in preparation for testing
8. Test CPU hot-remove error handling by injecting notifier errors

* tools/testing/selftests/memory-hotplug/on-off-test.sh is doing the
similar thing for memory hotplug.

1. Online all hot-pluggable memory
2. Offline 10% of hot-pluggable memory
3. Online all hot-pluggable memory again
4. Exit if memory-notifier-error-inject.ko is not available
5. Offline 10% of hot-pluggable memory in preparation for testing
6. Test memory hot-add error handling by injecting notifier errors
7. Online all hot-pluggable memory in preparation for testing
8. Test memory hot-remove error handling by injecting notifier errors

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Greg KH <greg@kroah.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-30 17:25:22 -07:00
Steven Rostedt 8fddbe9bbf ktest: Allow perl regex expressions in conditional statements
Add '=~' and '!~' to the list of allowed conditionals for DEFAULT and
TEST_START section if statements.

ie.

 TEST_START IF TEST =~ .*test$

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-30 14:37:01 -04:00
Steven Rostedt 9b1d367dbb ktest: Ignore errors it tests if IGNORE_ERRORS is set
The option IGNORE_ERRORS is used to allow a test to succeed even if a
warning appears from the kernel. Sometimes kernels will produce warnings
that are not associated with a test, and the user wants to test
something else.

The IGNORE_ERRORS works for boot up, but was not preventing test runs to
succeed if the kernel produced a warning.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-30 14:33:55 -04:00
Steven Rostedt c1434dcc57 ktest: Reset saved min (force) configs for each test
The min configs are saved in a perl hash called force_configs, and this
hash is used to add configs to the .config file. But it was not being
reset between tests and a min config from a previous test would affect
the min config of the next test causing undesirable results.

Reset the force_config hash at the start of each test.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-20 22:39:16 -04:00
Steven Rostedt 8a80c72711 ktest: Add check for bug or panic during reboot
Usually the target is booted into a dependable kernel when a test
starts. The test will install the test kernel and reboot the box. But
there may be a time that the kernel is running an unreliable kernel and
the reboot may crash.

Have ktest detect crashes on a reboot and force a power-cycle instead.

This can usually happen if a test kernel was installed to run manual
tests, but the user forgot to reboot to the known good kernel.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-19 16:11:21 -04:00
Steven Rostedt 407b95b7a0 ktest: Add MAX_MONITOR_WAIT option
If the console is constantly outputting content, this can cause ktest
to get stuck waiting on the monitor to settle down.

The option MAX_MONITOR_WAIT is the maximum time (in seconds) for ktest
to wait for the console to flush.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-19 16:05:42 -04:00
Steven Rostedt cf79fab676 ktest: Fix config bisect with how make oldnoconfig works
With a name like 'oldnoconfig' one may think that the config generated
would disable all configs that were not defined (selecting "no" for all
options). But this is not the case. It selects the default. If a config
has a 'default y', then it is added if not specified.

This broke the config bisect, because options not specified by a config
will just use the default, where it expected to turn off. This caused an
option to be enabled that disabled an option that would break the build.
The end result was that we never found the bad config at the end of the
test.

Instead of using 'make oldnoconfig', ktest now builds the options it
expects enabled and disabled. When it turns off an option, it will no
longer remove it, but actually set it to:

 # CONFIG_FOO is not set.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-19 15:29:43 -04:00
Steven Rostedt b091861254 ktest: Add CONFIG_BISECT_CHECK option
The config-bisect can take a bad config and bisect it down to find out
what config actually breaks the config. But as all tests will apply a
minconfig (defined by a user) to apply before booting, it is possible
that the minconfig could actually make the bad config work (minconfigs
can disable configs). The end result is that the config bisect test will
not find a config that breaks. This can be rather frustrating to the
user.

The CONFIG_BISECT_CHECK option, when set to 1, will make sure that the
bad config (with the minconfig applied) still fails before trying to
bisect.

And yes, I did get burned by this.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-19 15:26:00 -04:00
Steven Rostedt e5c2ec11a0 ktest: Add PRE_INSTALL option
Add the PRE_INSTALL option that will allow a user to specify a shell
command to be executed before the install operation executes.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-19 15:22:05 -04:00
Steven Rostedt 921ed4c720 ktest: Add PRE/POST_KTEST and TEST options
In order to let the user add commands before and after ktest runs, the
PRE_KTEST and POST_KTEST options are defined. They hold shell commands
that will execute befor ktest runs its first test, as well as when it
completed its last test.

The PRE_TEST and POST_TEST will be run befor and after (respectively)
for a given test. They can either be global (done for all tests) or
defined by a single test.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-19 15:18:27 -04:00
Steven Rostedt 958d8435c2 ktest: Remove commented exit
A debug 'exit' was left in ktest.pl. Remove it.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-19 15:17:23 -04:00
Cyrill Gorcunov d97b46a646 syscalls, x86: add __NR_kcmp syscall
While doing the checkpoint-restore in the user space one need to determine
whether various kernel objects (like mm_struct-s of file_struct-s) are
shared between tasks and restore this state.

The 2nd step can be solved by using appropriate CLONE_ flags and the
unshare syscall, while there's currently no ways for solving the 1st one.

One of the ways for checking whether two tasks share e.g.  mm_struct is to
provide some mm_struct ID of a task to its proc file, but showing such
info considered to be not that good for security reasons.

Thus after some debates we end up in conclusion that using that named
'comparison' syscall might be the best candidate.  So here is it --
__NR_kcmp.

It takes up to 5 arguments - the pids of the two tasks (which
characteristics should be compared), the comparison type and (in case of
comparison of files) two file descriptors.

Lookups for pids are done in the caller's PID namespace only.

At moment only x86 is supported and tested.

[akpm@linux-foundation.org: fix up selftests, warnings]
[akpm@linux-foundation.org: include errno.h]
[akpm@linux-foundation.org: tweak comment text]
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Vasiliy Kulikov <segoon@openwall.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Valdis.Kletnieks@vt.edu
Cc: Michal Marek <mmarek@suse.cz>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 17:49:32 -07:00
Doug Ledford 7820b0715b tools/selftests: add mq_perf_tests
Add the mq_perf_tests tool I used when creating my mq performance patch.
Also add a local .gitignore to keep the binaries from showing up in git
status output.

[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: Doug Ledford <dledford@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 17:49:31 -07:00
Doug Ledford 50069a5851 selftests: add mq_open_tests
Add a directory to house POSIX message queue subsystem specific tests.
Add first test which checks the operation of mq_open() under various
corner conditions.

Signed-off-by: Doug Ledford <dledford@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Joe Korty <joe.korty@ccur.com>
Cc: Amerigo Wang <amwang@redhat.com>
Cc: Serge E. Hallyn <serue@us.ibm.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 17:49:31 -07:00
Jesper Juhl 11c38b7575 ktest: Change singular "paranthesis" to plural "parentheses"
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-23 10:19:09 -04:00
Steven Rostedt 24d0c03014 ktest: Add README to explain what is in the examples directory
Add a README that explains what the different example configs in the
ktest example directory are about.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-22 00:15:12 -04:00
Steven Rostedt b6d300361b ktest: Add the snowball.conf example config
I used the snowball.conf in a live demo that demonstrated how to use
ktest.pl with a snowball ARM board. I've been asked to included that
config in the ktest repository.

Here it is.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-22 00:13:32 -04:00
Steven Rostedt 2e10952622 ktest: Add an example config that does cross compiling of several archs
Add the config that I use to test several archs. I downloaded several
cross compilers from:

 http://kernel.org/pub/tools/crosstool/files/bin/x86_64/

and this config is an example to crosscompile several archs to make sure
that your changes do not break archs that you are not working on.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-22 00:11:00 -04:00
Steven Rostedt 3a7bef7917 ktest: Add kvm.conf example config
Add an example config that explains how to use ktest with a virtual
guest as the target.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-22 00:10:12 -04:00
Steven Rostedt 6d76f469c8 ktest: Add useful example configs
I've been asked several times to provide more useful example configs for
ktest.pl, as the sample.conf is too complex (because it explains all
configs). This adds configs broken up by use case, and these configs are
based on actual configs that I use on a daily basis.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-22 00:08:30 -04:00
Steven Rostedt 43de3316e9 ktest: Add USE_OUTPUT_MIN_CONFIG to avoid prompt on make_min_config
If the file that OUTPUT_MIN_CONFIG exists then ktest.pl will prompt the
user and ask them if the OUTPUT_MIN_CONFIG should be used as the
starting point for make_min_config instead of MIN_CONFIG.

This is usually the case, and to allow the user to do so, which is
helpful if the user is creating different min configs based on tests,
and they know one is a superset of another test, they can set
USE_OUTPUT_MIN_CONFIG to one, which will prevent kest.pl from prompting
to use the OUTPUT_MIN_CONFIG and it will just use it.

If USE_OUTPUT_MIN_CONIFG is set to zero, then ktest.pl will continue to
use MIN_CONFIG instead.

The default is that USE_OUTPUT_MIN_CONFIG is undefined.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-22 00:07:34 -04:00
Steven Rostedt ccc513b688 ktest: Add MIN_CONFIG_TYPE to allow making a minum .config that has network
Add a MIN_CONFIG_TYPE that can be set to 'test' or 'boot'. The default
is 'boot' which is what make_min_config has done previously: makes a
config file that is the minimum needed to boot the target.

But when MIN_CONFIG_TYPE is set to 'test', not only must the target
boot, but it must also successfully run the TEST. This allows the
creation of a config file that is the minimum to boot and also
perform ssh to the target, or anything else a developer wants.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-21 17:13:40 -04:00
Steven Rostedt 683a3e6481 ktest: Fix kernelrevision with POST_BUILD
The PRE_BUILD and POST_BUILD options of ktest are added to allow the
user to add temporary patch to the system and remove it on builds. This
is sometimes use to take a change from another git branch and add it to
a series without the fix so that this series can be tested, when an
unrelated bug exists in the series.

The problem comes when a tagged commit is being used. For example, if
v3.2 is being tested, and we add a patch to it, the kernelrelease for
that commit will be 3.2.0+, but without the patch the version will be
3.2.0. This can cause problems when the kernelrelease is determined for
creating the /lib/modules directory. The kernel booting has the '+' but
the module directory will not, and the modules will be missing for that
boot, and may not allow the kernel to succeed.

The fix is to put the creation of the kernelrelease in the POST_BUILD
logic, before it applies the POST_BUILD operation. The POST_BUILD is
where the patch may be removed, removing the '+' from the kernelrelease.

The calculation of the kernelrelease will also stay in its current
location but will be ignored if it was already calculated previously.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-18 14:27:51 -04:00
Steven Rostedt 759a3cc625 ktest: Fix reboot on success stopping all reboots
The change to let individual tests decide to reboot the machine on
success of the entire test also prevented errors from rebooting
when an error was detected.

The "no_reboot" variable was only cleared if the test had
reboot_on_success set. But the no_reboot variable also prevents the test
rebooting when an error was detected even when REBOOT_ON_ERROR was set.

Add a new "reboot_success" variable that is used to determine if the
test should reboot on success and not touch the no_reboot variable.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-01 08:25:48 -04:00
Russ Dill 5158ba3ea7 ktest.pl: Fix combined usage of BISECT_REVERSE and BISECT_SKIP
When BISECT_REVERSE and BISECT_SKIP are used together with boot or test
testing, build failures are treated as boot or test failures and
'git bisect bad' is executed instead of 'git bisect skip'. This is because
the $ret value of -1 is treated as a build failure, but the $reverse_bisect
logic does not properly handle this.

Simple fix, only invert it if it is positive.

Link: http://lkml.kernel.org/r/1335235380-8509-1-git-send-email-Russ.Dill@ti.com

Signed-off-by: Russ Dill <Russ.Dill@ti.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-01 08:25:44 -04:00
Dave Young f0f57b2b14 mm: move hugepage test examples to tools/testing/selftests/vm
hugepage-mmap.c, hugepage-shm.c and map_hugetlb.c in Documentation/vm are
simple pass/fail tests, It's better to promote them to
tools/testing/selftests.

Thanks suggestion of Andrew Morton about this.  They all need firstly
setting up proper nr_hugepages and hugepage-mmap need to mount hugetlbfs.
So I add a shell script run_vmtests to do such work which will call the
three test programs and check the return value of them.

Changes to original code including below:
a. add run_vmtests script
b. return error when read_bytes mismatch with writed bytes.
c. coding style fixes: do not use assignment in if condition

[akpm@linux-foundation.org: build the targets before trying to execute them]
[akpm@linux-foundation.org: Documentation/vm/ no longer has a Makefile. Fixes "make clean"]
Signed-off-by: Dave Young <dyoung@redhat.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-28 17:14:37 -07:00
Andrew Morton cab6b05600 selftests/Makefile: make `run_tests' depend on `all'
So a "make run_tests" will build the tests before trying to run them.

Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-28 17:14:37 -07:00
Frederic Weisbecker f467f71403 selftests: launch individual selftests from the main Makefile
Remove the run_tests script and launch the selftests by calling "make
run_tests" from the selftests top directory instead.  This delegates to
the Makefile in each selftest directory, where it is decided how to launch
the local test.

This removes the need to add each selftest directory to the now removed
"run_tests" top script.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-28 17:14:37 -07:00
Linus Torvalds f0a5ec0e8d ktest for v3.4
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPafMcAAoJEIy3vGnGbaoALNUQAMZ8G+WDXD/RKtsO4V41rWOa
 vCCUQ6BDTld53fLdTMwYBH9Uev9LLsQ/itOp8ne/apVn5DCghqm1rAfd5sIk9TaQ
 zqnvF8QvZXnPCbUZe8mXH4ki2Shh+mvxkucAtsC9C4RBcu8QloIy7UGZPioEVxYj
 TiadqKNicvSSIvEy3fM98qzbVu+GZZpZwfH0asiWV4rxLLovWNn2Ly7BGPLLHWa8
 iamWVyG9QS51MzyEAxo4LBWGA4aK0k6+W5QxK2SmruA7g0YWzBf3DU5CfsXncj43
 eOs/aVkBApPPIJ/VQDuhbdHAY+wIQAItojVAbSdebv0xC4SDtLbHHAgMVNtgLOIa
 ysfLI+h8APbOh4nyqwNh5FuSnew4QvR1ZW47bZHmN7K7NjmcJ93geEvt//7eQnxz
 X0iWJSCwAOyKORgsPU0lZgGM1lD50Qtmt1IZX5T87ksDSIhx5Lk/pAQo43nByj3g
 e53swGxIQyaUqJwQ5ItJh7e8jQBZ6eyZDEWslro2S6uV9MFJnrH+cJJSk4LqO94y
 dTu4uk/aCyXH3fbk1qfincfn5bzCvlrbSMsldbU6ODLFqyr8R1I8kcTZy/2k3i4q
 eURDh94D6HEuu/QL1NvB5dKkuOfxmH3dr3S/5xv/IfIxruC+N+jGns0rmoFiE0KO
 pnThls+OFAXhrw7YhV2d
 =2NU4
 -----END PGP SIGNATURE-----

Merge tag 'ktest-v3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest

Pull ktest changes from Steven Rostedt.

* tag 'ktest-v3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Allow a test to override REBOOT_ON_SUCCESS
  ktest: Fix SWITCH_TO_GOOD to also reboot the machine
  ktest: Add SCP_TO_TARGET_INSTALL option
  ktest: Add warning when bugs are ignored
  ktest: Add INSTALL_MOD_STRIP=1 when installing modules
2012-03-23 09:28:45 -07:00
Steven Rostedt 648a182c61 ktest: Allow a test to override REBOOT_ON_SUCCESS
The option REBOOT_ON_SUCCESS is global, and will have the machine reboot
the the box if all tests are successful. But a test may not want the
machine to reboot, and perhaps have the kernel it loaded be used to
install the next kernel. Or the last test may set up a kernel that the
user may want to look at. In this case, the user could have the global
option REBOOT_ON_SUCCESS be true, but if a test is defined to run at the
end, that test can override the global option and keep the kernel it
installed for the user to log in with.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-03-21 11:18:27 -04:00
Steven Rostedt 769df641cc ktest: Fix SWITCH_TO_GOOD to also reboot the machine
When the option SWITCH_TO_GOOD is set, it will be called when the system
needs to reboot to the good server. But currently, this keeps the reboot
from happening. The SWITCH_TO_GOOD is just a way to get to a new kernel,
it may not mean to not reboot.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-03-21 08:24:57 -04:00
Steven Rostedt 02ad261704 ktest: Add SCP_TO_TARGET_INSTALL option
Currently the option used to scp both the modules to the target as well
as the kernel image are the same (SCP_TO_TARGET). But some embedded
boards may require them to be different. The modules may need to be put
directly on the board, but the kernel image may need to go to a
tftpserver.

Add the option SCP_TO_TARGET_INSTALL that will allow the user to change
the config so that they may have the modules and image got to different
machines.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-03-21 08:21:24 -04:00
Steven Rostedt 6ca996cc7c ktest: Add warning when bugs are ignored
When IGNORE_ERRORS is set, ktest will not fail a test if a backtrace
is detected. But this can be an issue if the user added it in the
config but forgot to remove it. They may be left wondering why their
test did not fail, or even worse, why their bisect gave the wrong
commit.

Add a warning in the output if IGNORE_WARNINGS is set, and ktest detects
a kernel error.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-03-21 08:18:35 -04:00
Steven Rostedt 627977d83a ktest: Add INSTALL_MOD_STRIP=1 when installing modules
To keep the modules from bloating the target's filesystem
strip them during the install.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-03-21 08:16:15 -04:00
Linus Torvalds 69a7aebcf0 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree from Jiri Kosina:
 "It's indeed trivial -- mostly documentation updates and a bunch of
  typo fixes from Masanari.

  There are also several linux/version.h include removals from Jesper."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (101 commits)
  kcore: fix spelling in read_kcore() comment
  constify struct pci_dev * in obvious cases
  Revert "char: Fix typo in viotape.c"
  init: fix wording error in mm_init comment
  usb: gadget: Kconfig: fix typo for 'different'
  Revert "power, max8998: Include linux/module.h just once in drivers/power/max8998_charger.c"
  writeback: fix fn name in writeback_inodes_sb_nr_if_idle() comment header
  writeback: fix typo in the writeback_control comment
  Documentation: Fix multiple typo in Documentation
  tpm_tis: fix tis_lock with respect to RCU
  Revert "media: Fix typo in mixer_drv.c and hdmi_drv.c"
  Doc: Update numastat.txt
  qla4xxx: Add missing spaces to error messages
  compiler.h: Fix typo
  security: struct security_operations kerneldoc fix
  Documentation: broken URL in libata.tmpl
  Documentation: broken URL in filesystems.tmpl
  mtd: simplify return logic in do_map_probe()
  mm: fix comment typo of truncate_inode_pages_range
  power: bq27x00: Fix typos in comment
  ...
2012-03-20 21:12:50 -07:00
Linus Torvalds 586c6e7013 While demoing ktest at ELC in 2012, it was embarrassing that the
make_min_config test failed to work because the snowball board I was tesing
 it against had a config that would not build. But the make_min_config
 only tested the testing part and ignored build failures. The end result
 was a config file that would not boot.
 
 This time, for real.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPTBMbAAoJEIy3vGnGbaoACVAQAONDPEJZZgvtsqgLkNrqBsym
 /Z+SH+eAtJVHEMgvBMHh5fLSkccTZKM8jyi1b/iEsbmzZY3tVuDrvZ8YJYk+lcdO
 PUrIkSIhySxwenD8oqY3rmKNS3UhcmFG7rQGLfNPuQC8yorMaANHDqpVs4uauhWQ
 jgvUAGwoacqNxsH+dON4g3aVSbCZrIa1M7IqvjOQlaX5j6BppVFE1dAp12060q1b
 AjsZgNaTGUQxbZzEikIPDq7ey0RW180CtYriL8xZgRZMN0ly+7wvDYefCZQvNjRx
 9v4aCUKZoc2bFCGD+haU9HKkkKHEVw3C2I8YV16ImcY3wmuYCEYGoqtZBFJfuPXQ
 0JYj6jrh2g4XnKQ/uekf7hyHYHW7NNb5rbHJExrk4gQTNKUSS3fbrGTK1KZW0+TH
 gXaSJHce+0d1iDZkmgKsGinU5hKoas4z0X4yEtCFHI3kKJGLnN7eNv0yYPheUtKu
 MsacHK1Yyu6wtedpclo5sWZl/ynQ6nrviE33nNqKTUstcZMqU4U6AXZrW2sNkX+3
 6sbCwQlEOhlqyaxzKzOHB5ezR6WzcPAXLIV7m041573znXHjL9AQx+SwcvVVLxuN
 l83L5JA69pB3nKqzGjjJgnAQt1aeEVgYuO1Q2MxgrHwEbnnanG/jcDVVT5pXCFAP
 ikoyZ5rzFZmzEXXcAR7h
 =wlL8
 -----END PGP SIGNATURE-----

Merge tag 'ktest-fix-make-min-failed-build-for-real' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest

While demoing ktest at ELC in 2012, it was embarrassing that the
make_min_config test failed to work because the snowball board I was
testing it against had a config that would not build.  But the
make_min_config only tested the testing part and ignored build failures.
The end result was a config file that would not boot.

This time, for real.

* tag 'ktest-fix-make-min-failed-build-for-real' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Fix make_min_config test when build fails
2012-02-27 15:43:05 -08:00
Steven Rostedt bf1c95abaf ktest: Fix make_min_config test when build fails
The make_min_config does not take into account when the build fails,
resulting in a invalid MIN_CONFIG .config file. When the build fails,
it is ignored and the boot test is executed, using the previous built
kernel. The configs that should be tested are not tested and they may
be added or removed depending on the result of the last kernel that
succeeded to be built.

If the build fails, mark the current config as a failure and the
configs that were disabled may still be needed.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-27 13:58:49 -05:00
Masanari Iida f9dee311e5 tools: Fix typo in ktest.pl
Correct spelling "faied" to "failed" in
tools/testing/ktest/ktest.pl

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-21 11:40:35 +01:00
Linus Torvalds 5d48421be3 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Add INGORE_ERRORS to ignore warnings in boot up
  ktest: Still do reboot even for REBOOT_TYPE = script
  ktest: Fix compare script to test if options are not documented
  ktest: Detect typos in option names
  ktest: Have all values be set by defaults
  ktest: Change initialization of defaults hash to perl format
  ktest: Add options SWITCH_TO_GOOD and SWITCH_TO_TEST
  ktest: Allow overriding bisect test results
  ktest: Evaluate options before processing them
  ktest: Evaluate $KERNEL_VERSION in both install and post install
  ktest: Only ask options needed for install
  ktest: When creating a new config, ask for BUILD_OPTIONS
  ktest: Do not ask for some options if the only test is build
  ktest: Ask for type of test when creating a new config
  ktest: Allow bisect test to restart where it left off
  ktest: When creating new config, allow the use of ${THIS_DIR}
  ktest: Add default for ssh-user, build-target and target-image
  ktest: Allow success logs to be stored
  ktest: Save test output
2012-01-16 17:53:27 -08:00
Frederic Weisbecker 85bbddc37b selftests: new x86 breakpoints selftest
Bring a first selftest in the relevant directory.  This tests several
combinations of breakpoints and watchpoints in x86, as well as icebp traps
and int3 traps.  Given the amount of breakpoint regressions we raised
after we merged the generic breakpoint infrastructure, such selftest
became necessary and can still serve today as a basis for new patches that
touch the do_debug() path.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-12 20:13:12 -08:00
Frederic Weisbecker 274343ad3e selftests: new very basic kernel selftests directory
Bring a new kernel selftests directory in tools/testing/selftests.  To
add a new selftest, create a subdirectory with the sources and a
makefile that creates a target named "run_test" then add the
subdirectory name to the TARGET var in tools/testing/selftests/Makefile
and tools/testing/selftests/run_tests script.

This can help centralizing and maintaining any useful selftest that
developers usually tend to let rust in peace on some random server.

Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-12 20:13:12 -08:00
Linus Torvalds 98793265b4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (53 commits)
  Kconfig: acpi: Fix typo in comment.
  misc latin1 to utf8 conversions
  devres: Fix a typo in devm_kfree comment
  btrfs: free-space-cache.c: remove extra semicolon.
  fat: Spelling s/obsolate/obsolete/g
  SCSI, pmcraid: Fix spelling error in a pmcraid_err() call
  tools/power turbostat: update fields in manpage
  mac80211: drop spelling fix
  types.h: fix comment spelling for 'architectures'
  typo fixes: aera -> area, exntension -> extension
  devices.txt: Fix typo of 'VMware'.
  sis900: Fix enum typo 'sis900_rx_bufer_status'
  decompress_bunzip2: remove invalid vi modeline
  treewide: Fix comment and string typo 'bufer'
  hyper-v: Update MAINTAINERS
  treewide: Fix typos in various parts of the kernel, and fix some comments.
  clockevents: drop unknown Kconfig symbol GENERIC_CLOCKEVENTS_MIGR
  gpio: Kconfig: drop unknown symbol 'CS5535_GPIO'
  leds: Kconfig: Fix typo 'D2NET_V2'
  sound: Kconfig: drop unknown symbol ARCH_CLPS7500
  ...

Fix up trivial conflicts in arch/powerpc/platforms/40x/Kconfig (some new
kconfig additions, close to removed commented-out old ones)
2012-01-08 13:21:22 -08:00
Steven Rostedt be405f95f0 ktest: Add INGORE_ERRORS to ignore warnings in boot up
When testing a kernel that has warnings, ktest.pl will fail the test
when it sees the warning. If you need to test the the kernel and want
to ignore the errors that are produced, the option IGNORE_ERRORS has
been added. When IGNORE_ERRORS is set to something other than 0, it will
ignore call traces due to WARN_ON().

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-01-04 21:56:49 -05:00
Steven Rostedt 96f6a0df19 ktest: Still do reboot even for REBOOT_TYPE = script
The REBOOT_TYPE may be either grub or script, if it is script
it is expected that a REBOOT_SCRIPT is defined.

With the SWITCH_TO_TEST which is the complement of SWITCH_TO_GOOD,
which does basically the same thing as REBOOT_SCRIPT and but for
both grub and script, the REBOOT_SCRIPT does not need to be mandatory
anymore.

Do not require the REBOOT_SCRIPT and always run the reboot code
for both grub and script.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-01-04 21:47:16 -05:00
Al Viro d36b691077 misc latin1 to utf8 conversions
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-01-02 13:04:55 +01:00
Steven Rostedt c2857cb4a8 ktest: Fix compare script to test if options are not documented
The compare script compare-ktest-sample.pl checks for options
that are defined in ktest.pl and not documented in samples.conf,
as well as samples in samples.conf that are not used in ktest.pl.

With the switch to the hash format to initialize the ktest variables
the compare script needs to be updated to handle the change.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 22:06:59 -05:00
Steven Rostedt 9cc9e091ed ktest: Detect typos in option names
It becomes quite annoying when you go to run a test and then
realize that you typed an option name wrong, and the test starts
doing the default action and not what you expected it to do.

It is even more annoying when you wake up the next day after
running the test over night when you discover this.

By testing if all options specified in a config file are
used by either ktest or were used in one of the option's values
we can see if there are any dangling options that were not used.
In such a case, show the user the options that were not used
and ask them if they want to continue or not.

The option IGNORE_UNUSED was also added to allow the user to
override this feature.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22 22:02:35 -05:00